Comparison of Boost-Based MPPT Topologies for Space Applications

Several boost-derived topologies are analyzed and compared for an aerospace application that uses a 100 V voltage bus. All these topologies have been designed and optimized considering the electrical requirements and the reduced number of space-qualified components. The comparison evaluates the power losses, mass, and dynamic response. Special attention has been paid to those topologies that may cancel the inherent right half plane zero (RHP) zero of the boost topology. Experimental results of the less common topologies are presented.

Using pMOS Pass-Gates to Boost SRAM Performance by Exploiting Strain Effects in Sub-20-nm FinFET Technologies

Strained fin is one of the techniques used to improve the devices as their size keeps reducing in new nanoscale nodes. In this paper, we use a predictive technology of 14 nm where pMOS mobility is significantly improved when those devices are built on top of long, uncut fins, while nMOS devices present the opposite behavior due to the combination of strains. We explore the possibility of boosting circuit performance in repetitive structures where long uncut fins can be exploited to increase fin strain impact. In particular, pMOS pass-gates are used in 6T complementary SRAM cells (CSRAM) with reinforced pull-ups. Those cells are simulated under process variability and compared to the regular SRAM. We show that when layout dependent effects are considered the CSRAM design provides 10% to 40% faster access time while keeping the same area, power, and stability than a regular 6T SRAM cell. The conclusions also apply to 8T SRAM cells. The CSRAM cell also presents increased reliability in technologies whose nMOS devices have more mismatch than pMOS transistors.

Towards a Transfer Model of Scientific and Technological Knowledge: the Case of Mexico

This paper shows the development of a science-technological knowledge transfer model in Mexico, as a means to boost the limited relations between the scientific and industrial environments. The proposal is based on the analysis of eight organizations (research centers and firms) with varying degrees of skill in the practice of science-technological knowledge transfer, and carried out by the case study approach. The analysis highlights the synergistic use of the organizational and technological capabilities of each organization, as a means to identification of the knowledge transfer mechanisms best suited to enabling the establishment of cooperative processes, and achieve the R&D and innovation activities results.

Detection and Tracking of Traffic Signs Using a Recursive Bayesian Decision Framework

In this paper we propose a new method for the automatic detection and tracking of road traffic signs using an on-board single camera. This method aims to increase the reliability of the detections such that it can boost the performance of any traffic sign recognition scheme. The proposed approach exploits a combination of different features, such as color, appearance, and tracking information. This information is introduced into a recursive Bayesian decision framework, in which prior probabilities are dynamically adapted to tracking results. This decision scheme obtains a number of candidate regions in the image, according to their HS (Hue-Saturation). Finally, a Kalman filter with an adaptive noise tuning provides the required time and spatial coherence to the estimates. Results have shown that the proposed method achieves high detection rates in challenging scenarios, including illumination changes, rapid motion and significant perspective distortion

Auto component supply chain: a path to global India

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to maximize total profitability.’ After 1950, supply chain management got a boost with the production and manufacturing sector getting highest attention. The inventory became the responsibility of the marketing, accounting and production areas. Order processing was part of accounting and sales. Supply chain management became one of the most powerful engines of business transformation. It is the one area where operational efficiency can be gained. It reduces organizations costs and enhances customer service. With the liberalization of world trade, globalization, and emergence of the new markets, many organizations have customers and competitions throughout the world, either directly or indirectly. Business communities are aware that global competitiveness is the key to the success of a business. Competitiveness is ability to produce, distribute and provide products and services for the open market in competition with others. The supply chain, a critical link between supplier, producer and customer is emerged now as an essential business process and a strategic lever, potential value contributor a differentiator for the success of any business. Supply chain management is the management of all internal and external processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through logistics delivery.). Goods-either in raw form or processed, whole sale or retailed distribution, business or technology services, in everyday life- in the business or household- directly or indirectly supply chain is ubiquitously associated in expanding socio-economic development. Supply chain growth competitive performance and supporting strong growth impulse at micro as well as micro economic levels. Keeping the India vision at the core of the objective, the role of supply chain is to take up social economic challenges, improve competitive advantages, develop strategies, built capabilities, enhance value propositions, adapt right technology, collaborate with stakeholders and deliver environmentally sustainable outcomes with minimum resources.

Digital Control Implementation to Reduce the Cost and Improve the Performance of the Control Stage of an Industrial Switched-Mode Power Supply

The main objective of this work is the design and implementation of the digital control stage of a 280W AC/DC industrial power supply in a single low-cost microcontroller to replace the analog control stage. The switch-mode power supply (SMPS) consists of a PFC boost converter with fixed frequency operation and a variable frequency LLC series resonant DC/DC converter. Input voltage range is 85VRMS-550VRMS and the output voltage range is 24V-28V. A digital controller is especially suitable for this kind of SMPS to implement its multiple functionalities and to keep the efficiency and the performance high over the wide range of input voltages. Additional advantages of the digital control are reliability and size. The optimized design and implementation of the digital control stage it is presented. Experimental results show the stable operation of the controlled system and an estimation of the cost reduction achieved with the digital control stage.

Water harvesting for young trees using Peltier plates powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, it uses the electricity at the moment in which air humidity and temperature are optima to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system, rather than irrigating young plants in such a degree as to boost their growth, is to maintain them alive in the dryer periods.

Excitación y control de IGBTs de un inversor trifásico sinusoidal

El origen del proyecto se encuentra en la mejora de un inversor trifásico sinusoidal comercial sobre la base del estudio de las técnicas de excitación óptimas para los IGBTs que lo componen en su etapa de potencia. En las primeras fases de planteamiento del proyecto se propone una idea mucho más ambiciosa, la realización de un nuevo convertidor de emergencia, destinado al sector ferroviario, para dar servicio de climatización. Este convertidor está formado por la asociación en cascada de un bloque DC/DC elevador y un bloque inversor DC/AC trifásico controlado mediante PWM con modulación sinusoidal. Se pretendía así dar solución a las siguientes problemáticas detectadas en los convertidores comercializados hasta el momento: un bloque elevador excesivamente sobredimensionado, subsistemas de control independientes para los dos bloques que configuran el convertidor, adicionalmente, la tarjeta driver se rediseña con cada cambio de especificaciones por parte de un nuevo cliente y finalmente, las comunicaciones tanto de diagnosis como de mantenimiento necesitaban una importante actualización. Inicialmente, se ha realizado un estudio teórico de los bloques elevador e inversor para poder realizar el diseño y dimensionamiento de sus componentes tanto semiconductores como electromagnéticos. Una vez completada la parte de potencia, se estudia el control que se realiza mediante medidas directas y simulación tanto de la estrategia de control del elevador como del inversor. Así se obtiene una información completa de la funcionalidad de las tarjetas existentes. Se desea realizar el diseño de una única tarjeta controladora y una única tarjeta de drivers para ambos bloques. Por problemas ajenos, en el transcurso de este proyecto se cancela su realización comercial, con lo que se decide al menos crear la placa de control y poder gobernar un convertidor ya existente, sustituyendo la tarjeta de control del bloque elevador. Para poder fabricar la placa de control se divide en dos tarjetas que irán conectadas en modo sándwich. En una tarjeta está el microcontrolador y en otra está todo el interface necesario para operar con el sistema: entradas y salidas digitales, entradas y salidas analógicas, comunicación CAN, y un pequeño DC/DC comercial que proporciona alimentación al prototipo. Se realiza un pequeño programa funcional para poder manejar el convertidor, el cual con una tensión de 110V DC, proporciona a la salida una tensión de 380V AC. Como ya se ha expuesto, debido a la cancelación del proyecto industrial no se profundiza más en su mejora y se decide proponerlo para su evaluación en su fase actual. ABSTRACT. The beginning of the project is found in the improvement of a commercial sine wave three phase inverter which is based in a study about optimal excitation techniques to IGBTs which compose in the power stage. In the early phases of project it is proposed a much more ambitious idea, the fact of a new emergency converter, proposed for the rail sector to work in an air condition unit. This converter is formed by an association of a block cascaded DC/DC booster and a block DC/AC inverter three-phase controlled by a sine wave modulation PWM. The purposed was to give a solution to following problems detected in commercial converters nowadays: an excessively oversized block boost, independent control subsystems for two blocks that configure the converter. In addition, driver board is redesigned with each specifications change demand it a new customer, and finally, the communications, diagnostic and maintenance that needed a important upgrade. Initially, it has been performed a theoretical study of boost and the inverter blocks to be able to perform the component’s design and the size (semiconductor and electromagnetic fields). Once finished power study, it is analysed the control performed using direct measures and simulation of boost control strategy and inverter. With this it is obtained complete information about existing cards functionality. The project is looking for the design of just one controller card and one drivers´ card for both blocks. By unrelated problems, during the course of this project a commercial realization. So at least its decided to create control board to be able to existing converter, replacing boost block’s control board. To be able to manufacture control board it is divided in two cards connected in sandwiching mode. In a card is microcontroller and in another is all needed interface to operate with the system: digital inputs and outputs, analogical inputs and outputs, CAN communication, and a small DC / DC business that provide power supply to the prototype. It is performed a small functional program to handle the converter, which with an input voltage 110V DC provides an output voltage 380V AC. As already has been exposed, due to industrial project cancellation it is decided no to continue with all improvements and directly to evaluate it in the current phase.

Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, uses the electricity at the moment in which air humidity and temperature are optimal to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system is to sustain young plants in drier periods, rather than exclusively irrigating young plants to boost their growth.

Diseño de una Metodología de Política Pública de I+D+i para el Desarrollo de la Capacidad de la Innovación en el Sector PYMIS del estado Bolívar, Venezuela

El estado Bolívar con una superficie de 238.000 Km2 se encuentra ubicado al SE de Venezuela y su capital es Ciudad Bolívar. Ocupa el 26,24% de la superficie del territorio nacional. Ciudad Guayana es la principal región del desarrollo económico del estado siendo sede de las empresas básicas de los sectores siderúrgicos y del aluminio que se encargan de la extracción, procesamiento y transformación del mineral de hierro y de la transformación de la bauxita en aluminio primario. Además, cuenta con un gran potencial hidroeléctrico, garantizando el suministro de energía eléctrica para el funcionamiento de las empresas básicas, para el parque industrial de la región, así como para el desarrollo industrial, económico y social de la nación. Con relación al sector de la industria del mineral de hierro y del aluminio, las empresas destinan más del 60 por ciento de su producción al mercado internacional. A pesar de que el sector de las Pequeñas y Medianas Industrias (PYMIS) del estado Bolívar cuenta con un mercado cercano y seguro, no se le ha propiciado un desarrollo integral en términos de orientar sus esfuerzos en innovar en nuevos productos o mejoras de procesos. Debido a la falta del personal de investigación calificado, la escasa vinculación con centros de investigación, la baja inversión en investigación, desarrollo tecnológico e innovación (I+D+i), la ausencia de la aplicación de una política pública de I+D+i y la desarticulación de los miembros del Sistema Regional de Innovación (SRI), constituyen los principales obstáculos para generar bienes y servicios con un alto valor agregado. Esta situación desequilibra y hace ineficiente el funcionamiento del SRI. La baja capacidad de las PYMIS del estado Bolívar en I+D+i, es una situación que impide generar por si sola nuevos productos o procesos para satisfacer las demandas del mercado regional. Por lo tanto, se requiere de la intervención y participación activa de la institución gubernamental responsable del diseño y aplicación de una política pública de I+D+i para dinamizar la capacidad de innovación en las PYMIS, en su articulación y vinculación con los miembros del SRI. xiii El presente proyecto se planteó como objetivo diseñar una metodología de política pública de I+D+i para liderar, coordinar y direccionar el SRI del estado Bolívar, para el desarrollo de la capacidad de innovación en el sector industrial y específicamente en las PYMIS. La presente tesis representa una investigación no experimental de tipo proyectivo que analiza la situación actual del Sistema Regional de Innovación del estado Bolívar. El análisis de los resultados se ha dividido en tres fases. En la primera se realizan diagnósticos por medio de encuestas de las PYMIS en materia de I+D+i, de los centros y laboratorios de investigación pertenecientes a las universidades de la región en el área de Materiales y de los sectores financieros público y privado. En dichas encuestas se evalúa el nivel de integración con los entes gubernamentales que definen y administran la política pública de I+D+i. En la segunda fase, con el diagnóstico y procesamiento de los resultados de la primera fase, se procede a desarrollar un análisis de las fortalezas, oportunidades, debilidades y amenazas (FODA) del Sistema Regional de Innovación, permitiendo comprender la situación actual de la relación y vinculación de las PYMIS con los centros de investigación, instituciones financieras y entes gubernamentales. Con la problemática detectada, resultó necesario el diseño de estrategias y un modelo de gestión de política pública de I+D+i para la articulación de los miembros del SRI, para el apoyo de las PYMIS. En la tercera fase se diseña la metodología de política pública de I+D+i para fortalecer la innovación en las PYMIS. La metodología se representa a través de un modelo propuesto que se relaciona con las teorías de los procesos de innovación, con los modelos de sistemas de innovación y con las reflexiones y recomendaciones hechas por diferentes investigadores e instituciones de cooperación internacional referentes a la aplicación de políticas públicas de I+D+i para dinamizar la capacidad de innovación en el sector industrial. La metodología diseñada es comparada con diferentes modelos de aplicación de política pública de I+D+i. Cada modelo se representa en una figura y se analiza su xiv situación presente y la función que desempeña el ente gubernamental en la aplicación del enfoque de política pública de I+D+i. El diseño de la metodología de política pública de I+D+i propuesta aportará nuevos conocimientos y podrá ser aplicado para apoyar el progreso de la I+D+i en las PYMIS de la región, como caso de estudio, con el fin de impulsar una economía más competitiva y reducir el grado de dependencia tecnológica. La metodología una vez evaluada podrá ser empleada en el contexto de la gran industria y en otras regiones de Venezuela y además, puede aplicarse en otros países con características similares en su tejido industrial. En la tesis doctoral se concluye que el desarrollo de la capacidad de innovación en las PYMIS depende del diseño y aplicación de la política pública de I+D+i como elemento dinamizador y articulador del SRI del estado Bolívar. xv ABSTRACT The Bolivar state with an area of 238,000 km2 is located in the SE of Venezuela and its capital is Ciudad Bolivar. It occupies a surface which is 26.24% of the national territory. Ciudad Guayana is the main area of the state's economic development and the location of the corporate headquarters of the basic steel and aluminum sectors that are responsible for the extraction, processing and transformation of iron ore and bauxite processing for primary aluminum. It also has a great hydroelectric potential, ensuring the supply of electricity for the operation of enterprises, for the regional industrial park as well as for the industrial, economic and social development of the nation. With regard to the iron ore and aluminum industry, companies allocate more than 60 percent of their production to the international market. Although the sector of Small and Medium Industries (SMIs) of the Bolivar state has a secure market, it has not been led to an integral development in terms of targeting its efforts on innovating new products or improving processes. Due to the lack of qualified research staff, poor links with research centers, low investment in research, technological development and innovation (R & D & I), the absence of the implementation of a public policy for R & D & I and the dismantling of the members of the Regional Innovation System (RIS), are the main obstacles to generate goods and services with high added value. This situation makes the RIS unbalanced and inefficient. The low capacity of Bolivar state’s SMIs in R & D & I, is a situation that cannot generate by itself new products or processes to meet regional market demands. Therefore, it requires the active involvement and participation of the government institution responsible for the design and implementation of R & D & I public policy to boost the innovation capacity in SMIs, through the connection and integration with members of the RIS. This project is intended to design a methodology aimed at public policy for R & D & I to lead, coordinate and direct the RIS of Bolivar state, for the development of innovation capacity in the industrial sector and specifically in the SMIs. xvi This thesis is an experimental investigation of projective type which analyzes the current situation of the Regional Innovation System of the Bolivar state. The analysis of the results is divided into three phases. In the first one, a diagnosis is performed through surveys of SMIs in R & D & I centers and research laboratories belonging to the universities of the region in the area of materials and public and private financial sectors. In such surveys the level of integration with government agencies that define and manage the public policy of R & D & I is assessed. In the second phase, with the diagnosis and processing of the results of the first phase, we proceed to develop an analysis of the strengths, weaknesses, opportunities and threats (SWOT) of the Regional Innovation System, allowing the comprehension of the current status of the relationship of SMIs with research centers, financial institutions and government agencies. With the problems identified it was necessary to design strategies and a model of public policy management of R & D & I for the articulation of the members of the RIS, to support the SMIs. In the third phase a public policy methodology for R & D & I is designed in order to strengthen innovation in SMIs. The methodology is shown through a proposed model that relates to the theories of the innovation process, with models of innovation systems and with the discussions and recommendations made by different researchers and institutions of international cooperation concerning the implementation of policies public for R & D & I to boost innovation capacity in the industrial sector. The methodology designed is compared with different models of public policy implementation for R & D & I. Each model is represented in a figure and its current situation and the role of the government agency in the implementation of the public policy approach to R & D & I is analyzed. The design of the proposed public policy methodology for R & D & I will provide new knowledge and can be applied to support the progress of R & D & I in the region’s SMIs, as a case study, in order to boost a more competitive economy and reduce the degree of technological dependence. After being evaluated the methodology can be used in the context of big industry and in other regions of Venezuela and can also be applied in other countries with similar characteristics in their industrial structure. xvii The thesis concludes that the development of the innovation capacity in SMIs depends on the design and implementation of the public policy for R & D & I as a catalyst and coordination mechanism of the Regional Innovation System of the Bolivar state.

Integración de Fuentes con Información de Contexto y Sistemas Interactivos

Durante el transcurso de esta Tesis Doctoral se ha realizado un estudio de la problemática asociada al desarrollo de sistemas de interacción hombre-máquina sensibles al contexto. Este problema se enmarca dentro de dos áreas de investigación: los sistemas interactivos y las fuentes de información contextual. Tradicionalmente la integración entre ambos campos se desarrollaba a través de soluciones verticales específicas, que abstraen a los sistemas interactivos de conocer los procedimientos de bajo nivel de acceso a la información contextual, pero limitan su interoperabilidad con otras aplicaciones y fuentes de información. Para solventar esta limitación se hace imprescindible potenciar soluciones interoperables que permitan acceder a la información del mundo real a través de procedimientos homogéneos. Esta problemática coincide perfectamente con los escenarios de \Computación Ubicua" e \Internet de las Cosas", donde se apunta a un futuro en el que los objetos que nos rodean serán capaces de obtener información del entorno y comunicarla a otros objetos y personas. Los sistemas interactivos, al ser capaces de obtener información de su entorno a través de la interacción con el usuario, pueden tomar un papel especial en este escenario tanto como consumidores como productores de información. En esta Tesis se ha abordado la integración de ambos campos teniendo en cuenta este escenario tecnológico. Para ello, en primer lugar se ha realizado un an álisis de las iniciativas más importantes para la definición y diseño de sistemas interactivos, y de las principales infraestructuras de suministro de información. Mediante este estudio se ha propuesto utilizar el lenguaje SCXML del W3C para el diseño de los sistemas interactivos y el procesamiento de los datos proporcionados por fuentes de contexto. Así, se ha reflejado cómo las capacidades del lenguaje SCXML para combinar información de diferentes modalidades pueden también utilizarse para procesar e integrar información contextual de diferentes fuentes heterogéneas, y por consiguiente diseñar sistemas de interacción sensibles al contexto. Del mismo modo se presenta a la iniciativa Sensor Web, y a su extensión semántica Semantic Sensor Web, como una iniciativa idónea para permitir un acceso y suministro homogéneo de la información a los sistemas interactivos sensibles al contexto. Posteriormente se han analizado los retos que plantea la integración de ambos tipos de iniciativas. Como resultado se ha conseguido establecer una serie de funcionalidades que son necesarias implementar para llevar a cabo esta integración. Utilizando tecnologías que aportan una gran flexibilidad al proceso de implementación y que se apoyan en recomendaciones y estándares actuales, se implementaron una serie de desarrollos experimentales que integraban las funcionalidades identificadas anteriormente. Finalmente, con el fin de validar nuestra propuesta, se realizaron un conjunto de experimentos sobre un entorno de experimentación que simula el escenario de la conducción. En este escenario un sistema interactivo se comunica con una extensión semántica de una plataforma basada en los estándares de la Sensor Web para poder obtener información y publicar las observaciones que el usuario realizaba al sistema. Los resultados obtenidos han demostrado la viabilidad de utilizar el lenguaje SCXML para el diseño de sistemas interactivos sensibles al contexto que requieren acceder a plataformas avanzadas de información para consumir y publicar información a la vez que interaccionan con el usuario. Del mismo modo, se ha demostrado cómo la utilización de tecnologías semánticas en los procesos de consulta y publicación de información puede facilitar la reutilización de la información publicada en infraestructuras Sensor Web por cualquier tipo de aplicación, y de este modo contribuir al futuro escenario de Internet de las Cosas. ABSTRACT In this Thesis, we have addressed the difficulties related to the development of context-aware human-machine interaction systems. This issue is part of two research fields: interactive systems and contextual information sources. Traditionally both fields have been integrated through domain-specific vertical solutions that allow interactive systems to access contextual information without having to deal with low-level procedures, but restricting their interoperability with other applications and heterogeneous data sources. Thus, it is essential to boost the research on interoperable solutions that provide access to real world information through homogeneous procedures. This issue perfectly matches with the scenarios of \Ubiquitous Computing" and \Internet of Things", which point toward a future in which many objects around us will be able to acquire meaningful information about the environment and communicate it to other objects and to people. Since interactive systems are able to get information from their environment through interaction with the user, they can play an important role in this scenario as they can both consume real-world data and produce enriched information. This Thesis deals with the integration of both fields considering this technological scenario. In order to do this, we first carried out an analysis of the most important initiatives for the definition and design of interactive systems, and the main infrastructures for providing information. Through this study the use of the W3C SCXML language is proposed for both the design of interactive systems and the processing of data provided by different context sources. Thus, this work has shown how the SCXML capabilities for combining information from different modalities can also be used to process and integrate contextual information from different heterogeneous sensor sources, and therefore to develope context-aware interaction systems. Similarly, we present the Sensor Web initiative, and its semantic extension Semantic Sensor Web, as an appropriate initiative to allow uniform access and delivery of information to the context-aware interactive systems. Subsequently we have analyzed the challenges of integrating both types of initiatives: SCXML and (Semantic) Sensor Web. As a result, we state a number of functionalities that are necessary to implement in order to perform this integration. By using technologies that provide exibility to the implementation process and are based on current recommendations and standards, we implemented a series of experimental developments that integrate the identified functionalities. Finally, in order to validate our approach, we conducted different experiments with a testing environment simulating a driving scenario. In this framework an interactive system can access a semantic extension of a Telco plataform, based on the standards of the Sensor Web, to acquire contextual information and publish observations that the user performed to the system. The results showed the feasibility of using the SCXML language for designing context-aware interactive systems that require access to advanced sensor platforms for consuming and publishing information while interacting with the user. In the same way, it was shown how the use of semantic technologies in the processes of querying and publication sensor data can assist in reusing and sharing the information published by any application in Sensor Web infrastructures, and thus contribute to realize the future scenario of \Internet of Things".

Sistemas de pago emergentes con móvil

Los sistemas de pago con móvil son una alternativa de pago a los medios de pago electrónicos tradicionales que están siendo cada vez más utilizados en nuestra sociedad. Son varios los factores que han llevado a la utilización de esta forma alternativa de pago. Los terminales móviles se han convertido en una herramienta casi vital para la sociedad, lo cual ha contribuido a una gran aceptación y desarrollo de los terminales móviles que cada vez cuentan con más funcionalidades. Gracias a esto, las comunicaciones móviles también están en constante evolución y ello ha influido notablemente para que se puedan desarrollar nuevos servicios e implementar nuevas funcionalidades en los terminales móviles. Por otro lado, la tendencia de los usuarios a usar cada día más los sistemas de pago electrónicos, intentando en la medida de lo posible prescindir del dinero en efectivo, también es un factor que ha permitido impulsar el desarrollo de este tipo de sistema de pagos emergentes. En el otro lado se encuentra el mundo empresarial, donde por un lado están las empresas de telecomunicaciones que no quieren dejar escapar esta oportunidad de negocio y están invirtiendo dinero para desarrollar nuevas infraestructuras que permitan el pago con móvil, y por otro lado se encuentran las entidades financieras que son necesarias para poder llevar a cabo los pagos a través del móvil, y por tanto tienen que formar parte de la solución llegando a los acuerdos necesarios con los proveedores de servicios. En este trabajo se realiza un análisis de las diferentes plataformas de pago por móvil existentes en la actualidad, prestando especial atención a los aspectos que tienen que ver con la seguridad y la disponibilidad y acceso de la información bancaria del usuario. Asimismo también se analiza la arquitectura de cada plataforma como su funcionamiento, aclarando la interacción y el papel que juegan las diferentes partes implicadas. Para ello hay un capítulo dedicado a la seguridad donde se presentan conceptos y protocolos que son aplicados en las soluciones de pagos electrónicos, y una descripción de los sistemas de pago electrónicos más usados actualmente, los cuales presentan muchas similitudes con los sistemas de pago con móvil. Por último se recogen diferentes experiencias llevadas a cabo en nuestro país de pagos con móvil, destacando la experiencia de los usuarios así como el método empleado. ABSTRACT. Mobile payment systems are payment methods alternative to traditional electronic payment ones that are being increasingly used in our society. Several factors have led to the use of this alternative form of payment. Mobile terminals have become almost a vital tool for society, which has contributed to a wide acceptance and development of mobile terminals that are getting more features all the time. As a result, mobile communications are also evolving and they have had such a great influence that they have developed new services and implemented new features in mobile terminals. What is more, the growing tendency among users to use electronic payment systems, trying to make their payments whithout cash as often as possible, is also a factor that has allowed the boost the development of such emerging payment systems. The other partner of these systems is the business world, where on one hand, the telecommunication companies that do not want to miss this business opportunity are investing funds to develop new infrastructures which enable the mobile payment, and on the other hand, the financial institutions that are necessary to carry out payments via mobile, and therefore need to be part of the solution reaching the necessary agreements with service providers, want their own saying and their own share of the potential profits. This report is an analysis of the different mobile payment platforms existing today, with particular attention to the aspects that have to do with security and the availability and acces of user’s bank information. Likewise, it also analyzes the architecture of each platform and its operation and interaction procedures, clarifying the role of the different parties involved. Previously there is a chapter that presents security concepts and protocols that are applied in electronic payment solutions, and a description of the electronic trade systems most widely used currently, which have many similarities with mobile payment systems. Finally, it shows different experiments carried out in our country of mobile payments, highlighting the experience of users as well as the method used.

Business model with discount incentive in a P2P-cloud multimedia streaming system

Today P2P faces two important challenges: design of mechanisms to encourage users' collaboration in multimedia live streaming services; design of reliable algorithms with QoS provision, to encourage the multimedia providers employ the P2P topology in commercial live streaming systems. We believe that these two challenges are tightly-related and there is much to be done with respect. This paper analyzes the effect of user behavior in a multi-tree P2P overlay and describes a business model based on monetary discount as incentive in a P2P-Cloud multimedia streaming system. We believe a discount model can boost up users' cooperation and loyalty and enhance the overall system integrity and performance. Moreover the model bounds the constraints for a provider's revenue and cost if the P2P system is leveraged on a cloud infrastructure. Our case study shows that a streaming system provider can establish or adapt his business model by applying the described bounds to achieve a good discount-revenue trade-off and promote the system to the users.

A novel monetary incentive for commercial P2P streaming

Today P2P faces two important challenges: design of mechanisms to encourage users’ collaboration in multimedia live streaming services; design of reliable algorithms with QoS provision, to encourage multimedia providers employ the P2P topology in commercial streaming services. We believe that these two challenges are tightly-related and there is much to be done with respect. This paper proposes a novel monetary incentive for P2P multimedia streaming. The incentive model classifies the users in groups according to the perceived video quality. We apply the model to a streaming system’s billing model in order to evaluate its feasibility and visualize its quantitative effect on the users’ motivation and the provider’s profit. We conclude that monetary incentive can boost up users’ cooperation, loyalty and enhance the overall system integrity and performance. Moreover the model defines the constraints for the provider’s cost and profit when the system is leveraged on the cloud. Considering those constraints, a multimedia content provider can adapt the billing model of his streaming service and achieve desirable discount-profit trade-off. This will moreover contribute to better promotion of the service, across the users on the Internet.

Self-organized colloidal quantum dots and metal nanoparticles for plasmon-enhanced intermediate-band solar cells

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude. In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance. The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.