Phytoextraction of heavy metals from mine soils using hyperaccumulator plants.

Phytoextraction is an environmental-friendly and cost-effective technology that uses metal hyperaccumulator plants to remove heavy metals from soils. The metals are absorbed by the roots, transported and accumulated in the aerial parts of the plants, which can be harvested and eliminated. The aim of this work was to study some hyperaccumulator species that could be useful to decontaminate mine soils and also to investigate the bioavailability and uptake of these metals by plants with the addition of organic amendments. Pot experiments were performed with soil samples collected from two mining areas in the north of Madrid, where there was an intense mining activity more than 50 years ago. Three species (Thlaspi arvense, Brassica juncea and Atriplex halimus) were grown under controlled conditions in pots filled with contaminated soils mixed with 0 Mg, 30 Mg and 60 Mg per hectare of two different organic amendments: a commercial compost made of pine bark, peat and wood fiber and other made of horse and sheep manure and wood fiber. Plants were harvested at the end of their crop cycle and were digested in order to measure metal concentration (Zn, Cu and Cd) in roots and shoots. Highest plant metal concentration was observed in pots treated with pine bark amendment and with pure soil due to an increase in metal bioavailability with decreasing pH. Also in those treatments the total plant biomass was lower, even some plants could not germinate. On the contrary, there was a lower metal concentration in plant tissues of pots with manure because its higher pH whereas plant growth was significantly larger so there was an incresing amount of metals removed from soil by plants. Comparing the three species results indicate a higher total metal uptake in A. halimus than B. juncea and T. arvense. In conclusion, results show that pH affects metal bioavailability and uptake by hyperaccumulator plants. Addition of organic amendments could be a successful technique for stabilization of metals in contaminated soils.

The Threads of Biosystems Engineering

The core concepts, or threads, of Biosystems Engineering (BSEN) are variously understood by those within the discipline, but have never been unequivocally defined due to its early stage of development. This makes communication and teaching difficult compared to other well established engineering subjects. Biosystems Engineering is a field of Engineering which int egrates engineering science and design with applied biological, environmental and agricultural sciences. It represents an evolution of the Agricultural Engineering discipline applied to all living organisms not including biomedical applications. The basic key element for the emerging EU Biosystems Engineering program of studies is to ensure that it offers essential minimum fundamental engine ering knowledge and competences . A core curriculum developed by Erasmus Thematic Networks is used as benchmark for Agr icultural and Biosystems Engineering studies in Europe. The common basis of the core curriculum for the discipline across the Atlantic , including a minimum of competences comprising the Biosystems Engineering core competencies, has been defined by an Atlan tis project , but this needs to be taken further by defining the threads linking courses together. This paper presents a structured approach to define the Threads of BSEN . The definition of the mid-level competences and the associated learning outcomes has been one of the objectives of the Atlantis programme TABE.NET. The mid-level competences and learning outcomes for each of six specializations of BSEN are defined while the domain-specific knowledge to be acquired for each outcome is proposed. Once the proposed definitions are adopted, these threads will be available for global development of the BSEN.

Phytoextraction of heavy metals from mine soils using hyperaccumulator plants

The aim of this work was to study some hyperaccumulator species that could be useful to decontaminate mine soils and also to investigate the bioavailability and uptake of these metals by plants with the addition of organic amendments. Pot experiments were performed with soil samples collected from two mining areas in the north of Madrid, where there was an intense mining activity more than 50 years ago. Three species (Thlaspi arvense, Brassica juncea and Atriplex halimus) were grown under controlled conditions in pots filled with contaminated soils mixed with 0 Mg, 30 Mg and 60 Mg per hectare of two different organic amendments: a commercial compost made of pine bark, peat and wood fiber and other made of horse and sheep manure and wood fiber. Plants were harvested at the end of their crop cycle and were digested in order to measure metal concentration (Zn, Cu and Cd) in roots and shoots. Highest plant metal concentration was observed in pots treated with pine bark amendment and with pure soil due to an increase in metal bioavailability with decreasing pH. Also in those treatments the total plant biomass was lower, even some plants could not germinate. On the contrary, there was a lower metal concentration in plant tissues of pots with manure because its higher pH whereas plant growth was significantly larger so there was an incresing amount of metals removed from soil by plants. Comparing the three species results indicate a higher total metal uptake in A. halimus than B. juncea and T. arvense. In conclusion, results show that pH affects metal bioavailability and uptake by hyperaccumulator plants. Addition of organic amendments could be a successful technique for stabilization of metals in contaminated soils.

A comparative analysis of ABE Bachelor of Science programs in European and US Universities.

European Universities are involved in series of great changes regarding teaching and education organization during the last few years. The origin of these changes is the creation of the so-called European Higher Education Area (EHEA), which main target is to harmonize the different University studies throughout Europe. As a consequence, most of the programs of studies in all degrees are suffering changes in order to converge to common structures. Taking advantage of the actual process, some European universities are moving from traditional Agricultural Engineering programs to a more wide discipline named recently as Biosystems Engineering, which is a science- based engineering discipline that integrates engineering science and design with applied biological, environmental and agricultural sciences, broadening in this way the area of application of Engineering sciences not strictly to agricultural sciences, but to the biologic al sciences in general, including the agricultural sciences. This paper presents a comparative study of different Bachelor of Science degrees offered by American and European Universities in the field of Agricultural/Biosystems Engineering. To carry out the analysis 40 programs accredited by ABET in American Universities and 50 European programs. Among other questions, the total number of credits, the number of semesters, the kind of modules and the distribution of subjects in groups (Basic Sciences, Engineering Fundamentals, Agricultural/Biological Sciences, Humanities & Economic Sciences, Applied Agricultural/Biological Engineering and electives) are discussed in the paper. The information provided can be an useful starting point in future definitions of new or renewed degrees with the aim of advancing in internationalization of the programs and helping student’s mobility.

Documentación en Arqueología. Aplicaciones del Núcleo Español de Metadatos

RESUMEN Las aplicaciones de los Sistemas de Información Geográfica (SIG) a la Arqueología, u otra disciplina humanística no son una novedad. La evolución de los mismos hacia sistemas distribuidos e interoperables, y estructuras donde las políticas de uso, compartido y coordinado de los datos sí lo son, estando todos estos aspectos contemplados en la Infraestructura de Datos Espaciales. INSPIRE es el máximo exponente europeo en cuestiones de iniciativa y marco legal en estos aspectos. La metodología arqueológica recopila y genera gran cantidad de datos, y entre los atributos o características intrínsecas están la posición y el tiempo, aspectos que tradicionalmente explotan los SIG. Los datos se catalogan, organizan, mantienen, comparten y publican, y los potenciales consumidores comienzan a tenerlos disponibles. Toda esta información almacenada de forma tradicional en fichas y posteriormente en bases de datos relacionadas alfanuméricas pueden ser considerados «metadatos» en muchos casos por contener información útil para más usuarios en los procesos de descubrimiento, y explotación de los datos. Además estos datos también suelen ir acompañados de información sobre ellos mismos, que describe su especificaciones, calidad, etc. Cotidianamente usamos los metadatos: ficha bibliográfica del libro o especificaciones de un ordenador. Pudiéndose definir como: «información descriptiva sobre el contexto, calidad, condición y características de un recurso, dato u objeto que tiene la finalidad de facilitar su recuperación, identificación,evaluación, preservación y/o interoperabilidad». En España existe una iniciativa para estandarizar la descripción de los metadatos de los conjuntos de datos geoespaciales: Núcleo Español de Metadatos (NEM), los mismos contienen elementos para la descripción de las particularidades de los datos geográficos, que incluye todos los registros obligatorios de la Norma ISO19115 y del estudio de metadatos Dublin Core, tradicionalmente usado en contextos de Biblioteconomía. Conscientes de la necesidad de los metadatos, para optimizar la búsqueda y recuperación de los datos, se pretende formalizar la documentación de los datos arqueológicos a partir de la utilización del NEM, consiguiendo así la interoperabilidad de la información arqueológica. SUMMARY The application of Geographical Information Systems (GIS) to Archaeology and other social sciences is not new. Their evolution towards inter-operating, distributed systems, and structures in which policies for shared and coordinated data use are, and all these aspects are included in the Spatial Data Infrastructure (SDI). INSPIRE is the main European exponent in matters related to initiative and legal frame. Archaeological methodology gathers and creates a great amount of data, and position and time, aspects traditionally exploited by GIS, are among the attributes or intrinsic characteristics. Data are catalogued, organised, maintained, shared and published, and potential consumers begin to have them at their disposal. All this information, traditionally stored as cards and later in relational alphanumeric databases may be considered «metadata» in many cases, as they contain information that is useful for more users in the processes of discovery and exploitation of data. Moreover, this data are often accompanied by information about themselves, describing its especifications, quality, etc. We use metadata very often: in a book’s bibliographical card, or in the description of the characteristics of a computer. They may be defined as «descriptive information regarding the context, quality, condition and characteristics of a resource, data or object with the purpose of facilitating is recuperation, identification, evaluation, preservation and / interoperability.» There is an initiative in Spain to standardise the description of metadata in sets of geo-spatial data: the Núcleo Español de Metadatos (Spanish Metadata Nucleus), which contains elements for the description of the particular characteristics of geographical data, includes all the obligatory registers from the ISO Norm 19115 and from the metadata study Dublin Core, traditionally used in library management. Being aware of the need of metadata, to optimise the search and retrieval of data, the objective is to formalise the documentation of archaeological data from the Núcleo Español de Metadatos (Spanish Metadata Nucleus), thus obtaining the interoperability of the archaeological information.

Evaluación de competencias en programas de formación en el sector rural : el caso de la maestría tecnológica para prestadores de servicios profesionales (PSP) en México

El objetivo de la presente investigación doctoral es proponer una metodología para evaluar las competencias en programas de formación en el sector rural mexicano. Para ello hemos realizado una exhausta revisión documental a nivel internacional sobre el concepto de competencia, sus orígenes y su evolución, para poder diseñar la metodología de su evaluación, así como el identificar los diferentes enfoques, herramientas y técnicas utilizadas actualmente para la evaluación de las competencias. Una vez comprendido el concepto de competencia, haber observado que existen saberes implícitos en ella, además de haber identificado las competencias necesarias por parte de los actores sociales presentes en el medio rural mexicano para el logro de un desarrollo rural integral dentro de sus territorios, y haberlos integrado en el diseño de la metodología, hemos realizado una propuesta metodológica considerando los instrumentos disponibles en México y enmarcados en la normativa legal vigente, que pudieran aportar evidencias de desempeño de un sujeto. Además como parte de la metodología se ha diseñado y validado un cuestionario psicométrico para poder evaluar las competencias personales de los sujetos presentes en el medio rural mexicano. La aplicación empírica de la metodología propuesta fue realizada a un estudio de caso en México, particularmente a Prestadores de Servicios Profesionales (PSP) del medio rural, estudiantes de una maestría tecnológica diseñada bajo un enfoque de competencias por el Colegio de Postgraduados, Institución de enseñanza, investigación y servicio en Ciencias Agrícolas. Los resultados evidencian que la propuesta metodológica es significativa para poder evaluar las competencias en el sector rural mexicano. Abstract The objective of this PhD thesis is to propose a methodology to assess competences in training programs in rural Mexico. We therefore performed an exhausted international literature review on the concept of competence, its origins and evolution, in order to design their evaluation methodology and also identified the different approaches, tools and techniques currently used for the assessment of competences. Once we understand the concept of competence, have noticed that there are implicit knowledge in it, and having identified the competences needed by social actors in rural Mexico, for the achievement of a integrated rural development within their territories, and integrated them into the design of the methodology, we have made a methodology considering the tools available in Mexico and framed in the current legislation, which could provide evidence of performance of a subject. Also as part of the methodology we designed and validated a psychometric questionnaire to assess behavioral competences of the individuals present in rural Mexico. The empirical application of the proposed methodology was performed at a case study in Mexico, particularly to providers of farming professionals services (PSP), students from a technological master designed under a competence approach by the Colegio de Postgraduados, an Institution of teaching, research and service in Agricultural Sciences. The results show that the proposed methodology is meaningful to assess competences in rural Mexico.