Technical Challenges in the Construction of Gothic Vaults: The Gothic Theory of Structural Design

The construction of a Gothic vault implied the solution of several technical challenges. The literature on Gothic vault construction is quite large and its growth continues steadily. The main challenge of any structure is that, during and after construction, it must be "safe", that is, it must not collapse. Indeed, it must be amply safe, able to support different loads for long periods of time. Masonry architecture has shown its structural safety for centuries or millennia. The Pantheon of Rome stands today after almost 2,000 years without having needed any structural reinforcement (of course, the survival of any building implies continuous maintenance) . Hagia Sophia in Istanbul, finished in the 6th century AD, has withstood not only the dead loads but also many severe earthquakes . Finally, the Gothic cathedrals, with their appearance of weakness, are• more than a half millennium old. The question arises of what the source of this amazing strength is and how the illiterate master masons were able to design such daring and safe structures . This question is usually evaded in manuals of Gothic architecture. This is quite surprising, the structure being a fundamental part of Gothic buildings. The present article aims to give such an explanation, which has been studied in detail elsewhere. In the first part, the Gothic design methods "V ill be discussed. In the second part, the validity of these methods wi11 be verified within the frame of the modern theory of masonry structures . References have been reduced to a minimum to make the text simpler and more direct.

Late Gothic German Vault Design Methods and Its Relationship with Spanish Ribbed Vaults

The arrival of European master masons to Burgos and Toledo during the mid-fifteenth century was essential for the promotion of the late Gothic ribbed vault design techniques in Spain. The Antigua Chapel in Seville Cathedral, designed by the Spanish master mason Simón de Colonia on 1497, provides an outstanding case study on this subject. This vault is characterized by the interlacing of the ribs near the springing, reflecting the influence of German ribbed vault designs. This paper analyses the relationship between German ribbed vaults and their design methods with those of Spanish ribbed vaults; with particular attention to the presence of ribs that cut through one another above the springing, materialized in the work of Simón de Colonia. This characteristic is reflected in some manuscripts in the German area, like the Wiener Sammlungen (15th-16th centuries) and the Codex Miniatus 3 (ca. 1560-1570), but no Spanish documents of the same period make reference to it.

Technological development in Spanish gothic vaults design

The principle of complexity as the evolution vector of the gothic style was an idea largely developed by Paul Frankl. The high complexity reached in the 15th and 16th centuries was possible thanks to the geometrical resources developed in the workshops of the medieval stonemasons. The search for more sophisticated designs was possible also with the higher standardization, so that the most complex ribbed vault could be built with ribs that had all the same curvature and with voussoirs that were therefore identical. Spanish Gothic architecture has been deeply studied from a historical and artistic point of view. The present paper, as a complement to these analyses, aims to point out some of the geometrical methods and technological improvements that late medieval masons were able to develop. In that way, some selected vaults have been measured, in order to study their geometry and design process. Also scale models of some vaults have been built at the Escuela de Arquitectura (Madrid) to validate these geometrical principles. More than just a research method, the scale models allow to understand the medieval construction techniques, and they are a powerful pedagogical tool with which pupils can reach a rewarding experience based on the “medieval-way” praxis.

The Gothic Ribbed vaults in Rodrigo Gil de Hontañón

The Gothic Ribbed vaults in Rodrigo Gil de Hontañón. Second International Congress on Construction History. Construction History Society. Cambridge. Reino Unido. Vol: III. Pags: 2415-2431. ISBN. 0-7017-0205-2

Crossed-arch vaults in late-gothic and early Renaissance vaulting: a problem in building technology transfer

Crossed-arch vaults are a particular type of ribbed vaults. Their main feature is that the ribs that form the vault are intertwined, forming polygons or stars and leaving an empty space in the middle. The firsts appear in Córdoba in the second half of the 10th Century. Afterwards, the type diffused through Spain and North Africa, 11th_13th Centuries. These vaults reappear in Armenia in the 13th Century. In the 14th and 15th Century a few examples are found both in England (Durham, Raby) and Central Europe (Prague, Landshut, Vienna). At about the same time, Leonardo da Vinci produced designs for the Tiburio (Ciborium) of Milan cathedral with a cross-arched structure and proposed tests to assess the strength; he also, made use of the same pattern of vault for Renaissance centralized churches. Eventually, the type can be tracked through the 17th (Guarini) and 18th (Vittone) Centuries, until Spanish post war architecture in the 1940-60s (Moya). Some questions arose, which so far, have not been answered. How was it possible that a particular type of vault had such enormous geographical spread? How was it transmitted from Córdoba to the Caucasus? The matter is one of transfer of knowledge, ideas, and technology; it relates both aesthetics and construction.

Desarrollo de modelos 3D de los edificios de contención de la Central Nuclear de Almaraz y de la Central Nuclear de Trillo con el código GOTHIC 8.0

El análisis de los accidentes tipo LOCA o MSLB en una contención PWR-W normalmente se simulan con la opción de volúmenes de control con parámetros agrupados en GOTHIC, ya que es lo que hasta ahora se ha considerado adecuado para el análisis de licencia. Sin embargo, para el estudio de detalle del comportamiento termo-hidráulico de cada recinto de la contención, podría ser más adecuado contar con un modelo tridimensional que representase más fielmente la geometría de la contención. El objetivo de la primera fase del proyecto de investigación de CNAT y la UPM es la construcción de varios modelos tridimensionales detallados con el código GOTHIC 8.0 de los edificios de contención de una planta tipo PWR-W y KWU, correspondientes a la Central Nuclear de Almaraz (CNA) y Trillo (CNT) respectivamente.

Las teorías del gótico y su representación gráfica en España el último tercio del siglo XIX. Un estudio sobre: Some Account of Gothic Architecture in Spain, de George Edmund Street

La tesis se centra en el estudio, descripción y análisis del libro publicado por el arquitecto británico George Edmund Street en 1865, bajo el título Some Account of Gothic Architecture in Spain. El libro dio a conocer una de la colecciones más importantes de dibujos realizada en el siglo XIX sobre la arquitectura gótica española, y por lo tanto fue una primera referencia para su estudio, hasta bien entrado el siglo veinte. El volumen incluyó 107 grabados de diversos tipos de edificios con perspectivas y detalles, y 25 láminas con 45 planos de plantas de iglesias y claustros, muchos de ellos publicados por primera vez. Gracias a varias campañas de verano por la mitad norte del país, la casi inexplorada -desde un punto de vista académico- arquitectura española medieval fue finalmente descubierta. Este hecho conduce a una pregunta intrigante que está en el origen de esta investigación ¿cómo pudo Street en pocos viajes sentar las bases de la historia del gótico español que hasta entonces los estudiosos españoles no habían sido capaces de definir? Esta tesis comienza describiendo la obra de Street en su contexto cultural con un breve repaso a su biografía y a su posición profesional y teórica. También su relación con las personas más representativas que participaron en el estudio de la arquitectura gótica, como Robert Willis, William Whewell, Augustus Pugin, o George G. Scott. Se ha prestado especial atención, en explicar su papel relevante en el Gothic Revival, para entender el significado de su interés en la arquitectura gótica continental. Estos capítulos preliminares son seguidos por una revisión del papel del dibujo como herramienta para la arquitectura de los viajeros en sus rutas en busca de la arquitectura gótica. También se trata la influencia de la Royal Academy y sus académicos, (entre los cuales estuvo Street) y su formación académica. Finalmente la tesis entra en el estudio de los planos arquitectónicos que Street hizo durante sus viajes continentales de arquitectura, seguido por una descripción detallada de sus dibujos de España, analizando su método, su técnica, y las nuevas características aportadas, que fueron una novedad en el contexto español. También se lleva a cabo algunos estudios comparativos de los dibujos de España, gracias a una recopilación exhaustiva de bocetos y dibujos originales de Street, que en su gran mayoría se conservan en los archivos del RIBA, cotejándolos con sus versiones finales, con dibujos de la época de otros autores sobre los mismos edificios, y con fotos recientes. La tesis deja claro por qué y cómo Street, gracias a su soporte teórico y habilidades para el dibujo, pudo realizar algo que había pasado desapercibido para los estudiosos españoles de la época (construcción, historia de los estilos, señalamiento de períodos constructivos), lo que le permitió encontrar el lugar adecuado de la arquitectura gótica española en la historia y en el mapa de la arquitectura gótica europea. ABSTRACT This thesis focuses on the study, description and analysis of the book published by the British architect George Edmund Street in 1865, under the title Some Account of Gothic Architecture in Spain. The book displayed one of the most significant collections of drawings on Spanish Gothic Architecture made in the nineteenth century, and therefore was a first reference for its study, until well into the twentieth century. The book included 107 engravings, the surveying of various types of buildings with perspectives and details, and 25 sheets containing 45 ground plans of churches and cloisters, many of them new and published for the first time. Thanks to several summer campaigns in the north half of the country, the almost unexplored -from a scholar point of view- medieval Spanish architecture was eventually revealed. This fact lead to an intriguing question that is at the origin of this research: how could Street in a few trips lay the foundations of the history of Spanish Gothic that until then Spanish scholars had not been able to define? This thesis begins inscribing this Street's work in his cultural context. A brief review of his biography and professional and theoretical positions has been seen as necessary. Also his debts and relationship with the most representative people involved in the study of Gothic architecture, like Robert Willis, William Whewell, Augustus Pugin, or George G. Scott are discussed. Special attention has been paid, taken into account his relevant role in the Gothic Revival, to understand the significance of his interest in continental Gothic architecture. These preliminary chapters are followed by a review of role of drawing as a tool for Architectural travellers in their Tours in search of the Gothic architecture. The influence of the Royal Academy and its academicians, (among which was Street) and his educational background are here tackled. Eventually this thesis enters into the study of the architectural drawings Street made during his continental architectural journeys, which is followed by a detailed description and analysis of the Spanish ones: his methods, his technique, and the new features which were a novelty in the Spanish context are explored. Also in this thesis is carried out some comparative studies thanks to a previous exhaustive gathering of Street's sketches and original drawings, most of which are preserved in the RIBA archives. Their final versions, drawings of the same buildings from other contemporary draughtsman and pictures of their current state are compared with them. This thesis makes clear why and how Street thanks to his theoretical back-ground and portraying skills could realize what have passed unnoticed by contemporary Spanish scholars (construction, genealogy of forms, dating of periods) allowing him to find the proper place of the Spanish architecture in the history and the map of European Gothic architecture.

Preliminary Study and Proposal for Restoring a Jesuit College at Saragossa, Spain

A historical study and a construction pathology survey were conducted prior to proposing a solution for restoring the upper windows on the south side of Old San Carlos College at Saragossa (16th-17th centuries), wich had been forteited to add a third storey to the cloister. Althought initially designed to a simple large hall format, the church is a harmonius blend of Aragonese Gothic architecture and typical Jesuit scheme, consisting in a central nave flanket by chapel-confessional and raised galleries for the community. A subsequent enlargement of the roof, wich rests on the original framing over the central nave, reduced the mechanical strength of the principal rafters on the opposite side, prompting a concomitant imbalance of forces that has affected the entire structure. In view of the foregoing, in addition to restituting the upper window, the proposal solution envisages restoring the roof over the central nave to its original design, and with the interior lighting in the church.

Functionalism and Caprice in Stonecutting. The Case of the Nativity Chapel in Burgos Cathedral

Starting from the inaugural text of Philibert de L'Orme, stereotomic treatises and manuscripts are subject to the opposing forces of reason and fancy. The Nativity Chapel in Burgos Cathedral provides an outstanding case study on this subject. It was built in 1571-1582 by Martín de Bérriz and Martín de la Haya, using an oval vault resting on trumpet squinches to span a rectangular bay. Bed joints and rib axes are not planar curves, as usual in oval vaults. This warping is not capricious; we shall argue that it is the outcome of a systematic tracing method. As a result of this process, the slope of the bed joints increases slightly in the first courses, but stays fairly constant after the third course; this solution prevents the upper courses from slipping. Thus, in the Nativity Chapel of Burgos Cathedral, the constraints of masonry construction fostered a singular solution verging on capriccio. It is also worthwhile to remark that the warping of the joints is not easily appreciable to the eye and that the tracing process does not seem to start from a previous conception of the resulting form. All this suggests that we should be quite careful when talking about the whimsical character of Late Gothic and Early Renaissance; in some occasions, apparent caprice is the offspring of practical thinking.

The Islamic Crossed-Arch Domes in Cordoba: Geometry and Structural Analysis of the “Capilla de Villaviciosa”

Crossed-arch domes are a singular type of ribbed vaults. Their characteristic feature is that the ribs that form the vault are intertwined, forming polygons or stars, leaving an empty space in the centre. The earliest known vaults of this type are found in the Great Mosque of Córdoba, built ca. 960 a.C. The type spread through Spain, and the north of Africa in the 10th to the 16th Centuries, and was used by Guarini and Vittone in the 17th and 18th Centuries in Italy. However, it was used only in a few buildings. Though the literature about the structural behaviour of ribbed Gothic vaults is extensive, so far no structural analysis of crossed arch domes has been made. The purpose of this work is, first to show the way to attack such an analysis within the frame of Modern Limit Analysis of Masonry Structures (Heyman 1995), and then to apply the approach to study the stability of the dome of the Capilla de Villaviciosa. The work may give some clues to art and architectural historians to understand better the origin and development of Islamic dome architecture.

Wedges and plate-bandes: mechanical theories after De la Hire

Plate-bandes are straight masonry arches (they are called, also, flat arches or lintel arches). Ideally they have the surfaces of extrados and intrados plane and horizontal. The stones or bricks have radial joints converging usually in one centre. The voussoirs have the form of wedges and in French they are called "claveaux". A plate-bande is, in fact, a lintel made of several stones and the proportions of lintels and plate-bandes are similar. Proportions of plate-bandes, that is the relationship between the thickness t and the span s (t/s)varies, typically between 1/4–1/3 in thick plate-bandes, and is less than 1/20 in the most slender ones. A ratio of circa 1/8 was usual in the 18th Century and follows a simple geometrical rule: the centre form with the intrados an equilateral triangle and the plate-bande should contain an arc of circle. The joints are usually plane, but in some cases present a «rebated» or «stepped» form. Plate-bandes exert an inclined thrust as any masonry arch. This thrust is usually very high and it requires either massive buttresses, or to be built in the middle of thick walls. Master builders and architects have tried since antiquity to calculate the abutment necessary for any arch. A modern architect or engineer will measure the arch thrust in units of force, kN or tons. Traditionally, the thrust has been measured as the size of the buttresses to resist it safely. Old structural rules, then, addressed the design problem establishing a relationship between the span and the depth of the buttress. These were empirical rules, particular for every type of arch or structure in every epoch. Thus, the typical gothic buttress is 1/4 of the vault span, but a Renaissance or baroque barrel vault will need more than 1/3 of the span. A plate-bande would require more than one half of the span; this is precisely the rule cited by the French engineer Gautier, who tried unsuccessfully to justify it by static reasons. They were used, typically, to form the lintels of windows or doors (1-2 m, typically); in Antiquity they were used, also, though rarely, at the gates of city walls or in niches (ca. 2 m, reaching 5.2 m). Plate-bandes may show particular problems: it is not unusual that some sliding of the voussoirs can be observed, particularly in thick plate-bandes. The stepped joints on Fig. 1, left, were used to avoid this problem. There are other «hidden» methods, like iron cramps or the use of stone wedges, etc. In seismic zones these devices were usual. Another problem relates to the deformation; a slight yielding of the abutments, or even the compression of the mortar joints, may lead to some cracking and the descent of the central keystone. Even a tiny descent will convert the original straight line of the intrados in a broken line with a visible «kink» or angle in the middle. Of course, both problems should be avoided. Finally, the wedge form of the voussoirs lead to acute angles in the stones and this can produce partial fractures; this occurs usually at the inferior border of the springers at the abutments. It follows, that to build a successful plate-bande is not an easy matter. Also, the structural study of plate-bandes is far from simple, and mechanics and geometry are related in a particular way. In the present paper we will concentrate on the structural aspects and their constructive consequences, with a historical approach. We will outline the development of structural analysis of plate-bandes from ca. 1700 until today. This brief history has a more than purely academic interest. Different approaches and theories pointed to particular problem, and though the solution given may have been incorrect, the question posed was often pertinent. The paper ends with the application of modern Limit Analysis of Masonry Structures, developed mainly by professor Heyman in the last fifty years. The work aims, also, to give some clues for the actual architect and engineer involved in the analysis or restoration of masonry buildings.

La luz natural como generadora del espacio arquitectónico de la catedral gótica

La historia de la construcción de las catedrales góticas es la historia de la búsqueda de la luz. Esta afirmación casi metafísica, recoge una realidad asumida por todos los historiadores tanto de la arquitectura antigua como del resto de las artes. La luz en el gótico ha sido descrita bajo múltiples matices como son su carácter simbólico, cromático e incluso místico, sin embargo no existe, en el estudio del conocimiento de la luz gótica, ninguna referencia a la misma como realidad física cuantificable, cualificable y por tanto, clasificable. La presente tesis doctoral aborda el concepto de la iluminación gótica desde una perspectiva nueva. Demuestra, con un método analítico inédito, que la iluminación gótica es cuantificable y cualificable. Para ello analiza en profundidad la iluminación de una selección de 6 edificios muestra, las catedrales de Gerona, Toledo, Sevilla y León, la basílica de Santa María del Mar y la capilla de la Sainte Chapelle de París, mediante una toma de datos “in situ” de iluminación y su comparación con los datos lumínicos obtenidos por un programa de soleamiento de la simulación en tres dimensiones de los distintos proyectos originales góticos. El análisis exhaustivo de las muestras y su introducción en el método analítico descrito, permite determinar, en primer lugar, unas cualidades inéditas que identifican la luz de los espacios góticos según unos parámetros nuevos como son la intensidad, expresividad, recorrido, distorsión y color. También describe cuales son los factores determinantes, de nuevo inéditos, que modulan cada una de las cualidades y en que proporción lo hacen cada uno de ellos. Una vez establecidas las cualidades y los factores que las definen, la tesis doctoral establece los rangos en los que se mueven las distintas cualidades y que conformarán la definitiva clasificación según “tipos de cualidad lumínica”. Adicionalmente, la tesis propone un procedimiento abreviado de acercamiento a la realidad de la iluminación gótica a través de unas fórmulas matemáticas que relacionan los factores geométricos detectados y descritos en la tesis con el resultado luminoso del espacio en lo que concierne a las dos cualidades más importantes de las reflejadas, la intensidad y la expresividad. Gracias a este método y su procedimiento abreviado, la clasificación se hace extensible al resto de catedrales góticas del panorama español y europeo y abre el camino a nuevas clasificaciones de edificios históricos de distintas épocas, iniciando un apasionante camino por recorrer en la recuperación de “la luz original”. Esta clasificación y sus cualidades podrán a su vez, ser utilizadas como herramientas de conocimiento de un factor determinante a la hora de describir cualquier espacio gótico y su aportación pretende ser un nuevo condicionante a tener en cuenta en el futuro, ayudando a entender y respetar, en las posibles intervenciones a realizar sobre el patrimonio arquitectónico, aquello que fue en su inicio motor principal del proyecto arquitectónico y que hoy día no se valora suficientemente tan solo por falta de conocimiento: su luz. The history of the construction of the Gothic cathedrals is the history of the search for light. This almost etaphysical statement reflects a reality accepted by all historians both of ancient architecture and other arts. Light in the Gothic period has been described under multiple approaches such as its symbolic, chromatic and even mystical character. However, in the study of the Gothic light, no references exist to it as a physical quantifiable and qualifiable reality and therefore, classifiable. This dissertation deals with the concept of Gothic light from a new perspective. With a new analytical method, it shows that Gothic lighting is quantifiable and can be classified regarding quality. To this end, a selection of 6 buildings light samples are analyzed; the cathedrals of Gerona, Toledo, Seville and León, the basilica of Santa María of the Sea and the Sainte Chapelle in Paris. "In situ" lighting data is collected and it is compared with lighting data obtained by a program of sunlight of the 3D simulation of various Gothic original projects. The comprehensive analysis of the samples and the data introduced in the analytical method described, allows determining, first, important qualities that identify the light of Gothic spaces according to new parameters such as intensity, expressiveness, trajectory, distortion and color. It also describes the determinant factors, which modulate each of the qualities and in what proportion they do it. Once the qualities and factors that define them have been established, in this doctoral dissertation the ranges regarding different qualities are set, which will make up the final classification according to "types of light quality". In addition, this work proposes an abbreviated procedure approach to the reality of the Gothic lighting through some mathematical formulae, relating the geometric factors identified and described in the study with the bright result of space regarding the two most important qualities of the light,intensity and expressiveness. Thanks to this method and to the abbreviated procedure, the classification can be applied to other Spanish and European Gothic cathedrals and opens up the way to new classifications of historic buildings from different eras, starting an exciting road ahead in the recovery of the "original light". This classification and its qualities may in turn be used as tools to know a determinant factor when describing any Gothic space. Its contribution is intended to be a new conditioning factor to keep in mind in the future, helping to understand and respect, in possible interventions on the architectural heritage, what was the main engine to start the architectural project and which today is not valued enough due to the lack knowledge: the light.

Geometric tools in Juan de Álava's stonecutting workshop

Stonemasonry of the Gothic vault in its totality is based upon geometry of the line, whereas classic stereotomy relies on the comprehensive knowledge of the surface and the highly sophisticated sides of the voussoirs necessary for its vaults. It is obvious that this leap in the art of construction was paralleled and accompanied by an extension of the horizons of geometry. In Spain, it was made possible thanks to the centuries-old tradition of stone building begun in the most remote medieval times and to the presence of outstanding architects or stonemasons such as Juan de Álava, whose professional work surpassed the established limits and provided the art of building with new instruments.

The Irregular Ribbed Vault of the Sacristy of the Cathedral of Saint-Jean Baptiste in Perpignan

The vault of the sacristy of the Cathedral of Saint-Jean Baptiste in Perpignan (France), constructed by the Majorcan architect Guillem Sagrera between 1433 and 1447, is an outstanding, yet strikingly unknown, example of rib vaulting. This paper analyzes the overall construction of the form of the vault, characterized by its highly irregular perimeter, with particular attention to an isolated decorated corbel which solves the problem of the wall support of a group of six ribs and is in stark contrast with the rest of the supports, which are completely unadorned. Given the extreme rigour of Sagrera in all his works (and this one in particular), this apparent “capriccio” must be justified not only by decorative or formal requirements, but also by the constructive logic of Gothic vaulting system

La catedral de Ávila : evolución constructiva y análisis estructural

Esta tesis se enmarca en el ámbito de la Historia de la Construcción, se estudia la Catedral de Ávila desde un punto de vista técnico, necesario para completar la visión que de esta catedral se tenía. La interpretación de la documentación de archivo, que se encontraba dispersa e inconexa, ha permitido realizar una cronología revisada y completa de las campañas constructivas para el conjunto de la Catedral, desde el siglo XI al XXI. Mediante el análisis de los Contratos de Obra e Informes, se ha puesto de relieve conocimientos de técnicas constructivas medievales. Se plantean dos hipótesis para el orden en el proceso constructivo. En la zona del Cimorro, en relación con la supresión de la tribuna, colocación de los arbotantes y construcción de la fortificación y triple almenado. En el cuerpo de las naves, referida a la posible existencia de una tribuna, colocación del sistema de contrarresto que vemos actualmente y misión del arco entibo del coro. Se ha analizado la estabilidad estructural de la Catedral bajo el marco teórico del Análisis Límite para Estructuras de Fábrica, utilizando la restitución gráfica procedente del levantamiento topográfico realizado. Estos análisis han servido como comprobación de las hipótesis planteadas, por realizarse tanto para la situación actual como para las diferentes campañas constructivas propuestas. Se ha comprobado la validez de las reglas geométricas tradicionales para el análisis de la estructuras de fábrica en los elementos principales de la estructura gótica. Esta tesis incrementa el conocimiento de la historia mecánica del edificio interpretando el funcionamiento mecánico de sus arbotantes, proyectados de forma atípica, y la colocación de los arcos entibo y codales para conseguir la estabilidad del conjunto. La tesis cuenta con un anexo que recopila una extensa documentación gráfica: planimetría, iconografía y fotografía histórica; la trascripción inédita del Contrato de obra para la Capilla de San Segundo y un anexo de cálculo de la zona del Cimorro y del Cuerpo de Naves. This thesis aims to the field of Construction History. The Cathedral of Ávila is studied from a technical point of view, which was necessary to complete the existing knowledge about this Cathedral. The interpretation of archive documentation, which was disperse and unconnected before this work, has allowed the proposal of a revised and complete chronology of the diverse building stages of the Cathedral, dating from the XI century to the XXI century. The analysis of work contracts and of reports has revealed knowledge of medieval construction techniques. Two hypotheses are presented about the order in the construction process. The first hypothesis concerning the destruction of the tribune, the placing of the flying buttress and the building of the fortification and triple system of battlement in the area of the “Cimorro”. The second hypothesis regarding the naves: the possible existence of a tribune, the placing of the system of counterthrust, which can currently be seen, and the function of the “entibo” arch in the choir. The Structural Stability of the Cathedral has been analysed within the theoretical Framework of Limit Analysis to Masonry Structure, by using of the drawing proceeding from our lifting topographical. These analyses have proven the presented hypotheses, since they have been applied to the current situation as well as to the several building stage proposed in the chronology. The validity of the traditional geometric rules for the analysis of the masonry structure in the core elements of Gothic structures has been verified. This thesis increases the knowledge of the mechanical history of the building by interpreting the mechanical working of the flying buttress in an atypical arrangement and the placing of the “entibo” arch and “codal” arch in order to obtain the stability of the monument. The thesis incorporates supplementary material which can be categorized in three groups: 1) extensive graphic documentation (planning, iconography and history photography); 2) the hitherto unknown transcription of the “CONTRATO DE OBRA PARA LA CAPILLA DE SAN SEGUNDO”; 3) an appendix of Analysis of Calculation for the “Cimorro” and the naves.