Control by ATR-FTIR of surface treatment of cork stoppers and its effect on their mechanical performance

Fourier transform infrared (FTIR) spectroscopy was applied to determine the type of surface treatment and dose used on cork stoppers and to predict the friction between stopper and bottleneck. Agglomerated cork stoppers were finished with two different doses and using two surface treatments: P (paraffin and silicone), 15 and 25 mg/stopper, and S (only silicone), 10 and 15 mg/stopper. FTIR spectra were recorded at five points for each stopper by attenuated total reflectance (ATR). Absorbances at 1,010, 2,916, and 2,963 cm -1 were obtained in each spectrum. Discriminant analysis techniques allowed the treatment, and dose applied to each stopper to be identified from the absorbance values. 91.2% success rates were obtained from individual values and 96.0% from the mean values of each stopper. Spectrometric data also allowed treatment homogeneity to be determined on the stopper surface, and a multiple regression model was used to predict the friction index (If = Fe/Fc) (R 2 = 0.93)

Planificación en fútbol según el modelo ATR en comparación con los modelos tradicionales

El presente trabajo busca el desarrollo de una planificación en fútbol comparando los diferentes modelos de planificación. Se basa en la contraposición entre los modelos tradicionales y los contemporáneos, siendo el modelo ATR el más adecuado para la planificación de una temporada de fútbol. El trabajo se desarrolla desde un marco teórico englobando las diferentes características y fases en el desarrollo de una planificación así como los pasos a seguir para su correcto desarrollo incluyendo la técnica de marketing actualmente más utilizada, la técnica DAFO, y un diseño de plan de ejecución adecuado.

Modelado y Mitigación de Fenómenos de Multitrayecto en Imágenes Radar mediante Técnicas basadas en Inversión Temporal

Las técnicas SAR (Synthetic Aperture Radar, radar de apertura sintética) e ISAR (Inverse SAR, SAR inverso) son sistemas radar coherentes de alta resolución, capaces de proporcionar un mapa de la sección radar del blanco en el dominio espacial de distancia y acimut. El objetivo de ambas técnicas radica en conseguir una resolución acimutal más fina generando una apertura sintética a partir del movimiento relativo entre radar y blanco. Los radares imagen complementan la labor de los sistemas ópticos e infrarrojos convencionales, especialmente en condiciones meteorológicas adversas. Los sistemas SAR e ISAR convencionales se diseñan para iluminar blancos en situaciones de línea de vista entre sensor y blanco. Por este motivo, presentan un menor rendimiento en escenarios complejos, como por ejemplo en bosques o entornos urbanos, donde los retornos multitrayecto se superponen a los ecos directos procedentes de los blancos. Se conocen como "imágenes fantasma", puesto que enmascaran a los verdaderos blancos y dan lugar a una calidad visual pobre, complicando en gran medida la detección del blanco. El problema de la mitigación del multitrayecto en imágenes radar adquiere una relevancia teórica y práctica. En esta Tesis Doctoral, se hace uso del concepto de inversión temporal (Time Reversal, TR) para mejorar la calidad visual de las imágenes SAR e ISAR eliminando las "imágenes fantasma" originadas por la propagación multitrayecto (algoritmos TR-SAR y TR-ISAR, respectivamente). No obstante, previamente a la aplicación de estas innovadoras técnicas de mitigación del multi-trayecto, es necesario resolver el problema geométrico asociado al multitrayecto. Centrando la atención en la mejora de las prestaciones de TR-ISAR, se implementan una serie de técnicas de procesado de señal avanzadas antes y después de la etapa basada en inversión temporal (el eje central de esta Tesis). Las primeras (técnicas de pre-procesado) están relacionadas con el multilook averaging, las transformadas tiempo-frecuencia y la transformada de Radon, mientras que las segundas (técnicas de post-procesado) se componen de un conjunto de algoritmos de superresolución. En pocas palabras, todas ellas pueden verse como un valor añadido al concepto de TR, en lugar de ser consideradas como técnicas independientes. En resumen, la utilización del algoritmo diseñado basado en inversión temporal, junto con algunas de las técnicas de procesado de señal propuestas, no deben obviarse si se desean obtener imágenes ISAR de gran calidad en escenarios con mucho multitrayecto. De hecho, las imágenes resultantes pueden ser útiles para posteriores esquemas de reconocimiento automático de blancos (Automatic Target Recognition, ATR). Como prueba de concepto, se hace uso tanto de datos simulados como experimentales obtenidos a partir de radares de alta resolución con el fin de verificar los métodos propuestos.

Designing Rapid Transit Network Design with Alternative routes

The aim of this paper is to propose a model for the design of a robust rapid transit network. In this paper, a network is said to be robust when the effect of disruption on total trip coverage is minimized. The proposed model is constrained by three different kinds of flow conditions. These constraints will yield a network that provides several alternative routes for given origin–destination pairs, therefore increasing robustness. The paper includes computational experiments which show how the introduction of robustness influences network design

Airport Taxi Planning: Lagrangian Decomposition

The airport taxi planning (TP) module is a decision tool intended to guide airport surface management operations. TP is defined by a flow network optimization model that represents flight ground movements and improves aircraft taxiing routes and schedules during periods of aircraft congestion. TP is not intended to operate as a stand‐alone tool for airport operations management: on the contrary, it must be used in conjunction with existing departing and arriving traffic tools and overseen by the taxi planner of the airport, also known as the aircraft ground controller. TP must be flexible in order to accommodate changing inputs while maintaining consistent routes and schedules already delivered from past executions. Within this dynamic environment, the execution time of TP may not exceed a few minutes. Classic methods for solving binary multi‐commodity flow networks with side constraints are not efficient enough; therefore, a Lagrangian decomposition methodology has been adapted to solve it. We demonstrate TP Lagrangian decomposition using actual data from the Madrid‐Barajas Airport

Unconformity-bounded stratigraphic units (UBSUs) in an italian alluvial-plain area: recognizing and dating

We studied the coastal zone of the Tavoliere di Puglia plain, (Puglia region, southern Italy) with the aim to recognize the main unconformities, and therefore, the unconformity-bounded stratigraphic units (UBSUs; Salvador 1987, 1994) forming its Quaternary sedimentary fill. Recognizing unconformities is particularly problematic in an alluvial plain, due to the difficulties in distinguishing the unconformities that bound the UBSUs. So far, the recognition of UBSUs in buried successions has been made mostly by using seismic profiles. Instead, in our case, the unavailability of the latter has prompted us to address the problem by developing a methodological protocol consisting of the following steps: I) geological survey in the field; II) draft of a preliminary geological setting based on the field-survey results; III) dating of 102 samples coming from a large number of boreholes and some outcropping sections by means of the amino acid racemization (AAR) method applied to ostracod shells and 14C dating, filtering of the ages and the selection of valid ages; IV) correction of the preliminary geological setting in the light of the numerical ages; definition of the final geological setting with UBSUs; identification of a ‘‘hypothetical’’ or ‘‘attributed time range’’ (HTR or ATR) for each UBSU, the former very wide and subject to a subsequent modification, the latter definitive; V) cross-checking between the numerical ages and/or other characteristics of the sedimentary bodies and/or the sea-level curves (with their effects on the sedimentary processes) in order to restrict also the hypothetical time ranges in the attributed time ranges. The successful application of AAR geochronology to ostracod shells relies on the fact that the ability of ostracods to colonize almost all environments constitutes a tool for correlation, and also allow the inclusion in the same unit of coeval sediments that differ lithologically and paleoenvironmentally. The treatment of the numerical ages obtained using the AAR method required special attention. The first filtering step was made by the laboratory (rejection criteria a and b). Then, the second filtering step was made by testing in the field the remaining ages. Among these, in fact, we never compared an age with a single preceding and/or following age; instead, we identified homogeneous groups of numerical ages consistent with their reciprocal stratigraphic position. This operation led to the rejection of further numerical ages that deviate erratically from a larger, homogeneous age population which fits well with its stratigraphic position (rejection criterion c). After all of the filtering steps, the valid ages that remained were used for the subdivision of the sedimentary sequences into UBSUs together with the lithological and paleoenvironmental criteria. The numerical ages allowed us, in the first instance, to recognize all of the age gaps between two consecutive samples. Next, we identified the level, in the sedimentary thickness that is between these two samples, that may represent the most suitable UBSU boundary based on its lithology and/or the paleoenvironment. The recognized units are: I) Coppa Nevigata sands (NEA), HTR: MIS 20–14, ATR: MIS 17–16; II) Argille subappennine (ASP), HTR: MIS 15–11, ATR: MIS 15–13; III) Coppa Nevigata synthem (NVI), HTR: MIS 13–8, ATR: MIS 12–11; IV) Sabbie di Torre Quarto (STQ), HTR: MIS 13–9.1, ATR: MIS 11; V) Amendola subsynthem (MLM1), HTR: MIS 12–10, ATR: MIS 11; VI) Undifferentiated continental unit (UCI), HTR: MIS 11–6.2, ATR: MIS 9.3–7.1; VII) Foggia synthem (TGF), ATR: MIS 6; VIII) Masseria Finamondo synthem (TPF), ATR: Upper Pleistocene; IX) Carapelle and Cervaro streams synthem (RPL), subdivided into: IXa) Incoronata subsynthem (RPL1), HTR: MIS 6–3; ATR: MIS 5–3; IXb) Marane La Pidocchiosa–Castello subsynthem (RPL3), ATR: Holocene; X) Masseria Inacquata synthem (NAQ), ATR: Holocene. The possibility of recognizing and dating Quaternary units in an alluvial plain to the scale of a marine isotope stage constitutes a clear step forward compared with similar studies regarding other alluvial-plain areas, where Quaternary units were dated almost exclusively using their stratigraphic position. As a result, they were generically associated with a geological sub-epoch. Instead, our method allowed a higher detail in the timing of the sedimentary processes: for example, MIS 11 and MIS 5.5 deposits have been recognized and characterized for the first time in the study area, highlighting their importance as phases of sedimentation.

A model for urban commuting in a multicenter city

A model for simulating and calculating cost consequences due to urban commuting in a multicenter city is presented in this paper. The model is applied to two alternative city master plans for a Swedish city, Västerås. Illustrative results are reported.