Novel Inductor‐less Conversion Strategy Based on Multiphase Transformer‐Coupled Converters: Analysis, Design and Applications

There are many the requirements that modern power converters should fulfill. Most of the applications where these converters are used, demand smaller converters with high efficiency, improved power density and a fast dynamic response. For instance, loads like microprocessors demand aggressive current steps with very high slew rates (100A/mus and higher); besides, during these load steps, the supply voltage of the microprocessor should be kept within tight limits in order to ensure its correct performance. The accomplishment of these requirements is not an easy task; complex solutions like advanced topologies - such as multiphase converters- as well as advanced control strategies are often needed. Besides, it is also necessary to operate the converter at high switching frequencies and to use capacitors with high capacitance and low ESR. Improving the dynamic response of power converters does not rely only on the control strategy but also the power topology should be suited to enable a fast dynamic response. Moreover, in later years, a fast dynamic response does not only mean accomplishing fast load steps but output voltage steps are gaining importance as well. At least, two applications that require fast voltage changes can be named: Low power microprocessors. In these devices, the voltage supply is changed according to the workload and the operating frequency of the microprocessor is changed at the same time. An important reduction in voltage dependent losses can be achieved with such changes. This technique is known as Dynamic Voltage Scaling (DVS). Another application where important energy savings can be achieved by means of changing the supply voltage are Radio Frequency Power Amplifiers. For example, RF architectures based on ‘Envelope Tracking’ and ‘Envelope Elimination and Restoration’ techniques can take advantage of voltage supply modulation and accomplish important energy savings in the power amplifier. However, in order to achieve these efficiency improvements, a power converter with high efficiency and high enough bandwidth (hundreds of kHz or even tens of MHz) is necessary in order to ensure an adequate supply voltage. The main objective of this Thesis is to improve the dynamic response of DC-DC converters from the point of view of the power topology. And the term dynamic response refers both to the load steps and the voltage steps; it is also interesting to modulate the output voltage of the converter with a specific bandwidth. In order to accomplish this, the question of what is it that limits the dynamic response of power converters should be answered. Analyzing this question leads to the conclusion that the dynamic response is limited by the power topology and specifically, by the filter inductance of the converter which is found in series between the input and the output of the converter. The series inductance is the one that determines the gain of the converter and provides the regulation capability. Although the energy stored in the filter inductance enables the regulation and the capability of filtering the output voltage, it imposes a limitation which is the concern of this Thesis. The series inductance stores energy and prevents the current from changing in a fast way, limiting the slew rate of the current through this inductor. Different solutions are proposed in the literature in order to reduce the limit imposed by the filter inductor. Many publications proposing new topologies and improvements to known topologies can be found in the literature. Also, complex control strategies are proposed with the objective of improving the dynamic response in power converters. In the proposed topologies, the energy stored in the series inductor is reduced; examples of these topologies are Multiphase converters, Buck converter operating at very high frequency or adding a low impedance path in parallel with the series inductance. Control techniques proposed in the literature, focus on adjusting the output voltage as fast as allowed by the power stage; examples of these control techniques are: hysteresis control, V 2 control, and minimum time control. In some of the proposed topologies, a reduction in the value of the series inductance is achieved and with this, the energy stored in this magnetic element is reduced; less stored energy means a faster dynamic response. However, in some cases (as in the high frequency Buck converter), the dynamic response is improved at the cost of worsening the efficiency. In this Thesis, a drastic solution is proposed: to completely eliminate the series inductance of the converter. This is a more radical solution when compared to those proposed in the literature. If the series inductance is eliminated, the regulation capability of the converter is limited which can make it difficult to use the topology in one-converter solutions; however, this topology is suitable for power architectures where the energy conversion is done by more than one converter. When the series inductor is eliminated from the converter, the current slew rate is no longer limited and it can be said that the dynamic response of the converter is independent from the switching frequency. This is the main advantage of eliminating the series inductor. The main objective, is to propose an energy conversion strategy that is done without series inductance. Without series inductance, no energy is stored between the input and the output of the converter and the dynamic response would be instantaneous if all the devices were ideal. If the energy transfer from the input to the output of the converter is done instantaneously when a load step occurs, conceptually it would not be necessary to store energy at the output of the converter (no output capacitor COUT would be needed) and if the input source is ideal, the input capacitor CIN would not be necessary. This last feature (no CIN with ideal VIN) is common to all power converters. However, when the concept is actually implemented, parasitic inductances such as leakage inductance of the transformer and the parasitic inductance of the PCB, cannot be avoided because they are inherent to the implementation of the converter. These parasitic elements do not affect significantly to the proposed concept. In this Thesis, it is proposed to operate the converter without series inductance in order to improve the dynamic response of the converter; however, on the other side, the continuous regulation capability of the converter is lost. It is said continuous because, as it will be explained throughout the Thesis, it is indeed possible to achieve discrete regulation; a converter without filter inductance and without energy stored in the magnetic element, is capable to achieve a limited number of output voltages. The changes between these output voltage levels are achieved in a fast way. The proposed energy conversion strategy is implemented by means of a multiphase converter where the coupling of the phases is done by discrete two-winding transformers instead of coupledinductors since transformers are, ideally, no energy storing elements. This idea is the main contribution of this Thesis. The feasibility of this energy conversion strategy is first analyzed and then verified by simulation and by the implementation of experimental prototypes. Once the strategy is proved valid, different options to implement the magnetic structure are analyzed. Three different discrete transformer arrangements are studied and implemented. A converter based on this energy conversion strategy would be designed with a different approach than the one used to design classic converters since an additional design degree of freedom is available. The switching frequency can be chosen according to the design specifications without penalizing the dynamic response or the efficiency. Low operating frequencies can be chosen in order to favor the efficiency; on the other hand, high operating frequencies (MHz) can be chosen in order to favor the size of the converter. For this reason, a particular design procedure is proposed for the ‘inductorless’ conversion strategy. Finally, applications where the features of the proposed conversion strategy (high efficiency with fast dynamic response) are advantageus, are proposed. For example, in two-stage power architectures where a high efficiency converter is needed as the first stage and there is a second stage that provides the fine regulation. Another example are RF power amplifiers where the voltage is modulated following an envelope reference in order to save power; in this application, a high efficiency converter, capable of achieving fast voltage steps is required. The main contributions of this Thesis are the following: The proposal of a conversion strategy that is done, ideally, without storing energy in the magnetic element. The validation and the implementation of the proposed energy conversion strategy. The study of different magnetic structures based on discrete transformers for the implementation of the proposed energy conversion strategy. To elaborate and validate a design procedure. To identify and validate applications for the proposed energy conversion strategy. It is important to remark that this work is done in collaboration with Intel. The particular features of the proposed conversion strategy enable the possibility of solving the problems related to microprocessor powering in a different way. For example, the high efficiency achieved with the proposed conversion strategy enables it as a good candidate to be used for power conditioning, as a first stage in a two-stage power architecture for powering microprocessors.

Estrategias de desarrollo sostenible de la arquitectura del oasis de M’hamid, desierto del Sahara

Esta investigación se plantea con la hipótesis radical de cómo habitar el desierto de forma sostenible, desde una actitud pragmática y experimental basada en el progreso. La justificación se basa en primer lugar en los 2.000 millones de personas en el mundo que viven en entornos desérticos, el 80% de ellas, en países en desarrollo, porque el 40% de la superficie terrestre está bajo amenaza de desertificación afectando al 37% de la población mundial, con 12 millones de hectáreas al año perdidas por esa causa, y por último, porque se considera el desierto como un entorno de gran atractivo y potencial. El contenido de la investigación se estructura en tres movimientos: posicionamiento, mirada y acción: Desde el posicionamiento se define en primer lugar la sostenibilidad, aportando un nuevo diagrama donde se incorpora el ámbito arquitectónico como uno de los pilares principales, y, posteriormente, se establecen los criterios de evaluación de la sostenibilidad, aportando un sistema de indicadores donde se incorporan parámetros adecuados a las circunstancias del oasis. Del mismo modo, se estudian y analizan metodologías de actuación y proyectos de desarrollo sostenible existentes que enmarcan el estado del arte, constatando la dificultad de adaptación de los mismos a las condiciones de los oasis, por lo que se elabora una metodología propia donde se modifica la dinámica estratégica, de forma que el impulso se plantea desde la acción social, a través de hipótesis de estrategias basadas en sistemas low-cost, autoconstruidas, asumibles económicamente y de implantación factible. El caso de estudio específico radica en la situación extrema de las condiciones en el oasis de M’hamid, donde se evidencia un proceso de desintegración y abandono. Esto es debido a una acumulación de circunstancias externas e internas, de múltiples factores: naturales y antrópicos que afectan al oasis, llevando al extremo las condiciones climáticas y la escasez de recursos, naturales y artificiales. Factores como el cambio climático, la sequía, los cambios en las políticas del agua, la amenaza de desertificación, los conflictos sociales, el desequilibrio ecológico, la escasez económica, la crisis energética, la obsolescencia arquitectónica, el patrimonio construido prácticamente destruido, y la malentendida nueva arquitectura. Es importante constatar la escasa documentación gráfica existente sobre la zona de actuación lo que ha conllevado un amplio trabajo de documentación, tanto cartográfica como de observación directa, aportada a la tesis como investigación de elaboración propia. La mirada analítica al caso de estudio permite conocer los recursos disponibles y las potencialidades latentes del oasis de M’hamid, que permitirán actuar para subvertir la dinámica involutiva imperante, de forma que los dibujos iniciales de apropiación contextual y análisis críticos derivan en mapas de acción diagramados conformados por un sistema de objetos y la definición de estrategias transversales, deconstruyendo el pasado y reconstruyendo el futuro, incorporando sistemas alternativos que se definen en 7 líneas estratégicas de acción formuladas desde los 3 ámbitos relacionados con el ecosistema: ecológico, socio- económico y arquitectónico. Así, la tesis defiende la acción arquitectónica como impulsora del desarrollo sostenible, apoyada en 3 elementos: - la creación de objetos “tecnoartesanos”, para el aprovechamiento de los recursos energéticos - las transformaciones arquitectónicas, para reformular el hábitat desde la eficiencia energética y el progreso - y el impulso de acciones cotidianas, que redefinan las relaciones sociales, creando entornos cooperativos y colaborativos. En el ámbito ecológico se proponen actuaciones anti desertificación mediante incubadoras de árboles; sistemas alternativos de gestión del agua, como la lluvia sólida; estrategias de potenciación de la producción agrícola; la construcción de mecanismos de obtención de energía a partir de residuos, como los paneles solares con botellas PET. En el ámbito socioeconómico se plantean nuevas formas de acción social y de reactivación económica. Por último, en el ámbito urbano-arquitectónico, se incorporan modificaciones morfológicas a la arquitectura existente y una relectura contemporánea de la tierra, como material que permite nuevas geometrías, obteniendo arena petrificada por procesos microbiológicos, y potenciando la tierra como recurso artístico. Esta tesis es un punto de partida, recoge sistemas, estrategias y experiencias, para funcionar como un estímulo o impulso dinamizador del futuro desarrollo sostenible del oasis, abriendo vías de investigación y experimentación. ABSTRACT This research puts forth the radical hypothesis of how to inhabit the desert in a sustainable way, using a pragmatic and experimental approach based on progress. The justification for this resides in the fact that there are 2,000 million people in the world living in desert environments, 80% of them in developing countries. Forty percent of the earth’s surface is under threat of desertification, affecting 37% of the world population and with 12 million hectares being lost each year. And finally, the desert is considered as an attractive environment and therefore, with great potential. The content of the research is structured in three main sections: positioning, observation and action: As a point of departure, sustainability is defined, proposing a new framework where architecture is incorporated as one of the main pillars. Then, the criteria for evaluating sustainability are established. These provide a system of indicators, which incorporate parameters based on the specific circumstances of the oasis. Methodologies and existing sustainable development projects that represent the state-of-the-art are analyzed, discussing the difficulty of adapting them to conditions of oases. A methodology that modifies strategic concepts is developed, whereby the catalyst is social action, and strategies are developed based on low-cost, self-built, and feasible implementation systems. The specific case study lies in the extreme conditions in the oasis of M'hamid, where a process of decay and neglect is evident. This deterioration is due to an accumulation of external and internal circumstances, and of natural and anthropogenic factors that affect the oasis, leading to extreme weather conditions and a shortage of both natural and artificial resources. Factors include; climate change, drought, changes in water policies, the threat of desertification, social conflicts, ecological imbalance, economic shortage, the energy crisis, architectural obsolescence, destruction of built heritage, and misunderstood new architecture. It is important to note the extremely limited graphic information about the area has led me to produce an extensive archive of maps and drawings, many developed by direct observation, that contribute to the research. The case study analysis of the oasis of M'hamid examines the resources available and the latent potential to slow the prevailing trend towards deterioration. The initial drawings of contextual appropriation and critical analysis result in maps and diagrams of action, which are formed by a system of objects and the definition of strategies. These can be thought of as understanding or “deconstructing” the past to reconstruct the future. Alternative approaches defined in seven strategies for action are based on three fields related to the ecosystem: ecological, socioeconomic and architectural. Thus, the thesis defends architectural action to promote sustainable development, based on three elements: - The creation of "techno-artisans", to make use of energy resources - Architectural changes, to reformulate habitat in terms of energy efficiency and progress - And the promotion of everyday actions, to redefine social relations, creating cooperative and collaborative environments. In the ecological field, I propose anti-desertification actions such as; tree incubators, alternative water management systems(such as solid rain),; strategies to empower the agricultural production, energy from low-cost systems made out from recycled materials(such as solar panels from PET bottles or wind turbine from bicycle wheels). In the socioeconomic sphere, I propose to implement new forms of social action and economic regeneration. Finally, within the urban and architectural field, I propose morphological changes to the existing architecture and a contemporary reinterpretation of the earth as a material that allows new geometries, creating petrified sand by microbiological processes or enhancing nature as an artistic and energy resource. This thesis is a starting point. It collects systems, strategies and experiences to serve as a stimulus or dynamic momentum for future sustainable development of the oasis, opening new avenues of research and experimentation. RÉSUMÉ Cette recherche part d'une hypothèse radicale : comment habiter le désert de façon durable, et ce à partir d'une approche pragmatique et expérimentale basée sur le progrès. Cette hypothèse se justifie en raison des 2 milliards de personnes qui dans le monde habitent des environnements désertiques, 80% d'entre eux dans des pays en voie de développement, mais aussi parce que 40% de la surface de la planète est sous menace de désertification, un phénomène affectant 37% de la population mondiale et qui cause la perte de 12 millions d'hectares par an; et enfin parce que le désert est considéré comme un environnement très attrayant et fort d’un grand potentiel. Le contenu de la recherche se divise en trois mouvements: le positionnement, le regard et l'action : Du point de vue du positionnement on définit tout d'abord la durabilité, présentant un nouveau schéma où le domaine de l'architecture devient un des principaux piliers, et, par la suite, des critères d'évaluation de la durabilité sont établis, en fournissant un système d’indicateurs qui intègre les paramètres appropriés aux circonstances de l'oasis. De même, des méthodologies et des projets de développement durable existants sont étudiés et analysés, ce qui encadre l'état de l'art, remarquant la difficulté de les adapter aux conditions des oasis. De cette difficulté découle l'élaboration d'une méthodologie qui modifie la dynamique stratégique, de sorte que l'impulsion provient de l'action sociale, à travers des hypothèses de stratégie basées sur des systèmes low-cost, auto-construits, et de mise en oeuvre économiquement viable. Le cas d'étude spécifique réside en la situation extrême des conditions de l'oasis de M’hamid, où un processus de décadence et de négligence est évident. Cela est dû à une accumulation de circonstances externes et internes, de multiples facteurs: les facteurs naturels et anthropiques qui affectent l'oasis, menant à l'extrême les conditions météorologiques et la pénurie de ressources, autant naturelles qu'artificielles. Des facteurs tels que le changement climatique, la sécheresse, les changements dans les politiques de l'eau, la menace de la désertification, les conflits sociaux, le déséquilibre écologique, la pénurie économique, la crise de l'énergie, l'obsolescence architecturale, le patrimoine bâti pratiquement détruit et une mauvais compréhensif de la nouvelle architecture. Il est important de de faire remarquer le peu d'informations graphiques du domaine d'action, ce qui a conduit à un vaste travail de documentation, autant cartographique que relative à l'observation directe. Cette documentation s'ajoute à la thèse en tant que recherche propre. Le regard analytique sur le cas d'étude permet de connaître les ressources disponibles et le potentiel latent de l'oasis de M’hamid, qui agiront pour renverser la dynamique d'involution en vigueur. Ainsi, les premiers dessins d'appropriation contextuelle et analyse critique deviennent des cartes d'action schématisées formées par un système d'objets et la définition de stratégies transversales, qui déconstruisent le passé et reconstruisent l'avenir, en incorporant des systèmes alternatifs qui se définissent sur 7 lignes stratégiques d'action formulées à partir des 3 domaines en relation avec l’écosystème: l’écologique, le socio-économique et l'architectural. Ainsi, la thèse défend l'action architecturale en tant que promotrice du développement durable, et ce basé sur 3 éléments: - la création d'objets "technoartisans" pour l'exploitation des ressources énergétiques - les modifications architecturales, pour reformuler l'habitat du point de vue de l'efficacité énergétique et le progrès - et la promotion des actions quotidiennes, pour redéfinir les relations sociales, et la création d'environnements de coopération et collaboration. Dans le domaine de l'écologie des actions de lutte contre la désertification sont proposées à travers des pépinières d'arbres, des systèmes alternatifs de gestion de l'eau comme par exemple la pluie solide, des stratégies de mise en valeur de la production agricole, la construction de mécanismes de production d'énergie à partir de résidus, tels que les panneaux solaires ou les bouteilles en PET. Dans le domaine socio-économique, l'on propose de nouvelles formes d'action sociale et de reprise économique. Enfin, dans le domaine de l'urbain et de l'architectural, on incorpore des changements morphologiques à l'architecture existante et une relecture contemporaine de la terre, comme matériau qui permet de nouvelles géométries, en obtenant du sable pétrifié par des procédés microbiologiques et en mettant en valeur la terre comme une ressource artistique. Cette thèse n'est qu'un point de départ. Elle recueille des systèmes, des stratégies et des expériences pour servir de stimulus ou d'impulsion dynamisatrice du futur développement durable de l'oasis, en ouvrant des voies de recherche et d'expérimentation.