Diseño para el Desarrollo

Resumen El Diseño, que apenas está considerado en las políticas de desarrollo, por su parte tampoco ha prestado la adecuada atención a los aspectos de justicia y de desarrollo global. Encontramos los antecedentes del Diseño para el Desarrollo en la “transferencia de tecnología y en la imitación”; en las “tecnologías apropiadas” de los años 70; en la moda de hacer negocios para la “base de la pirámide (BoP)”; más recientemente en el concepto de “innovación apropiada”; y últimamente en el “enfoque de las capacidades”, que engloba cuestiones sobre justicia, igualdad y desarrollo. En este artículo de revisión se realiza una aproximación a la situación actual del Diseño para el Desarrollo, incluyendo productos e iniciativas empresariales, académicas e investigadoras. Para ello, se ha realizado una revisión en buscadores generalistas y en publicaciones especializadas, accesibles desde la Universidad Politécnica de Madrid. Los resultados obtenidos abarcan desde productos comerciales, repositorios en línea de tecnologías de desarrollo, documentación abierta para el diseño/adaptación de productos para el desarrollo, conferencias, revistas, grupos de investigación, iniciativas emprendedoras, etc. Se trata de un tema que no tiene una univoca expresión y que está siendo tratado en muchas áreas, tanto de las ciencias sociales, como técnicas y sanitarias. Abstract The design, which is hardly considered in development policies, has not paid adequate attention to justice and global development issues. The antecedents of Design for Development are found in the "technology transfer and imitation"; in "appropriate technologies" of the 70s; in the fashion of doing business for the "base of the pyramid (BoP)"; more recently in the concept of "appropriate innovation"; and lately in the "capabilities approach" which includes questions about justice, equality and development. In this article review is performed an approach to the current situation of Design for Development including: products, business models and academic and research perspectives. In order to achieve it, the review has been conducted through search engines in generic and specialized publications, accessible from the Polytechnic University of Madrid. The results obtained include from commercial products, online repository development technologies, open documentation for design / adaptation of products for development, to conferences, journals, research groups, entrepreneurial initiatives, etc. This is a topic that has no unambiguous expression and that is being addressed in many areas, as in the social sciences and technical and health sciences. Resumo O projeto, que dificilmente pode ser considerada nas políticas de desenvolvimento, enquanto isso não prestou a atenção suficiente às questões da justiça e do desenvolvimento global. Encontramos a história do Projeto para o Desenvolvimento na "transferência de tecnologia e na imitação"; em "tecnologias apropriadas" dos anos 70; na forma de fazer negócios para a "base da pirâmide (BoP)"; mais recentemente, o conceito de "inovação apropriado"; e, ultimamente, a "abordagem de capacidades", que inclui perguntas sobre justiça, igualdade e desenvolvimento. Neste artigo de revisão existe uma abordagem para a situação atual do projeto de desenvolvimento, incluindo produtos e iniciativas empresariais, acadêmicos e investigadoras. Para isso, realizamos uma revisão nos motores de busca gerais e publicações especializadas, acessível a partir da Universidade Politécnica de Madrid. Os resultados variam de produtos comerciais tecnologias de desenvolvimento repositório on-line, documentação aberta para o projeto / adaptação de produtos para o desenvolvimento, conferências, revistas, grupos de pesquisa, iniciativas empresariais, etc. Este é um tema que não tem um só significado e que esta sendo tratado em muitas áreas, tanto nas ciências sociais, como técnicas e sanitarias.

Aerial Remote Sensing in Agriculture: A Practical Approach to Area Coverage and Path Planning for Fleets of Mini Aerial Robots

In this paper, a system that allows applying precision agriculture techniques is described. The application is based on the deployment of a team of unmanned aerial vehicles that are able to take georeferenced pictures in order to create a full map by applying mosaicking procedures for postprocessing. The main contribution of this work is practical experimentation with an integrated tool. Contributions in different fields are also reported. Among them is a new one-phase automatic task partitioning manager, which is based on negotiation among the aerial vehicles, considering their state and capabilities. Once the individual tasks are assigned, an optimal path planning algorithm is in charge of determining the best path for each vehicle to follow. Also, a robust flight control based on the use of a control law that improves the maneuverability of the quadrotors has been designed. A set of field tests was performed in order to analyze all the capabilities of the system, from task negotiations to final performance. These experiments also allowed testing control robustness under different weather conditions.

A simple approach to distributed objects in prolog

We present the design of a distributed object system for Prolog, based on adding remote execution and distribution capabilities to a previously existing object system. Remote execution brings RPC into a Prolog system, and its semantics is easy to express in terms of well-known Prolog builtins. The final distributed object design features state mobility and user-transparent network behavior. We sketch an implementation which provides distributed garbage collection and some degree of tolerance to network failures. We provide a preliminary study of the overhead of the communication mechanism for some test cases.

Enabling folksonomies for knowledge extraction: A semantic grounding approach

Folksonomies emerge as the result of the free tagging activity of a large number of users over a variety of resources. They can be considered as valuable sources from which it is possible to obtain emerging vocabularies that can be leveraged in knowledge extraction tasks. However, when it comes to understanding the meaning of tags in folksonomies, several problems mainly related to the appearance of synonymous and ambiguous tags arise, specifically in the context of multilinguality. The authors aim to turn folksonomies into knowledge structures where tag meanings are identified, and relations between them are asserted. For such purpose, they use DBpedia as a general knowledge base from which they leverage its multilingual capabilities.

End-User-Oriented Telco Mashups: The OMELETTE Approach

With the success of Web 2.0 we are witnessing a growing number of services and APIs exposed by Telecom, IT and content providers. Targeting the Web community and, in particular, Web application developers, service providers expose capabilities of their infrastructures and applications in order to open new markets and to reach new customer groups. However, due to the complexity of the underlying technologies, the last step, i.e., the consumption and integration of the offered services, is a non-trivial and time-consuming task that is still a prerogative of expert developers. Although many approaches to lower the entry barriers for end users exist, little success has been achieved so far. In this paper, we introduce the OMELETTE project and show how it addresses end-user-oriented telco mashup development. We present the goals of the project, describe its contributions, summarize current results, and describe current and future work.

Towards a lightweight mobile semantic-based approach for enhancing interaction with smart objects

This work describes a semantic extension for a user-smart object interaction model based on the ECA paradigm (Event-Condition-Action). In this approach, smart objects publish their sensing (event) and action capabilities in the cloud and mobile devices are prepared to retrieve them and act as mediators to configure personalized behaviours for the objects. In this paper, the information handled by this interaction system has been shaped according several semantic models that, together with the integration of an embedded ontological and rule-based reasoner, are exploited in order to (i) automatically detect incompatible ECA rules configurations and to (ii) support complex ECA rules definitions and execution. This semantic extension may significantly improve the management of smart spaces populated with numerous smart objects from mobile personal devices, as it facilitates the configuration of coherent ECA rules.

Preliminary approach to neutron instrument selecction at ESSB-Bilbao based on experience at ISIS molecular spectroscopy group

Collaborative efforts between the Neutronics and Target Design Group at the Instituto de Fusión Nuclear and the Molecular Spectroscopy Group at the ISIS Pulsed Neutron and Muon Source date back to 2012 in the context of the ESS-Bilbao project. The rationale for these joint activities was twofold, namely: to assess the realm of applicability of the low-energy neutron source proposed by ESS-Bilbao - for details; and to explore instrument capabilities for pulsed-neutron techniques in the range 0.05-3 ms, a time range where ESS-Bilbao and ISIS could offer a significant degree of synergy and complementarity. As part of this collaboration, J.P. de Vicente has spent a three-month period within the ISIS Molecular Spectroscopy Group, to gain hands-on experience on the practical aspects of neutron-instrument design and the requisite neutron-transport simulations. To date, these activities have resulted in a joint MEng thesis as well as a number of publications and contributions to national and international conferences. Building upon these previous works, the primary aim of this report is to provide a self-contained discussion of general criteria for instrument selection at ESS-Bilbao, the first accelerator-driven, low-energy neutron source designed in Spain. To this end, Chapter 1 provides a brief overview of the current design parameters of the accelerator and target station. Neutron moderation is covered in Chapter 2, where we take a closer look at two possible target-moderator-reflector configurations and pay special attention to the spectral and temporal characteristics of the resulting neutron pulses. This discussion provides a necessary starting point to assess the operation of ESSB in short- and long-pulse modes. These considerations are further explored in Chapter 3, dealing with the primary characteristics of ESS-Bilbao as a short- or long-pulse facility in terms of accessible dynamic range and spectral resolution. Other practical aspects including background suppression and the use of fast choppers are also discussed. The guiding principles introduced in the first three chapters are put to use in Chapter 4 where we analyse in some detail the capabilities of a small-angle scattering instrument, as well as how specific scientific requirements can be mapped onto the optimal use of ESS-Bilbao for condensed-matter research. Part 2 of the report contains additional supporting documentation, including a description of the ESSB McStas component, a detailed characterisation of moderator response and neutron pulses, and estimates ofparameters associated with the design and operation of neutron choppers. In closing this brief foreword, we wish to thank both ESS-Bilbao and ISIS for their continuing encouragement and support along the way.

GMonE: a complete approach to cloud monitoring

The inherent complexity of modern cloud infrastructures has created the need for innovative monitoring approaches, as state-of-the-art solutions used for other large-scale environments do not address specific cloud features. Although cloud monitoring is nowadays an active research field, a comprehensive study covering all its aspects has not been presented yet. This paper provides a deep insight into cloud monitoring. It proposes a unified cloud monitoring taxonomy, based on which it defines a layered cloud monitoring architecture. To illustrate it, we have implemented GMonE, a general-purpose cloud monitoring tool which covers all aspects of cloud monitoring by specifically addressing the needs of modern cloud infrastructures. Furthermore, we have evaluated the performance, scalability and overhead of GMonE with Yahoo Cloud Serving Benchmark (YCSB), by using the OpenNebula cloud middleware on the Grid’5000 experimental testbed. The results of this evaluation demonstrate the benefits of our approach, surpassing the monitoring performance and capabilities of cloud monitoring alternatives such as those present in state-of-the-art systems such as Amazon EC2 and OpenNebula.

Deep reactive ion etching of auxetic structures: present capabilities and challenges

Auxetic materials (or metamaterials) have negative Poisson ratios (NPR) and display the unexpected properties of lateral expansion when stretched, and equal and opposing densification when compressed. Such auxetic materials are being used more frequently in the development of novel products, especially in the fields of intelligent expandable actuators, shape-morphing structures, and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic materials and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study, we present a very promising approach for the development of auxetic materials and devices based on the use of deep reactive ion etching (DRIE). The process stands out for its precision and its potential applications to mass production. To our knowledge, it represents the first time this technology has been applied to the manufacture of auxetic materials with nanometric details. We take into account the present capabilities and challenges linked to the use of DRIE in the development of auxetic materials and auxetic-based devices.

Application of Bayesian approach in geotechnical engineering

En esta Tesis Doctoral se emplean y desarrollan Métodos Bayesianos para su aplicación en análisis geotécnicos habituales, con un énfasis particular en (i) la valoración y selección de modelos geotécnicos basados en correlaciones empíricas; en (ii) el desarrollo de predicciones acerca de los resultados esperados en modelos geotécnicos complejos. Se llevan a cabo diferentes aplicaciones a problemas geotécnicos, como es el caso de: (1) En el caso de rocas intactas, se presenta un método Bayesiano para la evaluación de modelos que permiten estimar el módulo de Young a partir de la resistencia a compresión simple (UCS). La metodología desarrollada suministra estimaciones de las incertidumbres de los parámetros y predicciones y es capaz de diferenciar entre las diferentes fuentes de error. Se desarrollan modelos "específicos de roca" para los tipos de roca más comunes y se muestra cómo se pueden "actualizar" esos modelos "iniciales" para incorporar, cuando se encuentra disponible, la nueva información específica del proyecto, reduciendo las incertidumbres del modelo y mejorando sus capacidades predictivas. (2) Para macizos rocosos, se presenta una metodología, fundamentada en un criterio de selección de modelos, que permite determinar el modelo más apropiado, entre un conjunto de candidatos, para estimar el módulo de deformación de un macizo rocoso a partir de un conjunto de datos observados. Una vez que se ha seleccionado el modelo más apropiado, se emplea un método Bayesiano para obtener distribuciones predictivas de los módulos de deformación de macizos rocosos y para actualizarlos con la nueva información específica del proyecto. Este método Bayesiano de actualización puede reducir significativamente la incertidumbre asociada a la predicción, y por lo tanto, afectar las estimaciones que se hagan de la probabilidad de fallo, lo cual es de un interés significativo para los diseños de mecánica de rocas basados en fiabilidad. (3) En las primeras etapas de los diseños de mecánica de rocas, la información acerca de los parámetros geomecánicos y geométricos, las tensiones in-situ o los parámetros de sostenimiento, es, a menudo, escasa o incompleta. Esto plantea dificultades para aplicar las correlaciones empíricas tradicionales que no pueden trabajar con información incompleta para realizar predicciones. Por lo tanto, se propone la utilización de una Red Bayesiana para trabajar con información incompleta y, en particular, se desarrolla un clasificador Naïve Bayes para predecir la probabilidad de ocurrencia de grandes deformaciones (squeezing) en un túnel a partir de cinco parámetros de entrada habitualmente disponibles, al menos parcialmente, en la etapa de diseño. This dissertation employs and develops Bayesian methods to be used in typical geotechnical analyses, with a particular emphasis on (i) the assessment and selection of geotechnical models based on empirical correlations; on (ii) the development of probabilistic predictions of outcomes expected for complex geotechnical models. Examples of application to geotechnical problems are developed, as follows: (1) For intact rocks, we present a Bayesian framework for model assessment to estimate the Young’s moduli based on their UCS. Our approach provides uncertainty estimates of parameters and predictions, and can differentiate among the sources of error. We develop ‘rock-specific’ models for common rock types, and illustrate that such ‘initial’ models can be ‘updated’ to incorporate new project-specific information as it becomes available, reducing model uncertainties and improving their predictive capabilities. (2) For rock masses, we present an approach, based on model selection criteria to select the most appropriate model, among a set of candidate models, to estimate the deformation modulus of a rock mass, given a set of observed data. Once the most appropriate model is selected, a Bayesian framework is employed to develop predictive distributions of the deformation moduli of rock masses, and to update them with new project-specific data. Such Bayesian updating approach can significantly reduce the associated predictive uncertainty, and therefore, affect our computed estimates of probability of failure, which is of significant interest to reliability-based rock engineering design. (3) In the preliminary design stage of rock engineering, the information about geomechanical and geometrical parameters, in situ stress or support parameters is often scarce or incomplete. This poses difficulties in applying traditional empirical correlations that cannot deal with incomplete data to make predictions. Therefore, we propose the use of Bayesian Networks to deal with incomplete data and, in particular, a Naïve Bayes classifier is developed to predict the probability of occurrence of tunnel squeezing based on five input parameters that are commonly available, at least partially, at design stages.