The NACIR Project: New Applications for CPV'S: A fast way to improve reliability and Technology progress

The main goal of this proposal is to join together the owners of the most advanced CPV technology, with respect to the state of the art, in order to research from its leading position new applications for CPV systems. In addition to opening up new markets, it will unveil possible sources of failure in new environments outside Europe, in order to assure component reliability. The proposed project will also try to improve the current technology of the industrial partners (ISOFOTON and CONCENTRIX) by accelerating the learning curve that CPV must follow in order to reach the competitive market, and lowering the cost under the current flat panel PV significantly within 3-4 years. The use of CPV systems in remote areas, together with harsher radiation, ambient and infrastructure conditions will help to increase the rate of progress of this technology. In addition, the ISFOC s contribution, which brings together seven power plants from seven CPV technologies up to 3 MWpeak, will allow creating the most complete database of components and systems performance to be generated as well as the effects of radiation and meteorology on systems operations. Finally, regarding the new applications for CPV subject, the project will use a CPV system sized 25 kWp in a stand-alone station in Egypt (NWRC) for the first time for water pumping and irrigation purposes. In a similar way ISOFOTON will connect up to 25 kWp CPV to the Moroccan ONE utility grid. From the research content point of view of this project, which is directly addressed by the scope of the call, the cooperative research between UPM, FhG-ISE and the two companies will be favoured by the fact that all are progressing in similar directions: developing two-stage optics CPV systems. In addition to these technology improvements the UPM is very interested in developing a new concept of module, recently patented, which will fulfil all required characteristics of a good CPV with less components and reducing cost.

A static heap analysis for shape and connectivity: Unified memory analysis: The base framework

Modeling the evolution of the state of program memory during program execution is critical to many parallehzation techniques. Current memory analysis techniques either provide very accurate information but run prohibitively slowly or produce very conservative results. An approach based on abstract interpretation is presented for analyzing programs at compile time, which can accurately determine many important program properties such as aliasing, logical data structures and shape. These properties are known to be critical for transforming a single threaded program into a versión that can be run on múltiple execution units in parallel. The analysis is shown to be of polynomial complexity in the size of the memory heap. Experimental results for benchmarks in the Jolden suite are given. These results show that in practice the analysis method is efflcient and is capable of accurately determining shape information in programs that créate and manipúlate complex data structures.

An educational initiative between the Universidad Politécnica de Madrid and Spanish Young Generation in Nuclear (Jóvenes Nucleares): The Seminar of Nuclear Safety in Advanced Reactors

Jóvenes Nucleares (Spanish Young Generation in Nuclear, JJNN) is a non-profit organization and a commission of the Spanish Nuclear Society (SNE). The Universidad Politécnica de Madrid (Technical University of Madrid, UPM) is one of the most prestigious technical universities of Spain, and has a very strong curriculum in nuclear engineering training and research. Finishing 2009, JJNN and the UPM started to plan a new and first-of-a-kind Seminar in Nuclear Safety focused on the Advanced Reactors (Generation III, III+ and IV). The scope was to make a general description of the safety in the new reactors, comparing them with the built Generation II reactors from a technical point of view but simple and without the need of strong background in nuclear engineering to try to be interesting for the most number of people possible.

Uso de marcadores moleculares para la racionalización y evaluación de la calidad en las colecciones de Recursos Fitogenéticos de trigo

Esta tesis tiene dos objetivos generales: el primero, analizar el uso de proteínas del endospermo y SSRs para la racionalización de las colecciones de trigo, y el segundo, estudiar la influencia de las proteínas del endospermo, del año de cultivo y del abonado nitrogenado en la calidad en un grupo de variedades locales españolas. Dentro del primer objetivo, se estudió la diversidad genética de la colección de Triticum monococcum L. (escaña menor), y de una muestra de la colección de Triticum turgidum L. (trigo duro) del CRF-INIA, con 2 y 6 loci de gliadinas, y 6 y 24 SSRs, para la escaña menor y el trigo duro, respectivamente. Ambas colecciones presentaron una gran diversidad genética, con una gran diferenciación entre las variedades y pequeña dentro de ellas. Los loci de gliadinas mostraron una gran variabilidad, siendo los loci Gli-2 los más útiles para distinguir variedades. En la escaña menor, las gliadinas presentaron mayor poder de discriminación que los SSRs; aunque en trigo duro los SSRs identificaron más genotipos. El número de alelos encontrado fue alto; 24 y 38 en gliadinas, y 29 y 203 en SSRs, en escaña menor y trigo duro, respectivamente. En trigo duro, se identificaron 17 alelos nuevos de gliadinas lo que demuestra que el germoplasma español es muy singular. En ambas especies, se detectaron asociaciones entre la variación alélica en prolaminas y el origen geográfico y filogenético de las variedades. La utilidad de las proteínas (6 loci de gliadinas, 2 loci de gluteninas y proteína total) y de los SSRs (24 loci) para verificar duplicados, y analizar la variabilidad intraaccesión, se estudió en 23 casos de duplicados potenciales de trigo duro. Los resultados indicaron que tanto los biotipos como las accesiones duplicadas mostraban el mismo genotipo en gliadinas, pocas diferencias o ninguna en las subunidades de gluteninas HMW y proteína total, y diferencias en menos de tres loci de SSRs. El mismo resultado se obtuvo para los biotipos de la colección de T. monococcum. Sin embargo, las discrepancias observadas en algunos casos entre proteínas y SSRs demostraron la utilidad del uso conjunto de ambos tipos de marcadores. Tanto las proteínas como los SSRs mostraron gran concordancia con los caracteres agro-morfológicos, especialmente cuando las diferencias entre los genotipos eran grandes. Sin embargo, los caracteres agro-morfológicos fueron menos discriminantes que los marcadores moleculares. Para el segundo objetivo de la tesis, se analizó la variación alélica en siete loci de prolaminas relacionados con la calidad en trigo duro: Glu-A1 y Glu-B1 de gluteninas HMW, Glu-A3, Glu-B3 y Glu-B2 de gluteninas B-LMW, y Gli-A1 y Gli-B1 de gliadinas. La submuestra analizada incluía variedades locales de todas las provincias españolas donde se ha cultivado tradicionalmente el trigo duro. Todos los loci, excepto el Glu-B2, mostraron gran variabilidad genética, siendo los Glu-3 los más polimórficos. En total, se identificaron 65 alelos, de los que 29 eran nuevos, que representan una fuente importante de variabilidad genética para la mejora de la calidad. Se detectaron diferencias en la composición en prolaminas entre la convar. turgidum y la zona norte, y la convar. durum y la zona sur; el genotipo Glu-B3new-1 - Gli-B1new-1 fue muy común en la convar. turgidum, mientras que el Glu-B3a - Gli-B1c, asociado con mejor calidad, fue más frecuente en la convar. durum. En la convar. turgidum, se observó mayor variabilidad que en la convar. durum, principalmente en los loci Glu-B1 y Glu-B3, lo que indica que esta convariedad puede ser una fuente valiosa de nuevos alelos de gluteninas. Esta submuestra fue evaluada para calidad (contenido en proteína, P, y test de sedimentación, SDSS) con dos dosis de abonado nitrogenado (N), y en dos años diferentes. No se detectaron interacciones Variedad × Año, ni Variedad × N en la calidad. Para la P, los efectos ambientales (año y N) fueron mayores que el efecto de la variedad, siendo, en general, mayor la P con dosis altas de N. La variedad influyó más en el test SDSS, que no se vio afectado por el año ni el N. El aumento del contenido en proteína no influyó significativamente sobre la fuerza del gluten estimada con el SDSS. Respecto a la influencia de las prolaminas en la fuerza del gluten, se confirmó la superioridad del Glu-B3a; aunque también se detectó una influencia alta y positiva de los alelos nuevos Glu-A3new-1, y Glu-B3new-6 y new-9. La no correlación entre el rendimiento (evaluado en un trabajo anterior) y la P, en las variedades adaptadas a bajo N, permitió seleccionar cuatro variedades locales con alto rendimiento y buena fuerza del gluten para producción con bajo N. SUMMARY There are two main objectives in this thesis: The first, to analyse the use of endosperm proteins and SSRs to rationalize the wheat collections, and the second, to study the influence on quality of endosperm proteins, year and nitrogen fertilization in a group of Spanish landraces. For the first objective, we studied the genetic diversity of the collection of Triticum monococcum L. (cultivated einkorn), and of a sample of the collection of Triticum turgidum L. (durum wheat) maintained at the CRF-INIA. Two and 6 gliadin loci, and 6 and 24 SSRs, were used for einkorn and durum wheat, respectively. Both collections possessed a high genetic diversity, being the differentiation large between varieties and small within them. Gliadin loci showed great variability, being the loci Gli-2 the most useful for distinguish among varieties. In einkorn, the gliadins showed higher discrimination power than SSRs; although SSRs identified more genotypes in durum wheat. Large number of alleles were found; 24 and 38 in gliadins, and 29 and 203 in SSRs, for einkorn and durum wheat, respectively. In durum wheat, 17 new alleles of gliadins were identified, which indicate that Spanish durum wheat germplasm is rather unique. Some associations between prolamin alleles and geographical and phylogenetic origin of varieties were found in both species. The value of endosperm proteins (6 gliadin loci, 2 glutenin loci and total protein) and SSRs (24 loci) for validation of duplicates, and monitoring the intra-accession variability, was studied in 23 potential duplicates of durum wheat. The results indicated that biotypes and duplicated accessions showed identical gliadin genotype, few or none differences in HMW glutenin subunits and total protein, and less than three different SSR loci. A similar result was obtained for biotypes of T. monococcum. However, the discrepancies in some cases support the convenience to use together both marker systems. A good concordance among endosperm proteins, agro-morphological traits and SSRs were also found, mainly when differences between genotypes were high. However, agro-morphological traits discriminated less between accessions than molecular markers. For the second objective of the thesis, we analysed the allelic variation at seven prolamin loci, involved in durum wheat quality: Glu-A1 and Glu-B1 of HMW glutenin, Glu-A3, Glu-B3 and Glu-B2 of B-LMW glutenin, and Gli-A1 and Gli-B1 of gliadin. The subsample analysed included landraces from all the Spanish provinces where the crop was traditionally cultivated. All the loci, except for Glu-B2, showed high genetic variability, being Glu-3 the most polymorphic. A total of 65 alleles were studied, 29 of them being new, which represent an important source of variability for quality improvement. Differences in prolamin composition were detected between convar. turgidum and the North zone, and the convar. durum and the South zone; the genotype Glu-B3new-1 - Gli-B1new-1 was very common in the convar. turgidum, while the Glu- B3a - Gli-B1c, associated with better quality, was more frequent in the convar. durum. Higher variability was detected in the convar. turgidum than in the convar. durum, mainly at the Glu-B1 and Glu-B3, showing that this convariety could be a valuable source of new glutenin alleles. The subsample was evaluated for quality (protein content, P, and sedimentation test, SDSS) with two doses of nitrogen fertiliser (N), and in two different years. No significant Variety x Year or Variety x Nitrogen interactions were detected. For P, environmental (year and N) effects were higher than variety effect, being P values , in general, larger with high dose of N. The variety exhibited a strong influence on SDSS test, which was not affected by year and N. Increasing values of P did not significantly influence on gluten strength, estimated with the SDSS. Respect to the prolamin effects on gluten strength, the superiority of Glu-B3a was confirmed; although a high positive effect of the new alleles Glu-A3new-1, and Glu-B3new-6 and new-9 was also detected. The no correlation between yield (evaluated in a previous research) and P, in the landraces adapted to low N, allowed to select four landraces with high yield and high gluten strength for low N production.

Contribución al estudio del criptoanálisis y diseño de los criptosistemas caóticos

The extraordinary increase of new information technologies, the development of Internet, the electronic commerce, the e-government, mobile telephony and future cloud computing and storage, have provided great benefits in all areas of society. Besides these, there are new challenges for the protection of information, such as the loss of confidentiality and integrity of electronic documents. Cryptography plays a key role by providing the necessary tools to ensure the safety of these new media. It is imperative to intensify the research in this area, to meet the growing demand for new secure cryptographic techniques. The theory of chaotic nonlinear dynamical systems and the theory of cryptography give rise to the chaotic cryptography, which is the field of study of this thesis. The link between cryptography and chaotic systems is still subject of intense study. The combination of apparently stochastic behavior, the properties of sensitivity to initial conditions and parameters, ergodicity, mixing, and the fact that periodic points are dense, suggests that chaotic orbits resemble random sequences. This fact, and the ability to synchronize multiple chaotic systems, initially described by Pecora and Carroll, has generated an avalanche of research papers that relate cryptography and chaos. The chaotic cryptography addresses two fundamental design paradigms. In the first paradigm, chaotic cryptosystems are designed using continuous time, mainly based on chaotic synchronization techniques; they are implemented with analog circuits or by computer simulation. In the second paradigm, chaotic cryptosystems are constructed using discrete time and generally do not depend on chaos synchronization techniques. The contributions in this thesis involve three aspects about chaotic cryptography. The first one is a theoretical analysis of the geometric properties of some of the most employed chaotic attractors for the design of chaotic cryptosystems. The second one is the cryptanalysis of continuos chaotic cryptosystems and finally concludes with three new designs of cryptographically secure chaotic pseudorandom generators. The main accomplishments contained in this thesis are: v Development of a method for determining the parameters of some double scroll chaotic systems, including Lorenz system and Chua’s circuit. First, some geometrical characteristics of chaotic system have been used to reduce the search space of parameters. Next, a scheme based on the synchronization of chaotic systems was built. The geometric properties have been employed as matching criterion, to determine the values of the parameters with the desired accuracy. The method is not affected by a moderate amount of noise in the waveform. The proposed method has been applied to find security flaws in the continuous chaotic encryption systems. Based on previous results, the chaotic ciphers proposed by Wang and Bu and those proposed by Xu and Li are cryptanalyzed. We propose some solutions to improve the cryptosystems, although very limited because these systems are not suitable for use in cryptography. Development of a method for determining the parameters of the Lorenz system, when it is used in the design of two-channel cryptosystem. The method uses the geometric properties of the Lorenz system. The search space of parameters has been reduced. Next, the parameters have been accurately determined from the ciphertext. The method has been applied to cryptanalysis of an encryption scheme proposed by Jiang. In 2005, Gunay et al. proposed a chaotic encryption system based on a cellular neural network implementation of Chua’s circuit. This scheme has been cryptanalyzed. Some gaps in security design have been identified. Based on the theoretical results of digital chaotic systems and cryptanalysis of several chaotic ciphers recently proposed, a family of pseudorandom generators has been designed using finite precision. The design is based on the coupling of several piecewise linear chaotic maps. Based on the above results a new family of chaotic pseudorandom generators named Trident has been designed. These generators have been specially designed to meet the needs of real-time encryption of mobile technology. According to the above results, this thesis proposes another family of pseudorandom generators called Trifork. These generators are based on a combination of perturbed Lagged Fibonacci generators. This family of generators is cryptographically secure and suitable for use in real-time encryption. Detailed analysis shows that the proposed pseudorandom generator can provide fast encryption speed and a high level of security, at the same time. El extraordinario auge de las nuevas tecnologías de la información, el desarrollo de Internet, el comercio electrónico, la administración electrónica, la telefonía móvil y la futura computación y almacenamiento en la nube, han proporcionado grandes beneficios en todos los ámbitos de la sociedad. Junto a éstos, se presentan nuevos retos para la protección de la información, como la suplantación de personalidad y la pérdida de la confidencialidad e integridad de los documentos electrónicos. La criptografía juega un papel fundamental aportando las herramientas necesarias para garantizar la seguridad de estos nuevos medios, pero es imperativo intensificar la investigación en este ámbito para dar respuesta a la demanda creciente de nuevas técnicas criptográficas seguras. La teoría de los sistemas dinámicos no lineales junto a la criptografía dan lugar a la ((criptografía caótica)), que es el campo de estudio de esta tesis. El vínculo entre la criptografía y los sistemas caóticos continúa siendo objeto de un intenso estudio. La combinación del comportamiento aparentemente estocástico, las propiedades de sensibilidad a las condiciones iniciales y a los parámetros, la ergodicidad, la mezcla, y que los puntos periódicos sean densos asemejan las órbitas caóticas a secuencias aleatorias, lo que supone su potencial utilización en el enmascaramiento de mensajes. Este hecho, junto a la posibilidad de sincronizar varios sistemas caóticos descrita inicialmente en los trabajos de Pecora y Carroll, ha generado una avalancha de trabajos de investigación donde se plantean muchas ideas sobre la forma de realizar sistemas de comunicaciones seguros, relacionando así la criptografía y el caos. La criptografía caótica aborda dos paradigmas de diseño fundamentales. En el primero, los criptosistemas caóticos se diseñan utilizando circuitos analógicos, principalmente basados en las técnicas de sincronización caótica; en el segundo, los criptosistemas caóticos se construyen en circuitos discretos u ordenadores, y generalmente no dependen de las técnicas de sincronización del caos. Nuestra contribución en esta tesis implica tres aspectos sobre el cifrado caótico. En primer lugar, se realiza un análisis teórico de las propiedades geométricas de algunos de los sistemas caóticos más empleados en el diseño de criptosistemas caóticos vii continuos; en segundo lugar, se realiza el criptoanálisis de cifrados caóticos continuos basados en el análisis anterior; y, finalmente, se realizan tres nuevas propuestas de diseño de generadores de secuencias pseudoaleatorias criptográficamente seguros y rápidos. La primera parte de esta memoria realiza un análisis crítico acerca de la seguridad de los criptosistemas caóticos, llegando a la conclusión de que la gran mayoría de los algoritmos de cifrado caóticos continuos —ya sean realizados físicamente o programados numéricamente— tienen serios inconvenientes para proteger la confidencialidad de la información ya que son inseguros e ineficientes. Asimismo una gran parte de los criptosistemas caóticos discretos propuestos se consideran inseguros y otros no han sido atacados por lo que se considera necesario más trabajo de criptoanálisis. Esta parte concluye señalando las principales debilidades encontradas en los criptosistemas analizados y algunas recomendaciones para su mejora. En la segunda parte se diseña un método de criptoanálisis que permite la identificaci ón de los parámetros, que en general forman parte de la clave, de algoritmos de cifrado basados en sistemas caóticos de Lorenz y similares, que utilizan los esquemas de sincronización excitador-respuesta. Este método se basa en algunas características geométricas del atractor de Lorenz. El método diseñado se ha empleado para criptoanalizar eficientemente tres algoritmos de cifrado. Finalmente se realiza el criptoanálisis de otros dos esquemas de cifrado propuestos recientemente. La tercera parte de la tesis abarca el diseño de generadores de secuencias pseudoaleatorias criptográficamente seguras, basadas en aplicaciones caóticas, realizando las pruebas estadísticas, que corroboran las propiedades de aleatoriedad. Estos generadores pueden ser utilizados en el desarrollo de sistemas de cifrado en flujo y para cubrir las necesidades del cifrado en tiempo real. Una cuestión importante en el diseño de sistemas de cifrado discreto caótico es la degradación dinámica debida a la precisión finita; sin embargo, la mayoría de los diseñadores de sistemas de cifrado discreto caótico no ha considerado seriamente este aspecto. En esta tesis se hace hincapié en la importancia de esta cuestión y se contribuye a su esclarecimiento con algunas consideraciones iniciales. Ya que las cuestiones teóricas sobre la dinámica de la degradación de los sistemas caóticos digitales no ha sido totalmente resuelta, en este trabajo utilizamos algunas soluciones prácticas para evitar esta dificultad teórica. Entre las técnicas posibles, se proponen y evalúan varias soluciones, como operaciones de rotación de bits y desplazamiento de bits, que combinadas con la variación dinámica de parámetros y con la perturbación cruzada, proporcionan un excelente remedio al problema de la degradación dinámica. Además de los problemas de seguridad sobre la degradación dinámica, muchos criptosistemas se rompen debido a su diseño descuidado, no a causa de los defectos esenciales de los sistemas caóticos digitales. Este hecho se ha tomado en cuenta en esta tesis y se ha logrado el diseño de generadores pseudoaleatorios caóticos criptogr áficamente seguros.

The seminar of nuclear safety in advanced reactors and the seminar of nuclear fusion: two formative initiatives from Universidad Politécnica de Madrid and spanish young Generation in Nuclear (Jóvenes Nucleares)

panish Young Generation in Nuclear (Jóvenes Nucleares) is a commission of the Spanish Nuclear Society (SNE), whose main goals are to spread knowledge about nuclear energy among the society. Following this motivation, two Seminars have been carried out with the collaboration of the Technical University of Madrid: The Seminar of Nuclear Safety in Advanced Reactors (SRA) and the Seminar of Nuclear Fusion (SFN). The first one, which has been celebrated every year since 2010, aims to show clearly the advances that have been obtained in the section of safety with the new reactors, from a technical but simple point of view and without needing great previous nuclear engineering knowledge. The second one, which first edition was held in 2011, aims to give a general overview of the past, present and future situation of nuclear fusion technology, and was born as a result of the increasing interest of our Spanish Young Generation members in this technology.

Gestión de configuración y línea de productos para mejorar el proceso experimental en ingeniería del software

La Ingeniería del Software (IS) Empírica adopta el método científico a la IS para facilitar la generación de conocimiento. Una de las técnicas empleadas, es la realización de experimentos. Para que el conocimiento obtenido experimentalmente adquiera el nivel de madurez necesario para su posterior uso, es necesario que los experimentos sean replicados. La existencia de múltiples replicaciones de un mismo experimento conlleva la existencia de numerosas versiones de los distintos productos generados durante la realización de cada replicación. Actualmente existe un gran descontrol sobre estos productos, ya que la administración se realiza de manera informal. Esto causa problemas a la hora de planificar nuevas replicaciones, o intentar obtener información sobre las replicaciones ya realizadas. Para conocer con detalle la dimensión del problema a resolver, se estudia el estado actual de la gestión de materiales experimentales y su uso en replicaciones, así como de las herramientas de gestión de materiales experimentales. El estudio concluye que ninguno de los enfoques estudiados proporciona una solución al problema planteado. Este trabajo persigue como objetivo mejorar la administración de los materiales experimentales y replicaciones de experimentos en IS para dar soporte a la replicación de experimentos. Para satisfacer este objetivo, se propone la adopción en experimentación de los paradigmas de Gestión de Configuración del Software (GCS) y Línea de Producto Software (LPS). Para desarrollar la propuesta se decide utilizar el método de investigación acción (en inglés action research). Para adoptar la GCS a experimentación, se comienza realizando un estudio del proceso experimental como transformación de productos; a continuación, se realiza una adopción de conceptos fundamentada en los procesos del desarrollo software y de experimentación; finalmente, se desarrollan un conjunto de instrumentos, que se incorporan a un Plan de Gestión de Configuración de Experimentos (PGCE). Para adoptar la LPS a experimentación, se comienza realizando un estudio de los conceptos, actividades y fases que fundamentan la LPS; a continuación, se realiza una adopción de los conceptos; finalmente, se desarrollan o adoptan las técnicas, simbología y modelos para dar soporte a las fases de la Línea de Producto para Experimentación (LPE). La propuesta se valida mediante la evaluación de su: viabilidad, flexibilidad, usabilidad y satisfacción. La viabilidad y flexibilidad se evalúan mediante la instanciación del PGCE y de la LPE en experimentos concretos en IS. La usabilidad se evalúa mediante el uso de la propuesta para la generación de las instancias del PGCE y de LPE. La satisfacción evalúa la información sobre el experimento que contiene el PGCE y la LPE. Los resultados de la validación de la propuesta muestran mejores resultados en los aspectos de usabilidad y satisfacción a los experimentadores. ABSTRACT Empirical software engineering adapts the scientific method to software engineering (SE) in order to facilitate knowledge generation. Experimentation is one of the techniques used. For the knowledge generated experimentally to acquire the level of maturity necessary for later use, the experiments have to be replicated. As the same experiment is replicated more than once, there are numerous versions of all the products generated during a replication. These products are generally administered informally without control. This is troublesome when it comes to planning new replications or trying to gather information on replications conducted in the past. In order to grasp the size of the problem to be solved, this research examines the current state of the art of the management and use of experimental materials in replications, as well as the tools managing experimental materials. The study concludes that none of the analysed approaches provides a solution to the stated problem. The aim of this research is to improve the administration of SE experimental materials and experimental replications in support of experiment replication. To do this, we propose the adaptation of software configuration management (SCM) and software product line (SPL) paradigms to experimentation. The action research method was selected in order to develop this proposal. The first step in the adaptation of the SCM to experimentation was to analyse the experimental process from the viewpoint of the transformation of products. The concepts were then adapted based on software development and experimentation processes. Finally, a set of instruments were developed and added to an experiment configuration management plan (ECMP). The first step in the adaptation of the SPL to experimentation is to analyse the concepts, activities and phases underlying the SPL. The concepts are then adapted. Finally, techniques, symbols and models are developed or adapted in support of the experimentation product line (EPL) phases. The proposal is validated by evaluating its feasibility, flexibility, usability and satisfaction. Feasibility and flexibility are evaluated by instantiating the ECMP and the EPL in specific SE experiments. Usability is evaluated by using the proposal to generate the instances of the ECMP and EPL. The results of the validation of the proposal show that the proposal performs better with respect to usability issues and experimenter satisfaction.

Diseño de sistema de pitch pasivo para aerogeneradores en entornos urbanos

El presente proyecto desarrolla el diseño de un sistema de pitch pasivo para aerogeneradores en entornos urbanos en el marco del proyecto SWIP (Soluciones, componentes y herramientas novedosos e innovadores para la integración de la energía eólica en áreas urbanas y suburbanas) En primer lugar se describe el marco de trabajo así como una introducción teórica de energía eólica y de sistemas de pitch o de control de paso de pala. Aquí son presentados los fundamentos del accionamiento del pitch pasivo diseñado. A continuación se presenta el mecanismo diseñado y los cálculos sobre él efectuados para el ajuste de sus parámetros de funcionamiento. Posteriormente se plantea el análisis estructural de los distintos casos de carga a los que estará sometido y el estudio de su respuesta dinámica a perturbaciones reales con las que trabajará durante su funcionamiento normal. Por último, se aclaran otra serie de factores como la seguridad y el sobredimensionamiento del generador y se hace un análisis económico del diseño junto con una comparativa con las tecnologías alternativas existentes. ABSTRACT The present project develops the design of a passive pitch system for wind turbines for urban and sub-urban areas for the SWIP European Project (New innovative solutions, components and tools for the integration of wind energy in urban and peri-urban áreas) Firstly, the framework is described, as well as a theoretical introduction to wind energy and pitch systems. Here, the principles of the designed passive pitch mechanism are presented. Subsequently, the designed mechanism is presented together with the calculations on it for the adjustment of its working parameters. After that, the structural analyses for the different load cases that will affect the design are studied. Afterwards, the dynamic response of the system to real perturbations during its operation is studied. Finally, some concepts concerning security issues or oversizing of the electric generator are considered and an economic analysis is performed for the design and also to compare it with the alternative existing technologies.

Virtual 3D Support Contents Oriented to Interactive Self-Learning

In the educational project described in this paper, new virtual 3D didactical contents have been developed to achieve specific outcomes, within the frame of a new methodology oriented to objectives of the European Higher Education Area directives. The motivation of the project was to serve as a new assessment method, to create a link between new programs of study with the older ones. In this project, new rubrics have been developed to be employed as an objective method of evaluation of specific and transversal outcomes, to accomplish the certification criteria of institutions like ABET (Accreditation Board for Engineering and Technology).

Public Private Partnerships in the Humanitarian Aid

This master thesis is intended to perform an exploratory approach for the potential to Public-Private Partnerships as a tool for advanced collaboration between businesses and the cooperation system in the specific context of humanitarian action. It intends to conduct a case study analysis of representative interactions between the public and private actors in the humanitarian aid, and in conjunction with a profound revision of the existing literature, creates a set of conclusions and recommendations that can serve as a prototype for possible inclusion guide the private sector in humanitarian action through new paradigms that go beyond the classical donor-recipient model.

Plan de negocio: empresa de turismo activo

El presente documento tiene como objetivo general desarrollar un plan de negocio para analizar la viabilidad de la creación de una nueva empresa, “LA CABRA TIRA AL MONTE S.L.”, que estará ubicada en la localidad vallisoletana de Canalejas de Peñafiel y que pretende convertirse en una alternativa real para los visitantes dentro del actual contexto turístico de la comarca. ---ABSTRACT---The objective of this document is to provide a business plan to analyze the feasibility of creating a new company, "LA CABRA TIRA AL MONTE S.L.", that will be located in the town of Canalejas de Peñafiel in the province of Valladolid, the purpose of which is to provide an additional alternative for the tourists of the region.

On the role of global flow instability analysis in closed loop flow control

Control of linear flow instabilities has been demonstrated to be an effective theoretical flow control methodology, capable of modifying transitional flows on canonical geometries such as the plane channel and the flat-plate boundary layer. Extending the well-developed theoretical flow control techniques to flows over or through complex geometries requires addressing the issue of efficient capturing of the leading members of the global eigenspectrum pertinent to such flows. The present contribution describes state-of-the-art modal global instability analysis methodologies recently developed in our group, based on matrix formation and time-stepping, respectively. The relative performance of these algorithms is assessed on the recovery of BiGlobal and TriGlobal eigenspectra in the spanwise periodic and the cubic lid-driven cavity, respectively; the adjoint eigenspectrum in the latter flow is recovered for the first time. For three-dimensional flows without any homogeneous spatial direction, the time-stepping methodology was found to outperform the matrix-forming approach and permit recovering the leading TriGlobal eigenmodes in an three-dimensional open cavity of aspect ratio L : D : W = 5 : 1 : 1; theoretical flow control of this configuration is underway.

Capacity Building through education, research and collaboration: AFRICA BUILD, an eHealth Case Study

AFRICA BUILD (AB) is a Coordination Action project under the 7th European Framework Programme having the aim of improving the capacities for health research and education in Africa through Information and Communication Technologies (ICT). This project, started in 2012, has promoted health research, education and evidence-based practice in Africa through the creation of centers of excellence, by using ICT,?know-how?, eLearning and knowledge sharing, through Web-enabled virtual communities.

On the role of global flow instability analysis in closed loop flow control

Control of linear flow instabilities has been demonstrated to be an effective theoretical flow control methodology, capable of modifying transitional flow on canonical geometries such as the plane channel and the flat-plate boundary layer.