Study of the brittle fracture of monocrystalline silicon wafers

There is a growing trend towards using thinner wafers in order to reduce the costs of solar energy. But the current tools employed during the solar cells production are not prepared to work with thinner wafers, decreasing the industrial yield due to the high number of wafers broken. To develop new tools, or modify existing ones, the mechanical properties have to be determined. This paper tackles an experimental study of the mechanical properties of wafers. First, the material characteristics are detailed and the process to obtain wafers is presented. Then, the complete test setup and the mechanical strength results interpreted by a described numerical model are shown.

Broadband access in complex environments: LTE on railway

This paper assesses the main challenges associated with the propagation and channel modeling of broadband radio systems in a complex environment of high speed and metropolitan railways. These challenges comprise practical simulation, modeling interferences, radio planning, test trials and performance evaluation in different railway scenarios using Long Term Evolution (LTE) as test case. This approach requires several steps; the first is the use of a radio propagation simulator based on ray-tracing techniques to accurately predict propagation. Besides the radio propagation simulator, a complete test bed has been constructed to assess LTE performance, channel propagation conditions and interference with other systems in real-world environments by means of standard-compliant LTE transmissions. Such measurement results allowed us to evaluate the propagation and performance of broadband signals and to test the suitability of LTE radio technology for complex railway scenarios.

Implantación de técnicas de QA en un proyecto de desarrollo software

Hoy en día existe una preocupación creciente por la calidad del software entregado en los proyectos que se realizan a lo largo del mundo. El trabajo de fin de grado que va a ser desarrollado en estas páginas pretende demostrar la importancia de la realización de tests funcionales durante el proceso de desarrollo de software para que el proyecto alcance la calidad requerida tan demandada en estos días. Para ello, después de una pequeña introducción a la historia del software, se presentarán y compararán diversos tipos de metodologías de desarrollo de software, tanto pesadas (cascada, espiral, etc.) como ágiles (Extreme Programming y Scrum), se enfatizará en dichas metodologías ágiles y cómo el proceso de testing y control de calidad encaja perfectamente con la filosofía de las citadas metodologías ágiles. Se desarrollará una explicación del papel de QA en el desarrollo de software, asi como una explicación de los tipos de test existentes, y las herramientas, tecnologías y patrones que existen a disposición de aquellos que quieran desempeñar el papel de QA. Para complementar el punto de vista teórico de este trabajo se presentará un caso práctico real realizado en la empresa bq bajo una metodología Scrum. Dicho caso práctico muestra el uso de ciertas herramientas y su aporte para el control de calidad del proyecto bajo desarrollo, demostrando su importancia. Se realizará énfasis en el proceso de automatización de ciertas baterías de test (llamadas test suites), mostrando desde el planteamiento inicial de las diferentes historias de usuario y la batería de test, pasando por la elección de las tecnologías más adecuadas para la elaboración de los test hasta llegar al lanzamiento de dicha batería de pruebas y la comprobación de éstas. El punto de vista práctico quedará complementado por una explicación del framework nightwatch.js, framework utilizado en el desarrollo del proyecto en bq para la automatización de test funcionales. Esta explicación comprenderá tanto la configuración y uso del framework como el uso de patrones y la estructura de las pruebas. ABSTRACT Nowadays there is a growing concern about the Quality of the software delivered in the projects that are made all around the world. This final project will try to prove the importance of performing functional tests during the Software Development Process in order to be able to reach the demanded Quality. To fulfill this objective, different types of Software Development methodologies will be presented and compared. Heavy methodologies (waterfall, spiral methodologies, etc.) as well as agile methodologies (Extreme Programming and Scrum). There will be an emphasis in the second kind (agile methodologies) and how the testing and quality assurance process fits perfectly in their philosophy. A deep explanation of the role that Quality Assurance holds on software development will be presented, as well as an explanation on the current types of testing and an explanation of the different tools; technologies and patrons that exist to help anyone who wants to perform the role of QA. To complement the theoretical perspective of this work a real case study, performed at the company bq under a Scrum methodology, will be presented. The mentioned study covers the use of certain tools and their input for the quality assurance of the project under development, proving its relevance. Emphasis will be made in the process of conducting a set of tests (called test suite), showing from the initial approach of the different users stories and the set of tests, going through the choosing of the most suitable technologies for the tests development, and ending with the performance of this battery of tests and their checkout. The practical point of view will be complemented by a deep explanation of the creation process using the nightwatch.js automated test framework, used in the project in bq. This explanation will cover both the configuration and use of the framework as the use of patterns and structure of the tests.

Longitudinal Changes in Response to a Cycle-Run Field Test of Young Male National "Talent identification" and Senior Elite Triathlon Squads.

This study investigated the changes in cardiorespiratory response and running performance of 9 male ?Talent Identification? (TID) and 6 male Senior Elite (SE) Spanish National Squad triathletes during a specific cycle-run test. The TID and SE triathletes (initial age 15.2±0.7 vs. 23.8±5.6 years, p=0.03; tests through the competitive period and the preparatory period, respectively, of two consecutive seasons: Test 1 was an incremental cycle test to determine the ventilatory threshold (Thvent); Test 2 (C-R) was 30 min constant load cycling at the Thvent power output followed by a 3-km time trial run; and Test 3 (R) was an isolated 3-km time trial control run, in randomized counterbalanced order. In both seasons the time required to complete the C-R 3-km run was greater than for R in TID (11:09±00:24 vs. 10:45±00:16 min:ss, pmenor que 0.01; and 10:24±00:22 vs. 10:04±00:14, p=0.006, for season 2005/06 and 2006/07, respectively) and SE (10:15±00:19 vs. 09:45±00:30, pmenor que 0.001 and 09:51±00:26 vs. 09:46±00:06, p= 0.02 for season 2005/06 and 2006/07, respectively). Compared to the first season, completion of the time trial run was faster in the second season (6.6%, pmenor que 0.01 and 6.4%, pmenor que 0.01, for C-R and R test, respectively) only in TID. Changes in post-cycling run performance were accompanied by changes in pacing strategy but only slight or non-significant changes in the cardiorespiratory response. Thus, the negative effect of cycling on performance may persist, independently of the period, over two consecutive seasons in TID and SE triathletes; however A improvements over time suggests that monitoring running pacing strategy after cycling may be a useful tool to control performance and training adaptations in TID. O2max 77.0±5.6 vs. 77.8±3.6 mL·kg-1·min-1, NS) underwent three TE D EP C C

Preliminary temperature Accelerated Life Test (ALT) on III-V commercial concentrator triple-junction solar cells

A quantitative temperature accelerated life test on sixty GaInP/GaInAs/Ge triple-junction commercial concentrator solar cells is being carried out. The final objective of this experiment is to evaluate the reliability, warranty period, and failure mechanism of high concentration solar cells in a moderate period of time. The acceleration of the degradation is realized by subjecting the solar cells at temperatures markedly higher than the nominal working temperature under a concentrator Three experiments at three different temperatures are necessary in order to obtain the acceleration factor which relates the time at the stress level with the time at nominal working conditions. . However, up to now only the test at the highest temperature has finished. Therefore, we can not provide complete reliability information but we have analyzed the life data and the failure mode of the solar cells inside the climatic chamber at the highest temperature. The failures have been all of them catastrophic. In fact, the solar cells have turned into short circuits. We have fitted the failure distribution to a two parameters Weibull function. The failures are wear-out type. We have observed that the busbar and the surrounding fingers are completely deteriorate

Towards a complete propagation of nuclear data uncertainties Fission yields and decay data

Propagation of nuclear data uncertainties to calculated values is interesting for design purposes and libraries evaluation. XSUSA, developed at GRS, propagates cross section uncertainties to nuclear calculations. In depletion simulations, fission yields and decay data are also involved and suppose a possible source of uncertainty that must be taken into account. We have developed tools to generate varied fission yields and decay libraries and to propagate uncertainties trough depletion in order to complete the XSUSA uncertainty assessment capabilities. A simple test to probe the methodology is defined and discussed.

Generador de exámenes de test aleatorio

En este documento se detalla, la planificación y elaboración de un paquete que respeta el estándar S4 de programación en lenguaje R. El paquete consiste en una serie de métodos y clases para la generación de exámenes tipos test y soluciones a partir de un archivo xls, que hace las funciones de una base de datos. El diseño propuesto está orientado a objetos y desarrolla un conjunto de clases que representan los contenidos de una prueba de evaluación tipo test: enunciados, peguntas y respuestas. Se ha realizado una implementación sencilla de un prototipo con las funciones básicas necesarias para generar los tests. Además se ha generado la documentación necesaria para crear el paquete, esto significa que cada método tiene una página de ayuda, que se podrá consultar desde un terminal con R, dicha documentación incluye ejemplos de ejecución de cada método.---ABSTRACT---In this document is detailed the elaboration and development of a package that meets the standard S4 of programming language R. This package consists of a group of methods and classes used for the generation of test exams and their solutions starting from a xls format file wich plays the role of a data base at the same time. These classes have been grouped in a way that the user could have a complete and easy vision of them. This division has been done by using data storage and functions whose tasks are more or less the same. Furthermore, the necessary documentation to create this package has also been generated, that means that every method has a help page wich can be called from a R terminal if necessary. This documentation has examples of the execution of every method.

Preliminary temperature accelerated life test (ALT) on lattice mismatched triple-junction concentrator solar cells-on-carriers

A temperature accelerated life test on concentrator lattice mismatched Ga0.37In0.63P/Ga0.83In0.17As/Ge triple-junction solar cells-on-carrier is being carried out. The solar cells have been tested at three different temperatures: 125, 145 and 165°C and the nominal photo-current condition (500X) is emulated by injecting current in darkness. The final objective of these tests is to evaluate the reliability, warranty period, and failure mechanism of these solar cells in a moderate period of time. Up to now only the test at 165°C has finished. Therefore, we cannot provide complete reliability information, but we have carried out preliminary data and failure analysis with the current results.