Acoustic properties of microperforated panels and their optimizatión by simulated annealing

This thesis investigates the acoustic properties of microperforated panels as an alternative to passive noise control. The first chapters are devoted to the review of analytical models to obtain the acoustic impedance and absorption coefficient of perforated panels. The use of panels perforated with circular holes or with slits is discussed. The theoretical models are presented and some modifications are proposed to improve the modeling of the physical phenomena occurring at the perforations of the panels. The absorption band is widened through the use of multiple layer microperforated panels and/or the combination of a millimetric panel with a porous layer that can be a fibrous material or a nylon mesh. A commercial micrometric mesh downstream a millimetric panel is proposed as a very efficient and low cost solution for controlling noise in reduced spaces. The simulated annealing algorithm is used in order to optimize the panel construction to provide a maximum of absorption in a determined wide band frequency range. Experiments are carried out at normal sound incidence and plane waves. One example is shown for a double layer microperforated panel subjected to grazing flow. A good agreement is achieved between the theory and the experiments. RESUMEN En esta tesis se investigan las propiedades acústicas de paneles micro perforados como una alternativa al control pasivo del ruido. Los primeros capítulos están dedicados a la revisión de los modelos de análisis para obtener la impedancia acústica y el coeficiente de absorción de los paneles perforados. El uso de paneles perforados con agujeros circulares o con ranuras es discutido. Se presentan diferentes modelos y se proponen algunas modificaciones para mejorar la modelización de los fenómenos físicos que ocurren en las perforaciones. La banda de absorción se ensancha a través del uso de capas múltiples de paneles micro perforados y/o la combinación de un panel de perforaciones milimétricas combinado con una capa porosa que puede ser un material fibroso o una malla de nylon. Se propone el uso de una malla micrométrica detrás de un panel milimétrico como una solución económica y eficiente para el control del ruido en espacios reducidos. El algoritmo de recocido simulado se utiliza con el fin de optimizar la construcción de paneles micro perforados para proporcionar un máximo de absorción en una banda determinada frecuencias. Los experimentos se llevan a cabo en la incidencia normal de sonido y ondas planas. Se muestra un ejemplo de panel micro perforado de doble capa sometido a flujo rasante. Se consigue un buen acuerdo entre la teoría y los experimentos.

Influence of proportion and particle size gradation of rubber from end-of-life tires on mechanical, thermal and acoustic properties of plaster-rubber mortars

This work presents the main experimental results obtained from the study of plaster test pieces and boards with addition of various volumetric rubber fractions from mechanical grinding of end-of-life tires (ELTs), in three different particle size gradations. It includes a description of the materials employed, and their proportions. The physical and mechanical properties, as well as the thermal conductivity and acoustic insulation properties are analyzed. Experimental results obtained for specimens with addition of recycled rubber are compared with similar ones, carried out on specimens of plaster of identical features without any addition, evaluating the influence of the particle size and mixture proportions. An improvement in thermal and acoustic performance has been obtained as well as a reduction in density, and as a result, some constructive applications for paving and slabs in rehabilitation works are proposed.

Characterization of Amorphous Tantalum Oxide for Insulating Acoustic Mirrors

This work describes the assessment of the acoustic properties of sputtered tantalum oxide films intended as high impedance films for the acoustic isolation of bulk acoustic wave devices operating in the GHz frequency range. The films are grown by sputtering a metallic tantalum target under different oxygen and argon gas mixtures, total pressures, pulsed DC powers and substrate bias. The structural properties of the films are assessed through infrared absorption spectroscopy and X-ray diffraction measurements. Their acoustic impedance is obtained after estimating the mass density by X-ray reflectometry measurements and the longitudinal acoustic velocity by analyzing the longitudinal λ/2 resonance induced in a tantalum oxide film inserted between an acoustic reflector and an AlN-based resonator. A second measurement of the sound velocity is achieved through picosecond acoustic spectroscopy.

High-Acoustic-Impedance Tantalum Oxide Layers for Insulating Acoustic Reflectors

This work describes the assessment of the acoustic properties of sputtered tantalum oxide films intended for use as high-impedance films of acoustic reflectors for solidly mounted resonators operating in the gigahertz frequency range. The films are grown by sputtering a metallic tantalum target under different oxygen and argon gas mixtures, total pressures, pulsed dc powers, and substrate biases. The structural properties of the films are assessed through infrared absorption spectroscopy and X-ray diffraction measurements. Their acoustic impedance is assessed by deriving the mass density from X-ray reflectometry measurements and the acoustic velocity from picosecond acoustic spectroscopy and the analysis of the frequency response of the test resonators.

Influence of Crystal Quality on the Excitation and Propagation of Surface and Bulk Acoustic Waves in Polycrystalline AlN Films

We investigate the excitation and propagation of acoustic waves in polycrystalline aluminum nitride films along the directions parallel and normal to the c-axis. Longitudinal and transverse propagations are assessed through the frequency response of surface acoustic wave and bulk acoustic wave devices fabricated on films of different crystal qualities. The crystalline properties significantly affect the electromechanical coupling factors and acoustic properties of the piezoelectric layers. The presence of misoriented grains produces an overall decrease of the piezoelectric activity, degrading more severely the excitation and propagation of waves traveling transversally to the c-axis. It is suggested that the presence of such crystalline defects in c-axis-oriented films reduces the mechanical coherence between grains and hinders the transverse deformation of the film when the electric field is applied parallel to the surface.

Simulation, construction and characterization of a piezoelectric transducer using rexolite as acoustic matching

This article describes the simulation and characterization of an ultrasonic transducer using a new material called Rexolite to be used as a matching element. This transducer was simulated using a commercial piezoelectric ceramic PIC255 at 8 MHz. Rexolite, the new material, presents an excellent acoustic matching, specially in terms of the acoustic impedance of water. Finite elements simulations were used in this work. Rexolite was considered as a suitable material in the construction of the transducer due to its malleability and acoustic properties, to validate the simulations a prototype transducer was constructed. Experimental measurements were used to determine the resonance frequency of the prototype transducer. Simulated and experimental results were very similar showing that Rexolite may be an excellent matching, particularly for medical applications.

Absorción acústica a incidencia normal de espumas de aluminio

En este artículo se presentan los primeros resultados de absorción acústica a incidencia normal de espumas de aluminio fabricadas mediante una técnica pulvimetalúrgica. El interés de estas espumas radica en que en ellas se combinan interesantes propiedades acústicas y mecánicas. Se estudian espumas de aluminio de distinta morfología superficial conseguida variando el tipo de precursor y usando materiales de relleno durante el proceso de espumación. Se muestra un estudio comparativo de las espumas fabricadas mediante esta técnica con las espumas comerciales ALPORAS. Las espumas de menor densidad presentan una absorción acústica comparable a la de las comerciales ALPORAS. ABSTRACT. In this paper, the first experimental data of acoustic absorption at normal incidence in aluminum foams generated by a metallurgic technique are presented. The interest of this kind of structures is due to the combination of mechanical and acoustic properties. By changing the precursor type or using filling materials during the foaming process, we have obtained aluminum foams with different surface morphologies. A comparative study between foams fabricated using this technique and ALPORAS commercial aluminum foams is shown. The foams which present the lower density show an acoustic absorption comparable to the ALPORAS commercial ones.

El sistema de grabación y reproducción sonora ambiofónico

Este proyecto fin de carrera trata del sistema de grabación y reproducción sonora ambiofónico, destacar que este sistema y la tecnología que emplea es de dominio público. La ambiofonía se basa en un amalgama de investigaciones recientes y de los ya bien sabidos principios psicoacústicos y binaurales. Estos avances han expandido nuevas fronteras en lo concerniente a la grabación y reproducción de audio, así como de presentar al oyente un campo sonoro a la entrada de sus oídos lo más parecido posible al campo sonoro al que se expondría al oyente en el momento y lugar de la toma de sonido, es decir, reconstruye un campo sonora binaural. Este sistema ha podido desarrollarse, de una manera bastante satisfactoria, gracias a todos los estudios y textos anteriores en materia de psicoacústica y del mecanismo de escucha humano. Otro factor gracias al cual es posible y asequible, tanto el desarrollo como el disfrute de esta tecnología, es el hecho que en nuestros días es muy económico disponer de ordenadores lo suficientemente potentes y rápidos para realizar el procesado de señales que se requiere de una manera bastante rápida. Los desarrolladores de dicha tecnología han publicado diversos documentos y archivos descargables de la red con aplicaciones para la implementación de sistemas ambiofónicos de manera gratuita para uso privado. El sistema ambiofónico se basa en la combinación de factores psicoacústicos ignorados o subestimados y lo ya sabido sobre las propiedades acústicas de salas, tanto de salas en las que tienen lugar las ejecuciones musicales (auditorios, teatros, salas de conciertos...), como de salas de escucha (salones de domicilios, controles de estudios...). En la parte práctica del proyecto se van a realizar una serie de grabaciones musicales empleando tanto técnicas estereofónicas tradicionales como ambiofónicas de grabación con el fin de describir y comparar ambas técnicas microfónicas. También servirá para estudiar hasta que punto es favorable subjetivamente para el oyente el hecho de realizar la toma de sonido teniendo en cuenta las propiedades del sistema de reproducción ambiofónico. Esta comparación nos dará una idea de hasta donde se puede llegar, en cuanto a sensación de realidad para el oyente, al tener en cuenta durante el proceso de grabación efectos como la respuesta del pabellón auditivo del oyente, la cual es única, y que posteriormente la diafonía interaural va a ser cancelada mediante un procesado digital de señal. ABSTRACT. This final project is about the ambiophonic recording and playback system, note that this system and the technology it uses is of public domain. Ambiophonics is based on an amalgam of recent research and to the well known and binaural psychoacoustic principles. These advances have expanded new frontiers with regard to the audio recording and playback, as well as to present the listener a sound field at the entrance of their ears as close as possible to the sound field that would the listener be exposed to at the time and place of the mucial interpretation, so we can say that ambiophonics reconstructs a binaural sound field . This system has been developed, in a fairly satisfactory way, thanks to all the studies and previous texts on psychoacoustics and human listening mechanism. Another factor by which it is possible and affordable, both the development and the enjoyment of this technology, is the fact that in our days is inexpensive to usres to own computers that are powerful and fast enough to perform the signal processing that is required in a short time. The developers of this technology have published several documents and downloadable files on the network with applications for ambiophonics system implementation for free. Ambiophonics is based on a combination of factors ignored or underestimated psychoacousticly and what is already known about the acoustic properties of rooms, including rooms where musical performances take place (auditoriums, theaters, concert halls...), and listening rooms (concet halls, studios controls...). In the practical part of the project will be making a series of musical recordings using both traditional stereo recording techniques and recording techiniques compatible with ambiophonics in order to describe and compare both recording techniques. It will also examine to what extent is subjectively favorable for the listener the fact of considering the playback system properties of ambiophonics during the recording stage. This comparison will give us an idea of how far can we get, in terms of sense of reality to the listener, keeping in mind during the recording process the effects introduced by the response of the ear of the listener, which is unique, and that the subsequently interaural crosstalk will be canceled by a digital signal processing.

Acústica de las iglesias jesuíticas como parte del patrimonio integral en Córdoba y San Ignacio Miní

En esta investigación se aborda el tema del comportamiento acústico de las Iglesias Jesuíticas de la ciudad de Córdoba (Argentina) y San Ignacio Mini ubicada en la localidad de San Ignacio, provincia de Misiones (Argentina), construidas hace dos siglos atrás y declaradas Patrimonio de la Humanidad, con el objetivo de evaluar los parámetros que determinan la comprensión de la palabra y la aptitud de cada una de las iglesias para el canto y la música religiosa. En una primera etapa la investigación se orientó a profundizar en las características constructivas interiores de cada templo y a proponer una metodología de análisis para comparar los resultados de las mediciones objetivas, realizadas mediante la implementación de mediciones in situ, con los resultados de las apreciaciones subjetivas resultantes de la elaboración de encuestas, a los fines de caracterizar acústicamente cada espacio sonoro. Se seleccionaron, para la caracterización objetiva de cada templo, aquellos parámetros que permiten sintetizar las propiedades acústicas relacionadas con la música y la palabra, y aquellos que posibilitan medir la proporción efectiva de las primeras reflexiones, consideradas como índices subjetivos de la capacidad de distinción del sonido por parte del oyente. Se comparan los valores alcanzados con las preferencias subjetivas obtenidas en las encuestas de opinión. Se relevaron tiempos de reverberación altos en todas iglesias, fuera de los considerados óptimos para cada recinto. Se analizaron los índices de calidad y se comprobó cómo influyen los diferentes materiales en el comportamiento acústico de cada recinto. Para la evaluación subjetiva se implementó una encuesta ya validada en la que se privilegió la fácil asociación entre parámetros acústicos y psicoacústicos, esto posibilitó encontrar aquellos parámetros objetivos, simulados con público, que estuviesen fuertemente relacionados con el juicio subjetivo, así como aquellos con menor correlación. La búsqueda y relevamiento de material grafico, fotográfico y otros documentos históricos posibilitó la reconstrucción de cada iglesia para su modelización y la evaluación del comportamiento de todos los templos con la presencia de feligreses, no habiéndose podido realizar mediciones bajo esta condición. El interés por obtener datos acústicos más precisos de la Iglesia San Ignacio Mini, que actualmente se encuentra en ruinas, llevó a utilizar herramientas más poderosas de cálculo como el método de las fuentes de imagen “Ray Tracing Impact” por medio del cual se logró la auralización. Para ello se trabajó con un archivo de audio que representó la voz masculina de un sacerdote en el idioma jesuítico-guaraní, recuperando así el patrimonio cultural intangible. ABSTRACT This research addresses the acoustic behavior of the Jesuit Churches in Cordoba City (Argentina) and San Ignacio Mini (located in the town of San Ignacio, Misiones, Argentina), built two centuries ago and declared World Heritage Sites, with the objective to evaluate the parameters that determine the speech comprehension and the ability of each of the churches for singing of religious music. The first step of the work was aimed to further investigate the internal structural characteristics of each temple and to propose an analysis methodology to compare the objective results of in situ measurements with the subjective results of surveys, in order to characterize acoustically each sound-space. For the subjective characterization of each temple, those parameters that allow synthesizing the acoustic properties related to music & speech and measuring the subjective indices for the recognition of sounds, were selected. Also, the values were compared with the ones obtained from the surveys. High reverberation times were found in all churches, which is not considered optimal for the enclosed areas of the temples. The quality indices were analyzed and it was found how the different materials influence in the acoustic behavior of each enclosure. For subjective evaluation, a survey was implemented (that was previously validated) where the association between acoustic and psychoacoustic parameters was privileged; this allowed to find those objective parameters who were strongly related to the subjective ones, as well as those with lower correlation. Photographic and graphic material and other historical documents allowed the reconstruction of each church for its modeling, and also the evaluation of the performance of all the temples in the presence of their congregation. The interest in obtaining more accurate acoustic data of the San Ignacio Mini Church, which is now in ruins, led to the use of most powerful methods, as for example the image-sources "Ray Tracing Impact" method. For this, an audio archive was used, representing a male voice of a priest in the Jesuit-Guaraní language; recovering in this way intangible cultural heritage.

Determinación de las características acústicas de materiales de construcción de Ecuador - Ladrillo artesanal e industrial

En el presente trabajo se plantea el estudio de las características acústicas del ladrillo artesanal e industrial fabricado en Ecuador, considerando las características particulares respecto a la calidad de la materia prima, además del hecho de que a nivel artesanal su producción no está regularizada, si bien existen una serie de reglamentos no siempre son acatados por el productor artesanal, lo que hace que presente propiedades particulares. La idea principal de este trabajo es generar datos referenciales e iniciales, sobre las propiedades acústicas del ladrillo artesanal e industrial ya que en Ecuador, no existe ningún estudio de esta naturaleza sobre el tema. Además de crear los mecanismos necesarios para una posible ampliación del estudio a otros materiales propios de Ecuador que permitan generar una base de datos sobre sus propiedades acústicas. Otro aspecto importante sobre esta investigación es el familiarizarse con el uso de técnicas de medición, manejo de equipamiento y software diverso, del manejo y comparación de normativa. ABSTRACT. The purpose of this paper is the study of the acoustic characteristics of artisanal and industrial brick manufactured in Ecuador, considering the particular characteristics regarding the quality of raw materials, besides the fact that artisanal production level is unregulated, although there are a number of regulations are not always complied with by the artisan producer, which makes this particular properties. The main idea of this paper is to generate reference and baseline data on the acoustic properties of artisanal and industrial brick as in Ecuador, there is no study of this nature on the subject. In addition to creating the necessary mechanisms for a possible extension of the study to other materials from Ecuador that will generate a database on its acoustic properties. Another important aspect of this research is to get familiar with the use of measurement techniques, equipment and miscellaneous management software, management and comparison of legislation.

In situ acoustic methods to estimate the physical and mechanical aging of oriented strand board

Following the success achieved in previous research projects usin non-destructive methods to estimate the physical and mechanical aging of particle and fibre boards, this paper studies the relationships between aging, physical and mechanical changes, using non-destructive measurements of oriented strand board (OSB). 184 pieces of OSB board from a French source were tested to analyze its actual physical and mechanical properties. The same properties were estimated using acoustic non-destructive methods (ultrasound and stress wave velocity) during a physical laboratory aging test. Measurements were recorded of propagation wave velocity with the sensors aligned, edge to edge, and forming an angle of 45 degrees, with both sensors on the same face of the board. This is because aligned measures are not possible on site. The velocity results are always higher in 45 degree measurements. Given the results of statistical analysis, it can be concluded that there is a strong relationship between acoustic measurements and the decline in physical and mechanical properties of the panels due to aging. The authors propose several models to estimate the physical and mechanical properties of board, as well as their degree of aging. The best results are obtained using ultrasound, although the difference in comparison with the stress wave method is not very significant. A reliable prediction of the degree of deterioration (aging) of board is presented.

Transient acoustic response in car cabins with localization of reflections

Due to its small size and the restrictions on source and listener positions, the design of sound reproduction systems for car cabins is particularly cumbersome. In the present project the measurement of the impulse response between a single loudspeaker and a listener position, with special emphasis on the directional characteristics, will be examined. The propagation paths inside a car are very short, meaning that it is very difficult for the existing commercial measurement systems to resolve the different reflections arriving to the listener. This paper propose a first approach of an algorithm based on time difference of arrival along a measurement technique aiming at finding the reflections and their direction of arrival to the listener. To this end a circular microphone array at a known position is employed, along with Maximum-Length Sequences (MLS) measurement technique. The results are processed so as to extract the directional properties, demonstrate the physical limitations that can influence or prevent this detection in practice. Measurements were carried out in a free-field environment (anechoic chamber) making use of different panels closer around the microphone array. RESUMEN. El diseño de sistemas de reproducción de audio para cabinas de coche es especialmente complicado debido al reducido tamaño del espacio y las restricciones de los altavoces y posiciones de escucha de los ocupantes. En el presente proyecto, se examinan mediciones de la respuesta al impulso entre un altavoz y una posición de escucha con especial énfasis en las características direccionales. Los caminos de propagación de las ondas sonoras dentro de un coche son muy cortos, lo que hace difícil para los instrumentos de medida existentes en el mercado determinar las direcciones de llegada de las diferentes reflexiones que llegan a una posición de escucha. Este trabajo propone una primera aproximación de un algoritmo, basado en las diferencias temporales de llegada de una onda a diferentes puntos de medida, y una particular técnica de medida de la respuesta al impulso para obtener las direcciones de llegada de reflexiones a una posición de escucha. Para ello, se emplea una matriz circular de micrófonos en una posición conocida junto con la técnica de medida MLS (Maximum Length Sequence). Los resultados obtenidos son procesados para extraer la dirección de llegada de las reflexiones acústicas y encontrar las limitaciones que influyan en la detección de dichas reflexiones. Las mediciones se llevan a cabo en un entorno de campo libre y utilizando diferentes superficies reflectantes alrededor de la matriz de micrófonos.

Low-Intensity Pulsed Ultrasound Improves the Functional Properties of Cardiac Mesoangioblasts

Cell-based therapy is a promising approach for many diseases, including ischemic heart disease. Cardiac mesoangioblasts are committed vessel-associated progenitors that can restore to a significant, although partial, extent, heart structure and function in a murine model of myocardial infarction. Low-intensity pulsed ultrasound (LIPUS) is a noninvasive form of mechanical energy that can be delivered into biological tissues as acoustic pressure waves, and is widely used for clinical applications including bone fracture healing. We hypothesized that the positive effects of LIPUS on bone and soft tissue, such as increased cell differentiation and cytoskeleton reorganization, could be applied to increase the therapeutic potential of mesoangioblasts for heart repair. In this work, we show that LIPUS stimulation of cardiac mesoangioblasts isolated from mouse and human heart results in significant cellular modifications that provide beneficial effects to the cells, including increased malleability and improved motility. Additionally, LIPUS stimulation increased the number of binucleated cells and induced cardiac differentiation to an extent comparable with 5´-azacytidine treatment. Mechanistically, LIPUS stimulation activated the BMP-Smad signalling pathway and increased the expression of myosin light chain-2 together with upregulation of β1 integrin and RhoA, highlighting a potentially important role for cytoskeleton reorganization. Taken together, these results provide functional evidence that LIPUS might be a useful tool to explore in the field of heart cell therapy