Task-based telemanipulation for maintenance in large scientific facilities

This thesis presents a task-oriented approach to telemanipulation for maintenance in large scientific facilities, with specific focus on the particle accelerator facilities at European Organization for Nuclear Research (CERN) in Geneva, Switzerland and GSI Helmholtz Centre for Heavy Ion Research (GSI) in Darmstadt, Germany. It examines how telemanipulation can be used in these facilities and reviews how this differs from the representation of telemanipulation tasks within the literature. It provides methods to assess and compare telemanipulation procedures as well a test suite to compare telemanipulators themselves from a dexterity perspective. It presents a formalisation of telemanipulation procedures into a hierarchical model which can be then used as a basis to aid maintenance engineers in assessing tasks for telemanipulation, and as the basis for future research. The model introduces a new concept of Elemental Actions as the building block of telemanipulation movements and incorporates the dependent factors for procedures at a higher level of abstraction. In order to gain insight into realistic tasks performed by telemanipulation systems within both industrial and research environments a survey of teleoperation experts is presented. Analysis of the responses is performed from which it is concluded that there is a need within the robotics community for physical benchmarking tests which are geared towards evaluating the dexterity of telemanipulators for comparison of their dexterous abilities. A three stage test suite is presented which is designed to allow maintenance engineers to assess different telemanipulators for their dexterity. This incorporates general characteristics of the system, a method to compare kinematic reachability of multiple telemanipulators and physical test setups to assess dexterity from a both a qualitative perspective and measurably by using performance metrics. Finally, experimental results are provided for the application of the proposed test suite onto two telemanipulation systems, one from a research setting and the other within CERN. It describes the procedure performed and discusses comparisons between the two systems, as well as providing input from the expert operator of the CERN system.

Heart Failure Monitoring System Based on Wearable and Information Technologies

In Europe, Cardiovascular Diseases (CVD) are the leading source of death, causing 45% of all deceases. Besides, Heart Failure, the paradigm of CVD, mainly affects people older than 65. In the current aging society, the European MyHeart Project was created, whose mission is to empower citizens to fight CVD by leading a preventive lifestyle and being able to be diagnosed at an early stage. This paper presents the development of a Heart Failure Management System, based on daily monitoring of Vital Body Signals, with wearable and mobile technologies, for the continuous assessment of this chronic disease. The System makes use of the latest technologies for monitoring heart condition, both with wearable garments (e.g. for measuring ECG and Respiration); and portable devices (such as Weight Scale and Blood Pressure Cuff) both with Bluetooth capabilities

An iPhone-based application for promoting type 2 diabetic patients self- management towards healthy lifestyle habits

— In 2000, according to the World Health Organization, at least 171 million people, 2.8% of the population worldwide, suffered from diabetes. The Centres for Disease Control has defined it as an epidemic disease. Its incidence is increasing rapidly, and it is estimated that by 2030 this number will almost double. Diabetes mellitus occurs throughout the world, but is more common (especially type 2) in the more developed countries. Diabetes is a chronic condition that occurs when pancreas does not assure enough insulin secretion or when the body does not consume the insulin produced. Insulin is a hormone that regulates blood sugar. The effect of uncontrolled diabetes is the hyperglycaemia (blood sugar), which eventually seriously damage many organs and systems, especially the nerves and blood vessels. Diabetes type 2 (most common type of diabetes) is highly correlated with elderly people, obesity or overweight. Promoting a healthy lifestyle helps patients to improve their quality of life and in many cases to avoid complications related to the disease. This paper is intended to describe an iPhone-based application for self-management of type 2 diabetic patients, which allow them improving their lifestyle through healthy diet, physical activity and education

Estudio de la tolerancia al daño de los materiales y sistemas de pretensado

La mayoría de las estructuras de hormigón pretensadas construidas en los últimos 50 años han demostrado una excelente durabilidad cuando su construcción se realiza atendiendo las recomendaciones de un buen diseño así como una buena ejecución y puesta en obra de la estructura. Este hecho se debe en gran parte al temor que despierta el fenómeno de la corrosión bajo tensión típico de las armaduras de acero de alta resistencia. Menos atención se ha prestado a la susceptibilidad a la corrosión bajo tensión de los anclajes de postensado, posiblemente debido a que se han reportado pocos casos de fallos catastróficos. El concepto de Tolerancia al Daño y la Mecánica de la Fractura en estructuras de Ingeniería Civil ha empezado a incorporarse recientemente en algunas normas de diseño y cálculo de estructuras metálicas, sin embargo, aún está lejos de ser asimilado y empleado habitualmente por los ingenieros en sus cálculos cuando la ocasión lo requiere. Este desconocimiento de los aspectos relacionados con la Tolerancia al Daño genera importantes gastos de mantenimiento y reparación. En este trabajo se ha estudiado la aplicabilidad de los conceptos de la Mecánica de la Fractura a los componentes de los sistemas de postensado empleados en ingeniería civil, empleándolo para analizar la susceptibilidad de las armaduras activas frente a la corrosión bajo tensiones y a la pérdida de capacidad portante de las cabezas de anclajes de postensado debido a la presencia de defectos. Con este objeto se han combinado tanto técnicas experimentales como numéricas. Los defectos superficiales en los alambres de pretensado no se presentan de manera aislada si no que existe una cierta continuidad en la dirección axial así como un elevado número de defectos. Por este motivo se ha optado por un enfoque estadístico, que es más apropiado que el determinístico. El empleo de modelos estadísticos basados en la teoría de valores extremos ha permitido caracterizar el estado superficial en alambres de 5,2 mm de diámetro. Por otro lado la susceptibilidad del alambre frente a la corrosión bajo tensión ha sido evaluada mediante la realización de una campaña de ensayos de acuerdo con la actual normativa que ha permitido caracterizar estadísticamente su comportamiento. A la vista de los resultados ha sido posible evaluar como los parámetros que definen el estado superficial del alambre pueden determinar la durabilidad de la armadura atendiendo a su resistencia frente a la corrosión bajo tensión, evaluada mediante los ensayos que especifica la normativa. En el caso de las cabezas de anclaje de tendones de pretensado, los defectos se presentan de manera aislada y tienen su origen en marcas, arañazos o picaduras de corrosión que pueden producirse durante el proceso de fabricación, transporte, manipulación o puesta en obra. Dada la naturaleza de los defectos, el enfoque determinístico es más apropiado que el estadístico. La evaluación de la importancia de un defecto en un elemento estructural requiere la estimación de la solicitación local que genera el defecto, que permite conocer si el defecto es crítico o si puede llegar a serlo, si es que progresa con el tiempo (por fatiga, corrosión, una combinación de ambas, etc.). En este trabajo los defectos han sido idealizados como grietas, de manera que el análisis quedara del lado de la seguridad. La evaluación de la solicitación local del defecto ha sido calculada mediante el empleo de modelos de elementos finitos de la cabeza de anclaje que simulan las condiciones de trabajo reales de la cabeza de anclaje durante su vida útil. A partir de estos modelos numéricos se ha analizado la influencia en la carga de rotura del anclaje de diversos factores como la geometría del anclaje, las condiciones del apoyo, el material del anclaje, el tamaño del defecto su forma y su posición. Los resultados del análisis numérico han sido contrastados satisfactoriamente mediante la realización de una campaña experimental de modelos a escala de cabezas de anclaje de Polimetil-metacrilato en los que artificialmente se han introducido defectos de diversos tamaños y en distintas posiciones. ABSTRACT Most of the prestressed concrete structures built in the last 50 years have demonstrated an excellent durability when they are constructed in accordance with the rules of good design, detailing and execution. This is particularly true with respect to the feared stress corrosion cracking, which is typical of high strength prestressing steel wires. Less attention, however, has been paid to the stress corrosion cracking susceptibility of anchorages for steel tendons for prestressing concrete, probably due to the low number of reported failure cases. Damage tolerance and fracture mechanics concepts in civil engineering structures have recently started to be incorporated in some design and calculation rules for metallic structures, however it is still far from being assimilated and used by civil engineers in their calculations on a regular basis. This limited knowledge of the damage tolerance basis could lead to significant repair and maintenance costs. This work deals with the applicability of fracture mechanics and damage tolerance concepts to the components of prestressed systems, which are used in civil engineering. Such concepts have been applied to assess the susceptibility of the prestressing steel wires to stress corrosion cracking and the reduction of load bearing capability of anchorage devices due to the presence of defects. For this purpose a combination of experimental work and numerical techniques have been performed. Surface defects in prestressing steel wires are not shown alone, though a certain degree of continuity in the axial direction exist. A significant number of such defects is also observed. Hence a statistical approach was used, which is assumed to be more appropriate than the deterministic approach. The use of statistical methods based in extreme value theories has allowed the characterising of the surface condition of 5.2 mm-diameter wires. On the other hand the stress corrosion cracking susceptibility of the wire has been assessed by means of an experimental testing program in line with the current regulations, which has allowed statistical characterisasion of their performances against stress corrosion cracking. In the light of the test results, it has been possible to evaluate how the surface condition parameters could determine the durability of the active metal armour regarding to its resistance against stress corrosion cracking assessed by means of the current testing regulations. In the case of anchorage devices for steel tendons for prestressing concrete, the damage is presented as point defects originating from dents, scratches or corrosion pits that could be produced during the manufacturing proccess, transport, handling, assembly or use. Due to the nature of these defects, in this case the deterministic approach is more appropriate than the statistical approach. The assessment of the relevancy of defect in a structural component requires the computation of the stress intensity factors, which in turn allow the evaluation of whether the size defect is critical or could become critical with the progress of time (due to fatigue, corrosion or a combination of both effects). In this work the damage is idealised as tiny cracks, a conservative hypothesis. The stress intensity factors have been calculated by means of finite element models of the anchorage representing the real working conditions during its service life. These numeric models were used to assess the impact of some factors on the rupture load of the anchorage, such the anchorage geometry, material, support conditions, defect size, shape and its location. The results from the numerical analysis have been succesfully correlated against the results of the experimental testing program of scaled models of the anchorages in poly-methil methacrylate in which artificial damage in several sizes and locations were introduced.

A flexible (C)LP-based approach to the analysis of object-oriented programs

Static analyses of object-oriented programs usually rely on intermediate representations that respect the original semantics while having a more uniform and basic syntax. Most of the work involving object-oriented languages and abstract interpretation usually omits the description of that language or just refers to the Control Flow Graph(CFG) it represents. However, this lack of formalization on one hand results in an absence of assurances regarding the correctness of the transformation and on the other it typically strongly couples the analysis to the source language. In this work we present a framework for analysis of object-oriented languages in which in a first phase we transform the input program into a representation based on Horn clauses. This allows on one hand proving the transformation correct attending to a simple condition and on the other being able to apply an existing analyzer for (constraint) logic programming to automatically derive a safe approximation of the semantics of the original program. The approach is flexible in the sense that the first phase decouples the analyzer from most languagedependent features, and correct because the set of Horn clauses returned by the transformation phase safely approximates the standard semantics of the input program. The resulting analysis is also reasonably scalable due to the use of mature, modular (C)LP-based analyzers. The overall approach allows us to report results for medium-sized programs.

A program transformation for continuation call-based tabled execution

The advantages of tabled evaluation regarding program termination and reduction of complexity are well known —as are the significant implementation, portability, and maintenance efforts that some proposals (especially those based on suspensión) require. This implementation effort is reduced by program transformation-based continuation cali techniques, at some eñrciency cost. However, the traditional formulation of this proposal by Ramesh and Cheng limits the interleaving of tabled and non-tabled predicates and thus cannot be used as-is for arbitrary programs. In this paper we present a complete translation for the continuation cali technique which, using the runtime support needed for the traditional proposal, solves these problems and makes it possible to execute arbitrary tabled programs. We present performance results which show that CCall offers a useful tradeoff that can be competitive with state-of-the-art implementations.

Abstract interpretation-based code certification for pervasive systems: Preliminary experiments

Proof carrying code is a general methodology for certifying that the execution of an untrusted mobile code is safe, according to a predefined safety policy. The basic idea is that the code supplier attaches a certifícate (or proof) to the mobile code which, then, the consumer checks in order to ensure that the code is indeed safe. The potential benefit is that the consumer's task is reduced from the level of proving to the level of checking, a much simpler task. Recently, the abstract interpretation techniques developed in logic programming have been proposed as a basis for proof carrying code [1]. To this end, the certifícate is generated from an abstract interpretation-based proof of safety. Intuitively, the verification condition is extracted from a set of assertions guaranteeing safety and the answer table generated during the analysis. Given this information, it is relatively simple and fast to verify that the code does meet this proof and so its execution is safe. This extended abstract reports on experiments which illustrate several issues involved in abstract interpretation-based code certification. First, we describe the implementation of our system in the context of CiaoPP: the preprocessor of the Ciao multi-paradigm (constraint) logic programming system. Then, by means of some experiments, we show how code certification is aided in the implementation of the framework. Finally, we discuss the application of our method within the área of pervasive systems which may lack the necessary computing resources to verify safety on their own. We herein illustrate the relevance of the information inferred by existing cost analysis to control resource usage in this context. Moreover, since the (rather complex) analysis phase is replaced by a simpler, efficient checking process at the code consumer side, we believe that our abstract interpretation-based approach to proof-carrying code becomes practically applicable to this kind of systems.

Bridge transformation for continuation call-based tabled execution.

The advantages of tabled evaluation regarding program termination and reduction of complexity are well known —as are the significant implementation, portability, and maintenance efforts that some proposals (especially those based on suspension) require. This implementation effort is reduced by program transformation-based continuation call techniques, at some efficiency cost. However, the traditional formulation of this proposal by Ramesh and Cheng limits the interleaving of tabled and non-tabled predicates and thus cannot be used as-is for arbitrary programs. In this paper we present a complete translation for the continuation call technique which, using the runtime support needed for the traditional proposal, solves these problems and makes it possible to execute arbitrary tabled programs. We present performance results which show that CCall offers a useful tradeoff that can be competitive with state-of-the-art implementations.

An Asymptotic Solution for Surface Fields on a Dielectric-Coated Circular Cylinder with an Effective Impedance Boundary Condition.

Reverberation chambers are well known for providing a random-like electric field distribution. Detection of directivity or gain thereof requires an adequate procedure and smart post-processing. In this paper, a new method is proposed for estimating the directivity of radiating devices in a reverberation chamber (RC). The method is based on the Rician K-factor whose estimation in an RC benefits from recent improvements. Directivity estimation relies on the accurate determination of the K-factor with respect to a reference antenna. Good agreement is reported with measurements carried out in near-field anechoic chamber (AC) and using a near-field to far-field transformation.

Towards a lightweight mobile semantic-based approach for enhancing interaction with smart objects

This work describes a semantic extension for a user-smart object interaction model based on the ECA paradigm (Event-Condition-Action). In this approach, smart objects publish their sensing (event) and action capabilities in the cloud and mobile devices are prepared to retrieve them and act as mediators to configure personalized behaviours for the objects. In this paper, the information handled by this interaction system has been shaped according several semantic models that, together with the integration of an embedded ontological and rule-based reasoner, are exploited in order to (i) automatically detect incompatible ECA rules configurations and to (ii) support complex ECA rules definitions and execution. This semantic extension may significantly improve the management of smart spaces populated with numerous smart objects from mobile personal devices, as it facilitates the configuration of coherent ECA rules.

Surface Impedance Characterization for UTD Based Solution with IBC for Surface Fields on a Dielectric-Coated PEC Circular Cylinder

A novel formulation for the surface impedance characterization is introduced for the canonical problem of surface fields on a perfect electric conductor (PEC) circular cylinder with a dielectric coating due to a electric current source using the Uniform Theory of Diffraction (UTD) with an Impedance Boundary Condition (IBC). The approach is based on a TE/TM assumption of the surface fields from the original problem. Where this surface impedance fails, an optimization is performed to minimize the error in the SD Green?s function between the original problem and the equivalent one with the IBC. This new approach requires small changes in the available UTD based solution with IBC to include the geodesic ray angle and length dependence in the surface impedance formulas. This asymptotic method, accurate for large separations between source and observer points, in combination with spectral domain (SD) Green?s functions for multidielectric coatings leads to a new hybrid SD-UTD with IBC to calculate mutual coupling among microstrip patches on a multilayer dielectric-coated PEC circular cylinder. Results are compared with the eigenfunction solution in SD, where a very good agreement is met.

Employment rate impacts of charging the Heavy Good Vehicle corridor (Madrid-Sevilla) across Spanish regions: a Random Utility Based Multiregional Input-Output approach

The implementation of a charging policy for heavy goods vehicles in European Union (EU) member countries has been imposed to reflect costs of construction and maintenance of infrastructure as well as externalities such as congestion, accidents and environmental impact. In this context, EU countries approved the Eurovignette directive (1999/62/EC) and its amending directive (2006 /38/EC) which established a legal framework to regulate the system of tolls. Even if that regulation seek s to increase the efficien cy of freight, it will trigger direct and indirect effects on Spain’s regional economies by increasing transport costs. This paper presents the development of a multiregional Input-Output methodology (MRIO) with elastic trade coefficients to predict in terregional trade, using transport attributes integrated in multinomial logit models. This method is highly useful to carry out an ex-ante evaluation of transport policies because it involves road freight transport cost sensitivity, and determine regional distributive and substitution economic effect s of countries like Spain, characterized by socio-demographic and economic attributes, differentiated region by region. It will thus be possible to determine cost-effective strategies, given different policy scenarios. MRIO mode l would then be used to determine the impact on the employment rate of imposing a charge in the Madrid-Sevilla corridor in Spain. This methodology is important for measuring the impact on the employment rate since it is one of the main macroeconomic indicators of Spain’s regional and national economic situation. A previous research developed (DESTINO) using a MRIO method estimated employment impacts of road pricing policy across Spanish regions considering a fuel tax charge (€/liter) in the entire shortest cost path network for freight transport. Actually, it found that the variation in employment is expected to be substantial for some regions, and negligible for others. For example, in this Spanish case study of regional employment has showed reductions between 16.1% (Rioja) and 1.4% (Madrid region). This variation range seems to be related to either the intensity of freight transport in each region or dependency of regions to transport intensive economic sect ors. In fact, regions with freight transport intensive sectors will lose more jobs while regions with a predominantly service economy undergo a fairly insignificant loss of employment. This paper is focused on evaluating a freight transport vehicle-kilometer charge (€/km) in a non-tolled motorway corridor (A-4) between Madrid-Sevilla (517 Km.). The consequences of the road pricing policy implementation show s that the employment reductions are not as high as the diminution stated in the previous research because this corridor does not affect the whole freight transport system of Spain.

La rehabilitación de construcciones militares para uso hotelero: la red de Paradores de Turismo, (1928-2012)

Fundamento de la tesis: Al comienzo del siglo XX, el interés por el turismo unido a la necesidad de restaurar un abundante patrimonio histórico, posibilitó en España que los poderes públicos se embarcaran en una singular experiencia: la creación de una infraestructura hotelera a partir de la rehabilitación de edificios históricos. La preservación, mantenimiento e incluso rentabilidad de una gran parte del patrimonio español se haría efectiva a través de la innovadora fórmula patrimonio‐turismo, cuya máxima expresión se materializó en la Red de Paradores desde su fundación en la segunda década del siglo pasado hasta nuestros días. Sorprendentemente, este tema no ha sido todavía investigado en su vertiente arquitectónica pese a que España ha sido pionera y modelo en la cuestión de la hotelería pública. Este trabajo aborda el estudio del caso más significativo de todos los edificios de la red, en tanto que el patrimonio que ha servido de base a los fines hoteleros del Estado ha contado con un total de seis tipos arquitectónicos a lo largo de su historia, dentro de los cuales la arquitectura militar despunta con su mayoritaria presencia dentro del contexto de los edificios históricos de la red. El carácter arquetípico de los castillos y fortalezas, arraigado en el inconsciente colectivo, les hizo especialmente atractivos como alojamiento turístico al permitir evocar la remota época medieval, pese a ser el tipo arquitectónico más comprometido para la rehabilitación hotelera. El estudio de las intervenciones operadas en estos inmuebles se revela de forma clara como escaparate de los distintos criterios de intervención patrimonial que se han sucedido en el siglo XX, hasta enlazar con la perspectiva interdisciplinar actual. La tesis abarca en, primer lugar, diferentes aspectos generales relativos al promotor hotelero, la hotelería pública de ámbito nacional e internacional, y la caracterización de los inmuebles de la red estatal española, desde el punto de vista hotelero y arquitectónico, entendida esta última en sus tres escalas de influencia: la arquitectónica, la urbana o paisajística, y la del interiorismo. Se analiza en segundo término la arquitectura militar dentro del contexto de la Red de Paradores, desde la consideración de su transformación hotelera, para lo cual ha sido necesario realizar una clasificación propia, que abarca tanto edificios que respondieron a una estructura de cuartel, como castillos‐palacio, o fortalezas que habían servido a los fines de una orden religiosa militar, además de considerarse las intervenciones en recintos históricos de carácter militar, donde se hacía obligatorio construir de nueva planta. En tercer y último lugar, se analiza a lo largo de las distintas etapas del organismo turístico las rehabilitaciones realizadas en estas construcciones militares, a la vez que se tienen en cuenta las intervenciones en los restantes edificios históricos, para evitar la descontextualización. Este recorrido comienza con la promoción de los dos primeros paradores a cargo del Comisario Regio, el marqués de la Vega‐Inclán, que sirvieron para sentar las bases de los conceptos e ideas que habrían de desarrollarse en las siguientes décadas. Posteriormente, se desarrolló y tomó forma la red con el Patronato Nacional del Turismo, en la que las primeras intervenciones en tipos militares se tradujeron en reformas interiores de locales. La etapa clave de la red, y en particular de la arquitectura militar, tuvo lugar con el Ministerio de Información y Turismo, marcada por la “repristinación” de monumentos, tras un período preparatorio con la Dirección General del Turismo en el que lo militar había quedado de telón de fondo de otros tipos arquitectónicos. Tras el auge del Ministerio llegó el período de decadencia en el que los castillos y fortalezas desaparecieron de los intereses de las Secretarias de Turismo, hasta llegar a las inauguraciones de los novedosos establecimientos del siglo XXI y el resurgimiento del tipo militar con el parador de Lorca. Metodología empleada: Este trabajo de investigación se ha servido fundamentalmente de documentación inédita, procedente de diversos archivos, además de una muy extensa toma de datos in situ. Dentro del patrimonio analizado, los inmuebles que responden al tipo arquitectónico militar se han dividido en tres grandes grupos: inmuebles rehabilitados que entraron en funcionamiento en la red, inmuebles en proceso de transformación hotelera, e inmuebles que fueron adquiridos con fines hoteleros pero que no llegaron a rehabilitarse. Para cada uno de ellos ha sido necesario determinar en qué estado llegaron a manos de la Administración Turística, cuál fue el mecanismo a través del cual se adquirieron, en qué consistió su primera rehabilitación hotelera, y cuáles fueron las ampliaciones o reformas más significativas que se realizaron posteriormente. Estos datos se han sintetizado en fichas y se han extraído conclusiones al comparar cada unidad con el conjunto. Simultáneamente se introdujeron dos factores externos: la historia del turismo que permitió hacer una ordenación cronológica de los inmuebles según etapas, y la historia de la teoría y práctica de la intervención patrimonial en España que permitió comparar los criterios patrimoniales de la Administración competente respecto de las intervenciones de la Administración Turística, cuyo contacto se haría obligatorio a partir del Decreto, de 22 de abril de 1949, que dejaba bajo la tutela del Estado a todos los castillos y fortalezas. Aportación de la tesis: Con carácter general, la tesis centra una ordenación y sistematización completa del patrimonio inmobiliario de la red, desde el punto de vista de los tipos hoteleros y arquitectónicos, además de poner por primera vez en conexión distintos modelos de hotelería pública, para constituirse en el sustrato de futuras investigaciones. El estudio realizado se ha hecho extensivo a las distintas escalas que inciden de forma interconectada en la implantación de un parador: la arquitectónica, la urbana y la del interiorismo, hasta ahora referenciado desde la exclusiva visión arquitectónica. Se han definido las etapas de la historia de la red, no ya sólo a partir del hilo conductor de la cadena sucesiva de organismos turísticos, sino que por primera vez se hace en razón de la evolución que sufren las intervenciones patrimoniales a lo largo del tiempo, a la vez que se entra en conexión con la teoría y praxis de la restauración monumental. Con carácter particular, la arquitectura militar dentro del contexto de los paradores se destaca en el período del Ministerio, en el que se experimentaron todas las posibilidades que presentaba su rehabilitación. En este sentido se ha puesto de manifiesto en este trabajo un tipo híbrido de parador, a caballo entre la rehabilitación y la edificación de nueva planta, las dos formas básicas de establecimiento creadas en la Comisaría Regia, al que se ha denominado edificación de nueva planta en recinto histórico militar. Esta nueva caracterización se ha valorado como la forma más eficiente de implantar paradores, cuyas pautas arquitectónicas abarcaron un abanico de posibilidades: imitación de modelos arquitectónicos históricos con utilización de elementos patrimoniales prestados que dieran el valor de la historia, utilización de un lenguaje moderno, o la inspiración en la arquitectura vernácula. La amalgama de elementos, estilos e intervenciones sucesivas de ampliación fue la característica común tanto para la implantación de un parador en un edificio como en un recinto amurallado. La arquitectura militar transformada en establecimiento hotelero evidencia la vocación escenográfica de las intervenciones patrimoniales, secundada por el interiorismo, además de su aportación a la arquitectura hotelera en lo referente al confort, organización y funcionamiento de sus instalaciones. La tesis ahonda en los diversos aspectos de la rehabilitación hotelera apuntados de forma parcial por algunos autores, y pone de manifiesto la “ambientación medieval” operada en la arquitectura militar, que llegó a tener su máxima expresión con el criterio de la “unidad de estilo” del Ministerio de Información y Turismo. La rehabilitación hotelera dentro del contexto de la Red de Paradores, queda caracterizada en la tesis en relación a intervenciones en construcciones militares, cuya sistematización puede ser extrapolable a otros tipos arquitectónicos o cadenas hoteleras de titularidad pública, a partir del estudio que se ha avanzado en este trabajo. Thesis basis: At the beginning of the 20th century the interest in tourism added to the plentiful heritage in Spain enabled the authorities to embark on a singular experience: the creation of a hotel infrastructure from the restoration of historic buildings. Preservation, maintenance, and even profitability of a large part of the Spanish heritage would be effective through the innovative formula heritage-tourism. Its greatest expression materialized in the Paradores Network since its foundation in last century’s second decade to the present day. Surprisingly, this subject has not yet been investigated in its architectural aspect, even though Spain has been a pioneer and a model in the matter of public hotel business. This project tackles the study of the most significative case of all the network’s buildings, since the heritage which has served throughout history as a base for the State hotel purposes has altogether six architectural types, among which military architecture stands out with its majority presence in the context of the historical buildings of the network. The archetypal character of castles and fortresses, ingrained in the collective subconscious, made them specially attractive for tourist accommodation, as it allowed the evocation of far medieval times, despite being the most awkward architectural type for hotel restoration. The study of the interventions in these buildings clearly reveals itself as a showcase of the different criteria of heritage intervention along the 20th century, connecting to the present interdisciplinary perspective. Firstly, the thesis covers different general aspects regarding the hotel developer, the domestic and international public hotel business, and the description of the Spanish state network buildings from a hotel business and an architectural point of view, the latter from its three influence scales: architectural, urban or landscape, and interior design. Secondly, the transformation of the military architecture in the Paradores Network into hotels is analyzed. For that purpose it was necessary to create a specific classification, which included barrack-structured buildings, castle-palaces, or fortresses which served the purposes of military-religious orders. The interventions in those military historical places where new building became compulsory were also taken into consideration. Thirdly and lastly, the thesis analyses the restorations in these military constructions through the different stages of the tourist organization. In order to avoid decontextualization, interventions in other historical buildings were also considered. This route begins with the promotion of the two first Paradores by the Royal Commissioner, the marquis of Vega-Inclán, which paved the way for the concepts and ideas that were developed in the following decades. Subsequently, the network was developed and took shape with the National Tourism Board. The first interventions on military types were inside refurbishments. The Network’s key period, and in particular of its military architecture, took place with the Ministry of Information and Tourism, a time marked by the “restoration to its original state” of monuments. This stage arrived after a preparatory period with the State Tourist Office, when the military type was left as a backdrop for other architectural types. After the Ministry’s boom arrived a decline, in which castles and fortresses disappeared from the Tourist Department’s interests up to the opening of the 21st century new establishments and the resurgence of the military type with Lorca’s Parador. Methodology: The present research project has mainly used unpublished documentation from several archives and has done an extensive in situ data-gathering. Within the heritage analyzed, military buildings have been divided into three main groups: restored buildings that began to operate in the network, those in process of hotel transformation, and those acquired for hotel purposes, but which did not become restored. In each case, it has been necessary to determine the condition in which they arrived to the Tourist Administration, the procedure by which they were acquired, what their first hotel restoration consisted of, and which their subsequent most significative enlargements and alterations were. These facts have been synthesized in cards, and conclusions were drawn by comparing each unit with the whole. Simultaneously, two external factors were introduced: the history of tourism, that allowed establishing a chronological order according to different periods, and the history of Spanish heritage intervention’s theory and practice, that permitted to compare the heritage criteria from the competent Administration with those of the Tourist Administration’s interventions. Both Administrations came compulsorily into contact after the Decree of 22nd April 1949, by which all castles and fortresses became under the protection of the State. Thesis contribution: In general, the thesis focuses on a complete order and systematization of the network’s heritage buildings from the hotel and architectural types points of view, besides connecting for the first time different public hotel business models, becoming the substratum for future investigations. The study has included the different scales that impact interconnected on the establishment of a Parador: architectural, urban and interior design, only referenced to date from an architectural point of view. The Network’s history stages have been defined according to not only a consecutive series of tourist organizations, but also, and for the first time, to the evolution of heritage interventions over time, thus connecting with the theory and praxis of monumental restoration. In particular, within the Paradores, military architecture stands out in the Ministry’s period, in which all kind of restoration possibilities were explored. In this sense, the present project puts forth a hybrid type of Parador between restoration and new building, the two basic ways of establishment created in the Royal Commission, termed new building in military historic enclosure. This new characterization has been evaluated as the most efficient for establishing Paradores, whose architectonic guidelines include a wide range of possibilities: the imitation of historical architectonic models with use of borrowed heritage components that provide historical value, the use of modern language, or the inspiration in vernacular architecture. The amalgam of elements, styles and consecutive enlargement interventions was the common feature of the establishment of a Parador, both in a building or in a walled enclosure. The military architecture transformed into a hotel establishment gives proof of the scenographic vocation of heritage interventions, supported by interior design, as well as of its contribution to hotel architecture, related to its comfort, organization and the functioning of its facilities. The thesis delves into the diverse aspects of hotel restoration, partially pointed out by several authors, and puts forth the creation of a “medieval atmosphere” in military architecture, which came to its highest expression with the “unitary style” criteria of the Ministry of Information and Tourism. Hotel restoration within the context of the Paradores’ Network is defined in this thesis in relation to interventions in military constructions, whose systemization can be extrapolative to other architectural types or public hotel chains, based on the study which has been put forward in this project.

Transductive neurofuzzy-based torque control of a milling process: results of a case study

This paper presents the design and implementation of an intelligent control system based on local neurofuzzy models of the milling process relayed through an Ehternet-based application. Its purpose is to control the spindle torque of a milling process by using an internal model control paradigm to modify the feed rate in real time. The stabilization of cutting cutting torque is especially necessary in milling processes such as high-spedd roughing of steel moulds and dies tha present minor geometric uncertainties. Thus, maintenance of the curring torque increaes the material removal rate and reduces the risk of damage due to excessive spindle vibration, a very sensitive and expensive component in all high-speed milling machines. Torque control is therefore an interesting challenge from an industrial point of view.

Excitación y control de IGBTs de un inversor trifásico sinusoidal

El origen del proyecto se encuentra en la mejora de un inversor trifásico sinusoidal comercial sobre la base del estudio de las técnicas de excitación óptimas para los IGBTs que lo componen en su etapa de potencia. En las primeras fases de planteamiento del proyecto se propone una idea mucho más ambiciosa, la realización de un nuevo convertidor de emergencia, destinado al sector ferroviario, para dar servicio de climatización. Este convertidor está formado por la asociación en cascada de un bloque DC/DC elevador y un bloque inversor DC/AC trifásico controlado mediante PWM con modulación sinusoidal. Se pretendía así dar solución a las siguientes problemáticas detectadas en los convertidores comercializados hasta el momento: un bloque elevador excesivamente sobredimensionado, subsistemas de control independientes para los dos bloques que configuran el convertidor, adicionalmente, la tarjeta driver se rediseña con cada cambio de especificaciones por parte de un nuevo cliente y finalmente, las comunicaciones tanto de diagnosis como de mantenimiento necesitaban una importante actualización. Inicialmente, se ha realizado un estudio teórico de los bloques elevador e inversor para poder realizar el diseño y dimensionamiento de sus componentes tanto semiconductores como electromagnéticos. Una vez completada la parte de potencia, se estudia el control que se realiza mediante medidas directas y simulación tanto de la estrategia de control del elevador como del inversor. Así se obtiene una información completa de la funcionalidad de las tarjetas existentes. Se desea realizar el diseño de una única tarjeta controladora y una única tarjeta de drivers para ambos bloques. Por problemas ajenos, en el transcurso de este proyecto se cancela su realización comercial, con lo que se decide al menos crear la placa de control y poder gobernar un convertidor ya existente, sustituyendo la tarjeta de control del bloque elevador. Para poder fabricar la placa de control se divide en dos tarjetas que irán conectadas en modo sándwich. En una tarjeta está el microcontrolador y en otra está todo el interface necesario para operar con el sistema: entradas y salidas digitales, entradas y salidas analógicas, comunicación CAN, y un pequeño DC/DC comercial que proporciona alimentación al prototipo. Se realiza un pequeño programa funcional para poder manejar el convertidor, el cual con una tensión de 110V DC, proporciona a la salida una tensión de 380V AC. Como ya se ha expuesto, debido a la cancelación del proyecto industrial no se profundiza más en su mejora y se decide proponerlo para su evaluación en su fase actual. ABSTRACT. The beginning of the project is found in the improvement of a commercial sine wave three phase inverter which is based in a study about optimal excitation techniques to IGBTs which compose in the power stage. In the early phases of project it is proposed a much more ambitious idea, the fact of a new emergency converter, proposed for the rail sector to work in an air condition unit. This converter is formed by an association of a block cascaded DC/DC booster and a block DC/AC inverter three-phase controlled by a sine wave modulation PWM. The purposed was to give a solution to following problems detected in commercial converters nowadays: an excessively oversized block boost, independent control subsystems for two blocks that configure the converter. In addition, driver board is redesigned with each specifications change demand it a new customer, and finally, the communications, diagnostic and maintenance that needed a important upgrade. Initially, it has been performed a theoretical study of boost and the inverter blocks to be able to perform the component’s design and the size (semiconductor and electromagnetic fields). Once finished power study, it is analysed the control performed using direct measures and simulation of boost control strategy and inverter. With this it is obtained complete information about existing cards functionality. The project is looking for the design of just one controller card and one drivers´ card for both blocks. By unrelated problems, during the course of this project a commercial realization. So at least its decided to create control board to be able to existing converter, replacing boost block’s control board. To be able to manufacture control board it is divided in two cards connected in sandwiching mode. In a card is microcontroller and in another is all needed interface to operate with the system: digital inputs and outputs, analogical inputs and outputs, CAN communication, and a small DC / DC business that provide power supply to the prototype. It is performed a small functional program to handle the converter, which with an input voltage 110V DC provides an output voltage 380V AC. As already has been exposed, due to industrial project cancellation it is decided no to continue with all improvements and directly to evaluate it in the current phase.