Neutronics and activation of the preliminary reacion chamber of HiPER reactor based in a SCLL blanket

Neutronics and activation of the preliminary reacion chamber of HiPER reactor based in a SCLL blanket

Chamber of valves in the Arenoso reservoir

Of the south of Spain, near the province of Cordova, in a tributary of the Guadalquivir River it has been constructed during the years 2004 to 2007 the reservoir called El Arenoso. El Arenoso reservoir that belongs to Environment Ministry is destined to downstream Guadalquivir’s water supply and the general regulation of the river. The dam is located on the same name river and it is next to the Montoro’s municipal district, 41 km northeast of Cordova. The main work consists on an embankment dam, with central clay core, and slates and greywacke shoulders. The core is covered downstream with a filter material and upstream with a transition material. The dimensions of the dam are 80 m high, 1.480 m long at its crest, and it has been needed more than 3 million m3 of materials, creating a waterproof barrier able to keep 160 hm3 as a useful reservoir. In the zone of the core is located the chamber of valves with a horizontal clearance of 10 m and a vertical clearance of 14,517 m. The present article exposes the most important characteristics of project and construction, of valves chamber of the Arenoso reservoir.

Neutronics and activation of the preliminary reaction chamber of HiPER reactor based in a SCLL blanket

The HiPER reactor design is exploring different reaction chambers. In this study, we tackle the neutronicsand activation studies of a preliminary reaction chamber based in the following technologies: unpro-tected dry wall for the First Wall, self-cooled lead lithium blanket, and independent low activation steelVacuum Vessel. The most critical free parameter in this stage is the blanket thickness, as a function ofthe6Li enrichment. After a parametric study, we select for study both a ?thin? and ?thick? blanket, with?high? and ?low?6Li enrichment respectively, to reach a TBR = 1.1. To help to make a choice, we com-pute, for both blanket options, in addition to the TBR, the energy amplification factor, the tritium partialpressure, the203Hg and210Po total activity in the LiPb loop, and the Vacuum Vessel thickness requiredto guarantee the reweldability during its lifetime. The thin blanket shows a superior performance in thesafety related issues and structural viability, but it operates at higher6Li enrichment. It is selected forfurther improvements. The Vacuum Vessel shows to be unviable in both cases, with the thickness varyingbetween 39 and 52 cm. Further chamber modifications, such as the introduction of a neutron reflector,are required to exploit the benefits of the thin blanket with a reasonable Vacuum Vessel.

The role of spatial and temporal radiation deposition in inertial fusion chambers: the case of HiPER¿

The first wall armour for the reactor chamber of HiPER will have to face short energy pulses of 5 to 20 MJ mostly in the form of x-rays and charged particles at a repetition rate of 5–10 Hz. Armour material and chamber dimensions have to be chosen to avoid/minimize damage to the chamber, ensuring the proper functioning of the facility during its planned lifetime. The maximum energy fluence that the armour can withstand without risk of failure, is determined by temporal and spatial deposition of the radiation energy inside the material. In this paper, simulations on the thermal effect of the radiation–armour interaction are carried out with an increasing definition of the temporal and spatial deposition of energy to prove their influence on the final results. These calculations will lead us to present the first values of the thermo-mechanical behaviour of the tungsten armour designed for the HiPER project under a shock ignition target of 48 MJ. The results will show that only the crossing of the plasticity limit in the first few micrometres might be a threat after thousands of shots for the survivability of the armour.

On the design and measurement of a novel non-orthogonal multi-beam network for triangular arrays of three radiating elements

An innovative dissipative multi-beam network for triangular arrays of three radiating elements is proposed. This novel network provides three orthogonal beams in θ0 elevation angle and a fourth one in the broadside steering direction. The network is composed of 90º hybrid couplers and fixed phase shifters. In this paper, a relation between network components, radiating element distance and beam steering directions will be shown. Application of the proposed dissipative network to the triangular cells of three radiating elements that integrate the intelligent antenna GEODA will be exhibited. This system works at 1.7 GHz, it has a 60º single radiating element beamwidth and a distance between array elements of 0.57 λ. Both beam patterns, theoretical and simulated, obtained with the network will be depicted. Moreover, the whole system, dissipative network built with GEODA cell array, has been measured in the anechoic chamber of the Radiation Group of Technical University of Madrid, demonstrating expected performance.

Study of a new 4×3 beam forming network for triangular arrays of three radiating elements

An innovative dissipative multi-beam network for triangular arrays of three radiating elements is proposed. This novel network provides three orthogonal beams in θ0 elevation angle and a fourth one in the broadside steering direction. The network is composed of 90º hybrid couplers and fixed phase shifters. In this paper, a relation between network components, radiating element distance and beam steering directions will be shown. Application of the proposed dissipative network to the triangular cells of three radiating elements that integrate the intelligent antenna GEODA will be exhibited. This system works at 1.7 GHz, it has a 60º single radiating element beamwidth and a distance between array elements of 0.57λ. Both beam patterns, theoretical and simulated, obtained with the network will be depicted. Moreover, the whole system, dissipative network built with GEODA cell array, has been measured in the anechoic chamber of the Radiation Group of Technical University of Madrid, demonstrating expected performance

Acoustic characterisation of cinema screens

As a consequence of cinema screens being placed in front of screen-speakers, a reduction in sound quality has been noticed. Cinema screens not only let the sound go through them, but also absorb a small amount of it and reflect the sound which impacts on the screen to the back, coming forward again in case it impacts on the loudspeaker. This backwards reflection in addition to the signal coming from the loudspeaker can lead to constructive or destructive interference at certain frequencies which usually results in comb filtering. In this project, this effect has been studied through researching amongst various data sheet provided by different manufacturers, acoustical measurements completed in the large anechoic chamber of the ISVR and some theoretical models developed with MatLab software. If results obtained with MatLab are accurate enough in comparison to the real measurements taken in the anechoic chamber this would lead to a good way to predict which would be the attenuation added to the system at each frequency, given that not all manufacturers provide an attenuation curve, but only an average attenuation. This average attenuation might be useless as sound waves have different wavelengths and its propagation through partitions varies. In fact, sound is composed by high and low frequencies, where high frequencies are characterised by a small wavelength which is usually easier to attenuate than low frequencies that characterised by bigger wavelengths. Furthermore, this information would be of great value to both screen manufacturers, who could offer a much more precise data in their data sheets; and customers, who would have a great amount of information to their disposal before purchasing and installing anything in their cinemas, being able to know by themselves which screen or loudspeaker should be best to meet their expectative. RESUMEN. La aparición de la digitalización de las bandas sonoras para las películas hace posible la mejora en la calidad de sonido de los cines. Sin embargo, un aspecto a tener en cuenta en esta calidad del sonido es la transmisión de éste a través de la pantalla, ya que normalmente tras ella se encuentran situados los altavoces. Las propiedades acústicas varían dependiendo del tipo de pantalla que se utilice, además de haber poca información a la que acceder para poder valorar su comportamiento. A lo largo de este proyecto, se analizan tres muestras de pantallas distintas donadas por distintos fabricantes para poder llegar a la conclusión de dependiendo del tipo de pantalla cuál es la distancia óptima a la que localizar la pantalla respecto al altavoz y con qué inclinación. Dicho análisis se realizó en la cámara anecoica del ISVR (University of Southampton) mediante la construcción de un marco de madera de 2x2 m en el que tensar las pantallas de cine, y un altavoz cuyo comportamiento sea el más similar al de los altavoces de pantalla reales. Los datos se captaron mediante cuatro micrófonos colocados en posiciones distintas y conectados al software Pulse de Brüel & Kjær, a través del cual se obtuvieron las respuestas en frecuencia del altavoz sin pantalla y con ella a diferentes distancias del altavoz. Posteriormente, los datos se analizaron con MatLab donde se calculó la atenuación, el factor de transmisión de la presión (PTF) y el análisis cepstrum. Finalmente, se realizó un modelo teórico del comportamiento de las pantallas perforadas basado en las placas perforadas utilizadas para atenuar el sonido entre distintas habitaciones. Como conclusión se llegó a que las pantallas curvadas son acústicamente más transparentes que las pantallas perforadas que a partir de 6 kHz son más acústicamente opacas. En las pantallas perforadas la atenuación depende del número de perforaciones por unidad de área y el diámetro de éstas. Dicha atenuación se reducirá si se reduce el diámetro de las perforaciones de la pantalla, o si se incrementa la cantidad de perforaciones. Acerca del efecto filtro peine, para obtener la mínima amplitud de éste la pantalla se deberá situar a una distancia entre 15 y 30 cm del altavoz, encontrando a la distancia de 30 cm que la última reflexión analizada a través de Cepstrum llega 5 ms más tarde que la señal directa, por lo cual no debería dañar el sonido ni la claridad del habla.

Gasification technology assessment of sterile coal to clean electrical power generation.

Sterile coal is a low-value residue associated to the coal extraction and mining activity. According to the type and origin of the coal bed configuration, sterile coal production can mainly vary on quantity, calorific value and presence of sulphur compounds. In addition, the potential availability of sterile coal within Spain is apparently high and its contribution to the local power generation would be of interest playing a significant role. The proposed study evaluates the availability and deployment of gasification technologies to drive clean electricity generation from waste coal and sterile rock coal, incorporating greenhouse gas emission mitigation systems, like CO2, H2S and NOx removal systems. It establishes the target facility and its conceptual basic design proposal. The syngas obtained after the gasification of sterile coal is processed through specific conditioning units before entering into the combustion chamber of a gas turbine. Flue gas leaving the gas turbine is ducted to a heat recovery steam generation boiler; the steam produced within the boilerdrives a steam turbine. The target facility resembles a singular Integrated Gasification in Combined Cycle (IGCC) power station. The evaluation of the conceptual basic design according to the power output set for a maximum sterile contribution, established that rates over 95% H2S and 90% CO2 removal can be achieved. Noticeable decrease of NOx compounds can be also achieved by the use of commercial technology. A techno-economic approach of the conceptual basic design is made evaluating the integration of potential unitsand their implementation within the target facility aiming toachieve clean power generation. The criterion to be compliant with the most restrictive regulation regarding environmental emissions is setting to carry out this analysis.

Quasi-cylindrical approximation to the swirling flow in an atomizer chamber

A quasi-cylindrical approximation is used to analyse the axisymmetric swirling flow of a liquid with a hollow air core in the chamber of a pressure swirl atomizer. The liquid is injected into the chamber with an azimuthal velocity component through a number of slots at the periphery of one end of the chamber, and flows out as an anular sheet through a central orifice at the other end, following a conical convergence of the chamber wall. An effective inlet condition is used to model the effects of the slots and the boundary layer that develops at the nearby endwall of the chamber. An analysis is presented of the structure of the liquid sheet at the end of the exit orifice, where the flow becomes critical in the sense that upstream propagation of long-wave perturbations ceases to be possible. This nalysis leads to a boundary condition at the end of the orifice that is an extension of the condition of maximum flux used with irrotational models of the flow. As is well known, the radial pressure gradient induced by the swirling flow in the bulk of the chamber causes the overpressure that drives the liquid towards the exit orifice, and also leads to Ekman pumping in the boundary layers of reduced azimuthal velocity at the convergent wall of the chamber and at the wall opposite to the exit orifice. The numerical results confirm the important role played by the boundary layers. They make the thickness of the liquid sheet at the end of the orifice larger than predicted by rrotational models, and at the same time tend to decrease the overpressure required to pass a given flow rate through the chamber, because the large axial velocity in the boundary layers takes care of part of the flow rate. The thickness of the boundary layers increases when the atomizer constant (the inverse of a swirl number, proportional to the flow rate scaled with the radius of the exit orifice and the circulation around the air core) decreases. A minimum value of this parameter is found below which the layer of reduced azimuthal velocity around the air core prevents the pressure from increasing and steadily driving the flow through the exit orifice. The effects of other parameters not accounted for by irrotational models are also analysed in terms of their influence on the boundary layers.

F2TE3: A Transparent semi-monocoque VIP Envelope

This article examines a new lightweight, slim, high energy efficient, light-transmitting, self-supporting envelope system, providing for seamless, free-form designs for use in architectural projects. The system exploits vacuum insulation panel technology. The research was based on envelope components already existing on the market and patents and prototypes built by independent laboratories, especially components implemented with silica gel insulation, as this is the most effective transparent thermal insulation there is today. The tests run on these materials revealed that there is not one that has all the features required of the new envelope model, although some do have properties that could be exploited to generate this envelope, namely, the vacuum chamber of vacuum insulation panels, the use of monolithic aerogel as insulation in some prototypes, and reinforced polyester barriers. These three design components have been combined and tested to design a new, variable geometry, energy-saving envelope system that also solves many of the problems that other studies ascribe to the use of vacuum insulation panels.

Free-Form, High Energy Performance, Transparent Envelope

This article examines, from the energy viewpoint, a new lightweight, slim, high energy efficient, light-transmitting envelope system, providing for seamless, free-form designs for use in architectural projects. The research was based on envelope components already existing on the market, especially components implemented with granular silica gel insulation, as this is the most effective translucent thermal insulation there is today. The tests run on these materials revealed that there is not one that has all the features required of the new envelope model, although some do have properties that could be exploited to generate this envelope, namely, the vacuum chamber of vacuum insulated panels (VIP), the monolithic aerogel used as insulation in some prototypes, reinforced polyester barriers. By combining these three design components — the high-performance thermal insulation of the vacuum chamber combined with monolithic silica gel insulation, the free-form design potential provided by materials like reinforced polyester and epoxy resins—, we have been able to define and test a new, variable geometry, energy-saving envelope system.

F²TE³: A Transparent semi-monocoque VIP Envelope

This article examines a new lightweight, slim, high energy efficient, light-transmitting, self-supporting envelope system, providing for seamless, free-form designs for use in architectural projects. The system exploits vacuum insulation panel technology. The research was based on envelope components already existing on the market and patents and prototypes built by independent laboratories, especially components implemented with silica gel insulation, as this is the most effective transparent thermal insulation there is today. The tests run on these materials revealed that there is not one that has all the features required of the new envelope model, although some do have properties that could be exploited to generate this envelope, namely, the vacuum chamber of vacuum insulation panels, the use of monolithic aerogel as insulation in some prototypes, and reinforced polyester barriers. These three design components have been combined and tested to design a new, variable geometry, energy-saving envelope system that also solves many of the problems that other studies ascribe to the use of vacuum insulation panels.

Caracterización y optimización de un sistema de sonido profesional

El presente proyecto tiene como objeto caracterizar y optimizar un equipo de sonido profesional, entendiendo por “caracterizar” el determinar los atributos particulares de cada uno de los componentes integrados en el sistema, y entendiendo por “optimizar” el hallar la mejor manera de obtener una respuesta plana para todo el rango de frecuencias, libre de distorsión, y en la mayor área posible. El sistema de sonido utilizado pertenece a un grupo musical de directo, por lo que se instala y se configura en cada concierto en función de las características del recinto, sea cerrado o al aire libre. Con independencia de estas particularidades, el sistema completo se divide en dos formaciones, L y R (lado izquierdo y lado derecho del escenario), por lo que cada formación se compone de un procesador digital de la señal, cuatro etapas de amplificación, un sistema line array de ocho unidades, y un conjunto de ocho altavoces de subgraves. Para llevar a cabo el objetivo planteado, se ha dividido el proyecto en las fases que a continuación se describen. En primer lugar, se han realizado, en la cámara anecoica de la EUITT, las medidas que permiten obtener las características de cada uno de los elementos que componen el sistema. Estas medidas se han almacenado en formato ASCII. En segundo lugar, se ha diseñado una interfaz gráfica que permite, utilizando las medidas almacenadas, caracterizar tanto la respuesta individual de cada elemento de la cadena del sistema de sonido como la respuesta combinada de una unidad line array y una unidad de subgraves. La interfaz es interactiva, y tiene además la capacidad de entregar automáticamente los valores de configuración que permiten la optimización del conjunto. Esto es, obtener alineamiento en el rango de frecuencias compartido por ambas unidades. Las medidas realizadas en la cámara anecoica se han utilizado igualmente para modelar el sistema line array al completo y poder realizar simulaciones en campo libre utilizando programas de predicción acústica. Se ha experimentado con los valores de configuración que permiten el alineamiento de los elementos individuales y obtenidos a través de la interfaz desarrollada, para comprobar la validez de los mismos con la formación line array y subgraves al completo. Por otro lado, se han analizado los métodos de optimización de sistemas propuestos por profesionales reconocidos del medio con el objetivo de aplicarlos en un evento real. En la preparación y montaje del evento, se han aplicado los valores de configuración proporcionados por la interfaz, y se ha comprobado la validez de los mismos realizando medidas in situ según los criterios propuestos en los métodos de optimización estudiados. ABSTRACT. This project aims to characterize and optimize a professional sound system. Characterize must be understood as determining the particular attributes of each component integrated in the system; optimize must be understood as finding the best way to get a flat response for all the frequency range, distortion free, in the largest possible area. The sound system under test belongs to a live musical group, so it is setup and configured on each concert depending on the characteristics of the enclosure, whether it’s indoor or outdoor. Apart from these features, the whole system is divided into two clusters, L and R (left and right side of the stage), so that each one is provided with a digital signal processor, four amplification stages, an eight-units line array system, and a set of eight subwoofers . To accomplish the stated objective, the project has been divided into the steps described below. To begin with, measures have been realized in the anechoic chamber of EUITT, which make possible obtaining the characteristics of each of the elements of the system. These measures have been stored in ASCII format. Then, a graphical interface has been designed that allow, using the stored measurements and from graphics, to characterize both the individual response of each element of the string sound system and the combined response of the several elements. The interface is interactive, and also has the ability to automatically deliver the configuration settings that allow the whole optimization. That means to get alignment in the frequency range shared by a line array unit and a subwoofer unit. The measurements made in the anechoic chamber have also been used to model the complete line array system and to perform free-field simulations using acoustical prediction programs. Simulations have been done with the configuration settings that allow the individual elements alignment (provided by the graphical interface developed), in order to check their validity with the full line array and subwoofer systems. On the other hand, analysis about the optimization methods, proposed by renowned professionals of the field, has been made in order to apply them in a real concert. In the setup and assembly of the event, configuration settings provided by the interface have been applied. Their validity has been proved by making measures on-site according to the criteria set in the studied optimization methods.

Drifting plasma collection by a positive biased tether wire in LEO-like plasma conditions: current measurement and plasma diagnostic

BETs is a three-year project financed by the Space Program of the European Commission, aimed at developing an efficient deorbit system that could be carried on board any future satellite launched into Low Earth Orbit (LEO). The operational system involves a conductive tape-tether left bare to establish anodic contact with the ambient plasma as a giant Langmuir probe. As a part of this project, we are carrying out both numerical and experimental approaches to estimate the collected current by the positive part of the tether. This paper deals with experimental measurements performed in the IONospheric Atmosphere Simulator (JONAS) plasma chamber of the Onera-Space Environment Department. The JONAS facility is a 9- m3 vacuum chamber equipped with a plasma source providing drifting plasma simulating LEO conditions in terms of density and temperature. A thin metallic cylinder, simulating the tether, is set inside the chamber and polarized up to 1000 V. The Earth's magnetic field is neutralized inside the chamber. In a first time, tether collected current versus tether polarization is measured for different plasma source energies and densities. In complement, several types of Langmuir probes are used at the same location to allow the extraction of both ion densities and electron parameters by computer modeling (classical Langmuir probe characteristics are not accurate enough in the present situation). These two measurements permit estimation of the discrepancies between the theoretical collection laws, orbital motion limited law in particular, and the experimental data in LEO-like conditions without magnetic fields. In a second time, the spatial variations and the time evolutions of the plasma properties around the tether are investigated. Spherical and emissive Langmuir probes are also used for a more extensive characterization of the plasma in space and time dependent analysis. Results show the ion depletion because of the wake effect and the accumulation of- ions upstream of the tether. In some regimes (at large positive potential), oscillations are observed on the tether collected current and on Langmuir probe collected current in specific sites.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.