An Analysis Of The Recommended Knowledge For The Software Project Management Discipline

According to the PMBOK (Project Management Body of Knowledge), project management is “the application of knowledge, skills, tools, and techniques to project activities to meet the project requirements” [1]. Project Management has proven to be one of the most important disciplines at the moment of determining the success of any project [2][3][4]. Given that many of the activities covered by this discipline can be said that are “horizontal” for any kind of domain, the importance of acknowledge the concepts and practices becomes even more obvious. The specific case of the projects that fall in the domain of Software Engineering are not the exception about the great influence of Project Management for their success. The critical role that this discipline plays in the industry has come to numbers. A report by McKinsey & Co [4] shows that the establishment of programs for the teaching of critical skills of project management can improve the performance of the project in time and costs. As an example of the above, the reports exposes: “One defense organization used these programs to train several waves of project managers and leaders who together administered a portfolio of more than 1,000 capital projects ranging in Project management size from $100,000 to $500 million. Managers who successfully completed the training were able to cut costs on most projects by between 20 and 35 percent. Over time, the organization expects savings of about 15 percent of its entire baseline spending”. In a white paper by the PMI (Project Management Institute) about the value of project management [5], it is stated that: “Leading organizations across sectors and geographic borders have been steadily embracing project management as a way to control spending and improve project results”. According to the research made by the PMI for the paper, after the economical crisis “Executives discovered that adhering to project management methods and strategies reduced risks, cut costs and improved success rates—all vital to surviving the economic crisis”. In every elite company, a proper execution of the project management discipline has become a must. Several members of the software industry have putted effort into achieving ways of assuring high quality results from projects; many standards, best practices, methodologies and other resources have been produced by experts from different fields of expertise. In the industry and the academic community, there is a continuous research on how to teach better software engineering together with project management [4][6]. For the general practices of Project Management the PMI produced a guide of the required knowledge that any project manager should have in their toolbox to lead any kind of project, this guide is called the PMBOK. On the side of best practices 10 and required knowledge for the Software Engineering discipline, the IEEE (Institute of Electrical and Electronics Engineers) developed the SWEBOK (Software Engineering Body of Knowledge) in collaboration with software industry experts and academic researchers, introducing into the guide many of the needed knowledge for a 5-year expertise software engineer [7]. The SWEBOK also covers management from the perspective of a software project. This thesis is developed to provide guidance to practitioners and members of the academic community about project management applied to software engineering. The way used in this thesis to get useful information for practitioners is to take an industry-approved guide for software engineering professionals such as the SWEBOK, and compare the content to what is found in the PMBOK. After comparing the contents of the SWEBOK and the PMBOK, what is found missing in the SWEBOK is used to give recommendations on how to enrich project management skills for a software engineering professional. Recommendations for members of the academic community on the other hand, are given taking into account the GSwE2009 (Graduated Software Engineering 2009) standard [8]. GSwE2009 is often used as a main reference for software engineering master programs [9]. The standard is mostly based on the content of the SWEBOK, plus some contents that are considered to reinforce the education of software engineering. Given the similarities between the SWEBOK and the GSwE2009, the results of comparing SWEBOK and PMBOK are also considered valid to enrich what the GSwE2009 proposes. So in the end the recommendations for practitioners end up being also useful for the academic community and their strategies to teach project management in the context of software engineering.

In situ conversion of protochlorophyllide b to protochlorophyllide a in barley. Evidence for a novel role of 7-formyl reductase in the prolamellar body of etioplasts

We recently put forth a model of a protochlorophyllide (Pchlide) light-harvesting complex operative during angiosperm seedling de-etiolation (Reinbothe, C., Lebedev, N., and Reinbothe, S. (1999) Nature 397, 80–84). This model, which was based on in vitro reconstitution experiments with zinc analogs of Pchlide a and Pchlide b and the two NADPH:protochlorophyllide oxidoreductases (PORs), PORA and PORB, of barley, predicted a 5-fold excess of Pchlide b, relative to Pchlide a, in the prolamellar body of etioplasts. Recent work (Scheumann, V., Klement, H., Helfrich, M., Oster, U., Schoch, S., and Rüdiger, W. (1999) FEBS Lett. 445, 445–448), however, contradicted this model and reported that Pchlide b would not be present in etiolated plants. Here we demonstrate that Pchlide b is an abundant pigment in barley etioplasts but is rather metabolically unstable. It is rapidly converted to Pchlide a by virtue of 7-formyl reductase activity, an enzyme that had previously been implicated in the chlorophyll (Chl) b to Chl a reaction cycle. Our findings suggest that etiolated plants make use of 7-formyl reductase to fine tune the levels of Pchlide b and Pchlidea and thereby may regulate the steady-state level of light-harvesting POR-Pchlide comple

Impact of knowledge brokering on performance heterogeneity among business models

Purpose – The strategic management literature lacks a comprehensive explanation as to why seemingly similar business models in the same industry perform differently. This paper strives to explain this phenomenon. Design/methodology/approach – The model is conceptualized and accompanied by a case study on the airline industry to explain knowledge brokerage that creates value from the effective utilization of knowledge resources acquired from intra- and inter-firm environments. Findings – The model explains a cyclical view of business model flexibility in which the knowledge-based resource accumulation of the business model is spread across the intra- and inter-firm environments. Knowledge brokerage strategies from the inter- and intra-firm environments result in improved performance of the business model. The flexibility that the business model acquires is determined by how efficiently resource accumulation is aligned with its external environment. Originality/value – The paper effectively integrates the concepts of knowledge brokerage and business models from a resource accumulation-based view and simultaneously arrives at the performance heterogeneity of seemingly similar business models within the same industry. It has performance implications for firms that start out without any distinct resources of their own, or that use an imitated business model, to attain better performance through business model evolution aligned with successful knowledge brokerage strategies. It adds to the resource accumulation literature by explaining how resources can be effectively acquired to create value.

Knowledge representation tool for cognitiveprocesses modeling

In the last decades, neuropsychological theories tend to consider cognitive functions as a result of the whole brainwork and not as individual local areas of its cortex. Studies based on neuroimaging techniques have increased in the last years, promoting an exponential growth of the body of knowledge about relations between cognitive functions and brain structures [1]. However, so fast evolution make complicated to integrate them in verifiable theories and, even more, translated in to cognitive rehabilitation. The aim of this research work is to develop a cognitive process-modeling tool. The purpose of this system is, in the first term, to represent multidimensional data, from structural and functional connectivity, neuroimaging, data from lesion studies and derived data from clinical intervention [2][3]. This will allow to identify consolidated knowledge, hypothesis, experimental designs, new data from ongoing studies and emerging results from clinical interventions. In the second term, we pursuit to use Artificial Intelligence to assist in decision making allowing to advance towards evidence based and personalized treatments in cognitive rehabilitation. This work presents the knowledge base design of the knowledge representation tool. It is compound of two different taxonomies (structure and function) and a set of tags linking both taxonomies at different levels of structural and functional organization. The remainder of the abstract is organized as follows: Section 2 presents the web application used for gathering necessary information for generating the knowledge base, Section 3 describes knowledge base structure and finally Section 4 expounds reached conclusions.

Brain injury MRI simulator based on theoretical models of neuroanatomic damage

In order to improve the body of knowledge about brain injury impairment is essential to develop image database with different types of injuries. This paper proposes a new methodology to model three types of brain injury: stroke, tumor and traumatic brain injury; and implements a system to navigate among simulated MRI studies. These studies can be used on research studies, to validate new processing methods and as an educational tool, to show different types of brain injury and how they affect to neuroanatomic structures.

Neuroanatomic-based detection algorithm for automatic labeling of brain structures in brain injury

The number and grade of injured neuroanatomic structures and the type of injury determine the degree of impairment after a brain injury event and the recovery options of the patient. However, the body of knowledge and clinical intervention guides are basically focused on functional disorder and they still do not take into account the location of injuries. The prognostic value of location information is not known in detail either. This paper proposes a feature-based detection algorithm, named Neuroanatomic-Based Detection Algorithm (NBDA), based on SURF (Speeded Up Robust Feature) to label anatomical brain structures on cortical and sub-cortical areas. Themain goal is to register injured neuroanatomic structures to generate a database containing patient?s structural impairment profile. This kind of information permits to establish a relation with functional disorders and the prognostic evolution during neurorehabilitation procedures.

The Role of Knowledge Modeling Techniques in Software Development: A General Approach Based on a Knowledge Management Tool

The aim of the paper is to discuss the use of knowledge models to formulate general applications. First, the paper presents the recent evolution of the software field where increasing attention is paid to conceptual modeling. Then, the current state of knowledge modeling techniques is described where increased reliability is available through the modern knowledge acquisition techniques and supporting tools. The KSM (Knowledge Structure Manager) tool is described next. First, the concept of knowledge area is introduced as a building block where methods to perform a collection of tasks are included together with the bodies of knowledge providing the basic methods to perform the basic tasks. Then, the CONCEL language to define vocabularies of domains and the LINK language for methods formulation are introduced. Finally, the object oriented implementation of a knowledge area is described and a general methodology for application design and maintenance supported by KSM is proposed. To illustrate the concepts and methods, an example of system for intelligent traffic management in a road network is described. This example is followed by a proposal of generalization for reuse of the resulting architecture. Finally, some concluding comments are proposed about the feasibility of using the knowledge modeling tools and methods for general application design.

Application of knowledge engineering acquisition techniques to requirements capture: a case study

In this paper we want to point out, by means of a case study, the importance of incorporating some knowledge engineering techniques to the processes of software engineering. Precisely, we are referring to the knowledge eduction techniques. We know the difficulty of requirements acquisition and its importance to minimise the risks of a software project, both in the development phase and in the maintenance phase. To capture the functional requirements use cases are generally used. However, as we will show in this paper, this technique is insufficient when the problem domain knowledge is only in the "experts? mind". In this situation, the combination of the use case with eduction techniques, in every development phase, will let us to discover the correct requirements.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.

Outsourcing and acquisition models comparison related to IT supplier selection decision analysis

This paper presents a comparison of acquisition models related to decision analysis of IT supplier selection. The main standards are: Capability Maturity Model Integration for Acquisition (CMMI-ACQ), ISO / IEC 12207 Information Technology / Software Life Cycle Processes, IEEE 1062 Recommended Practice for Software Acquisition, the IT Infrastructure Library (ITIL) and the Project Management Body of Knowledge (PMBOK) guide. The objective of this paper is to compare the previous models to find the advantages and disadvantages of them for the future development of a decision model for IT supplier selection.

La planta Miralles: representación y pensamiento en la arquitectura de Enric Miralles

Resulta imposible disociar la evolución de la arquitectura de Enric Miralles de lo que fue el desarrollo de un sistema de representación propio. Partiendo de una posición heredada de su formación en la Escuela de Arquitectura de Barcelona y de su práctica en el estudio Viaplana-Piñón, donde adquiere el gusto por la precisión en el dibujo técnico, la delineación sobre papel vegetal o el grafismo constituido exclusivamente a base de líneas del mismo grosor, Miralles pronto evoluciona hacia un método caracterizado por un personal uso del sistema diédrico, vinculado a una concepción fragmentaria de la planta de arquitectura y del espacio mismo. Miralles proyectará por fragmentos de planta, asignándoles una geometría característica para diferenciarlos entre sí y desarrollar su espacialidad y sección con cierta autonomía, a través de planos y maquetas independientes. Gran parte de la arquitectura que elabora con Carme Pinós, en solitario o con Benedetta Tagliabue, estará compuesta por colecciones de piezas heterogéneas herederas de los fragmentos de la planta original, que encajan entre sí no en base a esquemas clásicos de integración subordinada o jerárquica, sino a través de posiciones relativas de yuxtaposición o superposición, caracterizadas por una ausencia de compacidad en la solución de conjunto. Este sistema de representación se apoya por tanto en la geometría como mecanismo de diferenciación por piezas, se basa en la fragmentación del diédrico desde la fragmentación de la planta, y en la falta de compacidad como soporte de pensamiento separativo. Un sistema que se define como “planta Miralles”, término que incluye todas las técnicas de representación empleadas por el arquitecto, desde planos a maquetas, pero que enfatiza la importancia estratégica de la planta como origen y guía del proyecto de arquitectura. La tesis se estructura en los tres primeros capítulos como un corolario de las categorías enunciadas, explicando, en orden cronológico a través de los proyectos, la evolución de la geometría, la utilización del diédrico, y el impacto de la falta de compacidad en la obra construida. Mientras que estos capítulos son globales, se refieren a la trayectoria de este método en su totalidad, el cuarto y último es un estudio de detalle de su aplicación en un proyecto particular, el Ayuntamiento de Utrecht, a través de los dibujos originales de Miralles. Tanto en la explicación global como en el estudio de detalle de este sistema de representación, la tesis pone de manifiesto su instrumentalidad en el pensamiento de esta arquitectura, argumentando que ésta no podría haber sido desarrollada sin la existencia del mismo. La relación entre representación y pensamiento es por tanto un tema capital para explicar esta obra. No obstante, hasta la fecha, las referencias al mismo en la bibliografía disponible no han pasado de ser una colección de opiniones dispersas, incapaces de construir por sí mismas un cuerpo estructurado y coherente de conocimiento. Se ha insistido sobremanera en el análisis y contextualización de los proyectos individuales, y poco en el estudio de la técnica proyectual utilizada para pensarlos y llevarlos a cabo. En definitiva, se han priorizado los resultados frente a los procesos creativos, existiendo por tanto un inexplicable vacío teórico respecto a un tema de gran importancia. Este vacío es el marco donde se inserta la necesidad de esta tesis doctoral. La investigación que aquí se presenta explica el origen y evolución del sistema de representación de Enric Miralles, desde su etapa como estudiante en la Escuela de Arquitectura de Barcelona hasta los últimos proyectos que elabora con Benedetta Tagliabue, así como el estudio de sus consecuencias en la obra construida. Termina concluyendo que su desarrollo es paralelo al de la arquitectura de Miralles, poniendo de manifiesto su vinculación y mutua interdependencia. ABSTRACT It is impossible to dissociate the evolution of the architecture of Enric Miralles from the development of his own system of representation. Starting from a position inherited from his training at the Barcelona School of Architecture and his practice at the office of Viaplana-Piñón, where he acquires a liking for precision in drafting and a graphic style based exclusively on lines of the same thickness, Miralles soon moves into a method defined by a customized use of the dihedral system, connected to a fragmented conception of the floorplan and space itself. Breaking up the floorplan into multiple fragments, Miralles will design an architecture where each of them has a unique shape and geometry, developing their sections and spatial qualities with a certain degree of autonomy within the whole, through separate plans and models. Many of the projects he designs with Carme Pinós, individually or with Benedetta Tagliabue, will consist of collections of heterogeneous pieces, heirs of the original floorplan fragments, which do not fit together according to classical principles of subordinate or hierarchical integration, but based on relative positions of juxtaposition or superposition that lead to a lack of compactness in the overall scheme. This system of representation is thus based on the use of geometry as a way of differentiating architectural pieces, on the fragmentation of the dihedral system from the fragmentation of the floorplan, and on a lack of compactness as a device of separative thinking. This system is defined as “Miralles plan”, a term that includes all techniques of representation used by the architect, from plans to models, and that emphasizes the particular importance of the floorplan as the guiding force of the design process. The first three chapters of the thesis have been structured as a corollary of these categories, explaining, in chronological order through Miralles’ projects, the evolution of geometry, the customization of the dihedral system, and the impact of the lack of compactness on the built work. While these three chapters are global, for they refer to the overall evolution of this system, the fourth and last one is a case study of its application to a particular project, the Utrecht Town Hall, through Miralles’ original drawings. Both in the global and particular explanations of this system of representation, the thesis highlights its instrumentality in the process of thinking this architecture, arguing that it could not have been designed without its parallel development. The relationship between thinking and representation is therefore a key issue to explain this architecture. However, to date, existing references to it in the available literature have not evolved from a collection of scattered opinions, unable to build for themselves a structured and coherent body of knowledge. Great emphasis has been put on the critical contextualization of this architecture through the analysis of the projects themselves, but little on the study of the design technique used to think and carry them out. Results have been prioritized over creative processes, existing therefore an inexplicable theoretical void on an issue of great importance. This void is the conceptual framework where the need for this thesis is inserted. This research explains the origin and evolution of Enric Miralles’ system of representation, from his time as student at the Barcelona School of Architecture to the last projects he designed with Benedetta Tagliabue, as well as the study of its impact on the built work. It concludes that the development of this system runs parallel to that of the architecture it is used for, making it explicit its indissolubility and mutual interdependence.

La metáfora. Herramienta característica de renovación arquitectónica tras el movimiento moderno

Esta tesis estudia el papel de la metáfora como instrumento arquitectónico en el debate y las propuestas para superar la ortodoxia de la arquitectura moderna a partir de mediados del siglo XX. En arquitectura, la utilización del procedimiento que constituye la metáfora se apoya en una consideración semántica de la arquitectura y se ha usado constantemente a lo largo de la historia para desarrollar nuevas propuestas, basándose en la comparación con modelos conocidos. En este trabajo se examina la notable presencia que adquirió este instrumento en las propuestas críticas a la arquitectura moderna ortodoxa, debido a la importancia que tuvieron los aspectos semánticos en el debate sobre la continuidad y vigencia de los postulados de la arquitectura moderna. Con este estudio se ha indagado sobre las razones y la frecuencia con las que aquellos arquitectos que adoptaron una actitud crítica hacia la arquitectura moderna se refirieron a las relaciones metafóricas en sus propuestas alternativas. Para mostrar cómo las metáforas formaron parte de los mecanismos de cambio de la arquitectura en este periodo, recuperando un mayor potencial creativo para abordar los proyectos arquitectónicos, se han estudiado una serie de ejemplos pertinentes y relevantes. En cada uno de los capítulos se han analizado las objeciones más importantes que fueron planteadas frente a la arquitectura moderna por un arquitecto o grupo de arquitectos, seleccionados entre aquéllos que tomaron parte en este debate, y se estudia la inclusión de la metáfora en las alternativas que propusieron en cada caso. Además de una actitud crítica con la arquitectura moderna, todos los arquitectos seleccionados comparten una consideración semántica de la arquitectura y han expuesto sus ideas y posturas tanto en obras proyectadas y construidas, como en escritos o comentarios sobre su manera de entender y proyectar arquitectura. Esta doble producción ha permitido analizar, comparativamente, el papel de la metáfora en sus enfoques y propuestas críticas y en la realización de sus obras como alternativas a las mismas. Al mismo tiempo, la investigación profundiza en el conocimiento de la utilización de la metáfora como herramienta arquitectónica. A través del recorrido por las distintas maneras de entender este instrumento que pueden observarse en algunos de los arquitectos de la segunda mitad del siglo XX, se exponen tanto las posibilidades como los aspectos más críticos de la utilización de la metáfora en arquitectura. La variada utilización de la noción de metáfora en arquitectura se ve reflejada en las diversas consideraciones que hacen de la misma los arquitectos estudiados. La tesis se ha ocupado de distinguir cada uno de estos enfoques, haciéndose eco de la pluralidad con la que puede abordarse el concepto de metáfora de manera general y en arquitectura en particular. Así, algunos arquitectos del Team 10, la utilizan como un instrumento de ampliación y renovación semántica de la arquitectura moderna, que propone una síntesis de lo viejo y lo nuevo. Para Robert Venturi, se trata de un recurso con capacidad de persuadir y recrear, renovando semánticamente la arquitectura. Charles Jencks considera que es un procedimiento semántico esencial de la arquitectura, olvidado por los arquitectos modernos, cuya recuperación supone un rasgo diferencial de la arquitectura posmoderna respecto a la moderna. Para Aldo Rossi, es una manera de materializar las relaciones analógicas que constituyen su propuesta para proyectar una arquitectura de racionalismo exaltado frente a un racionalismo convencional. Peter Eisenman la valora porque inventa otras arquitecturas diferentes a las preconcebidas anteriormente, a pesar de que rechaza su capacidad representativa y expresiva. Rafael Moneo la utiliza para contraponerse al determinismo, como instrumento de innovación de la forma arquitectónica que construye una dinámica entre la contingencia y la necesidad. Finalmente, para Frank Gehry supone un procedimiento creativo y subjetivo con el que enfrentarse tanto a la arquitectura moderna como a la posmoderna con una arquitectura nueva y abierta a referencias inusuales. De esta manera, a través de los distintos capítulos, el estudio pretende componer un mosaico de posturas que manifieste los vínculos y las diferencias existentes entre estos arquitectos con relación a los temas estudiados: crítica y alternativas a la arquitectura moderna, semántica de la arquitectura, metáfora y otros conceptos relacionados. A su vez, la aparición continuada de la metáfora en los diferentes capítulos, y de los temas con los que está relacionada, manifiesta el protagonismo de esta herramienta arquitectónica en las propuestas de evolución y cambio de la arquitectura del periodo estudiado. ABSTRACT This thesis studies the role of the metaphor as an architectural tool in the debate and proposals to overcome the orthodoxy of modern architecture that took place since the middle part of the Twentieth Century. In architecture, the usage of the process which the metaphor constitutes is based in a semantic consideration of architecture and historically it has been used many times to develop new proposals, always based in the comparison with known models. This work examines the significant presence that this tool acquired in the proposals critical with orthodox modern architecture, due to the importance that the semantic aspects had in the debate on the continuity and validity of modern architecture’s postulates. This study also looks into the motives and frequency that those architects which adopted a critical attitude towards modern architecture alluded to the metaphorical relations in their alternative proposals. To demonstrate how during that period metaphors were imbued in the mechanisms of change of architecture, recovering a higher creative potential to approach architectural projects, a series of pertinent and relevant examples are studied. Each chapter examines the most important objections on modern architecture made by an architect or group of architects, selected among those who participated in this debate, and studies the inclusion of metaphor in the alternatives proposed in each case. Besides a critical attitude towards modern architecture, all the selected architects share a semantic consideration of architecture and have exposed their ideas and postures through projected and finalized works as in writings or commentaries on their way of understanding and projecting architecture. This double production allowed to analyse, in a comparatively manner, the role of metaphor in their approaches and critical proposals as in the execution of their works. At the same time, the research conducted further analyses the body of knowledge on the usage of metaphor as an architectural tool. By looking over the different ways some of the architects of the second half of the Twentieth Century understood this tool, both the possibilities and the most critical aspects of the usage of the metaphor in architecture can be exposed. The various usages of the notion of metaphor in architecture are reflected in the multiple considerations done about it by the selected architects. This thesis differentiates each one of those approaches, echoing the plurality with which the concept of metaphor can be addressed both in broader terms and more particularly in architecture. In this sense, some architects of Team 10 used it as a mean of semantic extension and renewal of modern architecture, proposing a synthesis between the old and the new. For Robert Venturi it is a resource with the capacity to persuade and recreate, semantically renewing architecture. Charles Jencks considers it an essential semantic procedure of architecture, forgotten by the modern architects, and which recovery represents a differential trait of post-modern architecture in relation to modern architecture. For Aldo Rossi, is a way of materializing the analogical relations which represent his proposal to project architecture of exalted rationalism as opposed to a more conventional rationalism. Peter Eisenman values it because it invents other architectures different from the preconceived before, even if he refuses its representational and expressive capacity. Rafael Moneo uses it to counter determinism, as an innovation tool of the architectonical form which generates dynamics between contingency and necessity. Finally, for Frank Gehry it supposes a creative and subjective process to face both modern architecture and post-modern architecture with a new architecture open to unusual references. As such, through its different chapters, this study aims to compose a mosaic of postures which expresses the links and the differences between those architects in relation to the topics examined: criticism and alternatives to modern architecture, semantics of architecture, metaphor and other related concepts. At the same time, the continuous presence of the metaphor in the different chapters, and of the issues it relates to, shows the importance of this tool in the proposals of evolution and change of architecture in the period considered.

Juan Navarro Baldeweg : el dibujo de la mano como herramienta en el proceso creativo

Esta investigación es una incursión en el tránsito de Juan Navarro desde sus “habitaciones y horizontes”, las manifestaciones espontáneas de la mano y el proyectar, a la obra que nos devuelve a la experiencia física y corporal del mundo. Juan Navarro debe a sus manos gran parte de sus inquietudes y capacidades. Sus manos están presentes en su obra como materia –piezas de manos-, como herramienta -el dibujo por la mano- y como desencadenante en los procesos creativos de su obra de arquitectura. Las distintas obras remiten a una preocupación común: la de visualizar el espacio a través de un imaginario personal. Sin embargo, el proceso creativo en cada disciplina se desarrolla teniendo en cuenta la especificidad del medio y la experiencia que provoca en el espectador. La obra, como concreción del proceso creativo, se explica por las continuidades y discontinuidades entre las herramientas, mecanismos y estrategias utilizadas en los distintos medios. La tesis se estructura en dos partes, en la primera se estudia cómo se producen los procesos creativos, sus mecanismos en los distintos medios plásticos y el dibujo como herramienta transversal. Se identifican los conceptos y temas que dan lugar a la obra profundizando en el papel de la mano como presencia orgánica, biológica y responsable de una forma de representación personal. La segunda parte se articula en dos capítulos que, a través del dibujo, muestran la arquitectura como modelo e identifican los mecanismos utilizados en su forma de proyectar y su relación con la obra en distintos proyectos. El texto se estructura como una secuencia de ideas articuladas alrededor de un universo gráfico que nos conduce por múltiples itinerarios desde los que atisbar los procesos creativos de Juan Navarro. Estos caminos son hilos con los que se teje una visión personal de la relación entre las herramientas y mecanismos utilizados por Juan Navarro y su obra. La manera cómo se produce el proceso creativo, los mecanismos y las herramientas que los ponen en marcha constituyen una forma de abordar la obra, que hasta la fecha, se ha tratado aisladamente sin una intención de construir un cuerpo estructurado de conocimiento. En la arquitectura Juan Navarro existe un vacío de conocimiento teórico y gráfico sobre el propio proceso y su forma de proyectar. Se ha persistido en la explicación de la obra, sus referencias, temas abordados, relaciones y trasvases sin ahondar en la especificidad del medio. Estos vacíos establecen la necesidad y justificación de esta tesis doctoral. La investigación comienza descifrando una obra que desde sus inicios trabaja con la dualidad de lo gestual y lo conceptual. Plantea una forma de ordenación del mundo, de la sensación sometida a la medida en la que finalmente la obra se recibe como signo que desencadena sentimientos y te devuelve al mundo. Propone la recuperación de los sentidos a través de una arquitectura como vivencia no reductible al espacio geométrico. Identifica los mecanismos y herramientas que se establecen en este proceso y termina concluyendo que el dibujo es la herramienta doblemente transversal porque atiende de forma desigual a las distintas disciplinas y a los dos extremos en que se presenta la actividad creatividad en el trabajo de Juan Navarro. Estos extremos se corresponden con un conocimiento corporal inconsciente y un trabajo constante guiado por la motivación, la predeterminación y la conceptualización. El dibujo por la mano es el espacio de encuentro entre lo que representa la mano y la posibilidad de expresión proyectual codificada. Se produce en un territorio que se extiende desde lo analógico subyacente –que se nutre de imágenes complejas- y el dominio simbólico construido. Abstract. This research is a foray into Juan Navarro’s transition from his "Rooms and Horizons", -spontaneous demonstrations of the hand-, to the project, -the work that brings us back to experiencing the physical world-. Juan Navarro owes his hands much of his capacities and inquisitiveness. His hands are present in his work as the subject –“Hand Pieces”-, as a tool -through hand-drawing - and as a trigger in the creative processes of his work of architecture. The various works refer to a common theme: the viewing space through a personal imagery. However, the creative process in each discipline develops taking into account the specificity of the medium and the experience that arouses in the observer. The work, as completion of the creative process, is explained by the continuities and discontinuities between the tools, mechanisms and strategies used in the different media. The thesis is structured in two parts, the first studies how the creative processes are iniciated, their mechanisms in the different plastic art media, as well as drawing as a transversal tool. In this section the investigation identifies the concepts and themes that give rise to the art work, exploring the role of the hand as the organic, biological presence responsible for a way of personal representation. The second part is divided into two chapters, which, via the drawing, show the architecture as a model and identify the mechanisms used in the his way of projecting form of the project and its the relationship of hand-drawing to with his work ilustrated with different projects. The text is structured as a sequence of ideas, articulated around a graphic universe that leads us by multiple paths, letting us glimpse into the creative processes of Juan Navarro. These paths are threads that weave a personal vision of the relationship between the tools and mechanisms used by Juan Navarro in his work. The way the creative process takes place, the mechanisms and tools that set it in action, constitutes a way of dealing with the work, that, hithergo, has been treated in isolation without an intention to build a structured body of knowledge. In Navarro Baldeweg’s architecture there is a vacuum of theoretical and graphic knowledge of the process itself and his way of projecting. So far, emphasis has been placed mainly on his work’s explanation, its references, the subjects covered, connections and transfers, without delving into the specificity of each medium. These academic gaps justify the need for this doctoral thesis. The investigation begins deciphering a work that, since its very beginning, deals with the duality of the gesture and the concept. It poses a way of managing the world and the sensations which are submitted until it finally detects the work as a sign that triggers feelings and returns the observer to the real world. It proposes the recovery of the senses through an architecture that is sensed as an experience and not merely reduced to geometric space. It identifies the mechanisms and tools that are set out in this process and concludes that drawing is a core tool working in two directions, because it caters unevenly to the various disciplines and to both ends of the creative activity presented in the work of Juan Navarro. These ends correspond with an unconscious physical knowledge and a continuous work guided by motivation, predetermination and conceptualization. Hand-drawing is the meeting space between what the hand represents, and the possibility of an encoded, projectual expression. Thus, hand-drawing takes place in a territory that covers the underlying analogue - which feeds on complex images - to the symbolic built domain.

La transformación de la fachada en la arquitectura del siglo XX : evolución de los elementos arquitectónicos hacia el espacio

Esta tesis doctoral, bajo el título “La transformación de la fachada en la arquitectura del siglo XX. Evolución de los elementos arquitectónicos hacia el espacio único”, examina –siguiendo el método deductivo mediante investigación documental y de campo– los principales mecanismos proyectuales que han originado una transformación arquitectónica en la fachada. El término fachada, leído normalmente como sinónimo de arquitectura, ha sido analizado bajo taxonomías historiográficas, sociopolíticas, formales, compositivas o materiales. Más allá de estas clasificaciones, esta investigación determina cómo han evolucionado los elementos arquitectónicos hacia el espacio único, transformando con ello tanto la realidad física como el concepto de fachada. Proyectar, como diría Robert Venturi1. 1966, tanto desde el exterior al interior como desde el interior al exterior, produce las tensiones necesarias que ayudan a generar la arquitectura. De ahí la importancia del estudio de la transformación de la fachada como faccia, máscara, disfraz o sistema de representación, a la fachada como un diafragma activo, como un espacio de relación o como un límite donde se produce una experiencia arquitectónica con nuevos significados. El término fachada, del latín facies y del italiano facciata, fue creado como tal durante el siglo XVI, aunque como elemento arquitectónico es una realidad clásica y un concepto humanista reinventado en el Renacimiento. A principios del siglo XX la fachada se transforma radicalmente, con la aparición del vidrio plano de grandes dimensiones, y se despoja de su carga historicista. La transparencia literal hace desaparecer (negar) la fachada. La fachada se construye con nuevos materiales, nuevas tecnologías, y responde a un espacio global que espera a ser colonizado por una sociedad en constante mutación; un espacio que irá siendo cada vez más complejo a lo largo del siglo pasado y que tendrá como una de sus principales consecuencias un mayor grado de abstracción en la fachada. Para desarrollar con mayor precisión las intenciones de este trabajo se analiza la acepción de fachada en la que se encuadra la línea de investigación de la tesis doctoral. Siguiendo las indicaciones del Profesor Kenneth Frampton, se ha optado por dedicar precisamente a este análisis el primer capítulo, de precedentes, con el fin de hacer una relectura de la fachada barroca en clave contemporánea. La fachada barroca se estudia como un punto de inflexión, y origen de la transformación, frente al clasicismo de siglos precedentes. Se plantea por tanto como el primero de los mecanismos proyectuales motivo de estudio. Estos mecanismos han sido sometidos a una clasificación que responde a diversos tipos de espacio arquitectónico que han provocado la transformación de la fachada, analizando cada uno de ellos con un filtro bajo el cual se ha desarrollado un estudio pormenorizado. De esta manera se examinan la transformación compositiva de la fachada por medio del espacio dinámico (capítulo 00_precedentes) en San Carlo alle Quattro Fontane de Francesco Borromini, la transformación constructiva de la fachada por medio del espacio membrana (capítulo 01) en la Villa Tugendhat de Mies van der Rohe, la transformación diagramática de la fachada por medio del espacio pliegue (capítulo 02) en la terminal portuaria de Yokohama de FOA, la transformación tecnológica de la fachada por medio del espacio estructura (capítulo 03) en la mediateca de Sendai de Toyo Ito y, finalmente, la transformación fenomenológica de la fachada por medio del espacio múltiple (capítulo 04) en el pabellón de vidrio del Museo Toledo de SANAA. La investigación se completa con el análisis de una serie de textos que acompañan a cada uno de los capítulos, generando así un cuerpo de conocimiento global junto al análisis documental y las visitas de campo de cada uno de los casos de estudio considerados. ABSTRACT This doctoral thesis entitled “The Transformation of the Façade in Twentieth Century Architecture. The Evolution of Architectural Elements Towards a Single Space“ employs a deductive methodology incorporating both archival and field research, to examine the main design strategies that have given rise to the architectural transformation of the façade. The term façade, usually read as a synonym for architecture, has been analyzed under historiographic, sociopolitical, formal, compositive and material taxonomies. Far beyond these classifications, this study determines how architectural elements have evolved towards a single space, consequently transforming both the physical reality and the concept of façade. As Robert Venturi would say,1 to design from the inside-out and from the outside-in can create valid tensions that help generate architecture, hence the importance of this study of the transformation of the façade as a faccia, a mask, disguise or representation system, to the façade as an active diaphragm, a connective space or a limit within which architectural events with new meaning take place. The term fachada (Spanish for façade), from the Latin facies and the Italian facciata, appeared as such during the sixteenth century, although as an architectural element it is a classical ingredient and a humanist concept reinvented during the Renaissance. At the beginning of the 20th century, the façade is radically transformed with the introduction of large format plate glass, stripping it of its historicist content. Literal transparency causes the façade to disappear. The façade is built with new materials, new technologies, responding to a global space to be occupied by an everchanging society. It is a space that becomes increasingly more complex throughout the last century and which will have, as a consequence, a larger degree of abstraction in the façade. In order to more precisely focus this investigation, the meaning of the façade has been scrutinized. Following Professor Kenneth Frampton’s advice, the first chapter -Precedents- is precisely dedicated to this analysis, in order to understand the baroque façade read in a contemporary manner. The baroque façade has been studied as a turning point, the origin of the transformation of the façade, as compared to the classicism of previous centuries. For this reason it is considered the first design strategy to be studied. These strategeies have been sorted into a classification of architectural spaces that have caused the transformation of the façade, all of which having been analyzed using a methodology allowing for detailed study. Thus, this investigation examines the compositional transformation of the façade by means of a dynamic space (chapter 00: Precedents) in San Carlo alle Quattro Fontane by Francesco Borromini, the constructive transformation of the façade by means of a membrane space (chapter 01) in the Tugendhat Villa by Mies van der Rohe, the diagrammatic transformation of the façade by means of a folded space (chapter 02) in the Yokohama International Port Terminal by FOA, the technological transformation of the façade by means of a structure space (chapter 03) in the Sendai Mediathèque by Toyo Ito, and finally, the technological transformation of the façade by means of multiple space (chapter 04) in the Glass Pavilion of the Toledo Museum of Art by SANAA. The research is supplemented by the analysis of a series of texts presented alongside each chapter; creating a global body of knowledge together alongside the documentary analysis and on site analysis of each of the case studies considered.