Territory and the governmentalisation of social reproduction: parliamentary enclosure and spatial rationalities in the transition from feudalism to capitalism

Recent applications of Foucauldian categories in geography, spatial history and the history of town planning have opened up interesting new perspectives, with respect to both the evolution of spatial knowledge and the genealogy of territorial techniques and their relation to larger socio-political projects, that would be enriched if combined with other discursive traditions. This article proposes to conceptualise English parliamentary enclosureea favourite episode for Marxist historiography, frequently read in a strictly materialist fashioneas a precedent of a new form of sociospatial governmentality, a political technology that inaugurates a strategic manipulation of territory for social change on the threshold between feudal and capitalist spatial rationalities. I analyse the sociospatial dimensions of parliamentary enclosure’s technical and legal innovations and compare them to the forms of communal self-regulation of land use customs and everyday regionalisations that preceded it. Through a systematic, replicable mechanism of reterritorialisation, enclosure acts normalised spatial regulations, blurred regional differences in the social organisation of agriculture and erased the modes of autonomous social reproduction linked to common land. Their exercise of dispossession of material resources, social capital and community representations is interpreted therefore as an inaugural logic that would pervade the emergent spatial rationality later known as planning.

Quality assurance systems in the production and marketing of fresh peaches.

Due to the fast rate of peach post-harvest ripening, damage due to mechanical handling, externally appreciated as bruises and soft areas, is a real problem that leads to an early harvesting and poor quality of the fruits, as perceived by the consumers. More and more, the European consumer asks for good taste and freshness of fruits and vegetables, and these quality factors are not included in standards, nor in most of the producers' practices. Fruit processing and marketing centres (co-operatives) are increasingly interested in adopting quality controls in their processes. ISO 9000 procedures are being applied in some food areas, primarily milk and meat processors, but no generalised procedures have been developed until the present time to be applied to fresh product processes. All different peach and nectarine varieties that are harvested and handled in Murcia cooperatives and sold in a large supermarket in Madrid were analysed during the whole 1997 season (early May to late August). A total number of 78 samples of 25 fruits (co-operative) or 10 fruits (market), were tested in the laboratory for mechanical, optical, chemical and tasting quality. The variability and relationships between all these quality parameters are presented and discussed, and sampling unit sizes which would be advisable for quality control are calculated.

Evaluating alternative industrial network organizations and information systems

Purpose – The purpose of this paper is to present a simulation‐based evaluation method for the comparison of different organizational forms and software support levels in the field of supply chain management (SCM). Design/methodology/approach – Apart from widely known logistic performance indicators, the discrete event simulation model considers explicitly coordination cost as stemming from iterative administration procedures. Findings - The method is applied to an exemplary supply chain configuration considering various parameter settings. Curiously, additional coordination cost does not always result in improved logistic performance. Influence factor variations lead to different organizational recommendations. The results confirm the high importance of (up to now) disregarded dimensions when evaluating SCM concepts and IT tools. Research limitations/implications – The model is based on simplified product and network structures. Future research shall include more complex, real world configurations. Practical implications – The developed method is designed for the identification of improvement potential when SCM software is employed. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and the method provides a comprehensive tool for strategic IT decision making. Originality/value – Reviewed literature is mostly focused on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but associated coordination cost has not been addressed by researchers.

Territory and the governmentalisation of social reproduction: parliamentary enclosure and spatial rationalities in the transition from feudalism to capitalism

Recent applications of Foucauldian categories in geography, spatial history and the history of town planning have opened up interesting new perspectives, with respect to both the evolution of spatial knowledge and the genealogy of territorial techniques and their relation to larger socio-political projects, that would be enriched if combined with other discursive traditions. This article proposes to conceptualise English parliamentary enclosureea favourite episode for Marxist historiography, frequently read in a strictly materialist fashioneas a precedent of a new form of sociospatial governmentality, a political technology that inaugurates a strategic manipulation of territory for social change on the threshold between feudal and capitalist spatial rationalities. I analyse the sociospatial dimensions of parliamentary enclosure’s technical and legal innovations and compare them to the forms of communal self-regulation of land use customs and everyday regionalisations that preceded it. Through a systematic, replicable mechanism of reterritorialisation, enclosure acts normalised spatial regulations, blurred regional differences in the social organisation of agriculture and erased the modes of autonomous social reproduction linked to common land. Their exercise of dispossession of material resources, social capital and community representations is interpreted therefore as an inaugural logic that would pervade the emergent spatial rationality later known as planning.

A multi-level analysis of innovation diffusion: The case of solar photovoltaic systems in Germany and the disillusion of grid parity

¿Suministrarán las fuentes de energía renovables toda la energía que el mundo necesita algún día? Algunos argumentan que sí, mientras que otros dicen que no. Sin embargo, en algunas regiones del mundo, la producción de electricidad a través de fuentes de energía renovables ya está en una etapa prometedora de desarrollo en la que su costo de generación de electricidad compite con fuentes de electricidad convencionales, como por ejemplo la paridad de red. Este logro ha sido respaldado por el aumento de la eficiencia de la tecnología, la reducción de los costos de producción y, sobre todo, los años de intervenciones políticas de apoyo financiero. La difusión de los sistemas solares fotovoltaicos (PV) en Alemania es un ejemplo relevante. Alemania no sólo es el país líder en términos de capacidad instalada de sistemas fotovoltaicos (PV) en todo el mundo, sino también uno de los países pioneros donde la paridad de red se ha logrado recientemente. No obstante, podría haber una nube en el horizonte. La tasa de difusión ha comenzado a declinar en muchas regiones. Además, las empresas solares locales – que se sabe son importantes impulsores de la difusión – han comenzado a enfrentar dificultades para manejar sus negocios. Estos acontecimientos plantean algunas preguntas importantes: ¿Es ésta una disminución temporal en la difusión? ¿Los adoptantes continuarán instalando sistemas fotovoltaicos? ¿Qué pasa con los modelos de negocio de las empresas solares locales? Con base en el caso de los sistemas fotovoltaicos en Alemania a través de un análisis multinivel y dos revisiones literarias complementarias, esta tesis doctoral extiende el debate proporcionando riqueza múltiple de datos empíricos en un conocimiento de contexto limitado. El primer análisis se basa en la perspectiva del adoptante, que explora el nivel "micro" y el proceso social que subyace a la adopción de los sistemas fotovoltaicos. El segundo análisis es una perspectiva a nivel de empresa, que explora los modelos de negocio de las empresas y sus roles impulsores en la difusión de los sistemas fotovoltaicos. El tercero análisis es una perspectiva regional, la cual explora el nivel "meso", el proceso social que subyace a la adopción de sistemas fotovoltaicos y sus técnicas de modelado. Los resultados incluyen implicaciones tanto para académicos como políticos, no sólo sobre las innovaciones en energía renovable relativas a la paridad de red, sino también, de manera inductiva, sobre las innovaciones ambientales impulsadas por las políticas que logren la competitividad de costes. ABSTRACT Will renewable energy sources supply all of the world energy needs one day? Some argue yes, while others say no. However, in some regions of the world, the electricity production through renewable energy sources is already at a promising stage of development at which their electricity generation costs compete with conventional electricity sources’, i.e., grid parity. This achievement has been underpinned by the increase of technology efficiency, reduction of production costs and, above all, years of policy interventions of providing financial support. The diffusion of solar photovoltaic (PV) systems in Germany is an important frontrunner case in point. Germany is not only the top country in terms of installed PV systems’ capacity worldwide but also one of the pioneer countries where the grid parity has recently been achieved. However, there might be a cloud on the horizon. The diffusion rate has started to decline in many regions. In addition, local solar firms – which are known to be important drivers of diffusion – have started to face difficulties to run their businesses. These developments raise some important questions: Is this a temporary decline on diffusion? Will adopters continue to install PV systems? What about the business models of the local solar firms? Based on the case of PV systems in Germany through a multi-level analysis and two complementary literature reviews, this PhD Dissertation extends the debate by providing multiple wealth of empirical details in a context-limited knowledge. The first analysis is based on the adopter perspective, which explores the “micro” level and the social process underlying the adoption of PV systems. The second one is a firm-level perspective, which explores the business models of firms and their driving roles in diffusion of PV systems. The third one is a regional perspective, which explores the “meso” level, i.e., the social process underlying the adoption of PV systems and its modeling techniques. The results include implications for both scholars and policymakers, not only about renewable energy innovations at grid parity, but also in an inductive manner, about policy-driven environmental innovations that achieve the cost competiveness.

Influence of termal fluctuations in radiation damage cascade production and defect dynamics in tungsten

The detailed study of the deterioration suffered by the materials of the components of a nuclear facility, in particular those forming part of the reactor core, is a topic of great interest which importance derives in large technological and economic implications. Since changes in the atomic-structural properties of relevant components pose a risk to the smooth operation with clear consequences for security and life of the plant, controlling these factors is essential in any development of engineering design and implementation. In recent times, tungsten has been proposed as a structural material based on its good resistance to radiation, but still needs to be done an extensive study on the influence of temperature on the behavior of this material under radiation damage. This work aims to contribute in this regard. Molecular Dynamics (MD) simulations were carried out to determine the influence of temperature fluctuations on radiation damage production and evolution in Tungsten. We have particularly focused our study in the dynamics of defect creation, recombination, and diffusion properties. PKA energies were sampled in a range from 5 to 50 KeV. Three different temperature scenarios were analyzed, from very low temperatures (0-200K), up to high temperature conditions (300-500 K). We studied the creation of defects, vacancies and interstitials, recombination rates, diffusion properties, cluster formation, their size and evolution. Simulations were performed using Lammps and the Zhou EAM potential for W

Performance Analysis of 10,000 Residential PV Systems in France and Belgium

The main objective of this paper is to review the state of the art of residential PV systems in France and Belgium. This is done analyzing the operational data of 10650 PV systems (9657 located in France and 993 in Belgium). Three main questions are posed. How much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? During the year 2010, the PV systems in France have produced a mean annual energy of 1163 kWh/kWp in France and 852 kWh/kWp in Belgium. As a whole, the orientation of PV generators causes energy productions to be some 7% inferior to optimally oriented PV systems. The mean Performance Ratio is 76% in France and 78% in Belgium, and the mean Performance Index is 85% in both countries. On average, the real power of the PV modules falls 4.9% below its corresponding nominal power announced on the manufacturer?s datasheet. A brief analysis by PV modules technology has lead to relevant observations about two technologies in particular. On the one hand, the PV systems equipped with Heterojunction with Intrinsic. Thin layer (HIT) modules show performances higher than average. On the other hand, the systems equipped with Copper Indium (di)Selenide (CIS) modules show a real power that is 16 % lower than their nominal value.

The role of cover crops in irrigated systems: Soil salinity and salt leaching

Soil salinity and salt leaching are a risk for sustainable agricultural production in many irrigated areas. This study was conducted over 3.5 years to determine how replacing the usual winter fallow with a cover crop (CC) affects soil salt accumulation and salt leaching in irrigated systems. Treatments studied during the period between summer crops were: barley (Hordeum vulgare L.), vetch (Vicia villosa L.) and fallow. Soil water content was monitored daily to a depth of 1.3 m and used with the numerical model WAVE to calculate drainage. Electrical conductivity (EC) was measured in soil solutions periodically, and in the soil saturated paste extracts before sowing CC and maize. Salt leaching was calculated multiplying drainage by total dissolved salts in the soil solution, and use to obtain a salt balance. Total salt leaching over the four winter fallow periods was 26 Mg ha−1, whereas less than 18 Mg ha−1 in the presence of a CC. Periods of salt gain occurred more often in the CC than in the fallow. By the end of the experiment, net salt losses occurred in all treatments, owing to occasional periods of heavy rainfall. The CC were more prone than the fallow to reduce soil salt accumulation during the early growth stages of the subsequent cash crop.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

La casa industrializada : seis propuestas para este milenio

La Casa Industrializada supone el ideal de realizar la casa unifamiliar a través de la potencia y los procedimientos de la industria. Como tal, la casa supone un producto industrial más sujeto a la lógica de la reproducción y del consumo. Como producto de consumo la casa debe establecerse como objeto de deseo, accesible al grupo de usuarios-consumidores al que va dirigido. El sueño de la Casa Industrializada se origina en la primera Revolución Industrial y se consolida en la segunda tras la producción del Ford T y la adhesión de los padres del movimiento moderno. A lo largo de su historia se han sucedido casos de éxito y fracaso, los primeros con la realización de un producto de imagen convencional y los segundos la mayor parte de las veces dirigidos por arquitectos. El sueño de la Casa Industrializada de la mano de arquitectos está comenzando a ser una realidad en Japón, Suecia y Estados Unidos a través de marcas como MUJI, Arkitekthus y Living Homes, pero aún dista de ser un hecho extendido en nuestra sociedad. Para que este ideal se cumpla deberá ofrecer valores que permita a la sociedad hacerlo suyo. La Tesis busca analizar la historia y la metodología de la Casa Industrializada, desde el diseño a la comercialización con el fin de ofrecer esos valores en forma de propuestas para la Casa Industrializada en este milenio. La casa como producto industrial-producto de consumo supera las lógicas tradicionales de la arquitectura para operar dentro del contexto de la producción industrial y la reproducción de los objetos. En este sentido es necesario establecer no solo la forma y construcción de la casa sino los mecanismos de reproducción con sus pertinentes eficiencias. La Casa industrializada no se construye, se monta, y para ello utiliza las estrategias de la construcción en seco, la prefabricación, el uso de componentes y los materiales ligeros. Desde la lógica del consumo, la casa debe dirigirse a un determinado público, no es más la casa para todos, característica de las situaciones de crisis y de emergencia. La casa se enfrenta a un mercado segmentado, tanto en cultura, como en deseos y poderes adquisitivos. En la cuestión del diseño debe plantearse más como diseño de producto que como diseño arquitectónico. La Casa Industrializada no es el fruto de un encargo y de una acción singular, debe ofrecerse lista para adquirir y para ser reproducida. Esta reproducción se puede dar tanto en la forma de modelos cerrados o sistemas abiertos que permitan la personalización por parte de los usuarios. Desde el ámbito cultural es necesario entender que la casa es más que una máquina de habitar, es un receptor de emociones, forma parte de nuestra memoria y nuestra cultura. La casa como producto social es una imagen de nosotros mismos, define la manera en la que nos situamos en el mundo y por tanto supone una definición de estatus. En esto, la Tesis se apoya en los textos de Baudrillard y su análisis de la sociedad de consumo y el papel de los objetos y su valor como signo. La Tesis realiza un repaso de los procedimientos industriales con especial énfasis en la producción automovilística y sitúa la evolución de la Casa Industrializada en relación a la evolución de los avances en los sistemas de producción industrial y las transferencias desde las industrias del automóvil y aeronáutica. La tesis se completa con una serie de casos de estudio que parten de las primeras casas de venta por correo de principios del siglo XX, pasando por las propuestas de Gropius, Fuller, el Case Study House Program, Prouvé, Sota y acaban con la situación actual. La Casa Industrializada ha mantenido una serie de valores a lo largo de su historia, como ideal, forma un cuerpo estable de propuestas que no se ha modificado a lo largo del tiempo. Con respecto a este nuevo milenio este ideal no debe ser cambiado sino simplemente actualizado y adaptado a los métodos de producción y las necesidades, sueños y exigencias de la sociedad de hoy. ABSTRACT The industrialized House provides an ideal to manufacture the house through the power and strategies of the industry. As such, the house becomes an industrial product that respond to the logic of reproduction and consumption. As a comodity, the house must become a desirable object, accessible to the group of the consumers to which is targeted The dream of the Industrialized home is originated in the First Industrial Revolution and it is consolidated in the second one after Ford´s production of Model T and the incorporation of the principal figures of the modern movement to the ideal of making houses at the factories. Throughout history there have been cases of success and failure, the first with the completion of a product of conventional image and the second most often led by architects. Industrialized dream house made by architects is starting to become a reality in Japan, Sweden and the United States through brands such as MUJI, Arkitekthus and Living Homes, but still far from beeing a widespread fact in our society. To fulfill this ideal, it should provide values that society could accept as of their own. The Thesis seeks to analyze the history and methodology of industrialized house, from design to marketing in order to offer these values in the form of proposals for industrialized house in this millennium. The house as an industrial-product-comodity extend beyond the traditional architectural logic to operate within the context of industrial production and the reproduction of objects. In this sense it is necessary to establish not only the shape and construction of the house but the mechanisms of reproduction with its relevant efficiencies. Industrialized house is not built it is assembled, and it uses the strategies of dry construction, prefabrication, using lightweight materials and components. From the logic of consumption, the house must go to a certain audience, it is no longer the home for all that is characteristic of crisis respond and emergency. The house faces a segmented market, both in culture and desires and purchasing power. On the question of design it must be considered more like product design than architectural design. Industrialized House is not the result of a commission and a singular action, it should be offered pret-a-porter and able to be reproduced. This reproduction can be given in form of closed or open systems models that allow its customization by users. From the cultural sphere is necessary to understand that the house is more than a machine for living, is a recipient of emotions, is part of our memory and our culture. The home as a social product is an image of ourselves, defines the way in which we place ourselves in the world and therefore represents a definition of status. In this aspect, the thesis is based on the texts of Baudrillard and his analysis of consumption society and the role of objects and its value as a sign in it. The thesis makes a review of the industrial processes with emphasis on automotive production and places the evolution of industrialized House in relation to the evolution of developments in industrial production systems and transfers from the automotive and aeronautics industries. The thesis is completed with a series of case studies that starts from the first mail order houses from the early twentieth century, going through the proposal of Gropius, Fuller, the Case Study House Program, Prouvé, Sota and end up with the current situation. Industrialized House has held a series of values throughout its history, as an ideal, forms a stable corps of proposals that has not changed over time. Regarding this new millennium this ideal should not be changed but simply be updated and adapted to production methods and needs, dreams and demands of today's society.