Design energy input spectra for high seismicity regions based on Turkish registers

This work proposes design energy spectra in terms of an equivalent velocity, intended for regions with design peak acceleration 0.3 g or higher. These spectra were derived through linear and nonlinear dynamic analyses on a number of selected Turkish strong ground motion records. In the long and mid period ranges the analyses are linear, given the relative insensitivity of the spectra to structural parameters other than the fundamental period; conversely, in the short period range, the spectra are more sensitive to the structural parameters and, hence, nonlinear analyses are required. The selected records are classified in eight groups with respect to soil type (stiff or soft soil), the severity of the earthquake in terms of surface magnitude Ms(Ms≤ 5.5 and Ms> 5.5) and the relevance of the near-source effects (impulsive or vibratory). For each of these groups, median and characteristic spectra are proposed; such levels would respectively correspond to 50 and 95 % percentiles. These spectra have an initial linear growing branch in the short period range, a horizontal branch in the mid period range and a descending branch in the long period range. Empirical criteria for estimating the hysteretic energy from the input energy are suggested. The proposed design spectra are compared with those obtained from other studies.

Nanoindentation of Bridgman YBCO samples

In this study, the mechanical properties of YBa2Cu3O7−x, obtained by the Bridgman technique, were examined using a Berkovich tip indenter on the basal plane (0 0 1). Intrinsic hardness was measured by nanoindentation tests and corrected using the Nix and Gao model for this material. Furthermore, Vickers hardness tests were performed, in order to determine the possible size effect on these measurements. The results showed an underestimation of the hardness value when the tests were performed with large loads. Moreover, the elastic modulus of the Bridgman samples was 128 ± 5 GPa. Different residual imprints were visualised by atomic force microscopy and a focused ion beam, in order to observe superficial and internal fracturing. Mechanical properties presented a considerable reduction at the interface. This effect could be attributed to internal stress generated during the texturing process. In order to corroborate this hypothesis, an observation using transmission electron microscopy was performed.

Ferromanganese nodules and micro-hardgrounds associated with the Cadiz Contourite Channel (NE Atlantic): Palaeoenvironmental records of fluid venting and bottom currents

Ferromanganese nodule fields and hardgrounds have recently been discovered in the Cadiz Contourite Channel in the Gulf of Cadiz (850–1000 m). This channel is part of a large contourite depositional system generated by the Mediterranean Outflow Water. Ferromanganese deposits linked to contourites are interesting tools for palaeoenviromental studies and show an increasing economic interest as potential mineral resources for base and strategic metals. We present a complete characterisation of these deposits based on submarine photographs and geophysical, petrographic, mineralogical and geochemical data. The genesis and growth of ferromanganese deposits, strongly enriched in Fe vs. Mn (av. 39% vs. 6%) in this contourite depositional system result from the combination of hydrogenetic and diagenetic processes. The interaction of the Mediterranean Outflow Water with the continental margin has led to the formation of Late Pleistocene–Holocene ferromanganese mineral deposits, in parallel to the evolution of the contourite depositional system triggered by climatic and tectonic events. The diagenetic growth was fuelled by the anaerobic oxidation of thermogenic hydrocarbons (δ13CPDB=−20 to −37‰) and organic matter within the channel floor sediments, promoting the formation of Fe–Mn carbonate nodules. High 87Sr/86Sr isotopic values (up to 0.70993±0.00025) observed in the inner parts of nodules are related to the influence of radiogenic fluids fuelled by deep-seated fluid venting across the fault systems in the diapirs below the Cadiz Contourite Channel. Erosive action of the Mediterranean Outflow Water undercurrent could have exhumed the Fe–Mn carbonate nodules, especially in the glacial periods, when the lower core of the undercurrent was more active in the study area. The growth rate determined by 230Thexcess/232Th was 113±11 mm/Ma, supporting the hypothesis that the growth of the nodules records palaeoenvironmental changes during the last 70 ka. Ca-rich layers in the nodules could point to the interaction between the Mediterranean Outflow Water and the North Atlantic Deep Water during the Heinrich events. Siderite–rhodochrosite nodules exposed to the oxidising seabottom waters were replaced by Fe–Mn oxyhydroxides. Slow hydrogenetic growth of goethite from the seawaters is observed in the outermost parts of the exhumed nodules and hardgrounds, which show imprints of the Mediterranean Outflow Water with low 87Sr/86Sr isotopic values (down to 0.70693±0.00081). We propose a new genetic and evolutionary model for ferromanganese oxide nodules derived from ferromanganese carbonate nodules formed on continental margins above the carbonate compensation depth and dominated by hydrocarbon seepage structures and strong erosive action of bottom currents. We also compare and discuss the generation of ferromanganese deposits in the Cadiz Contourite Channel with that in other locations and suggest that our model can be applied to ferromanganiferous deposits in other contouritic systems affected by fluid venting.

Design energy spectra for Turkey

This work proposes design energy spectra in terms of velocity, derived through linear dynamic analyses on Turkish registers and intended for regions with design peak acceleration 0.3 g or higher. In the long and mid period ranges the analyses are linear, taking profit of the rather insensitivity of the spectra to the structural parameters other than the fundamental period; in the short period range, the spectra are more sensitive to the structural parameters and nonlinear analyses would be required. The selected records are classified in eight groups according to the design input acceleration, the soil type, the earthquake magnitude and the near-source effects. For each of these groups, median and characteristic spectra are proposed (50% and 95% percentiles). These spectra have an initial linear growing branch in the short period range, a horizontal branch in the mid period range and a descending branch in the long period range.

Tres iglesias sajonas fortificadas en Transilvania, Rumanía: Hosman, Pelişor y Moşna

Saxon colonization in Transylvania occurred from 12th Century with the establishment of the populations with certain degree of freedom and autonomy. External threats over this territory obliged to the fortification of their churches, mainly between 15th and 16th Centuries with the advance of Turkish Empire. The fortification of the churches consists on the building of walls with gates and flanking towers, and also with the incorporation of several defensive elements over the apses. Most outstanding characteristics of this fortified system are the homogeneity in typology, construction and polyorcetic, without detracting of the singularity of each one of the more of 150 conserved churches. The article presents an actual state of the art. Also, it develops the main historical elements and it explains the architectonic typology and the constructive characteristics. At last, defensive elements are analyzed from the comparative and deep study through three proper examples: the churches of Hosman, Pelisor and Mosna. La colonización sajona de Transilvania se produjo a partir del siglo XII con el asentamiento de poblaciones con cierto grado de libertad y autonomía. Las amenazas externas sobre este territorio obligaron a la fortificación de sus iglesias, principalmente entre los siglos XV y XVI ante el avance del imperio turco. La fortificación de las iglesias consta de la construcción de murallas con puertas y torres de flanqueo, además de la incorporación de diversos elementos poliorcéticos sobre las cabeceras de las iglesias. Las características más relevantes de este sistema fortificado es la homogeneidad tipológica, constructiva y poliorcética sin menoscabo de la singularidad de cada una de las más de 150 iglesias conservadas. El artículo presenta un estado de la cuestión actualizado, además de desarrollar los elementos históricos más relevantes, explicar la tipología arquitectónica y las característica constructivas y analizar los elementos poliorcéticos desde el estudio comparado y profundo de tres ejemplos característicos: las iglesias de Hosman, Pelisor y Mosna.

Development and implementation of a virtual laboratory for training process improvement in the mechanics of continuous media

The project arises from the need to develop improved teaching methodologies in field of the mechanics of continuous media. The objective is to offer the student a learning process to acquire the necessary theoretical knowledge, cognitive skills and the responsibility and autonomy to professional development in this area. Traditionally the teaching of the concepts of these subjects was performed through lectures and laboratory practice. During these lessons the students attitude was usually passive, and therefore their effectiveness was poor. The proposed methodology has already been successfully employed in universities like University Bochum, Germany, University the South Australia and aims to improve the effectiveness of knowledge acquisition through use by the student of a virtual laboratory. This laboratory allows to adapt the curricula and learning techniques to the European Higher Education and improve current learning processes in the University School of Public Works Engineers -EUITOP- of the Technical University of Madrid -UPM-, due there are not laboratories in this specialization. The virtual space is created using a software platform built on OpenSim, manages 3D virtual worlds, and, language LSL -Linden Scripting Language-, which imprints specific powers to objects. The student or user can access this virtual world through their avatar -your character in the virtual world- and can perform practices within the space created for the purpose, at any time, just with computer with internet access and viewfinder. The virtual laboratory has three partitions. The virtual meeting rooms, where the avatar can interact with peers, solve problems and exchange existing documentation in the virtual library. The interactive game room, where the avatar is has to resolve a number of issues in time. And the video room where students can watch instructional videos and receive group lessons. Each audiovisual interactive element is accompanied by explanations framing it within the area of knowledge and enables students to begin to acquire a vocabulary and practice of the profession for which they are being formed. Plane elasticity concepts are introduced from the tension and compression testing of test pieces of steel and concrete. The behavior of reticulated and articulated structures is reinforced by some interactive games and concepts of tension, compression, local and global buckling will by tests to break articulated structures. Pure bending concepts, simple and composite torsion will be studied by observing a flexible specimen. Earthquake resistant design of buildings will be checked by a laboratory test video.

Horizontal visibility graphs generated by type-I intermittency

The type-I intermittency route to (or out of) chaos is investigated within the horizontal visibility (HV) graph theory. For that purpose, we address the trajectories generated by unimodal maps close to an inverse tangent bifurcation and construct their associatedHVgraphs.We showhowthe alternation of laminar episodes and chaotic bursts imprints a fingerprint in the resulting graph structure. Accordingly, we derive a phenomenological theory that predicts quantitative values for several network parameters. In particular, we predict that the characteristic power-law scaling of the mean length of laminar trend sizes is fully inherited by the variance of the graph degree distribution, in good agreement with the numerics. We also report numerical evidence on how the characteristic power-law scaling of the Lyapunov exponent as a function of the distance to the tangent bifurcation is inherited in the graph by an analogous scaling of block entropy functionals defined on the graph. Furthermore, we are able to recast the full set of HV graphs generated by intermittent dynamics into a renormalization-group framework, where the fixed points of its graph-theoretical renormalization-group flow account for the different types of dynamics.We also establish that the nontrivial fixed point of this flow coincides with the tangency condition and that the corresponding invariant graph exhibits extremal entropic properties.

Census, reproductive biology, and germination of Astragalus gines-lopezii (Fabaceae), a narrow and endangered endemic species of SW Spain

Astragalus gines-lopezii Talavera, Podlech, Devesa & F.M.Vázquez (Fabaceae) is a threatened endemic species with a distribution restricted to a very small area in Badajoz Province (Extremadura Region, SW Spain) and only 2 populations are known. This species was catalogued in the ?Endangered? category in the 2008 Red List and the 2010 Threatened Spanish Vascular Flora List. Despite its status as an endangered species, at present very little is known about the distribution, census, and reproductive biology of this species. In this study we have carried out an exhaustive census of A. gines-lopezii , and we have evaluated the production of flowers, fruits, and seeds and the existence or not of intra- and interpopulation variability in seed germination. Results have highlighted the high reproductive capacity of this species on the basis of a high production of flowers, fruits, and seeds. Mechanical scarification of seeds was effective for increasing germination. Thus, initial germination (22%?60%) was increased to 97%?99% when seeds were rubbed with sandpapers. A high intra- and interpopulation variability in seed germination was found in this species. A. gines-lopezii produces seeds with different degrees of physical dormancy, varying this grade among different individuals within a population.

Census, reproductive biology, and germination of Astragalus gines-lopezii (Fabaceae),a narrow and endangered endemic species of SW Spain.

Astragalus gines-lopezii Talavera, Podlech, Devesa & F.M.Vazquez (Fabaceae) is a threatened endemic species with a distribution restricted to a very small area in Badajoz Province (Extremadura Region, SW Spain) and only 2 populations are known.This species was catalogued in the "Endangered" category in the 2008 Red List and the 2010 Threatened Spanish Vascular Flora List. Despite its status as an endangered species, at present very little is known about the distribution, census, and reproductive biology of this species. In this study we have carried out anexhaustive census of A. gines-lopezii, and we have evaluated the production of flowers, fruits, and seeds and the existence or not of intra- and interpopulation variability in seed germination. Results have highlighted the high reproductive capacity of this species on the basis of a high production of flowers, fruits, and seeds. Mechanical scarification of seeds was effective for increasing germination. Thus, initial germination (22%-60%) was increased to 97%-99% when seeds were rubbed with sandpapers. A high intra- and interpopulation variability in seed germination was found in this species. A. gines-lopezii produces seeds with different degrees of physical dormancy, varying this grade among different individuals within a population.

Assessment of species diversity and state of "Stipa tenacissima" steppes

North African steppes are subjected to extreme degradation resulting in the reduction of their surface, genetic erosion of resources, and decrease in biodiversity. "Stipa tenacissima" steppes, which constitute one of the most representative vegetation types in the driest areas of the Mediterranean basin, are continuously degrading. With the aim of contributing to a better knowledge of the floristic composition and diagnosing the state of degradation of these steppes, we conducted a phytoecological analysis of 10 "S. tenacissima" sites in Tunisia. Floristic inventory compiled a systematic list of 46 vascular plant species belonging to 43 genera and 26 families. Species richness ranged from 4 to 18 species per 900 m2. Total vegetation cover was moderate and fluctuated between 22.8% and 49.9%. Our results revealed also a decreasing trend in species richness with increasing elevation (ρ = –0.585). Indeed, species richness was negatively correlated with slope (ρ = –0.19) and positively correlated with sand content (ρ = 0.262). Biological types were dominated by chamaephytes; this chamaephytization is due to the phenomenon of aridization and overgrazing. Moreover, the low species cover and the appearance of nonpalatable species highlighted the vulnerability of these steppes to degradation.