Flight dynamics and stability of kites in steady and unsteady wind conditions

The flight dynamics and stability of a kite with a single main line flying in steady and unsteady wind conditions are discussed. A simple dynamic model with five degrees of freedom is derived with the aid of Lagrangian formulation, which explicitly avoids any constraint force in the equations of motion. The longitudinal and lateral–directional modes and stability of the steady flight under constant wind conditions are analyzed by using both numerical and analytical methods. Taking advantage of the appearance of small dimensionless parameters in the model, useful analytical formulas for stable-designed kites are found. Under nonsteady wind-velocity conditions, the equilibrium state disappears and periodic orbits occur. The kite stability and an interesting resonance phenomenon are explored with the aid of a numerical method based on Floquet theory.

Operational water balance in irrigation districts

In pressure irrigation-water distribution networks, applied water volume is usually controlled opening a valve during a calculated time interval, and assuming constant flow rate. In general, pressure regulating devices for controlling the discharged flow rate by irrigation units are needed due to the variability of pressure conditions.

PAH occurrence during combustion of biodiesel from various feedstocks

PAHs are pollutants of concern since they are known carcinogenic compounds. Their occurrence is mainly related to combustion or pyrolysis of organic matter such as fossil fuels. In the current scenario where biofuels are growingly important, it is also necessary to characterize PAH emissions due to their combustion. There are a number of works concerning PAH emissions from biodiesel combustion in Diesel engines, however, there are few regarding the difference between them depending on the feedstock and type of alcohol used in the transesterification. The authors have processed and characterized biodiesel from several feedstocks (Le. tallow, palm, rapeseed, soy-bean, coconut, peanut and linseed oils) to obtain FAME and FAEE and they have developed a method to measure the PAHs originated during their combustion in a bomb calorimeter. The tests have been carried out under different oxygen pressure conditions, and samples have been c1eaned from the bomb after each one of these tests. The samples have been prepared for GC-MS analysis, where PAH quantities among some other combustion products have been assessed. This work shows statistical relations obtained between the measured amounts of 18 PAHs of concern and the composition (oil and type of alcohol) used to obtain the biodiesel, and also the oxygen pressure during combustion.

Estudio del rendimiento bajo presión en los tiros libres en baloncesto, y su influencia sobre el porcentaje de acierto durante el último minuto de juego

El minuto final de un partido ajustado de baloncesto es un momento crítico que está sujeto a multitud de factores que influyen en su desarrollo. Así, el porcentaje de acierto en los tiros libres durante ese periodo de tiempo va a determinar, en muchas ocasiones, el resultado final del partido. La disminución de rendimiento (drop) en esta faceta de juego en condiciones de presión, puede estar relacionada con múltiples variables propias del contexto deportivo estudiado, como por ejemplo: los segundos restantes de posesión, la situación en el marcador (ir ganando, empatando o perdiendo), la localización del partido (jugar en casa o fuera), la fase de competición (fase regular o eliminatorias) o el nivel del equipo (mejores/peores equipos). Además, las características del jugador que realiza los lanzamientos tienen una gran importancia respecto a su edad y años de experiencia para afrontar los momentos críticos, así como el puesto de juego que ocupa en el equipo. En este sentido, la combinación de factores del contexto y del jugador, permiten interactuar en el rendimiento del lanzador en los momentos finales de partido durante sus lanzamientos de tiro libre. El presente trabajo de tesis doctoral tiene como objetivo encontrar aquellas variables más relacionadas con la disminución de rendimiento del jugador en los tiros libres durante el último minuto de juego, y la última serie de tiros libres en los partidos ajustados de baloncesto. Para alcanzar el objetivo del estudio se analizaron 124 partidos ajustados (diferencias iguales o inferiores a 2 puntos) de todas las competiciones (fase regular, playoff y copa del Rey) de la liga ACB durante las temporadas 2011-2012 a 2014-2015. Para el registro de variables se analizó el porcentaje de acierto en los tiros libres del lanzador en la liga regular, partido completo, último minuto y última serie. De este modo se trató de analizar qué variables del contexto y del jugador permitían explicar el rendimiento en los tiros libres durante el último minuto, y la última serie de tiros libres del partido. Por otro lado, se trató de conocer el grado de asociación entre el descenso del rendimiento (drop) en los momentos finales de partido, y las variables estudiadas del jugador: puesto de juego, edad, y años de experiencia profesional; mientras que las variables situacionales consideradas fueron: fase de competición, localización, clasificación, tiempo restante, y diferencia parcial en el marcador. Para el análisis de los datos se realizaron dos modelos estadísticos: 1º) un modelo de regresión lineal múltiple para conocer el efecto de las variables independientes en el porcentaje de aciertos del lanzador en el último minuto, y en la última serie de tiros libres del partido; y 2º) un análisis de regresión logística binomial para analizar la relación existente entre la probabilidad de tener un drop (disminución del rendimiento) y las características del lanzador, y las variables situacionales. Los resultados del modelo de regresión lineal múltiple mostraron efectos negativos significativos en el porcentaje de acierto en los tiros libres durante el último minuto, cuando los lanzadores son los pívots (-19,45%). Por otro lado, los resultados durante la última serie mostraron el efecto negativo significativo sobre la posición de pívot (- 19,30%) y la diferencia parcial en el marcador (-3,33%, para cada punto de diferencia en el marcador) en el porcentaje de acierto en los tiros libres. Las variables independientes edad, experiencia profesional, clasificación en la liga regular, fase de competición, localización, y tiempo restante, no revelaron efectos significativos en los modelos de regresión lineal. Los resultados de la regresión logística binomial revelaron que las variables experiencia profesional entre 13 y 18 años (OR = 4,63), jugar de alero (OR = 23,01), y jugar de base (OR = 10,68) están relacionadas con una baja probabilidad de disminuir el rendimiento durante el último minuto del partido; mientras que ir ganando, aumenta esta probabilidad (OR = 0,06). Además, los resultados de la última serie mostraron una menor disminución del rendimiento del jugador cuando tiene entre 13 y 18 años de experiencia (OR = 4,28), y juega de alero (OR = 8,06) o base (OR = 6,34). Por el contrario, las variables situacionales relacionadas con esa disminución del rendimiento del jugador son las fases eliminatorias (OR = 0,22) e ir ganando (OR = 0,04). Los resultados principales del estudio mostraron que existe una disminución del rendimiento del jugador en su porcentaje de acierto en los tiros libres durante el último minuto y en la última serie de lanzamientos del partido, y que está relacionada significativamente con la edad, experiencia profesional, puesto de juego del jugador, y diferencia parcial en el marcador. Encontrando relación también con la fase de competición, durante la última serie de tiros libres del partido. Esta información supone una valiosa información para el entrenador, y su aplicación en el ámbito competitivo real. En este sentido, la creación de simulaciones en el apartado de aplicaciones prácticas, permite predecir el porcentaje de acierto en los tiros libres de un jugador durante los momentos de mayor presión del partido, en base a su perfil de rendimiento. Lo que puede servir para realizar una toma de decisiones más idónea, con el objetivo de lograr el mejor resultado. Del mismo modo, orienta el tipo de proceso de entrenamiento que se ha de seguir, en relación a los jugadores más tendentes al drop, con el objetivo de minimizar el efecto de la presión sobre su capacidad para rendir adecuadamente en la ejecución de los tiros libres, y lograr de esta manera un rendimiento más homogéneo en todos los jugadores del equipo en esta faceta del juego, durante el momento crítico del final de partido. ABSTRACT. The final minute of a close game in basketball is a critical moment which is subject to many factors that influence its development. Thus, the success rate in free-throws during that period will determine, in many cases, the outcome of the game. Decrease of performance (drop) in this facet of play under pressure conditions, may be related to studied own multiple sports context variables, such as the remaining seconds of possession, the situation in the score (to be winning, drawing, or losing) the location of the match (playing at home or away), the competition phase (regular season or playoffs) or team level (best/worst teams). In addition, the characteristics of the player are very important related to his age and years of experience to face the critical moments, as well as his playing position into team. In this sense, the combination of factors in context and player, allows interact about performance of shooter in the final moments of the game during his free-throw shooting. The aim of this present doctoral thesis was find the most related variables to player´s drop in free throws in the last minute of the game and the last row of free-throws in closed games of basketball. To achieve the objective of the study, 124 closed games (less or equal than 2 points difference) were analyzed in every copetition in ACB league (regular season, playoff and cup) from 2011-2012 to 2014-2015 seasons. To record the variables, the percentage of success of the shooter in regular season, full game, last minute, and last row were analyzed. This way, it is tried to analyze which player and context variables explain the free-throw performance in last minute and last row of the game. On the other hand, it is tried to determine the degree of association between decrease of performance (drop) of the player in the final moments, and studied player variables: playing position, age, and years of professional experience; while considered situational variables considered were: competition phase, location, classification, remaining time, and score-line. For data analysis were performed two statistical models: 1) A multiple linear regression model to determine the effect of the independent variables in the succsess percentage of shooter at the last minute, and in the last row of free-throws in the game; and 2) A binomial logistic regression analysis to analyze the relationship between the probability of a drop (lower performance) and the characteristics of the shooter and situational variables. The results of multiple linear regression model showed significant negative effects on the free-throw percentage during last minute, when shooters are centers (-19.45%). On the other hand, results in the last series showed the significant negative effect on the center position (-19.30%) and score-line (-3.33% for each point difference in the score) in the free-throw percentage. The independent variables age, professional experience, ranking in the regular season, competition phase, location, and remaining time, revealed no significant effects on linear regression models. The results of the binomial logistic regression showed that the variables professional experience between 13 and 18 years (OR = 4.63), playing forward (OR = 23.01) and playing guard (OR = 10.68) are related to reduce the probability to decrease the performance during the last minute of the game. While wining, increases it (OR = 0.06). Furthermore, the results of the last row showed a reduction in performance degradation when player is between 13 and 18 years of experience (OR = 4.28), and playing forward (OR = 8.06) or guard (OR = 6.34). By contrast, the variables related to the decrease in performance of the player are the knockout phases (OR = 0.22) and wining (OR = 0.04). The main results of the study showed that there is a decrease in performance of the player in the percentage of success in free-throws in the last minute and last row of the game, and it is significantly associated with age, professional experience, and player position. Finding relationship with the competition phase, during last row of free-throws of the game too. This information is a valuable information for the coach, for applying in real competitive environment. In this sense, create simulations in the section of practical applications allows to predict the success rate of free-throw of a player during the most pressing moments of the game, based on their performance profile. What can be used to take more appropriate decisions in order to achieve the best result. Similarly, guides the type of training process must be followed in relation to the most favorable players to drop, in order to minimize the effect of pressure on their ability to perform properly in the execution of the free-throws. And to achieve, in this way, a more consistent performance in all team players in this facet of the game, during the critical moment in the final of the game.

Estudio y desarrollo del plan de negocio de una empresa: Sistema Web que gestiona e informa sobre las cuentas digitales que el cliente ingresa

El presente documento tiene como objetivo general desarrollar un plan de negocio para analizar la viabilidad de la creación de una nueva empresa, “MyTested S.L.”. Pretende ofrecer una herramienta para que las personas puedan comunicar a sus familiares el acceso a sus cuentas digitales una vez fallecidos. En cuanto a cómo surge la idea, fue a través de una noticia que trataba sobre el derecho al olvido en las redes sociales y en internet. Investigando un poco y prestando atención a los movimientos de las grandes empresas de internet, mi compañero/socio y yo, nos dimos cuenta de que ofrecer este servicio podría valer como negocio, ya que no existe mucha competencia en el mercado. Gracias a eso, nos planteamos en más de una ocasión la posibilidad de montar nuestro propio negocio, de forma que pudiéramos utilizar los conocimientos adquiridos en la universidad como base para crear la herramienta web. Escogimos empezar el proyecto utilizándolo como materia para el trabajo de fin de grado porque nos aporta dos valores muy importantes, ayuda de la comunidad de profesores existentes en la UPM, siendo una persona de gran aporte nuestro tutor Oscar Corcho y también, porque como estamos dedicando todo el tiempo a este proyecto, tener una fecha límite para presentar tanto la parte de modelo de negocio como la parte de desarrollo en una fecha concreta, nos ayuda a planificar y mantener una presión constante sobre el proyecto y así forzar a no abandonarlo ni prolongarlo. Con ello, nos encontramos con dos grupos de dificultades, la escasa formación a nivel empresarial y creación de modelos de negocio y en el ámbito del desarrollo al desconocimiento de tecnologías y APIs de las redes sociales. Al tratarse de una herramienta Web, parte de unos costes muy bajos como el alojamiento del servidor o la contratación temporal de comerciales para publicitar la herramienta entre funerarias y hospitales. Estos factores positivos benefician tanto la realización del proyecto como su avance. Como ya se puede intuir de la lectura del párrafo anterior, el servicio que ofrece la herramienta “MyTested S.L.” está relacionado con el segmento testamental de una persona fallecida, podríamos definirlo como testamento digital. Actualmente, vivimos en un mundo que se centra cada vez más en la parte digital y es por ello, que en un futuro cercano, todas las cuentas que creamos en internet tendrán que ser cerradas o bloqueadas cuando caen en el desuso por el fallecimiento del propietario, es en ese hueco donde podemos situarnos, ofreciendo una herramienta para poder trasladar la información necesaria a las personas elegidas por el cliente para que puedan cerrar o bloquear sus cuentas digitales. Consideramos que existe una interesante oportunidad debido a la escasez de oferta de este tipo de servicios en España y a nivel mundial. En Abril de 2015 hay inscritos en el registro Nacional de últimas voluntades 185.6651 personas por lo que encontramos que un 0,397%1 de las personas en España ha registrado su testamento. El gasto medio al hacer un testamento vital ante notario de tus bienes tiene un coste de 40 a 80 euros2 , este es el principal motivo por el que la mayoría de españoles no realiza su testamento antes de morir. Con este dato obtenemos dos lecciones, lo que la herramienta ofrece no es el documento notarial de los bienes del cliente, sino la sistema, puedan bloquear o cerrar sus cuentas. La segunda lección que obtenemos es que el precio tiene que ser muy reducido para poder llegar a un gran número de personas, añadiendo también el criterio de que el cliente podrá actualizar su información, ya que la información digital es muy fácil de cambiar y frecuente. Como se podrá leer en al apartado dedicado a nuestra visión, misión y valores, aunque estamos convencidos que se puede extraer de la lectura de cualquier parte de este documento, todos nuestros objetivos los queremos conseguir no sólo buscando un enfoque empresarial a nuestro día a día, sino convirtiendo nuestra responsabilidad social sincera, en uno de los retos que más nos ilusionan, fomentando para ello, aspectos como el desarrollo web, estudios de mercado, conocimiento de las necesidades de la población, nuevas tecnologías y negocio. En general, los objetivos que se pretenden cumplir con este estudio son: - Conocer los pasos para crear una empresa - Desarrollar un documento de plan de negocio que contenga lo siguiente: - Análisis de mercado - Definición de productos y/o servicios - Plan de publicidad y expansión (marketing) - Plan financiero - Capacidad para definir los requisitos de una aplicación Web. - Capacidad de elegir la tecnología idónea y actual de un sistema Web. - Conocer el funcionamiento de una empresa y cómo comunicarse con las herramientas gubernamentales. - Comprobar si las posibilidades que nos ofrece el entorno son las adecuadas para nuestras actividades. - Estudio, análisis de la competencia - Definir los diferentes perfiles de cliente para nuestro negocio. - Analizar la viabilidad de nuestro modelo de negocio. Para ello, comenzamos realizando una definición de las características generales del proyecto, detallando cuáles son las motivaciones que han hecho a los emprendedores embarcarse en el mismo, qué servicios ofreceremos a nuestros clientes, el porqué de la elección del sector, así́ como nuestra misión, visión y valores.---ABSTRACT---The goal and aim of the present document is to develop a business plan in order to analyze the viability of build a new enterprise, that we will name MyTested S.L., it wants offer a tool for sharing and to facilitate to the relatives of a dead person the access to the digital accounts. Talking about how come up the idea, it was once a have read a news over the “right of forgotten” throughout social nets and inside internet, researching a little and paying attention to the different movements of the biggest internet companies, my peer ( and partner) and I were aware that to offer this service might be a good business, because does not exist many competitors on this kind of market service, mainly thanks of that, we have planned on several times the possibility to build our owner company, in the way to use the capabilities that we achieved in the University as based to develop and make a web tool. We choose begin this project as subject of our Final Project Degree after analyze the positive and negative point of views: The positive was because it has two main values, firstly the support of the current teachers UPM community, specially our fellow Oscar Corcho and also because we can´t dedicate all our time to this project, so to have a deadline to present either the business model as the develop on time, help us to plan and remain a constant pressure over the project and neither drop out it or extend it more that the necessary. As a web tool, neither the hosting of maintenance or for sort out a net of temporary commercials for visiting hospitals or undertaker´s or insurances, the cost don´t are expensive In the negative side, however, we found twice some main difficulties, the few training as entrepreneur level and how to build a business model and on the other hand the lack of awareness of the technologies and apps of the social net software as well. As summary, these positives facts enhance to work project out and also to develop it. As we could understand reading on the latest paragraph, the service that will do MyTested tool is relation with the testament issue of a dead person, we might call as a digital testament. Currently we are living in world which is focus further on the digital life, for that in a near future every internet accounts should be closed or locked whenever aren´t used by the dead of the owner, this is a market niche (never better said) where we can lead, offering a tool that might transfer the necessary information to the chosen persons by the client in order to allow either close or lock his digital accounts. We are considering that there are interesting opportunities due to the few offers of that kind of service in Spain and at global level. In April 2015 there were 185.6651 persons registered in the Official National last will and testament, this figure mean that the 0,397%1 of the Spaniards citizens have registered their testaments. The average cost of doing the testament of your assets with a Notary is since 40 up to 80€2, this is one of the principal motives because the majority of the Spaniards don´t do it before dead. With these data we might get two lessons, we are not talking about an official notary testament at all, it is only for close or lock the digital accounts by the chosen person by the dead client, and the latest lesson, but not least, the price of our service must be very cheaper in order to achieve touch an important amount of people, knowing also that he client will be able update the information filled, considering that this kind of information is very easy to change and update frequently. As we can read on the stage dedicated to our Vision, Mission and Values, although we are persuaded that can be read in everywhere of this document as well, our aim doesn´t be an business focus on day to day, is also to become our honest social responsibility in this challenge, that is our mainly eagerness, enhancing some aspects as the web development, market research and the knowledge of the population needs, new technologies and new market opportunities. In general the goals that we would like get within this project are: - Achieve the knowledge needs for be an entrepreneurial, and find out the steps for star a business - Achieve market research skills - Products and services definitions - Advertising plan and growth (marketing plan) - Financial plan knowledge - Capability of a web design requirements - Capability for choose the best and actual technology for web design - Knowledge over how work out inside a company and how communicate with official tools. - Check whether the possibilities of the environment are the adequate for our activities. - Research and competitiveness analysis - Define the different profiles of the target for our business. - Analyze the viability of the business model For all that, we began with a definition of the general features of the project, detailing which are the motivations those done to the entrepreneurial get on board, which kind of service we offered to the client, also why the selection of the market sector and our mission, vision and value as well.

Performance of pressure control valves and flow meters precision in operational irrigation-water balance accuracy

In pressure irrigation-water distribution networks, pressure regulating devices for controlling the discharged flow rate by irrigation units are needed due to the variability of flow rate. In addition, applied water volume is used controlled operating the valve during a calculated time interval, and assuming constant flow rate. In general, a pressure regulating valve PRV is the commonly used pressure regulating device in a hydrant, which, also, executes the open and close function. A hydrant feeds several irrigation units, requiring a wide range in flow rate. In addition, some flow meters are also available, one as a component of the hydrant and the rest are placed downstream. Every land owner has one flow meter for each group of field plots downstream the hydrant. Its lecture could be used for refining the water balance but its accuracy must be taken into account. Ideal PRV performance would maintain a constant downstream pressure. However, the true performance depends on both upstream pressure and the discharged flow rate. The objective of this work is to asses the influence of the performance on the applied volume during the whole irrigation events in a year. The results of the study have been obtained introducing the flow rate into a PRV model. Variations on flow rate are simulated by taking into account the consequences of variations on climate conditions and also decisions in irrigation operation, such us duration and frequency application. The model comprises continuity, dynamic and energy equations of the components of the PRV.

Ab initio Methodology for Calculating Elastic Constant and Sound Velocity for Hydrogen and Deuterium in Molecular Solid Phase

Hydrogen isotopes play a critical role both in inertial and magnetic confinement Nuclear Fusion. Since the preferent fuel needed for this technology is a mixture of deuterium and tritium. The study of these isotopes particularly at very low temperatures carries a technological interest in other applications. The present line promotes a deep study on the structural configuration that hydrogen and deuterium adopt at cryogenic temperatures and at high pressures. Typical conditions occurring in present Inertial Fusion target designs. Our approach is aims to determine the crystal structure characteristics, phase transitions and other parameters strongly correlated to variations of temperature and pressure. With this results is possible calculated the elastic constant and sound velocity for hydrogen and deuterium in molecular solid phase.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Pressure measurements of the detachment bubble on the Bolund Island

Pressure measurements on the surface of a 1:230 scale model of Bolund Island are presented. The model is smooth and no boundary layer generation has been considered since the experiment is designed as the simplest possible reference case. Measurement have been taken for a range of Reynolds numbers based on the average undisturbed wind speed U∞ and the maximum height of the island, h [1.7×104, 8.5×104], and for a range of wind directions. Four minutes time series of pressure in more than 400 points have been acquired and analysed to obtain the spatial distribution of both the time average and the variance of the pressure signal. The horizontal extension of the detachment bubble for the different Reynolds numbers and wind directions is identified by isobars and curves of constant value of pressure variance. The applicability of this technique for evaluating the horizontal topology of high turbulence regions associated to detachment bubbles after escarpments in potential wind farm sites is analysed. The results obtained shows that the behaviour of the mean pressure coefficient, Cp, the std. pressure coefficient, Cp, and the skewness of the pressure, Sp can be used to study the bubble over the island to a certain extent. This experiment is part of the set of different analysis on the Bolund test case that is being undertaken within WAUDIT project by the different scientific groups.

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing.

Experimental studies on transitional separated boundary layers

Separated transitional boundary layers appear on key aeronautical processes such as the flow around wings or turbomachinery blades. The aim of this thesis is the study of these flows in representative scenarios of technological applications, gaining knowledge about phenomenology and physical processes that occur there and, developing a simple model for scaling them. To achieve this goal, experimental measurements have been carried out in a low speed facility, ensuring the flow homogeneity and a low disturbances level such that unwanted transitional mechanisms are avoided. The studied boundary layers have been developed on a flat plate, by imposing a pressure gradient by means of contoured walls. They generate an initial acceleration region followed by a deceleration zone. The initial region is designed to obtain at the beginning of the deceleration the Blasius profile, characterized by its momentum thickness, and an edge boundary layer velocity, defining the problem characteristic velocity. The deceleration region is designed to obtain a linear evolution of the edge velocity, thereby defining the characteristic length of the problem. Several experimental techniques, both intrusive (hot wire anemometry, total pressure probes) as nonintrusive (PIV and LDV anemometry, high-speed filming), have been used in order to take advantage of each of them and allow cross-validation of the results. Once the boundary layer at the deceleration beginning has been characterized, ensuring the desired integral parameters and level of disturbance, the evolution of the laminar boundary layer up to the point of separation is studied. It has been compared with integral methods, and numerical simulations. In view of the results a new model for this evolution is proposed. Downstream from the separation, the flow near to the wall is configured as a shear layer that encloses low momentum recirculating fluid. The region where the shear layer remains laminar tends to be positioned to compensate the adverse pressure gradient associated with the imposed deceleration. Under these conditions, the momentum thickness remains almost constant. This laminar shear layer region extends up to where transitional phenomena appear, extension that scales with the momentum thickness at separation. These transitional phenomena are of inviscid type, similar to those found in free shear layers. The transitional region analysis begins with a study of the disturbances evolution in the linear growth region and the comparison of experimental results with a numerical model based on Linear Stability Theory for parallel flows and with data from other authors. The results’ coalescence for both the disturbances growth and the excited frequencies is stated. For the transition final stages the vorticity concentration into vortex blobs is found, analogously to what happens in free shear layers. Unlike these, the presence of the wall and the pressure gradient make the large scale structures to move towards the wall and quickly disappear under certain circumstances. In these cases, the recirculating flow is confined into a closed region saying the bubble is closed or the boundary layer reattaches. From the reattachment point, the fluid shows a configuration in the vicinity of the wall traditionally considered as turbulent. It has been observed that existing integral methods for turbulent boundary layers do not fit well to the experimental results, due to these methods being valid only for fully developed turbulent flow. Nevertheless, it has been found that downstream from the reattachment point the velocity profiles are self-similar, and a model has been proposed for the evolution of the integral parameters of the boundary layer in this region. Finally, the phenomenon known as bubble burst is analyzed. It has been checked the validity of existing models in literature and a new one is proposed. This phenomenon is blamed to the inability of the large scale structures formed after the transition to overcome with the adverse pressure gradient, move towards the wall and close the bubble. El estudio de capas límites transicionales con separación es de gran relevancia en distintas aplicaciones tecnológicas. Particularmente, en tecnología aeronáutica, aparecen en procesos claves, tales como el flujo alrededor de alas o álabes de turbomaquinaria. El objetivo de esta tesis es el estudio de estos flujos en situaciones representativas de las aplicaciones tecnológicas, ganando por un lado conocimiento sobre la fenomenología y los procesos físicos que aparecen y, por otra parte, desarrollando un modelo sencillo para el escalado de los mismos. Para conseguir este objetivo se han realizado ensayos en una instalación experimental de baja velocidad específicamente diseñada para asegurar un flujo homogéneo y con bajo nivel de perturbaciones, de modo que se evita el disparo de mecanismos transicionales no deseados. La capa límite bajo estudio se ha desarrollado sobre una placa plana, imponiendo un gradiente de presión a la misma por medio de paredes de geometría especificada. éstas generan una región inicial de aceleración seguida de una zona de deceleración. La región inicial se diseña para tener en al inicio de la deceleración un perfil de capa límite de Blasius, caracterizado por su espesor de cantidad de movimiento, y una cierta velocidad externa a la capa límite que se considera la velocidad característica del problema. La región de deceleración está concebida para que la variación de la velocidad externa a la capa límite sea lineal, definiendo de esta forma una longitud característica del problema. Los ensayos se han realizado explotando varias técnicas experimentales, tanto intrusivas (anemometría de hilo caliente, sondas de presión total) como no intrusivas (anemometrías láser y PIV, filmación de alta velocidad), de cara a aprovechar las ventajas de cada una de ellas y permitir validación cruzada de resultados entre las mismas. Caracterizada la capa límite al comienzo de la deceleración, y garantizados los parámetros integrales y niveles de perturbación deseados se procede al estudio de la zona de deceleración. Se presenta en la tesis un análisis de la evolución de la capa límite laminar desde el inicio de la misma hasta el punto de separación, comparando con métodos integrales, simulaciones numéricas, y proponiendo un nuevo modelo para esta evolución. Aguas abajo de la separación, el flujo en las proximidades de la pared se configura como una capa de cortadura que encierra una región de fluido recirculatorio de baja cantidad de movimiento. Se ha caracterizado la región en que dicha capa de cortadura permanece laminar, encontrando que se posiciona de modo que compensa el gradiente adverso de presión asociado a la deceleración de la corriente. En estas condiciones, el espesor de cantidad de movimiento permanece prácticamente constante y esta capa de cortadura laminar se extiende hasta que los fenómenos transicionales aparecen. Estos fenómenos son de tipo no viscoso, similares a los que aparecen en una capa de cortadura libre. El análisis de la región transicional comienza con un estudio de la evolución de las vii viii RESUMEN perturbaciones en la zona de crecimiento lineal de las mismas y la comparación de los resultados experimentales con un modelo numérico y con datos de otros autores. La coalescencia de los resultados tanto para el crecimiento de las perturbaciones como para las frecuencias excitadas queda demostrada. Para los estadios finales de la transición se observa la concentración de la vorticidad en torbellinos, de modo análogo a lo que ocurre en capas de cortadura libres. A diferencia de estas, la presencia de la pared y del gradiente de presión hace que, bajo ciertas condiciones, la gran escala se desplace hacia la pared y desaparezca rápidamente. En este caso el flujo recirculatorio queda confinado en una región cerrada y se habla de cierre de la burbuja o readherencia de la capa límite. A partir del punto de readherencia se tiene una configuración fluida en las proximidades de la pared que tradicionalmente se ha considerado turbulenta. Se ha observado que los métodos integrales existentes para capas límites turbulentas no ajustan bien a las medidas experimentales realizadas, hecho imputable a que no se obtiene en dicha región un flujo turbulento plenamente desarrollado. Se ha encontrado, sin embargo, que pasado el punto de readherencia los perfiles de velocidad próximos a la pared son autosemejantes entre sí y se ha propuesto un modelo para la evolución de los parámetros integrales de la capa límite en esta región. Finalmente, el fenómeno conocido como “estallido” de la burbuja se ha analizado. Se ha comprobado la validez de los modelos existentes en la literatura y se propone uno nuevo. Este fenómeno se achaca a la incapacidad de la gran estructura formada tras la transición para vencer el gradiente adverso de presión, desplazarse hacia la pared y cerrar la burbuja.

Long-term foliar persistence and efficacy of spinosad against beet armyworm under greenhouse conditions.

BACKGROUND: The immediate lethality caused by spinosad has been widely studied on Spodoptera exigua (H ¿ ubner). However, long-term effects can also provide valuable information on insecticide toxic action. Here, the persistence of spinosad on Capsicum annuum L. foliage and the lethal and sublethal effects of greenhouse-aged foliar residues of this insecticide on third instars of S. exigua are reported. RESULTS: Foliage was collected at 0, 3, 5, 10, 20, 30, 40 and 50 days after application, and spinosad residues were measured. Residues decreased over time according to first-order kinetics. The average rate constant and half-life of disappearance were 4.44×10?3 and156 daysand5.80×10?3 and120 days for60and120 mg L?1 respectively. Larval mortalitygradually decreased, corresponding to the residues, but was still appreciable (35 and 65% for 60 and 120 mg L?1 respectively) when the larvae were fed with foliage collected 50 days after treatment. Subsequently, pupal development was reduced and varied between 20 and 60% and between 21 and 41% for 60 and 120 mg L?1, respectively, in all ages of leaf residues that were bioassayed. At all time points, the consumption rate by the larvae was reduced between 62 and 84% for both concentrations that were bioassayed. CONCLUSION: It is concluded that, under the present greenhouse conditions, the degradation of spinosad was slower than that reported by other authors in the field, and, because of that, its residues could cause lethal and sublethal effects to S. exigua larvae.

Influence of Atmospheric Conditions on mmWave CATR Facilities: Formulation and Compensation Scheme

The performance of a CATR relies on the planarity of the synthesized test wave, which is generated within a bounded volume for which specifications are drawn. Millimetre-wave facilities deal with the classical limitations of this frequency band, among which two become critical in our analysis: time-extensive acquisition campaigns and impact of environmental variables. Both features become more evident when increasing the frequency of operation. The variation in atmospheric variables, such as humidity, temperature and pressure has an influence over the performance of all the elements of the facility. The instrumentation behavior is influenced both by the warming up process, and the ambience conditions that surround the equipment. On the changes of the atmosphere itself, they affect the electromagnetic wave propagation, given the physical link between the conditions of the atmosphere and its electric properties as an electromagnetic waves propagation medium

Pressure measurements of the detachment bubble on the Bolund Island

Pressure measurements on the surface of a 1:230 scale model of Bolund Island are presented. The model is smooth and no boundary layer generation has been considered since the experiment is designed as the simplest possible reference case. Measurement have been taken for a range of Reynolds numbers based on the average undisturbed wind speed U? and the maximum height of the island, h [1.7×104 , 8.5×104], and for a range of wind directions. Four minutes time series of pressure in more than 400 points have been acquired and analysed to obtain the spatial distribution of both the time average and the variance of the pressure signal. The horizontal extension of the detachment bubble for the different Reynolds numbers and wind directions is identified by isobars and curves of constant value of pressure variance. The applicability of this technique for evaluating the horizontal topology of high turbulence regions associated to detachment bubbles after escarpments in potential wind farm sites is analysed. The results obtained shows that the behaviour of the mean pressure coefficient, Cp, the std. pressure coefficient, C?p, and the skewness of the pressure, Sp can be used to study the bubble over the island to a certain extent. This experiment is part of the set of different analysis on the Bolund test case that is being undertaken within WAUDIT project by the different scientific groups.

Jupiter power generation with electrodynamic tethers at constant orbital energy

An electrodynamic tether system for power generation at Jupiter is presented that allows extracting energy from Jupiter's corotating plasmasphere while leaving the system orbital energy unaltered to first order. The spacecraft is placed in a polar orbit with the tether spinning in the orbital plane so that the resulting Lorentz force, neglecting Jupiter's magnetic dipole tilt, is orthogonal to the instantaneous velocity vector and orbital radius, hence affecting orbital inclination rather than orbital energy. In addition, the electrodynamic tether subsystem, which consists of two radial tether arms deployed from the main central spacecraft, is designed in such a way as to extract maximum power while keeping the resulting Lorentz torque constantly null. The power-generation performance of the system and the effect on the orbit inclination is evaluated analytically for different orbital conditions and verified numerically. Finally, a thruster-based inclination-compensation maneuver at apoapsis is added, resulting in an efficient scheme to extract energy from the plasmasphere of the planet with minimum propellant consumption and no inclination change. A tradeoff analysis is conducted showing that, depending on tether size and orbit characteristics, the system performance can be considerably higher than conventional power-generation methods.