Thermally tunable polarization by nanoparticle plasmonic resonance in photonic crystal fibers

A photonic crystal fiber selectively filled with silver nanoparticles dispersed in polydimethylsiloxane has been numerically studied via finite elements analysis. These nanoparticles possess a localized surface plasmon resonance in the visible region which depends on the refractive index of the surrounding medium. The refractive index of polydimethylsiloxane can be thermally tuned leading to the design of polarization tunable filters. Filters found with this setup show anisotropic attenuation of the x-polarization fundamental mode around ?x = 1200dB/cm remarkably higher than the y-polarization mode. Moreover, high fiber birefringence and birefringence reversal is observed in the spectral region of the plasmon.

Compilador de consultas tipo SQL para sistema de procesamiento masivo de eventos CEP

El paradigma de procesamiento de eventos CEP plantea la solución al reto del análisis de grandes cantidades de datos en tiempo real, como por ejemplo, monitorización de los valores de bolsa o el estado del tráfico de carreteras. En este paradigma los eventos recibidos deben procesarse sin almacenarse debido a que el volumen de datos es demasiado elevado y a las necesidades de baja latencia. Para ello se utilizan sistemas distribuidos con una alta escalabilidad, elevado throughput y baja latencia. Este tipo de sistemas son usualmente complejos y el tiempo de aprendizaje requerido para su uso es elevado. Sin embargo, muchos de estos sistemas carecen de un lenguaje declarativo de consultas en el que expresar la computación que se desea realizar sobre los eventos recibidos. En este trabajo se ha desarrollado un lenguaje declarativo de consultas similar a SQL y un compilador que realiza la traducción de este lenguaje al lenguaje nativo del sistema de procesamiento masivo de eventos. El lenguaje desarrollado en este trabajo es similar a SQL, con el que se encuentran familiarizados un gran número de desarrolladores y por tanto aprender este lenguaje no supondría un gran esfuerzo. Así el uso de este lenguaje logra reducir los errores en ejecución de la consulta desplegada sobre el sistema distribuido al tiempo que se abstrae al programador de los detalles de este sistema.---ABSTRACT---The complex event processing paradigm CEP has become the solution for high volume data analytics which demand scalability, high throughput, and low latency. Examples of applications which use this paradigm are financial processing or traffic monitoring. A distributed system is used to achieve the performance requisites. These same requisites force the distributed system not to store the events but to process them on the fly as they are received. These distributed systems are complex systems which require a considerably long time to learn and use. The majority of such distributed systems lack a declarative language in which to express the computation to perform over incoming events. In this work, a new SQL-like declarative language and a compiler have been developed. This compiler translates this new language to the distributed system native language. Due to its similarity with SQL a vast amount of developers who are already familiar with SQL will need little time to learn this language. Thus, this language reduces the execution failures at the time the programmer no longer needs to know every single detail of the underlying distributed system to submit a query.

Análisis Constructivo y Dimensional de las Fachadas de la Gran Vía madrileña en el primer tramo de la calle

Esta investigación analiza la solución constructiva y dimensional de las fachadas del primer tramo de la Gran Vía madrileña y señala, entre otros aspectos, la aportación que supuso en el Sector de la Construcción español, la incorporación de perfilería metálica a la fábrica en los edificios del primer tramo de la calle, constituyendo el punto de partida del construir moderno del Madrid de principios del Siglo XX. Se han analizado sistemas y modulaciones que sintetizan, en un catálogo de fichas el modo constructivo de los primeros lustros del SXX. La metodología se ha centrado en el diseño de las fichas que describo a continuación: • Ficha de Histórica de datos generales (hitos históricos), esta ficha resume la historia de la construcción del edificio, indicando usos tanto originales como actuales, propiedad, fecha de construcción, e intervenciones constatadas. Especial significado para el desarrollo del trabajo tiene la definición de usos tanto originales como actuales. El uso del edificio se ha interpretado como la función. • Ficha dimensional, muestra medidas tanto en el eje X como en el Y, o en Z, en concreto intereje de huecos, medidas de entrepaños, ancho de huecos; medidas de suelo a suelo, medida del hueco más dintel; medidas de vuelos de balcones y/o miradores, y otros parámetros como porcentaje de huecos en fachada, frecuencia de aparición de los distintos huecos, su proporción alto ancho; parámetros que definen dimensionalmente los elementos que constituyen la fachada del edificio. Esta Ficha se acompaña del alzado de cada edificio acotado y de una fotografía actual. • Ficha de elementos y sistemas constructivos, en función del soporte (composición) y/o del material de acabado recogen datos obtenidos de la documentación gráfica y memorias existente en el archivo histórico y/o de documentación gráfica realizada por arquitectos que han intervenido en estos edificios. Tanto el contacto establecido con los arquitectos intervinientes, propietarios y empresas constructoras, como la localización de manuales de construcción fechados entre 1870 y 1925, han ayudado a definir a través de este catálogo de Fichas, los tipos (sistemas) constructivos y las modulaciones empleadas, una métrica que define con matemáticas la geometría del diseño, expresando además toda la carga de magia, encantamiento y siempre de modelo y orden que permanece en las fachadas de estos edificios. El desarrollo de estas técnicas denominadas en 1915 modernas han supuesto un cambio importante en el diseño, pues éste es un hecho diferencial en esta arquitectura con estructura metálica con respecto a los sistemas constructivos anteriores, permitiendo reducir el espesor del muro, y conseguir luces superiores tanto en huecos como en los vuelos de elementos salientes (balcones y miradores ) y consiguiendo un diseño acorde con la importancia del edificio. Una vez analizado el uso del edificio, sus dimensiones y los sistemas empleados, (siempre referidos al estudio de fachadas), se ha podido comprobar la relación entre Dimensión, Sistema y Función y los casos concretos en que esto sucede. La inspección visual y seguimiento de la calle han constatado la frecuencia de las labores de mantenimiento, reparación, o restauración en las fachadas de estos edificios. Estos conocimientos serán importantes de cara a intervenciones posteriores en el tiempo, quizá en los próximos 100 años. ABSTRACT Innovative techniques used in Spanish construction (for houses and buildings) emerged at the beginning of the 20th century. Reinforced steel profiles instead of traditional masonry was one of the most important innovations that was introduced. In order to make the most of the space available, masonry had to be as light as possible. This paper will examine the façades of these first buildings in “Gran Vía” Street and aims to show how they were constructed. Field work was carried out in order to analyze both the history of how the buildings were constructed and the construction and dimensional systems of the façade elements. Comprehending these building techniques and characteristics is the purpose of this Investigation. Some data sheets (cards) have been designed for finding out about historical information, uses, modulations and construction systems, in order to determine the relation between the Function, Dimension and System in these buildings. • The historical card shows date of construction, uses, propertys not only the original ones but nowadays, interventions special interest keeps the use or finality of the building. • The dimensional card shows measurements not only of axis X but also Y and Z, specifically the centre distance of openings, measurements of stretches of walls, the width of openings; floor to floor measurements, measurement of windows plus lintels; balcony overhangs and / or bay windows, and other parameters such as the percentage of façade openings, the frequency of the appearance of different openings, their proportion regarding height and width; parameters that dimensionally define the elements that make the façade of the building. This Card accompanies of the elevation of every measured building plus a current photograph. • Card of elements and building systems, depending on the support (composition) and / or the finish material that compiles information obtained from the existing graphic documentation and reports from historic files and / or graphic documentation drawn up by architects who have intervened in these buildings. The visual inspection and follow-up of the street confirm the frequency of maintenance work, repairs, or restoration of the façades of these buildings. Comprehension of these techniques and characteristics will enable future intervention, maybe in the next century.

Some examples of the simultaneous use of closed-form and numerical solutions in shell structural analysis

The computational advantages of the use of different approaches -numerical and analytical ones- to the analysis of different parts of the same shell structure are discussed. Examples of large size problems that can be reduced to those more suitable to be handled by a personal related axisyrometric finite elements, local unaxisymmetric shells, geometric quasi-regular shells, infinite elements and homogenization techniques are described

Passenger Exposure to Magnetic Fields due to the Batteries of an Electric Vehicle

In electric vehicles, passengers sit very close to an electric system of significant power. The high currents achieved in these vehicles mean that the passengers could be exposed to significant magnetic fields. One of the electric devices present in the power train are the batteries. In this paper, a methodology to evaluate the magnetic field created by these batteries is presented. First, the magnetic field generated by a single battery is analyzed using finite elements simulations. Results are compared to laboratory measurements, taken from a real battery, in order to validate the model. After this, the magnetic field created by a complete battery pack is estimated and results are discussed.

Measurement of Distributed Antenna Systems at 2.4 GHz in a Realistic Subway Tunnel Environment.

Accurate characterization of the radio channel in tunnels is of great importance for new signaling and train control communications systems. To model this environment, measurements have been taken at 2.4 GHz in a real environment in Madrid subway. The measurements were carried out with four base station transmitters installed in a 2-km tunnel and using a mobile receiver installed on a standard train. First, with an optimum antenna configuration, all the propagation characteristics of a complex subway environment, including near shadowing, path loss,shadow fading, fast fading, level crossing rate (LCR), and average fade duration (AFD), have been measured and computed. Thereafter, comparisons of propagation characteristics in a double-track tunnel (9.8-m width) and a single-track tunnel (4.8-m width) have been made. Finally, all the measurement results have been shown in a complete table for accurate statistical modeling.

Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites

Modeling and prediction of the overall elastic–plastic response and local damage mechanisms in heterogeneous materials, in particular particle reinforced composites, is a very complex problem. Microstructural complexities such as the inhomogeneous spatial distribution of particles, irregular morphology of the particles, and anisotropy in particle orientation after secondary processing, such as extrusion, significantly affect deformation behavior. We have studied the effect of particle/matrix interface debonding in SiC particle reinforced Al alloy matrix composites with (a) actual microstructure consisting of angular SiC particles and (b) idealized ellipsoidal SiC particles. Tensile deformation in SiC particle reinforced Al matrix composites was modeled using actual microstructures reconstructed from serial sectioning approach. Interfacial debonding was modeled using user-defined cohesive zone elements. Modeling with the actual microstructure (versus idealized ellipsoids) has a significant influence on: (a) localized stresses and strains in particle and matrix, and (b) far-field strain at which localized debonding takes place. The angular particles exhibited higher degree of load transfer and are more sensitive to interfacial debonding. Larger decreases in stress are observed in the angular particles, because of the flat surfaces, normal to the loading axis, which bear load. Furthermore, simplification of particle morphology may lead to erroneous results.

Finite element code-based modeling of a multi-feature isolation system and passive alleviation of possible inner pounding

The existing seismic isolation systems are based on well-known and accepted physical principles, but they are still having some functional drawbacks. As an attempt of improvement, the Roll-N-Cage (RNC) isolator has been recently proposed. It is designed to achieve a balance in controlling isolator displacement demands and structural accelerations. It provides in a single unit all the necessary functions of vertical rigid support, horizontal flexibility with enhanced stability, resistance to low service loads and minor vibration, and hysteretic energy dissipation characteristics. It is characterized by two unique features that are a self-braking (buffer) and a self-recentering mechanism. This paper presents an advanced representation of the main and unique features of the RNC isolator using an available finite element code called SAP2000. The validity of the obtained SAP2000 model is then checked using experimental, numerical and analytical results. Then, the paper investigates the merits and demerits of activating the built-in buffer mechanism on both structural pounding mitigation and isolation efficiency. The paper addresses the problem of passive alleviation of possible inner pounding within the RNC isolator, which may arise due to the activation of its self-braking mechanism under sever excitations such as near-fault earthquakes. The results show that the obtained finite element code-based model can closely match and accurately predict the overall behavior of the RNC isolator with effectively small errors. Moreover, the inherent buffer mechanism of the RNC isolator could mitigate or even eliminate direct structure-tostructure pounding under severe excitation considering limited septation gaps between adjacent structures. In addition, the increase of inherent hysteretic damping of the RNC isolator can efficiently limit its peak displacement together with the severity of the possibly developed inner pounding and, therefore, alleviate or even eliminate the possibly arising negative effects of the buffer mechanism on the overall RNC-isolated structural responses.