Stability analysis of a free falling pararotor

The pararotor is a decelerator device based on the autorotation of a rotating wing. When it is dropped, it generates an aerodynamic force parallel to the main motion direction, acting as a decelerating force. In this paper, the rotational motion equations are shown for the vertical flight without any lateral wind component and some simplifying assumptions are introduced to obtain analytic solutions of the motion. First, the equilibrium state is obtained as a function of the main parameters. Then the equilibrium stability is analyzed. The motion stability depends on two nondimensional parameters, which contain geometric, inertia, and aerodynamic characteristics of the device. Based on these two parameters a stability diagram can be defined. Some stability regions with different types of stability trajectories (nodes, spirals, focuses) can be identified for spinning motion around axes close to the major, minor, and intermediate principal axes. It is found that the blades contribute to stability in a case of spin around the intermediate principal inertia axis, which is otherwise unstable. Subsequently, the equations for determining the angles of nutation and spin of the body are obtained, thus defining the orientation of the body for a stationary motion and the parameters on which that position depends.

Análisis y optimización de la resistencia de interferencia en multicascos

Esta tesis presenta un estudio de la resistencia de interferencia en multicascos, término que engloba las variaciones en la resistencia al avance debidas a la interacción entre cascos. Su característica más notable es que puede ser tanto positiva como negativa, contribuyendo favorablemente en este último caso a la reducción de la resistencia total. Su análisis permanece como un área activa dentro de la comunidad hidrodinámica, si bien se ha detectado una significativa falta de información experimental sobre el flujo entre cascos. En primer lugar se incluye una caracterización de los fenómenos de interferencia, evaluando su impacto en las diferentes componentes de la resistencia al avance. Al igual que la resistencia total, su predicción requiere el uso de técnicas experimentales o numéricas al ser inviable su solución analítica. Ambos procedimientos han sido considerados en esta tesis. El análisis experimental de la resistencia de interferencia supone el núcleo central del trabajo realizado. Se han ensayado dos geometrías diferentes, un catamarán de servicio comercial PESBO junto con un catamarán compuesto por dos Serie 60 (S60) en paralelo. Los ensayos se han llevado a cabo en dos canales de experiencias, CEHINAV y CEHIPAR, midiéndose resistencia al avance, asiento y trimados dinámicos, y cortes de olas en la zona entre cascos. Mención especial a estos últimos, dado que a pesar de ser en la zona central donde ocurren los principales efectos de interferencia, no se encontró información previa publicada en la literatura. Su medición requirió la fabricación de un sistema de soporte especifico para las probetas de medición. Por otro lado, aunque el Serie 60 es una geometría bien conocida en la comunidad hidrodinámica, a conocimiento del autor su comportamiento como multicasco no había sido aun caracterizado experimentalmente. Los bastidores de unión se fabricaron de forma que permitieran variar la separación entre cascos. Además, los multicascos son en general embarcaciones de alta velocidad mostrando asientos y trimados dinámicos significativos. Para cuantificar su efecto en la resistencia total y de interferencia se construyo un sistema de fijación del modelo al carro que los restringiera, posibilitando comparar los resultados en esta condición con los del modelo libre. Como resultado, se han obtenido resultados experimentales de las dos geometrías estudiadas con múltiples separaciones, incluyendo un solo casco, y con modelo fijo y libre. Una de las principales utilidades de los resultados experimentales es servir como referencia para validar modelos de predicción. Como primera aplicación, los datos experimentales obtenidos con el catamarán S60 se han contrastado con las predicciones numéricas de Yeung et al. (2004). El análisis numérico de la resistencia de interferencia se completa con la realización de simulaciones numéricas utilizando dos códigos substancialmente diferentes: Tdynlin y CD--‐Adapco Star--‐CCM+. Los cortes de olas obtenidos en las simulaciones se comparan con los valores experimentales, mostrándose además los campos de presiones y velocidades calculados sobre el casco. La principal aportación de esta tesis es una extensa caracterización experimental de los fenómenos de interferencia, con la intención de servir de referencia para futuros estudios con multicascos. El análisis de los resultados permite comprender mejor el impacto que la interacción entre cascos, así como las variaciones dinámicas de las condiciones de navegación, tienen en las diferentes componentes de la resistencia. Por otro lado, permite apreciar la dependencia de la resistencia de interferencia con la velocidad y separación entre cascos, de cara a su utilización como parámetro de diseño. ABSTRACT This thesis presents a study of the interference resistance in multihulls, which comprises all the variations in the ship resistance due to the interaction between hulls. Its most remarkable characteristic is that it can be positive or negative, contributing in the second case to the reduction of the total ship resistance. Its study remains an active area in the hydrodynamic community, although there is a significant lack of published experimental data regarding the flow between hulls. First of all, the interference phenomena are characterized, evaluating the impact in the different components of the ship resistance. Similar to the total resistance, their prediction requires experimental or numerical techniques, as no analytic solutions are known. Both procedures have been considered in this thesis. The experimental analysis of the interference resistance is the core of the work done. Two different geometries have been tested, a commercial catamaran PESBO and a catamaran composed by two parallel Series 60 (S60). The tests have been carried out in two towing tanks, CEHINAV and CEHIPAR, measuring ship resistance, dynamic sinkage and trim, and wave cuts in--‐between the hulls. Special mention to the wave cuts, as no previous published information was found regarding this zone, even if it is where the main interference effects happen. Their measurement required building a support tripod for the probes, specifically designed for this experimental campaign. In addition, although the Series 60 is a well known hull for experimental and computational analyses, to the author’s knowledge its behavior as a multihull had not yet been experimentally described. The connection frames between the hulls were built so they allowed adjusting the hull spacing. Furthermore, multihulls are usually high--‐speed vessels, acquiring significant dynamic sinkage and trim. To quantify the effect of these dynamic variations of the interference resistance, a clamping system was developed to fixed the model and compare the results with the free model condition. Thus, experimental results have been obtained for various hull separations with the two geometries analyzed, including a single hull, and with free and fixed model. One of the main applications of experimental results is to serve as a reference to validate prediction models. As a first step, the obtained experimental data with the catamaran S60 have been compared with the numerical predictions of Yeung et al. (2004). The numerical analysis of the interference resistance is completed with the inclusion of numerical simulations using two codes substantially different: Tdynlin and CD--‐Adapco Star--‐CCM+. The wave cuts obtained from the simulations are compared with the experimental ones, showing also the pressure and velocity fields over the hulls. The main contribution of this thesis is an extensive experimental characterization of the interference phenomena, aiming to serve as reference for future studies about multihulls. The analysis of the results provides insights into the impact that the interaction between hulls, as well as the dynamic variations of the sailing conditions, have in the different components of the ship resistance. Moreover, it allows us to observe the dependence of the interference resistance on the velocity and hull spacing, useful towards its use as a design parameter.

The analytic hierarchy process to support decision-making processes in infrastructure projects with social impact

There is an increasing awareness among all kinds of organisations (in business,government and civil society) about the benefits of jointly working with stakeholders to satisfy both their goals and the social demands placed upon them. This is particularly the case within corporate social responsibility (CSR) frameworks. In this regard, multi-criteria tools for decision-making like the analytic hierarchy process (AHP) described in the paper can be useful for the building relationships with stakeholders. Since these tools can reveal decision-maker’s preferences, the integration of opinions from various stakeholders in the decision-making process may result in better and more innovative solutions with significant shared value. This paper is based on ongoing research to assess the feasibility of an AHP-based model to support CSR decisions in large infrastructure projects carried out by Red Electrica de España, the sole transmission agent and operator of the Spanishelectricity system.