New Schizosaccharomyces applications in red wines alcoholic fermentation

The Schizosaccharomyces strains consumed less primary amino nitrogen and produced less urea and more pyruvic acid than other Saccharomyces species. Further, three of the four Schizosaccharomyces strains completed the breakdown of malic acid by day 4 of fermentation. The main negative effect of the use of Schizosaccharomyces was strong acetic acid production. The Schizosaccharomyces strains that produced most pyruvic acid (938 and 936) were associated with better ?wine? colour than the remaining yeasts. The studied Schizosaccharomyces could therefore be of oenological interest.

Use of alternative fuels obtained from renewable sources in brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Use of alternative fuels obtained from renowable sources in Brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Utilización de bloqueadores metabólicos y optimización de las condiciones de aplicación para la reducción del grado alcohólico en vinos elaborados a partir de uva procedente de zonas cálidas

El presente trabajo de Tesis describe la posibilidad de modular la fermentación alcohólica utilizando bloqueadores metabólicos como furfural, o-vainillina, ácido cinámico, glicolaldehído, p-benzoquinona y cobre; para controlar la producción de etanol. El redireccionamiento de la ruta glicolítica en Saccharomyces cerevisiae favorece el descenso del grado alcohólico gracias al aumento de la producción de metabolitos secundarios de interés enológico. La primera parte de la Tesis presenta una revisión bibliográfica sobre estudios previos en los que se ha evaluado el efecto de los diferentes bloqueadores metabólicos en la producción de etanol durante la fermentación alcohólica. La segunda parte muestra los resultados experimentales de producción de etanol obtenidos con los bloqueadores metabólicos, observándose una amplia variabilidad en su efecto en función de la naturaleza química de cada bloqueador y de la naturaleza del medio fermentativo utilizado. Finalmente, la tercera parte del trabajo muestra el efecto de los bloqueadores metabólicos sobre los parámetros colorimétricos y la producción de metabolitos secundarios, observándose un importante efecto en la producción de glicerina y en algunos de los compuestos volátiles fermentativos. La principal aplicación de esta tecnología basada en la utilización de bloqueadores metabólicos sería la elaboración de vinos con una menor graduación alcohólica a partir de uva procedente de zonas cálidas. ABSTRACT This thesis describes the possibility of modulating the alcoholic fermentation using metabolic blockers such as furfural, o-vanillin, cinnamic acid, glycolaldehyde, p-benzoquinone and copper. The controlled production of ethanol by redirecting of the glycolytic pathway in Saccharomyces cerevisiae, is achieved through diverting some of the carbohydrates away from alcohol production into the formation of glycolytic intermediates of interest to the winemaking industry. The first part of this work shows a literature review on previous studies about the effect of different metabolic blockers in order to reduce the ethanol production during alcoholic fermentation. The second part deals about the experimental results of ethanol production obtained with the metabolic blockers, showing a wide variation in the inhibitory effect depending on the chemical nature of each blocker and the nature of the fermentation medium used. Finally, the third part discussed about the effect of the metabolic blockers on colorimetric parameters and production of secondary metabolites, showing a significant effect on the production of glycerol and in some of the volatile fermentative compounds. The main application of this technology based on the use of metabolic blockers could lie in the preparation of reduced-alcohol wines from grapes grown in hot climate regions.

Optimización de parámetros fermentativos de calidad en vinos tintos de zonas cálidas

El aumento progresivo de la temperatura media anual y el déficit hídrico están provocando importantes cambios en la composición y la maduración de la uva, que repercuten directamente sobre el proceso fermentativo y, por ende, sobre la calidad del vino elaborado. En este trabajo se evalúan diferentes estrategias para la reducción del grado alcohólico, la mejora del color del vino y su estabilidad, y el incremento y la persistencia aromática. Mediante el empleo de levaduras con ineficiencia glicolítica se lograron reducciones medias en el grado alcohólico de entre 0.3 y 1.7 % v/v, mientras que con las fermentaciones secuenciales la máxima reducción lograda fue de 3.3 y 3.4 % v/v al combinar las cepas 938 (Schizosaccharomyces pombe) y 7013 (Torulaspora delbrueckii) con la 7VA (Saccharomyces cerevisiae). Al aplicar un tratamiento térmico sobre el inóculo, la TP2A(16) mostró una reducción media significativa en el grado alcohólico de 1 % v/v. El principal inconveniente en todas las técnicas empleadas para reducir el grado alcohólico fue la falta de repetibilidad en los resultados obtenidos. Por otra parte, la aplicación de altas presiones sobre uva despalillada resultó efectiva como tratamiento de pasteurización y como potenciador de la extracción de polifenoles, logrando un incremento en el contenido medio de antocianos totales del 12.4-18.5 %. La adición de flavonoides al mosto estimuló la formación de pigmentos estables como resultado de su condensación con antocianos mediada por acetaldehído. Con el empleo de Torulaspora delbrueckii en fermentación secuencial fue posible incrementar la producción de diacetilo y acetato de 2-feniletilo, además de la síntesis de un nuevo compuesto, el 3-etoxi-1-propanol. Sin embargo, su aportación sobre el color fue nula, así que debería combinarse con una cepa de Saccharomyces cerevisiae con buena formación de pigmentos piranoantociánicos. El empleo de Schizosaccharomyces pombe (938, V1) y Torulaspora delbrueckii (1880) en fermentaciones secuenciales y mixtas con Saccharomyces cerevisiae permitió mejorar el perfil sensorial del vino tinto mediante la mayor síntesis de polioles y la potenciación de aromas frutales, florales y herbáceos, e incrementar la estabilidad de la materia colorante al favorecer la formación de vitisinas y piranoantocianos vinilfenólicos. La crianza sobre lías en barrica a partir de levaduras seleccionadas, puede mejorar la complejidad y persistencia aromática del vino tinto, aunque sin grandes cambios en el color. ABSTRACT The progressive increase in annual average temperature, along with water deficit, is causing significant changes in grape composition and in its maturation, which directly affects the fermentative process and hence alters wine quality. In this work, different strategies for reducing the alcoholic strength, improve wine color and its stability, and increase aromatic complexity and its persistence, are evaluated. By using yeasts with glycolytic inefficiency, it was possible to achieve mean reductions between 0.3 and 1.7 % v/v in the alcoholic strength, while sequential fermentations allowed a maximum reduction of 3.3 and 3.4 % v/v by combining strains 938 (Schizosaccharomyces pombe) and 7013 (Torulaspora delbrueckii) with 7VA (Saccharomyces cerevisiae). When applying a heat shock treatment on the inoculum, only TP2A(16) strain showed a significant mean reduction of 1 % v/v in the alcohol content, compared with the control. The main drawback in all the techniques used to reduce the alcohol content was the lack of repeatability in the results. Moreover, the application of high pressures on destemmed grapes was effective as pasteurization treatment and also as enhancer of polyphenol extraction, achieving an increase of 12.4-18.5% in the average content of total anthocyanins. As expected, addition of flavonoids to the must, stimulated the formation of stable pigments, mainly as a result of condensation reactions between anthocyanins and flavanols mediated by acetaldehyde. With the use of Torulaspora delbrueckii strains in sequential fermentation with Saccharomyces cerevisiae, it was possible to increase the production of diacetyl and 2-phenylethyl acetate, besides the synthesis of a new compound: 3-ethoxy-1-propanol. The use of Schizosaccharomyces pombe (938, V1) and Torulaspora delbrueckii (1880) strains in sequential and mixed fermentations with Saccharomyces cerevisiae improved the sensory profile of red wine by increasing polyols synthesis and enhancing fruity, floral and herbaceous aromas, and it also increased the stability of the coloring matter by favouring vitisins and vinylphenolic pyranoanthocyanins formation. Ageing on lees in barrels from selected yeasts can improve the complexity and aromatic persistence of red wine, without major changes in the color.

Soft solution fluorine-free synthesis of anatase nanoparticles with tailored morphology

TiO2 nanoparticles with tailored morphology have been synthesized under exceptionally soft conditions. The strategy is based on the use of a non-aqueous alcoholic reaction medium in which water traces, coming either from the air (atmospheric water) or from an ethanol–water azeotropic mixture (ethanol 96%), are incorporated in order to accelerate hydrolysis of the Ti–precursor. Moreover, organic surfactants have been used as capping agents so as to tailor crystal growth in certain preferential directions. Combinations of oleic acid and oleylamine, which lead to the formation of another surfactant, dioleamide, are employed instead of fluorine-based compounds, thus increasing the sustainability of the process. As a result, TiO2 nanostructured hierarchical microspheres and individual nanoparticles with exposed high-energy facets can be obtained at atmospheric pressure and temperatures as low as 78 °C.