Road fright transport decoupling: A comparative analysis between the United Kingdom and Spain

Economic growth has traditionally been linked to road freight transport demand, leading to a steady rise in social and environmental impacts. Concern about this problem has caused the EU to promote a decoupling strategy aimed at boosting sustainable development in European countries by improving the efficiency of transport systems without curbing economic growth. Over the last few years empirical evidence in some countries such as the United Kingdom has shown an increase in GDP while the volume of road freight traffic has remained stable or even decreased. This paper compares recent decoupling trends by analyzing the evolution of road tonne-kms/GDP relationship in the United Kingdom and Spain from 1999 to 2007. This comparison seeks to identify the main differences and key drivers of decoupling in both countries. We first provide an overview of the divergences between both economic structures and levels of road transport intensity. Then we conduct a decomposition analysis in order to identify the variables that explain the evolution of truck traffic per unit of GDP in each country. The results show that the increasing share of services in GDP has substantially contributed to decreasing road transport demand in both cases. Changes in road transport intensity due to improvements in logistic and supply chain management have been more successful in the UK than in Spain.

Four Decades of Studying Global Linear Instability: Progress and Challenges

Global linear instability theory is concerned with the temporal or spatial development of small-amplitude perturbations superposed upon laminar steady or time-periodic three-dimensional flows, which are inhomogeneous in two(and periodic in one)or all three spatial directions.After a brief exposition of the theory,some recent advances are reported. First, results are presented on the implementation of a Jacobian-free Newton–Krylov time-stepping method into a standard finite-volume aerodynamic code to obtain global linear instability results in flows of industrial interest. Second, connections are sought between established and more-modern approaches for structure identification in flows, such as proper orthogonal decomposition and Koopman modes analysis (dynamic mode decomposition), and the possibility to connect solutions of the eigenvalue problem obtained by matrix formation or time-stepping with those delivered by dynamic mode decomposition, residual algorithm, and proper orthogonal decomposition analysis is highlighted in the laminar regime; turbulent and three-dimensional flows are identified as open areas for future research. Finally, a new stable very-high-order finite-difference method is implemented for the spatial discretization of the operators describing the spatial biglobal eigenvalue problem, parabolized stability equation three-dimensional analysis, and the triglobal eigenvalue problem; it is shown that, combined with sparse matrix treatment, all these problems may now be solved on standard desktop computers

Low cost 3D global instability analysis and flow sensitivity based on dynamic mode decomposition and high-order numerical tools

We explore the recently developed snapshot-based dynamic mode decomposition (DMD) technique, a matrix-free Arnoldi type method, to predict 3D linear global flow instabilities. We apply the DMD technique to flows confined in an L-shaped cavity and compare the resulting modes to their counterparts issued from classic, matrix forming, linear instability analysis (i.e. BiGlobal approach) and direct numerical simulations. Results show that the DMD technique, which uses snapshots generated by a 3D non-linear incompressible discontinuous Galerkin Navier?Stokes solver, provides very similar results to classical linear instability analysis techniques. In addition, we compare DMD results issued from non-linear and linearised Navier?Stokes solvers, showing that linearisation is not necessary (i.e. base flow not required) to obtain linear modes, as long as the analysis is restricted to the exponential growth regime, that is, flow regime governed by the linearised Navier?Stokes equations, and showing the potential of this type of analysis based on snapshots to general purpose CFD codes, without need of modifications. Finally, this work shows that the DMD technique can provide three-dimensional direct and adjoint modes through snapshots provided by the linearised and adjoint linearised Navier?Stokes equations advanced in time. Subsequently, these modes are used to provide structural sensitivity maps and sensitivity to base flow modification information for 3D flows and complex geometries, at an affordable computational cost. The information provided by the sensitivity study is used to modify the L-shaped geometry and control the most unstable 3D mode.

Decomposition driven interface evolution for layers of binary mixtures: I. Model dirivation and base states

Algebraic topology (homology) is used to analyze the state of spiral defect chaos in both laboratory experiments and numerical simulations of Rayleigh-Bénard convection. The analysis reveals topological asymmetries that arise when non-Boussinesq effects are present. The asymmetries are found in different flow fields in the simulations and are robust to substantial alterations to flow visualization conditions in the experiment. However, the asymmetries are not observable using conventional statistical measures. These results suggest homology may provide a new and general approach for connecting spatiotemporal observations of chaotic or turbulent patterns to theoretical models.

Analysis of microscopic magnitudes of radiative blast waves launched in xenon clusters with collisional-radiative steady-state simulations

Radiative shock waves play a pivotal role in the transport energy into the stellar medium. This fact has led to many efforts to scale the astrophysical phenomena to accessible laboratory conditions and their study has been highlighted as an area requiring further experimental investigations. Low density material with high atomic mass is suitable to achieve radiative regime, and, therefore, low density xenon gas is commonly used for the medium in which the radiative shocks such as radiative blast waves propagate. In this work, by means of collisional-radiative steady-state calculations, a characterization and an analysis of microscopic magnitudes of laboratory blast waves launched in xenon clusters are made. Thus, for example, the average ionization, the charge state distribution, the cooling time or photon mean free paths are studied. Furthermore, for a particular experiment, the effects of the self-absorption and self-emission in the specific intensity emitted by the shock front and that is going through the radiative precursor are investigated. Finally, for that experiment, since the electron temperature is not measured experimentally, an estimation of this magnitude is made both for the shock shell and the radiative precursor.

Minimum time control for multiphase buck converter: analysis and application

The combination of minimum time control and multiphase converter is a favorable option for dc-dc converters in applications where output voltage variation is required, such as RF amplifiers and dynamic voltage scaling in microprocessors, due to their advantage of fast dynamic response. In this paper, an improved minimum time control approach for multiphase buck converter that is based on charge balance technique, aiming at fast output voltage transition is presented. Compared with the traditional method, the proposed control takes into account the phase delay and current ripple in each phase. Therefore, by investigating the behavior of multiphase converter during voltage transition, it resolves the problem of current unbalance after the transient, which can lead to long settling time of the output voltage. The restriction of this control is that the output voltage that the converter can provide is related to the number of the phases, because only the duty cycles at which the multiphase converter has total ripple cancellation are used in this approach. The model of the proposed control is introduced, and the design constraints of the buck converters filter for this control are discussed. In order to prove the concept, a four-phase buck converter is implemented and the experimental results that validate the proposed control method are presented. The application of this control to RF envelope tracking is also presented in this paper.

Fourier analysis of the aerodynamic behavior of cup anemometers

The calibration results (the transfer function) of an anemometer equipped with several cup rotors were analyzed and correlated with the aerodynamic forces measured on the isolated cups in a wind tunnel. The correlation was based on a Fourier analysis of the normal-to-the-cup aerodynamic force. Three different cup shapes were studied: typical conical cups, elliptical cups and porous cups (conical-truncated shape). Results indicated a good correlation between the anemometer factor, K, and the ratio between the first two coefficients in the Fourier series decomposition of the normal-to-the-cup aerodynamic force

Instability Analysis of Incompressible Open Cavity Flows

El problema del flujo sobre una cavidad abierta ha sido estudiado en profundidad en la literatura, tanto por el interés académico del problema como por sus aplicaciones prácticas en gran variedad de problemas ingenieriles, como puede ser el alojamiento del tren de aterrizaje de aeronaves, o el depósito de agua de aviones contraincendios. Desde hace muchos a˜nos se estudian los distintos tipos de inestabilidades asociadas a este problema: los modos bidimensionales en la capa de cortadura, y los modos tridimensionales en el torbellino de recirculación principal dentro de la cavidad. En esta tesis se presenta un estudio paramétrico completo del límite incompresible del problema, empleando la herramienta de estabilidad lineal conocida como BiGlobal. Esta aproximación permite contemplar la estabilidad global del flujo, y obtener tanto la forma como las características de los modos propios del problema físico, sean estables o inestables. El estudio realizado permite caracterizar con gran detalle todos los modos relevantes, así como la envolvente de estabilidad en el espacio paramétrico del problema incompresible (Mach nulo, variación de Reynolds, espesor de capa límite incidente, relación altura/profundidad de la cavidad, y longitud característica de la perturbación en la dirección transversal). A la luz de los resultados obtenidos se proponen una serie de relaciones entre los parámetros y características de los modos principales, como por ejemplo entre el Reynolds crítico de un modo, y la longitud característica del mismo. Los resultados numéricos se contrastan con una campaña experimental, siendo la principal conclusión de dicha comparación que los modos lineales están presentes en el flujo real saturado, pero que existen diferencias notables en frecuencia entre las predicciones teóricas y los experimentos. Para intentar determinar la naturaleza de dichas diferencias se realiza una simulación numérica directa tridimensional, y se utiliza un algoritmo de DMD (descomposición dinámica de modos) para describir el proceso de saturación. ABSTRACT The problem of the flow over an open cavity has been studied in depth in the literature, both for being an interesting academical problem and due to the multitude of industrial applications, like the landing gear of aircraft, or the water deposit of firefighter airplanes. The different types of instabilities appearing in this flow studied in the literature are two: the two-dimensional shear layer modes, and the three-dimensional modes that appear in the main recirculating vortex inside the cavity. In this thesis a parametric study in the incompressible limit of the problem is presented, using the linear stability analysis known as BiGlobal. This approximation allows to obtain the global stability behaviour of the flow, and to capture both the morphological features and the characteristics of the eigenmodes of the physical problem, whether they are stable or unstable. The study presented here characterizes with great detail all the relevant eigenmodes, as well as the hypersurface of instability on the parameter space of the incompressible problem (Mach equal to zero, and variation of the Reynolds number, the incoming boundary layer thickness, the length to depth aspect ratio of the cavity and the spanwise length of the perturbation). The results allow to construct parametric relations between the characteristics of the leading eigenmodes and the parameters of the problem, like for example the one existing between the critical Reynolds number and its characteristic length. The numerical results presented here are compared with those of an experimental campaign, with the main conclusion of said comparison being that the linear eigenmode are present in the real saturated flow, albeit with some significant differences in the frequencies of the experiments and those predicted by the theory. To try to determine the nature of those differences a three-dimensional direct numerical simulation, analyzed with Dynamic Mode Decomposition algorithm, was used to describe the process of saturation.

On the harmonic analysis of cup anemometer rotation speed: A principle to monitor performance and maintenance status of rotating meteorological sensors

The calibration results of one anemometer equipped with several rotors, varying their size, were analyzed. In each case, the 30-pulses pert turn output signal of the anemometer was studied using Fourier series decomposition and correlated with the anemometer factor (i.e., the anemometer transfer function). Also, a 3-cup analytical model was correlated to the data resulting from the wind tunnel measurements. Results indicate good correlation between the post-processed output signal and the working condition of the cup anemometer. This correlation was also reflected in the results from the proposed analytical model. With the present work the possibility of remotely checking cup anemometer status, indicating the presence of anomalies and, therefore, a decrease on the wind sensor reliability is revealed.

Interregional trade changes in Spain caused by the introduction of a road fee charge for heavy goods vehicles

The introduction of a homogeneous road charging system according to the Directive 2011/76/EU for the use of roads is still under development in most European Union (EU) member states. Spain, like other EU members, has been encouraged to introduce a charging system for Heavy Goods Vehicles (HGVs) throughout the country. This nationwide charge has been postponed because there are serious concerns about their advantages from an economic point of view. Within this context, this paper applies an integrated modeling approach to shape elastic trade coefficients among regions by using a random utility based multiregional Input- Output (RUBMRIO) approach and a road transport network model in order to determine regional distributive and substitutive economic effects by simulating the introduction of a distance-based charge (?/km) considering 7,053.8 kilometers of free highways linking the capitals of the Spanish regions. In addition, an in-depth analysis of interregional trade changes is developed to evaluate and characterize the role of the road charging approach in trade relations among regions and across freight intensive economic sectors. For this purpose, differences in trade relations are described and assessed between a base-case or ?do nothing? scenario and a road fee-charge setting scenario. The results show that the specific amount of the charge set for HGVs affect each region differently and to a different extent because in some regions the price of commodities and the Generalized Transport Cost will decrease its competiveness within the country.

Comparative theoretical analysis between parallel and perpendicular geometries for 2D particle patterning in photovoltaic ferroelectric substrates

This paper describes the dielectrophoretic potential created by the evanescent electric field acting on a particle near a photovoltaic crystal surface depending on the crystal cut. This electric field is obtained from the steady state solution of the Kukhtarev equations for the photovoltaic effect, where the diffusion term has been disregarded. First, the space charge field generated by a small, square, light spot where d _ l (being d a side of the square and l the crystal thickness) is studied. The surface charge density generated in both geometries is calculated and compared as their relation determines the different properties of the dielectrophoretic potential for both cuts. The shape of the dielectrophoretic potential is obtained and compared for several distances to the sample. Afterwards other light patterns are studied by the superposition of square spots, and the resulting trapping profiles are analysed. Finally the surface charge densities and trapping profiles for different d/l relations are studied.

The Proper Generalized Decomposition With Application In Problems Of Dynamics

In this paper we address the new reduction method called Proper Generalized Decomposition (PGD) which is a discretization technique based on the use of separated representation of the unknown fields, specially well suited for solving multidimensional parametric equations. In this case, it is applied to the solution of dynamics problems. We will focus on the dynamic analysis of an one-dimensional rod with a unit harmonic load of frequency (ω) applied at a point of interest. In what follows, we will present the application of the methodology PGD to the problem in order to approximate the displacement field as the sum of the separated functions. We will consider as new variables of the problem, parameters models associated with the characteristic of the materials, in addition to the frequency. Finally, the quality of the results will be assessed based on an example.

Mies van der Rohe's Illinois Institute of Technology: Analysis and History of a Compositive Development = El IIT de Mies van der Rohe: análisis e historia de un proceso compositivo

The Illinois Institute of Technology (iit) campus, Chicago, by architect Ludwig Mies van der Rohe, is often considered as a transitional work, usually acknowledged as significant for the reorientation of his professional career after he emigrated to the United States. Moreover, its favorable recognition today is somehow indicative of its relevance as a model for urban intervention in the contemporary American city and for contemporary city planning in general, not to mention the profound impact that it had on the cityscape of Chicago. However, today we know it was rather the result of a close collaboration between he and Ludwig Hilberseimer —later on, to be completed with Alfred Caldwell— who merged their personal ideas and expertise in the design for the first time. In addition to this, when one tries to locate the design within its own historical context and evaluate the sources of its approach to it, some contradictions arise. The major impact of the images produced by Mies to promote its realization —widely disseminated in most contemporary architectural periodicals— probably outshined the particular circumstances in which the design was conceived. In fact, it would never be materialized as originally presented, but it was, instead, continuously reworked according to land availability in the site —a circumstance often ignored by subsequent architectural critic, that enthusiastically praised the design even before it was fully completed. One of the main consequences of looking at iit from such a standpoint is that, when historically contextualized, one can appreciate that, due to the urban scale of its implementation process, the design had to face a complex reality very different to that initially planned by the architect, often far from his actual possibilities of intervention. Such approach is in contradiction with the common description of the design as a ‘tabula rasa’ that allegedly would have been formulated on the basis of a full denial of its context. On the contrary, the ever-changing circumstances of the design motivated a necessary re-interpretation of the relation between its executed fragments, in order to keep the original identity of the whole in an ever-changing context. This situation implied a continuous transformation of the design by means of a steady re-composition of its elements: as the number of completed buildings increased in its successive stages, their relation to their site-specific context changed, in a very particular process that these lines try to delineate. Requiring decades to be erected, neither of its authors would ever see the design finished as planned, partially because of the difficulties in acquiring the extension of land that it required. Considering the study of this process as able to provide a valuable gateway to understand the urban discourse that the architects entailed, the aim of these lines is to analyze the problems that the iit campus design had to face. As a starting point, a relationship between practice and theory in the activity of the authors implied in iit campus design has been assumed. Far from being interrupted during World War ii, strong historical evidence can be found to infer that both were developed in parallel. Consequently, the historical sequence of the preserved testimonies has been put into context, as well as their transformation while Mies remained in charge for the campus Master Plan. Notably, when seen from this perspective, some ideas already expressed during his previous European practice were still present during the design process. Particularly, Mies's particular understanding of certain architectural concepts — such as those of ‘order’ and ‘structure’—can be traced paralleling the theories about urban planning from his collaborators, a fact that possibly facilitated the campus successful development. The study of the way these ideas were actually redeveloped and modified in the American urban context, added to the specific process of the implementation of iit campus design, sheds a new light for a critical interpretation of the reasons that made it possible, and of the actual responsibility of Mies's collaborators in its overall development and final completion. RESUMEN El campus del Illinois Institute of Technology (iit) de Chicago, obra del arquitecto Ludwig Mies van der Rohe, es a menudo considerado como una obra de transición que, por lo general, ha venido siendo reconocida como relevante para la reorientación de su carrera profesional posterior a su exilio en los Estados Unidos. El reconocimiento del que goza el proyecto es indicativo, de algún modo, de su importancia como modelo para la intervención urbana en la ciudad norteamericana contemporánea y el planeamiento de la ciudad contemporánea en general, sin olvidar el profundo impacto que ha tenido sobre el paisaje urbano de Chicago. Sin embargo, hoy sabemos que el resultado se benefició de su estrecha colaboración con Ludwig Hilberseimer y se completaría más tarde con la de Alfred Caldwell, quienes unieron sus ideas y experiencia profesional en el proyecto por primera vez. Asimismo, cuando se intenta ubicar el proyecto dentro de su propio contexto histórico y evaluar los criterios de su manera de abordarlo, surgen algunas contradicciones. El considerable impacto de las imágenes producidas por Mies para impulsar su ejecución —ampliamente difundidas en la mayoría de publicaciones de arquitectura de la época— probablemente eclipsó las particulares circunstancias en las que el proyecto fue concebido. De hecho, nunca llegó a materializarse tal y como fue inicialmente presentado. Por contra, fue reelaborado de manera continua, de acuerdo a la disponibilidad de suelo en el emplazamiento; una circunstancia a menudo ignorada por la crítica posterior, que elogió con entusiasmo el proyecto antes siquiera de que fuese terminado. Una de las principales consecuencias de contemplar el iit desde semejante punto de vista es que, una vez contextualizada históricamente su puesta en obra, se puede apreciar que el arquitecto tuvo que enfrentarse a una compleja realidad urbana muy diferente a la inicialmente prevista —probablemente debido a la escala del proyecto— a menudo lejos de sus posibilidades reales de intervención. Este enfoque contradice la descripción habitual del proyecto como una ‘tabula rasa’, que supuestamente se habría formulado sobre la base de una negación completa de su contexto. Por el contrario, las circunstancias cambiantes del proyecto obligaron una necesaria reinterpretación de la relación entre sus frag mentos ejecutados, con el fin de mantener la identidad original del conjunto en un contexto en constante cambio. Esta situación implicó una continua transformación del proyecto por medio de una permanente re-composición de sus elementos: según se incrementaba el número de edificios construidos en las etapas sucesivas de desarrollo del conjunto, variaba su relación con el contexto específico en que se emplazaban, en un proceso muy particular que estas líneas tratan de perfilar. Al necesitar décadas para ser levantado, ninguno de sus autores vería el conjunto terminado según lo planificado, en parte debido a las dificultades para la adquisición de la extensión de suelo que demandaba. Asumiendo que el estudio de este proceso es capaz de proporcionar una valiosa puerta de entrada para elucidar el discurso urbano asumido por los Mies, el objetivo de estas líneas es analizar los problemas a los que el proyecto del campus del iit tuvo que enfrentarse. Como punto de partida, se ha supuesto una relación entre la práctica y la teoría en la actividad de los autores implicados en el proyecto del campus del iit. Lejos de interrumpirse durante la Segunda Guerra Mundial, existen evidencias históricas sólidas para deducir que ambas vertientes se desarrollaron en paralelo. En consecuencia, se ha contextualizado la secuencia histórica de los testimonios conservados, así como su transformación durante el periodo en que Mies estuvo a cargo del Plan General del campus. Significativamente, al ser contempladas bajo esta perspectiva, algunas ideas ya expresadas durante su práctica europea anterior resultan aún presentes durante la redacción del proyecto. En concreto, se puede trazar un paralelismo entre la comprensión particular de Mies de ciertos conceptos arquitectónicos —como los de ‘orden’ y ‘estructura’— y las teorías sobre el urbanismo de sus colaboradores, hecho que posiblemente facilitó el exitoso desarrollo del proyecto. El estudio de la manera en que estas ideas fueron reelaboradas y modificadas en el contexto urbano estadounidense, sumado al proceso específico de su aplicación en el proyecto del campus del iit, arroja una nueva luz para una interpretación crítica tanto de las razones que lo hicieron posible, como del papel real que los colaboradores de Mies tuvieron en su desarrollo y ejecución final.

Aerodynamic database error filtering via high order singular value decomposition

Esta Tesis presenta un nuevo método para filtrar errores en bases de datos multidimensionales. Este método no precisa ninguna información a priori sobre la naturaleza de los errores. En concreto, los errrores no deben ser necesariamente pequeños, ni de distribución aleatoria ni tener media cero. El único requerimiento es que no estén correlados con la información limpia propia de la base de datos. Este nuevo método se basa en una extensión mejorada del método básico de reconstrucción de huecos (capaz de reconstruir la información que falta de una base de datos multidimensional en posiciones conocidas) inventado por Everson y Sirovich (1995). El método de reconstrucción de huecos mejorado ha evolucionado como un método de filtrado de errores de dos pasos: en primer lugar, (a) identifica las posiciones en la base de datos afectadas por los errores y después, (b) reconstruye la información en dichas posiciones tratando la información de éstas como información desconocida. El método resultante filtra errores O(1) de forma eficiente, tanto si son errores aleatorios como sistemáticos e incluso si su distribución en la base de datos está concentrada o esparcida por ella. Primero, se ilustra el funcionamiento delmétodo con una base de datosmodelo bidimensional, que resulta de la dicretización de una función transcendental. Posteriormente, se presentan algunos casos prácticos de aplicación del método a dos bases de datos tridimensionales aerodinámicas que contienen la distribución de presiones sobre un ala a varios ángulos de ataque. Estas bases de datos resultan de modelos numéricos calculados en CFD. ABSTRACT A method is presented to filter errors out in multidimensional databases. The method does not require any a priori information about the nature the errors. In particular, the errors need not to be small, neither random, nor exhibit zero mean. Instead, they are only required to be relatively uncorrelated to the clean information contained in the database. The method is based on an improved extension of a seminal iterative gappy reconstruction method (able to reconstruct lost information at known positions in the database) due to Everson and Sirovich (1995). The improved gappy reconstruction method is evolved as an error filtering method in two steps, since it is adapted to first (a) identify the error locations in the database and then (b) reconstruct the information in these locations by treating the associated data as gappy data. The resultingmethod filters out O(1) errors in an efficient fashion, both when these are random and when they are systematic, and also both when they concentrated and when they are spread along the database. The performance of the method is first illustrated using a two-dimensional toymodel database resulting fromdiscretizing a transcendental function and then tested on two CFD-calculated, three-dimensional aerodynamic databases containing the pressure coefficient on the surface of a wing for varying values of the angle of attack. A more general performance analysis of the method is presented with the intention of quantifying the randomness factor the method admits maintaining a correct performance and secondly, quantifying the size of error the method can detect. Lastly, some improvements of the method are proposed with their respective verification.