Conexión con la meseta desde el Ebro medio de las vías romanas como base de la malla territorial de España

No tenemos conocimiento de ninguna red de caminos prerromanos que sirvieran como base de una posible malla territorial de España. Sin embargo, una sociedad prerromana sin caminos, por muy fragmentada y aislada que fuera, es algo improbable y mucho menos en la Edad del Hierro. Por eso en época prerromana existían infinidad de caminos, muchos de los cuales hoy han desaparecido y otros han sobrevivido, casi siempre con sus recorridos mejorados. Los pueblos prerromanos aprovecharon vías naturales de comunicación (ríos, vados, valles, puertos naturales, llanuras, etc.) para tender sus caminos. En sus orígenes no siguieron pautas concretas, si no que los caminos se originaban por el tránsito (de personas, ganados, mercancías, etc.) de un lugar a otro. De este modo la red viaria prerromana era caótica y anárquica: todo camino tenía numerosos ramales y variantes, según las necesidades. Pendientes excesivas, anchuras variables, etc., en decir eran vías espontáneas, surgidas sin ninguna planificación aparente. Los recorridos en general eran cortos, aunque algunas investigaciones actuales están demostrando que algunas de las cañadas ganaderas más importantes, como la Galiana, y de largo recorrido, eran de origen prerromano. En el caso de la península Ibérica, y más concretamente en el caso de la Meseta, el territorio estaba fragmentado en diversos pueblos y tribus, agrupados según criterios étnicos y culturales y con contactos con los pueblos próximos que motivan la preponderancia de caminos de recorrido cortos. Solo la necesidad de llevar los rebaños (de cabras y ovejas sobre todo) desde las serranías en verano a las llanuras en invierno, motivaría viajes más largos en los que algunas cañadas ganaderas jugarían un papel más importante. Con la llegada de los romanaos, se implantó en Hispania una densa red viaria, cuya construcción se prolongó durante toda la dominación romana, siendo reparadas muchas calzadas y vías en varias ocasiones. En época romana la red caminera era variada y estaba constituida por “las calzadas” que comunicaban puntos importantes, eran muy transitadas, de ahí que la administración romana las mantuviera siempre en buen estado, para asegurar el intercambio comercial entre zonas distintas, cobro de impuestos, etc. “Los caminos de tierra (viae terrenae)” que además de las calzadas, que podemos asemejar a las actuales carreteras de primer y segundo orden, constituían la infinidad de caminos locales y comarcales. Los trazados se realizaron unos en época romana, y otros muchos apoyándose en los caminos de la época prerromana, éstas vías no se realizaban buscando el recorrido más corto entre dos puntos, ni tampoco el más cómodo y con un firme estructural de menor importancia que en las calzadas. Tampoco estaban hechos para un tipo concreto de transporte, por lo que nos encontraríamos algunos que por su anchura permitían el paso de carros, y otros que sólo permitirían el paso a pie, a caballo o en burro. Solían ser, como hemos indicado, caminos de tierra con acabados en zahorras y recorridos en su mayor parte cortos y medianos. Dentro de la malla territorial de España las calzadas constituirían las denominadas “viae publicae” que constituían la red principal y esqueleto vertebrador de Hispania. Los caminos de tierra constituirían los denominados “actus” caminos de carácter regional que configuraban la mayor parte de la red. Muchas de las “viae publicae” y de los “actus” tendrían su origen en las “viae militares” que habrían sido los primeros construidos, apoyándose en muchas ocasiones en los caminos prerromanos, por los romanos para realizar la conquista de Hispania y que luego con la Paz romana habrían tenido otro tipo de uso. Dentro de estas “viae militares” tuvieron una importancia relevancia aquellas que se utilizaron en la conquista de la Celtiberia, culminada con la caída de Numantia. Dentro de ellas tuvo una importancia fundamental la vía romana del río Alhama, objeto de esta Tesis, que facilitaría el desplazamiento de los ejércitos romanos desde Graccurris, primera ciudad romana fundada en el Ebro medio, hasta Numantia. Desde la época Augusta, la vía romana del río Alhama, pasaría a formar parte de los denominados “actus” formando parte de la malla territorial de la Península Ibérica como vía de comunicación entre la Meseta y el Ebro Medio. We do not have knowledge of any network of ways prerromanos that were serving as base of a possible territorial mesh of Spain. Nevertheless, a company prerromana without ways, for very fragmented and isolated that was, is something improbable and great less in the Age of the Iron. Because of it in epoch prerromana existed infinity of ways, many of which today have disappeared and others have survived, almost always with his improved tours. The people prerromanos took advantage of natural routes of communication (rivers, fords, valleys, natural ports, plains, etc.) to stretch his ways. In his origins concrete guidelines did not continue, if not that the ways were originating for the traffic (of persons, cattle, goods, etc.) to and from. Thus the network viaria prerromana was chaotic and anarchic: all way had numerous branches and variants, according to the needs. Excessive slopes, variable widths, etc., in saying were spontaneous routes arisen without no apparent planning. The tours in general were short, though some current investigations are demonstrating that some of the most important cattle glens, as the Galiana, and of crossed length, were of origin prerromano. In case of the Iberian Peninsula, and more concretely in case of the Plateau, the territory was fragmented in diverse peoples and tribes, grouped according to ethnic and cultural criteria and with contacts with the near peoples that motivate the prevalence of short ways of tour. Only the need to take the flocks (of goats and sheeps especially) from the mountainous countries in summer to the plains in winter, would motivate longer trips in which some cattle glens would play a more important paper. With the arrival of the romanos, a dense network was implanted in Roman Spain viaria, whose construction extended during the whole Roman domination, being repaired many causeways and routes in several occasions. In Roman epoch the pertaining to roads network was changed and constituted by " the causeways " that were communicating important points, they were very travelled, of there that the Roman administration was supporting always in good condition, to assure the commercial exchange between different zones, collection of taxes, etc. "The dirt tracks (viae terrenae)" that besides the causeways, which we can make alike to the current roads of the first and second order, were constituting the infinity of local and regional ways. The tracings were realized some in Roman epoch, and great others resting on the ways of the epoch prerromana, these routes were not realized looking for the most short tour neither between points, two nor neither most comfortable and with a structural road surface of minor importance that in the causeways. They were not also done for a concrete type of transport, for what some of us would think that for his width they were allowing the step of cars, and others that only would allow the step afoot, astride or in donkey. They were in the habit of being, since we have indicated, dirt tracks with ended in zahorras and tours in his most short and medium. Inside the territorial mesh of Spain the causeways would constitute the called ones "viae publicae" that constituted the principal network and skeleton vertebrador of Roman Spain. The dirt tracks would constitute the "actus” called ways of regional character that were forming most of the network. Many of "viae publicae" and of the "actus" they would have his origin in " viae military" that would have been the first ones constructed, resting on many occasions on the ways prerromanos, for the Romans to realize the conquest of Roman Spain and that then with the Roman Peace they would have had another type of use. Inside these "viae military" had an importance relevancy those that were in use in the conquest of the Celtiberia, reached with Numantia's fall. Inside them a fundamental importance had the Roman route of the river Alhama, object of this Thesis, which would facilitate the displacement of the Roman armies from Graccurris, the first Roman city been founded on the average Ebro, up to Numantia. From the August epoch, the Roman route of the river Alhama, would happen to form a part of the "actus” forming a part of the territorial mesh of the Iberian Peninsula as road link between the Plateau and the Average Ebro.

Evaluación cuantitativa de pérdidas por peligros geológicos. Caso del archipiélago de Canarias: Inundaciones, sismicidad y vulcanismo

Existe una creciente preocupación por las catástrofes de origen natural que están por llegar, motivo por el que se están realizando estudios desde prácticamente todas las ramas de la ciencia. La razón para ello se puede encontrar en el miedo a que los eventos futuros puedan dificultar las actividades humanas, aunque no es el único factor. Por todo ello, se produce una dispersión muy importante incluso en los conceptos más elementales como qué debe ser considerado o cómo debe llamarse y catalogarse uno u otro elemento. En consecuencia, los métodos para comprender los riesgos naturales también son muy diferentes, rara vez encontrándose enfoques realmente multidisciplinares. Se han realizado algunos esfuerzos para crear un marco de entendimiento común como por ejemplo, la "Directiva sobre inundaciones" o, más recientemente, la Directiva Inspire. Las entidades aseguradoras y reaseguradoras son un actor importante entre los muchos involucrados en los estudios de riesgos. Su interés radica en el hecho de que terminan pagando la mayor parte de la factura, si no toda. Pero, a cuánto puede ascender esa factura, no es una pregunta fácil de responder aún en casos muy concretos, y sin embargo, es la pregunta que constantemente se plantea por parte de los tomadores de decisiones a todos los niveles. Este documento resume las actividades de investigación que han llevado a cabo al objeto de sentar un marco de referencia, implementando de enfoques numéricos capaces de hacer frente a algunas de las cuestiones más relevantes que se encuentran en casi todos los estudios de riesgos naturales, ensayando conceptos de manera pragmática. Para ello, se escogió un lugar experimental de acuerdo a diferentes criterios, como la densidad de población, la facilidad de proporcionar los límites geográficos claros, la presencia de tres de los procesos geológicos más importantes (inundaciones, terremotos y vulcanismo) y la disponibilidad de datos. El modelo aquí propuesto aprovecha fuentes de datos muy diversas para evaluar los peligros naturales, poniendo de relieve la necesidad de un enfoque multidisciplinar y emplea un catálogo de datos único, unificado, independiente (no orientado), coherente y homogéneo para estimar el valor de las propiedades. Ahora bien, los datos se explotan de manera diferente según cada tipo de peligro, manteniendo sin variación los conceptos subyacentes. Durante esta investigación, se ha encontrado una gran brecha en la relación entre las pérdidas reales y las probabilidades del peligro, algo contrario a lo que se ha pensado que debía ser el comportamiento más probable de los riesgos naturales, demostrando que los estudios de riesgo tienen vida útil muy limitada. En parte debido ello, el modelo propuesto en este estudio es el de trabajar con escenarios, fijando una probabilidad de ocurrencia, lo que es contrario al modelo clásico de evaluar funciones continuas de riesgo. Otra razón para abordar la cuestión mediante escenarios es forzar al modelo para proporcionar unas cifras creíbles de daño máximo fijando cuestiones como la ubicación espacial de un evento y sus probabilidades, aportando una nueva visión del "peor escenario posible” de probabilidad conocida. ABSTRACT There is a growing concern about catastrophes of natural origin about to come hence many studies are being carried out from almost any science branch. Even though it is not the only one, fear for the upcoming events that might jeopardize any given human activity is the main motive. A forking effect is therefore heavily present even on the basic concepts of what is to be considered or how should it be named and catalogued; as a consequence, methods towards understanding natural risks also show great differences and a multidisciplinary approach has seldomly been followed. Some efforts were made to create a common understanding of such a matter, the “Floods Directive” or more recently the Inspire Directive, are a couple of examples. The insurance sector is an important actor among the many involved. Their interest relies on the fact that, eventually, they pay most of the bill if not all. But how much could that be is not an easy question to be answerd even in a very specific case, and it is almost always the question posed by decision makers at all levels. This document summarizes research activities that have being carried out in order to put some solid ground to be followed, implementing numerical approaches that are capable of coping with some of the most relevant issues found in almost all natural risk studies, testing concepts pragmatically. In order to do so, an experimental site was selected according to different criteria, such as population density, the ease of providing clear geographical boundaries, the presence of three of the most important geological processes (floods, earthquakes and volcanism) and data availability. The model herein proposed takes advantage of very diferent data sources in the assessment of hazard, pointing out how a multidisciplinary approach is needed, and uses only one unified, independent, consistent, homogeneous (non objective driven) source for assessing property value. Data is exploited differently according to each hazard type, but the underlying concepts remain the same. During this research, a deep detachment was found between actual loss and hazard chances, contrarily to what has been thought to be the most likely behaviour of natural hazards, proving that risk studies have a very limited lifespan. Partially because of such finding, the model in this study addresses scenarios with fixed probability of occurrence, as opposed to studying a continuous hazard function as usually proposed. Another reason for studying scenarios was to force the model to provide a reliable figure after a set of given parameters where fixed, such as the spatial location of an event and its chances, so the “worst case” of a given return period could be found.

Analyzing size-symmetric vs. size-asymmetric and intra-vs. inter-specific competition in beech (Fagus sylvatica L.) mixed stands

In mixed stands, inter-specific competition can be lower than intra-specific competition when niche complementarity and/or facilitation between species prevail. These positive interactions can take place at belowground and/or aboveground levels. Belowground competition tends to be size symmetric while the aboveground competition is usually for light and almost always size-asymmetric. Interactions between forest tree species can be explored analyzing growth at tree level by comparing intra and inter-specific competition. At the same time, possible causes of niche complementarity can be inferred relating intra and inter-specific competition with the mode of competition, i.e. size-symmetric or sizeasymmetric. The aim of this paper is to further our understanding of the interactions between species and to detect possible causes of competition reduction in mixed stands of beech (Fagus sylvatica L.) with other species: pine?beech, oak?beech and fir?beech. To test whether species growth is better explained by size-symmetric and/or size-asymmetric competition, five different competition structures where included in basal area growth models fitted using data from the Spanish National Forest Inventory for the Pyrenees. These models considered either size-symmetry only (Reineke?s stand density index, SDI), size-asymmetry only (SDI of large trees or SDI of small trees), or both combined. In order to assess the influence of the admixture, these indices were introduced in two different ways, one of which was to consider that trees of all species compete in a similar way, and the other was to split the stand density indices into intra- and inter-specific competition components. The results showed that in pine?beech mixtures, there is a slightly negative effect of beech on pine basal area growth while beech benefitted from the admixture of Scots pine; this positive effect being greater as the proportion of pine trees in larger size classes increases. In oak?beech mixtures, beech growth was also positively influenced by the presence of oaks that were larger than the beech trees. The growth of oak, however, decreased when the proportion of beech in SDI increased, although the presence of beech in larger size classes promoted oak growth. Finally, in fir?beech mixtures, neither fir nor beech basal area growth were influenced by the presence of the other species. The results indicate that size-asymmetric is stronger than size-symmetric competition in these mixtures, highlighting the importance of light in competition. Positive species interactions in size-asymmetric competition involved a reduction of asymmetry in tree size-growth relationships.

La ciudad y el viento : la morfología urbana y su relación con el uso estancial del espacio público abierto en territorios con vientos fuertes y climas fríos : el caso de la ciudad de Punta Arenas, región de Magallanes, Chile

El presente trabajo ahonda en el conocimiento del viento urbano. La investigación pasa revista a la historia de la relación del viento y la ciudad y revisa tres pares de disciplinas implicadas en comprender mejor dicha relación: la arquitectura y el urbanismo, la meteorología y la climatología y, por último, la ingeniería aeroespacial y la aerodinámica civil. Se estudian el comportamiento y la fluidez del viento al desplazarse por cuerpos romos no fuselados (los edificios y la trama urbana), así como sus efectos dentro de la ciudad. Asimismo, se examinan las metodologías existentes para comprenderlo, medirlo y analizarlo, desde los estudios de proporción y modelamiento en túneles de viento hasta las simulaciones virtuales y las dinámicas de fluidos CFD. Posteriormente se reconoce un caso de estudio que permite analizar el viento como un factor aislado, pero desde los parámetros morfológicos de una ciudad en la que se generan patrones aerodinámicos muy característicos: Punta Arenas, la ciudad más austral del mundo, donde los vientos corren casi siempre desde la misma dirección, el “oeste”, a más de 33,3 m/s, lo que equivale a 120 Km/h. La hipótesis de la investigación es que la morfología del casco histórico de Punta Arenas genera patrones aerodinámicos que condicionan el bienestar en los espacios públicos. El objetivo general de la investigación es estudiar los efectos aerodinámicos presentes en la morfología urbana para mejorar la permanencia en los espacios públicos, proponiendo estrategias para el desarrollo morfológico y volumétrico de los cuerpos edificados. En el desarrollo del caso de estudio se reconocen, al interior del cañón urbano, las temperaturas, los índices de asoleamiento y sus conos de sombra, la dirección del viento y la visualización del vórtice al interior del cañón urbano, para determinar cómo estos factores impactan en el espacio público. Las conclusiones indican que los patrones aerodinámicos presentes en la morfología urbana conducen el viento hacia los espacios públicos que se encuentran o desprotegidos del viento o con excesiva turbulencias, por tanto, los patrones aerodinámicos inciden en el uso estancial de los espacios públicos, generando problemas mecánicos al peatón e incidiendo en la sensación térmica en dichos espacios. Ello permite confirmar que es posible modificar y mejorar el uso de los espacios públicos si somos capaces de modelar la morfología urbana con el fin de reorientar los patrones aerodinámicos que afectan significativamente a dichos espacios. ABSTRACT This work deepens into the knowledge of urban wind. The study reviews the history of the relationship between the wind and the city and reviews three pairs of disciplines involved in understanding better these relationship: Architecture and Urbanism, Meteorology and Climatology and, finally, Aerospace and Civil Aerodynamics. The behavior and flow of wind through blunt bodies not fairings (the buildings and the urban fabric) and its effects within the city are studied. Also, existing methodologies to understand, measure and analyze the wind are examined, from the studios of proportion and modeling in wind tunnels to virtual simulations and fluid dynamics CFD. Subsequently, a case study to analyze the wind as an isolated factor is recognized, but from the morphological parameters of a city where very characteristic aerodynamic patterns are generated: Punta Arenas, the southernmost city in the world, where the winds run almost always from the same direction, the "West", at more than 33.3 m/s, which is equivalent to 120 km/h. The research hypothesis is that the morphology of the historic center of Punta Arenas generates aerodynamic patterns that determine the well-being in public spaces. The overall objective of the research is to study the aerodynamic effects present in the urban morphology to improve retention in public spaces, proposing strategies for morphological and volumetric development of the built bodies. In developing the case study are recognized, within the urban canyon, temperatures, rates of sunlight and shadow cones, wind direction and visualization of the vortex into the urban canyon, to determine how these factors impact in public space. The findings indicate that the aerodynamic patterns in urban morphology lead wind to public spaces that are unprotected or find themselves in a condition of excessive wind or turbulence; therefore, aerodynamic patterns affect the use of public spaces, generating mechanical problems for pedestrians and affecting the thermal sensation in such spaces. This confirms that it is possible to modify and improve the use of public spaces if we are able to model the urban morphology in order to reorient the aerodynamic patterns that significantly affect those spaces.

Construcción modular ligera energéticamente eficiente

Esta tesis trata sobre la construcción modular ligera, dentro del contexto de la eficiencia energética y de cara a los conceptos de nZEB (near Zero Energy Building) y NZEB (Net Zero Energy Building) que se manejan en el ámbito europeo y específicamente dentro del marco regulador de la Directiva 2010/31 UE. En el contexto de la Unión Europea, el sector de la edificación representa el 40% del total del consumo energético del continente. Asumiendo la necesidad de reducir este consumo se han planteado, desde los organismos de dirección europeos, unos objetivos (objetivos 20-20-20) para hacer más eficiente el parque edificatorio. Estos objetivos, que son vinculantes en términos de legislación, comprometen a todos los estados miembros a conseguir la meta de reducción de consumo y emisiones de GEI (Gases de Efecto Invernadero) antes del año 2020. Estos conceptos de construcción modular ligera (CML) y eficiencia energética no suelen estar asociados por el hecho de que este tipo de construcción no suele estar destinada a un uso intensivo y no cuenta con unos cerramientos con niveles de aislamiento de acuerdo a las normativas locales o códigos de edificación de cada país. El objetivo de nZEB o NZEB, e incluso Energy Plus, según sea el caso, necesariamente (y así queda establecido en las normativas), dependerá no sólo de la mejora de los niveles de aislamiento de los edificios, sino también de la implementación de sistemas de generación renovables, independientemente del tipo de sistema constructivo con el que se trabaje e incluso de la tipología edificatoria. Si bien es cierto que los niveles de industrialización de la sociedad tecnológica actual han alcanzado varias de las fases del proceso constructivo - sobre todo en cuanto a elementos compositivos de los edificios- también lo es el hecho de que las cotas de desarrollo conseguidas en el ámbito de la construcción no llegan al nivel de evolución que se puede apreciar en otros campos de las ingenierías como la aeronáutica o la industria del automóvil. Aunque desde finales del siglo pasado existen modelos y proyectos testimoniales de construcción industrializada ligera (CIL) e incluso ya a principios del siglo XX, ejemplos de construcción modular ligera (CML), como la Casa Voisin, la industrialización de la construcción de edificios no ha sido una constante progresiva con un nivel de comercialización equiparable al de la construcción masiva y pesada. Los términos construcción industrializada, construcción prefabricada, construcción modular y construcción ligera, no siempre hacen referencia a lo mismo y no siempre son sinónimos entre sí. Un edificio puede ser prefabricado y no ser modular ni ligero y tal es el caso, por poner un ejemplo, de la construcción con paneles de hormigón prefabricado. Lo que sí es una constante es que en el caso de la construcción modular ligera, la prefabricación y la industrialización, casi siempre vienen implícitas en muchos ejemplos históricos y actuales. Con relación al concepto de eficiencia energética (nZEB o incluso NZEB), el mismo no suele estar ligado a la construcción modular ligera y/o ligera industrializada; más bien se le ve unido a la idea de cerramientos masivos con gran inercia térmica propios de estándares de diseño como el Passivhaus; y aunque comúnmente a la construcción ligera se le asocian otros conceptos que le restan valor (corta vida útil; función y formas limitadas, fuera de todo orden estético; limitación en los niveles de confort, etc.), los avances que se van alcanzando en materia de tecnologías para el aprovechamiento de la energía y sistemas de generación renovables, pueden conseguir revertir estas ideas y unificar el criterio de eficiencia + construcción modular ligera. Prototipos y proyectos académicos– como el concurso Solar Decathlon que se celebra desde el año 2002 promovido por el DOE (Departamento de Energía de los Estados Unidos), y que cuenta con ediciones europeas como las de los años 2010 y 2012, replantean la idea de la construcción industrializada, modular y ligera dentro del contexto de la eficiencia energética, con prototipos de viviendas de ± 60m2, propuestos por las universidades concursantes, y cuyo objetivo es alcanzar y/o desarrollar el concepto de NZEB (Net Zero Energy Building) o edificio de energía cero. Esta opción constructiva no sólo representa durabilidad, seguridad y estética, sino también, rapidez en la fabricación y montaje, además de altas prestaciones energéticas como se ha podido demostrar en las sucesivas ediciones del Solar Decathlon. Este tipo de iniciativas de desarrollo de tecnologías constructivas, no sólo apuntan a la eficiencia energética sino al concepto global de energía neta, Energía plus o cero emisiones de CO2. El nivel de emisiones por la fabricación y puesta en obra de los materiales de construcción depende, en muchos casos, no solo de la propia naturaleza del material, sino también de la cantidad de recursos utilizados para producir una unidad de medida determinada (kg, m3, m2, ml, etc). En este sentido podría utilizarse, en muchos casos, el argumento válido de que a menos peso, y a menos tamaño, menos emisiones globales de gases de efecto invernadero y menos contaminación. Para el trabajo de investigación de esta tesis se han tomado como referencias válidas para estudio, prototipos tanto de CML (Modular 3D) como de CIL (panelizado y elementos 2D), dado que para los fines de análisis de las prestaciones energéticas de los materiales de cerramiento, ambos sistemas son equiparables. Para poder llegar a la conclusión fundamental de este trabajo de tesis doctoral - que consiste en demostrar la viabilidad tecnológica/ industrial que supone la combinación de la eficiencia energética y la construcción modular ligera - se parte del estudio del estado de la técnica ( desde la selección de los materiales y los posibles procesos de industrialización en fábrica, hasta su puesta en obra, funcionamiento y uso, bajo los conceptos de consumo cero, cero emisiones de carbono y plus energético). Además -y con un estado de la técnica que identifica la situación actual- se llevan a cabo pruebas y ensayos con un prototipo a escala natural y células de ensayo, para comprobar el comportamiento de los elementos compositivos de los mismos, frente a unas condicionantes climáticas determinadas. Este tipo de resultados se contrastan con los obtenidos mediante simulaciones informáticas basadas en los mismos parámetros y realizadas en su mayoría mediante métodos simplificados de cálculos, validados por los organismos competentes en materia de eficiencia energética en la edificación en España y de acuerdo a la normativa vigente. ABSTRACT This thesis discusses lightweight modular construction within the context of energy efficiency in nZEB (near Zero Energy Building) and NZEB (Net Zero Energy Building) both used in Europe and, specifically, within the limits of the regulatory framework of the EU Directive 2010/31. In the European Union the building sector represents 40% of the total energy consumption of the continent. Due to the need to reduce this consumption, European decision-making institutions have proposed aims (20-20-20 aims) to render building equipment more efficient. These aims are bound by law and oblige all member States to endeavour to reduce consumption and GEI emissions before the year 2020. Lightweight modular construction concepts and energy efficiency are not generally associated because this type of building is not normally meant for intensive use and does not have closures with insulation levels which fit the local regulations or building codes of each country. The objective of nZEB or NZEB and even Energy Plus, depending on each case, will necessarily be associated (as established in the guidelines) not only with the improvement of insulation levels in buildings, but also with the implementation of renewable systems of generation, independent of the type of building system used and of the building typology. Although it is true that the levels of industrialisation in the technological society today have reached several of the building process phases - particularly in the composite elements of buildings - it is also true that the quotas of development achieved in the area of construction have not reached the evolutionary levelfound in other fields of engineering, such as aeronautics or the automobile industry. Although there have been models and testimonial projects of lightweight industrialised building since the end of last century, even going back as far as the beginning of the XX century with examples of lightweight modular construction such as the Voisin House, industrialisation in the building industry has not been constant nor is its comercialisation comparable to massive and heavy construction. The terms industrialised building, prefabricated building, modular building and lightweight building, do not always refer to the same thing and they are not always synonymous. A building can be prefabricated yet not be modular or lightweight. To give an example, this is the case of building with prefabricated concrete panels. What is constant is that, in the case of lightweight modular construction, prefabrication and industrialisation are almost always implicit in many historical and contemporary examples. Energy efficiency (nZEB or even NZEB) is not normally linked to lightweight modular construction and/or industrialised lightweight; rather, it is united to the idea of massive closureswith high thermal inertia typical of design standards such as the Passive House; and although other concepts that subtract value from it are generally associated with lightweight building (short useful life, limited forms and function, inappropriate toany aesthetic pattern; limitation in comfort levels, etc.), the advances being achieved in technology for benefitting from energy and renewable systems of generation may well reverse these ideas and unify the criteria of efficiency + lightweight modular construction. Academic prototypes and projects - such as the Solar Decathlon competition organised by the US Department of Energy and celebrated since 2002, with its corresponding European events such as those held in 2010 and 2012, place a different slant on the idea of industrialised, modular and lightweight building within the context of energy efficiency, with prototypes of homes measuring approximately 60m2, proposed by university competitors, whose aim is to reach and/or develop the NZEB concept, or the zero energy building. This building option does not only signify durability, security and aesthetics, but also fast manufacture and assembly. It also has high energy benefits, as has been demonstrated in successive events of the Solar Decathlon. This type of initiative for the development of building technologies, does not only aim at energy efficiency, but also at the global concept of net energy, Energy Plus and zero CO2 emissions. The level of emissions in the manufacture and introduction of building materials in many cases depends not only on the inherent nature of the material, but also on the quantity of resources used to produce a specific unit of measurement (kg, m3, m2, ml, etc.). Thus in many cases itcould be validly arguedthat with less weight and smaller size, there will be fewer global emissions of greenhouse effect gases and less contamination. For the research carried out in this thesis prototypes such as the CML (3D Module) and CIL (panelled and elements) have been used as valid study references, becauseboth systems are comparablefor the purpose of analysing the energy benefits of closure materials. So as to reach a basic conclusion in this doctoral thesis - that sets out to demonstrate the technological/industrial viability of the combination of energy efficiency and lightweight modular construction - the departure point is the study of the state of the technique (from the selection of materials and the possible processes of industrialisation in manufacture, to their use on site, functioning and use, respecting the concepts of zero consumption, zero emissions of carbon and Energy Plus). Moreover, with the state of the technique identifying the current situation, tests and practices have been carried out with a natural scale prototype and test cells so as to verify the behaviour of the composite elements of these in certain climatic conditions. These types of result are contrasted with those obtained through computer simulation based on the same parameters and done, principally, using simplified methods of calculation, validated by institutions competent in energy efficiency in Spanish building and in line with the rules in force.

Continental Perspective 3, Spain

Well, I firmly believe that, as a professor, one has the duty, the obligation to show and explain his work. Not, of course, as a model to imitate, but rather as an opportunity to reflect upon that work. So, I will try to explain some of the considerations that were crucial in the development of each project. It is my hope that these reflections may be of interest to you, and due to my optimistic nature, that you may even enjoy it. Today I am going to present some projects, from a specific point of view: that of MATERIALITY. This is why I decided to title this presentation ARCHITEXTURE: that is, architecture from the point of view of texture, the quality of its material. Our architecture wants to pay attention to materials; we like to use very physical materials. We try to explore the expressive possibilities of different materials. That allows us, on the one hand, to try to master different techniques, and exploit their potential. On the other hand, it also avoids the dangers of style. Style is the death of an architect. When he starts repeating formulas, avoiding experimentation, copying himself, he dies of boredom, of intellectual boredom. Nevertheless, I don’t believe that the material itself determines anything. Architecture is an exercise of the freedom of an architect. Almost nothing is a given. Of course, there is the law of gravity and economic restraints, and even the overwhelming building code. But the most determinant factor is always the freedom of the architect, derived from his mastery of knowledge and culture, and his decision to innovate and to take risks

An example of Learning based on competences: Use of Maxima in Linear Algebra for Engineers

This paper analyzes the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is defined as an indicator of the generic ompetence: Use of Technology. Additionally, we show that using CAS could help to enhance the following generic competences: Self Learning, Planning and Organization, Communication and Writing, Mathematical and Technical Writing, Information Management and Critical Thinking.

Differential algebra techniques for space applications

This project investigates the utility of differential algebra (DA) techniques applied to the problem of orbital dynamics with initial uncertainties in the orbital determination of the involved bodies. The use of DA theory allows the splitting of a common Monte Carlo simulation in two parts: the generation of a Taylor map of the final states with regard to the perturbation in the initial coordinates, and the evaluation of the map for many points. A propagator is implemented exploiting DA techniques, and tested in the field of asteroid impact risk monitoring with the potentially hazardous 2011 AG5 and 2007 VK184 as test cases. Results show that the new method is able to simulate 2.5 million trajectories with a precision good enough for the impact probability to be accurately reproduced, while running much faster than a traditional Monte Carlo approach (in 1 and 2 days, respectively).

Contradictio in terminis: dialéctica de la ambigüedad en la arquitectura contemporánea

The twentieth century brought a new sensibility characterized by the discredit of cartesian rationality and the weakening of universal truths, related with aesthetic values as order, proportion and harmony. In the middle of the century, theorists such as Theodor Adorno, Rudolf Arnheim and Anton Ehrenzweig warned about the transformation developed by the artistic field. Contemporary aesthetics seemed to have a new goal: to deny the idea of art as an organized, finished and coherent structure. The order had lost its privileged position. Disorder, probability, arbitrariness, accidentality, randomness, chaos, fragmentation, indeterminacy... Gradually new terms were coined by aesthetic criticism to explain what had been happening since the beginning of the century. The first essays on the matter sought to provide new interpretative models based on, among other arguments, the phenomenology of perception, the recent discoveries of quantum mechanics, the deeper layers of the psyche or the information theories. Overall, were worthy attempts to give theoretical content to a situation as obvious as devoid of founding charter. Finally, in 1962, Umberto Eco brought together all this efforts by proposing a single theoretical frame in his book Opera Aperta. According to his point of view, all of the aesthetic production of twentieth century had a characteristic in common: its capacity to express multiplicity. For this reason, he considered that the nature of contemporary art was, above all, ambiguous. The aim of this research is to clarify the consequences of the incorporation of ambiguity in architectural theoretical discourse. We should start making an accurate analysis of this concept. However, this task is quite difficult because ambiguity does not allow itself to be clearly defined. This concept has the disadvantage that its signifier is as imprecise as its signified. In addition, the negative connotations that ambiguity still has outside the aesthetic field, stigmatizes this term and makes its use problematic. Another problem of ambiguity is that the contemporary subject is able to locate it in all situations. This means that in addition to distinguish ambiguity in contemporary productions, so does in works belonging to remote ages and styles. For that reason, it could be said that everything is ambiguous. And that’s correct, because somehow ambiguity is present in any creation of the imperfect human being. However, as Eco, Arnheim and Ehrenzweig pointed out, there are two major differences between current and past contexts. One affects the subject and the other the object. First, it’s the contemporary subject, and no other, who has acquired the ability to value and assimilate ambiguity. Secondly, ambiguity was an unexpected aesthetic result in former periods, while in contemporary object it has been codified and is deliberately present. In any case, as Eco did, we consider appropriate the use of the term ambiguity to refer to the contemporary aesthetic field. Any other term with more specific meaning would only show partial and limited aspects of a situation quite complex and difficult to diagnose. Opposed to what normally might be expected, in this case ambiguity is the term that fits better due to its particular lack of specificity. In fact, this lack of specificity is what allows to assign a dynamic condition to the idea of ambiguity that in other terms would hardly be operative. Thus, instead of trying to define the idea of ambiguity, we will analyze how it has evolved and its consequences in architectural discipline. Instead of trying to define what it is, we will examine what its presence has supposed in each moment. We will deal with ambiguity as a constant presence that has always been latent in architectural production but whose nature has been modified over time. Eco, in the mid-twentieth century, discerned between classical ambiguity and contemporary ambiguity. Currently, half a century later, the challenge is to discern whether the idea of ambiguity has remained unchanged or have suffered a new transformation. What this research will demonstrate is that it’s possible to detect a new transformation that has much to do with the cultural and aesthetic context of last decades: the transition from modernism to postmodernism. This assumption leads us to establish two different levels of contemporary ambiguity: each one related to one these periods. The first level of ambiguity is widely well-known since many years. Its main characteristics are a codified multiplicity, an interpretative freedom and an active subject who gives conclusion to an object that is incomplete or indefinite. This level of ambiguity is related to the idea of indeterminacy, concept successfully introduced into contemporary aesthetic language. The second level of ambiguity has been almost unnoticed for architectural criticism, although it has been identified and studied in other theoretical disciplines. Much of the work of Fredric Jameson and François Lyotard shows reasonable evidences that the aesthetic production of postmodernism has transcended modern ambiguity to reach a new level in which, despite of the existence of multiplicity, the interpretative freedom and the active subject have been questioned, and at last denied. In this period ambiguity seems to have reached a new level in which it’s no longer possible to obtain a conclusive and complete interpretation of the object because it has became an unreadable device. The postmodern production offers a kind of inaccessible multiplicity and its nature is deeply contradictory. This hypothetical transformation of the idea of ambiguity has an outstanding analogy with that shown in the poetic analysis made by William Empson, published in 1936 in his Seven Types of Ambiguity. Empson established different levels of ambiguity and classified them according to their poetic effect. This layout had an ascendant logic towards incoherence. In seventh level, where ambiguity is higher, he located the contradiction between irreconcilable opposites. It could be said that contradiction, once it undermines the coherence of the object, was the better way that contemporary aesthetics found to confirm the Hegelian judgment, according to which art would ultimately reject its capacity to express truth. Much of the transformation of architecture throughout last century is related to the active involvement of ambiguity in its theoretical discourse. In modern architecture ambiguity is present afterwards, in its critical review made by theoreticians like Colin Rowe, Manfredo Tafuri and Bruno Zevi. The publication of several studies about Mannerism in the forties and fifties rescued certain virtues of an historical style that had been undervalued due to its deviation from Renacentist canon. Rowe, Tafuri and Zevi, among others, pointed out the similarities between Mannerism and certain qualities of modern architecture, both devoted to break previous dogmas. The recovery of Mannerism allowed joining ambiguity and modernity for first time in the same sentence. In postmodernism, on the other hand, ambiguity is present ex-professo, developing a prominent role in the theoretical discourse of this period. The distance between its analytical identification and its operational use quickly disappeared because of structuralism, an analytical methodology with the aspiration of becoming a modus operandi. Under its influence, architecture began to be identified and studied as a language. Thus, postmodern theoretical project discerned between the components of architectural language and developed them separately. Consequently, there is not only one, but three projects related to postmodern contradiction: semantic project, syntactic project and pragmatic project. Leading these projects are those prominent architects whose work manifested an especial interest in exploring and developing the potential of the use of contradiction in architecture. Thus, Robert Venturi, Peter Eisenman and Rem Koolhaas were who established the main features through which architecture developed the dialectics of ambiguity, in its last and extreme level, as a theoretical project in each component of architectural language. Robert Venturi developed a new interpretation of architecture based on its semantic component, Peter Eisenman did the same with its syntactic component, and also did Rem Koolhaas with its pragmatic component. With this approach this research aims to establish a new reflection on the architectural transformation from modernity to postmodernity. Also, it can serve to light certain aspects still unaware that have shaped the architectural heritage of past decades, consequence of a fruitful relationship between architecture and ambiguity and its provocative consummation in a contradictio in terminis. Esta investigación centra su atención fundamentalmente sobre las repercusiones de la incorporación de la ambigüedad en forma de contradicción en el discurso arquitectónico postmoderno, a través de cada uno de sus tres proyectos teóricos. Está estructurada, por tanto, en torno a un capítulo principal titulado Dialéctica de la ambigüedad como proyecto teórico postmoderno, que se desglosa en tres, de títulos: Proyecto semántico. Robert Venturi; Proyecto sintáctico. Peter Eisenman; y Proyecto pragmático. Rem Koolhaas. El capítulo central se complementa con otros dos situados al inicio. El primero, titulado Dialéctica de la ambigüedad contemporánea. Una aproximación realiza un análisis cronológico de la evolución que ha experimentado la idea de la ambigüedad en la teoría estética del siglo XX, sin entrar aún en cuestiones arquitectónicas. El segundo, titulado Dialéctica de la ambigüedad como crítica del proyecto moderno se ocupa de examinar la paulatina incorporación de la ambigüedad en la revisión crítica de la modernidad, que sería de vital importancia para posibilitar su posterior introducción operativa en la postmodernidad. Un último capítulo, situado al final del texto, propone una serie de Proyecciones que, a tenor de lo analizado en los capítulos anteriores, tratan de establecer una relectura del contexto arquitectónico actual y su evolución posible, considerando, en todo momento, que la reflexión en torno a la ambigüedad todavía hoy permite vislumbrar nuevos horizontes discursivos. Cada doble página de la Tesis sintetiza la estructura tripartita del capítulo central y, a grandes rasgos, la principal herramienta metodológica utilizada en la investigación. De este modo, la triple vertiente semántica, sintáctica y pragmática con que se ha identificado al proyecto teórico postmoderno se reproduce aquí en una distribución específica de imágenes, notas a pie de página y cuerpo principal del texto. En la columna de la izquierda están colocadas las imágenes que acompañan al texto principal. Su distribución atiende a criterios estéticos y compositivos, cualificando, en la medida de lo posible, su condición semántica. A continuación, a su derecha, están colocadas las notas a pie de página. Su disposición es en columna y cada nota está colocada a la misma altura que su correspondiente llamada en el texto principal. Su distribución reglada, su valor como notación y su posible equiparación con una estructura profunda aluden a su condición sintáctica. Finalmente, el cuerpo principal del texto ocupa por completo la mitad derecha de cada doble página. Concebido como un relato continuo, sin apenas interrupciones, su papel como responsable de satisfacer las demandas discursivas que plantea una investigación doctoral está en correspondencia con su condición pragmática.

An integral model for natural regeneration of Pinus pinea L. in the Northern Plateau (Spain) = Modelo integral de regeneración natural para Pinus pinea L. en la Meseta Norte (España)

Natural regeneration is an ecological key-process that makes plant persistence possible and, consequently, it constitutes an essential element of sustainable forest management. In this respect, natural regeneration in even-aged stands of Pinus pinea L. located in the Spanish Northern Plateau has not always been successfully achieved despite over a century of pine nut-based management. As a result, natural regeneration has recently become a major concern for forest managers when we are living a moment of rationalization of investment in silviculture. The present dissertation is addressed to provide answers to forest managers on this topic through the development of an integral regeneration multistage model for P. pinea stands in the region. From this model, recommendations for natural regeneration-based silviculture can be derived under present and future climate scenarios. Also, the model structure makes it possible to detect the likely bottlenecks affecting the process. The integral model consists of five submodels corresponding to each of the subprocesses linking the stages involved in natural regeneration (seed production, seed dispersal, seed germination, seed predation and seedling survival). The outputs of the submodels represent the transitional probabilities between these stages as a function of climatic and stand variables, which in turn are representative of the ecological factors driving regeneration. At subprocess level, the findings of this dissertation should be interpreted as follows. The scheduling of the shelterwood system currently conducted over low density stands leads to situations of dispersal limitation since the initial stages of the regeneration period. Concerning predation, predator activity appears to be only limited by the occurrence of severe summer droughts and masting events, the summer resulting in a favourable period for seed survival. Out of this time interval, predators were found to almost totally deplete seed crops. Given that P. pinea dissemination occurs in summer (i.e. the safe period against predation), the likelihood of a seed to not be destroyed is conditional to germination occurrence prior to the intensification of predator activity. However, the optimal conditions for germination seldom take place, restraining emergence to few days during the fall. Thus, the window to reach the seedling stage is narrow. In addition, the seedling survival submodel predicts extremely high seedling mortality rates and therefore only some individuals from large cohorts will be able to persist. These facts, along with the strong climate-mediated masting habit exhibited by P. pinea, reveal that viii the overall probability of establishment is low. Given this background, current management –low final stand densities resulting from intense thinning and strict felling schedules– conditions the occurrence of enough favourable events to achieve natural regeneration during the current rotation time. Stochastic simulation and optimisation computed through the integral model confirm this circumstance, suggesting that more flexible and progressive regeneration fellings should be conducted. From an ecological standpoint, these results inform a reproductive strategy leading to uneven-aged stand structures, in full accordance with the medium shade-tolerant behaviour of the species. As a final remark, stochastic simulations performed under a climate-change scenario show that regeneration in the species will not be strongly hampered in the future. This resilient behaviour highlights the fundamental ecological role played by P. pinea in demanding areas where other tree species fail to persist.

Harmony: Towards automated self-adaptive consistency in cloud storage

In just a few years cloud computing has become a very popular paradigm and a business success story, with storage being one of the key features. To achieve high data availability, cloud storage services rely on replication. In this context, one major challenge is data consistency. In contrast to traditional approaches that are mostly based on strong consistency, many cloud storage services opt for weaker consistency models in order to achieve better availability and performance. This comes at the cost of a high probability of stale data being read, as the replicas involved in the reads may not always have the most recent write. In this paper, we propose a novel approach, named Harmony, which adaptively tunes the consistency level at run-time according to the application requirements. The key idea behind Harmony is an intelligent estimation model of stale reads, allowing to elastically scale up or down the number of replicas involved in read operations to maintain a low (possibly zero) tolerable fraction of stale reads. As a result, Harmony can meet the desired consistency of the applications while achieving good performance. We have implemented Harmony and performed extensive evaluations with the Cassandra cloud storage on Grid?5000 testbed and on Amazon EC2. The results show that Harmony can achieve good performance without exceeding the tolerated number of stale reads. For instance, in contrast to the static eventual consistency used in Cassandra, Harmony reduces the stale data being read by almost 80% while adding only minimal latency. Meanwhile, it improves the throughput of the system by 45% while maintaining the desired consistency requirements of the applications when compared to the strong consistency model in Cassandra.

Jerónimo Sánchez Carranza y la Escuela Española de Esgrima

El deporte de la esgrima no siempre ha sido considerado como actualmente se conoce, ni tampoco el empleo de las armas ha sido el mismo en las diferentes épocas de la historia. Si nos centramos en la española, podemos decir que se hablaba de una forma particular de hacer esgrima, la cual era muy apreciada por el resto de los países europeos. También lo era la que se hacía en Italia. Como cualquier actividad que se desarrolla a lo largo del tiempo debe generarse desde unos comienzos. Estos comienzos siempre están en relación a alguna causa. Para centrarnos en nuestro estudio, los comienzos del manejo de la espada, de una manera lógica y razonada, se une en la persona y en la vida de Jerónimo Sánchez Carranza porque hasta que él no se decide a estudiar en profundidad la ciencia de las armas, no se ve con claridad si todo lo que se hacía con ellas era correcto o no y si todo lo que la inmensa mayoría hacía cuando tenía que utilizarlas estaba revestido de cierta coherencia y fundamento, es decir, tenía su verdad que se pudiera demostrar. Carranza estudia la esgrima que se empleaba en su época y en las anteriores y se da cuenta que tiene que dar una nueva visión de la forma de usar las armas, diferente a lo que la gran mayoría entendía hasta entonces. A Carranza se le ha considerado por muchos autores como el inventor de la esgrima española, hecho que se puede leer con bastante facilidad si se hojea algún tratado que hable de la esgrima española, sin embargo también se habla de Luis Pacheco de Narváez asignándole el mismo calificativo, aunn- ;o es posteriora Carranza. or tanto nuestro estudio se ha centrado en la vida de Jerónimo Sánchez Carranza y en ueva forma de emplear las armas por lo que hace que la tesis sea una tesis biográfica de dicho personaje, donde se ha resaltado mucho más el aspecto del manejo de las armas, de la Destreza. Partimos de las siguientes hipótesis: Carranza es el que sienta los principios técnicos dando forma y coherencia a la escuela de esgrima española gracias a sus aportaciones en los distintos aspectos metodológicos, técnicos y tácticos. La escuela de esgrima española tiene una estructura interna, responde a unas características determinadas y sirve de base a la esgrima que posteriormente se practica. Para que el estudio se pudiera llevar a cabo tuvimos que diseñar un esquema donde se pudieran recoger todos los aspectos que estuvieran relacionados con nuestro autor, de ahí surge el porqué de cada uno de los capítulos que hemos confeccionado. Dicho esquema responde a la visión actual de diferentes facetas de lo que hoy se estudia en diversas ciencias y que cuando Carranza vivía aún no se conocían. Para recoger información sobre su persona y su obra tuvimos en cuenta los distintos lugares donde se podía localizar la documentación necesaria, sobre todo Bibliotecas y Archivos, para ir confeccionando el método de trabajo que consistió en la recopilación de fuentes de todo tipo referidas al tema, pasando luego a la interpretación de las mismas. Esto nos dio una visión de conjunto que hizo que nos adentráramos en aquellos aspectos que más tarde tendríamos que analizar con mucho más detenimiento. En la tesis se puede observar dos partes bien diferenciadas que son las relacionadas; por un lado, a su vida y su tratado y, por otro, al contenido de sus teorías que son realmente las que se deben analizar necesariamente bajo unos conocimientos específicos de la actividad de la esgrima. En cuanto a su vida, se han destacado y estudiado los hechos más importantes de los que hay que resaltar, sobre todo, el que fuera considerado como el inventor de la destreza y de la manera tan particular de concebir dicho arte, diferente a lo que hasta ahora se venía haciendo y que dio paso a lo que se entendió por esgrima científica, quedando plasmada de tal manera que dio pie a la creación de una doctrina y una nueva forma de entender la esgrima la cual generó una línea de actuación que fue continuada por numerosos seguidores. Para todo ello tuvo mucho que ver el que Carranza fuera militar, la cultura y los estudios que poseía, así como la situación en la que se encontraba España además de la gente con quien se relacionaba, que por lo general, era gente culta y de clase social alta. Se ha estudiado también dentro del mismo apartado de su vida unos hechos que se le imputan y que en nuestra opinión son erróneos. Hemos considerado como más relevantes el que Carranza no fue quien riñó con Quevedo como se afirma en algunas de las obras que hemos tratado, sino que fue Pacheco quien tuvo dicha riña, ya que más bien Quevedo se mostraba partidario de las enseñanzas de Carranza, estando en contra de Pacheco. Tampoco fue quien inventó el florete como se dice en algunas ocasiones, ya que el florete aparece posteriormente como un arma de estudio de la técnica de la esgrima. Con respecto al apartado de su obra, se debe decir que tan solo escribió un único tratado que se publicó en 1582, aunque estaba acabado desde el año 1569. En el apartado de su escuela se debe destacar los fundamentos en los que basó sus postulados para que la destreza alcanzara el mismo nivel de las demás artes liberales y que lo hizo a través del estudio de la propia destreza. A lo largo del estudio que hemos realizado se puede apreciar cómo se está generando un arte que hasta ahora no había sido estudiado, viéndose los problemas que ello suponía, desde la organización de la materia a tratar, hasta cómo se debía enseñar, pasando a veces a tener que denominar conceptos de nueva aparición o renombrar y modificar antiguos que estaban anclados en puntos de partida equivocados, siendo éstos los que mayor trabajo le supuso. Diferencia bien dos aspectos básicos que debían existir en cualquier arte y más concretamente en la destreza que son: la teoría y la práctica, ambas deben estar en base a la razón ya que sería una de las formas por la que la destreza perduraría en el tiempo, junto con que esta razón estuviera apoyada en otras ciencias y con los principios de ellas. Carranza fue de la opinión de que el diestro debía conocer mediante el estudio, los elementos fundamentales con los que había que trabajar la destreza, estos elementos son el cuerpo del diestro y las armas, porque ambos van a intervenir en cualquier gesto o acción que se vaya a realizar. Del cuerpo estudió cada una de las partes que más importancia tiene cada vez que el diestro interviene y lo hace sobre todo en base a la medicina, relacionándolo con las matemáticas para poder sacar el máximo provecho, aconsejando que por el conocimiento del propio cuerpo, como el del contrario, se podrá emplear en determinadas situaciones, que si no se supiera de ello, no se sacaría el mismo resultado. De las armas lo que más resaltó fue, por un lado, que la espada debía ser el único arma que el diestro debía utilizar y, por otro, el hecho de que la espada la graduara para poder demostrar que no se hacia todo igual con las distintas partes de la misma porque no todo el arma tenía las mismas propiedades cuando se actuaba con ella. Una de las recomendaciones que dio fue que con la parte más próxima a la empuñadura se debía practicar la defensa por tener más fuerza con esta parte que con la punta y lo demostró con principios matemáticos. Se puede ver con la lectura de la tesis cómo Carranza aporta una nueva forma de trabajo en la que le da mucha importancia a la aplicación de los conocimientos, que previamente se han adquirido y para ello, es importante conocer bien los puntos fuertes y débiles del adversario. La adquisición de la práctica se debe realizar a través de la repetición para crear el hábito necesario que haga que el gesto salga fluido en cada uno de los movimientos que el diestro ejecute. Todo esto no sería posible si quien lo enseña no conoce cada uno de los elementos que intervienen en la destreza, por tanto, a la figura del maestro le da un lugar de una gran relevancia, ya que va a ser él quien tenga que guiar a los alumnos que enseñe. Lo primero que debe hacer los maestros es procurar saber lo máximo de la materia que va a enseñar, por lo que el maestro debe saber casi todo sobre la teoría y la práctica de la destreza, pero además esta teoría y práctica debe ser la correcta. Carranza persigue con su estudio, establecer los principios de la destreza, por lo menos, los más importantes, aunque fueran elementales, para que posteriormente se siguiera trabajando sobre ellos y poder conseguir que la destreza tenga cuerpo y forma de arte liberal, pudiéndose estudiar como cualquier otra, así de esta manera se haría un bien público, ya que los jóvenes se instruirían eficazmente en el uso de las armas, aunque el verdadero fin se encuentra en la conservación de la vida como manda la Fe Católica, siendo la destreza uno de los medios más eficaces para conseguirlo. Hemos dedicado un apartado de técnica y de táctica donde se refleja todo lo relacionado con las posiciones y movimientos que debe realizar el diestro para llegar a conseguir su objetivo, que es herir sin ser herido. Se han analizado las distintas tretas y el porqué de cada una desde el punto de vista del gesto y del movimiento. Si lo que se hace en destreza se relaciona con el adversario, nos adentramos en el terreno de la táctica donde se han estudiado como más importantes los conceptos del tiempo y la distancia, así como las energías que debe conservar el diestro para poder llevar a cabo un combate y del mismo salir victorioso sin llegar al agotamiento. Concluimos diciendo que de todo el estudio que se ha realizado, se ha podido comprobar que Carranza fue quien dotó a la destreza de unos principios técnicos, tácticos y metodológicos, por su forma de concebir este nuevo arte, así como que por la manera en que estableció sus teorías hizo que la destreza que se practicaba en España disfrutara de una estructura interna coherente que perduró a través de los años. SUMMARY The sport of fencing has not always been the respected sport that we know it to be today ñor has the use of weapons been the same throughout history. If we concéntrate on Spainish weapons, we can say that one particular type of sword ¡s spoken about. this sword being very respected by outher European countries, it was also the one that was respected and used in Italy. As with any activity that develops in time, it must evlove from some simple beginnings. Such basics beginnings are always in relation to a cause. To concéntrate on our study, the beginnings are, the use of the sword in a reasoned and logical manner, brought together in the life and times of Jerónimo Sánchez Carranza because until he decided to study in depth the science of weapons, we cannot see with calrity if their use was correct or not and if the vast majority , when they had to use them, used any foundation or coherence, that ¡s to say if any exactness of logical use could be demonstrated. Carranza studied the sword used in his time and those that had gone before, bearing in mind that he had a new visión of the form of use of weapons, different to what the vast majority had until then understood. Carranza has been considered by many historians as the inventor of the Spanish sword, a fact which can be seen with relative ease if one flicks through any work which deals with the Spanish sword, however, they also speak of Luis Pacheco de Narváez affording him the same title, even though he followed Carranza. In ar H our study has been centred on the life of Jerónimo Sánchez Carranza and his ne-" use of weapons. In effect this thesis is a biographical thesis of the said wherein the aspect of the use of weapons stands out more than their mastery. Given the following hypothesis: It was Carranza who evolved the first techniques giving form and coherence to the .Spanish School of Fencing, thanks to his contributions to the different aspects of method, íechnique and tactic. The Spanish School of Fencing had an ¡nternal structure anaswerable to pre-detremined characteristics and served as a base for the fencing that was to, in later days, be practised. For this study to come to a head, we had to design a plan wherein we could collate all of the aspects we could, related to our inventor. From there springs the reason for each of the chapters that we have put together. The said plan responding to the actual visión of different facets that are studied today in different sciences, that were not known in Carranza's lifetime. To collect information on his person and his works we bore in mind the different places in which we could lócate the necessary documentation, above all in libraries and archives. Developing the work-method that consisted in extracing from every source, every thing relative to the theme, re-writing later our interpretation of the same. This brought us closer and made us focus of those aspects that much later we would have to analize in greater detail. In the thesis one can observe two defferent parts that are related; on the one hand his life and works and on the other his theories, which are those that should be really analised and as such, necessarily analised within the confines of a specific knowledge of fencing. In that his life has been isolated and studied the most important facts that stand out above all, is that he was considered to be the inventor of swordmanship and the particular manner of interpreting the said art, different to its interpretaion uptil then. It gave a footing to what they understood as scientific fencing, giving shape and form to the creation of a doctrine and a new form of fencing which developed a line of action that was continued by numerious followers. For all that, much had to do with the facts that Carranza was a military man, the culture, the level of studies he had and the situation in which he found himself. What's more the people with whom he mixed were, in general, cultured and of high social standing. We have also seen in the same article on his life some dubious facts which in our opinión are erróneos. We have considered the most relevent to be that it wasnt Carranza who was in dispute with Quevedo as is stated in some of the works with which we have dealt but rather it was with Pacheco he had such disputes. What's more Quevedo demonstrated his partiality to the teachings of Carranza, going against Pacheco ñor was it him who invented The Florete, a famous Spanish sword, as was said on some ocassions, eventhough the florete appeared later as a weapon in the study of fencing technique. With respect to the article on his works, we must say that there was only one article which was published in 1582, even though it was finished in 1569. In the article on his life one must distinguish between the foundations on which he based his teachings in which swordmanship reached the same levéis as other libral art forms and what he did through the study of the self same mastery. Throughout the study which we have done, one can appreciate how he was developing an art which uptill then had not been studied, seeing for himself the problems he had fortold, from the organisation of materials at hand to how it should be taught, at times having to domínate comparative concepts again or clarify and modify ones which were anchored in erróneos points of a fencing match, feeling these to be the main forseeable jobs-at-hand. Differenciating between two basic concepts which must exist in whatever arte form and more concretly in the skill that is; the theory and practice , both being fundamental to the reason why the skill endured through time, together with this reason he was supported by other sciences and the beginnings of such. Carranza was of the opinión that the swordsman must acquired by way of study, the fundemental elements with which he had to work, these elements being the body of the swordsman and the weapons, because both were going to intervene in whatever movement or action that was going to be taken. The body studied, each of the parts having more importance each time the skill intervened and above all what it did based on medicne relating it to matemathics to exact the máximum advantage, one could employ in certain circumstances, that if they were not employed, the same advantages would not result. On weapons, what resulted best was, on the one hand, the sword should be the only weapon that the swordsman should use and on the other hand, the sword should be graded to show that one cannot do the same with the different parts of the same because not all of the weapon had the same properties when used. One of the recomendations he made was that the part nearest to the hand-guard should be used for defence because one could use more forcé with it than the point and he demonstrated this with mathematical principies. One can see on reading this thesis how Carranza brought forth a new work form, in which he put much importance on the application of experience that had previously been acquired and because of it, it was important to know well the strenghts and weaknesses of an adversery. The acquisition of technique should be realised through repetition to form the habit necessary for movement to flow freely each time the swordsman executed a movement. None of this would be possible if whoever was teaching did not know each one of the elements that intervened, affording the fencing master a great reverence, in that it was he who had to guide the students he was to teach. The first thing that the master had to do was to make sure he had the maximun knowledge over which he was going to teach, to that end, the master had to know almost everything about the theory and practice of the skill of fencing but what's more that such theory and practice had to be the correct one. Carranza persued his studies, establishing the principies of technique, at least, the most important ones even though they were elementary, so that later they could continué working on them and it could be seen that the technique had a shape and form of any other art form, allowing it to be studied like any other form, as such it had a good following, even young people could be instructed in the correct use of weapons, however the real end could be found in the conservaron of life as ordered by the Catholic Church, feeling that skill with the sword was one of the most effective methods for assuring it. We have dedicated an article to technique and tactics wherein is reflected everything related to positions and movement that the swordsman must do to achieve his objective, that is, wound without being wounded. We have analised the different tricks and the reasons from every point of view of movement and action. If what is done by technique is related with the adversery we enter in the territory of tactics wherein we have studied, most importantly, the concepts of time and distance just as, the energy the swordsman muse conserve to bring to a head a bout and arrive victorious without being exhausted. We conclude by saying that everything that has been realised by this study, has shown that it was Carranza who gave to the skill, the first basic techniques, tactics and methodology, by his conception of this new art form, just as the manner in which he established his theories, made possible the tecnhiques practiced in Spain would enjoy an intemal coherent structure, which would endure throughout the years.

EMBT haciendo (casi) nada en Mercaders = EMBT doing (almost) nothing in Mercaders

Cualquier indagación sobre proyectos representativos en la historia contemporánea de la vivienda, nos lleva inevitablemente a darnos cuenta como predomina en gran parte de ellos una actitud que tiene que ver con producir indiscriminadamente nuevos productos arquitectónicos. EMBT construyen su propia casa en la calle Mercaders de Barcelona, e inciden en entender la arquitectura no como la creación de nuevos productos sino como una capa más dentro de un sustrato ya informado(materia no prima), una característica puramente postproductiva. Como ellos apuntan su nueva capa de información se ‘instala’, añade sólo información precisa de su tiempo, pero no intenta volver hacia atrás ni rehabilitar o restaurar el edificio existente. Esta comunicación persigue poner de manifiesto la existencia velada de esta otra actitud dentro del campo de la vivienda, una actitud no opuesta y si complementaria, que opera desde una voluntad de no ser, de hacer con (casi) nada. ABSTRACT: Any inquiry about representative projects in the contemporary history of housing, lead us to inevitably understand how in lots of them dominates an attitude related to the indiscriminate production of new architectural products. EMBT build their own house on Mercaders street of Barcelona, and promote the understanding of architecture not as the creation of new products but as a new layer within a substrate already full of information (not a raw material), a feature purely postproductive. As they point, the new information layer is ‘installed’, adds only precise information of its time, but does not try to get back or restore the existing building. This paper aims to demonstrate the veiled existence of this different attitude within the housing field, an attitude not opposed but complementary, that works from a desire of not to do, a desire to do with (almost) nothing.

Almost rejectionless sampling from Nakagami-m distributions (m ≥ 1)

The Nakagami-m distribution is widely used for the simulation of fading channels in wireless communications. A novel, simple and extremely efficient acceptance-rejection algorithm is introduced for the generation of independent Nakagami-m random variables. The proposed method uses another Nakagami density with a half-integer value of the fading parameter, mp ¼ n/2 ≤ m, as proposal function, from which samples can be drawn exactly and easily. This novel rejection technique is able to work with arbitrary values of m ≥ 1, average path energy, V, and provides a higher acceptance rate than all currently available methods. RESUMEN. Método extremadamente eficiente para generar variables aleatorias de Nakagami (utilizadas para modelar el desvanecimiento en canales de comunicaciones móviles) basado en "rejection sampling".

Resilience in Cloud Computing for Critical Systems. Resilience, Dependability, Reliability in the use of Cloud Computing in Critical Systems in Public Organizations.

La informática se está convirtiendo en la quinta utilidad (gas, agua, luz, teléfono) en parte debido al impacto de Cloud Computing en las mayorías de las organizaciones. Este uso de informática es usada por cada vez más tipos de sistemas, incluidos Sistemas Críticos. Esto tiene un impacto en la complejidad internad y la fiabilidad de los sistemas de la organización y los que se ofrecen a los clientes. Este trabajo investiga el uso de Cloud Computing por sistemas críticos, centrándose en las dependencias y especialmente en la fiabilidad de estos sistemas. Se han presentado algunos ejemplos de su uso, y aunque su utilización en sistemas críticos no está extendido, se presenta cual puede llegar a ser su impacto. El objetivo de este trabajo es primero definir un modelo que pueda representar de una forma cuantitativa las interdependencias en fiabilidad y interdependencia para las organizaciones que utilicen estos sistemas, y aplicar este modelo en un sistema crítico del campo de sanidad y mostrar sus resultados. Los conceptos de “macro-dependability” y “micro-dependability” son introducidos en el modelo para la definición de interdependencia y para analizar la fiabilidad de sistemas que dependen de otros sistemas. ABSTRACT With the increasing utilization of Internet services and cloud computing by most organizations (both private and public), it is clear that computing is becoming the 5th utility (along with water, electricity, telephony and gas). These technologies are used for almost all types of systems, and the number is increasing, including Critical Infrastructure systems. Even if Critical Infrastructure systems appear not to rely directly on cloud services, there may be hidden inter-dependencies. This is true even for private cloud computing, which seems more secure and reliable. The critical systems can began in some cases with a clear and simple design, but evolved as described by Egan to "rafted" networks. Because they are usually controlled by one or few organizations, even when they are complex systems, their dependencies can be understood. The organization oversees and manages changes. These CI systems have been affected by the introduction of new ICT models like global communications, PCs and the Internet. Even virtualization took more time to be adopted by Critical systems, due to their strategic nature, but once that these technologies have been proven in other areas, at the end they are adopted as well, for different reasons such as costs. A new technology model is happening now based on some previous technologies (virtualization, distributing and utility computing, web and software services) that are offered in new ways and is called cloud computing. The organizations are migrating more services to the cloud; this will have impact in their internal complexity and in the reliability of the systems they are offering to the organization itself and their clients. Not always this added complexity and associated risks to their reliability are seen. As well, when two or more CI systems are interacting, the risks of one can affect the rest, sharing the risks. This work investigates the use of cloud computing by critical systems, and is focused in the dependencies and reliability of these systems. Some examples are presented together with the associated risks. A framework is introduced for analysing the dependability and resilience of a system that relies on cloud services and how to improve them. As part of the framework, the concepts of micro and macro dependability are introduced to explain the internal and external dependability on services supplied by an external cloud. A pharmacovigilance model system has been used for framework validation.