Generic competences in engineering field: a comparative study between Latin America and European Union

In this work, a comparison between the competences codes in the CDIÓs* curriculum, the ones defined for the Tunning Project and the International Project Management Association (IPMA) is made. The goal is to define the most appropriate competences codes for the engineering education in Latin America. The CDIO code is obtained from the engineering practice, and responds to the Accreditation Board for Engineering and Technology (ABET) standards of accreditation. The Tuning competences are the ones defined for Latin America and the IPMÁs are international competences for project management. It is the first time that the competences defined in ABET accreditation standards in the engineering field are compared with the international competences according to IPMÁs model. The results give evidence that, in first place, there is a need to apply holistic models in the definition of an engineering curriculum. Second, the pertinence of these models in the definition of engineering programs in Latin America.

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework.

Initiatives and facilities for E&T in the nuclear science and technology master at UPM

The present Master/Doctorate in Nuclear Science and Technology programme implemented in the Department of Nuclear Engineering of the Universidad Politécnica de Madrid (NED-UPM) has the excellence qualification by the Spanish Ministry of Education. One of the main of this programme is the training for the development of methodologies of simulation, design and advanced analysis, including experimental tools, necessary in research and in professional work in the nuclear field.

Proposal for a semantic hierarchy of terminological metaphors in science and technology

Cognitive linguistics is considered as one of the most appropriate approaches to the study of scientific and technical language formation and development, where metaphor is accepted to play an essential role. This paper, based on the Cognitive Theory of Metaphor, takes as the starting point the terminological metaphors established in the research project METACITEC(Note 1), which was developed with the purpose of unfolding constitutive metaphors and their function in the language of science and technology. After the analysis of metaphorical terms and using a mixed corpus from the fields of Agriculture, Geology, Mining, Metallurgy, and other related technical fields, this study presents a proposal for a hierarchy of the selected metaphors underlying the scientific conceptual system, based on the semantic distance found in the projection from the source domain to the target domain. We argue that this semantic distance can be considered as an important parameter to take into account in order to establish the metaphoricity of science and technology metaphorical terms. The findings contribute to expand on the CTM stance that metaphor is a matter of cognition by reviewing the abstract-concrete conceptual relationship between the target and source domains, and to determine the role of human creativity and imagination in the language of science and technology configuration

Categorical Missing Data Imputation Using Fuzzy Neural Networks with Numerical and Categorical Inputs

There are many situations where input feature vectors are incomplete and methods to tackle the problem have been studied for a long time. A commonly used procedure is to replace each missing value with an imputation. This paper presents a method to perform categorical missing data imputation from numerical and categorical variables. The imputations are based on Simpson’s fuzzy min-max neural networks where the input variables for learning and classification are just numerical. The proposed method extends the input to categorical variables by introducing new fuzzy sets, a new operation and a new architecture. The procedure is tested and compared with others using opinion poll data.

Organisational learning, strategic rigidity and technology adoption: Implications for electric utilities and renewable energy firms

This paper examines the implications of strategic rigidness for technology adoption behaviours among electric utilities. Such behaviours lead to heterogeneity in firm performance and consequently affect the electric utility industry. The paper's central aim is to identify and describe the implications of strategic rigidness for a utility firm's decision making in adopting newer renewable energy technologies. The findings indicate that not all utility firms are keen to adopt these new technologies, as these firms have traditionally been operating efficiently with a more conventional and mature technological arrangement that has become embedded in the organisational routine. Case studies of Iberdrola S.A. and Enel S.p.A. as major electric utilities are detailed to document mergers and acquisitions and technology adoption decisions. The results indicate that technology adoption behaviours vary widely across utility firms with different organisational learning processes and core capabilities.

Secundary school profile in science and technology versus the first year at the Technical University of Madrid. Cause of failure or quitting?

Se analiza el absentismo, el fallo y el abandono de los estudiantes en los primeros semestres del grado sobre la base de su formación en la educación secundaria.

The NACIR Project: New Applications for CPV'S: A fast way to improve reliability and Technology progress

The main goal of this proposal is to join together the owners of the most advanced CPV technology, with respect to the state of the art, in order to research from its leading position new applications for CPV systems. In addition to opening up new markets, it will unveil possible sources of failure in new environments outside Europe, in order to assure component reliability. The proposed project will also try to improve the current technology of the industrial partners (ISOFOTON and CONCENTRIX) by accelerating the learning curve that CPV must follow in order to reach the competitive market, and lowering the cost under the current flat panel PV significantly within 3-4 years. The use of CPV systems in remote areas, together with harsher radiation, ambient and infrastructure conditions will help to increase the rate of progress of this technology. In addition, the ISFOC s contribution, which brings together seven power plants from seven CPV technologies up to 3 MWpeak, will allow creating the most complete database of components and systems performance to be generated as well as the effects of radiation and meteorology on systems operations. Finally, regarding the new applications for CPV subject, the project will use a CPV system sized 25 kWp in a stand-alone station in Egypt (NWRC) for the first time for water pumping and irrigation purposes. In a similar way ISOFOTON will connect up to 25 kWp CPV to the Moroccan ONE utility grid. From the research content point of view of this project, which is directly addressed by the scope of the call, the cooperative research between UPM, FhG-ISE and the two companies will be favoured by the fact that all are progressing in similar directions: developing two-stage optics CPV systems. In addition to these technology improvements the UPM is very interested in developing a new concept of module, recently patented, which will fulfil all required characteristics of a good CPV with less components and reducing cost.

Specific skills assessment learned by students of building engineering and technical architecture in topics relating to durability and control of concrete structures

In many university courses such as Building Engineering or Technical Architectural, the high density of the contents included in the curriculum, make the student, after graduation, unable to develop the skills already acquired and evaluated in the disciplines of the first courses. From the Group of Educational Innovation at the Polytechnic University of Madrid (UPM) "Teaching of Structural Concrete" (GIEHE) we have conducted a study in which are valued specific skills acquired by students after the first courses of career. We have worked with students from UPM fourth-year career and with Technical Architecture students who have completed their studies and also have completed the Adaptation Course of Technical Architecture to the Building Engineer. The work is part of the Educational Innovation Project funded by the UPM "Integration of training and assessment of generic and specific skills in structural concrete" We have evaluated specific skills learned in the areas of durability and control of structural concrete structures. The results show that overall, students are not able to fully develop the skills already acquired earlier, even being these essential to their professional development. Possibly, the large amount of content taught in these degrees together with a teaching and assessment of "flat profile", ie, which are presented and evaluated with the same intensity as the fundamental and the accessory, are causes enough to cause these results.

Semantic Interoperability: Perspectives and Technology Evaluation

Interoperability between semantic technologies is a must because they need to be in communication to interchange ontologies and use them in the distributed and open environment of the SemanticWeb. However, such interoperability is not straightforward due to the high heterogeneity in such technologies. This chapter describes the problem of semantic technology interoperability from two different perspectives. First, from a theoretical perspective by presenting an overview of the different factors that affect interoperability and, second, from a practical perspective by reusing evaluation methods and applying them to six current semantic technologies in order to assess their interoperability.

Laboratorios virtuales y docencia de la automática en la formación tecnológica de base

Recientemente, ha surgido un interés por aprender a programar, debido a las oportunidades profesionales que da este tipo de estudios universitarios. Es fácil de entender porque el número de trabajos para programadores e ingenieros informáticos está creciendo rápidamente. Por otro lado, un amplio grupo de psicólogos opinan que el pensamiento computacional es una destreza fundamental para cualquiera, no sólo para los ingenieros informáticos. Para leer, escribir y realizar operaciones aritméticas, deberíamos utilizar el pensamiento computacional y por lo tanto, para desarrollar todas las habilidades analíticas de los niños. Es necesario cambiar los requerimientos de las destrezas necesarias para trabajar, los nuevos trabajadores necesitarán destrezas más sofisticadas en ciencias, matemáticas, ingeniería y tecnología. Consecuentemente, los contenidos sobre Tecnología de la Información tales como electrónica, programación, robótica y control se incrementan en la educación tecnológica en enseñanza secundaria. El desarrollo y utilización de los Laboratorios Virtuales de Control y Robótica ayuda a alcanzar este objetivo. Nos vamos a centrar en control y robótica porque un proyecto de control y robótica incluye contenidos de otras tecnologías tales como electrónica, programación, … Se ha implementado un sitio web con Laboratorios Virtuales de Control y Robótica. En este trabajo, se muestran seis grupos de laboratorios virtuales para la enseñanza del control y la robótica a niveles preuniversitarios. Estos laboratorios virtuales han sido usados para la docencia de alumnos de enseñanza secundaria. Las estadísticas del proceso de enseñanza-aprendizaje permiten validar ciertos aspectos de dicho trabajo. Se describen dichos laboratorios y la mejora del aprendizaje en cuanto a conocimientos procedimentales y conceptuales, así como la mejora de la interactividad respecto al aprendizaje con análogas aplicaciones con objetivos de aprendizaje idénticos, pero careciendo de la componente de laboratorio virtual. Se explican algunas de las experiencias realizadas con los alumnos. Los resultados sugieren, que dentro de la educación tecnológica de la educación secundaria, los laboratorios virtuales pueden ser explotados como un efectivo y motivacional entorno de aprendizaje. ABSTRACT Recently, there has been a surge of interest in learning to code, focusing especially on career opportunities. It is easy to understand why: the number of jobs for programmers and computer scientists is growing rapidly. On the other hand, the psychologists think that computational thinking is a fundamental skill for everyone, not just for computer scientists. To reading, writing, and arithmetic, we should add computational thinking to every child’s analytical ability. It is necessary to change workforce requirements mean that new workers will need ever more sophisticated skills in science, mathematics, engineering and technology. Consequently, the contents about Information Technology as well as electronics, coding, robotics and control increase in Technology Education in High School . The development and utilization of the Virtual Laboratories of Control and Robotics help to achieve this goal. We focus on control and robotics because a control and robotics project includes other technologies contents like electronics, coding,... A web site with Virtual Laboratories of Control and Robotics was implemented. In this work, six groups of virtual laboratories for teaching control and robotics in preuniversity level are shown. These Virtual Laboratories were used for teaching students at high school. The statistics of teaching-learning process allow to check some issues of this work. The laboratories, the improvement of learning (concepts and procedures) and interactivity are described and are compared to similar applications. They share identical learning objectives but they lack the virtual laboratory aspect. Some experiences with students are explained too. The results suggest that within high school technology education, virtual laboratories can be exploited as effective and motivational learning environments.

Relevance evaluation of engineering masters program in Peru

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Computing, Engineering and Technology - ICACIT and the Pontificia Universidad Catolica del Peru. The result of this study is a model for relevance evaluation for an engineering master¿s program in Peru.