Soil compaction and vegetation cover in a Scots pine stand at the Mediterranean rangelands

Right development of ROOT SYSTEMS is essential to ensure seedling survival in the initial stages of natural regeneration processes. Soil compaction determines this development both because of its influence on soil Tª & moisture dynamics and for its direct effect on soil mechanical impedance to root growth. All this effects can be assessed as a whole through soil penetration resistance (Soil Strength) measurements. SOIL STRENGTH has been usually evaluated in forest research in connection with severe disturbances derived from heavy machinery works during forest operations. Nevertheless, undisturbed soils are also expected to show different levels of compaction for root development. Organic matter modifies soil structure and so on porosity, compaction and resultant soil resistance to penetration. Its concentration in surface layers is rather related to vegetation cover composition and density. So within forest stands, a relationship is expected to be found between VEGETATION COVER density and compaction measured as resistance to penetration (soil strength)

Influence of temperature and moisture content in Non-destructive values of Scots pine (Pinus sylvestris L.)

Good results evaluating material properties using non-destructive testing (NDT) techniques have been achieved for decades. Several studies to understand the influence of temperature and moisture content on NDT have concluded different effects. In this study, NDT parameters were measured on the principal structural Spanish sawn timber species, Scots pine (Pinus sylvestris L.). NDT were conducted on 216 specimens of nominal dimensions 20 by 20 by 400 mm. Specimens were divided into several groups and studied at six different temperatures and four different moisture contents. Commercial equipment and techniques applied were Sylvatest Duo (ultrasonic wave technique), Steinkamp BPV (ultrasonic wave technique), and Grindo Sonic Mk5 "Industrial" (vibration analysis technique). Differences in NDT values within specimens at different temperatures and moisture contents were obtained. Main results of this study and relationships that describe changes in NDT values by effect of temperature and moisture content are presented.

Análisis de parámetros de fendas para la estimación de las propiedades mecánicas de vigas de madera de Pinus sylvestris L. Analysis of parameters for assessing drying fissures to estimate their influence on the mechanical properties of Pinus sylvestris L. wooden beams

El principal objetivo de este estudio es evaluar la influencia de las fendas de secado en las propiedades mecánicas de vigas de madera. Para esto, se utilizan 40 vigas de Pino silvestre (Pinus sylvestris L) de 4200 mm de longitud y 150x200 mm de sección que fueron ensayadas según norma EN 408. Las fendas se registran detalladamente atendiendo a su longitud y posición en cada cara de la viga, y midiendo el espesor y la profundidad cada 100mm a lo largo de la viga. Solo el 10% de la muestra es rechazada por las fendas, según los criterios establecidos por la norma española de clasificación visual UNE 56544. Para evaluar la influencia de las fendas en las propiedades mecánicas, se usan tres parámetros globales basados en el área, el volumen o la profundad de la fenda, y dos locales basados en la profundidad máxima y la profundidad en la zona de rotura. Además se determina la densidad de las piezas. Estos parámetros se comparan con las propiedades mecánicas (tensión de rotura, módulo de elasticidad y energía de rotura) y se encuentra escasa relación entre ellos. Las mejores correlaciones se encuentran entre los parámetros relacionados con la profundidad de las fendas, tanto con el módulo de elasticidad como con la tensión de rotura. The aim of this study is the evaluation of the influence of drying fissures on the mechanical properties of timber beams. For that purpose, 40 sawn timber pieces of Scots pine (Pinus sylvestris L.) with 150x200 mm in cross-section and 4200 mm in length have been tested according to EN 408, obtaining MOR and MOE. The fissures were registered in detail measuring their length and position in each face of the beam, and the thickness and depth every 100 mm in length. Only 10 % of the pieces were rejected because fissures, according to UNE 56544 Spanish visual grading standard. To evaluate the influence of fissures in mechanical properties three global parameters: Fissures Area Ratio or ratio between the area occupied by fissures and the total area in the neutral axis plane of the beam; Fissures Volume Ratio or ratio between volume of fissures and the total volume of the beam; Fissures Average Depth and two local parameters were used: Fissures Maximum Depth in the beam, and Fissures Depth in the broken zone of the beam. Also the density of the beams was registered. These parameters were compared with mechanical properties (tensile strength, elasticity modulus, and rupture energy) and the relationship between them had not been founded. The best relationship was founded between the elasticity modulus y the tensile strength with the parameters which included the depth of the fissures.

Clasificación de madera estructural de gran escuadría de Pinus sylvestris l. mediante métodos no destructivos

Esta Tesis Doctoral aborda el estudio de algunas técnicas no destructivas para la clasificación de madera de pino silvestre (Pinus sylvestris L.) de procedencia española y de gruesa escuadría para uso estructural. Para la estimación del módulo de elasticidad y de la resistencia se han aplicado técnicas basadas en la propagación de una onda a través de la madera: onda de ultrasonidos (Sylvatest) o de impacto (Microsecond Timer) en dirección longitudinal, o vibración en dirección longitudinal y transversal (PLG). Para la estimación de la densidad se han utilizado métodos puntuales basados en el penetrómetro (Pilodyn) y en la resistencia al arranque de un tornillo. Las variables obtenidas han sido relacionadas con los resultados de la clasificación visual y con las propiedades de la madera determinadas mediante ensayo mecánico. Además, se ha estudiado la influencia de la humedad de la madera en la velocidad de propagación de la onda para definir factores de corrección a los equipos comerciales utilizados en esta Tesis Doctoral. La muestra de estudio está formada por 244 piezas procedentes de El Espinar, Segovia, con dimensiones nominales 150 x 200 x 4000 mm (218 piezas) y 100 x 150 x 3000 mm (26 piezas). De todas las piezas se tomaron datos de dimensiones, contenido de humedad y clasificación visual según la norma UNE 56544. En las primeras 218 vigas se aplicaron las técnicas de ultrasonidos, onda de impacto y vibraciones, se determinó la densidad de cada pieza completa y se ensayaron según la norma UNE-EN 408 para obtener el módulo de elasticidad global (en todos los casos) y local (en un porcentaje), así como de la tensión de rotura. Se extrajeron tres rebanadas para los ensayos puntuales y para el cálculo de la densidad. En las otras 26 piezas se repitieron los ensayos (transmisión de onda, vibración y clasificación visual) durante el proceso de secado natural, desde que la madera se encontraba húmeda (en torno al 40 %) hasta la humedad de equilibrio higroscópico (en torno al 9%). Respecto a la clasificación visual no se han observado diferencias significativas entre la calidad MEG o las rechazadas. Se han estudiado las consecuencias del secado (principalmente las deformaciones) y no se ha encontrado justificación para que estos defectos penalicen la clasificación. Para la densidad, el mayor R2 obtenido ha sido de un 47% a partir del uso combinado de los dos equipos puntuales (penetrómetro y arranque de tornillo). Para el módulo de elasticidad y la tensión de rotura, la mejor relación se ha obtenido a partir de la técnica de vibración longitudinal, con unos coeficientes de 79% y un 52% respectivamente. Se ha estimado que el aumento de un punto porcentual en el contenido de humedad de la madera produce una pérdida de velocidad de onda del 0,58% para Sylvatest y Microsecond Timer, y del 0,71% para PLG. Estos valores son generalizables para un rango de humedades entre 9 y 25 %. Abstract This Doctoral Thesis approach the study of some non-destructive techniques as a classification method for structural use of Scots pine wood of Spanish origin with large cross section. To estimate the modulus of elasticity and strength have been used techniques based on the propagation of a wave through the timber: ultrasonic wave (Sylvatest) or stress wave (Microsecond Timer) in longitudinal direction, or vibration in longitudinal and transversal direction (PLG). Local probing methods have been applied to estimate the density, based on penetrometer (Pilodyn) and the screw withdrawal resistance meter. The different variables obtained were compared with the results of the visual grading and the values of the properties of the wood determined by the standardized test of the pieces. Furthermore, the influence of the moisture content of the wood on the velocity of propagation of the waves through the timber has been analyzed in order to establish a correction factor for the commercial devices used in this Doctoral Thesis. The sample tested consists of 244 pieces from El Espinar, Segovia, with nominal dimensions 150 x 200 x 4000 mm (218 pieces) and 100 x 150 x 3000 mm (26 pieces). Data collection about dimensions, moisture content and visual grading according to the UNE 56544 standard were carried out on all the pieces. The first 218 pieces were tested by non destructive techniques based on ultrasonic wave, stress wave and vibration, the density was measured on each piece and bending test according to the UNE-EN 408 standard was carried out for calculating the global modulus of elasticity (all the pieces) and the local one (only a representative group), as well as the bending strength. Three slices were removed for implementing the local probing and to calculate the density. In the other 26 pieces the tests (wave transmission, vibration and visual grading) were repeated during the natural drying process, from wet timber (around 40 % moisture content) up to the equilibrium moisture content (around 9%). Regarding the visual grading no significant differences were observed between MEG or rejected pieces. The effects of drying (deformations) have been studied, and justification for the specification hasn't been found. To estimate the density, the greater R2 obtained was 47% by using both penetrometer and screw withdrawal. For the modulus of elasticity and bending strength, the best relationship has been found with the longitudinal vibration, with coefficients of 79% and 52% respectively. It has been estimated that an increase of a point of the moisture content of the wood produces a decrease on the velocity obtained from ultrasonic or stress wave of 0,58%, and 0,71 % for the one obtained from vibration. Those values can be generalized for a range of moisture content from 9 to 25 %.

Experimental and numerical investigation of effect of sawn timber dimensions in ultrasonic velocity measurements of Spanish softwoods

Ultrasonic sound velocity measurements with hand-held equipment remain due to their simplicity among the most used methods for non-destructive grading of sawn woods, yet a dedicated normalization effort with respect to strength classes for Spanish species is still required. As part of an ongoing project with the aim of definition of standard testing methods, the effect of the dimensions of commonly tested Scots pine (Pinus sylvestris L.) timbers and equipment testing frequency on ultrasonic velocity were investigated. A dedicated full-wave finite-difference time-domain software allowed simulation of pulse propagation through timbers of representative length and section combinations. Sound velocity measurements vL were performed along the grain with the indirect method at 22 kHz and 45 kHz for grids of measurement points at specific distances. For sample sections larger than the cross-sectional wavelength ?RT, the simulated sound velocity vL converges to vL = (CL/?)0.5. For smaller square sections the sound velocity drops down to vL = (EL/?)0.5, where CL, EL and ? are the stiffness, E-modul and density, respectively. The experiments confirm a linear regression between time of flight and measurement distance even at less than two wavelength menor que2?L distance, the fitted sound speed values increased by 15% between the two tested frequencies.

Analyzing size-symmetric vs. size-asymmetric and intra-vs. inter-specific competition in beech (Fagus sylvatica L.) mixed stands

In mixed stands, inter-specific competition can be lower than intra-specific competition when niche complementarity and/or facilitation between species prevail. These positive interactions can take place at belowground and/or aboveground levels. Belowground competition tends to be size symmetric while the aboveground competition is usually for light and almost always size-asymmetric. Interactions between forest tree species can be explored analyzing growth at tree level by comparing intra and inter-specific competition. At the same time, possible causes of niche complementarity can be inferred relating intra and inter-specific competition with the mode of competition, i.e. size-symmetric or sizeasymmetric. The aim of this paper is to further our understanding of the interactions between species and to detect possible causes of competition reduction in mixed stands of beech (Fagus sylvatica L.) with other species: pine?beech, oak?beech and fir?beech. To test whether species growth is better explained by size-symmetric and/or size-asymmetric competition, five different competition structures where included in basal area growth models fitted using data from the Spanish National Forest Inventory for the Pyrenees. These models considered either size-symmetry only (Reineke?s stand density index, SDI), size-asymmetry only (SDI of large trees or SDI of small trees), or both combined. In order to assess the influence of the admixture, these indices were introduced in two different ways, one of which was to consider that trees of all species compete in a similar way, and the other was to split the stand density indices into intra- and inter-specific competition components. The results showed that in pine?beech mixtures, there is a slightly negative effect of beech on pine basal area growth while beech benefitted from the admixture of Scots pine; this positive effect being greater as the proportion of pine trees in larger size classes increases. In oak?beech mixtures, beech growth was also positively influenced by the presence of oaks that were larger than the beech trees. The growth of oak, however, decreased when the proportion of beech in SDI increased, although the presence of beech in larger size classes promoted oak growth. Finally, in fir?beech mixtures, neither fir nor beech basal area growth were influenced by the presence of the other species. The results indicate that size-asymmetric is stronger than size-symmetric competition in these mixtures, highlighting the importance of light in competition. Positive species interactions in size-asymmetric competition involved a reduction of asymmetry in tree size-growth relationships.

Unravelling past flash flood activity in a forested mountain catchment of the Spanish Central System

Flash floods represent one of the most common natural hazards in mountain catchments, and are frequent in Mediterranean environments. As a result of the widespread lack of reliable data on past events, the understanding of their spatio-temporal occurrence and their climatic triggers remains rather limited. Here, we present a dendrogeomorphic reconstruction of past flash flood activity in the Arroyo de los Puentes stream (Sierra de Guadarrama, Spanish Central System). We analyze a total of 287 increment cores from 178 disturbed Scots pine trees (Pinus sylvestris L.) which yielded indications on 212 growth disturbances related to past flash flood impact. In combination with local archives, meteorological data, annual forest management records and highly-resolved terrestrial data (i.e., LiDAR data and aerial imagery), the dendrogeomorphic time series allowed dating 25 flash floods over the last three centuries, with a major event leaving an intense geomorphic footprint throughout the catchment in 1936. The analysis of meteorological records suggests that the rainfall thresholds of flash floods vary with the seasonality of events. Dated flash floods in the 20th century were primarily related with synoptic troughs owing to the arrival of air masses from north and west on the Iberian Peninsula during negative indices of the North Atlantic Oscillation. The results of this study contribute considerably to a better understanding of hazards related with hydrogeomorphic processes in central Spain in general and in the Sierra de Guadarrama National Park in particular.

The influence of sensor placement on in-situ ultrasound wave velocity measurement.

Ultrasound wave velocity was measured in 30 pieces of Spanish Scots pine (Pinus sylvestris L.), 90 x 140 mm in cross-section and 4 m long. Five different sensor placement arrangements were used: end to end (V0), face to opposite face, edge to opposite edge, face to same face and edge to same edge. The pieces were successively shortened to 3, 2 and 1 m, in order to obtain these velocities and their ratios to reference value V0 for different lengths and angles with respect to the piece axis for the crossed measurements. The velocity obtained in crossed measurements is lower than V0. A correction coefficient for crossed velocities is proposed, depending on the angle, to adjust them to the V0 benchmark. The velocities measured on a surface, are also lower than V0, and their ratio with respect to V0 is close to 0.97 for distances equal to or greater than 18 times the depth of the beam.

La regeneración natural del pino silvestre (Pinus sylvestris L.) en el Valle del Lozoya (Madrid): germinación y supervivencia inicial

La fase de establecimiento del regenerado es un proceso crítico para el desarrollo posterior de la masa tanto por las elevadas tasas de mortalidad que habitualmente lleva asociadas, como por proporcionar el material de partida del que van a disponer las fases subsiguientes. Las restricciones a la germinación y establecimiento de la regeneración del pino silvestre varían enormemente entre las distintas regiones de su extensa área de distribución geográfica. La región Mediterránea constituye un hábitat marginal de la especie en el que las condiciones ecológicas son muy diferentes a las del grueso de su área de distribución. Frente a otras limitaciones (frío, luz, encharcamiento…), en el entorno mediterráneo la tasa de mortalidad parece estar asociada a las condiciones micrometeorológicas del período estival - particularmente, a la sequía -, así como a la presencia excesiva de ganado o ungulados silvestres. No obstante, la mayoría de la información disponible sobre el proceso de regeneración de la especie procede del centro y norte de Europa, por lo que no es de aplicación directa en nuestra región, en la que los estudios de este tipo son mucho más escasos. El presente trabajo pretende contribuir a paliar esta relativa escasez a través del estudio del proceso de regeneración natural en el monte “Cabeza de Hierro”, masa irregular por bosquetes de pino silvestre, paradigma de gestión sostenible y uso múltiple. En este entorno, se pretende caracterizar y cuantificar tanto el proceso de germinación y supervivencia de la especie como la influencia de la cobertura vegetal (estratos arbóreo, arbustivo y herbáceo, y capa de restos vegetales) en su desarrollo. Se persigue así mismo analizar el efecto de la compactación del suelo sobre la persistencia de la masa y contrastar y comparar la eficacia de dos tratamientos edáficos de ayuda a la regeneración: escarificado y decapado+acaballonado. Con este fin se han planteado dos diseños experimentales consistentes en sendas redes de muestreo (Red de Muestreo I o RM I y Red de Muestreo II o RM II) integradas, respectivamente, por 192 y 24 parcelas de 1,5x1,5 m ubicadas bajo distintas condiciones de cobertura vegetal. Sobre una parte de estas parcelas (1/4 en la Red de Muestreo I; 1/2 en la Red de Muestreo II) se han aplicado tratamientos de ayuda a la regeneración (RM I: escarificado; RM II: decapado+acaballonado) y, tras llevar a cabo siembras controladas al inicio del período vegetativo, se han practicado controles periódicos de germinación y supervivencia durante uno (RM II) y tres años consecutivos (RM I). Se han realizado así mismo mediciones complementarias de variables micrometeorológicas, espesura, recubrimiento superficial del suelo y compactación. Los resultados obtenidos a partir de las experiencias realizadas en el monte objeto de estudio permiten concluir que, en relación con el proceso de regeneración natural de la especie en este tipo masa y entorno: 1) la regeneración del pino silvestre durante el primer período vegetativo presenta una tasa de éxito muy baja (1,4% de los sembrados), provocada por una elevada mortalidad durante el primer período estival (>92%) subsiguiente a una germinación de en torno al 17% de las semillas viables que llegan al suelo; 2) la mortalidad sigue siendo elevada hasta el tercer período vegetativo, en que comienza a reducirse significativamente hasta alcanzar el 45%; 3) la cobertura vegetal influye significativamente tanto en el proceso de germinación como en el de supervivencia, aunque ambos procesos presentan una baja correlación linear que pone de manifiesto que los lugares idóneos para la germinación no siempre son los más adecuados para la supervivencia; 4) la escarificación del suelo mejora las tasas iniciales de germinación y supervivencia, pero empeora la tasa de supervivencia posterior (años 2 y 3), por lo que su efecto a medio plazo no resulta significativo; 5) el decapado+acaballonado presenta mejores resultados que el escarificado durante el primer verano, aunque sólo resulta efectivo en condiciones intermedias de espesura de masa; 6) la compactación edáfica no resulta limitante para la productividad ni la persistencia de la masa considerada. ABSTRACT Seedling establishment is critical for later stand progress because it involves high mortality rates and the surviving saplings constitute the starting material for all the subsequent stages. Restrictions for Scots pine germination and seedling survival may vary greatly across its geographical range, as it is widely distributed within north latitudes. Mediterranean region is a marginal sector within this species range and its ecological conditions differ greatly from those of the bulk of the area. Mortality rates in Mediterranean environments seem to be related to summer weather (mainly drought) and high livestock stocking rather than to cold, light or flooding. Most available information on scots pine regeneration process comes from north European experiences and is not transferable to Spanish forests, whereas studies on Mediterranean region are much scarcer. The present work aims at broadening Scots pine regeneration knowledge within Mediterranean region by analyzing its establishment process in the “Cabeza de Hierro” forest: a Scots pine uneven-aged forest at blocklevel scale, exemplary managed for multi-services purpose. Germination and surviving processes are to be characterized and quantified as to vegetation cover both in trees, shrubs, grass and litter strata. Soil compaction effects on forest sustainability are also assessed and the efficacy of some site preparation techniques on regeneration success is tested and compared (scarification vs. scalping+mounding). Two sampling networks comprising respectively 198 (SN I) and 24 plots (SN II) of 1.5x1.5m have been established over a wide range of vegetal cover conditions within the forest. Soil preparation techniques have been applied only to some of the sampling points; namely, 1 out of 4 plots have been scarified within Sampling Network I , while 1 out of 2 plots have been object of scalping & mounding within Sampling Network II. After localized sowing prior to growing season, germination and surviving have been periodically sampled for either one (SN II) or three years (SN I). Supplementary measures for micrometeorological variables, stand density, ground vegetal cover and compaction have also been carried out. Results obtained for the studied forest lead to the following insights regarding Scots pine natural regeneration process within this sort of forest and environment: 1) seedling establishment success rate is quite low (0,15% of sowing seeds), due to high mortality during the first summer (>92%), following a prior 17% rate of germination over viable seeds reaching the soil; 2) mortality rate remains high until the third year after emergence and then decreases to the 50% of surviving; 3) although vegetal cover significantly affects both seedling germination and survival, lineal correlation between those two processes is rather low, which may indicate that places fit for emergence are not necessarily suitable for summer surviving; 4) soil scarification improves both germination and survival during the first growing season, but it is associated to higher mortality rates during the next two years; hence it has no significant medium term effect; 5) scalping & mounding treatment is more effective than scarification concerning establishment improving during the first summer; but its effects are only significant under intermediate stand density levels; 6) soil compaction does not restrict either forest productivity or persistence, despite the area’s long history of high livestock stocking rates and mechanized logging.