Effect of conservation tillage on soil physical properties, in-situ rainwater harvesting, and erosion control in arid and semi-arid regions

La escasez del agua en las regiones áridas y semiáridas se debe a la escasez de precipitaciones y la distribución desigual en toda la temporada, lo que hace de la agricultura de secano una empresa precaria. Un enfoque para mejorar y estabilizar el agua disponible para la producción de cultivos en estas regiones es el uso de tecnologías de captación de agua de lluvia in situ y su conservación. La adopción de los sistemas de conservación de la humedad del suelo in situ, tales como la labranza de conservación, es una de las estrategias para mejorar la gestión de la agricultura en zonas áridas y semiáridas. El objetivo general de esta tesis ha sido desarrollar una metodología de aplicación de labranza de depósito e investigar los efectos a corto plazo sobre las propiedades físicas del suelo de las diferentes prácticas de cultivo que incluyen labranza de depósito: (reservoir tillage, RT), la laboreo mínimo: (minimum tillage, MT), la no laboreo: (zero tillage, ZT) y laboreo convencional: (conventional tillage, CT) Así como, la retención de agua del suelo y el control de la erosión del suelo en las zonas áridas y semiáridas. Como una primera aproximación, se ha realizado una revisión profunda del estado de la técnica, después de la cual, se encontró que la labranza de depósito es un sistema eficaz de cosecha del agua de lluvia y conservación del suelo, pero que no ha sido evaluada científicamente tanto como otros sistemas de labranza. Los trabajos experimentales cubrieron tres condiciones diferentes: experimentos en laboratorio, experimentos de campo en una región árida, y experimentos de campo en una región semiárida. Para investigar y cuantificar el almacenamiento de agua a temperatura ambiente y la forma en que podría adaptarse para mejorar la infiltración del agua de lluvia recolectada y reducir la erosión del suelo, se ha desarrollado un simulador de lluvia a escala de laboratorio. Las características de las lluvias, entre ellas la intensidad de las precipitaciones, la uniformidad espacial y tamaño de la gota de lluvia, confirmaron que las condiciones naturales de precipitación son simuladas con suficiente precisión. El simulador fue controlado automáticamente mediante una válvula de solenoide y tres boquillas de presión que se usaron para rociar agua correspondiente a diferentes intensidades de lluvia. Con el fin de evaluar el método de RT bajo diferentes pendientes de superficie, se utilizaron diferentes dispositivos de pala de suelo para sacar un volumen idéntico para hacer depresiones. Estas depresiones se compararon con una superficie de suelo control sin depresión, y los resultados mostraron que la RT fue capaz de reducir la erosión del suelo y la escorrentía superficial y aumentar significativamente la infiltración. Luego, basándonos en estos resultados, y después de identificar la forma adecuada de las depresiones, se ha diseñado una herramienta combinada (sistema integrado de labranza de depósito (RT)) compuesto por un arado de una sola línea de chisel, una sola línea de grada en diente de pico, sembradora modificada, y rodillo de púas. El equipo fue construido y se utiliza para comparación con MT y CT en un ambiente árido en Egipto. El estudio se realizó para evaluar el impacto de diferentes prácticas de labranza y sus parámetros de funcionamiento a diferentes profundidades de labranza y con distintas velocidades de avance sobre las propiedades físicas del suelo, así como, la pérdida de suelo, régimen de humedad, la eficiencia de recolección de agua, y la productividad de trigo de invierno. Los resultados indicaron que la RT aumentó drásticamente la infiltración, produciendo una tasa que era 47.51% más alta que MT y 64.56% mayor que la CT. Además, los resultados mostraron que los valores más bajos de la escorrentía y pérdidas de suelos 4.91 mm y 0.65 t ha-1, respectivamente, se registraron en la RT, mientras que los valores más altos, 11.36 mm y 1.66 t ha-1, respectivamente, se produjeron en el marco del CT. Además, otros dos experimentos de campo se llevaron a cabo en ambiente semiárido en Madrid con la cebada y el maíz como los principales cultivos. También ha sido estudiado el potencial de la tecnología inalámbrica de sensores para monitorizar el potencial de agua del suelo. Para el experimento en el que se cultivaba la cebada en secano, se realizaron dos prácticas de labranza (RT y MT). Los resultados mostraron que el potencial del agua del suelo aumentó de forma constante y fue consistentemente mayor en MT. Además, con independencia de todo el período de observación, RT redujo el potencial hídrico del suelo en un 43.6, 5.7 y 82.3% respectivamente en comparación con el MT a profundidades de suelo (10, 20 y 30 cm, respectivamente). También se observaron diferencias claras en los componentes del rendimiento de los cultivos y de rendimiento entre los dos sistemas de labranza, el rendimiento de grano (hasta 14%) y la producción de biomasa (hasta 8.8%) se incrementaron en RT. En el experimento donde se cultivó el maíz en regadío, se realizaron cuatro prácticas de labranza (RT, MT, ZT y CT). Los resultados revelaron que ZT y RT tenían el potencial de agua y temperatura del suelo más bajas. En comparación con el tratamiento con CT, ZT y RT disminuyó el potencial hídrico del suelo en un 72 y 23%, respectivamente, a la profundidad del suelo de 40 cm, y provocó la disminución de la temperatura del suelo en 1.1 y un 0.8 0C respectivamente, en la profundidad del suelo de 5 cm y, por otro lado, el ZT tenía la densidad aparente del suelo y resistencia a la penetración más altas, la cual retrasó el crecimiento del maíz y disminuyó el rendimiento de grano que fue del 15.4% menor que el tratamiento con CT. RT aumenta el rendimiento de grano de maíz cerca de 12.8% en comparación con la ZT. Por otra parte, no hubo diferencias significativas entre (RT, MT y CT) sobre el rendimiento del maíz. En resumen, según los resultados de estos experimentos, se puede decir que mediante el uso de la labranza de depósito, consistente en realizar depresiones después de la siembra, las superficies internas de estas depresiones se consolidan de tal manera que el agua se mantiene para filtrarse en el suelo y por lo tanto dan tiempo para aportar humedad a la zona de enraizamiento de las plantas durante un período prolongado de tiempo. La labranza del depósito podría ser utilizada como un método alternativo en regiones áridas y semiáridas dado que retiene la humedad in situ, a través de estructuras que reducen la escorrentía y por lo tanto puede resultar en la mejora de rendimiento de los cultivos. ABSTRACT Water shortage in arid and semi-arid regions stems from low rainfall and uneven distribution throughout the season, which makes rainfed agriculture a precarious enterprise. One approach to enhance and stabilize the water available for crop production in these regions is to use in-situ rainwater harvesting and conservation technologies. Adoption of in-situ soil moisture conservation systems, such as conservation tillage, is one of the strategies for upgrading agriculture management in arid and semi-arid environments. The general aim of this thesis is to develop a methodology to apply reservoir tillage to investigate the short-term effects of different tillage practices including reservoir tillage (RT), minimum tillage (MT), zero tillage (ZT), and conventional tillage (CT) on soil physical properties, as well as, soil water retention, and soil erosion control in arid and semi-arid areas. As a first approach, a review of the state of the art has been done. We found that reservoir tillage is an effective system of harvesting rainwater and conserving soil, but it has not been scientifically evaluated like other tillage systems. Experimental works covered three different conditions: laboratory experiments, field experiments in an arid region, and field experiments in a semi-arid region. To investigate and quantify water storage from RT and how it could be adapted to improve infiltration of harvested rainwater and reduce soil erosion, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to different rainfall intensities. In order to assess the RT method under different surface slopes, different soil scooping devices with identical volume were used to create depressions. The performance of the soil with these depressions was compared to a control soil surface (with no depression). Results show that RT was able to reduce soil erosion and surface runoff and significantly increase infiltration. Then, based on these results and after selecting the proper shape of depressions, a combination implement integrated reservoir tillage system (integrated RT) comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and used to compared to MT and CT in an arid environment in Egypt. The field experiments were conducted to evaluate the impact of different tillage practices and their operating parameters at different tillage depths and different forward speeds on the soil physical properties, as well as on runoff, soil losses, moisture regime, water harvesting efficiency, and winter wheat productivity. Results indicated that the integrated RT drastically increased infiltration, producing a rate that was 47.51% higher than MT and 64.56% higher than CT. In addition, results showed that the lowest values of runoff and soil losses, 4.91 mm and 0.65 t ha-1 respectively, were recorded under the integrated RT, while the highest values, 11.36 mm and 1.66 t ha -1 respectively, occurred under the CT. In addition, two field experiments were carried out in semi-arid environment in Madrid with barley and maize as the main crops. For the rainfed barley experiment, two tillage practices (RT, and MT) were performed. Results showed that soil water potential increased quite steadily and were consistently greater in MT and, irrespective of the entire observation period, RT decreased soil water potential by 43.6, 5.7, and 82.3% compared to MT at soil depths (10, 20, and 30 cm, respectively). In addition, clear differences in crop yield and yield components were observed between the two tillage systems, grain yield (up to 14%) and biomass yield (up to 8.8%) were increased by RT. For the irrigated maize experiment, four tillage practices (RT, MT, ZT, and CT) were performed. Results showed that ZT and RT had the lowest soil water potential and soil temperature. Compared to CT treatment, ZT and RT decreased soil water potential by 72 and 23% respectively, at soil depth of 40 cm, and decreased soil temperature by 1.1 and 0.8 0C respectively, at soil depth of 5 cm. Also, ZT had the highest soil bulk density and penetration resistance, which delayed the maize growth and decreased the grain yield that was 15.4% lower than CT treatment. RT increased maize grain yield about 12.8% compared to ZT. On the other hand, no significant differences among (RT, MT, and CT) on maize yield were found. In summary, according to the results from these experiments using reservoir tillage to make depressions after seeding, these depression’s internal surfaces are consolidated in such a way that the water is held to percolate into the soil and thus allowing time to offer moisture to the plant rooting zone over an extended period of time. Reservoir tillage could be used as an alternative method in arid and semi-arid regions and it retains moisture in-situ, through structures that reduce runoff and thus can result in improved crop yields.

Influence of denitrifiers abundance on N2O emissions in long term tillage system under a rainfed legume crop

Current studies about nitrous oxide (N2O) emissions from legume crops have raised considerable doubt, observing a high variability between sites (0.03-7.09 kg N2O–N ha−1 y -1) [1]. This high variability has been associated to climate and soil conditions, legume species and soil management practices (e.g. conservation or conventional tillage). Conservation tillage (i.e. no tillage (NT) and minimum tillage (MT)) has spread during the last decades because promotes several positive effects (increase of soil organic content, reduction of soil erosion and enhancement of carbon (C) sequestration). However, these benefits could be partly counterbalanced by negative effects on the release of N2O emissions. Among processes responsible for N2O production and consumption in soils, denitrification plays an importantrole both in tilled and no-tilled ropping systems [2]. Recently, amplification of functional bacterial genes involved in denitrification is being used to examine denitrifiers abundance and evaluate their influence on N2O emissions. NirK and nirS are functional genes encoding the cytochrome cd1 and copper nitrite reductase, which is the key enzyme regulating the denitrification process.

Short-term effects of four tillage practices on soil physical properties, soil water potential, and maize yield

The area cultivated using conservation tillage has recently increased in central Spain. However, soil compaction and water retention with conservation tillage still remains a genuine concern for landowners in this region be- cause of its potential effect on the crop growth and yield. The aim of this research is to determine the short- term influences of four tillage treatments on soil physical properties. In the experiment, bulk density, cone index, soil water potential, soil temperature and maize (Zea mays L.) productivity have been measured. A field experiment was established in spring of 2013 on a loamy soil. The experiment compared four tillage methods (zero tillage, ZT; reservoir tillage, RT; minimum tillage, MT; and conventional tillage, CT). Soil bulk density and soil cone index were measured during maize growing season and at harvesting time. Furthermore, the soil water potential was monitored by using a wireless sensors network with sensors at 20 and 40 cm depths. Also, soil temperatures were registered at depths of 5 and 12 cm. Results indicated that there were significant differ- ences between soil bulk density and cone index of ZT method and those of RT, MT, and CT, during the growing season; although, this difference was not significant at the time of harvesting in some soil layers. Overall, in most soil layers, tillage practice affected bulk density and cone index in the order: ZT N RT N MT N CT. Regardless oftheentireobservationperiod,results exhibited that soils under ZT and RT treatments usually resulted in higher water potential and lower soil temperature than the other two treatments at both soil depths. In addition, clear differences in maize grain yield were observed between ZT and CT treatments, with a grain yield (up to 15.4%) increase with the CT treatment. On the other hand, no significant differences among (RT, MT, and CT) on maizeyieldwerefound.Inconclusion,the impact of soil compaction increase and soil temperature decrease,pro- duced by ZT treatment is a potential reason for maize yield reduction in this tillage method. We found that RT could be certainly a viable option for farmers incentral Spain,particularly when switching to conservation tillage from conventional tillage. This technique showed a moderate and positive effect on soil physical properties and increased maize yields compared to ZT and MT, and provides an opportunity to stabilize maize yields compared to CT.

Crop rotation and residues influence N2O emission and N efficiency rather than tillage under a rainfed Mediterranean agroecosystem

Conservation tillage and crop rotation have spread during the last decades because promotes several positive effects (increase of soil organic content, reduction of soil erosion, and enhancement of carbon sequestration) (Six et al., 2004). However, these benefits could be partly counterbalanced by negative effects on the release of nitrous oxide (N2O) (Linn and Doran, 1984). There is a lack of data on long-term tillage system study, particularly in Mediterranean agro-ecosystems. The aim of this study was to evaluate the effects of long-term (>17 year) tillage systems (no tillage (NT), minimum tillage (MT) and conventional tillage (CT)); and crop rotation (wheat (W)-vetch (V)-barley (B)) versus wheat monoculture (M) on N2O emissions. Additionally, Yield-scaled N2O emissions (YSNE) and N uptake efficiency (NUpE) were assessed for each treatment.

Soil P and cation availability and crop uptake in a forage rotation under conventional and reduced tillage

Long-term conservation tillage can modify vertical distribution of nutrients in soil profiles and alter nutrient availability and yields of crops.

Availability and uptake of trace elements in a forage rotation under conservation and plough tillage

After 14 years under conventional plough tillage (CT) or conservation minimum tillage (MT), the soil available Al, Fe, Mn, Cu and Zn (0-5, 5-15 and 15-30 cm layers) and their plant uptake were evaluated during two years in a ryegrass-maize forage rotation in NW Spain (t emperate-humid region). The three-way ANOVA showed that trace element concentrations in soil were mainly influenced by sampling date, followed by soil depth and tillage system (35-73 %, 7-58 % and 3- 11 % of variance explained, respectively). Excepting for Fe (CT) and Al (CT and MT), the elemental concentrations decreased with depth, the stratification being stronger under MT. For soil available Al, Fe, Mn and Cu, the concentrations were higher in CT than in MT (5-15 and 15-30 cm layers) or were not affected by tillage system (0-5 cm). In contrast, the available Zn contents were higher in MT than CT at the soil surface and did not differ in deeper layers. The concentration of Al, Fe and Cu in crops were not influenced by tillage system, which explain 22 % of Mn variance in maize (CT > MT in the more humid year) and 18 % of Zn variance in ryegrass (MT > CT in both years). However, in the summer crop (maize) the concentrations of Fe, Mn and Zn tended to be higher in MT than in CT under drought conditions, while the opposite was true in the year without water limitation. Therefore, under the studied conditions of climate, soil, tillage and crop rotation, little influence of tillage system on crop nutritive value would be expected. To minimize the potential deficiency of Zn (maize) and Cu (maize and ryegrass) on crop yields the inclusion of these micro-nutrients in fertilization schedule is reco mmended, as well as liming to alleviate Al toxicity on maize crops.

Habitat management for conservation of pollinators in agro-ecosystems of Central Spain

La gestión de hábitat orientada a la conservación de polinizadores en los agro-ecosistemas requiere una selección de especies vegetales atendiendo fundamentalmente a dos criterios: i) el potencial atractivo de sus flores a los polinizadores; y ii) la simplicidad en su manejo agronómico. Además de estas premisas, es necesario considerar la capacidad invasora de estas especies vegetales, debido a que algunas de las más atractivas pueden resultar invasoras en determinados agro-ecosistemas. Por lo tanto, es preciso determinar qué especies vegetales son las más indicadas para ser implementadas en cada agro-ecosistema. En la presente tesis doctoral se plantea la búsqueda de las especies vegetales adecuadas para atraer polinizadores en los agro-ecosistemas del centro de España. En una primera aproximación, se ha evaluado la atracción y expansión espacial (potencial invasivo) de seis plantas perennes de la familia Lamiaceae (aromáticas), elegidas por ser nativas de la región mediterránea. La elección de las especies vegetales se ha llevado a cabo con el fin de crear márgenes funcionales basados en la mezcla de especies vegetales con distintos periodos de floración, de modo que prolonguen la disponibilidad de recursos florales en el tiempo. Tras un primer año dedicado al establecimiento de las especies aromáticas, en los dos años siguientes se ha estudiado la atracción individual y combinada de las especies vegetales sobre los polinizadores, y como ésta se ve afectada por la densidad y la morfología floral, utilizando para ello un diseño experimental en bloques al azar. Los resultados de este estudio han puesto de manifiesto que la morfología floral no tuvo influencia sobre la atracción de las especies vegetales, pero si la densidad floral, puesto que las especies vegetales con mayor densidad de flores (Nepeta tuberosa e Hyssopus officinalis) han mostrado mayor atracción a polinizadores. Cabe destacar que de las seis especies consideradas, dos especies de verano (Melissa officinalis y Thymbra capitata) no han contribuido de forma efectiva a la atracción de la mezcla hacia los polinizadores, mostrando una reducción significativa de este parámetro respecto a las otras especies aromáticas a lo largo del verano. Se ha observado que ninguna de las especies aromáticas evaluadas ha mostrado tendencia invasora a lo largo del estudio. En base a estos resultados, se puede concluir que entre las especies aromáticas estudiadas, N. tuberosa, H. officinalis y Salvia verbenaca son las que ofrecen mayor potencial para ser utilizadas en la conservación de polinizadores. De forma similar al caso de las plantas aromáticas, se ha llevado a cabo una segunda experimentación que incluía doce plantas anuales con floración de primavera, en la que se evaluó la atracción a polinizadores y su comportamiento agronómico. Este estudio con especies herbáceas se ha prolongado durante dos años, utilizando un diseño experimental de bloques aleatorios. Las variables analizadas fueron: el atractivo de las distintas especies vegetales a los polinizadores, su eficiencia de atracción (calculada como una combinación de la duración de la floración y las visitas de insectos), su respuesta a dos tipos de manejo agronómico (cultivo en mezcla frente a monocultivo; laboreo frente a no-laboreo) y su potencial invasivo. Los resultados de esta segunda experimentación han mostrado que las flores de Borago officinalis, Echium plantagineum, Phacelia tanacetifolia y Diplotaxis tenuifolia son atractivas a las abejas, mientras que las flores de Calendula arvensis, Coriandrum sativum, D. tenuifolia y Lobularia maritima son atractivas a los sírfidos. Con independencia del tipo de polinizadores atraídos por cada especie vegetal, se ha observado una mayor eficiencia de atracción en parcelas con monocultivo de D. tenuifolia respecto a las parcelas donde se cultivó una mezcla de especies herbáceas, si bien en estas últimas se observó mayor eficiencia de atracción que en la mayoría de parcelas mono-específicas. Respecto al potencial invasivo de las especies herbáceas, a pesar de que algunas de las más atractivas a polinizadores (P. tanacetifolia and C. arvensis) mostraron tendencia a un comportamiento invasor, su capacidad de auto-reproducción se vio reducida con el laboreo. En resumen, D. tenuifolia es la única especie que presentó una alta eficiencia de atracción a distintos tipos de polinizadores, conjuntamente con una alta capacidad de auto-reproducción pero sin mostrar carácter invasor. Comparando el atractivo de las especies vegetales utilizadas en este estudio sobre los polinizadores, D. tenuifolia es la especie más recomendable para su cultivo orientado a la atracción de polinizadores en agro-ecosistemas en el centro de España. Esta especie herbácea, conocida como rúcula, tiene la ventaja añadida de ser una especie comercializada para el consumo humano. Además de su atractivo a polinizadores, deben considerarse otros aspectos relacionados con la fisiología y el comportamiento de esta especie vegetal en los agro-ecosistemas antes de recomendar su cultivo. Dado que el cultivo en un campo agrícola de una nueva especie vegetal implica unos costes de producción, por ejemplo debidos a la utilización de agua de riego, es necesario evaluar el incremento en dichos costes en función de demanda hídrica específica de esa especie vegetal. Esta variable es especialmente importante en zonas dónde se presentan sequías recurrentes como es el caso del centro y sur-este de la península Ibérica. Este razonamiento ha motivado un estudio sobre los efectos del estrés hídrico por sequía y el estrés por déficit moderado y severo de riego sobre el crecimiento y floración de la especie D. tenuifolia, así como sobre la atracción a polinizadores. Los resultados muestran que tanto el crecimiento y floración de D. tenuifolia como su atracción a polinizadores no se ven afectados si la falta de riego se produce durante un máximo de 4 días. Sin embargo, si la falta de riego se extiende a lo largo de 8 días o más, se observa una reducción significativa en el crecimiento vegetativo, el número de flores abiertas, el área total y el diámetro de dichas flores, así como en el diámetro y longitud del tubo de la corola. Por otro lado, el estudio pone de manifiesto que un déficit hídrico regulado permite una gestión eficiente del agua, la cual, dependiendo del objetivo final del cultivo de D. tenuifolia (para consumo o solo para atracción de polinizadores), puede reducir su consumo entre un 40 y un 70% sin afectar al crecimiento vegetativo y desarrollo floral, y sin reducir significativamente el atractivo a los polinizadores. Finalmente, esta tesis aborda un estudio para determinar cómo afecta el manejo de hábitat a la producción de los cultivos. En concreto, se ha planteado una experimentación que incluye márgenes mono-específicos y márgenes con una mezcla de especies atractivas a polinizadores, con el fin de determinar su efecto sobre la producción del cultivo de cilantro (C. sativum). La elección del cultivo de cilantro se debe a que requiere la polinización de insectos para su reproducción (aunque, en menor medida, puede polinizarse también por el viento), además de la facilidad para estimar su producción en condiciones semi-controladas de campo. El diseño experimental consistía en la siembra de márgenes mono-específicos de D. tenuifolia y márgenes con mezcla de seis especies anuales situados junto al cultivo de cilantro. Estos cultivos con márgenes florales fueron comparados con controles sin margen floral. Además, un segundo grupo de plantas de cilantro situadas junto a todos los tratamientos, cuyas flores fueron cubiertas para evitar su polinización, sirvió como control para evaluar la influencia de los polinizadores en la producción del cultivo. Los resultados muestran que la presencia de cualquiera de los dos tipos de margen floral mejora el peso y el porcentaje de germinación de las semillas de cilantro frente al control sin margen. Si se comparan los dos tipos de margen, se ha observado un mayor número de semillas de cilantro junto al margen con mezcla de especies florales respecto al margen mono-específico, probablemente debido al mayor número visitas de polinizadores. Puesto que el experimento se realizó en condiciones de campo semi-controladas, esto sugiere que las visitas de polinizadores fueron el factor determinante en los resultados. Por otro lado, los resultados apuntan a que la presencia de un margen floral (ya sea mono-especifico o de mezcla) en cultivos de pequeña escala puede aumentar la producción de cilantro en más de un 200%, al tiempo que contribuyen a la conservación de los polinizadores. ABSTRACT Habitat management, aimed to conserve pollinators in agro-ecosystems, requires selection of the most suitable plant species in terms of their attractiveness to pollinators and simplicity of agronomic management. However, since all flowers are not equally attractive to pollinators and many plant species can be weedy or invasive in the particular habitat, it is important to test which plant species are the most appropriate to be implemented in specific agro-ecosystems. For that reason, this PhD dissertation has been focused on determination of the most appropriate aromatic and herbaceous plants for conservation of pollinators in agro-ecosystems of Central Spain. Therefore, in a first approximation, spatial expansion (i.e. potential weediness) and attractiveness to pollinators of six aromatic perennial plants from the Lamiaceae family, native and frequent in the Mediterranean region, were evaluated. Preliminary plant selection was based on designing a functional mixed margins consisting of plants attractive to pollinators and with different blooming periods, in order to extend the availability of floral resources in the field. After a year of vegetative growth, the next two years the plant species were studied in a randomized block design experiment in order to estimate their attractiveness to pollinators in Central Spain and to investigate whether floral morphology and density affect attractiveness to pollinators. The final aim of the study was to evaluate how their phenology and attractiveness to pollinators can affect the functionality of a flowering mixture of these plants. In addition, the spatial expansion, i.e. potential weediness, of the selected plant species was estimated under field conditions, as the final purpose of the studied plants is to be implemented within agro-ecosystems. The results of the experiment showed that floral morphology did not affect the attractiveness of plants to pollinators, but floral density did, as plant species with higher floral density (i.e. Nepeta tuberosa and Hyssopus officinalis) showed significantly higher attractiveness to pollinators. In addition, of six plant species, two summer species (Melissa officinalis and Thymbra capitata) did not efficiently contribute to the attractiveness of the mixture to pollinators, which reduced its attractiveness during the summer period. Finally, as none of the plants showed weedy behaviour under field conditions, the attractive plant species, i.e. N. tuberosa, H. officinalis and the early spring flowering Salvia verbenaca, showed good potential to conserve the pollinators. Similarly, in a second approximation, the attractiveness to pollinators and agronomic behaviour of twelve herbaceous plants blooming in spring were studied. This experiment was conducted over two years in a randomized block design in order to evaluate attractiveness of preselected plant species to pollinators, as well as their attractiveness efficiency (a combination of duration of flowering and insect visitation), their response to two different agronomic management practices (growing in mixed vs. mono-specific plots; tillage vs. no-tillage), and their potential weediness. The results of this experiment showed that the flowers of Borago officinalis, Echium plantagineum, Phacelia tanacetifolia and Diplotaxis tenuifolia were attractive to bees, while Calendula arvensis, Coriandrum sativum, D. tenuifolia and Lobularia maritima were attractive to hoverflies. In addition, floral mixture resulted in lower attractiveness efficiency to pollinators than mono-specific D. tenuifolia, but higher than most of the mono-specific stands. On the other hand, although some of the most attractive plant species (e.g. P. tanacetifolia and C. arvensis) showed potential weediness, their self-seeding was reduced by tillage. After comparing attractiveness efficiency of various herbaceous species to pollinators and their potential weediness, the results indicated that D. tenuifolia showed the highest attractiveness efficiency to pollinators and efficient self-reproduction, making it highly recommended to attract bees and hoverflies in agro-ecosystems of Central Spain. In addition, this plant, commonly known as wild rocket, has a supplementary economic value as a commercialized crop. The implementation of a new floral margin in agro-ecosystems means increased production costs, especially in regions with frequent and long droughts (as it is Central and South-East area of Iberian Peninsula), where the principal agricultural cost is irrigation. Therefore, before recommending D. tenuifolia for sustainable habitat management within agro-ecosystems, it is necessary to study the effect of drought stress and moderate and severe deficit irrigation on its growth, flower development and attractiveness to pollinators. The results of this experiment showed that in greenhouse conditions, potted D. tenuifolia could be without irrigation for 4 days without affecting its growth, flowering and attractiveness to pollinators. However, lack of irrigation for 8 days or longer significantly reduced the vegetative growth, number of open flowers, total floral area, flower diameter, corolla tube diameter and corolla tube length of D. tenuifolia. This study showed that regulated deficit irrigation can improve water use efficiency, and depending on the purpose of growing D. tenuifolia, as a crop or as a beneficial plant to attract pollinators, it can reduce water consumption by 40% to 70% without affecting its vegetative and floral development and without reducing its attractiveness to pollinators. Finally, the following experiment was developed in order to understand how habitat management can influence on the agricultural production. For this purpose, it was evaluated if the vicinity of mixed and mono-specific field margins, preselected to conserve pollinators within agro-ecosystems, can improve seed production in coriander (C. sativum). The selection of this plant species for the experiment was based on its necessity for insect pollination for production of seeds (even though some pollen can be transmitted from one flower to another by wind) and the fact that under semi-controlled field conditions established in the field it is possible to estimate its total seed production. Since D. tenuifolia is attractive for both bees and hoverflies in Central Spain, the main objective of this experiment was to estimate the impact of two different types of field margins, i.e. mono-specific margin with D. tenuifolia and mixed margin with six herbaceous species, on the seed production of potted coriander. For that reason, it was tested: i) if open pollination (control without proximate field margin and treatments with nearby mono-specific and mixed margin) increases the seed production of coriander when compared with no-pollination (covered inflorescences of coriander) under field conditions; ii) if frequency of pollinator visitation to the flowers of coriander was higher in the presence of field margins than in the control without field margin; and iii) if seed production was higher in the presence of field margins than in control plants of coriander without field margin. The results showed that the proximity of both types of floral margins (mixed and mono-specific) improved the seed quality of coriander plants, as seed weight and germination rate were higher than in control plants without field margin. Furthermore, the number of seeds produced was significantly higher in coriander plants grown near mixed margins than near mono-specific margin, probably due to an increase in pollinator visits. Since the experiment was conducted under semi-controlled field conditions, it can be concluded that pollinator visits was the main factor that biased the results, and that presence of both mixed or mono-specific (D. tenuifolia) margins can improve the production of coriander for more than 200% in small-scale gardens and, in addition, conserve the local pollinators.

Effect of integrated reservoir tillage for in-situ rainwater harvesting and other tillage practices on soil physical properties

There is a need for in-situ soil moisture conservation in arid and semi-arid regions due to insufficient rainfall for agriculture. For this purpose, a combination implement [integrated reservoir tillage system (RT)] comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and compared to the popular tillage practices, viz., minimum tillage (MT) and conventional tillage (CT) in an arid Mediterranean environment in Egypt. The different tillage practices were conducted at tillage depths of 15, 20, and 25 cm and forward speeds of 0.69, 1, 1.25, and 1.53 m s-1. Some soil physical properties, runoff, soil loss, water harvesting efficiency and yield of wheat were evaluated. The different tillage practices caused significant differences in soil physical properties as the RT increased soil infiltration, producing a rate of 48% and 65% higher than that obtained in MT and CT, respectively. The lowest values of runoff and soil loss were recorded under RT as 4.91 mm and 0.65 t ha-1, whereas the highest values were recorded under CT as 11.36 mm and 1.66 t ha-1, respectively. In conclusion, the RT enhanced the infiltration rate, increased water harvesting efficiency, reduced runoff and achieved the highest yield of wheat. The best tillage operating parameters appeared to be at a tillage depth of 20 cm and speed between 1.00 and 1.25 m s-1.

Influence of Tillage and Liming on N2O emission from a rainfed crop

Nitrous oxide (N2O) is the main greenhouse gas (GHG) produced by agricultural soils due to microbial processes. The application of N fertilizers is associated with an increase of N2O losses. However, it is possible to mitigate these emissions by the introduction of adequate management practices (Snyder et al., 2009). Soil conservation practices (i.e.no tillage, NT) have recently become widespread because they promote several positive effects (increases in soil organic carbonand soil fertility, reduction of soil erosion, etc). In terms of GHG emissions, there is no consensus in the literature on the effects of tillage on N2O. Several studies found that NT can produce greater (Baggs et al., 2003), lower (Malhi et al., 2006) or similar (Grandey et al., 2006) N2O emissions compared to traditional tillage (TT). This large uncertainty is associated with the duration of tillage practices and climatic variability. Liming is widely use to solve problems of soil acidity (Al toxicity, yield penalties, etc). Several studies show a decrease in N2O emissions with liming (Barton et al., 2013) whereas no significant effects or increases were observed in others (Galbally et al., 2010). The aim of this work was to evaluate the effects of tillage (NT vs TT) and liming application or not of Ca-amendment) on N2O emissions from an acid soil during a rainfed crop.