HDTourist: exploring urban data on Android

The Web of Data currently comprises ? 62 billion triples from more than 2,000 different datasets covering many fields of knowledge3. This volume of structured Linked Data can be seen as a particular case of Big Data, referred to as Big Semantic Data [4]. Obviously, powerful computational configurations are tradi- tionally required to deal with the scalability problems arising to Big Semantic Data. It is not surprising that this ?data revolution? has competed in parallel with the growth of mobile computing. Smartphones and tablets are massively used at the expense of traditional computers but, to date, mobile devices have more limited computation resources. Therefore, one question that we may ask ourselves would be: can (potentially large) semantic datasets be consumed natively on mobile devices? Currently, only a few mobile apps (e.g., [1, 9, 2, 8]) make use of semantic data that they store in the mobile devices, while many others access existing SPARQL endpoints or Linked Data directly. Two main reasons can be considered for this fact. On the one hand, in spite of some initial approaches [6, 3], there are no well-established triplestores for mobile devices. This is an important limitation because any po- tential app must assume both RDF storage and SPARQL resolution. On the other hand, the particular features of these devices (little storage space, less computational power or more limited bandwidths) limit the adoption of seman- tic data for different uses and purposes. This paper introduces our HDTourist mobile application prototype. It con- sumes urban data from DBpedia4 to help tourists visiting a foreign city. Although it is a simple app, its functionality allows illustrating how semantic data can be stored and queried with limited resources. Our prototype is implemented for An- droid, but its foundations, explained in Section 2, can be deployed in any other platform. The app is described in Section 3, and Section 4 concludes about our current achievements and devises the future work.

Tecnología cloud para el hogar digital

El mundo tecnológico está cambiando hacia la optimización en la gestión de recursos gracias a la poderosa influencia de tecnologías como la virtualización y la computación en la nube (Cloud Computing). En esta memoria se realiza un acercamiento a las mismas, desde las causas que las motivaron hasta sus últimas tendencias, pasando por la identificación de sus principales características, ventajas e inconvenientes. Por otro lado, el Hogar Digital es ya una realidad para la mayoría de los seres humanos. En él se dispone de acceso a múltiples tipos de redes de telecomunicaciones (3G, 4G, WI-FI, ADSL…) con más o menos capacidad pero que permiten conexiones a internet desde cualquier parte, en todo momento, y con prácticamente cualquier dispositivo (ordenadores personales, smartphones, tabletas, televisores…). Esto es aprovechado por las empresas para ofrecer todo tipo de servicios. Algunos de estos servicios están basados en el cloud computing sobre todo ofreciendo almacenamiento en la nube a aquellos dispositivos con capacidad reducida, como son los smarthphones y las tabletas. Ese espacio de almacenamiento normalmente está en los servidores bajo el control de grandes compañías. Guardar documentos, videos, fotos privadas sin tener la certeza de que estos no son consultados por alguien sin consentimiento, puede despertar en el usuario cierto recelo. Para estos usuarios que desean control sobre su intimidad, se ofrece la posibilidad de que sea el propio usuario el que monte sus propios servidores y su propio servicio cloud para compartir su información privada sólo con sus familiares y amigos o con cualquiera al que le dé permiso. Durante el proyecto se han comparado diversas soluciones, la mayoría de código abierto y de libre distribución, que permiten desplegar como mínimo un servicio de almacenamiento accesible a través de Internet. Algunas de ellas lo complementan con servicios de streaming tanto de música como de videos, compartición y sincronización de documentos entre múltiples dispositivos, calendarios, copias de respaldo (backups), virtualización de escritorios, versionado de ficheros, chats, etc. El proyecto finaliza con una demostración de cómo utilizar dispositivos de un hogar digital interactuando con un servidor Cloud, en el que previamente se ha instalado y configurado una de las soluciones comparadas. Este servidor quedará empaquetado en una máquina virtual para que sea fácilmente transportable e utilizable. ABSTRACT. The technological world is changing towards optimizing resource management thanks to the powerful influence of technologies such as Virtualization and Cloud Computing. This document presents a closer approach to them, from the causes that have motivated to their last trends, as well as showing their main features, advantages and disadvantages. In addition, the Digital Home is a reality for most humans. It provides access to multiple types of telecommunication networks (3G, 4G, WI-FI, ADSL...) with more or less capacity, allowing Internet connections from anywhere, at any time, and with virtually any device (computer personal smartphones, tablets, televisions...).This is used by companies to provide all kinds of services. Some of these services offer storage on the cloud to devices with limited capacity, such as smartphones and tablets. That is normally storage space on servers under the control of important companies. Saving private documents, videos, photos, without being sure that they are not viewed by anyone without consent, can wake up suspicions in some users. For those users who want control over their privacy, it offers the possibility that it is the user himself to mount his own server and its own cloud service to share private information only with family and friends or with anyone with consent. During the project I have compared different solutions, most open source and with GNU licenses, for deploying one storage facility accessible via the Internet. Some supplement include streaming services of music , videos or photos, sharing and syncing documents across multiple devices, calendars, backups, desktop virtualization, file versioning, chats... The project ends with a demonstration of how to use our digital home devices interacting with a cloud server where one of the solutions compared is installed and configured. This server will be packaged in a virtual machine to be easily transportable and usable.

Mobile application stores: success factors, existing approaches and future developments

The mobile user experience has been significantly altered with the arrival of mobile broadband widespread deployments, massive improvements in available smartphones, and a shift in user habits toward a more participative, communicative role. In this context, mobile application stores have revolutionized software and content delivery. These stores focus on the applications, building around them an ecosystem of developers and consumers. The store greatly lessens the barrier between these agents, providing significant benefits to both developers and consumers. In this article we analyze this phenomenon, describing its originating factors and fundamental characteristics. We also perform a more detailed study on the two most successful application stores, identifying different approaches to implementing the model.

Sonophone: Desarrollo y evaluación de un sonómetro profesional para iOS

La medida de la presión sonora es un proceso de extrema importancia para la ingeniería acústica, de aplicación en numerosas áreas de esta disciplina, como la acústica arquitectónica o el control de ruido. Sobre todo en esta última, es necesario poder efectuar medidas precisas en condiciones muy diversas. Por otra parte, la ubicuidad de los dispositivos móviles inteligentes (smartphones, tabletas, etc.), dispositivos que integran potencia de procesado, conectividad, interactividad y una interfaz intuitiva en un tamaño reducido, abre la posibilidad de su uso como sistemas de medida de calidad y de coste bajo. En este Proyecto se pretende utilizar las capacidades de entrada y salida, procesado, conectividad inalámbrica y geolocalización de los dispositivos móviles basados en iOS, en concreto el iPhone, para implementar un sistema de medidas acústicas que iguale o supere las prestaciones de los sonómetros existentes en el mercado. SonoPhone permitirá, mediante la conexión de un micrófono de medida adecuado, la realización de medidas de acuerdo a las normas técnicas en vigor, así como la posibilidad de programar, configurar y almacenar o trasmitir las medidas realizadas, que además estarán geolocalizadas con el GPS integrado en el dispositivo móvil. También se permitirá enviar los datos de la medida a un almacenamiento remoto en la nube. La aplicación tiene una estructura modular en la que un módulo de adquisición de datos lee la señal del micrófono, un back-end efectúa el procesado necesario, y otros módulos permiten la calibración del dispositivo y programar y configurar las medidas, así como su almacenamiento y transmisión en red. Una interfaz de usuario (GUI) permite visualizar las medidas y efectuar las configuraciones deseadas por el usuario, todo ello en tiempo real. Además de implementar la aplicación, se ha realizado una prueba de funcionamiento para determinar si el hardware del iPhone es adecuado para la medida de la presión acústica de acuerdo a las normas internacionales. Sound pressure measurement is an extremely important process in the field of acoustic engineering, with applications in numerous subfields, like for instance building acoustics and noise control, where it is necessary to be able to accurately measure sound pressure in very diverse (and sometimes adverse) conditions. On the other hand, the growing ubiquity of mobile devices such as smartphones or tablets, which combine processing power, connectivity, interactivity and an intuitive interface in a small size, makes it possible to use these devices as quality low-cost measurement systems. This Project aims to use the input-output capabilities of iOS-based mobile devices, in particular the iPhone, together with their processing power, wireless connectivity and geolocation features, to implement an acoustic measurement system that rivals the performance of existing devices. SonoPhone allows, with the addition of an adequate measurement microphone, to carry out measurements that comply with current technical regulations, as well as programming, configuring, storing and transmitting the results of the measurement. These measurements will be geolocated using the integrated GPS, and can be transmitted effortlessly to a remote cloud storage. The application is structured in modular fashion. A data acquisition module reads the signal from the microphone, while a back-end module carries out the necessary processing. Other modules permit the device to be calibrated, or control the configuration of the measurement and its storage or transmission. A Graphical User Interface (GUI) allows visual feedback on the measurement in progress, and provides the user with real-time control over the measurement parameters. Not only an application has been developed; a laboratory test was carried out with the goal of determining if the hardware of the iPhone permits the whole system to comply with international regulations regarding sound level meters.

Plataforma MALL (Mobile-Assisted Language Learning) para el aprendizaje y desarrollo del conocimiento del idioma, particularizado en el Inglés

El creciente uso de las Tecnologías de la Información y las Comunicaciones en el ámbito educativo ha hecho posible que existan nuevas formas de enseñanza que facilitan el aprendizaje y la mejora de éste. Una de las ramas educativas que más influenciada se ha visto por esto es la de los idiomas, debido en gran parte a la necesidad global de aprender nuevas lenguas y mejorar sus conocimientos de ellas. Entre todos los idiomas que la gente desea aprender destaca uno por encima de todos, el inglés. Esto viene dado no solo por la presencia de éste a nivel mundial, sino por la gran repercusión en el ámbito educativo, comenzando a ser un requisito indispensable en la realización de estudios superiores. El presente proyecto Fin de Grado pretende contribuir a la mejora del conocimiento del inglés para estudiantes que no han alcanzado un nivel B2 de éste. En éste se desarrolla una plataforma educativa accesible por el mayor número de alumnos posibles, no solo solo a través de ordenadores personales, sino principalmente a través de dispositivos móviles tales como smartphones y tablets. Para que fuese posible una mayor utilización de esta por parte de los estudiantes era necesario la creación de una aplicación que pudiese ser utilizada desde cualquier dispositivo sin importar el sistema operativo empleado. Dicha plataforma educativa está formada por un juego de preguntas en la que los estudiantes deberán contestar correctamente para obtener una puntuación final con la que accederán a una clasificación con el resto de miembros de dicha plataforma. Con éste sistema de puntos se pretende dar una componente de gamificación al juego para motivar a los estudiantes a que sigan compitiendo y realizando test de preguntas. Además a dicha plataforma podrán acceder los profesores administradores de ella para monitorizar y ver resultados de los estudiantes participantes. ABSTRACT. The growing use of Information and Communication Technologies in the educational field has made possible for new teaching ways to exist, thus making learning easier and better. One of the more influenced educational branches by this fact is languages, largely due to a global need to learn them and improve knowledge. Among all the languages that people wish to learn, one stands out above them, English. It is given, not only by its worldwide presence, but by its big scholar repercussion; that English is an essential requirement for higher education. This final degree project aims to improve the english level for those who have a hard time doing it. This project develops an educational accesible platform to the greatest number of students, not only through personal computers, but mainly through mobile devices like smartphones or tablets. To make a great use of it by students possible, it was necessary an application which could be used from any device regardless of the operative system. This teaching platform is formed by a quiz game in which students must answer correctly in order to get a final score which will place them in a ranking composed by other platform members. With this score system it is intended to give a gamification component in order to motivate students to keep playing and answering question tests. Also, in this platform, administration teachers will be able to monitor the students and watch their results.

Análisis de los factores determinantes de la repetición del proceso de compra en el comercio electrónico entre empresas y consumidores finales. Aplicación al mercado español

Las Tecnologías de la Información y la Comunicación en general e Internet en particular han supuesto una revolución en nuestra forma de comunicarnos, relacionarnos, producir, comprar y vender acortando tiempo y distancias entre proveedores y consumidores. A la paulatina penetración del ordenador, los teléfonos inteligentes y la banda ancha fija y/o móvil ha seguido un mayor uso de estas tecnologías entre ciudadanos y empresas. El comercio electrónico empresa–consumidor (B2C) alcanzó en 2010 en España un volumen de 9.114 millones de euros, con un incremento del 17,4% respecto al dato registrado en 2009. Este crecimiento se ha producido por distintos hechos: un incremento en el porcentaje de internautas hasta el 65,1% en 2010 de los cuales han adquirido productos o servicios a través de la Red un 43,1% –1,6 puntos porcentuales más respecto a 2010–. Por otra parte, el gasto medio por comprador ha ascendido a 831€ en 2010, lo que supone un incremento del 10,9% respecto al año anterior. Si segmentamos a los compradores según por su experiencia anterior de compra podemos encontrar dos categorías: el comprador novel –que adquirió por primera vez productos o servicios en 2010– y el comprador constante –aquel que había adquirido productos o servicios en 2010 y al menos una vez en años anteriores–. El 85,8% de los compradores se pueden considerar como compradores constantes: habían comprado en la Red en 2010, pero también lo habían hecho anteriormente. El comprador novel tiene un perfil sociodemográfico de persona joven de entre 15–24 años, con estudios secundarios, de clase social media y media–baja, estudiante no universitario, residente en poblaciones pequeñas y sigue utilizando fórmulas de pago como el contra–reembolso (23,9%). Su gasto medio anual ascendió en 2010 a 449€. El comprador constante, o comprador que ya había comprado en Internet anteriormente, tiene un perfil demográfico distinto: estudios superiores, clase alta, trabajador y residente en grandes ciudades, con un comportamiento maduro en la compra electrónica dada su mayor experiencia –utiliza con mayor intensidad canales exclusivos en Internet que no disponen de tienda presencial–. Su gasto medio duplica al observado en compradores noveles (con una media de 930€ anuales). Por tanto, los compradores constantes suponen una mayoría de los compradores con un gasto medio que dobla al comprador que ha adoptado el medio recientemente. Por consiguiente es de interés estudiar los factores que predicen que un internauta vuelva a adquirir un producto o servicio en la Red. La respuesta a esta pregunta no se ha revelado sencilla. En España, la mayoría de productos y servicios aún se adquieren de manera presencial, con una baja incidencia de las ventas a distancia como la teletienda, la venta por catálogo o la venta a través de Internet. Para dar respuesta a las preguntas planteadas se ha investigado desde distintos puntos de vista: se comenzará con un estudio descriptivo desde el punto de vista de la demanda que trata de caracterizar la situación del comercio electrónico B2C en España, poniendo el foco en las diferencias entre los compradores constantes y los nuevos compradores. Posteriormente, la investigación de modelos de adopción y continuidad en el uso de las tecnologías y de los factores que inciden en dicha continuidad –con especial interés en el comercio electrónico B2C–, permiten afrontar el problema desde la perspectiva de las ecuaciones estructurales pudiendo también extraer conclusiones de tipo práctico. Este trabajo sigue una estructura clásica de investigación científica: en el capítulo 1 se introduce el tema de investigación, continuando con una descripción del estado de situación del comercio electrónico B2C en España utilizando fuentes oficiales (capítulo 2). Posteriormente se desarrolla el marco teórico y el estado del arte de modelos de adopción y de utilización de las tecnologías (capítulo 3) y de los factores principales que inciden en la adopción y continuidad en el uso de las tecnologías (capítulo 4). El capítulo 5 desarrolla las hipótesis de la investigación y plantea los modelos teóricos. Las técnicas estadísticas a utilizar se describen en el capítulo 6, donde también se analizan los resultados empíricos sobre los modelos desarrollados en el capítulo 5. El capítulo 7 expone las principales conclusiones de la investigación, sus limitaciones y propone nuevas líneas de investigación. La primera parte corresponde al capítulo 1, que introduce la investigación justificándola desde un punto de vista teórico y práctico. También se realiza una breve introducción a la teoría del comportamiento del consumidor desde una perspectiva clásica. Se presentan los principales modelos de adopción y se introducen los modelos de continuidad de utilización que se estudiarán más detalladamente en el capítulo 3. En este capítulo se desarrollan los objetivos principales y los objetivos secundarios, se propone el mapa mental de la investigación y se planifican en un cronograma los principales hitos del trabajo. La segunda parte corresponde a los capítulos dos, tres y cuatro. En el capítulo 2 se describe el comercio electrónico B2C en España utilizando fuentes secundarias. Se aborda un diagnóstico del sector de comercio electrónico y su estado de madurez en España. Posteriormente, se analizan las diferencias entre los compradores constantes, principal interés de este trabajo, frente a los compradores noveles, destacando las diferencias de perfiles y usos. Para los dos segmentos se estudian aspectos como el lugar de acceso a la compra, la frecuencia de compra, los medios de pago utilizados o las actitudes hacia la compra. El capítulo 3 comienza desarrollando los principales conceptos sobre la teoría del comportamiento del consumidor, para continuar estudiando los principales modelos de adopción de tecnología existentes, analizando con especial atención su aplicación en comercio electrónico. Posteriormente se analizan los modelos de continuidad en el uso de tecnologías (Teoría de la Confirmación de Expectativas; Teoría de la Justicia), con especial atención de nuevo a su aplicación en el comercio electrónico. Una vez estudiados los principales modelos de adopción y continuidad en el uso de tecnologías, el capítulo 4 analiza los principales factores que se utilizan en los modelos: calidad, valor, factores basados en la confirmación de expectativas –satisfacción, utilidad percibida– y factores específicos en situaciones especiales –por ejemplo, tras una queja– como pueden ser la justicia, las emociones o la confianza. La tercera parte –que corresponde al capítulo 5– desarrolla el diseño de la investigación y la selección muestral de los modelos. En la primera parte del capítulo se enuncian las hipótesis –que van desde lo general a lo particular, utilizando los factores específicos analizados en el capítulo 4– para su posterior estudio y validación en el capítulo 6 utilizando las técnicas estadísticas apropiadas. A partir de las hipótesis, y de los modelos y factores estudiados en los capítulos 3 y 4, se definen y vertebran dos modelos teóricos originales que den respuesta a los retos de investigación planteados en el capítulo 1. En la segunda parte del capítulo se diseña el trabajo empírico de investigación definiendo los siguientes aspectos: alcance geográfico–temporal, tipología de la investigación, carácter y ambiente de la investigación, fuentes primarias y secundarias utilizadas, técnicas de recolección de datos, instrumentos de medida utilizados y características de la muestra utilizada. Los resultados del trabajo de investigación constituyen la cuarta parte de la investigación y se desarrollan en el capítulo 6, que comienza analizando las técnicas estadísticas basadas en Modelos de Ecuaciones Estructurales. Se plantean dos alternativas, modelos confirmatorios correspondientes a Métodos Basados en Covarianzas (MBC) y modelos predictivos. De forma razonada se eligen las técnicas predictivas dada la naturaleza exploratoria de la investigación planteada. La segunda parte del capítulo 6 desarrolla el análisis de los resultados de los modelos de medida y modelos estructurales construidos con indicadores formativos y reflectivos y definidos en el capítulo 4. Para ello se validan, sucesivamente, los modelos de medida y los modelos estructurales teniendo en cuenta los valores umbrales de los parámetros estadísticos necesarios para la validación. La quinta parte corresponde al capítulo 7, que desarrolla las conclusiones basándose en los resultados del capítulo 6, analizando los resultados desde el punto de vista de las aportaciones teóricas y prácticas, obteniendo conclusiones para la gestión de las empresas. A continuación, se describen las limitaciones de la investigación y se proponen nuevas líneas de estudio sobre distintos temas que han ido surgiendo a lo largo del trabajo. Finalmente, la bibliografía recoge todas las referencias utilizadas a lo largo de este trabajo. Palabras clave: comprador constante, modelos de continuidad de uso, continuidad en el uso de tecnologías, comercio electrónico, B2C, adopción de tecnologías, modelos de adopción tecnológica, TAM, TPB, IDT, UTAUT, ECT, intención de continuidad, satisfacción, confianza percibida, justicia, emociones, confirmación de expectativas, calidad, valor, PLS. ABSTRACT Information and Communication Technologies in general, but more specifically those related to the Internet in particular, have changed the way in which we communicate, relate to one another, produce, and buy and sell products, reducing the time and shortening the distance between suppliers and consumers. The steady breakthrough of computers, Smartphones and landline and/or wireless broadband has been greatly reflected in its large scale use by both individuals and businesses. Business–to–consumer (B2C) e–commerce reached a volume of 9,114 million Euros in Spain in 2010, representing a 17.4% increase with respect to the figure in 2009. This growth is due in part to two different facts: an increase in the percentage of web users to 65.1% en 2010, 43.1% of whom have acquired products or services through the Internet– which constitutes 1.6 percentage points higher than 2010. On the other hand, the average spending by individual buyers rose to 831€ en 2010, constituting a 10.9% increase with respect to the previous year. If we select buyers according to whether or not they have previously made some type of purchase, we can divide them into two categories: the novice buyer–who first made online purchases in 2010– and the experienced buyer: who also made purchases in 2010, but had done so previously as well. The socio–demographic profile of the novice buyer is that of a young person between 15–24 years of age, with secondary studies, middle to lower–middle class, and a non–university educated student who resides in smaller towns and continues to use payment methods such as cash on delivery (23.9%). In 2010, their average purchase grew to 449€. The more experienced buyer, or someone who has previously made purchases online, has a different demographic profile: highly educated, upper class, resident and worker in larger cities, who exercises a mature behavior when making online purchases due to their experience– this type of buyer frequently uses exclusive channels on the Internet that don’t have an actual store. His or her average purchase doubles that of the novice buyer (with an average purchase of 930€ annually.) That said, the experienced buyers constitute the majority of buyers with an average purchase that doubles that of novice buyers. It is therefore of interest to study the factors that help to predict whether or not a web user will buy another product or use another service on the Internet. The answer to this question has proven not to be so simple. In Spain, the majority of goods and services are still bought in person, with a low amount of purchases being made through means such as the Home Shopping Network, through catalogues or Internet sales. To answer the questions that have been posed here, an investigation has been conducted which takes into consideration various viewpoints: it will begin with a descriptive study from the perspective of the supply and demand that characterizes the B2C e–commerce situation in Spain, focusing on the differences between experienced buyers and novice buyers. Subsequently, there will be an investigation concerning the technology acceptance and continuity of use of models as well as the factors that have an effect on their continuity of use –with a special focus on B2C electronic commerce–, which allows for a theoretic approach to the problem from the perspective of the structural equations being able to reach practical conclusions. This investigation follows the classic structure for a scientific investigation: the subject of the investigation is introduced (Chapter 1), then the state of the B2C e–commerce in Spain is described citing official sources of information (Chapter 2), the theoretical framework and state of the art of technology acceptance and continuity models are developed further (Chapter 3) and the main factors that affect their acceptance and continuity (Chapter 4). Chapter 5 explains the hypothesis behind the investigation and poses the theoretical models that will be confirmed or rejected partially or completely. In Chapter 6, the technical statistics that will be used are described briefly as well as an analysis of the empirical results of the models put forth in Chapter 5. Chapter 7 explains the main conclusions of the investigation, its limitations and proposes new projects. First part of the project, chapter 1, introduces the investigation, justifying it from a theoretical and practical point of view. It is also a brief introduction to the theory of consumer behavior from a standard perspective. Technology acceptance models are presented and then continuity and repurchase models are introduced, which are studied more in depth in Chapter 3. In this chapter, both the main and the secondary objectives are developed through a mind map and a timetable which highlights the milestones of the project. The second part of the project corresponds to Chapters Two, Three and Four. Chapter 2 describes the B2C e–commerce in Spain from the perspective of its demand, citing secondary official sources. A diagnosis concerning the e–commerce sector and the status of its maturity in Spain is taken on, as well as the barriers and alternative methods of e–commerce. Subsequently, the differences between experienced buyers, which are of particular interest to this project, and novice buyers are analyzed, highlighting the differences between their profiles and their main transactions. In order to study both groups, aspects such as the place of purchase, frequency with which online purchases are made, payment methods used and the attitudes of the purchasers concerning making online purchases are taken into consideration. Chapter 3 begins by developing the main concepts concerning consumer behavior theory in order to continue the study of the main existing acceptance models (among others, TPB, TAM, IDT, UTAUT and other models derived from them) – paying special attention to their application in e–commerce–. Subsequently, the models of technology reuse are analyzed (CDT, ECT; Theory of Justice), focusing again specifically on their application in e–commerce. Once the main technology acceptance and reuse models have been studied, Chapter 4 analyzes the main factors that are used in these models: quality, value, factors based on the contradiction of expectations/failure to meet expectations– satisfaction, perceived usefulness– and specific factors pertaining to special situations– for example, after receiving a complaint justice, emotions or confidence. The third part– which appears in Chapter 5– develops the plan for the investigation and the sample selection for the models that have been designed. In the first section of the Chapter, the hypothesis is presented– beginning with general ideas and then becoming more specific, using the detailed factors that were analyzed in Chapter 4– for its later study and validation in Chapter 6– as well as the corresponding statistical factors. Based on the hypothesis and the models and factors that were studied in Chapters 3 and 4, two original theoretical models are defined and organized in order to answer the questions posed in Chapter 1. In the second part of the Chapter, the empirical investigation is designed, defining the following aspects: geographic–temporal scope, type of investigation, nature and setting of the investigation, primary and secondary sources used, data gathering methods, instruments according to the extent of their use and characteristics of the sample used. The results of the project constitute the fourth part of the investigation and are developed in Chapter 6, which begins analyzing the statistical techniques that are based on the Models of Structural Equations. Two alternatives are put forth: confirmatory models which correspond to Methods Based on Covariance (MBC) and predictive models– Methods Based on Components–. In a well–reasoned manner, the predictive techniques are chosen given the explorative nature of the investigation. The second part of Chapter 6 explains the results of the analysis of the measurement models and structural models built by the formative and reflective indicators defined in Chapter 4. In order to do so, the measurement models and the structural models are validated one by one, while keeping in mind the threshold values of the necessary statistic parameters for their validation. The fifth part corresponds to Chapter 7 which explains the conclusions of the study, basing them on the results found in Chapter 6 and analyzing them from the perspective of the theoretical and practical contributions, and consequently obtaining conclusions for business management. The limitations of the investigation are then described and new research lines about various topics that came up during the project are proposed. Lastly, all of the references that were used during the project are listed in a final bibliography. Key Words: constant buyer, repurchase models, continuity of use of technology, e–commerce, B2C, technology acceptance, technology acceptance models, TAM, TPB, IDT, UTAUT, ECT, intention of repurchase, satisfaction, perceived trust/confidence, justice, feelings, the contradiction of expectations, quality, value, PLS.

Aplicación móvil de localización de ocio para Android

¿No sabes dónde comer un plato típico cuando estás de vacaciones? ¿Quieres ir con amigos a comer a un sitio distinto? ¿Quieres disfrutar de esa comida que tanto te gusta y no sabes dónde hacerlo? Con afán de responder a estas preguntas y gracias a las capacidades que nos brindan las nuevas tecnologías de dispositivos móviles, surge la aplicación que se presenta en este proyecto fin de carrera. Se trata de una aplicación para dispositivos móviles con sistema operativo Android que nos brindará la opción de encontrar restaurantes en nuestro entorno que nos ofrezcan esa comida que queremos. Además, a modo de red social, incluye la opción de poder puntuar los platos degustados en los restaurantes e insertar restaurantes nuevos, lo que hace que la aplicación tenga una mayor versatilidad. En este documento se podrán encontrar los diagramas UML que modelan el proyecto, tanto la parte de la aplicación como la parte del servidor. En él también podremos encontrar otra documentación como: un manual de usuario de la aplicación, el código fuente de la misma y proposiciones de futuras versiones y mejoras de la aplicación actual. ABSTRACT. Don’t you know where you can eat a typical dish when you are on holidays? Do you want to go to eat to a different place? Do you want to enjoy that meal you love and you don’t know where you can do it? To answer those questions and thanks to the possibilities of modern smartphones’ technology, we present this application in my degree’s final project. This application, which runs with an Android operative system, gives us the option to find restaurants in our environment that offer the meal we really want. In addition, as a social network, it includes the option to rate the tasted dishes or to add new restaurants, giving the application versatility. Nowadays our society is used to the use of smartphones and their possibilities. That is why we must to explore its potential to obtain better amenities. In the last few years the amount of available applications for these devices has increased too much, offering a huge variety of them. If we realize a research about their functionalities and uses we will discover that most of them are oriented to leisure. That is why we are going to start the inquiry of a software engineering project developing a restaurant localization restaurant for Android smartphones, In this document you can find the UMI diagrams which model the project, both the application part and the server part. Besides, you can find other documents as: an application user manual, the source and proposals for future versions and improvements.

Testing of Android testing tools: development of a benchmark for the evaluation

With the ever growing trend of smart phones and tablets, Android is becoming more and more popular everyday. With more than one billion active users i to date, Android is the leading technology in smart phone arena. In addition to that, Android also runs on Android TV, Android smart watches and cars. Therefore, in recent years, Android applications have become one of the major development sectors in software industry. As of mid 2013, the number of published applications on Google Play had exceeded one million and the cumulative number of downloads was more than 50 billionii. A 2013 survey also revealed that 71% of the mobile application developers work on developing Android applicationsiii. Considering this size of Android applications, it is quite evident that people rely on these applications on a daily basis for the completion of simple tasks like keeping track of weather to rather complex tasks like managing one’s bank accounts. Hence, like every other kind of code, Android code also needs to be verified in order to work properly and achieve a certain confidence level. Because of the gigantic size of the number of applications, it becomes really hard to manually test Android applications specially when it has to be verified for various versions of the OS and also, various device configurations such as different screen sizes and different hardware availability. Hence, recently there has been a lot of work on developing different testing methods for Android applications in Computer Science fraternity. The model of Android attracts researchers because of its open source nature. It makes the whole research model more streamlined when the code for both, application and the platform are readily available to analyze. And hence, there has been a great deal of research in testing and static analysis of Android applications. A great deal of this research has been focused on the input test generation for Android applications. Hence, there are a several testing tools available now, which focus on automatic generation of test cases for Android applications. These tools differ with one another on the basis of their strategies and heuristics used for this generation of test cases. But there is still very little work done on the comparison of these testing tools and the strategies they use. Recently, some research work has been carried outiv in this regard that compared the performance of various available tools with respect to their respective code coverage, fault detection, ability to work on multiple platforms and their ease of use. It was done, by running these tools on a total of 60 real world Android applications. The results of this research showed that although effective, these strategies being used by the tools, also face limitations and hence, have room for improvement. The purpose of this thesis is to extend this research into a more specific and attribute-­‐ oriented way. Attributes refer to the tasks that can be completed using the Android platform. It can be anything ranging from a basic system call for receiving an SMS to more complex tasks like sending the user to another application from the current one. The idea is to develop a benchmark for Android testing tools, which is based on the performance related to these attributes. This will allow the comparison of these tools with respect to these attributes. For example, if there is an application that plays some audio file, will the testing tool be able to generate a test input that will warrant the execution of this audio file? Using multiple applications using different attributes, it can be visualized that which testing tool is more useful for which kinds of attributes. In this thesis, it was decided that 9 attributes covering the basic nature of tasks, will be targeted for the assessment of three testing tools. Later this can be done for much more attributes to compare even more testing tools. The aim of this work is to show that this approach is effective and can be used on a much larger scale. One of the flagship features of this work, which also differentiates it with the previous work, is that the applications used, are all specially made for this research. The reason for doing that is to analyze just that specific attribute in isolation, which the application is focused on, and not allow the tool to get bottlenecked by something trivial, which is not the main attribute under testing. This means 9 applications, each focused on one specific attribute. The main contributions of this thesis are: A summary of the three existing testing tools and their respective techniques for automatic test input generation of Android Applications. • A detailed study of the usage of these testing tools using the 9 applications specially designed and developed for this study. • The analysis of the obtained results of the study carried out. And a comparison of the performance of the selected tools.

Mobile assisted language learning : prototipo de la aplicación UP2B2

La forma de consumir contenidos en Internet ha cambiado durante los últimos años. Inicialmente se empleaban webs estáticas y con contenidos pobres visualmente. Con la evolución de las redes de comunicación, esta tendencia ha variado. A día de hoy, deseamos páginas agradables, accesibles y que nos presenten temas variados. Todo esto ha cambiado la forma de crear páginas web y en todos los casos se persigue el objetivo de atraer a los usuarios. El gran auge de los smartphones y las aplicaciones móviles que invaden el mercado actual han revolucionado el mundo del estudio de los idiomas permitiendo compatibilizar los recursos punteros con el aprendizaje tradicional. La popularidad de los dispositivos móviles y de las aplicaciones ha sido el principal motivo de la realización de este proyecto. En él se realizará un análisis de las diferentes tecnologías existentes y se elegirá la mejor opción que se ajuste a nuestras necesidades para poder desarrollar un sistema que implemente el enfoque llamado Mobile Assisted Language Learning (MALL) que supone una aproximación innovadora al aprendizaje de idiomas con la ayuda de un dispositivo móvil. En este documento se va a ofrecer una panorámica general acerca del desarrollo de aplicaciones para dispositivos móviles en el entorno del e-learning. Se estudiarán características técnicas de diferentes plataformas seleccionando la mejor opción para la implementación de un sistema que proporcione los contenidos básicos para el aprendizaje de un idioma, en este caso del inglés, de forma intuitiva y divertida. Dicho sistema permitirá al usuario mejorar su nivel de inglés mediante una interfaz web de forma dinámica y cercana empleando los recursos que ofrecen los dispositivos móviles y haciendo uso del diseño adaptativo. Este proyecto está pensado para los usuarios que dispongan de poco tiempo libre para realizar un curso de forma presencial o, mejor aún, para reforzar o repasar contenidos ya aprendidos por otros medios más tradicionales o no. La aplicación ofrece la posibilidad de que se haga uso del sistema de forma fácil y sencilla desde cualquier dispositivo móvil del que se disponga como es un smartphone, tablet o un ordenador personal, compitiendo con otros usuarios o contra uno mismo y mejorando así el nivel de partida a través de las actividades propuestas. Durante el proyecto se han comparado diversas soluciones, la mayoría de código abierto y de libre distribución que permiten desplegar servicios de almacenamiento accesibles mediante Internet. Se concluirá con un caso práctico analizando los requisitos técnicos y llevando a cabo las fases de análisis, diseño, creación de la base de datos, implementación y pruebas dentro del ciclo de vida del software. Finalmente, se migrará la aplicación con toda la información a un servidor en la nube. ABSTRACT. The way of consuming content on the Internet has changed over the past years. Initially, static websites were used with poor visual contents. Nevertheless, with the evolution of communication networks this trend has changed. Nowadays, we expect pleasant, accessible and varied topic pages and such expectations have changed the way to create web pages generally aiming at appealing and therefore, attracting users. The great boom of smartphones and mobile applications in the current market, have revolutionized the world of language learning as they make it possible to combine computing with traditional learning resources. The popularity of mobile devices and applications has been the main reason for the development of this project. Here, the different existing technologies will be examined and we will try to select the best option that adapts to our needs in order to develop a system that implements Mobile Assisted Language Learning (MALL) that in broad terms implies an approach to language learning with the help of a mobile device. This report provides an overview of the development of applications for mobile devices in the e-learning environment. We will study the technical characteristics of different platforms and we will select the best option for the implementation of a system that provide the basic content for learning a language, in this case English, by means of an intuitive and fun method. This system will allow the user to improve their level of English with a web interface in a dynamic and close way employing the resources offered by mobile devices using the adaptive design. This project is intended for users who do not have enough free time to make a classroom course or to review contents from more traditional courses as it offers the possibility to make use of the system quickly and easily from any mobile device available such as a smartphone, a tablet or a personal computer, competing with other users or against oneself and thus improving their departing level through different activities. During the project, different solutions have been compared. Most of them, open source and free distribution that allow to deploy storage services accessible via the Internet. It will conclude with a case study analyzing the technical requirements and conducting phases of analysis, design and creation of a database, implementation and testing in the software lifecycle. Finally, the application will be migrated with all the information to a server in the cloud.

Opportunities and challenges in the mobile media ecosystem

Increasing availability (andaffordability) of mobile broadband - In 2015 half of the subscriber base will be in 3G/4G, and 80% in 2020 (27% in 2011) - 7.6 billion mobile users by 2020 (5.4 billion in 2011). Mobile subscribers per 100 inhabitants:99%. Increasing availability (and affordability) of smartphones - In 2020 81% of phones sold globally will be smartphones (2.5 billion) from 26% in 2011 (400 million) - 595 million tablets in 2020 (70 million in 2011)

Opportunities and challenges of mobile social networks

Increasing availability (andaffordability) of mobile broadband - In 2015 half of the subscriber base will be in 3G/4G, and 80% in 2020 (27% in 2011) - 7.6 billion mobile users by 2020 (5.4 billion in 2011). Mobile subscribers per 100 inhabitants:99%. Increasing availability (and affordability) of smartphones - In 2020 81% of phones sold globally will be smartphones (2.5 billion) from 26% in 2011 (400 million) - 595 million tablets in 2020 (70 million in 2011)

Localization and activity detection Based on the fusion of environment And inertial sensors = Localización y detección de actividad Basadas en integración de sensores y dispositivos inerciales

Los sensores inerciales (acelerómetros y giróscopos) se han ido introduciendo poco a poco en dispositivos que usamos en nuestra vida diaria gracias a su minituarización. Hoy en día todos los smartphones contienen como mínimo un acelerómetro y un magnetómetro, siendo complementados en losmás modernos por giróscopos y barómetros. Esto, unido a la proliferación de los smartphones ha hecho viable el diseño de sistemas basados en las medidas de sensores que el usuario lleva colocados en alguna parte del cuerpo (que en un futuro estarán contenidos en tejidos inteligentes) o los integrados en su móvil. El papel de estos sensores se ha convertido en fundamental para el desarrollo de aplicaciones contextuales y de inteligencia ambiental. Algunos ejemplos son el control de los ejercicios de rehabilitación o la oferta de información referente al sitio turístico que se está visitando. El trabajo de esta tesis contribuye a explorar las posibilidades que ofrecen los sensores inerciales para el apoyo a la detección de actividad y la mejora de la precisión de servicios de localización para peatones. En lo referente al reconocimiento de la actividad que desarrolla un usuario, se ha explorado el uso de los sensores integrados en los dispositivos móviles de última generación (luz y proximidad, acelerómetro, giróscopo y magnetómetro). Las actividades objetivo son conocidas como ‘atómicas’ (andar a distintas velocidades, estar de pie, correr, estar sentado), esto es, actividades que constituyen unidades de actividades más complejas como pueden ser lavar los platos o ir al trabajo. De este modo, se usan algoritmos de clasificación sencillos que puedan ser integrados en un móvil como el Naïve Bayes, Tablas y Árboles de Decisión. Además, se pretende igualmente detectar la posición en la que el usuario lleva el móvil, no sólo con el objetivo de utilizar esa información para elegir un clasificador entrenado sólo con datos recogidos en la posición correspondiente (estrategia que mejora los resultados de estimación de la actividad), sino también para la generación de un evento que puede producir la ejecución de una acción. Finalmente, el trabajo incluye un análisis de las prestaciones de la clasificación variando el tipo de parámetros y el número de sensores usados y teniendo en cuenta no sólo la precisión de la clasificación sino también la carga computacional. Por otra parte, se ha propuesto un algoritmo basado en la cuenta de pasos utilizando informaiii ción proveniente de un acelerómetro colocado en el pie del usuario. El objetivo final es detectar la actividad que el usuario está haciendo junto con la estimación aproximada de la distancia recorrida. El algoritmo de cuenta pasos se basa en la detección de máximos y mínimos usando ventanas temporales y umbrales sin requerir información específica del usuario. El ámbito de seguimiento de peatones en interiores es interesante por la falta de un estándar de localización en este tipo de entornos. Se ha diseñado un filtro extendido de Kalman centralizado y ligeramente acoplado para fusionar la información medida por un acelerómetro colocado en el pie del usuario con medidas de posición. Se han aplicado también diferentes técnicas de corrección de errores como las de velocidad cero que se basan en la detección de los instantes en los que el pie está apoyado en el suelo. Los resultados han sido obtenidos en entornos interiores usando las posiciones estimadas por un sistema de triangulación basado en la medida de la potencia recibida (RSS) y GPS en exteriores. Finalmente, se han implementado algunas aplicaciones que prueban la utilidad del trabajo desarrollado. En primer lugar se ha considerado una aplicación de monitorización de actividad que proporciona al usuario información sobre el nivel de actividad que realiza durante un período de tiempo. El objetivo final es favorecer el cambio de comportamientos sedentarios, consiguiendo hábitos saludables. Se han desarrollado dos versiones de esta aplicación. En el primer caso se ha integrado el algoritmo de cuenta pasos en una plataforma OSGi móvil adquiriendo los datos de un acelerómetro Bluetooth colocado en el pie. En el segundo caso se ha creado la misma aplicación utilizando las implementaciones de los clasificadores en un dispositivo Android. Por otro lado, se ha planteado el diseño de una aplicación para la creación automática de un diario de viaje a partir de la detección de eventos importantes. Esta aplicación toma como entrada la información procedente de la estimación de actividad y de localización además de información almacenada en bases de datos abiertas (fotos, información sobre sitios) e información sobre sensores reales y virtuales (agenda, cámara, etc.) del móvil. Abstract Inertial sensors (accelerometers and gyroscopes) have been gradually embedded in the devices that people use in their daily lives thanks to their miniaturization. Nowadays all smartphones have at least one embedded magnetometer and accelerometer, containing the most upto- date ones gyroscopes and barometers. This issue, together with the fact that the penetration of smartphones is growing steadily, has made possible the design of systems that rely on the information gathered by wearable sensors (in the future contained in smart textiles) or inertial sensors embedded in a smartphone. The role of these sensors has become key to the development of context-aware and ambient intelligent applications. Some examples are the performance of rehabilitation exercises, the provision of information related to the place that the user is visiting or the interaction with objects by gesture recognition. The work of this thesis contributes to explore to which extent this kind of sensors can be useful to support activity recognition and pedestrian tracking, which have been proven to be essential for these applications. Regarding the recognition of the activity that a user performs, the use of sensors embedded in a smartphone (proximity and light sensors, gyroscopes, magnetometers and accelerometers) has been explored. The activities that are detected belong to the group of the ones known as ‘atomic’ activities (e.g. walking at different paces, running, standing), that is, activities or movements that are part of more complex activities such as doing the dishes or commuting. Simple, wellknown classifiers that can run embedded in a smartphone have been tested, such as Naïve Bayes, Decision Tables and Trees. In addition to this, another aim is to estimate the on-body position in which the user is carrying the mobile phone. The objective is not only to choose a classifier that has been trained with the corresponding data in order to enhance the classification but also to start actions. Finally, the performance of the different classifiers is analysed, taking into consideration different features and number of sensors. The computational and memory load of the classifiers is also measured. On the other hand, an algorithm based on step counting has been proposed. The acceleration information is provided by an accelerometer placed on the foot. The aim is to detect the activity that the user is performing together with the estimation of the distance covered. The step counting strategy is based on detecting minima and its corresponding maxima. Although the counting strategy is not innovative (it includes time windows and amplitude thresholds to prevent under or overestimation) no user-specific information is required. The field of pedestrian tracking is crucial due to the lack of a localization standard for this kind of environments. A loosely-coupled centralized Extended Kalman Filter has been proposed to perform the fusion of inertial and position measurements. Zero velocity updates have been applied whenever the foot is detected to be placed on the ground. The results have been obtained in indoor environments using a triangulation algorithm based on RSS measurements and GPS outdoors. Finally, some applications have been designed to test the usefulness of the work. The first one is called the ‘Activity Monitor’ whose aim is to prevent sedentary behaviours and to modify habits to achieve desired objectives of activity level. Two different versions of the application have been implemented. The first one uses the activity estimation based on the step counting algorithm, which has been integrated in an OSGi mobile framework acquiring the data from a Bluetooth accelerometer placed on the foot of the individual. The second one uses activity classifiers embedded in an Android smartphone. On the other hand, the design of a ‘Travel Logbook’ has been planned. The input of this application is the information provided by the activity and localization modules, external databases (e.g. pictures, points of interest, weather) and mobile embedded and virtual sensors (agenda, camera, etc.). The aim is to detect important events in the journey and gather the information necessary to store it as a journal page.

Integrated luminescent chemical microsensors based on GaN LEDs for security applications using smartphones

Development of PCB-integrateable microsensors for monitoring chemical species is a goal in areas such as lab-on-a-chip analytical devices, diagnostics medicine and electronics for hand-held instruments where the device size is a major issue. Cellular phones have pervaded the world inhabitants and their usefulness has dramatically increased with the introduction of smartphones due to a combination of amazing processing power in a confined space, geolocalization and manifold telecommunication features. Therefore, a number of physical and chemical sensors that add value to the terminal for health monitoring, personal safety (at home, at work) and, eventually, national security have started to be developed, capitalizing also on the huge number of circulating cell phones. The chemical sensor-enabled “super” smartphone provides a unique (bio)sensing platform for monitoring airborne or waterborne hazardous chemicals or microorganisms for both single user and crowdsourcing security applications. Some of the latest ones are illustrated by a few examples. Moreover, we have recently achieved for the first time (covalent) functionalization of p- and n-GaN semiconductor surfaces with tuneable luminescent indicator dyes of the Ru-polypyridyl family, as a key step in the development of innovative microsensors for smartphone applications. Chemical “sensoring” of GaN-based blue LED chips with those indicators has also been achieved by plasma treatment of their surface, and the micrometer-sized devices have been tested to monitor O2 in the gas phase to show their full functionality. Novel strategies to enhance the sensor sensitivity such as changing the length and nature of the siloxane buffer layer are discussed in this paper.

An Internet of Things approach for managing smart services provided by wearable devices.

The Internet of Things (IoT) is growing at a fast pace with new devices getting connected all the time. A new emerging group of these devices are the wearable devices, and Wireless Sensor Networks are a good way to integrate them in the IoT concept and bring new experiences to the daily life activities. In this paper we present an everyday life application involving a WSN as the base of a novel context-awareness sports scenario where physiological parameters are measured and sent to the WSN by wearable devices. Applications with several hardware components introduce the problem of heterogeneity in the network. In order to integrate different hardware platforms and to introduce a service-oriented semantic middleware solution into a single application, we propose the use of an Enterprise Service Bus (ESB) as a bridge for guaranteeing interoperability and integration of the different environments, thus introducing a semantic added value needed in the world of IoT-based systems. This approach places all the data acquired (e.g., via Internet data access) at application developers disposal, opening the system to new user applications. The user can then access the data through a wide variety of devices (smartphones, tablets, computers) and Operating Systems (Android, iOS, Windows, Linux, etc.).

Positional Accuracy in Smart-Phones and Its Effect on LBS Applications.

Location-based services (LBS) highly rely on the location of the mobile user in order to provide the service tailored to that location. This location is calculated differently depending on the technology available in the used mobile device. No matter which technology is used, the location will never be calculated 100% correctly; instead there will always be a margin of error generated during the calculation, which is referred to as positional accuracy. This research has reviewed the eight most common positioning technologies available in the major current smart-phones and assessed their positional accuracy with respect to its usage by LBS applications. Given the vast majority of these applications, this research classified them into thirteen categories, and these categories were also classified depending on their level criticality as low, medium, or high critical, and whether they function indoor or outdoor. The accuracies of different positioning technologies are compared to these two criteria. Low critical outdoor and high critical indoor applications were found technologically covered; high and medium critical outdoor ones weren?t fully resolved. Finally three potential solutions are suggested to be implemented in future smartphones to resolve this technological gap: Real-Time Kinematics Global Positioning System (RTK GPS), terrestrial transmitters, and combination of Wireless Sensors Network and Radio Frequency Identification (WSN-RFID).