Broadband Channel Long Delay Cluster Measurements and Analysis at 2.4GHz in Subway Tunnels

The delay caused by the reflected ray in broadband communication has a great influence on the communications in subway tunnel. This paper presents measurements taken in subway tunnels at 2.4 GHz, with 5 MHz bandwidth. According to propagation characteristics of tunnel, the measurements were carried out with a frequency domain channel sounding technique, in three typical scenarios: line of sight (LOS), Non-line-of-sight (NLOS) and far line of sight (FLOS), which lead to different delay distributions. Firstly IFFT was chosen to get channel impulse response (CIR) h(t) from measured three-dimensional transfer functions. Power delay profile (PDP) was investigated to give an overview of broadband channel model. Thereafter, a long delay caused by the obturation of tunnel is observed and investigated in all the scenarios. The measurements show that the reflection can be greatly remained by the tunnel, which leads to long delay cluster where the reflection, but direct ray, makes the main contribution for radio wave propagation. Four important parameters: distribution of whole PDP power, first peak arriving time, reflection cluster duration and PDP power distribution of reflection cluster were studied to give a detailed description of long delay characteristic in tunnel. This can be used to ensure high capacity communication in tunnels

Análisis de los factores determinantes de la repetición del proceso de compra en el comercio electrónico entre empresas y consumidores finales. Aplicación al mercado español

Las Tecnologías de la Información y la Comunicación en general e Internet en particular han supuesto una revolución en nuestra forma de comunicarnos, relacionarnos, producir, comprar y vender acortando tiempo y distancias entre proveedores y consumidores. A la paulatina penetración del ordenador, los teléfonos inteligentes y la banda ancha fija y/o móvil ha seguido un mayor uso de estas tecnologías entre ciudadanos y empresas. El comercio electrónico empresa–consumidor (B2C) alcanzó en 2010 en España un volumen de 9.114 millones de euros, con un incremento del 17,4% respecto al dato registrado en 2009. Este crecimiento se ha producido por distintos hechos: un incremento en el porcentaje de internautas hasta el 65,1% en 2010 de los cuales han adquirido productos o servicios a través de la Red un 43,1% –1,6 puntos porcentuales más respecto a 2010–. Por otra parte, el gasto medio por comprador ha ascendido a 831€ en 2010, lo que supone un incremento del 10,9% respecto al año anterior. Si segmentamos a los compradores según por su experiencia anterior de compra podemos encontrar dos categorías: el comprador novel –que adquirió por primera vez productos o servicios en 2010– y el comprador constante –aquel que había adquirido productos o servicios en 2010 y al menos una vez en años anteriores–. El 85,8% de los compradores se pueden considerar como compradores constantes: habían comprado en la Red en 2010, pero también lo habían hecho anteriormente. El comprador novel tiene un perfil sociodemográfico de persona joven de entre 15–24 años, con estudios secundarios, de clase social media y media–baja, estudiante no universitario, residente en poblaciones pequeñas y sigue utilizando fórmulas de pago como el contra–reembolso (23,9%). Su gasto medio anual ascendió en 2010 a 449€. El comprador constante, o comprador que ya había comprado en Internet anteriormente, tiene un perfil demográfico distinto: estudios superiores, clase alta, trabajador y residente en grandes ciudades, con un comportamiento maduro en la compra electrónica dada su mayor experiencia –utiliza con mayor intensidad canales exclusivos en Internet que no disponen de tienda presencial–. Su gasto medio duplica al observado en compradores noveles (con una media de 930€ anuales). Por tanto, los compradores constantes suponen una mayoría de los compradores con un gasto medio que dobla al comprador que ha adoptado el medio recientemente. Por consiguiente es de interés estudiar los factores que predicen que un internauta vuelva a adquirir un producto o servicio en la Red. La respuesta a esta pregunta no se ha revelado sencilla. En España, la mayoría de productos y servicios aún se adquieren de manera presencial, con una baja incidencia de las ventas a distancia como la teletienda, la venta por catálogo o la venta a través de Internet. Para dar respuesta a las preguntas planteadas se ha investigado desde distintos puntos de vista: se comenzará con un estudio descriptivo desde el punto de vista de la demanda que trata de caracterizar la situación del comercio electrónico B2C en España, poniendo el foco en las diferencias entre los compradores constantes y los nuevos compradores. Posteriormente, la investigación de modelos de adopción y continuidad en el uso de las tecnologías y de los factores que inciden en dicha continuidad –con especial interés en el comercio electrónico B2C–, permiten afrontar el problema desde la perspectiva de las ecuaciones estructurales pudiendo también extraer conclusiones de tipo práctico. Este trabajo sigue una estructura clásica de investigación científica: en el capítulo 1 se introduce el tema de investigación, continuando con una descripción del estado de situación del comercio electrónico B2C en España utilizando fuentes oficiales (capítulo 2). Posteriormente se desarrolla el marco teórico y el estado del arte de modelos de adopción y de utilización de las tecnologías (capítulo 3) y de los factores principales que inciden en la adopción y continuidad en el uso de las tecnologías (capítulo 4). El capítulo 5 desarrolla las hipótesis de la investigación y plantea los modelos teóricos. Las técnicas estadísticas a utilizar se describen en el capítulo 6, donde también se analizan los resultados empíricos sobre los modelos desarrollados en el capítulo 5. El capítulo 7 expone las principales conclusiones de la investigación, sus limitaciones y propone nuevas líneas de investigación. La primera parte corresponde al capítulo 1, que introduce la investigación justificándola desde un punto de vista teórico y práctico. También se realiza una breve introducción a la teoría del comportamiento del consumidor desde una perspectiva clásica. Se presentan los principales modelos de adopción y se introducen los modelos de continuidad de utilización que se estudiarán más detalladamente en el capítulo 3. En este capítulo se desarrollan los objetivos principales y los objetivos secundarios, se propone el mapa mental de la investigación y se planifican en un cronograma los principales hitos del trabajo. La segunda parte corresponde a los capítulos dos, tres y cuatro. En el capítulo 2 se describe el comercio electrónico B2C en España utilizando fuentes secundarias. Se aborda un diagnóstico del sector de comercio electrónico y su estado de madurez en España. Posteriormente, se analizan las diferencias entre los compradores constantes, principal interés de este trabajo, frente a los compradores noveles, destacando las diferencias de perfiles y usos. Para los dos segmentos se estudian aspectos como el lugar de acceso a la compra, la frecuencia de compra, los medios de pago utilizados o las actitudes hacia la compra. El capítulo 3 comienza desarrollando los principales conceptos sobre la teoría del comportamiento del consumidor, para continuar estudiando los principales modelos de adopción de tecnología existentes, analizando con especial atención su aplicación en comercio electrónico. Posteriormente se analizan los modelos de continuidad en el uso de tecnologías (Teoría de la Confirmación de Expectativas; Teoría de la Justicia), con especial atención de nuevo a su aplicación en el comercio electrónico. Una vez estudiados los principales modelos de adopción y continuidad en el uso de tecnologías, el capítulo 4 analiza los principales factores que se utilizan en los modelos: calidad, valor, factores basados en la confirmación de expectativas –satisfacción, utilidad percibida– y factores específicos en situaciones especiales –por ejemplo, tras una queja– como pueden ser la justicia, las emociones o la confianza. La tercera parte –que corresponde al capítulo 5– desarrolla el diseño de la investigación y la selección muestral de los modelos. En la primera parte del capítulo se enuncian las hipótesis –que van desde lo general a lo particular, utilizando los factores específicos analizados en el capítulo 4– para su posterior estudio y validación en el capítulo 6 utilizando las técnicas estadísticas apropiadas. A partir de las hipótesis, y de los modelos y factores estudiados en los capítulos 3 y 4, se definen y vertebran dos modelos teóricos originales que den respuesta a los retos de investigación planteados en el capítulo 1. En la segunda parte del capítulo se diseña el trabajo empírico de investigación definiendo los siguientes aspectos: alcance geográfico–temporal, tipología de la investigación, carácter y ambiente de la investigación, fuentes primarias y secundarias utilizadas, técnicas de recolección de datos, instrumentos de medida utilizados y características de la muestra utilizada. Los resultados del trabajo de investigación constituyen la cuarta parte de la investigación y se desarrollan en el capítulo 6, que comienza analizando las técnicas estadísticas basadas en Modelos de Ecuaciones Estructurales. Se plantean dos alternativas, modelos confirmatorios correspondientes a Métodos Basados en Covarianzas (MBC) y modelos predictivos. De forma razonada se eligen las técnicas predictivas dada la naturaleza exploratoria de la investigación planteada. La segunda parte del capítulo 6 desarrolla el análisis de los resultados de los modelos de medida y modelos estructurales construidos con indicadores formativos y reflectivos y definidos en el capítulo 4. Para ello se validan, sucesivamente, los modelos de medida y los modelos estructurales teniendo en cuenta los valores umbrales de los parámetros estadísticos necesarios para la validación. La quinta parte corresponde al capítulo 7, que desarrolla las conclusiones basándose en los resultados del capítulo 6, analizando los resultados desde el punto de vista de las aportaciones teóricas y prácticas, obteniendo conclusiones para la gestión de las empresas. A continuación, se describen las limitaciones de la investigación y se proponen nuevas líneas de estudio sobre distintos temas que han ido surgiendo a lo largo del trabajo. Finalmente, la bibliografía recoge todas las referencias utilizadas a lo largo de este trabajo. Palabras clave: comprador constante, modelos de continuidad de uso, continuidad en el uso de tecnologías, comercio electrónico, B2C, adopción de tecnologías, modelos de adopción tecnológica, TAM, TPB, IDT, UTAUT, ECT, intención de continuidad, satisfacción, confianza percibida, justicia, emociones, confirmación de expectativas, calidad, valor, PLS. ABSTRACT Information and Communication Technologies in general, but more specifically those related to the Internet in particular, have changed the way in which we communicate, relate to one another, produce, and buy and sell products, reducing the time and shortening the distance between suppliers and consumers. The steady breakthrough of computers, Smartphones and landline and/or wireless broadband has been greatly reflected in its large scale use by both individuals and businesses. Business–to–consumer (B2C) e–commerce reached a volume of 9,114 million Euros in Spain in 2010, representing a 17.4% increase with respect to the figure in 2009. This growth is due in part to two different facts: an increase in the percentage of web users to 65.1% en 2010, 43.1% of whom have acquired products or services through the Internet– which constitutes 1.6 percentage points higher than 2010. On the other hand, the average spending by individual buyers rose to 831€ en 2010, constituting a 10.9% increase with respect to the previous year. If we select buyers according to whether or not they have previously made some type of purchase, we can divide them into two categories: the novice buyer–who first made online purchases in 2010– and the experienced buyer: who also made purchases in 2010, but had done so previously as well. The socio–demographic profile of the novice buyer is that of a young person between 15–24 years of age, with secondary studies, middle to lower–middle class, and a non–university educated student who resides in smaller towns and continues to use payment methods such as cash on delivery (23.9%). In 2010, their average purchase grew to 449€. The more experienced buyer, or someone who has previously made purchases online, has a different demographic profile: highly educated, upper class, resident and worker in larger cities, who exercises a mature behavior when making online purchases due to their experience– this type of buyer frequently uses exclusive channels on the Internet that don’t have an actual store. His or her average purchase doubles that of the novice buyer (with an average purchase of 930€ annually.) That said, the experienced buyers constitute the majority of buyers with an average purchase that doubles that of novice buyers. It is therefore of interest to study the factors that help to predict whether or not a web user will buy another product or use another service on the Internet. The answer to this question has proven not to be so simple. In Spain, the majority of goods and services are still bought in person, with a low amount of purchases being made through means such as the Home Shopping Network, through catalogues or Internet sales. To answer the questions that have been posed here, an investigation has been conducted which takes into consideration various viewpoints: it will begin with a descriptive study from the perspective of the supply and demand that characterizes the B2C e–commerce situation in Spain, focusing on the differences between experienced buyers and novice buyers. Subsequently, there will be an investigation concerning the technology acceptance and continuity of use of models as well as the factors that have an effect on their continuity of use –with a special focus on B2C electronic commerce–, which allows for a theoretic approach to the problem from the perspective of the structural equations being able to reach practical conclusions. This investigation follows the classic structure for a scientific investigation: the subject of the investigation is introduced (Chapter 1), then the state of the B2C e–commerce in Spain is described citing official sources of information (Chapter 2), the theoretical framework and state of the art of technology acceptance and continuity models are developed further (Chapter 3) and the main factors that affect their acceptance and continuity (Chapter 4). Chapter 5 explains the hypothesis behind the investigation and poses the theoretical models that will be confirmed or rejected partially or completely. In Chapter 6, the technical statistics that will be used are described briefly as well as an analysis of the empirical results of the models put forth in Chapter 5. Chapter 7 explains the main conclusions of the investigation, its limitations and proposes new projects. First part of the project, chapter 1, introduces the investigation, justifying it from a theoretical and practical point of view. It is also a brief introduction to the theory of consumer behavior from a standard perspective. Technology acceptance models are presented and then continuity and repurchase models are introduced, which are studied more in depth in Chapter 3. In this chapter, both the main and the secondary objectives are developed through a mind map and a timetable which highlights the milestones of the project. The second part of the project corresponds to Chapters Two, Three and Four. Chapter 2 describes the B2C e–commerce in Spain from the perspective of its demand, citing secondary official sources. A diagnosis concerning the e–commerce sector and the status of its maturity in Spain is taken on, as well as the barriers and alternative methods of e–commerce. Subsequently, the differences between experienced buyers, which are of particular interest to this project, and novice buyers are analyzed, highlighting the differences between their profiles and their main transactions. In order to study both groups, aspects such as the place of purchase, frequency with which online purchases are made, payment methods used and the attitudes of the purchasers concerning making online purchases are taken into consideration. Chapter 3 begins by developing the main concepts concerning consumer behavior theory in order to continue the study of the main existing acceptance models (among others, TPB, TAM, IDT, UTAUT and other models derived from them) – paying special attention to their application in e–commerce–. Subsequently, the models of technology reuse are analyzed (CDT, ECT; Theory of Justice), focusing again specifically on their application in e–commerce. Once the main technology acceptance and reuse models have been studied, Chapter 4 analyzes the main factors that are used in these models: quality, value, factors based on the contradiction of expectations/failure to meet expectations– satisfaction, perceived usefulness– and specific factors pertaining to special situations– for example, after receiving a complaint justice, emotions or confidence. The third part– which appears in Chapter 5– develops the plan for the investigation and the sample selection for the models that have been designed. In the first section of the Chapter, the hypothesis is presented– beginning with general ideas and then becoming more specific, using the detailed factors that were analyzed in Chapter 4– for its later study and validation in Chapter 6– as well as the corresponding statistical factors. Based on the hypothesis and the models and factors that were studied in Chapters 3 and 4, two original theoretical models are defined and organized in order to answer the questions posed in Chapter 1. In the second part of the Chapter, the empirical investigation is designed, defining the following aspects: geographic–temporal scope, type of investigation, nature and setting of the investigation, primary and secondary sources used, data gathering methods, instruments according to the extent of their use and characteristics of the sample used. The results of the project constitute the fourth part of the investigation and are developed in Chapter 6, which begins analyzing the statistical techniques that are based on the Models of Structural Equations. Two alternatives are put forth: confirmatory models which correspond to Methods Based on Covariance (MBC) and predictive models– Methods Based on Components–. In a well–reasoned manner, the predictive techniques are chosen given the explorative nature of the investigation. The second part of Chapter 6 explains the results of the analysis of the measurement models and structural models built by the formative and reflective indicators defined in Chapter 4. In order to do so, the measurement models and the structural models are validated one by one, while keeping in mind the threshold values of the necessary statistic parameters for their validation. The fifth part corresponds to Chapter 7 which explains the conclusions of the study, basing them on the results found in Chapter 6 and analyzing them from the perspective of the theoretical and practical contributions, and consequently obtaining conclusions for business management. The limitations of the investigation are then described and new research lines about various topics that came up during the project are proposed. Lastly, all of the references that were used during the project are listed in a final bibliography. Key Words: constant buyer, repurchase models, continuity of use of technology, e–commerce, B2C, technology acceptance, technology acceptance models, TAM, TPB, IDT, UTAUT, ECT, intention of repurchase, satisfaction, perceived trust/confidence, justice, feelings, the contradiction of expectations, quality, value, PLS.

New broadband thermal noise primary standard in coaxial technology

A broadband primary standard for thermal noise measurements is presented and its thermal and electromagnetic behavior is analyzed by means of analytical and numerical simulation techniques. It consists of a broadband termination connected to a 3.5mm coaxial airline partially immersed in liquid Nitrogen. The main innovative part of the device is the thermal bead between inner and outer conductors, designed for obtaining a proper thermal contact and to keep low both its contribution to the total thermal noise and its reflectivity. A sensitivity analysis is realized in order to fix the manufacturing tolerances for a proper performance in the range 10MHz¿26.5GHz.

Analysis of noise temperature sensitivity for the design of a broadband thermal noise primary standard

A broadband primary standard for thermal noise measurements is presented and its thermal and electromagnetic behaviour is analysed by means of a novel hybrid analytical?numerical simulation methodology. The standard consists of a broadband termination connected to a 3.5mm coaxial airline partially immersed in liquid nitrogen and is designed in order to obtain a low reflectivity and a low uncertainty in the noise temperature. A detailed sensitivity analysis is made in order to highlight the critical characteristics that mostly affect the uncertainty in the noise temperature, and also to determine the manufacturing and operation tolerances for a proper performance in the range 10MHz to 26.5 GHz. Aspects such as the thermal bead design, the level of liquid nitrogen or the uncertainties associated with the temperatures, the physical properties of the materials in the standard and the simulation techniques are discussed.

On the economics of energy consumption in 4G networks: the case of Spain

Reducing energy consumption is one of the main challenges in most countries. For example, European Member States agreed to reduce greenhouse gas (GHG) emissions by 20% in 2020 compared to 1990 levels (EC 2008). Considering each sector separately, ICTs account nowadays for 2% of total carbon emissions. This percentage will increase as the demand of communication services and applications steps up. At the same time, the expected evolution of ICT-based developments - smart buildings, smart grids and smart transportation systems among others - could result in the creation of energy-saving opportunities leading to global emission reductions (Labouze et al. 2008), although the amount of these savings is under debate (Falch 2010). The main development required in telecommunication networks ?one of the three major blocks of energy consumption in ICTs together with data centers and consumer equipment (Sutherland 2009) ? is the evolution of existing infrastructures into ultra-broadband networks, the so-called Next Generation Networks (NGN). Fourth generation (4G) mobile communications are the technology of choice to complete -or supplement- the ubiquitous deployment of NGN. The risk and opportunities involved in NGN roll-out are currently in the forefront of the economic and policy debate. However, the issue of which is the role of energy consumption in 4G networks seems absent, despite the fact that the economic impact of energy consumption arises as a key element in the cost analysis of this type of networks. Precisely, the aim of this research is to provide deeper insight on the energy consumption involved in the usage of a 4G network, its relationship with network main design features, and the general economic impact this would have in the capital and operational expenditures related with network deployment and usage.

How much energy will your NGN consume? A model for energy consumption in next generation access networks: The case of Spain

The contribution to global energy consumption of the information and communications technology (ICT) sector has increased considerably in the last decade, along with its growing relevance to the overall economy. This trend will continue due to the seemingly ever greater use of these technologies, with broadband data traffic generated by the usage of telecommunication networks as a primary component. In fact, in response to user demand, the telecommunications industry is initiating the deployment of next generation networks (NGNs). However, energy consumption is mostly absent from the debate on these deployments, in spite of the potential impact on both expenses and sustainability. In addition, consumers are unaware of the energy impact of their choices in ultra-broadband services. This paper focuses on forecasting energy consumption in the access part of NGNs by modelling the combined effect of the deployment of two different ultra-broadband technologies (FTTH-GPON and LTE), the evolution of traffic per user, and the energy consumption in each of the networks and user devices. Conclusions are presented on the levels of energy consumption, their cost and the impact of different network design parameters. The effect of technological developments, techno-economic and policy decisions on energy consumption is highlighted. On the consumer side, practical figures and comparisons across technologies are provided. Although the paper focuses on Spain, the analysis can be extended to similar countries.

A water footprint assessment of a pair of jeans: the influence of agricultural policies on the sustainability of consumer products.

This study reports the results of a water footprint (WF) assessment of five types of textiles commonly used for the production of jeans, including two different fibres (cotton and Lyocell fibre) and five corresponding production methods for spinning, dyeing and weaving. The results show that the fibre production is the stage with the highest water consumption, being cotton production particularly relevant. Therefore, the study pays particular attention to the water footprint of cotton production and analyses the effects of external factors influencing the water footprint of a product, in this case, the incentives provided by the EU Common Agricultural Policy (CAP), and the relevance of agricultural practices to the water footprint of a product is emphasised. An extensification of the crop production led to higher WF per unit, but a lower overall pressure on the basins water resources. This study performs a sustainability assessment of the estimated cotton WFs with the water scarcity index, as proposed by Hoekstra et al. (2011), and shows their variations in different years as a result of different water consumption by crops in the rest of the river basin. In our case, we applied the assessment to the Guadalquivir, Guadalete and Barbate river basins, three semi-arid rivers in South Spain. Because they are found to be relevant, the available water stored in dams and the outflow are also incorporated as reference points for the sustainability assessment. The study concludes that, in the case of Spanish cotton production, the situation of the basin and the policy impact are more relevant for the status of the basin s water resources than the actual WF of cotton production. Therefore, strategies aimed at reducing the impact of the water footprint of a product need to analyse both the WF along the value chain and within the local context.

Broadband access in complex environments: LTE on railway

This paper assesses the main challenges associated with the propagation and channel modeling of broadband radio systems in a complex environment of high speed and metropolitan railways. These challenges comprise practical simulation, modeling interferences, radio planning, test trials and performance evaluation in different railway scenarios using Long Term Evolution (LTE) as test case. This approach requires several steps; the first is the use of a radio propagation simulator based on ray-tracing techniques to accurately predict propagation. Besides the radio propagation simulator, a complete test bed has been constructed to assess LTE performance, channel propagation conditions and interference with other systems in real-world environments by means of standard-compliant LTE transmissions. Such measurement results allowed us to evaluate the propagation and performance of broadband signals and to test the suitability of LTE radio technology for complex railway scenarios.

300 GHz CMOS video detection using broadband and active planar antennas

Using CMOS transistors for terahertz detection is currently a disruptive technology that offers the direct integration of a terahertz detector with video preamplifiers. The detectors are based on the resistive mixer concept and performance mainly depends on the following parameters: type of antenna, electrical parameters (gate to drain capacitor and channel length of the CMOS device) and foundry. Two different 300 GHz detectors are discussed: a single transistor detector with a broadband antenna and a differential pair driven by a resonant patch antenna.

Impact of introducing longer and heavier vehicles on regional consumer price index and Spanish road freight transport system

This paper applies an integrated modeling approach to the case of Spain; the approach is based on a random utility-based multiregional input-output model and a road transport network model for assessing the effect of introducing longer and heavier vehicles (LHVs) on the regional consumer price index (CPI) and on the transportation system. The approach strongly supports the concept that changes in transport costs derived from the LHV allowance as well as the economic structure of regions have direct and indirect effects on the economy and on the transportation system. Results show that the introduction of LHVs might reduce prices paid by consumers for a representative basket of goods and services in the regions of Spain and would also lead to a reduction in the regional CPI. In addition, the magnitude and extent of changes in the transportation system are estimated by using the commodity-based structure of the approach to identify the effect of traffic changes on traffic flows and on pollutant emissions over the whole network.

Intermediate Band Solar Cell with Extreme Broadband Spectrum Quantum Efficiency

We report, for the first time, about an intermediate band solar cell implemented with InAs/AlGaAs quantum dots whose photoresponse expands from 250 to ~ 6000  nm. To our knowledge, this is the broadest quantum efficiency reported to date for a solar cell and demonstrates that the intermediate band solar cell is capable of producing photocurrent when illuminated with photons whose energy equals the energy of the lowest band gap. We show experimental evidence indicating that this result is in agreement with the theory of the intermediate band solar cell, according to which the generation recombination between the intermediate band and the valence band makes this photocurrent detectable. © 2015 American Physical Society

Broadband active differential array for the mid-frequency SKA band

This paper presents the design and characterization process of an active array demonstrator for the mid-frequency range (i.e., 300 MHz-1000 MHz) of the future Square Kilometre Array (SKA) radio telescope. This demonstrator, called FIDA3 (FG-IGN: Fundación General Instituto Geográfico Nacional - Differential Active Antenna Array), is part of the Spanish contribution for the SKA project. The main advantages provided by this design include the use of a dielectric-free structure, and the use of a fully-differential receiver in which differential low-noise amplifiers (LNAs) are directly connected to the balanced tapered-slot antennas (TSAs). First, the radiating structure and the differential low-noise amplifiers were separately designed and measured, obtaining good results (antenna elements with low voltage standing-wave ratios, array scanning capabilities up to 45°, and noise temperatures better than 52 K with low-noise amplifiers at room temperature). The potential problems due to the differential nature of the proposed solution are discussed, so some effective methods to overcome such limitations are proposed. Second, the complete active antenna array receiving system was assembled, and a 1 m2 active antenna array tile was characterized.

Analysing the Impact of Consumer Tendency in HORECA Distribution Models

With increasing complexity of today's consumer requirements, food industry decision makers should be able to respond to consumer needs much faster than ever before. The preliminary studies showed that for improving the performance and selecting suitable distribution models, decision makers in food industries should classify different types of consumers and based on the classification prepare different distributions flows. By studying the HORECA distribution channel, this paper suggest that, logistics decision makers should investigate the relationship between consumers' characteristics and urban freight distribution strategy in order to respond to the exact needs and in the follow to reduce the logistics cost.

Cancelación activa del ruido utilizando el KIT TMS320C5515 EZDSP

El control, o cancelación activa de ruido, consiste en la atenuación del ruido presente en un entorno acústico mediante la emisión de una señal igual y en oposición de fase al ruido que se desea atenuar. La suma de ambas señales en el medio acústico produce una cancelación mutua, de forma que el nivel de ruido resultante es mucho menor al inicial. El funcionamiento de estos sistemas se basa en los principios de comportamiento de los fenómenos ondulatorios descubiertos por Augustin-Jean Fresnel, Christiaan Huygens y Thomas Young entre otros. Desde la década de 1930, se han desarrollado prototipos de sistemas de control activo de ruido, aunque estas primeras ideas eran irrealizables en la práctica o requerían de ajustes manuales cada poco tiempo que hacían inviable su uso. En la década de 1970, el investigador estadounidense Bernard Widrow desarrolla la teoría de procesado adaptativo de señales y el algoritmo de mínimos cuadrados LMS. De este modo, es posible implementar filtros digitales cuya respuesta se adapte de forma dinámica a las condiciones variables del entorno. Con la aparición de los procesadores digitales de señal en la década de 1980 y su evolución posterior, se abre la puerta para el desarrollo de sistemas de cancelación activa de ruido basados en procesado de señal digital adaptativo. Hoy en día, existen sistemas de control activo de ruido implementados en automóviles, aviones, auriculares o racks de equipamiento profesional. El control activo de ruido se basa en el algoritmo fxlms, una versión modificada del algoritmo LMS de filtrado adaptativo que permite compensar la respuesta acústica del entorno. De este modo, se puede filtrar una señal de referencia de ruido de forma dinámica para emitir la señal adecuada que produzca la cancelación. Como el espacio de cancelación acústica está limitado a unas dimensiones de la décima parte de la longitud de onda, sólo es viable la reducción de ruido en baja frecuencia. Generalmente se acepta que el límite está en torno a 500 Hz. En frecuencias medias y altas deben emplearse métodos pasivos de acondicionamiento y aislamiento, que ofrecen muy buenos resultados. Este proyecto tiene como objetivo el desarrollo de un sistema de cancelación activa de ruidos de carácter periódico, empleando para ello electrónica de consumo y un kit de desarrollo DSP basado en un procesador de muy bajo coste. Se han desarrollado una serie de módulos de código para el DSP escritos en lenguaje C, que realizan el procesado de señal adecuado a la referencia de ruido. Esta señal procesada, una vez emitida, produce la cancelación acústica. Empleando el código implementado, se han realizado pruebas que generan la señal de ruido que se desea eliminar dentro del propio DSP. Esta señal se emite mediante un altavoz que simula la fuente de ruido a cancelar, y mediante otro altavoz se emite una versión filtrada de la misma empleando el algoritmo fxlms. Se han realizado pruebas con distintas versiones del algoritmo, y se han obtenido atenuaciones de entre 20 y 35 dB medidas en márgenes de frecuencia estrechos alrededor de la frecuencia del generador, y de entre 8 y 15 dB medidas en banda ancha. ABSTRACT. Active noise control consists on attenuating the noise in an acoustic environment by emitting a signal equal but phase opposed to the undesired noise. The sum of both signals results in mutual cancellation, so that the residual noise is much lower than the original. The operation of these systems is based on the behavior principles of wave phenomena discovered by Augustin-Jean Fresnel, Christiaan Huygens and Thomas Young. Since the 1930’s, active noise control system prototypes have been developed, though these first ideas were practically unrealizable or required manual adjustments very often, therefore they were unusable. In the 1970’s, American researcher Bernard Widrow develops the adaptive signal processing theory and the Least Mean Squares algorithm (LMS). Thereby, implementing digital filters whose response adapts dynamically to the variable environment conditions, becomes possible. With the emergence of digital signal processors in the 1980’s and their later evolution, active noise cancellation systems based on adaptive signal processing are attained. Nowadays active noise control systems have been successfully implemented on automobiles, planes, headphones or racks for professional equipment. Active noise control is based on the fxlms algorithm, which is actually a modified version of the LMS adaptive filtering algorithm that allows compensation for the acoustic response of the environment. Therefore it is possible to dynamically filter a noise reference signal to obtain the appropriate cancelling signal. As the noise cancellation space is limited to approximately one tenth of the wavelength, noise attenuation is only viable for low frequencies. It is commonly accepted the limit of 500 Hz. For mid and high frequencies, conditioning and isolating passive techniques must be used, as they produce very good results. The objective of this project is to develop a noise cancellation system for periodic noise, by using consumer electronics and a DSP development kit based on a very-low-cost processor. Several C coded modules have been developed for the DSP, implementing the appropriate signal processing to the noise reference. This processed signal, once emitted, results in noise cancellation. The developed code has been tested by generating the undesired noise signal in the DSP. This signal is emitted through a speaker simulating the noise source to be removed, and another speaker emits an fxlms filtered version of the same signal. Several versions of the algorithm have been tested, obtaining attenuation levels around 20 – 35 dB measured in a tight bandwidth around the generator frequency, or around 8 – 15 dB measured in broadband.

Design of broadband transmitarray unit cells with comparative study of different numbers of layers

A generalized methodology to design low-profile transmitarray (TA) antennas made of several stacked layers with nonresonant printed phasing elements is presented. A study of the unit cell bandwidth, phase-shift range and tolerances has been conducted considering different numbers of layers. A structure with three metalized layers with capacitive and inductive elements enabling a phase range of nearly 360° and low insertion loss is introduced. A study of the four-layer structure shows improvement in the performance of the unit cells in terms of bandwidth from 2% to more than 20% and a complete phase coverage. Implementations on a flexible substrate of TAs with progressive phase shift operating at 19 GHz are used for validation.