Teaching Magnetic Design using CAD tools

Design of magnetic components is a multivariable problem. There are many different combinations of shapes, sizes and materials for the core with many diameters for the wires. So it is difficult to find the optimum design without a great number of iterations. Analytically only a few combinations are usually studied but it is very easy to take into account all the combinations using a CAD tool [1]. In this work the CAD tool used is PExprt (ANSYS [2]) which is being developed at UPMCEI.

Estudio de la inserción de regeneradores 1r en un enlace óptico WDM punto a punto mediante herramientas CAD

El objetivo de este proyecto es estudiar el posicionamiento óptimo de un amplificador óptico dopado con Erbio (EDFA, Erbium-Doped Fiber Amplifier) en un enlace de fibra óptica punto a punto a través de la herramienta de simulación VPI photonics. Primero, se han expuesto los principios físicos que definen el funcionamiento de este tipo de amplificadores 1R. Posteriormente se han realizado lo que hemos denominado escenarios, en los que se han diseñado distintos casos de estudio.

Integration of design tools and knowledge capture into a CAD system: a case study

onceptual design phase is partially supported by product lifecycle management/computer-aided design (PLM/CAD) systems causing discontinuity of the design information flow: customer needs — functional requirements — key characteristics — design parameters (DPs) — geometric DPs. Aiming to address this issue, it is proposed a knowledge-based approach is proposed to integrate quality function deployment, failure mode and effects analysis, and axiomatic design into a commercial PLM/CAD system. A case study, main subject of this article, was carried out to validate the proposed process, to evaluate, by a pilot development, how the commercial PLM/CAD modules and application programming interface could support the information flow, and based on the pilot scheme results to propose a full development framework.

A CAD framework for the characterization and use of Memristor models

In the recent years the missing fourth component, the memristor, was successfully synthesized. However, the mathematical complexity and variety of the models behind this component, in addition to the existence of convergence problems in the simulations, make the design of memristor-based applications long and difficult. In this work we present a memristor model characterization framework which supports the automated generation of subcircuit files. The proposed environment allows the designer to choose and parameterize the memristor model that best suits for a given application. The framework carries out characterizing simulations in order to study the possible non-convergence problems, solving the dependence on the simulation conditions and guaranteeing the functionality and performance of the design. Additionally, the occurrence of undesirable effects related to PVT variations is also taken into account. By performing a Monte Carlo or a corner analysis, the designer is aware of the safety margins which assure the correct device operation.

Desarrollo de una guía de aprendizaje para el manejo del entorno de CAD IspLEVER

En este proyecto se analizan las características y el ciclo de diseño asociado al entorno de CAD IspLEVER, de Lattice Semiconductor, con la finalidad de evaluar su adecuación a la docencia relacionada con la ingeniería de sistemas digitales cableados. En base a este estudio se realiza una guía del manejo de las diferentes herramientas que se integran en el entorno. Además, se realiza la caracterización de una serie de familias de dispositivos del fabricante Lattice Semiconductor que pudiera servir de apoyo a la hora de elegir un dispositivo de este fabricante para la realización de un determinado diseño. Para dar comienzo a la realización del estudio del entorno y de las herramientas que integra IspLEVER, se procedió a la familiarización con el marco de trabajo. Esta familiarización se realizó, en un principio, a través de la lectura de la documentación ofrecida por el fabricante en su página web, http://www.latticesemi.com. Tras esta lectura, que sirvió para tener una primera visión de las características de la herramienta, se procedió a la descarga del paquete de instalación; el fabricante ofrece una versión de evaluación que expira a los 12 meses. Una vez descargado, se instaló y para terminar con los preparativos, se pasó el procedimiento de obtención de la licencia. Con ello se consiguió tener el software preparado para su utilización. A continuación se emplearon horas de trabajo para, sin documentación alguna, tratar de crear diseños; con este trabajo se pretendía detectar lo intuitivo que resulta el entorno cuando se tienen conocimientos de herramientas de CAD electrónico. Tras esta primera toma de contacto con el entorno real, se procedió al estudio de las diferentes opciones que ofrece para la realización de diseños, ya sean lógicos o físicos. Además del estudio de todas las posibilidades que ofrece el entorno, el trabajo se focalizó en la detección y comparación de las distintas opciones que ofrece para realizar una misma tarea, como ocurre con la asignación de pines o con la revisión de los resultados de una simulación, entre otras. Entrelazado con el estudio de las opciones que ofrece el entorno, se realizó el estudio de las distintas herramientas de trabajo integradas en el mismo. Una vez estudiado el entorno y las herramientas, se procedió a la realización del tutorial. Se capturaron todas las imágenes que se consideraron apropiadas para que al alumno le resultase cómodo y fácil seguir todas las indicaciones que el tutorial ofrece, para la realización de un ciclo de diseño lógico completo. Tras la realización del tutorial, se procedió a revisar la amplia documentación que el fabricante ofrece de cada una de las distintas familias de dispositivos que fabrica. El fin de esta revisión no fue otro que realizar una caracterización de las distintas familias, que pudiera servir de apoyo a la hora de elegir un dispositivo de este fabricante para la realización de un determinado diseño. Este estudio de las familias de dispositivos del fabricante, también se realizó para detectar qué familia de dispositivos era la más idónea para incluir uno de sus miembros en una hipotética placa de prototipado, para la realización de prácticas de laboratorio. ABSTRACT. This project consists in the analysis of the characteristics and the design cycle associated with the IspLEVER environment of CAD, by Lattice Semiconductor. The objective of that analysis is to evaluate their suitability for teaching engineering related to wired digital systems. Based on this analysis a guide was made for managing the different tools that are integrated into the environment. In addition, the characterization of several families by the manufacturer Lattice Semiconductor was made, with the objective that it could be used to support the choice of a Lattice’s device to perform a certain design. To start the IspLEVER environment and tools study, I began with a familiarization with the environment. This familiarization consisted in a study of the manufacturer documentation offered in their web page, http://www.latticesemi.com. After that, I had a general view about the characteristics of the environment and environment tools. Then I continued downloading the installation package. The manufacturer offers an evaluation version that expires in the period of one year. After that download, the environment was installed. Finally, the licensing procedure was followed to finish with the preparations. Then, the software was prepared for its utilization. Following, several work hours were wasted without documentation, trying to create designs. This work has been to identify how intuitive the environment is when you have knowledge of electronic CAD tools. After this first point of contact with the real environment, I proceeded to study different offered options, by the manufacturer, for the realization of either logical or physical designs. In addition to studying all the possibilities offered by the environment, the work is focused on the detection and comparison of the various options offered to perform the same task, as with the pin assignment or reviewing the results of a simulation… At the same time, the environment tools were studied. At this point, I began creating the tutorial. I captured all the figures that I consider important to make it easy to the students. The tutorial contains a complete logical design cycle. When the tutorial was finished, I started to review the manufacturer documentation about each devices family. The purpose of this review was to characterize the different families to support the device selection in future designs. Another purpose of that characterization was focused on the detection of the best family to include one of its members in a prototyping board for conducting laboratory practices.

Contribución al desarrollo de técnicas CAD para el diseño de antenas impresas y dispositivos pasivos de microondas basadas en el método de elementos finitos

El objetivo principal de esta tesis es el desarrollo de herramientas numéricas basadas en técnicas de onda completa para el diseño asistido por ordenador (Computer-Aided Design,‘CAD’) de dispositivos de microondas. En este contexto, se desarrolla una herramienta numérica basada en el método de los elementos finitos para el diseño y análisis de antenas impresas mediante algoritmos de optimización. Esta técnica consiste en dividir el análisis de una antena en dos partes. Una parte de análisis 3D que se realiza sólo una vez en cada punto de frecuencia de la banda de funcionamiento donde se sustituye una superficie que contiene la metalización del parche por puertas artificiales. En una segunda parte se inserta entre las puertas artificiales en la estructura 3D la superficie soportando una metalización y se procede un análisis 2D para caracterizar el comportamiento de la antena. La técnica propuesta en esta tesis se puede implementar en un algoritmo de optimización para definir el perfil de la antena que permite conseguir los objetivos del diseño. Se valida experimentalmente dicha técnica empleándola en el diseño de antenas impresas de banda ancha para diferentes aplicaciones mediante la optimización del perfil de los parches. También, se desarrolla en esta tesis un procedimiento basado en el método de descomposición de dominio y el método de los elementos finitos para el diseño de dispositivos pasivos de microonda. Se utiliza este procedimiento en particular para el diseño y sintonía de filtros de microondas. En la primera etapa de su aplicación se divide la estructura que se quiere analizar en subdominios aplicando el método de descomposición de dominio, este proceso permite analizar cada segmento por separado utilizando el método de análisis adecuado dado que suele haber subdominios que se pueden analizar mediante métodos analíticos por lo que el tiempo de análisis es más reducido. Se utilizan métodos numéricos para analizar los subdominios que no se pueden analizar mediante métodos analíticos. En esta tesis, se utiliza el método de los elementos finitos para llevar a cabo el análisis. Además de la descomposición de dominio, se aplica un proceso de barrido en frecuencia para reducir los tiempos del análisis. Como método de orden reducido se utiliza la técnica de bases reducidas. Se ha utilizado este procedimiento para diseñar y sintonizar varios ejemplos de filtros con el fin de comprobar la validez de dicho procedimiento. Los resultados obtenidos demuestran la utilidad de este procedimiento y confirman su rigurosidad, precisión y eficiencia en el diseño de filtros de microondas. ABSTRACT The main objective of this thesis is the development of numerical tools based on full-wave techniques for computer-aided design ‘CAD’ of microwave devices. In this context, a numerical technique based on the finite element method ‘FEM’ for the design and analysis of printed antennas using optimization algorithms has been developed. The proposed technique consists in dividing the analysis of the antenna in two stages. In the first stage, the regions of the antenna which do not need to be modified during the CAD process are initially characterized only once from their corresponding matrix transfer function (Generalized Admittance matrix, ‘GAM’). The regions which will be modified are defined as artificial ports, precisely the regions which will contain the conducting surfaces of the printed antenna. In a second stage, the contour shape of the conducting surfaces of the printed antenna is iteratively modified in order to achieve a desired electromagnetic performance of the antenna. In this way, a new GAM of the radiating device which takes into account each printed antenna shape is computed after each iteration. The proposed technique can be implemented with a genetic algorithm to achieve the design objectives. This technique is validated experimentally and applied to the design of wideband printed antennas for different applications by optimizing the shape of the radiating device. In addition, a procedure based on the domain decomposition method and the finite element method has been developed for the design of microwave passive devices. In particular, this procedure can be applied to the design and tune of microwave filters. In the first stage of its implementation, the structure to be analyzed is divided into subdomains using the domain decomposition method; this process allows each subdomains can be analyzed separately using suitable analysis method, since there is usually subdomains that can be analyzed by analytical methods so that the time of analysis is reduced. For analyzing the subdomains that cannot be analyzed by analytical methods, we use the numerical methods. In this thesis, the FEM is used to carry out the analysis. Furthermore the decomposition of the domain, a frequency sweep process is applied to reduce analysis times. The reduced order model as the reduced basis technique is used in this procedure. This procedure is applied to the design and tune of several examples of microwave filters in order to check its validity. The obtained results allow concluding the usefulness of this procedure and confirming their thoroughness, accuracy and efficiency for the design of microwave filters.

Simulation of impulse response for indoor visible light communications using 3D CAD models

n this article, a tool for simulating the channel impulse response for indoor visible light communications using 3D computer-aided design (CAD) models is presented. The simulation tool is based on a previous Monte Carlo ray-tracing algorithm for indoor infrared channel estimation, but including wavelength response evaluation. The 3D scene, or the simulation environment, can be defined using any CAD software in which the user specifies, in addition to the setting geometry, the reflection characteristics of the surface materials as well as the structures of the emitters and receivers involved in the simulation. Also, in an effort to improve the computational efficiency, two optimizations are proposed. The first one consists of dividing the setting into cubic regions of equal size, which offers a calculation improvement of approximately 50% compared to not dividing the 3D scene into sub-regions. The second one involves the parallelization of the simulation algorithm, which provides a computational speed-up proportional to the number of processors used.

A CAD development strategy for the next years

This paper suggests a new strategy to develop CAD applications taking into account some of the most interesting proposals which have recently appeared in the technology development arena. Programming languages, operating systems, user devices, software architecture, user interfaces and user experience are among the elements which are considered for a new development framework. This strategy considers the organizational and architectural aspects of the CAD application together with the development framework. The architectural and organizational aspects are based on the programmed design concept, which can be implemented by means of a three-level software architecture. These levels are the conceptual level based on a declarative language, the mathematical level based on the geometric formulation of the product model and the visual level based on the polyhedral representation of the model as required by the graphic card. The development framework which has been considered is Windows 8. This operating system offers three development environments, one for web pplications (HTML5 + CSS3 + JavaScript), and other for native applications C/C++) and of course yet another for .NET applications (C#, VB, F#, etc.). The use rinterface and user experience for non-web application is described ith XAML (a well known declarative XML language) and the 3D API for games and design applications is DirectX. Additionally, Windows 8 facilitates the use of hybrid solutions, in which native and managed code can interoperate easily. Some of the most remarkable advantages of this strategy are the possibility of targeting both desktop and touch screen devices with the same development framework, the usage of several programming paradigms to apply the most appropriate language to each domain and the multilevel segmentation of developers and designers to facilitate the implementation of an open network of collaborators.

El puente del Cadí y la puerta de los Panderos, en Granada

El puente del Cadí y la puerta de los Panderos, en Granada