Asymmetric propagation of airblast from bench blasting

This paper investigates the propagation of airblast from quarry blasting. Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and polar coordinates of the point of interest (distance to the blast and azimuth with respect to the free face of the blast). The model is in the form of the product of a classical scaled distance attenuation law times a directional correction factor. The latter considers the influence of the bench face, and attenuates overpressure at the top level and amplifies it at the bottom. Such factor also accounts for the effect of the delay by amplifying the pressure in the direction of the initiation sequence if the velocity of initiation exceeds half the speed of sound and up to an initiation velocity in the range of the speed of sound. The model has been fitted to an empirical data set composed by 134 airblast records monitored in 47 blasts at two quarries. The measurements were made at distances to the blast less than 450 m. The model is statistically significant and has a determination coefficient of 0.869

Banco de medidas automático para linealización de amplificadores

This work is focused on building and configuring a measurement test bench for non linear High Power Amplifiers, more precisely those ones based on the Envelope Elimination and Restoration. At first sight the test bench is composed of several arbitrary waveform generators, an oscilloscope, a vector signal generator and a spectrum analyzer all of them controlled remotely. The test bench works automatically, that is why several software control programs have been developed in order to control all this equipment. The control programs have been developed in Matlab/Octave Scripting language and at last chance in a more low level language as C. The signal processing algorithms, taking into account that the time alignment one is the most important, have been developed in Matlab/Octave Scripting too. An improvement of 10dB in the ACPR(Adjacent Channel Power Ratio) has been obtained just by applying the time alignment algorithm developed in this work

Modelado de materiales piezoeléctricos para aplicaciones de autoalimentación en entornos viales

Este proyecto continua con el estudio iniciado en los proyectos: Alimentación “Energy Harvesting” basada en fuentes piezoeléctricas, Alimentación autónoma: aplicación a fuente piezoeléctrica y Banco de pruebas para sistemas autoalimentados en aplicaciones viales, que se realizaron anteriormente. Este estudio se basa en la búsqueda de soluciones de alimentación Energy Harvesting centrados en fuentes piezoeléctricas. El objetivo de este estudio es conocer las posibilidades que pueden ofrecer los materiales piezoeléctricos para alimentación autónoma cuando son excitados por vehículos en diferentes circunstancias y entornos viales. Para la realización de este estudio se han utilizado señales provenientes del banco de ensayos, así como señales obtenidas de una instalación construida en un vial del Campus. Para poder realizar el estudio de los diversos materiales piezoeléctricos utilizados en este proyecto, se necesitan conocer las características de los modelos eléctricos. Para obtener estas características se ha diseñado un programa basado en LabView, este programa además puede modificar la señal para que simule las diversas circunstancias a las que pueden estar sometidos los diferentes materiales piezoeléctricos. En este estudio se ha tenido en cuenta la distancia de seguridad entre vehículos para diferentes velocidades y la posibilidad de poder amplificar la excitación que pueden recibir los diversos materiales. Utilizando el programa PSpice OrCAD® se realizan los diferentes modelos con el objetivo de observar el comportamiento de los materiales bajo diversas circunstancias. También se han utilizado varias topologías rectificadoras diferentes para poder comprobar en que situación se puede obtener la máxima tensión acumulada posible. Además también se ha evaluado la máxima potencia que puede entregar cada material en cada situación. Por ultimo se han realizado varias pruebas prácticas con el banco de ensayos para comprobar la acumulación energética real que se puede obtener de los materiales instalados en él. También se ha realizado el estudio de una aplicación práctica que sea capaz de alimentar pequeños circuitos o sensores de poco consumo. Abstract This Project goes on with the study started in the projects Feeding “Energy Harvesting” based on piezoelectric sources, independent feeding: application to piezoelectric source and testing bench to self fed systems in roads applications that were previously done. This study is based on the search of feeding solutions Energy Harvesting focus on piezoelectric sources. The aim of this study is know the different piezoelectric materials possibilities that can offer to independent feeding when different circumstances and road surroundings are excited by vehicles in. To develop this study several signals of the testing bench have been used and also signals get from an installation constructed on a Campus road. As far as the study of the different piezoelectric materials used in this project is concerned we should know the electrical models features. In order to obtain these characteristics a program based on LabView was designed, this program can modify the signal so that it simulates the diverse circumstances to which they can be put under the different piezoelectric materials. In this study I have bearded in mind the safe distance between vehicles for different speeds and the possibility of being able to amplify the excitation that can receive the diverse materials. Using the program PSpice OrCAD® the different models with the objective are made to observe the behaviour of the materials under diverse circumstances. Also several different rectifying topologies have been used to be able to verify the maximum overvoltage accumulated. In addition I have assessed the maximum power that can give each material in each situation. Last but not least different practical proofs with the testing bench have been done to check the actual energy accumulation that can be obtained from the materials installed on it. Also the study of a practical application has been made that is able to feed small circuits or low consumption sensor.

Energy and power aware scheduling algorithm modeling for battery powered embedded systems

Energy management has always been recognized as a challenge in mobile systems, especially in modern OS-based mobile systems where multi-functioning are widely supported. Nowadays, it is common for a mobile system user to run multiple applications simultaneously while having a target battery lifetime in mind for a specific application. Traditional OS-level power management (PM) policies make their best effort to save energy under performance constraint, but fail to guarantee a target lifetime, leaving the painful trading off between the total performance of applications and the target lifetime to the user itself. This thesis provides a new way to deal with the problem. It is advocated that a strong energy-aware PM scheme should first guarantee a user-specified battery lifetime to a target application by restricting the average power of those less important applications, and in addition to that, maximize the total performance of applications without harming the lifetime guarantee. As a support, energy, instead of CPU or transmission bandwidth, should be globally managed as the first-class resource by the OS. As the first-stage work of a complete PM scheme, this thesis presents the energy-based fair queuing scheduling, a novel class of energy-aware scheduling algorithms which, in combination with a mechanism of battery discharge rate restricting, systematically manage energy as the first-class resource with the objective of guaranteeing a user-specified battery lifetime for a target application in OS-based mobile systems. Energy-based fair queuing is a cross-application of the traditional fair queuing in the energy management domain. It assigns a power share to each task, and manages energy by proportionally serving energy to tasks according to their assigned power shares. The proportional energy use establishes proportional share of the system power among tasks, which guarantees a minimum power for each task and thus, avoids energy starvation on any task. Energy-based fair queuing treats all tasks equally as one type and supports periodical time-sensitive tasks by allocating each of them a share of system power that is adequate to meet the highest energy demand in all periods. However, an overly conservative power share is usually required to guarantee the meeting of all time constraints. To provide more effective and flexible support for various types of time-sensitive tasks in general purpose operating systems, an extra real-time friendly mechanism is introduced to combine priority-based scheduling into the energy-based fair queuing. Since a method is available to control the maximum time one time-sensitive task can run with priority, the power control and time-constraint meeting can be flexibly traded off. A SystemC-based test-bench is designed to assess the algorithms. Simulation results show the success of the energy-based fair queuing in achieving proportional energy use, time-constraint meeting, and a proper trading off between them. La gestión de energía en los sistema móviles está considerada hoy en día como un reto fundamental, notándose, especialmente, en aquellos terminales que utilizando un sistema operativo implementan múltiples funciones. Es común en los sistemas móviles actuales ejecutar simultaneamente diferentes aplicaciones y tener, para una de ellas, un objetivo de tiempo de uso de la batería. Tradicionalmente, las políticas de gestión de consumo de potencia de los sistemas operativos hacen lo que está en sus manos para ahorrar energía y satisfacer sus requisitos de prestaciones, pero no son capaces de proporcionar un objetivo de tiempo de utilización del sistema, dejando al usuario la difícil tarea de buscar un compromiso entre prestaciones y tiempo de utilización del sistema. Esta tesis, como contribución, proporciona una nueva manera de afrontar el problema. En ella se establece que un esquema de gestión de consumo de energía debería, en primer lugar, garantizar, para una aplicación dada, un tiempo mínimo de utilización de la batería que estuviera especificado por el usuario, restringiendo la potencia media consumida por las aplicaciones que se puedan considerar menos importantes y, en segundo lugar, maximizar las prestaciones globales sin comprometer la garantía de utilización de la batería. Como soporte de lo anterior, la energía, en lugar del tiempo de CPU o el ancho de banda, debería gestionarse globalmente por el sistema operativo como recurso de primera clase. Como primera fase en el desarrollo completo de un esquema de gestión de consumo, esta tesis presenta un algoritmo de planificación de encolado equitativo (fair queueing) basado en el consumo de energía, es decir, una nueva clase de algoritmos de planificación que, en combinación con mecanismos que restrinjan la tasa de descarga de una batería, gestionen de forma sistemática la energía como recurso de primera clase, con el objetivo de garantizar, para una aplicación dada, un tiempo de uso de la batería, definido por el usuario, en sistemas móviles empotrados. El encolado equitativo de energía es una extensión al dominio de la energía del encolado equitativo tradicional. Esta clase de algoritmos asigna una reserva de potencia a cada tarea y gestiona la energía sirviéndola de manera proporcional a su reserva. Este uso proporcional de la energía garantiza que cada tarea reciba una porción de potencia y evita que haya tareas que se vean privadas de recibir energía por otras con un comportamiento más ambicioso. Esta clase de algoritmos trata a todas las tareas por igual y puede planificar tareas periódicas en tiempo real asignando a cada una de ellas una reserva de potencia que es adecuada para proporcionar la mayor de las cantidades de energía demandadas por período. Sin embargo, es posible demostrar que sólo se consigue cumplir con los requisitos impuestos por todos los plazos temporales con reservas de potencia extremadamente conservadoras. En esta tesis, para proporcionar un soporte más flexible y eficiente para diferentes tipos de tareas de tiempo real junto con el resto de tareas, se combina un mecanismo de planificación basado en prioridades con el encolado equitativo basado en energía. En esta clase de algoritmos, gracias al método introducido, que controla el tiempo que se ejecuta con prioridad una tarea de tiempo real, se puede establecer un compromiso entre el cumplimiento de los requisitos de tiempo real y el consumo de potencia. Para evaluar los algoritmos, se ha diseñado en SystemC un banco de pruebas. Los resultados muestran que el algoritmo de encolado equitativo basado en el consumo de energía consigue el balance entre el uso proporcional a la energía reservada y el cumplimiento de los requisitos de tiempo real.

Prediction of near field overpressure from quarry blasting

This paper investigates the propagation of airblast or pressure waves in air produced by bench blasting (i.e. detonation of the explosive in a row of blastholes, breaking the burden of rock towards the free vertical face of the block). Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and the polar coordinates of the position of interest (distance to the source and azimuth with respect to the free face). The model has been fitted to empirical data using linear least squares. The data set is composed of 122 airblast records monitored at distances less than 400 m in 41 production blasts carried out in two quarries. The model is statistically significant and has a determination coefficient of 0.87. The formula is validated from 12 airblast measurements gathered in five additional blasts.

Neutron features at the UPM neutronics hall

The neutronics hall of the Nuclear Engineering Department at the Polytechnical University of Madrid has been characterized. The neutron spectra and the ambient dose equivalent produced by an 241AmBe source were measured at various source-to-detector distances on the new bench. Using Monte Carlo methods a detailed model of the neutronics hall was designed, and neutron spectra and the ambient dose equivalent were calculated at the same locations where measurements were carried out. A good agreement between measured and calculated values was found.

Characterization of an 241AmBe neutron irradiation facility by different spectrometric techniques

An automated panoramic irradiator with a 3 Ci 241Am-Be neutron source is installed in a bunker-type large room at the Universidad Politécnica de Madrid (UPM). It was recently modified and a neutron spectrometry campaign was organized to characterize the neutron fields in different measurement points along the irradiation bench. Four research groups working with different Bonner Sphere Spectrometers (BSS) and using different spectral unfolding codes took part to this exercise. INFN-LNF used a BSS formed by 9 spheres plus bare detector, with cylindrical, almost point like, 6LiI(Eu) scintillator (4 mm x 4 mm, from Ludlum); UAZ-UPM employed a similar system but with only 6 spheres plus bare detector; UAB worked with a 3He filled proportional counter at 8kPa filling pressure, cylindrical 9 mm x 10 mm (05NH1 from Eurisys) with 11 spheres configuration; and CIEMAT used 12 spheres with an spherical 3He SP9 counter (Centronic Ltd., UK) with very high sensitivity due to the large diameter (3.2 cm) and the filling pressure of the order of 228 kPa. Each group applied a different spectral unfolding method: INFN and UAB worked with FRUIT ver. 3.0 with their own response matrixes; UAZ-UPM used the BUNKIUT unfolding code with the response matrix UTA4 and CIEMAT employed the GRAVEL-MAXED-IQU package with their own response matrix. The paper shows the main results obtained in terms of neutron spectra at fixed distances from the source as well as total neutron fluence rate and ambient dose equivalent rate H*(10) determined from the spectra. The latter are compared with the readings of a common active survey-meter (LB 6411). The small differences in the results of the various groups are discussed.

Analysis of WCET in an experimental satellite software development.

This paper describes a case study in WCET analysis of an on-board spacecraft software system. The attitude control system of UPMSat-2, an experimental micro-satellite which is scheduled to be launched in 2013, is used for an experiment on analysing the worst-case execution time of code automatically generated from a Simulink model. In order to properly test the code, a hardware-in-the-loop configuration with a simulation model of the spacecraft environment has been used as a test bench. The code has been analysed with RapiTime, with some modifications to the original instrumentation routines, in order to take into account the particularities of the test configuration. Results from the experiment are described and commented in the paper.

Gestión de pruebas para equipos de vídeo

Desde hace ya muchos años, uno de los servicios de telecomunicaciones más demandado por los españoles ha sido la televisión de pago, complementando y ampliando la oferta de contenidos audiovisuales que habitualmente son ofrecidos de manera gratuita por la televisión analógica y recientemente por la televisión digital terrestre o TDT. Estos servicios de video, han sido tradicionalmente ofrecidos por operadores satélites, operadores de cable u otros operadores de telecomunicaciones con los que a través de una conexión de datos (ADSL, VDSL o fibra óptica), ofrecían sus contenidos a través de IP. La propia evolución y mejora de la tecnología utilizada para la emisión de contenidos sobre IP, ha permitido que a día de hoy, la televisión se conciba como un servicio Over The Top (OTT) ajeno al medio de transmisión, permitiendo a cualquier agente, distribuir sus contenidos audiovisuales de manera sencilla y a todos sus clientes en todas las partes del mundo; siendo solamente necesario disponer de una conexión a internet. De esta manera, el proyecto desarrollado va a girar en torno a la herramienta StormTest de la empresa S3Group, comprada por CENTUM Solutions (empresa especializada en ofrecer servicio de ingeniería para sistema de comunicaciones, control e inteligencia de señal) con el objetivo de satisfacer las necesidades de sus clientes y con la que en definitiva se ha contado para la realización de este proyecto. El principal objetivo de este proyecto es la definición e implementación de un banco de pruebas que permita optimizar los procesos de validación técnica, mejorando los tiempos de ejecución y concentrando la actividad de los ingenieros en tareas de mayor valor. Para la realización de este proyecto, se han fijado diversos objetivos necesarios para el desarrollo de este tipo de actividades. Los principales son los siguientes:  Análisis de la problemática actual: donde en los procesos de aceptación técnica se dedica muchas horas de trabajo para la realización de pruebas repetitivas y de poco valor las cuales se pueden automatizar por herramientas existentes en el mercado.  Búsqueda y selección de una herramienta que satisfaga las necesidades de pruebas.  Instalación en los laboratorios.  Configuración y adaptación de la herramienta a las necesidades y proyectos específicos. Con todo ello, este proyecto cubrirá los siguientes logros:  Reducir los tiempos de ejecución de las campañas de pruebas, gracias a la automatización de gran parte ellas.  Realizar medidas de calidad subjetiva y objetiva complejas, imposibles de ejecutar a través de las personas. Mejorar y automatizar los sistemas de reporte de resultados. Abstract: Many years ago, one of the telecommunications services most demanded in Spain has been pay television, complementing and extending the offer of audiovisual content which are usually offered for free by analog tv and recently by digital terrestrial televisión or TDT. These video services, have been traditionally offered by satellite operators, cable operators or other telecommunications operators that through a data connection (ADSL,VDSL or fiber optic), offered its content over IP. The evolution and improvement of the technology used for broadcasting over IP, has allowed that to date, television is conceived as a service Over The Top (OTT), not dependent on the transmission medium, allowing any agent to distribute audiovisual content in a very simple way and to all its customers in all parts of the world; being only necessary to have an decent internet connection. In this way, the project will have relation with S3Group’s StormTest tool, bought by CENTUM Solutions (company specialized in engineering services for communications, control and signal intelligence system) with the aim of satisfying the needs of its customers and which ultimately has counted for the realization of this project. The main objective of this project is the definition and implementation of a test bench that allows to optimize the processes of technical validation, improving execution times and concentrating the activities of engineers on higher value tasks. For the realization of this project, it has been defined several objectives necessary for the development of this type of activity. The most important tones are listed below:  Analysis of the current situation: where in technical acceptance processes it is dedicated many hours of work for the completion of repetitive testing and without value which can be automated by tools available on the market  Search and selection of a tool that meets the needs of testing.  Installation on the laboratories.  Configuration and customization of the tool to specific projects. With all this, this project will cover the following achievements: Reduce the execution time of the testing campaigns, thanks to the automation of many of them.  Measurements of subjective and objective quality tests, impossible to run with engineers (due to subjective perception). Improve and automate reporting of results systems

Ensayos de seguridad eléctrica orientados a la vigilancia del mercado

El presente estudio recopila los diferentes bancos de pruebas de EMC, Radio, SAR y seguridad eléctrica que se utiliza en la vigilancia del mercado. Describe las pruebas realizadas por el Estado español para llevar a cabo el seguimiento y control de los equipos vendidos. En primer lugar se presenta una descripción cualitativa de los ambientes clasificados por requisitos que explica en qué consisten las pruebas que se hacen, cómo se configura el entorno de medida y cuáles son los equipos que se deben utilizar. Está ilustrado con fotografías de los bastidores, antenas, amplificadores, generadores y otros equipos que la SETSI tiene en su laboratorio en El Casar (Guadalajara). La vigilancia de los equipos se realiza periódicamente en los estados miembros de la Unión Europea. Los funcionarios responsables también se reúnen periódicamente a nivel europeo para sacar conclusiones y hacer proyecciones futuras. El equipo adquirido en centros comerciales de venta al público, después de poco más de un mes, en el que se pasan las pruebas, vuelve a la cadena de comercialización, por lo que los dispositivos no se puedan dañar. Las pruebas realizadas en el laboratorio no pueden ser perjudiciales para los dispositivos por lo que es necesario tomar precauciones en la ejecución de las pruebas. El centro del PFC es el área de la Seguridad Eléctrica. El capítulo 4 es una reproducción de la Norma internacional IEC 60950-1:2007/A11 sobre seguridad en equipos de tecnología de la información adaptada a los requisitos de la vigilancia de mercado. Las autoridades competentes se basan en este estándar para evaluar y garantizar la seguridad del usuario en los equipos de consumo. Diseñados los procedimientos de ensayo y montado un banco de acuerdo a estos ensayos, se ha preparado un manual de operador, capítulo 5, en el que se recogen cada una de las pruebas y controles visuales que deben realizarse para probar que el equipo es conforme. Para finalizar, en el capítulo 6, se ejecutan ensayos de ejemplo sobre tres dispositivos de prueba y se elaboran las correspondientes hojas de ensayo. El propósito es proporcionar al operador un manual completo del banco de seguridad eléctrica, es por ello que en el manual de operador se han repetido muchos fragmentos de la norma para facilitar al operador el objetivo concreto de las pruebas y el acceso fácil a la información. This dissertation presents the different test benches of EMC, Radio, SAR and Electrical Safety that are used in market surveillance. Describes the tests performed by the Spanish State to carry out the monitoring and control of equipment sold. First a qualitative description of the environments classified by requisites that explains in that consist the tests that are make it, how it configures the measure environment and which are the equipment that it should use. It is illustrated with photographs of the racks, antennas, amplifiers, generators and other equipment that the S.E.T.S.I has in its laboratory on El Casar (Guadalajara). The surveillance of equipment is performed periodically in the member states of the European Union. Responsible officials also periodically meet at European level to draw conclusions and make future projections. The equipment purchased in malls public sale, after little more than a month, in which the tests are passed, returned to the trade chain, which is why the devices cannot be damaged. The tests done in the laboratory may not be harmful for devices are thus necessary to take precautions in the execution of the tests. The center of this dissertation is the area of Electrical Safety. Chapter 4 is a reproduction of the International Standard IEC 60950-1:2007/A11 safety in teams of information technology, adapted to the requirements of market surveillance. The competent authorities are based on this standard to assess and ensure the user's safety in the consumption equipment. Designed test procedures and mounted on a bench according to these tests, it has prepared a manual operator, in Chapter 5, with each of the tests and visual inspections in order to prove that the equipment complies. Finally, in Chapter 6, such tests run on three devices are developed test and test some leaves. The purpose of this book is to provide an operator manual of the bench of electrical safety, which is why the operator manual have been repeated fragments of the standard, in chapter 5, to facilitate the operator to test execution and access to information.

Ensayos de laboratorio para la medida de la tasa de absorción específica (SAR) en dispositivos móviles

El proyecto trata del estudio de la tasa de absorción específica (SAR). En él se estudia la SAR que desprenden distintos dispositivos de comunicaciones inalámbricos. Se ha llevado a cabo en las instalaciones de la SETSI, en el laboratorio de radiofrecuencia situado en El Casar, Guadalajara, que pertenece al Ministerio de Industria Comercio y Turismo. La SAR es una relación entre la energía electromagnética acumulada en una masa de un material o tejido concreto. Por tanto, lo primero es definir la SAR, en la que se exponen sus parámetros. Además, se recogen los límites de exposición fijados por las normas internacionales IEC 62209-1 e IEC 62209-2 en relación a SAR. Posteriormente, acorde con las normas, se realiza una definición detallada de un banco de medidas de SAR, en donde se explica cada uno de los componentes del banco de manera detallada así como los sistemas que intervienen previamente a la realización de la medida, tipos de los sistemas para realizar las verificaciones pertinentes, y también las incertidumbres de ciertos parámetros. También se realiza un proceso completo de medida de SAR en el laboratorio de la SETSI, donde se realizan las comprobaciones necesarias para la realización de una serie de medidas sobre dispositivos de comunicaciones móviles. Éstas medidas se realizan primero sobre un teléfono móvil en las frecuencias de GSM, UMTS y WIFI, en las configuraciones estipuladas por la norma; “tocando” e “inclinada 15°” comparando los valores obtenidos con los límites marcados por las normas internacionales. Por último, en este apartado se realizan ciertas medidas con otras configuraciones que no están recogidas en la norma para intentar obtener los máximos valores de SAR posibles. Después se realiza una comparación entre dos dispositivos tipo “tablet”, para ello se realizan medidas en la banda de WIFI y se comentan los resultados obtenidos, relacionado con el diseño de cada uno de ellos. Posteriormente se realiza un presupuesto de un banco de SAR, donde se detallan todos los componentes que intervienen en la realización de las medidas de SAR, pero no se incluyen en él, los costes de mantenimiento o los costes relacionados con su uso. Por último se explican las conclusiones finales desprendidas de la realización de este proyecto de fin de carrera así como la bibliografía utilizada. ABTRACT This project consists on the study of the specific absorption rate (SAR).It studies the different SAR of several wireless communications devices. It has been held in SETSI’S facilities, in its radio frecuency laboratory located in El Casar, Guadalajara, which belongs to the Ministy of Industry, Trade and Tourism. The SAR is a ratio between the electromagnetic energy accumulated in a mass of concrete material or tissue. Therefore, the SAR is defined first, which sets its parameters. Also lists the exposure limits set by international standards IEC 62209-1 and IEC 62209-2 regarding SAR. Subsequently, according to the guidelines, performing a detailed definition of a SAR measures bench, which explains each of the components in detail of the bench and involved systems prior to the realization of the extent and types of systems to perform the necessary checks, and certain parameters uncertainties. Also performed a complete process for SAR in the SETSI laboratory, located in El Casar, Guadalajara, where the necessary checks are made to carry out a serie of measures on mobile communications devices. These will be carried out first on a mobile phone at frequencies of GSM, UMTS and WiFi, in the configurations set by the standard, "touch" and "tilt 15 °" comparing the values obtained with the limits set by international standards. Finally, this section will perform certain actions with other configurations that are not included in the standard to try to get the maximum possible SAR values. Then a comparison is made between two devices, such as "tablet", this will make measurements in the band WIFI and discussed the results, related to the design of each. Subsequently, a budget of a SAR bench, detailing all components involved in SAR measures, but not included in it, maintenance costs or the costs associated with its use. Finally conclusions are explained detached from the realization of this project as well as the bibliography used on it.

Diseño y test VHDL de un cambiador de formato para ver TV3D en un televisor convencional

La difusión de TV3D actual utiliza formatos como el Side-by-Side o Top-and-Bottom, en los que cada par de imágenes, correspondiente a las vistas de los ojos derecho e izquierdo, se encapsula con la mitad de la resolución espacial en una sola imagen. Estas imágenes se muestran de manera casi simultánea de forma que el ojo humano compone una imagen con profundidad que se asemeja a la visión binocular natural. Desde hace un par de años las principales plataformas de televisión han empezado a crear canales con contenido 3D. La televisión 3D (TV3D) se ha introducido en los hogares gracias a los televisores estereoscópicos. Estos televisores, que son compatibles con los formatos antes mencionados, extraen de cada imagen sus dos vistas, recuperan la resolución original y presentan cada vista alternativamente en la pantalla, generando al mismo tiempo una señal de sincronismo para las gafas activas, creando de esta forma la sensación tridimensional de las imágenes. En este PFC se pretende realizar el diseño VHDL de un cambiador de formato que genere en tiempo real la secuencia de imágenes correspondiente a los ojos derecho e izquierdo, con resolución completa, a partir de una secuencia codificada en formato tipo Top-and-Bottom y el banco de test para su prueba. Este circuito se implementará como un periférico del procesador NIOS II de Altera. El diseño podría utilizarse como parte de un sistema que permita la visualización de las actuales emisiones de televisión 3D en un televisor convencional. La tecnología de referencia que se utilizará serán las FPGAs, más concretamente la tarjeta Cyclone III FPGA Starter Kit (EP3C25 FPGA) de Altera, junto a una tarjeta de ampliación de Microtronix con entrada y salida HDMI para video y audio. Además se pretende crear la documentación necesaria para el desarrollo de futuros trabajos relacionados con la televisión 3D. ABSTRACT Current TV3D broadcasting uses formats as Side-by-Side or Top-and-Bottom, where every single pair of images, corresponding to left and right eyes views, are encapsulated with half spatial resolution in one single image. These images are almost simultaneously displayed so that the human eye forms an image with depth resembling naturally binocular vision. From a couple of years the major TV platforms have begun to create 3D content channels. 3D Television (3DTV) has been introduced in homes through stereoscopic televisions. These televisions, which are compatible with the above formats, each image is extracted from the two views, and recover the original resolution and displays alternately each view in screen, while generating a synchronization signal for active glasses, thereby creating the three-dimensional sensation of the images. The main objective in this PFC is to make the design of an exchanger VHDL format in real time to generate the image sequence corresponding to the right and left eyes, with full resolution from an encoded sequence type format Top-and-Bottom and test bench for testing. This circuit is implemented as a Altera NIOS II processor peripheral.The design could be used as part of a system enabling the display of current television broadcasts 3D on a conventional television. The reference technology that will be use are FPGAs, more specifically Cyclone III FPGA Starter Card Kit (EP3C25 FPGA) Altera, along with an expansion card Microtronix with HDMI input and output video and audio. It also aims to create documentation for the development of future works related to 3D TV.

Low Voltage Ride-through in DFIG Wind Generators by Controlling the Rotor Current without Crowbars

Among all the different types of electric wind generators, those that are based on doubly fed induction generators, or DFIG technology, are the most vulnerable to grid faults such as voltage sags. This paper proposes a new control strategy for this type of wind generator, that allows these devices to withstand the effects of a voltage sag while following the new requirements imposed by grid operators. This new control strategy makes the use of complementary devices such as crowbars unnecessary, as it greatly reduces the value of currents originated by the fault. This ensures less costly designs for the rotor systems as well as a more economic sizing of the necessary power electronics. The strategy described here uses an electric generator model based on space-phasor theory that provides a direct control over the position of the rotor magnetic flux. Controlling the rotor magnetic flux has a direct influence on the rest of the electrical variables enabling the machine to evolve to a desired work point during the transient imposed by the grid disturbance. Simulation studies have been carried out, as well as test bench trials, in order to prove the viability and functionality of the proposed control strategy.

Flexible low-cost system to test batteries and ultracapacitors for electric and hybrid vehicles in real working conditions

Batteries and ultracapacitors for hybrid and electric vehicles must satisfy very demanding working conditions that are not usual in other applications. In this sense, specific tests must be performed in order to draw accurate conclusions about their behaviour. To do so, new advanced test benches are needed. These platforms must allow the study of a wide variety of energy storage systems under conditions similar to the real ones. In this paper, a flexible, low-cost and highly customizable system is presented. This system allows batteries and ultracapacitors to be tested in many and varied ways, effectively emulating the working conditions that they face in an electric vehicle. The platform was specifically designed to study energy storage systems for electric and hybrid vehicles, meaning that it is suitable to test different systems in many different working conditions, including real driving cycles. This flexibility is achieved keeping the cost of the platform low, which makes the proposed test bench a feasible alternative for the industry. As an example of the functionality of the platform, a test consisting of a 17-minute ARTEMIS urban cycle with a NiMH battery pack is presented.

Experimental and numerical analysis of concrete Slabs subjected to Blast

This paper summarizes the research activities focused on the behaviour of concrete and concrete structures subjected to blast loading carried out by the Department of Materials Science of the Technical University of Madrid (PUM). These activities comprise the design and construction of a test bench that allows for testing up to four planar concrete specimens with one single explosion, the study of the performance of different protection concepts for concrete structures and, finally, the development of a numerical model for the simulation of concrete structural elements subjected to blast. Up to date 6 different types of concrete have been studied, from plain normal strength concrete, to high strength concrete, including also fibre reinforced concretes with different types of fibres. The numerical model is based on the Cohesive Crack Model approach, and has been developed for the LSDYNA finite element code through a user programmed subroutine. Despite its simplicity, the model is able to predict the failure patterns of the concrete slabs tested with a high level of accuracy