Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Benchmarking of calculation schemes in Apollo2 and COBAYA3 for VVER lattices

This paper presents solutions of the NURISP VVER lattice benchmark using APOLLO2, TRIPOLI4 and COBAYA3 pin-by-pin. The main objective is to validate MOC based calculation schemes for pin-by-pin cross-section generation with APOLLO2 against TRIPOLI4 reference results. A specific objective is to test the APOLLO2 generated cross-sections and interface discontinuity factors in COBAYA3 pin-by-pin calculations with unstructured mesh. The VVER-1000 core consists of large hexagonal assemblies with 2mm inter-assembly water gaps which require the use of unstructured meshes in the pin-by-pin core simulators. The considered 2D benchmark problems include 19-pin clusters, fuel assemblies and 7-assembly clusters. APOLLO2 calculation schemes with the step characteristic method (MOC) and the higher-order Linear Surface MOC have been tested. The comparison of APOLLO2 vs.TRIPOLI4 results shows a very close agreement. The 3D lattice solver in COBAYA3 uses transport corrected multi-group diffusion approximation with interface discontinuity factors of GET or Black Box Homogenization type. The COBAYA3 pin-by-pin results in 2, 4 and 8 energy groups are close to the reference solutions when using side-dependent interface discontinuity factors.

Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing

Laser shock processing (LSP) is being increasingly applied as an effective technology for the improvement of metallic materials mechanical and surface properties in different types of components as a means of enhancement of their corrosion and fatigue life behavior. As reported in previous contributions by the authors, a main effect resulting from the application of the LSP technique consists on the generation of relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Additional results accomplished by the authors in the line of practical development of the LSP technique at an experimental level (aiming its integral assessment from an interrelated theoretical and experimental point of view) are presented in this paper. Concretely, follow-on experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (especially Al and Ti alloys characteristic of high reliability components in the aerospace, nuclear and biomedical sectors) under different LSP irradiation conditions are presented along with a practical correlated analysis on the protective character of the residual stress profiles obtained under different irradiation strategies. Additional remarks on the improved character of the LSP technique over the traditional “shot peening” technique in what concerns depth of induced compressive residual stresses fields are also made through the paper

Técnicas y materiales de la construcción fortificada altomedieval en el centro de la Península Ibérica: métodos de análisis a través de la arqueología y la historia de la construcción

Esta tesis doctoral tiene como objeto el acercamiento histórico-constructivo a la realidad material de las fortificaciones edificadas en el centro de la Península Ibérica durante los primeros siglos de la Edad Media. El marco geográfico se extiende desde el cauce del río Duero, delimitado por los valles de sus afluentes, el Duratón, al oeste, y el Escalote al este, hasta las cumbres del Sistema Central oriental en su entronque con el Ibérico, para descender por la falda sur de la sierra hasta los valles altos del Lozoya, Jarama y Henares. Siguiendo las demarcaciones actuales, el marco de estudio ocupa parcialmente las provincias de Soria, Guadalajara, Madrid, Segovia, Burgos y Valladolid. Desde un punto de vista cronológico, el espacio temporal se inicia con la conquista musulmana de la Península Ibérica de 711 y culmina con la incorporación definitiva al reino de Castilla de las zonas estudiadas, en torno al año 1150. Se trata de un espacio de transición, tanto desde el punto de vista social como ecológico. Los territorios al sur de la sierra correspondían a los confines septentrionales de la Marca Media de al-Andalus, mientras que la falta norte, los extrema durii, fueron un territorio escasamente poblado y desorganizado, foco de la expansión de los reinos de León y Castilla y zona de conflicto con al-Andalus a principios del siglo X. Un territorio tan amplio y heterogéneo, unido a una compleja evolución histórica y social y la parquedad de las fuentes escritas, ha necesitado de un acercamiento con una metodología de tipo mixto, en la que han convergido las técnicas propias de la documentación histórica, de la arqueología y de la historia de la construcción. Esta metodología parte de un exhaustivo vaciado bibliográfico, tras lo cual se planteó una prospección arqueológica dirigida que permitió realizar un catálogo de elementos fortificados en el área de estudio susceptibles de contener fases altomedievales. Sobre cada uno de los elementos localizados se realizó una toma de datos de tipo gráfico métrico y constructivo. Cruzando los datos recabados en cada edificio con técnicas propias de la estratigrafía e historia de la construcción se identificaron y aislaron las fases de la cronología analizada. Entre las fortificaciones que evidenciaron fases altomedievales y atendiendo a su singularidad, representatividad y calidad estratigráfica se ha profundizado en el análisis de nueve casos de estudio: el conjunto fortificado de Atienza, el castillo de Cogolludo, el recinto amurallado de Buitrago de Lozoya, el castillo de Caracena, la iglesia parroquial de la Inmaculada Concepción de Mezquetillas, la alcazaba de Gormaz, la torre de San Andrés de Sepúlveda, la iglesia parroquial de San Miguel de Ayllón y la fortificación rupestre de Alcolea de las Peñas. La investigación ha servido para dos fines principales. El primero se centra en el aspecto material. En este sentido no solo se ha identificado la presencia o ausencia de fases altomedievales en cado uno de los edificio lo que ha permitido realizar una lectura territorial, la caracterización de las diferentes técnicas y materiales constructivos y valorar la posibilidad de establecer una cronotipología. El segundo se centra en aspectos históricos y sociales. La vinculación de estos restos materiales con la documentación histórica ha devenido en un medio para conocer la historia de las gentes que construyeron estos edificios, la motivación que les llevó a emprender tales proyectos, así como el contexto en el que cada una de estas fortificaciones desempeñó las funciones para las que fue creada. Este estudio ha puesto de manifiesto la ruptura que supuso la ocupación estatal de esta zona por parte del ejército cordobés desde mediados del siglo X, tanto desde el punto de vista social como constructivo. Se ha podido documentar materialmente esta ocupación tras la restauración de Medinaceli, en torno a 946, y la sucedida tras la toma de Sepúlveda por parte de Almanzor en 984, diferenciándose claramente las técnicas constructivas propias de este momento, ejecutadas directamente por talleres foráneos, procedentes de Córdoba y Toledo. La posición estratigráfica de estas fábricas diagnósticas ha permito identificar fases constructivas inmediatamente anteriores y posteriores a este momento. También se ha podido comprobar la hipótesis inicial en relación a la pérdida de conocimientos constructivos durante el final de la Antigüedad y los primeros siglos del medievo en la zona estudiada. La sillería y la explotación de canteras, así como el ciclo productivo del ladrillo por completo, son recuperados sin recurrir a un sustrato tecnológico local, propiciados de manera efímera por la ocupación califal. Cuando se produce el desmembramiento del califato a partir del año 1010 estas técnicas se vuelven a abandonar. A finales del siglo XI y principios del siglo XII se produce un nuevo cambio en la construcción, recuperándose de nuevo estas técnicas de la mano del románico y del establecimiento de la red parroquial diocesana. En una zona y periodo histórico apenas explotado por la investigación, esta tesis doctoral busca no solo establecer una metodología de trabajo sino sentar las bases para futuros estudios, tanto desde el punto de vista particular, profundizando en el estudio constructivo y estratigráfico de cada uno de los elementos recogidos, como en otros aspectos más trasversales. ABSTRACT This doctoral thesis has a constructive historical material approach to the reality of the fortifications built in the center of the Iberian Peninsula during the first centuries of the middle Ages. The geographical framework extends from the Duero´s riverbed, bounded by the valleys of its tributaries, the Duratón on the west, and the Escalote on the east, until to the peaks of the eastern Central System at its connection with the Iberian, to descend the hillside of the mountain range to the high valleys of Lozoya, Jarama and Henares. Following the current demarcations under this framework study, partially cover the provinces of Soria, Guadalajara, Madrid, Segovia, Burgos and Valladolid. From a chronological point of view, the temporal space began with the Muslim conquest of the Iberian Peninsula in 711 A.D and ends with the final incorporation into the Kingdom of Castile in the studied areas, around the year 1150 A.D. It is a transitional gathering point, both socially and ecologically. The southern territories of the Sierra or mountain range corresponded to the northern boundaries of the Middle mark of al- Andalus , while the northern missing, the extrema Durii , were a disorganized sparsely populated territory and point of the expansion of the kingdoms of Leon and Castile and zone of conflict with al- Andalus at the beginning of the tenth century. Such a wide and diverse territory, connected with a complex historical, social evolution and the lack of written sources , has required an approach with a mixed type methodology, which have converged the techniques of historical documentation of the archeology and building history. This methodology comes from a comprehensive bibliographic study, after which an archaeological survey was directed that allowed building a fortified elements ‘catalog in the study area likely to contain high medieval period phases were raised. On each of the elements located one metric data collection and constructive graphic type was performed. Checking against the data collected in each building with its own history of stratigraphy and construction techniques and finally, they were identified and isolated the timing analysis phases. Among the early medieval fortifications that showed high period Medieval phases and according to its uniqueness , representativeness and stratigraphy’s quality of the nine case studies : the fortified complex of Atienza, Cogolludo Castle, the Buitrago de Lozoya´s walled enclosure , the Caracena´s castle , the Mezquetillas´ parish church, the Gormaz´s fortress, the San Andres toser in Sepulveda, the church of San Miguel de Ayllón and the Alcolea de las Peñas´ rock fortress. This research study has served two main purposes. The first focuses on the material side. In this sense it does not only identified the presence or absence of early medieval period phases in each one of the building, which has allowed a territorial reading and the characterization of the different construction techniques and materials, but it also assess the possibility of establishing a chrono–typology. The second focuses on historical and social aspects. The bound of these materials remains with the historical documentation has become a means to know the history of the people who built these buildings, the motivation that led them to undertake such projects as well as the context in which each of these fortifications played the functions for which it was created. This study has revealed the breach that led to the state occupation of the Cordovan army in this area by since mid-tenth century, from the social point of view and also from the structural one. It has been materially document this occupation after the restoration of Medinaceli, around 946, and succeeded after taking Sepulveda by Almanzor in 984, clearly differentiating their own building techniques currently implemented directly by foreign workshops, from Cordova and Toledo. The stratigraphic position of these factories has made it possible to identify earlier and later construction phases at this time. It has also been able to verify the initial hypothesis in relation with constructive knowledge loss during late antiquity and early medieval centuries in the studied area. Also ashlar, masonries as well as the brick production is recovered without resorting to a local technological substrate, fleetingly brought about by the Caliphate occupation. When the dismemberment of the Caliphate is produced from the year 1010 these techniques were abandoned again. In the late eleventh and early twelfth century these techniques are recovered from Romanesque and a new change came, also from the establishment of the diocesan parish network. In one historical period that has been hardly exploited by research, this thesis seeks not only to establish a working methodology but lay the groundwork for future studies, both from the particular point of view, paying special attention in the constructive and stratigraphic studies of each of the evidence collected , and additionally in other more transversal aspects.

Comparative study of the pathogenicity of seabed isolates of Fusarium equiseti and the effect of the composition of the mineral salt medium and temperature on mycelia growth

The pathogenicity of seven strains of Fusarium equiseti isolated from seabed soil was evaluated on different host plants showing pre and post emergence damage. Radial growth of 27 strains was measured on culture media previously adjusted to different osmotic potentials with either KCl or NaCl (-1.50 to - 144.54 bars) at 15º, 25º and 35º C. Significant differences and interactive effects were observed in the response of mycelia to osmotic potential and temperature.

Comparative study of Fusarium communities from soil and rhizoplane of melon plants from tropical farming soils.

Fifty-nine rhizospheric soil samples from twenty different melon farms of Guatemala and Honduras were analysed to study the Fusarium species present in the soil and those developing on roots surfaces.

Species of Fusarium isolated from river and sea water of Southeastern Spain and pathogenicity on four plant species

Species of Fusarium were isolated from water samples collected from the Andarax River and coastal sea water of the Mediterranean in Granada and Almería provinces of southeastern Spain. In total, 18 water samples were analyzed from the Andarax River, and 10 species of Fusarium were isolated: Fusarium anthophilum, F. acuminatum, F. chlamydosporum, F. culmorum, F. equiseti, F. verticillioides, F. oxysporum, F. proliferatum, F. solani, and F. solani. When considering the samples by their origins, 77.8% of the river water samples yielded at least one species of Fusarium , with F. oxysporum comprising 72.2% of the total isolates. In the case of marine water, 45.5% of the samples yielded at least one species of Fusarium, with F. solani comprising 36.3% of the total isolates. The pathogenicity of 41 isolates representing nine of the species collected from river an sea water during the study ws evluated on barley, kohlrabe, melon, and tomato. Inoculation with F. acuminatum, F. chlamydosporum, F. culmorum, F. equiseti, F. verticillioides, F. oxysporum, F. proliferatum F. solani, and F. sambucinum resulted in pre-and post-emergence damping off. Pathogenicity of Fusarium isolates did not seem to be related to the origin of the isolates (sea water or fresh water). However, the presence of pathogenic species of Fusarium in river water flowing to the sea could indicate long-distance dispersal in natural water environments

First report of Fusarium verticillioides causing stalk and root rot of sorghum in Spain

Podredumbre del tallo y la raíz del sorgo causada por Fusarium verticillioides en España

Analytical solution to the one-dimensional non-uniform absorption of solar radiation in uncoated and coated single glass panes

The analytical solution to the one-dimensional absorption–conduction heat transfer problem inside a single glass pane is presented, which correctly takes into account all the relevant physical phenomena: the appearance of multiple reflections, the spectral distribution of solar radiation, the spectral dependence of optical properties, the presence of possible coatings, the non-uniform nature of radiation absorption, and the diffusion of heat by conduction across the glass pane. Additionally to the well established and known direct absorptance αe, the derived solution introduces a new spectral quantity called direct absorptance moment βe, that indicates where in the glass pane is the absorption of radiation actually taking place. The theoretical and numerical comparison of the derived solution with existing approximate thermal models for the absorption–conduction problem reveals that the latter ones work best for low-absorbing uncoated single glass panes, something not necessarily fulfilled by modern glazings.

Periodic time-domain modulation for the electrically tunable control of optical pulse train envelope and repetition rate multiplication

An electrically tunable system for the control of optical pulse sequences is proposed and demonstrated. It is based on the use of an electrooptic modulator for periodic phase modulation followed by a dispersive device to obtain the temporal Talbot effect. The proposed configuration allows for repetition rate multiplication with different multiplication factors and with the simultaneous control of the pulse train envelope by simply changing the electrical signal driving the modulator. Simulated and experimental results for an input optical pulse train of 10 GHz are shown for different multiplication factors and envelope shapes.

Effects of binaural stimulation in attention and EEG

When two pure tones of slightly different frequency are presented separately to each ear, the listener perceives a third single tone with amplitude variations at a frequency that equals the difference between the two tones, this perceptual illusion is known as binaural auditory beat. There are anecdotal reports that suggest that the binaural beat can entrain EEG activity and may affect the arousal levels, although few studies have been published. There is a need for double-blind, well-designed studies in order to establish a solid foundation for these sounds, as most of the documented benefits come from self-reported cases that could be affected by placebo effect. As BB’s are a cheap technology (it even exists a free open source programmable bin aural-beat generator on the internet named Gnaural), any achievement in this area could be of public interest. The aim in our research was to explore the potential of BB’s in a particular field: tasks that require focus and concentration. In order to detect changes in the brain waves that could relate to any particular improvement, EEG recordings of a small sample of individuals were also obtained. In this study we compare the effect of different binaural stimulation in 7 EEG frequency ranges, 78 participants were exposed to 20 min binaural beat stimulation. The effects were obtained both qualitative with cognitive test and quantitative with EEG analysis. Results suggest no significant statistical improvement in 20 min stimulation.

Effect of binaural stimulation on attention and EEG

When two pure tones of slightly different frequency are presented separately to each ear, the listener perceives a third single tone with amplitude variations at a frequency that equals the difference between the two tones; this perceptual illusion is known as the binaural auditory beat (BB). There are anecdotal reports that suggest that the binaural beat can entrain EEG activity and may affect the arousal levels, although few studies have been published. There is a need for double-blind, well-designed studies in order to establish a solid foundation for these sounds, as most of the documented benefits come from self-reported cases that could be affected by placebo effect. As BBs are a cheap technology (it even exists a free open source programmable binaural- beat generator on the Internet named Gnaural), any achievement in this area could be of public interest. The aim in our research was to explore the potential of BBs in a particular field: tasks that require focus and concentration. In order to detect changes in the brain waves that could relate to any particular improvement, EEG recordings of a small sample of individuals were also obtained. In this study we compare the effect of different binaural stimulation in 7 EEG frequency ranges. 78 participants were exposed to 20-min binaural beat stimulation. The effects were obtained both quali- tative with cognitive test and quantitative with EEG analysis. Results suggest no significant statistical improvement in 20-min stimulation.

Analysis of the performance of caissons with a yard and cylindrical geometry as a breakwater. Apollonius caisson

En el presente trabajo se analiza el cajón Apolonio como diseño conceptual para controlar la reflexión en monolitos de gravedad sometidos a esfuerzos dinámicos de oleaje.

Low-resource language recognition using a fusion of phoneme posteriorgram counts, acoustic and glottal-based i-vectors

This paper presents a description of our system for the Albayzin 2012 LRE competition. One of the main characteristics of this evaluation was the reduced number of available files for training the system, especially for the empty condition where no training data set was provided but only a development set. In addition, the whole database was created from online videos and around one third of the training data was labeled as noisy files. Our primary system was the fusion of three different i-vector based systems: one acoustic system based on MFCCs, a phonotactic system using trigrams of phone-posteriorgram counts, and another acoustic system based on RPLPs that improved robustness against noise. A contrastive system that included new features based on the glottal source was also presented. Official and postevaluation results for all the conditions using the proposed metrics for the evaluation and the Cavg metric are presented in the paper.

Effect of fire on the microstructure and mechanical response of structural steels for building construction

The research is an exhaustive study of the microstructure and of the stress-strain curves of structural steel S460N at temperatures typical of a fire. It includes a fractographic study of the fracture suifaces of cylindrical specimens, tensile tested at different fire scenarios, explaining the relationship between the failure micromechanisms and temperature. The paper ends with the comparison between the experimentally found strain-stress curves with that one's proposed by the EUROCODE EC3, resulting that in the case of steel S460N these are on the side ofsafety.