Effects of coaches' timeouts on basketball teams' offensive and defensive performances according to momentary differences in score and game period.

The aim of the present study was to assess the effects of game timeouts on basketball teams? offensive and defensive performances according to momentary differences in score and game period. The sample consisted of 144 timeouts registered during 18 basketball games randomly selected from the 2007 European Basketball Championship (Spain). For each timeout, five ball possessions were registered before (n?493) and after the timeout (n?475). The offensive and defensive efficiencies were registered across the first 35 min and last 5 min of games. A k-means cluster analysis classified the timeouts according to momentary score status as follows: losing ( ?10 to ?3 points), balanced ( ?2 to 3 points), and winning (4 to 10 points). Repeated-measures analysis of variance identified statistically significant main effects between pre and post timeout offensive and defensive values. Chi-square analysis of game period identified a higher percentage of timeouts called during the last 5 min of a game compared with the first 35 min (64.999.1% vs. 35.1910.3%; x ?5.4, PB0.05). Results showed higher post timeout offensive and defensive performances. No other effect or interaction was found for defensive performances. Offensive performances were better in the last 5 min of games, with the least differences when in balanced situations and greater differences when in winning situations. Results also showed one interaction between timeouts and momentary differences in score, with increased values when in losing and balanced situations but decreased values when in winning situations. Overall, the results suggest that coaches should examine offensive and defensive performances according to game period and differences in score when considering whether to call a timeout.

Evaluación del tiempo de reacción en velocistas con y sin discapacidad auditiva: aplicaciones para la inclusión

Este trabajo de investigación trata de aportar luz al estudio del tiempo de reacción (TR) en velocistas con y sin discapacidad auditiva desde las Ciencias del Deporte. El planteamiento del presente estudio surgió al cuestionarnos la existencia de las diferencias en cuanto al TR visual y auditivo aplicado a velocistas con y sin discapacidad auditiva, pensando en el desarrollo futuro de competiciones inclusivas entre ambos colectivos. Por ello, este estudio trata de resolver las dificultades que los velocistas con discapacidad se encuentran habitualmente en las competiciones. A priori, los atletas con discapacidad auditiva compiten en inferioridad de condiciones como consecuencia de una salida que no parece la más adecuada para ellos (desde los tacos, han de mirar hacia la pistola del juez o el movimiento de un rival). El documento se divide en tres partes. En la primera parte se realiza la pertinente revisión del marco teórico y justificación del estudio. La segunda parte se centra en los objetivos de la investigación, el material y el método, donde se muestran los resultados, discusión y conclusiones del estudio realizado, así como las limitaciones del presente trabajo y sus futuras líneas de investigación. La tercera parte corresponde a la bibliografía y la cuarta parte a los anexos. En la primera parte, presentamos el marco teórico compuesto por cinco capítulos organizan la fundamentación que hemos realizado como revisión sobre los aspectos más destacados del TR, determinado por las características de la tarea y otros factores que influyen en el TR como objeto de nuestro estudio. Después exponemos los principales aspectos estructurales y funcionales del sistema nervioso (SN) relacionados con el TR visual y auditivo. Tras ello se expone la realidad del deporte para personas con discapacidad auditiva, indagando en sus peculiaridades y criterios de elegibilidad que tiene ese colectivo dentro del ámbito deportivo. A continuación abordamos el estudio de la salida de velocidad en el atletismo, como aspecto clave que va a guiar nuestra investigación, especialmente los parámetros determinantes en la colocación de los tacos de salida para atletas con y sin discapacidad auditiva, la posición de salida y la propia colocación de los estímulos en dicha situación. Es la segunda parte se desarrolla el trabajo de investigación que tiene como objetivos estudiar los valores de TR visual simple manual, TR en salida de tacos y los tiempos de desplazamiento a los 10m y 20m de velocistas con y sin discapacidad auditiva, así como analizar las posibles diferencias en TR según posición y tipo de estímulo luminoso, respecto a ambos grupos de atletas. Como tercer objetivo de estudio se evalúa cualitativamente, por parte de los propios atletas, el dispositivo luminoso utilizado. La toma de datos de este estudio se llevó a cabo entre los meses de febrero y mayo del 2014, en el módulo de atletismo del Centro de Alto Rendimiento Joaquín Blume (Madrid), con dos grupos de estudio, uno de 9 velocistas con discapacidad auditiva (VDA), conformando éstos el 60% de toda la población en España, según el número de las licencias de la FEDS en la modalidad de atletismo (velocistas, pruebas de 100 y 200 m.l.), en el momento del estudio, y otro de 13 velocistas sin discapacidad (VsDA) que se presentaron de manera voluntaria con unos mismos criterios de inclusión para ambos grupos. Para la medición y el registro de los datos se utilizaron materiales como hoja de registro, Medidor de Tiempo de Reacción (MTR), tacos de salida, ReacTime®, dispositivo luminoso conectado a los tacos de salida, células fotoeléctricas, ordenador y software del ReacTime, y cámara de video. La metodología utilizada en este estudio fue de tipo correlacional, analizando los resultados del TR simple manual según vía sensitiva (visual y auditiva) entre los dos grupos de VDA y VsDA. También se estudiaron los TR desde la salida de tacos en función de la colocación del dispositivo luminoso (en el suelo y a 5 metros, vía visual) y pistola de salida atlética (vía auditiva) así como el tiempo de desplazamiento a los 10m (t10m) y 20m (t20m) de ambos grupos de velocistas. Finalmente, se desarrolló y llevó a cabo un cuestionario de evaluación por parte de los atletas VDA con el objetivo de conocer el grado de satisfacción después de haber realizado la serie de experimentos con el dispositivo luminoso y adaptado para sistemas de salida en la velocidad atlética. Con el objetivo de comprobar la viabilidad de la metodología descrita y probar en el contexto de análisis real el protocolo experimental, se realizó un estudio piloto con el fin de conocer las posibles diferencias del TR visual desde los tacos de salida en velocistas con discapacidad auditiva, usando para dicha salida un estímulo visual mediante un dispositivo luminoso coordinado con la señal sonora de salida (Soto-Rey, Pérez-Tejero, Rojo-González y Álvarez-Ortiz, 2015). En cuanto a los procedimientos estadísticos utilizados, con el fin de analizar la distribución de los datos y su normalidad, se aplicó la prueba de Kolmogorov-Smirnof, dicha prueba arrojó resultados de normalidad para todas las variables analizadas de las situaciones experimentales EA, EVsuelo y EV5m. Es por ello que en el presente trabajo de investigación se utilizó estadística paramétrica. Como medidas descriptivas, se calcularon el máximo, mínimo, media y la desviación estándar. En relación a las situaciones experimentales, para estudiar las posibles diferencias en las variables estudiadas dentro de cada grupo de velocistas (intragrupo) en la situación experimental 1 (MTR), se empleó una prueba T de Student para muestras independientes. En las situaciones experimentales 2, 3 y 4, para conocer las diferencias entre ambos grupos de velocistas en cada situación, se utilizó igualmente la prueba T para muestras independientes, mientras que un ANOVA simple (con post hoc Bonferroni) se utilizó para analizar las diferencias para cada grupo (VDA y VsDA) por situación experimental. Así mismo, se utilizó un ANOVA de medidas repetidas, donde el tipo de estímulo (situación experimental) fue la variable intra-grupo y el grupo de velocistas participantes (VDA y VsDA) la entre-grupo, realizándose esta prueba para evaluar en cada situación el TR, t1m0 y t20m y las interacciones entre las variables. Para el tratamiento estadístico fue utilizado el paquete estadístico SPSS 18.0 (Chicago, IL, EEUU). Los niveles de significación fueron establecidos para un ≤0.05, indicando el valor de p en cada caso. Uno de los aspectos más relevantes de este trabajo es la medición en diferentes situaciones, con instrumentación distinta y con situaciones experimentales distintas, del TR en velocistas con y sin discapacidad auditiva. Ello supuso el desarrollo de un diseño de investigación que respondió a las necesidades planteadas por los objetivos del estudio, así como el desarrollo de instrumentación específica (Rojo-Lacal, Soto-Rey, Pérez-Tejero y Rojo-González, 2014; Soto-Rey et al., 2015) y distintas situaciones experimentales que reprodujeran las condiciones de práctica y competición real de VsDA y VDA en las pruebas atléticas de velocidad, y más concretamente, en las salidas. El análisis estadístico mostró diferencias significativas entre los estímulos visuales y sonoros medidos con el MTR, siendo menor el TR ante el estímulo visual que ante el sonoro, tanto para los atletas con discapacidad auditiva como para los que no la presentaron (TR visual, 0.195 s ± 0.018 vs 0.197 s ± 0.022, p≤0.05; TR sonoro 0.230 s ± 0.016 vs 0.237 s ± 0.045, p≤0.05). Teniendo en cuenta los resultados según población objeto de estudio y situación experimental, se registraron diferencias significativas entre ambas poblaciones, VDA y VsDA, siendo más rápidos los VDA que VsDA en la situación experimental con el estímulo visual en el suelo (EVsuelo, 0.191 ±0.025 vs 0.210 ±0.025, p≤0.05, respectivamente) y los VsDA en la situación experimental con el estímulo auditivo (EA, 0.396 ±0.045 vs 0.174 ±0.021, p≤0.05), aunque sin diferencias entre ambos grupos en la situación experimental con el estímulo visual a 5m de los tacos de salida. Es de destacar que en el TR no hubo diferencias significativas entre EA para VsDA y EVsuelo para VDA. El ANOVA simple registró diferencias significativas en todas las situaciones experimentales dentro de cada grupo y para todas las variables, por lo que estadísticamente, las situaciones experimentales fueron diferentes entre sí. En relación al de ANOVA medidas repetidas, la prueba de esfericidad se mostró adecuada, existiendo diferencias significativas en las varianzas de los pares de medias: el valor de F indicó que existieron diferencias entre las diferentes situaciones experimentales en cuanto a TR, incluso cuando éstas se relacionaban con el factor discapacidad (factor interacción, p≤0,05). Por ello, queda patente que las situaciones son distintas entre sí, también teniendo en cuenta la discapacidad. El η2 (eta al cuadrado, tamaño del efecto, para la interacción) indica que el 91.7% de la variación se deben a las condiciones del estudio, y no al error (indicador de la generalización de los resultados del estudio). Por otro lado, la evaluación del dispositivo luminoso fue positiva en relación a la iluminación, comodidad de uso, ubicación, color, tamaño, adecuación del dispositivo y del equipamiento necesario para adaptar al sistema de salida. La totalidad de los atletas afirman rotundamente que el dispositivo luminoso favorecería la adaptación al sistema de salida atlética para permitir una competición inclusiva. Asimismo concluyen que el dispositivo luminoso favorecería el rendimiento o mejora de marca en la competición. La discusión de este estudio presenta justificación de las diferencias demostradas que el tipo de estímulo y su colocación son clave en el TR de esta prueba, por lo que podríamos argumentar la necesidad de contar con dispositivos luminosos para VDA a la hora de competir con VsDA en una misma prueba, inclusiva. El presente trabajo de investigación ha demostrado, aplicando el método científico, que el uso de estos dispositivos, en las condiciones técnicas y experimentales indicadas, permite el uso por parte del VDA, usando su mejor TR visual posible, que se muestra similar (ns) al TR auditivo de VsDA, lo que indica que, para competiciones inclusivas, la salida usando el semáforo (para VDA) y la salida habitual (estímulo sonoro) para VsDA, puede ser una solución equitativa en base a la evidencia demostrada en este estudio. De esta manera, y como referencia, indicar que la media de los TR de los velocistas en la final de los 100 m.l. en los Juegos Olímpicos de Londres 2012 fue de 0.162 ±0.015. De esta manera, creemos que estos parámetros sirven de referencia a técnicos deportivos, atletas y futuros trabajos de investigación. Las aplicaciones de este trabajo permitirán modificaciones y reflexiones en forma de apoyo al entrenamiento y la competición para el entrenador, o juez de salida en la competición que, creemos, es necesaria para proporcionar a este colectivo una atención adecuada en las salidas, especialmente en situaciones inclusivas de práctica. ABSTRACT This research aims to study of reaction time (RT) in sprinters with and without hearing impairment from the Sports Science perspective. The approach of this study came asking whether there were differences in the visual and auditory RT applied to sprinters with and without hearing impairment, thinking about the future development of inclusive competition between the two groups. Therefore, this study attempts to resolve the difficulties commonly founded by sprinters with hearing impairments during competitions. A priori, sprinters with hearing impairment would compete in a disadvantage situation as a result of the use of a staring signal not suitable for them (from the blocks, they have to look to the judge´s pistol or the movement of an opponent). The document is divided into three parts. In the first part of the review of relevant theoretical framework and justification of the study is presented. The second part focuses on the research objectives, material and method, where results, discussion and conclusions of the study, as well as the limitations of this study and future research are presented. The third part contains references and the fourth, annexes. In the first part, we present the theoretical framework consisting of five chapters, organizing the state of the art of RT, determined by the characteristics of the task and other factors that influence the RT as object of our study. Then we present the main structural and functional aspects of the nervous system associated with visual and auditory RT. After that, sport for people with hearing disabilities is presented, investigating its peculiarities and eligibility criteria is that group within the deaf sport. Finally, we discuss the theoretical foundation of the study of start speed in athletics as a key aspect that will guide our research, especially the determining parameters in placing the starting blocks for athletes with and without hearing impairment, the starting position and the actual placement of stimuli in such a situation. The second part of the research aims to study the values of simple manual visual RT, RT start from blocks and travel times up to 10m and 20m of sprinters with and without hearing impairment, and to analyze possible differences in RT as position and type of light stimulus with respect to both groups of athletes. The third objective of the study is to assess the pertinence of the lighting device developed and used in the study, in a qualitatively way by athletes themselves. Data collection for this study was carried out between February and May 2014, in the Athletics module at the High Performance Centre Joaquin Blume (Madrid) with the two study groups: 9 sprinters with hearing impairments(VDA, reaching 60% of the population in Spain, according to the number of licenses for athletics at FEDS: sprint, 100 and 200 m.l., at the time of the study), and another 13 sprinters without disability (VsDA) who voluntarily presented themselves, with same inclusion criteria for both groups. For measuring and data collection materials such as recording sheet, gauge reaction time (MTR), starting blocks, ReacTime®, luminous device connected to the starting blocks, photocells, computer and software ReacTime, and video camera were used. The methodology used in this study was correlational, analyzing the results of simple manual RT according sensory pathway (visual and auditory) between the two groups (VsDA and VDA). Also auditory and visual RT was studied depending the placement of the start light signal (on the ground and 5 meters, visual pathway) and athletic start gun signal (auditory pathway, conventional situation) and travel time up to 10m (t10m) and 20m (t20m) for both groups of sprinters. Finally, we developed and carried out an evaluation questionnaire for VDA athletes in order to determine the degree of satisfaction after completing the series of experiments with lighting device and adapted to start systems in athletic speed. In order to test the feasibility of the methodology described and tested in the context of real analysis of the experimental protocol, a pilot study in order to know the possible differences visual RT from the starting blocks in sprinters with hearing impairments was performed, to said output using a visual stimulus coordinated by a lighting device with sound output signal (Soto-Rey Perez-Tejero, Rojo-González y Álvarez-Ortiz, 2015). For the statistical procedures, in order to analyze the distribution of the data and their normality, Kolmogorov-Smirnov test was applied, this test yielded normal results for all variables analyzed during EA, EVsuelo and EV5m experimental situations. Parametric statistics were used in this research. As descriptive measures, the maximum, minimum, mean and standard deviation were calculated. In relation to experimental situations, to study possible differences in the variables studied in each group sprinters (intragroup) in the experimental situation 1 (MTR), a Student t test was used for independent samples. Under the experimental situations 2, 3 and 4, to know the differences between the two groups of sprinters in every situation, the T test for independent samples was used, while a simple ANOVA (with post hoc Bonferroni) was used to analyze differences for each group (VDA and VsDA) by experimental situation. Likewise, a repeated measures ANOVA, where the type of stimulus (experimental situation) was variable intra-group and participants sprinters group (VDA and VsDA) the variable between-group, was performed to assess each situation for RT, t10m and t20m, and also interactions between variables. For the statistical treatment SPSS 18.0 (Chicago, IL, USA) was used. Significance levels were set for  ≤0.05, indicating the value of p in each case. One of the most important aspects of this work is the measurement of RT in sprinters with and without hearing impairment in different situations, with different instrumentation and different experimental situations. This involved the development of a research design that responded to the needs raised by the study aims and the development of specific instrumentation (Rojo-Lacal, Soto-Rey Perez-Tejero and Rojo-Gonzalez, 2014; Soto-Rey et al., 2015) and different experimental situations to reproduce the conditions of practical and real competition VsDA and VDA in athletic sprints, and more specifically, at the start. Statistical analysis showed significant differences between the visual and sound stimuli measured by the MTR, with lower RT to the visual stimulus that for sound, both for athletes with hearing disabilities and for those without (visual RT, 0.195 s ± 0.018 s vs 0.197 ± 0.022, p≤0.05; sound RT 0.230 s ± 0.016 vs 0.237 s ± 0.045, p≤0.05). Considering the results according to study population and experimental situation, significant differences between the two populations, VDA and VsDA were found, being faster the VDA than VsDA in the experimental situation with the visual stimulus on the floor (EVsuelo, recorded 0.191 s ± 0.025 vs 0.210 s ± 0.025, p≤0.05, respectively) and VsDA in the experimental situation with the auditory stimulus (EA, 0.396 s ± 0.045 vs 0.174 s ± 0.021, p≤0.05), but no difference between groups in the experimental situation with the 5m visual stimulus to the starting blocks. It is noteworthy that no significant differences in EA and EVsuelo between VsDA to VDA, respectively, for RT. Simple ANOVA showed significant differences in all experimental situations within each group and for all variables, so statistically, the experimental situations were different. Regarding the repeated measures ANOVA, the sphericity test showed adequate, and there were significant differences in the variances of the pairs of means: the value of F indicated that there were differences between the different experimental situations regarding RT, even when they were related to the disability factor (factor interaction, p≤0.05). Therefore, it is clear that the situations were different from each other, also taking into account impairment. The η2 (eta squared, effect size, for interaction) indicates that 91.7% of the variation is due to the conditions of the study, not by error (as indicator of the generalization potential of the study results). On the other hand, evaluation of the light signal was positively related to lighting, ease of use, location, color, size, alignment device and equipment necessary to adapt the start system. All the athletes claim strongly in favor of the lighting device adaptation system to enable athletic competition inclusive. Also they concluded that light device would enhance performance or would decrease their RT during the competition. The discussion of this study justify the type of stimulus and the start light positioning as key to the RT performance, so that we could argue the need for lighting devices for VDA when competing against VsDA the same competition, inclusive. This research has demonstrated, applying the scientific method, that the use of these devices, techniques and given experimental conditions, allows the use of the VDA, using his best visual RT, shown similar (ns) auditory RT of VsDA, indicating that for inclusive competitions, the start signal using the light (for VDA) and the usual start (sound stimulus) to VsDA can be an equitable solution based on the evidence shown in this study. Thus, and as a reference, indicate that the average of the RT sprinters in the 100 m. final at the 2012 Summer Olympic Games was 0.162 s ± 0.015. Thus, we believe that these parameters become a reference to sports coaches, athletes and future research. Applications of this work will allow modifications and reflections in the form of support for training and competition for the coach, or judge, as we believe is necessary to provide adequate attention to VDA in speed starts, especially in inclusive practice situations.

Análisis del discurso del entrenador de baloncesto experto en competición

En el ámbito de la competición deportiva profesional, el entrenador es una figura clave dentro del equipo y afecta de manera significativa al rendimiento del mismo. El comportamiento del entrenador, las decisiones que tome durante el partido, sus formas, tiempos, etc. afectan a las actuaciones de los jugadores dentro de la pista y suponen un aspecto muy importante a tener en cuenta a la hora de analizar el rendimiento de los equipos en una competición. Los condicionantes de la competición, la urgencia en las decisiones, la incertidumbre de su cumplimiento, etc., afectan a su conducta verbal. Por tanto, debemos conocer algunos de los comportamientos que resultan más eficaces por parte del entrenador para conseguir el mayor rendimiento de su equipo durante el partido y a partir de ahí tratar de construir un modelo teórico sobre que requisitos debería cumplir esta conducta verbal, ya que creemos que es a través del análisis de la observación de una conducta en una situación real como se pueden establecer estos parámetros teóricos sobre la comunicación. Para ello realizamos un estudio de 6 casos de entrenadores expertos en los que observamos su comportamiento verbal durante 4 partidos para extraer una información que comparada con los estudios previos, determine si es posible o no, establecer un modelo mínimo común de comportamiento eficaz en competición. En cuanto al objeto de la observación en el estudio de los casos nos hemos centrado en el contenido de la información, el que, su significado y sólo de tipo verbal, ya que consideramos la comunicación no verbal como algo más sujeto a posibles interpretaciones, aspecto que no estudiamos. ABSTRACT In the area of the sports professional competition, the coach is a key figure inside the team and concerns in a significant way the performance of the same one. The behavior of the coach, the decisions that it takes during the game, his forms, times, etc. They concern the actions of the players inside the track and suppose a very important aspect to bear in mind at the moment of analyzing the performance of the teams in a competition. The determining ones of the competition, the urgency in the decisions, the uncertainty of his fulfillment, etc., they concern his verbal behavior. Therefore, we must know some of the behaviors that turn out to be more effective on the part of the coach to obtain the best performance of his team during the game and from there tries to construct a theoretical model on whom requirements it should fulfill this verbal behavior, since we believe that it is across the analysis of the observation of a conduct in a true situation since these theoretical parameters can be established on the communication. For it we realize a study of 6 cases of expert coaches in that we observe his verbal behavior during 4 games to extract information that compared with the previous studies, it determines if it is possible or not, establishes a minimal common model of effective behavior in competition. As for the object of the observation in the study of the cases we have centered on the content of the information, the fact that, his meaning and only of verbal type, since we consider the not verbal communication as slightly more subject to possible interpretations, aspect that we do not study.

The analysis of the basketball coach speech during the moments of game and pause in relation to the performance in competition

In the area of the professional competition, the coach is a fundamental part in the management of a team and more concretely in the game planning. During the competition, the management of the times of pause and times out as well as the conduct of the coach during the same ones is an aspect to analyze in the sports performance. It is for this that it becomes necessary to know some of the behaviors that turn out to be more frequent by the coach and that are more related to a positive performance of his players. For it there has been realized a study of 7 cases of expert coaches in those that his verbal behavior has observed during 4 games. It has focused on the content of the information only to verbal level, on his meaning. The information that have been obtained in the study shows a major quantity of information elaborated during the pauses of the games and a major tactical content with regard to the moments of game. On the other hand, a relation exists between a major number of questions and a minor number of psychological instructions when the score is adverse, whereas in case of victory, a direct relation does not exist with any category. The rest of categories of the speech do not meet influenced directly for the result, for what it is not possible to consider a direct and immediate relation between the coach verbal behavior during the pauses and the result of the game, except in punctual moments.

Ball possession effectiveness in men's and women's elite basketball according to situational variables in different game periods

The aim of the present study was to identify the importance of floorball tactical variables to predict ball possession effectiveness, when controlling quality of opposition and game periods. The sample was composed by 1500 ball possessions, corresponding to 14 games randomly selected from the International Championships played during 2008 and 2010 (World Championship, Four nations tournament and classificatory phases for World Championship) by teams from different competition levels (HIGH, INTERMEDIATE and LOW). The effects of the predictor variables on successful ball possessions according to the three game contexts (HIGH vs. HIGH; HIGH vs. LOW; LOW vs. LOW games) were analyzed using Binomial Logistic Regressions. The results showed no interaction with the game period. In HIGH vs. HIGH games, quality of opposition showed an association with ball possession effectiveness with ending zone, offensive system, possession duration, height of shooting and defensive pressures previous to the shot. In HIGH vs. LOW games the important factors were the starting zone, possession duration, defensive pressure previous to the last pass and to the shot, technique of shooting and the number players involved in each ball possession. Finally, in LOW vs. LOW games, the results emphasized the importance of starting and ending zones, the number of passes used and the technique of shooting. In conclusion, elite floorball performance is mainly affected by quality of opposition showing different game patterns in each context that should be considered by coaches when preparing practices and competitions.

Anabolic drugs consumption of high school students participating in school championships of physical education

This paper aims to analyse the use of anabolic drugs among Greek students participating in school championships of physical education (PE). In order to do it, a survey was conducted during the 2008 to 2009 academic year in suburban, urban and metropolitan areas in Greece. The sample was 2,535 high school students from the 10 to 12th grade, participating in the school physical education championships. The results showed that 9.6% of boys and 3.7% of girls reported that they had used anabolic drugs sometime in the past whereas 11.2% boys and 4.8% girls reported that they would intend to use them in the future. This confirms that anabolic steroids are an important problem among adolescents, and educational programs should increase their knowledge about these drugs. Information should come not only from the state, but also from coaches, teachers, trainers and parents.

New tool to assess the force production in the swallow

8 men artistic gymnasts were evaluated with a new test protocol in order to assess isometric strength in an specific hold position on still rings. The proposed test protocol measures the force applied the gymnast on the rings from an initial lying prone position on a force platform while he is trying to achieve the Swallow (or Hirondelle) position. The vertical force (FZ) from the forcetime curve registered (100 Hz) was used and it showed a descent from the initial body weight level caused by the gymnast force on the rings and, later, a maximal isometric force period. Fundamental and derivate variables to extract from the evolution of Fz were defined. Results showed significant statistical differences between gymnasts that could perform the Swallow (P) from those that could not (NP) (pmenor que0.05). Performer gymnasts were characterized by a higher percentage of body weight descent and higher strength in relation to body mass (pmenor que0.05). The practical application of this tool could be to provide coaches with information about how close the gymnast is to perform the Swallow.

Métodos numéricos y estadísticos de caracterización de uniones tubulares soldadas para su aplicación en modelos de elementos finitos de estructuras de vehículos

El análisis de estructuras mediante modelos de elementos finitos representa una de las metodologías más utilizadas y aceptadas en la industria moderna. Para el análisis de estructuras tubulares de grandes dimensiones similares a las sobrestructuras de autobuses y autocares, los elementos de tipo viga son comúnmente utilizados y recomendados debido a que permiten obtener resultados satisfactorios con recursos computacionales reducidos. No obstante, los elementos de tipo viga presentan importante desventaja ya que las uniones modeladas presentan un comportamiento infinitamente rígido, esto determina un comportamiento mas rígido en las estructuras modeladas lo que se traduce en fuentes de error para las simulaciones estructurales (hasta un 60%). Mediante el modelado de uniones tubulares utilizando elementos de tipo área o volumen, se pueden obtener modelos más realistas, ya que las características topológicas de la unión propiamente dicha pueden ser reproducidas con un mayor nivel de detalle. Evitándose de esta manera los inconvenientes de los elementos de tipo viga. A pesar de esto, la modelización de estructuras tubulares de grandes dimensiones con elementos de tipo área o volumen representa una alternativa poco atractiva debido a la complejidad del proceso de modelados y al gran número de elementos resultantes lo que implica la necesidad de grandes recursos computacionales. El principal objetivo del trabajo de investigación presentado, fue el de obtener un nuevo tipo de elemento capaz de proporcionar estimaciones más exactas en el comportamiento de las uniones modeladas, al mismo tiempo manteniendo la simplicidad del procesos de modelado propio de los elementos de tipo viga regular. Con el fin de alcanzar los objetivos planteados, fueron realizadas diferentes metodologías e investigaciones. En base a las investigaciones realizadas, se obtuvo un modelo de unión viga alternativa en el cual se introdujeron un total seis elementos elásticos al nivel de la unión mediante los cuales es posible adaptar el comportamiento local de la misma. Adicionalmente, para la estimación de las rigideces correspondientes a los elementos elásticos se desarrollaron dos metodologías, una primera basada en la caracterización del comportamiento estático de uniones simples y una segunda basada en la caracterización del comportamiento dinámico a través de análisis modales. Las mejoras obtenidas mediante la implementación del modelo de unión alternativa fueron analizadas mediante simulaciones y validación experimental en una estructura tubular compleja representativa de sobrestructuras de autobuses y autocares. En base a los análisis comparativos realizados con la uniones simples modeladas y los experimentos de validación, se determinó que las uniones modeladas con elementos de tipo viga son entre un 5-60% más rígidas que uniones equivalentes modeladas con elementos área o volumen. También se determinó que las uniones área y volumen modeladas son entre un 5 a un 10% mas rígidas en comparación a uniones reales fabricadas. En los análisis realizados en la estructura tubular compleja, se obtuvieron mejoras importantes mediante la implementación del modelo de unión alternativa, las estimaciones del modelo viga se mejoraron desde un 49% hasta aproximadamente un 14%. ABSTRACT The analysis of structures with finite elements models represents one of the most utilized an accepted technique in the modern industry. For the analysis of large tubular structures similar to buses and coaches upper structures, beam type elements are utilized and recommended due to the fact that these elements provide satisfactory results at relatively reduced computational performances. However, the beam type elements have a main disadvantage determined by the fact that the modeled joints have an infinite rigid behavior, this shortcoming determines a stiffer behavior of the modeled structures which translates into error sources for the structural simulations (up to 60%). By modeling tubular junctions with shell and volume elements, more realistic models can be obtained, because the topological characteristics of the junction at the joint level can be reproduced more accurately. This way, the shortcoming that the beam type elements present can be solved. Despite this fact, modeling large tubular structures with shell or volume type elements represents an unattractive alternative due to the complexity of the modeling process and the large number of elements that result which imply the necessity of vast computational performances. The main objective of the research presented in this thesis was to develop a new beam type element that would be able to provide more accurate estimations for the local behavior of the modeled junctions at the same time maintaining the simplicity of the modeling process the regular beam type elements have. In order to reach the established objectives of the research activities, a series of different methodologies and investigations have been necessary. From these investigations an alternative beam T-junction model was obtained, in which a total of six elastic elements at the joint level were introduced, the elastic elements allowed us to adapt the local behavior of the modeled junctions. Additionally, for the estimation of the stiffness values corresponding to the elastic elements two methodologies were developed, one based on the T-junction’s static behavior and a second one based on the T-junction’s dynamic behavior by means of modal analysis. The improvements achieved throughout the implementation of this alternative T-junction model were analyzed though mechanical validation in a complex tubular structures that had a representative configuration for buses and coaches upper structures. From the comparative analyses of the finite element modeled T-junctions and mechanical experimental analysis, was determined that the beam type modeled T-junctions have a stiffer behavior compared to equivalent shell and volume modeled T-junctions with average differences ranging from 5-60% based on the profile configurations. It was also determined that the shell and volume models have a stiffer behavior compared to real T-junctions varying from 5 to 10% depending on the profile configurations. Based on the analysis of the complex tubular structure, significant improvements were obtained by the implementation of the alternative beam T-junction model, the model estimations were improved from a 49% to approximately 14%.

Qualitative analysis of critical moments in basketball

The aim of this paper was to know the coach point of view about the critical moment concept in basketball. The methodology used in our research is a qualitative methodology. The instrument used to obtain the data was the semi- structured interviews. There were interviewed 12 ACB league coaches during the 2011/12 season. Results show that incertitude is associated to the critical moment concept. Last minutes of close games and also overtime are identified as critical moment of the game. There is nott any variable in statistics considered by all coaches to determine the critical moment, and they were agree that respecting some game rules is basic to face up the critical moment.

Self perception of decision making competence in spanish football players

Background: It is known that competence to make decisions is a fundamental aspect of sport competition. Objective: This study has analyzed the decision profile of a sample of Spanish football players of different levels of expertise. Methods: 690 Spanish football players of national and international level completed the decision making questionnaire, which cover three dimensions ? perceived decision competence, decision anxiety and commitment with decision learning. MANCOVA and ANOVA analysis were carried out to analyse the differences in each dimension based on the level of expertise. Results: Results showed that perception of decision making competence increased and the anxiety decreased with the level of expertise. Conclusions: This study confirmed the usefulness of this questionnaire in the process of training for coaches and sport psychologists.

Performance profiles of football teams in the UEFA Champions League considering situational efficiency

Performance of football teams varies constantly due to the dynamic nature of this sport, whilst the typical performance and its spread can be represented by profiles combining different performance-related variables based on data from multiple matches. The current study aims to use a profiling technique to evaluate and compare match performance of football teams in the UEFA Champions League incorporating three situational variables (i.e. strength of team and opponent, match outcome and match location). Match statistics of 72 teams, 496 games across four seasons (2008-09 to 2012-13) of this competition were analysed. Sixteen performance-related events were included: shots, shots on target, shots from open play, shots from set piece, shots from counter attack, passes, pass accuracy (%), crosses, through balls, corners, dribbles, possession, aerial success (%), fouls, tackles, and yellow cards. Teams were classified into three levels of strength by a k-cluster analysis. Profiles of overall performance and profiles incorporating three situational variables for teams of all three levels of strength were set up by presenting the mean, standard deviation, median, lower and upper quartiles of the counts of each event to represent their typical performances and spreads. Means were compared by using one-way ANOVA and independent sample t test (for match location, home and away differences), and were plotted into the same radar charts after unifying all the event counts by standardised score. Established profiles can present straightforwardly typical performances of football teams of different levels playing in different situations, which could provide detailed references for coaches and analysts to evaluate performances of upcoming opposition and of their own.

Nutritional intake and body composition of adolescent soccer player of two different levels of performance: a comparative study

Soccer participation worldwide is increasing and every club try to discover new talents. It is well know that there is an important correlation between body composition (BC) and talent detection (TD) and when coaches and selectors choose players, they tend to choose them with optimum BC.

Self-perceptions of decision making competence in Spanish football players

Background: It is known that competence to make decisions is a fundamental aspect of sport competition. Objective: This study has analyzed the decision profile of a sample of Spanish football players of different levels of expertise. Methods: 690 Spanish football players of national and international level completed the decision mak- ing questionnaire, which cover three dimensions ? perceived decision competence, decision anxiety and commit- ment with decision learning. MANCOVA and ANOVA analysis were carried out to analyse the differences in each dimension based on the level of expertise. Results: Results showed that perception of decision making competence increased and the anxiety decreased with the level of expertise. Conclusions: This study confirmed the usefulness of this questionnaire in the process of training for coaches and sport psychologists.

Análisis cuantitativo y cualitativo de los momentos críticos en baloncesto = Quantitative and qualitative analysis of the critical moments in basketball

El MC en baloncesto es aquel fenómeno relacionado con el juego que presenta unas características particulares determinadas por la idiosincrasia de un equipo y puede afectar a los protagonistas y por ende al devenir del juego. En la presente Tesis se ha estudiado la incidencia del MC en Liga A.C.B. de baloncesto y para su desarrollo en profundidad se ha planteado dos investigaciones una cuantitativa y otra cualitativa cuya metodología se detalla a continuación: La investigación cuantitativa se ha basado en la técnica de estudio del “Performance analysis”, para ello se han estudiado cuatro temporadas de la Liga A.C.B. (del 2007/08 al 2010/11), tal y como refleja en la bibliografía consultada se han tomado como momentos críticos del juego a los últimos cinco minutos de partidos donde la diferencia de puntos fue de seis puntos y todos los Tiempos Extras disputados, de tal manera que se han estudiado 197 momentos críticos. La contextualización del estudio se ha hecho en función de la variables situacionales “game location” (local o visitante), “team quality” (mejores o peores clasificados) y “competition” (fases de LR y Playoff). Para la interpretación de los resultados se han realizado los siguientes análisis descriptivos: 1) Análisis Discriminante, 2) Regresión Lineal Múltiple; y 3) Análisis del Modelo Lineal General Multivariante. La investigación cualitativa se ha basado en la técnica de investigación de la entrevista semiestructurada. Se entrevistaron a 12 entrenadores que militaban en la Liga A.C.B. durante la temporada 2011/12, cuyo objetivo ha sido conocer el punto de vista que tiene el entrenador sobre el concepto del MC y que de esta forma pudiera dar un enfoque más práctico basado en su conocimiento y experiencia acerca de cómo actuar ante el MC en el baloncesto. Los resultados de ambas investigaciones coinciden en señalar la importancia del MC sobre el resultado final del juego. De igual forma, el concepto en sí entraña una gran complejidad por lo que se considera fundamental la visión científica de la observación del juego y la percepción subjetiva que presenta el entrenador ante el fenómeno, para la cual los aspectos psicológicos de sus protagonistas (jugadores y entrenadores) son determinantes. ABSTRACT The Critical Moment (CM) in basketball is a related phenomenon with the game that has particular features determined by the idiosyncrasies of a team and can affect the players and therefore the future of the game. In this Thesis we have studied the impact of CM in the A.C.B. League and from a profound development two investigations have been raised, quantitative and qualitative whose methodology is as follows: The quantitative research is based on the technique of study "Performance analysis", for this we have studied four seasons in the A.C.B. League (2007/08 to 2010/11), and as reflected in the literature the Critical Moments of the games were taken from the last five minutes of games where the point spread was six points and all overtimes disputed, such that 197 critical moments have been studied. The contextualization of the study has been based on the situational variables "game location" (home or away), "team quality" (better or lower classified) and "competition" (LR and Playoff phases). For the interpretation of the results the following descriptive analyzes were performed: 1) Discriminant Analysis, 2) Multiple Linear Regression Analysis; and 3) Analysis of Multivariate General Linear Model. Qualitative research is based on the technique of investigation of a semi-structured interview. 12 coaches who belonged to the A.C.B. League were interviewed in seasons 2011/12, which aimed to determine the point of view that the coach has on the CM concept and thus could give a more practical approach based on their knowledge and experience about how to deal with the CM in basketball. The results of both studies agree on the importance of the CM on the final outcome of the game. Similarly, the concept itself is highly complex so the scientific view of the observation of the game is considered essential as well as the subjective perception the coach presents before the phenomenon, for which the psychological aspects of their characters (players and coaches) are crucial.

Evaluación teórico experimental de la influencia de espumas de relleno metálicas como elementos de absorción de energía en perfiles tubulares de pequeño espesor. Su aplicación a vehículos para el transporte colectivo de personas

Los accidentes con implicación de autocares en los que se producen vuelcos ponen de manifiesto la especial agresividad de los mismos, como lo confirman las estadísticas. Como medida para mejorar la seguridad de los Vehículos de Grandes Dimensiones para el Transporte de Pasajeros (V.G.D.T.P.) frente a vuelco fue aprobado por las Naciones Unidas el Reglamento Nº 66 de Ginebra. Este reglamento establece los requisitos mínimos que las estructuras de los vehículos de grandes dimensiones deben cumplir con respecto a vuelco. El reglamento 66 ha supuesto un paso adelante muy importante en relación con la seguridad de los autocares, puesto que especifica por primera vez requerimientos estructurales a este tipo de vehículos, y en general ha supuesto una mejora del vehículo . Por otro lado, a consecuencia de la obligatoriedad de instalación de cinturones de seguridad, existe una unión entre pasajeros y vehículo, pero como no se trata de una unión rígida, hay que contemplar el porcentaje de la masa de los ocupantes que influye en la absorción de energía de la estructura. Además la retención de los ocupantes con cinturones de seguridad influye en la energía a absorber por la estructura del vehículo en dos aspectos, por un lado aumenta la masa del vehículo y en el otro se incrementa la altura el centro de gravedad. Esta situación a conducido a elaborar por parte de las Naciones Unidas la revisión 01 del Reglamento 66, en el que se considera que el 50 % de la masa total de los pasajeros posee una unión rígida con la estructura del vehículo, y por lo tanto debe ser tenida en cuenta si el vehículo posee sistemas de retención. En la situación actual, con limitaciones de peso del vehículo y peso por eje, los elementos de confort, seguridad y espacio para maleteros contribuyen a aumentar el peso del vehículo. Esto unido a la dificultad de introducción de cambios radicales en la concepción actual de fabricación de este tipo de vehículos por suponer unas pérdidas importantes para los fabricantes existentes, tanto en su conocimiento del producto como en su metodología de proceso, conlleva la necesidad cada vez más agobiante de analizar y evaluar otras alternativas estructurales que sin suponer grandes revoluciones a los productos actualmente en fabricación los complementen permitiendo adaptarse a los nuevos requerimientos en seguridad. Recientes desarrollos en la relación costo-beneficio de los procesos para la producción de materiales celulares metálicos de baja densidad, tales como las espumas metálicas, los posiciona como una alternativa de especial interés para la aplicación como elementos de absorción de energía para reforzar estructuras. El relleno con espumas metálicas puede ser más eficiente en términos de optimización de peso comparado con el aumento de espesor de los perfiles estructurales, dado que la absorción de energía se produce en una fracción relativamente pequeña de los perfiles, en las denominadas rótulas plásticas. La aplicación de espumas de relleno metálicas en estructuras de vehículos se está empezando a emplear en determinadas zonas de los vehículos de turismo, siendo totalmente novedosa cualquier intento de aplicación en estructuras de autobuses y autocares. Conforme a lo expuesto, y con el objeto de resolver estos problemas, se ha elaborado el presente trabajo de tesis doctoral, cuyos objetivos son: -Desarrollar un modelo matemático, que permita simular el ensayo de vuelco, considerando la influencia de los ocupantes retenidos con cinturones de seguridad para evaluar su influencia en la absorción de energía de la estructura. -Validar el modelo matemático de vuelco de la estructura mediante ensayos de secciones representativas de la estructura del vehículo y mediante el ensayo de un vehículo completo. -Realizar un estudio de las propiedades de las espumas metálicas que permitan incorporarlas como elemento de absorción de energía en el relleno de componentes de la superestructura de autobuses y autocares. -Desarrollar un modelo matemático para evaluar el aporte del relleno de espuma metálica en la absorción de energía ante solicitaciones por flexión estática y dinámica en componentes de la superestructura de autobuses o autocares. -Realizar un programa de ensayos a flexión estáticos y dinámicos para validar el modelo matemático del aporte del relleno de espuma metálica sobre componentes de la superestructura de autobuses y autocares. . -Incorporar al modelo matemático de vuelco de la estructura, los resultados obtenidos sobre componentes con relleno de espuma metálica, para evaluar el aporte en la absorción de energía. -Validar el modelo de vuelco de la estructura del autobús o autocar con relleno de espuma metálica, mediante ensayos de secciones de carrocería. ABSTRACT Accidents involving buses in which rollovers occur reveal the special aggressiveness thereof, as the statistics prove. As a measure to improve the safety of large vehicles for the transport of passengers to rollover, Regulation 66 of Geneva was approved by the United Nations. This regulation establishes the minimum requirements that structures of large vehicles must comply with respect to rollovers. The regulation 66 has been a major step forward in relation to the safety of coaches, since it specifies structural requirements to such vehicles and has been an improvement for the vehicle. In turn, as a result of compulsory installation of safety belts, there is contact between passengers and vehicle, but as it is not a rigid connection we must contemplate the percentage of the mass of the occupants that impacts on the energy absorption of the structure. Thus, the passengers’ restraining modifies the energy to absorb by the vehicle in two different aspects: On the one hand, it increases the vehicle weight and on the other the height of the center of gravity. This circumstance has taken the United Nations to elaborate Revision 01 of Regulation 66, in which it is considered that the 50 percent of passengers’ mass has a rigid joint together with the vehicle structure and, therefore, the passengers’ mass mentioned above should be highly considered if the vehicle has seat belts. In the present situation, in which limitations in vehicle weight and weight in axles are stricter, elements of comfort, safety and space for baggage are contributing to increase the weight of the vehicle. This coupled with the difficulty of introducing radical changes in the current conception of manufacturing such vehicles pose significant losses for existing manufacturers, both in product knowledge and process methodology, entails the overwhelming need to analyze and evaluate other structural alternatives without assuming relevant modifications on the products manufactured currently allowing them to adapt to the new safety requirements. Recent developments in cost-benefit processes for the production of metallic foams of low density, such as metal foams, place them as an alternative of special interest to be used as energy absorbers to strengthen structures. The filling with metal foams can be more efficient in terms of weight optimization compared with increasing thickness of the structural beams, since the energy absorption occurs in a relatively small fraction of the beams, called plastic hinges. The application of metal filling foams in vehicle structures is beginning to be used in certain areas of passenger cars, being an innovative opportunity in structures for application in buses and coaches. According to the mentioned before, and in order to come forward with a solution, this doctoral thesis has been prepared and its objectives are: - Develop a mathematical model to simulate the rollover test, considering the influence of the occupants held with seat belts to assess their influence on energy absorption structure. - Validate the mathematical model of the structure rollover by testing representative sections of the vehicle structure and by testing a complete vehicle. - Conduct a study of the properties of metal foams as possible incorporation of energy absorbing element in the filler component of the superstructure of buses and coaches. - Elaborate a mathematical model to assess the contribution of the metal foam filling in absorbing energy for static and dynamic bending loads on the components of buses or coaches superstructure. - Conduct a static and dynamic bending test program to validate the mathematical model of contribution of metal foam filling on components of the superstructure of buses and coaches bending. - To incorporate into the mathematical model of structure rollover, the results obtained on components filled with metal foam, to evaluate the contribution to the energy absorption. - Validate the rollover model structure of the bus or coach filled with metal foam through tests of bay sections. The objectives in this thesis have been achieved successfully. The contribution calculation model with metal foam filling in the vehicle structure has revealed that the filling with metal foam is more efficient than increasing thickness of the beams, as demonstrated in the experimental validation of bay sections.