Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Clean Coal Technologies Scenario and Evaluation of Present CO2 Dwindling Initiatives to Approach Zero Emission Power Stations By Coal Combustion. Deployment Situation and Evaluation Study

In the present uncertain global context of reaching an equal social stability and steady thriving economy, power demand expected to grow and global electricity generation could nearly double from 2005 to 2030. Fossil fuels will remain a significant contribution on this energy mix up to 2050, with an expected part of around 70% of global and ca. 60% of European electricity generation. Coal will remain a key player. Hence, a direct effect on the considered CO2 emissions business-as-usual scenario is expected, forecasting three times the present CO2 concentration values up to 1,200ppm by the end of this century. Kyoto protocol was the first approach to take global responsibility onto CO2 emissions monitoring and cap targets by 2012 with reference to 1990. Some of principal CO2emitters did not ratify the reduction targets. Although USA and China spur are taking its own actions and parallel reduction measures. More efficient combustion processes comprising less fuel consuming, a significant contribution from the electricity generation sector to a CO2 dwindling concentration levels, might not be sufficient. Carbon Capture and Storage (CCS) technologies have started to gain more importance from the beginning of the decade, with research and funds coming out to drive its come in useful. After first researching projects and initial scale testing, three principal capture processes came out available today with first figures showing up to 90% CO2 removal by its standard applications in coal fired power stations. Regarding last part of CO2 reduction chain, two options could be considered worthy, reusing (EOR & EGR) and storage. The study evaluates the state of the CO2 capture technology development, availability and investment cost of the different technologies, with few operation cost analysis possible at the time. Main findings and the abatement potential for coal applications are presented. DOE, NETL, MIT, European universities and research institutions, key technology enterprises and utilities, and key technology suppliers are the main sources of this study. A vision of the technology deployment is presented.

Counting, scoring and classifying hunger to allocate resources targeted to solve the problem

A proper allocation of resources targeted to solve hunger is essential to optimize the efficacy of actions and maximize results. This requires an adequate measurement and formulation of the problem as, paraphrasing Einstein, the formulation of a problem is essential to reach a solution. Different measurement methods have been designed to count, score, classify and compare hunger at local level and to allow comparisons between different places. However, the alternative methods produce significantly reach different results. These discrepancies make decisions on the targeting of resource allocations difficult. To assist decision makers, a new method taking into account the dimension of hunger and the coping capacities of countries, is proposed enabling to establish both geographical and sectoral priorities for the allocation of resources.

Counting, scoring and classifying hunger to allocate resources targeted to solve the problem

A proper allocation of resources targeted to solve hunger is essential to optimize the efficacy of actions and maximize results. This requires an adequate measurement and formulation of the problem as, paraphrasing Einstein, the formulation of a problem is essential to reach a solution. Different measurement methods have been designed to count, score, classify and compare hunger at local level and to allow comparisons between different places. However, the alternative methods reach significantly different results. These discrepancies make decisions on the targeting of resource allocations difficult. To assist decision makers, a new method taking into account the dimension of hunger and the coping capacities of countries is proposed enabling to establish both geographical and sectoral priorities for the allocation of resources

Response threshold models, stochastic learning automata and ant colony optimization-based decentralized self-coordination algorithms for heterogeneous multi-tasks distribution in multi-robot systems

In recent decades, there has been an increasing interest in systems comprised of several autonomous mobile robots, and as a result, there has been a substantial amount of development in the eld of Articial Intelligence, especially in Robotics. There are several studies in the literature by some researchers from the scientic community that focus on the creation of intelligent machines and devices capable to imitate the functions and movements of living beings. Multi-Robot Systems (MRS) can often deal with tasks that are dicult, if not impossible, to be accomplished by a single robot. In the context of MRS, one of the main challenges is the need to control, coordinate and synchronize the operation of multiple robots to perform a specic task. This requires the development of new strategies and methods which allow us to obtain the desired system behavior in a formal and concise way. This PhD thesis aims to study the coordination of multi-robot systems, in particular, addresses the problem of the distribution of heterogeneous multi-tasks. The main interest in these systems is to understand how from simple rules inspired by the division of labor in social insects, a group of robots can perform tasks in an organized and coordinated way. We are mainly interested on truly distributed or decentralized solutions in which the robots themselves, autonomously and in an individual manner, select a particular task so that all tasks are optimally distributed. In general, to perform the multi-tasks distribution among a team of robots, they have to synchronize their actions and exchange information. Under this approach we can speak of multi-tasks selection instead of multi-tasks assignment, which means, that the agents or robots select the tasks instead of being assigned a task by a central controller. The key element in these algorithms is the estimation ix of the stimuli and the adaptive update of the thresholds. This means that each robot performs this estimate locally depending on the load or the number of pending tasks to be performed. In addition, it is very interesting the evaluation of the results in function in each approach, comparing the results obtained by the introducing noise in the number of pending loads, with the purpose of simulate the robot's error in estimating the real number of pending tasks. The main contribution of this thesis can be found in the approach based on self-organization and division of labor in social insects. An experimental scenario for the coordination problem among multiple robots, the robustness of the approaches and the generation of dynamic tasks have been presented and discussed. The particular issues studied are: Threshold models: It presents the experiments conducted to test the response threshold model with the objective to analyze the system performance index, for the problem of the distribution of heterogeneous multitasks in multi-robot systems; also has been introduced additive noise in the number of pending loads and has been generated dynamic tasks over time. Learning automata methods: It describes the experiments to test the learning automata-based probabilistic algorithms. The approach was tested to evaluate the system performance index with additive noise and with dynamic tasks generation for the same problem of the distribution of heterogeneous multi-tasks in multi-robot systems. Ant colony optimization: The goal of the experiments presented is to test the ant colony optimization-based deterministic algorithms, to achieve the distribution of heterogeneous multi-tasks in multi-robot systems. In the experiments performed, the system performance index is evaluated by introducing additive noise and dynamic tasks generation over time.

Discrete Multi-Criteria Methods for lands use and conservation planning on La Colacha in Arroyos Menores (Río Cuarto, Province of Córdoba, Argentina)

The study area is La Colacha sub-basins from Arroyos Menores basins, natural areas at West and South of Río Cuarto in Province of Córdoba of Argentina, fertile with loess soils and monsoon temperate climate, but with soil erosions including regressive gullies that degrade them progressively. Cultivated gently since some hundred sixty years, coordinated action planning became necessary to conserve lands while keeping good agro-production. The authors had improved data on soils and on hydrology for the study area, evaluated systems of soil uses and actions to be recommended and applied Decision Support Systems (DSS) tools for that, and were conducted to use discrete multi-criteria models (MCDM) for the more global views about soil conservation and hydraulic management actions and about main types of use of soils. For that they used weighted PROMETHEE, ELECTRE, and AHP methods with a system of criteria grouped as environmental, economic and social, and criteria from their data on effects of criteria. The alternatives resulting offer indication for planning depending somehow on sub basins and on selections of weights, but actions for conservation of soils and water management measures are recommended to conserve the basins conditions, actually sensibly degrading, mainly keeping actual uses of the lands.

Evaluación del rendimiento de jugadores y equipos de fútbol de nivel de élite en diferentes contextos situacionales = Evaluation on Match Performances of Professional Football Players and Teams under Different Situational Conditions = 不同情境条件下高水平足球运动员和运动队的比赛表现分析

El análisis del rendimiento en deportes juega un papel esencial en el fútbol profesional. Aunque el estudio del análisis del juego en fútbol se ha utilizado desde diferentes ámbitos y situaciones, todavía existen diferentes aspectos y componentes del juego que siguen sin estar estudiados. En este sentido existen diferentes aspectos que deben de superar los estudios previos centrados en el componente descriptivo tales como el uso de variables/ indicadores de rendimiento que no se han definido ni estudiado, la validez de los métodos observaciones que no han sido testados con los softwares específicos en fútbol, la aplicación y utilidad de los resultados, así como las limitaciones del estudio de las variables situacionales/contextuales. Con el objetivo de cubrir las citadas limitaciones se han diseñado 6 estudios independientes e inter-relacionados que tratan de estudiar los aspectos anteriormente referidos. El primer estudio evalua la fiabilidad inter-observadores de las estadísticas de juego de la empresa privada OPTA Sportsdata, estos datos son la muestra de estudio de la presente tesis doctoral. Dos grupos de observadores experimentados se requieren para analizar un partido de la liga española de manera independiente. Los resultados muestran que los eventos de equipos y porteros codificados por los inter-operadores alcanzan un acuerdo muy bueno (valores kappa entre 0.86 y 0.94). La validez inter-observadores de las acciones de juego y los datos de jugadores individuales se evaluó con elevados niveles de acuerdo (valores del coeficiente de correlación intraclase entre 0.88 hasta 1.00, el error típico estandarizado variaba entre 0.00 hasta 0.37). Los resultados sugieren que las estadísticas de juego registradas por los operadores de la empresa OPTA Sportsdata están bien entrenados y son fiables. El segundo, tercer y cuarto estudio se centran en resaltar la aplicabilidad del análisis de rendimiento en el fútbol así como para explicar en profundidad las influencias de las variables situacionales. Utilizando la técnica de los perfiles de rendimiento de jugadores y equipos de fútbol se puede evaluar y comparar de manera gráfica, fácil y visual. Así mismo, mediante esta técnica se puede controlar el efecto de las variables situacionales (localización del partido, nivel del equipo y del oponente, y el resultado final del partido). Los perfiles de rendimiento de porteros (n = 46 porteros, 744 observaciones) y jugadores de campo (n = 409 jugadores, 5288 observaciones) de la primera division professional de fútbol Española (La Liga, temporada 2012-13), los equipos (n = 496 partidos, 992 observaciones) de la UEFA Champions League (temporadas 2009-10 a 2012-13) fueron analizados registrando la media, desviación típica, mediana, cuartiles superior e inferior y el recuento de valores de cada indicador de rendimiento y evento, los cuales se presentaron en su forma tipificada y normalizada. Los valores medios de los porteros de los equipos de diferentes niveles de La Liga y de los equipos de diferente nivel de la UEFA Champions League cuando jugaban en diferentes contextos de juego y situaciones (variables situacionales) fueron comparados utilizando el ANOVA de un factor y la prueba t para muestras independientes (localización del partido, diferencias entre casa y fuera), y fueron establecidos en los perfiles de red después de unificar todos los registros en la misma escala derivada con valores estandarizados. Mientras que las diferencias de rendimiento entre los jugadores de los mejores equipos (Top3) y los peores (Bottom3) fueron comparados mediante el uso de diferencias en la magnitud del tamaño del efecto. El quinto y el sexto estudio analizaban el rendimiento del fútbol desde un punto de vista de predicción del rendimiento. El modelo linear general y el modelo lineal general mixto fue empleado para analizar la magnitud de las relaciones de los indicadores y estadísticas de juego con el resultado final del partido en función del tipo de partido (partidos ajustados o todos los partidos) en la fase de grupos de la Copa del Mundo 2014 de Brasil (n = 48 partidos, 38 partidos ajustados) y La Liga 2012-13 (n = 320 partidos ajustados). Las relaciones fueron evaluadas mediante las inferencias en la magnitud de las diferencias y se expresaron como partidos extra ganados o perdidos por cada 10 partidos mediante la variable calculada en 2 desviaciones típicas. Los resultados mostraron que, para los 48 partidos de la fase de grupos de la Copa del Mundo 2014, nueve variables tuvieron un efecto positive en la probabilidad de ganar (tiros, tiros a puerta, tiros de contraataque, tiros dentro del área, posesión de balón, pases en corto, media de secuencia de pases, duelos aéreos y entradas), cuatro tuvieron efectos negativos (tiros bloqueados, centros, regates y tarjetas amarillas), y otras 12 variables tenían efectos triviales o poco claros. Mientras que los 38 partidos ajustados, el efecto de duelos aéreos y tarjetas amarillas fueron triviales y claramente negativos respectivamente. En la La Liga, existió un efecto moderado positive para cada equipo para los tiros a puerta (3.4 victorias extras por cada 10 partidos; 99% IC ±1.0), y un efecto positivo reducido para tiros totales (1.7 victorias extrsa; ±1.0). Los efectos de la mayoría de los eventos se han relacionado con la posesión del balón, la cual obtuvo efectos negativos entre equipos (1.2 derrotas extras; ±1.0) pero un efecto positivo pequeño entra equipos (1.7 victorias extras; ±1.4). La localización del partido mostró un efecto positive reducido dentro de los equipos (1.9 victorias extras; ±0.9). Los resultados obtenidos en los perfiles y el modelado del rendimiento permiten ofrecer una información detallada y avanzada para el entrenamiento, la preparación previa a los partidos, el control de la competición y el análisis post-partido, así como la evaluación e identificación del talento de los jugadores. ABSTRACT Match performance analysis plays an important role in the modern professional football. Although the research in football match analysis is well-developed, there are still some issues and problems remaining in this field, which mainly include the lack of operational definitions of variables, reliability issues, applicability of the findings, the lack of contextual/situational variables, and focusing too much on descriptive and comparative analysis. In order to address these issues, six independent but related studies were conducted in the current thesis. The first study evaluated the inter-operator reliability of football match statistics from OPTA Sportsdata Company which is the data resourse of the thesis. Two groups of experienced operators were required to analyse a Spanish league match independently in the experiment. Results showed that team events and goalkeeper actions coded by independent operators reached a very good agreement (kappa values between 0.86 and 0.94). The inter-operator reliability of match actions and events of individual outfield players was also tested to be at a high level (intra-class correlation coefficients ranged from 0.88 to 1.00, standardised typical error varied from 0.00 to 0.37). These results suggest that the football match statistics collected by well-trained operators from OPTA Sportsdata Company are reliable. The second, third and fourth study aims to enhance the applicability of football match performance analysis and to explore deeply the influences of situational variables. By using a profiling technique, technical and tactical performances of football players and teams can be interpreted, evaluated and compared more easily and straightforwardly, meanwhile, influences and effects from situational variables (match location, strength of team and opposition, and match outcome) on the performances can be properly incorporated. Performance profiles of goalkeepers (n = 46 goalkeepers, 744 full match observations) and outfield players (n = 409 players, 5288 full match observations) from the Spanish First Division Professional Football League (La Liga, season 2012-13), teams (n = 496 matches, 992 observations) from UEFA Champions League (seasons 2009-10 to 2012-13) were set up by presenting the mean, standard deviation, median, lower and upper quartiles of the count values of each performance-related match action and event to represent their typical performances and spreads. Means of goalkeeper from different levels of team in La Liga and teams of different strength in UEFA Champions League when playing under different situational conditions were compared by using one-way ANOVA and independent sample t test (for match location, home and away differences), and were plotted into the same radar charts after unifying all the event counts by standardised score. While differences between the performances of outfield players from Top3 and from Bottom3 teams were compared by magnitude-based inferences. The fifth and sixth study aims to move from the descriptive and comparative football match analysis to a more predictive one. Generalised linear modelling and generalised mixed linear modelling were undertaken to quantify relationships of the performance-related match events, actions and variables with the match outcome in different types of games (close games and all games) in the group stage of 2014 Brazil FIFA World Cup (n = 48 games, 38 close games) and La Liga 2012-13 (n = 320 close games). Relationships were evaluated with magnitude-based inferences and were expressed as extra matches won or lost per 10 matches for an increase of two standard deviations of a variable. Results showed that, for all the 48 games in the group stage of 2014 FIFA World Cup, nine variables had clearly positive effects on the probability of winning (shot, shot on target, shot from counter attack, shot from inside area, ball possession, short pass, average pass streak, aerial advantage, and tackle), four had clearly negative effects (shot blocked, cross, dribble and red card), other 12 variabless had either trivial or unclear effects. While for the 38 close games, the effects of aerial advantage and yellow card turned to trivial and clearly negative, respectively. In the La Liga, there was a moderate positive within-team effect from shots on target (3.4 extra wins per 10 matches; 99% confidence limits ±1.0), and a small positive within-team effect from total shots (1.7 extra wins; ±1.0). Effects of most other match events were related to ball possession, which had a small negative within-team effect (1.2 extra losses; ±1.0) but a small positive between-team effect (1.7 extra wins; ±1.4). Game location showed a small positive within-team effect (1.9 extra wins; ±0.9). Results from the established performance profiles and modelling can provide detailed and straightforward information for training, pre-match preparations, in-match tactical approaches and post-match evaluations, as well as for player identification and development. 摘要 比赛表现分析在现代足球中起着举足轻重的作用。尽管如今对足球比赛表现分析的研究已经相对完善，但仍有很多不足之处。这些不足主要体现在：研究中缺乏对研究变量的清晰定义、数据信效度缺失、研究结果的实用性受限、比赛情境因素缺失以及过于集中在描述性和对比性分析等。针对这些问题，本论文通过六个独立而又相互联系的研究，进一步对足球比赛表现分析进行完善。 第一个研究对本论文的数据源--OPTA Sportsdata公司的足球比赛数据的信效度进行了实验检验。实验中，两组数据收集人员被要求对同一场西班牙足球甲级联赛的比赛进行分析。研究结果显示，两组收集人员记录下的球队比赛事件和守门员比赛行为具有高度的一致性(卡帕系数介于0.86和0.94)。收集人员输出的外场球员的比赛行为和比赛事件也具有很高的组间一致性(ICC相关系数介于0.88和1.00，标准化典型误差介于0.00和0.37)。实验结果证明了OPTA Sportsdata公司收集的足球比赛数据具有足够高的信效度。 第二、三、四个研究旨在提升足球比赛表现分析研究结果的实用性以及深度探讨比赛情境因素对足球比赛表现的影响。通过对足球运动员和运动队的比赛技战术表现进行档案创建，可以对运动员和运动队的比赛表现进行简直接而直观的呈现、评价和对比，同时，情境变量(比赛场地、球队和对手实力、比赛结果)对比赛表现的影响也可以被整合到表现档案中。本部分对2012-13赛季西班牙足球甲级联赛的参赛守门员(n = 46球员人次，744比赛场次)和外场球员(n = 409球员人次, 5288比赛场次)以及2009-10至2012-13赛季欧洲足球冠军联赛的参赛球队(n = 496比赛场次)的比赛技战术表现进行了档案创建。在表现档案中，各项比赛技战术指标的均值、标准差、中位数和大小四分位数被用来展现守门员、外场球员和球队的普遍表现和表现浮动性。方差分析(ANOVA)被用来对西甲不同水平球队的守门员、欧冠中不同水平球队在不同比赛情境下的普遍表现(各项指标的均值)进行对比，独立样本t检验被用来对比主客场比赛普遍表现的差异。数据量级推断(magnitude-based inferences)的方法则被用来对西甲前三名和最后三名球队外场球员的普遍表现进行对比分析。所有来自不同水平球队的运动员和不同水平运动队的各项比赛指标皆被转换成了标准分数，从而能把他们在各种不同比赛情境下的普遍表现(各项比赛指标的均值)投到相同的雷达图中进行直观的对比。 第五和第六个研究目的在于进行预测性足球比赛表现分析，从而跨越之前固有的描述性和对比性分析。广义线性模型和广义混合线性模型被用来对2014年巴西世界杯小组赛(n = 48 比赛场次，38小分差场次)和2012-13赛季西甲联赛(n = 320小分差场次)的比赛中各表现相关比赛事件、行为和变量与比赛结果(胜、平、负)的关系进行建模。模型中的关系通过数据量级推断(magnitude-based inferences)的方法来界定，具体表现为某个变量增加两个标准差对比赛结果的影响(每10场比赛中额外取胜或失利的场数)。研究结果显示，在2014年巴西世界杯小组赛的所有48场比赛中，9个变量(射门、射正、反击中射门、禁区内射门、控球、短传、连续传球平均次数、高空球争抢成功率和抢断)与赢球概率有清晰的正相关关系，4个变量(射门被封堵、传中、过人和红牌)与赢球概率有清晰的负相关关系，其他12个被分析的变量与赢球概率的相关关系微小或不清晰。而在38场小分差比赛中，高空球争抢成功率由正相关变为微小关系，黄牌则由微小关系变为清晰的负相关。在西甲联赛中，每一支球队增加两个标准差的“射正球门”可以给每10场比赛带来3.4场额外胜利(99%置信区间±1.0场)，而所有球队作为一个整体，每增加两个标准差的“射正球门”可以给每10场比赛带来1.7场额外胜利(99%置信区间±1.0场)。其他大多数比赛相关事件与比赛结果的相关关系与“控球”相关联。每一支球队增加两个标准差的“控球”将会给每10场比赛带来1.2场额外失利(99%置信区间±1.0场)，而所有球队作为一个整体，每增加两个标准差的“控球”可以给每10场比赛带来1.7场额外胜利(99%置信区间±1.4场)。与客场比赛相对，主场能给球队带来1.9 /10场额外胜利(99%置信区间±0.9场)。 比赛表现档案和模型中得出的研究结果可以为俱乐部、足球队、教练组、表现分析师和运动员提供详细而直接的参考信息。这些信息可用于训练指导、赛前备战、赛中技战术调整和赛后技战术表现分析，也可运用于足球运动员选材、培养和发展。

Proposal of a trust and reputation model to provide recommendation in open quality oriented environments

El auge y penetración de las nuevas tecnologías junto con la llamada Web Social están cambiando la forma en la que accedemos a la medicina. Cada vez más pacientes y profesionales de la medicina están creando y consumiendo recursos digitales de contenido clínico a través de Internet, surgiendo el problema de cómo asegurar la fiabilidad de estos recursos. Además, un nuevo concepto está apareciendo, el de pervasive healthcare o sanidad ubicua, motivado por pacientes que demandan un acceso a los servicios sanitarios en todo momento y en todo lugar. Este nuevo escenario lleva aparejado un problema de confianza en los proveedores de servicios sanitarios. Las plataformas de eLearning se están erigiendo como paradigma de esta nueva Medicina 2.0 ya que proveen un servicio abierto a la vez que controlado/supervisado a recursos digitales, y facilitan las interacciones y consultas entre usuarios, suponiendo una buena aproximación para esta sanidad ubicua. En estos entornos los problemas de fiabilidad y confianza pueden ser solventados mediante la implementación de mecanismos de recomendación de recursos y personas de manera confiable. Tradicionalmente las plataformas de eLearning ya cuentan con mecanismos de recomendación, si bien están más enfocados a la recomendación de recursos. Para la recomendación de usuarios es necesario acudir a mecanismos más elaborados como son los sistemas de confianza y reputación (trust and reputation) En ambos casos, tanto la recomendación de recursos como el cálculo de la reputación de los usuarios se realiza teniendo en cuenta criterios principalmente subjetivos como son las opiniones de los usuarios. En esta tesis doctoral proponemos un nuevo modelo de confianza y reputación que combina evaluaciones automáticas de los recursos digitales en una plataforma de eLearning, con las opiniones vertidas por los usuarios como resultado de las interacciones con otros usuarios o después de consumir un recurso. El enfoque seguido presenta la novedad de la combinación de una parte objetiva con otra subjetiva, persiguiendo mitigar el efecto de posibles castigos subjetivos por parte de usuarios malintencionados, a la vez que enriquecer las evaluaciones objetivas con información adicional acerca de la capacidad pedagógica del recurso o de la persona. El resultado son recomendaciones siempre adaptadas a los requisitos de los usuarios, y de la máxima calidad tanto técnica como educativa. Esta nueva aproximación requiere una nueva herramienta para su validación in-silico, al no existir ninguna aplicación que permita la simulación de plataformas de eLearning con mecanismos de recomendación de recursos y personas, donde además los recursos sean evaluados objetivamente. Este trabajo de investigación propone pues una nueva herramienta, basada en el paradigma de programación orientada a agentes inteligentes para el modelado de comportamientos complejos de usuarios en plataformas de eLearning. Además, la herramienta permite también la simulación del funcionamiento de este tipo de entornos dedicados al intercambio de conocimiento. La evaluación del trabajo propuesto en este documento de tesis se ha realizado de manera iterativa a lo largo de diferentes escenarios en los que se ha situado al sistema frente a una amplia gama de comportamientos de usuarios. Se ha comparado el rendimiento del modelo de confianza y reputación propuesto frente a dos modos de recomendación tradicionales: a) utilizando sólo las opiniones subjetivas de los usuarios para el cálculo de la reputación y por extensión la recomendación; y b) teniendo en cuenta sólo la calidad objetiva del recurso sin hacer ningún cálculo de reputación. Los resultados obtenidos nos permiten afirmar que el modelo desarrollado mejora la recomendación ofrecida por las aproximaciones tradicionales, mostrando una mayor flexibilidad y capacidad de adaptación a diferentes situaciones. Además, el modelo propuesto es capaz de asegurar la recomendación de nuevos usuarios entrando al sistema frente a la nula recomendación para estos usuarios presentada por el modo de recomendación predominante en otras plataformas que basan la recomendación sólo en las opiniones de otros usuarios. Por último, el paradigma de agentes inteligentes ha probado su valía a la hora de modelar plataformas virtuales complejas orientadas al intercambio de conocimiento, especialmente a la hora de modelar y simular el comportamiento de los usuarios de estos entornos. La herramienta de simulación desarrollada ha permitido la evaluación del modelo de confianza y reputación propuesto en esta tesis en una amplia gama de situaciones diferentes. ABSTRACT Internet is changing everything, and this revolution is especially present in traditionally offline spaces such as medicine. In recent years health consumers and health service providers are actively creating and consuming Web contents stimulated by the emergence of the Social Web. Reliability stands out as the main concern when accessing the overwhelming amount of information available online. Along with this new way of accessing the medicine, new concepts like ubiquitous or pervasive healthcare are appearing. Trustworthiness assessment is gaining relevance: open health provisioning systems require mechanisms that help evaluating individuals’ reputation in pursuit of introducing safety to these open and dynamic environments. Technical Enhanced Learning (TEL) -commonly known as eLearning- platforms arise as a paradigm of this Medicine 2.0. They provide an open while controlled/supervised access to resources generated and shared by users, enhancing what it is being called informal learning. TEL systems also facilitate direct interactions amongst users for consultation, resulting in a good approach to ubiquitous healthcare. The aforementioned reliability and trustworthiness problems can be faced by the implementation of mechanisms for the trusted recommendation of both resources and healthcare services providers. Traditionally, eLearning platforms already integrate recommendation mechanisms, although this recommendations are basically focused on providing an ordered classifications of resources. For users’ recommendation, the implementation of trust and reputation systems appears as the best solution. Nevertheless, both approaches base the recommendation on the information from the subjective opinions of other users of the platform regarding the resources or the users. In this PhD work a novel approach is presented for the recommendation of both resources and users within open environments focused on knowledge exchange, as it is the case of TEL systems for ubiquitous healthcare. The proposed solution adds the objective evaluation of the resources to the traditional subjective personal opinions to estimate the reputation of the resources and of the users of the system. This combined measure, along with the reliability of that calculation, is used to provide trusted recommendations. The integration of opinions and evaluations, subjective and objective, allows the model to defend itself against misbehaviours. Furthermore, it also allows ‘colouring’ cold evaluation values by providing additional quality information such as the educational capacities of a digital resource in an eLearning system. As a result, the recommendations are always adapted to user requirements, and of the maximum technical and educational quality. To our knowledge, the combination of objective assessments and subjective opinions to provide recommendation has not been considered before in the literature. Therefore, for the evaluation of the trust and reputation model defined in this PhD thesis, a new simulation tool will be developed following the agent-oriented programming paradigm. The multi-agent approach allows an easy modelling of independent and proactive behaviours for the simulation of users of the system, conforming a faithful resemblance of real users of TEL platforms. For the evaluation of the proposed work, an iterative approach have been followed, testing the performance of the trust and reputation model while providing recommendation in a varied range of scenarios. A comparison with two traditional recommendation mechanisms was performed: a) using only users’ past opinions about a resource and/or other users; and b) not using any reputation assessment and providing the recommendation considering directly the objective quality of the resources. The results show that the developed model improves traditional approaches at providing recommendations in Technology Enhanced Learning (TEL) platforms, presenting a higher adaptability to different situations, whereas traditional approaches only have good results under favourable conditions. Furthermore the promotion period mechanism implemented successfully helps new users in the system to be recommended for direct interactions as well as the resources created by them. On the contrary OnlyOpinions fails completely and new users are never recommended, while traditional approaches only work partially. Finally, the agent-oriented programming (AOP) paradigm has proven its validity at modelling users’ behaviours in TEL platforms. Intelligent software agents’ characteristics matched the main requirements of the simulation tool. The proactivity, sociability and adaptability of the developed agents allowed reproducing real users’ actions and attitudes through the diverse situations defined in the evaluation framework. The result were independent users, accessing to different resources and communicating amongst them to fulfil their needs, basing these interactions on the recommendations provided by the reputation engine.

Computational and Experimental Modelling of Mooring Lines Dynamics for Offshore Floating Wind Turbines

El cálculo de cargas de aerogeneradores flotantes requiere herramientas de simulación en el dominio del tiempo que consideren todos los fenómenos que afectan al sistema, como la aerodinámica, la dinámica estructural, la hidrodinámica, las estrategias de control y la dinámica de las líneas de fondeo. Todos estos efectos están acoplados entre sí y se influyen mutuamente. Las herramientas integradas se utilizan para calcular las cargas extremas y de fatiga que son empleadas para dimensionar estructuralmente los diferentes componentes del aerogenerador. Por esta razón, un cálculo preciso de las cargas influye de manera importante en la optimización de los componentes y en el coste final del aerogenerador flotante. En particular, el sistema de fondeo tiene gran impacto en la dinámica global del sistema. Muchos códigos integrados para la simulación de aerogeneradores flotantes utilizan modelos simplificados que no consideran los efectos dinámicos de las líneas de fondeo. Una simulación precisa de las líneas de fondeo dentro de los modelos integrados puede resultar fundamental para obtener resultados fiables de la dinámica del sistema y de los niveles de cargas en los diferentes componentes. Sin embargo, el impacto que incluir la dinámica de los fondeos tiene en la simulación integrada y en las cargas todavía no ha sido cuantificada rigurosamente. El objetivo principal de esta investigación es el desarrollo de un modelo dinámico para la simulación de líneas de fondeo con precisión, validarlo con medidas en un tanque de ensayos e integrarlo en un código de simulación para aerogeneradores flotantes. Finalmente, esta herramienta, experimentalmente validada, es utilizada para cuantificar el impacto que un modelos dinámicos de líneas de fondeo tienen en la computación de las cargas de fatiga y extremas de aerogeneradores flotantes en comparación con un modelo cuasi-estático. Esta es una información muy útil para los futuros diseñadores a la hora de decidir qué modelo de líneas de fondeo es el adecuado, dependiendo del tipo de plataforma y de los resultados esperados. El código dinámico de líneas de fondeo desarrollado en esta investigación se basa en el método de los Elementos Finitos, utilizando en concreto un modelo ”Lumped Mass” para aumentar su eficiencia de computación. Los experimentos realizados para la validación del código se realizaron en el tanque del École Céntrale de Nantes (ECN), en Francia, y consistieron en sumergir una cadena con uno de sus extremos anclados en el fondo del tanque y excitar el extremo suspendido con movimientos armónicos de diferentes periodos. El código demostró su capacidad para predecir la tensión y los movimientos en diferentes posiciones a lo largo de la longitud de la línea con gran precisión. Los resultados indicaron la importancia de capturar la dinámica de las líneas de fondeo para la predicción de la tensión especialmente en movimientos de alta frecuencia. Finalmente, el código se utilizó en una exhaustiva evaluación del efecto que la dinámica de las líneas de fondeo tiene sobre las cargas extremas y de fatiga de diferentes conceptos de aerogeneradores flotantes. Las cargas se calcularon para tres tipologías de aerogenerador flotante (semisumergible, ”spar-buoy” y ”tension leg platform”) y se compararon con las cargas obtenidas utilizando un modelo cuasi-estático de líneas de fondeo. Se lanzaron y postprocesaron más de 20.000 casos de carga definidos por la norma IEC 61400-3 siguiendo todos los requerimientos que una entidad certificadora requeriría a un diseñador industrial de aerogeneradores flotantes. Los resultados mostraron que el impacto de la dinámica de las líneas de fondeo, tanto en las cargas de fatiga como en las extremas, se incrementa conforme se consideran elementos situados más cerca de la plataforma: las cargas en la pala y en el eje sólo son ligeramente modificadas por la dinámica de las líneas, las cargas en la base de la torre pueden cambiar significativamente dependiendo del tipo de plataforma y, finalmente, la tensión en las líneas de fondeo depende fuertemente de la dinámica de las líneas, tanto en fatiga como en extremas, en todos los conceptos de plataforma que se han evaluado. ABSTRACT The load calculation of floating offshore wind turbine requires time-domain simulation tools taking into account all the phenomena that affect the system such as aerodynamics, structural dynamics, hydrodynamics, control actions and the mooring lines dynamics. These effects present couplings and are mutually influenced. The results provided by integrated simulation tools are used to compute the fatigue and ultimate loads needed for the structural design of the different components of the wind turbine. For this reason, their accuracy has an important influence on the optimization of the components and the final cost of the floating wind turbine. In particular, the mooring system greatly affects the global dynamics of the floater. Many integrated codes for the simulation of floating wind turbines use simplified approaches that do not consider the mooring line dynamics. An accurate simulation of the mooring system within the integrated codes can be fundamental to obtain reliable results of the system dynamics and the loads. The impact of taking into account the mooring line dynamics in the integrated simulation still has not been thoroughly quantified. The main objective of this research consists on the development of an accurate dynamic model for the simulation of mooring lines, validate it against wave tank tests and then integrate it in a simulation code for floating wind turbines. This experimentally validated tool is finally used to quantify the impact that dynamic mooring models have on the computation of fatigue and ultimate loads of floating wind turbines in comparison with quasi-static tools. This information will be very useful for future designers to decide which mooring model is adequate depending on the platform type and the expected results. The dynamic mooring lines code developed in this research is based in the Finite Element Method and is oriented to the achievement of a computationally efficient code, selecting a Lumped Mass approach. The experimental tests performed for the validation of the code were carried out at the `Ecole Centrale de Nantes (ECN) wave tank in France, consisting of a chain submerged into a water basin, anchored at the bottom of the basin, where the suspension point of the chain was excited with harmonic motions of different periods. The code showed its ability to predict the tension and the motions at several positions along the length of the line with high accuracy. The results demonstrated the importance of capturing the evolution of the mooring dynamics for the prediction of the line tension, especially for the high frequency motions. Finally, the code was used for an extensive assessment of the effect of mooring dynamics on the computation of fatigue and ultimate loads for different floating wind turbines. The loads were computed for three platforms topologies (semisubmersible, spar-buoy and tension leg platform) and compared with the loads provided using a quasi-static mooring model. More than 20,000 load cases were launched and postprocessed following the IEC 61400-3 guideline and fulfilling the conditions that a certification entity would require to an offshore wind turbine designer. The results showed that the impact of mooring dynamics in both fatigue and ultimate loads increases as elements located closer to the platform are evaluated; the blade and the shaft loads are only slightly modified by the mooring dynamics in all the platform designs, the tower base loads can be significantly affected depending on the platform concept and the mooring lines tension strongly depends on the lines dynamics both in fatigue and extreme loads in all the platform concepts evaluated.