Analysis of ad hoc routing protocols for emergency and rescue scenarios.

A mobile ad hoc network MANET is a collection of wireless mobile nodes that can dynamically configure a network without a fixed infrastructure or centralized administration. This makes it ideal for emergency and rescue scenarios where information sharing is essential and should occur as soon as possible. This article discusses which of the routing strategies for mobile ad hoc networks: proactive, reactive and hierarchical, have a better performance in such scenarios. Using a real urban area being set for the emergency and rescue scenario, we calculate the density of nodes and the mobility model needed for validation. The NS2 simulator has been used in our study. We also show that the hierarchical routing strategies are beffer suited for this type of scenarios.

Distributed target tracking based on belief propagation consensus

Distributed target tracking in wireless sensor networks (WSN) is an important problem, in which agreement on the target state can be achieved using conventional consensus methods, which take long to converge. We propose distributed particle filtering based on belief propagation (DPF-BP) consensus, a fast method for target tracking. According to our simulations, DPF-BP provides better performance than DPF based on standard belief consensus (DPF-SBC) in terms of disagreement in the network. However, in terms of root-mean square error, it can outperform DPF-SBC only for a specific number of consensus iterations.

The DLMT hardware implementation. A comparative study with the DCT and the DWT

In the last recent years, with the popularity of image compression techniques, many architectures have been proposed. Those have been generally based on the Forward and Inverse Discrete Cosine Transform (FDCT, IDCT). Alternatively, compression schemes based on discrete "wavelets" transform (DWT), used, both, in JPEG2000 coding standard and in H264-SVC (Scalable Video Coding) standard, do not need to divide the image into non-overlapping blocks or macroblocks. This paper discusses the DLMT (Discrete Lopez-Moreno Transform) hardware implementation. It proposes a new scheme intermediate between the DCT and the DWT, comparing results of the most relevant proposed architectures for benchmarking. The DLMT can also be applied over a whole image, but this does not involve increasing computational complexity. FPGA implementation results show that the proposed DLMT has significant performance benefits and improvements comparing with the DCT and the DWT and consequently it is very suitable for implementation on WSN (Wireless Sensor Network) applications.

Power management techniques in an FPGA-Based WSN node for high performance application

In this work, the power management techniques implemented in a high-performance node for Wireless Sensor Networks (WSN) based on a RAM-based FPGA are presented. This new node custom architecture is intended for high-end WSN applications that include complex sensor management like video cameras, high compute demanding tasks such as image encoding or robust encryption, and/or higher data bandwidth needs. In the case of these complex processing tasks, yet maintaining low power design requirements, it can be shown that the combination of different techniques such as extensive HW algorithm mapping, smart management of power islands to selectively switch on and off components, smart and low-energy partial reconfiguration, an adequate set of save energy modes and wake up options, all combined, may yield energy results that may compete and improve energy usage of typical low power microcontrollers used in many WSN node architectures. Actually, results show that higher complexity tasks are in favor of HW based platforms, while the flexibility achieved by dynamic and partial reconfiguration techniques could be comparable to SW based solutions.

Simulador WKM para gestión de conocimiento en una WSN

La gestión del conocimiento (KM) se basa en la captación, filtración, procesamiento y análisis de unos datos en bruto que con dicho refinamiento podrán llegar a convertirse en conocimiento o Sabiduría. Estas prácticas tendrán lugar en este PFC en una WSN (Wireless Sensor Network) compuesta de unos sofisticados dispositivos comúnmente conocidos como “motas” y cuya principal característica son sus bajas capacidades en cuanto a memoria, batería o autonomía. Ha sido objetivo primordial de este Proyecto de fin de Carrera aunar una WSN con la Gestión del Conocimiento así como demostrar que es posible llevar a cabo grandes procesamientos de información, con tan bajas capacidades, si se distribuyen correctamente los procesos. En primera instancia, se introducen conceptos básicos acerca de las WSN (Wireless Sensor Networks) así como de los elementos principales en dichas redes. Tras conocer el modelo de arquitectura de comunicaciones se procede a presentar la Gestión del Conocimiento de forma teórica y a continuación la interpretación que se ha hecho a partir de diversas referencias bibliográficas para llevar a cabo la implementación del proyecto. El siguiente paso es describir punto por punto todos los componentes del Simulador; librerías, funcionamiento y demás cuestiones sobre configuración y puesta a punto. Como escenario de aplicación se plantea una red de sensores inalámbricos básica cuya topología y ubicación es completamente configurable. Se lleva a cabo una configuración a nivel de red basada en el protocolo 6LowPAN pero con posibilidad de simplificarlo. Los datos se procesan de acuerdo a un modelo piramidal de Gestión de Conocimiento adaptable a las necesidades del usuario. Mediante la utilización de las diversas opciones que proporciona la interfaz gráfica implementada y los documentos de resultados que se van generando, se puede llevar a cabo un detallado estudio posterior de la simulación y comprobar si se cumplen las expectativas planteadas. Knowledge management (KM) is based on the collection, filtering, processing and analysis of some raw data which such refinement it can be turned into knowledge or wisdom. These practices will take place in a WSN (Wireless Sensor Network) consists of sophisticated devices commonly known as "dots" and whose main characteristics are its low capacity for memory, battery or autonomy. A primary objective of this Project will be to join a WSN with Knowledge Management and show that it is possible make largo information processing, with such low capacity if the processes are properly distributed. First, we introduce basic concepts about the WSN (Wireless Sensor Networks) and major elements of these networks. After meeting the communications architecture model, we proceed to show the Knowledge Management theory and then the interpretation of several bibliographic references to carry out the project implementation. The next step is discovering point by point all over the Simulator components; libraries, operation and the rest of points about configuration and tuning. As application scenario we propose a basic wireless sensor network whose topology and location is completely customizable. It will perform a network level configuration based in W6LowPAN Protocol. Data is processed according to a pyramidal pattern Knowledge Management adaptable to the user´s needs. The hardware elements will suffer more or less energy dependence depending on their role and activity in the network. Through the various options that provide the graphical interface has been implemented and results documents that are generated, can be carried out after a detailed study of the simulation and verify compliance with the expectations raised.

Consolidation of a wsn and minimax method to rapidly neutralise intruders in strategic installations

Due to the sensitive international situation caused by still-recent terrorist attacks, there is a common need to protect the safety of large spaces such as government buildings, airports and power stations. To address this problem, developments in several research fields, such as video and cognitive audio, decision support systems, human interface, computer architecture, communications networks and communications security, should be integrated with the goal of achieving advanced security systems capable of checking all of the specified requirements and spanning the gap that presently exists in the current market. This paper describes the implementation of a decision system for crisis management in infrastructural building security. Specifically, it describes the implementation of a decision system in the management of building intrusions. The positions of the unidentified persons are reported with the help of a Wireless Sensor Network (WSN). The goal is to achieve an intelligent system capable of making the best decision in real time in order to quickly neutralise one or more intruders who threaten strategic installations. It is assumed that the intruders’ behaviour is inferred through sequences of sensors’ activations and their fusion. This article presents a general approach to selecting the optimum operation from the available neutralisation strategies based on a Minimax algorithm. The distances among different scenario elements will be used to measure the risk of the scene, so a path planning technique will be integrated in order to attain a good performance. Different actions to be executed over the elements of the scene such as moving a guard, blocking a door or turning on an alarm will be used to neutralise the crisis. This set of actions executed to stop the crisis is known as the neutralisation strategy. Finally, the system has been tested in simulations of real situations, and the results have been evaluated according to the final state of the intruders. In 86.5% of the cases, the system achieved the capture of the intruders, and in 59.25% of the cases, they were intercepted before they reached their objective.

Propuesta de aplicación de una red de sensores en emergencias

El auge y evolución de los sistemas de comunicaciones móviles y de las redes inalámbricas avanzadas, sucedido desde principios del siglo XXI, han propiciado el uso de Redes de Sensores Inalámbricos (RSI) en múltiples ámbitos de interés. Dichas redes están típicamente compuestas por dispositivos inalámbricos autónomos que incorporan sensores para la recogida de datos de distinta naturaleza. Las RSI se caracterizan por su escalabilidad, ausencia de cableado, pequeño tamaño, bajo consumo, gran variedad de magnitudes físico/químicas medibles, entre otras, cuyas cualidades las hace muy interesantes para su aplicación en multitud de escenarios de la Sociedad de la Información, tales como domótica, agricultura y ganadería, medioambiente, salud, procesos industriales, logística, seguridad o ciudades inteligentes, ente otras. En este Trabajo Fin de Máster, se propone el uso de las RSI en el escenario de Emergencias donde cobra gran importancia la usabilidad, la fiabilidad, la disponibilidad, y la robustez de los sistemas a emplear en condiciones hostiles, especialmente en las de bomberos. Es por ello que se analizarán previamente los trabajos de RSI desarrollados para estos entornos y que sugieren qué aplicaciones garantizan el cumplimiento de los requerimientos mencionados. Se aborda la utilización de una primera RSI para la monitorización ambiental de tres Centros de Procesado de Datos (CPD) del departamento de TI de Emergencias, siendo este un entorno sin movilidad, más controlado y que aporta la adquisición de experiencia en la utilización de las RSI de cara a un entorno móvil más complejo. A continuación, para el entorno móvil se ha desarrollado y validado un prototipo experimental de RSI para el seguimiento de salida de parques de bomberos de vehículos con su dotación. Así mismo se implementa un prototipo para la ayuda a la localización de bomberos y/o personas en un siniestro. Estas RSI se desarrollan e implantan en el entorno de Emergencias del Ayuntamiento de Madrid, entidad sin cuyo apoyo habría sido imposible la aplicación práctica de este trabajo. SUMMARY. The rise and evolution of mobile communication systems and advanced wireless networks in early XXI century have allowed to taking advantage of Wireless Sensor Networks (WSN). These networks are composed of independent wireless devices that incorporate sensors for collecting data of different nature. The WSN is characterized by its scalability, no wiring, small size, low power consumption, wide range of physical magnitudes measurable, among others. These qualities make them very interesting for application in many scenarios to the Information Society, such as, domotic, agriculture, smart environment, ehealth, industrial control, logistics, security and smart cities, among others. This work proposes to use WSN in the emergency scenario where is very important the usability, reliability, availability, and robustness of the systems to be used in hostile conditions, especially in fire-fighters environment. That is why WSN works in emergency will be studied to tackle what applications compliance with the above requirements. The first WSN developed will be environmental monitoring of three CPDs IT department Emergency. This scenario is a non-mobile environment, more controlled and bring gaining experience in the use of WSN to face mobile environment which is more complex. Then, for the mobile environment is developed an experimental prototype of WSN for tracking fire vehicles living fire stations with their equipment. Another prototype is foreseen to be implemented to assist fire-fighters location and / or people in a disaster. These WSN are developed and implemented for Madrid City Emergency, whose involvement was critical to put this research into stage.

An Internet of Things approach for managing smart services provided by wearable devices.

The Internet of Things (IoT) is growing at a fast pace with new devices getting connected all the time. A new emerging group of these devices are the wearable devices, and Wireless Sensor Networks are a good way to integrate them in the IoT concept and bring new experiences to the daily life activities. In this paper we present an everyday life application involving a WSN as the base of a novel context-awareness sports scenario where physiological parameters are measured and sent to the WSN by wearable devices. Applications with several hardware components introduce the problem of heterogeneity in the network. In order to integrate different hardware platforms and to introduce a service-oriented semantic middleware solution into a single application, we propose the use of an Enterprise Service Bus (ESB) as a bridge for guaranteeing interoperability and integration of the different environments, thus introducing a semantic added value needed in the world of IoT-based systems. This approach places all the data acquired (e.g., via Internet data access) at application developers disposal, opening the system to new user applications. The user can then access the data through a wide variety of devices (smartphones, tablets, computers) and Operating Systems (Android, iOS, Windows, Linux, etc.).

Desarrollo de aplicaciones de comunicaciones inalámbricas en sistemas de monitorización estructural desarrollados en aeronáutica.

Los Sistemas de SHM o de monitorización de la integridad estructural surgen ante la necesidad de mejorar los métodos de evaluación y de test no destructivos convencionales. De esta manera, se puede tener controlado todo tipo de estructuras en las cuales su correcto estado o funcionamiento suponga un factor crítico. Un Sistema SHM permite analizar una estructura concreta capturando de manera periódica el estado de la integridad estructural, que en este proyecto se ha aplicado a estructuras aeronáuticas. P.A.M.E.L.A. (Phase Array Monitoring for Enhanced Life Assessment) es la denominación utilizada para definir una serie de equipos electrónicos para Sistemas SHM desarrollados por AERNOVA y los Grupos de Diseño Electrónico de las universidades UPV/EHU y UPM. Los dispositivos P.A.M.E.L.A. originalmente no cuentan con tecnología Wi-Fi, por lo que incorporan un módulo hardware independiente que se encarga de las comunicaciones inalámbricas, a los que se les denomina Nodos. Estos Nodos poseen un Sistema Operativo propio y todo lo necesario para administrar y organizar la red Mallada Wi-Fi. De esta manera se obtiene una red mallada inalámbrica compuesta por Nodos que interconectan los Sistemas SHM y que se encargan de transmitir los datos a los equipos que procesan los resultados adquiridos por P.A.M.E.L.A. Los Nodos son dispositivos empotrados que llevan instalados un firmware basado en una distribución de Linux para Nodos (o Routers), llamado Openwrt. Que para disponer de una red mallada necesitan de un protocolo orientado a este tipo de redes. Entre las opciones de protocolo más destacadas se puede mencionar: DSDV (Destination Sequenced Distance Vector), OLSR (Optimized Link State Routing), B.A.T.M.A.N-Adv (Better Approach To Mobile Adhoc Networking Advance), BMX (una versión de B.A.T.M.A.N-Adv), AODV (Ad hoc On-Demand Distance Vector) y el DSR (Dynamic Source Routing). Además de la existencia de protocolos orientados a las redes malladas, también hay organizaciones que se dedican a desarrollar firmware que los utilizan, como es el caso del firmware llamado Nightwing que utiliza BMX, Freifunk que utiliza OLSR o Potato Mesh que utiliza B.A.T.M.A.N-Adv. La ventaja de estos tres firmwares mencionados es que las agrupaciones que las desarrollan proporcionan las imágenes precompiladas del sistema,listas para cargarlas en distintos modelos de Nodos. En este proyecto se han instalado las imágenes en los Nodos y se han probado los protocolos BMX, OLSR y B.A.T.M.A.N.-Adv. Concluyendo que la red gestionada por B.A.T.M.A.N.-Adv era la que mejor rendimiento obtenía en cuanto a estabilidad y ancho de banda. Después de haber definido el protocolo a usar, se procedió a desarrollar una distribución basada en Openwrt, que utilice B.A.T.M.A.N.-Adv para crear la red mallada, pero que se ajuste mejor a las necesidades del proyecto, ya que Nightwing, Freifunk y Potato Mesh no lo hacían. Además se implementan aplicaciones en lenguaje ANSI C y en LabVIEW para interactuar con los Nodos y los Sistemas SHM. También se procede a hacer alguna modificación en el Hardware de P.A.M.E.L.A. y del Nodo para obtener una mejor integración entre los dos dispositivos. Y por ultimo, se prueba la transferencia de datos de los Nodos en distintos escenarios. ABSTRACT. Structural Health Monitoring (SHM) systems arise from the need of improving assessment methods and conventional nondestructive tests. Critical structures can be monitored using SHM. A SHM system analyzes periodically a specific structure capturing the state of structural integrity. The aim of this project is to contribute in the implementation of Mesh network for SHM system in aircraft structures. P.A.M.E.L.A. (Phase Array Monitoring for Enhanced Life Assessment) is the name for electronic equipment developed by AERNOVA, the Electronic Design Groups of university UPV/EHU and the Instrumentation and Applied Acoustics research group from UPM. P.A.M.E.L.A. devices were not originally equipped with Wi-Fi interface. In this project a separate hardware module that handles wireless communications (nodes) has been added. The nodes include an operating system for manage the Wi-Fi Mesh Network and they form the wireless mesh network to link SHM systems with monitoring equipment. Nodes are embedded devices with an installed firmware based on special Linux distribution used in routers or nodes, called OpenWRT. They need a Mesh Protocol to stablish the network. The most common protocols options are: DSDV (Destination Sequenced Distance Vector), OLSR (Optimized Link State Routing), BATMAN-Adv (Better Approach To Mobile Ad-hoc Networking Advance), BMX (a version of BATMAN-Adv) AODV (Ad hoc on-Demand Distance Vector) and DSR (Dynamic Source Routing). In addition, there are organizations that are dedicated to develope firmware using these Mesh Protocols, for instance: Nightwing uses BMX, Freifunk use OLSR and Potato Mesh uses BATMAN-Adv. The advantage of these three firmwares is that these groups develop pre-compiled images of the system ready to be loaded in several models of Nodes. In this project the images were installed in the nodes. In this way, BMX, OLSR and BATMAN-Adv have been tested. We conclude that the protocol BATMAN-Adv has better performance in terms of stability and bandwidth. After choosing the protocol, the objective was to develop a distribution based on OpenWRT, using BATMAN-Adv to create the mesh network. This distribution is fitted to the requirements of this project. Besides, in this project it has been developed applications in C language and LabVIEW to interact with the Nodes and the SHM systems. The project also address some modifications to the PAMELA hardware and the Node, for better integration between both elements. Finally, data transfer tests among the different nodes in different scenarios has been carried out.

Virtualización de dispositivos para servicios en la Ciudad del Futuro

El aumento de las capacidades de interconexión de dispositivos de todo tipo está suponiendo una revolución en el campo de la prestación de servicios, tanto en la cantidad como en la variedad. Esta evolución ha puesto de manifiesto la necesidad de abordar un desarrollo tecnológico sin precedentes, donde la previsión de dispositivos interconectados e interoperando entre sí y con las personas alcanza cifras del orden de los millardos. Esta idea de un mundo de cosas interconectadas ha dado lugar a una visión que se ha dado en llamar Internet de las Cosas. Un mundo donde las cosas de cualquier tipo pueden interactuar con otras cosas, incluyendo las que forman parte de redes con recurso limitados. Y esto además conduce a la creación de servicios compuestos que superan a la suma de las partes. Además de la relevancia tecnológica, esta nueva visión enlaza con la de la Ciudad del Futuro. Un concepto que recurre a la convergencia de la energía, el transporte y las tecnologías de la información y las comunicaciones para definir una forma mediante la que lograr el crecimiento sostenible y competitivo, mejorando así la calidad de vida y abriendo el gobierno de las ciudades a la participación ciudadana. En la línea de desarrollo que permite avanzar hacia la consecución de tales objetivos, este Proyecto Fin de Carrera propone una forma de virtualizar los servicios ofrecidos por la diversidad de dispositivos que van adquiriendo la capacidad de interoperar en una red. Para ello se apoya en el uso de una capa de intermediación orientada a servicios, nSOM, desarrollada en la EUITT. Sobre esta arquitectura se proponen como objetivos el diseño y desarrollo de una pasarela de servicios que haga accesibles desde la web los recursos ofrecidos en una red de sensores; el diseño y desarrollo de un registro de dispositivos y servicios en concordancia a la propuesta de arquitectura de referencia para Internet de las Cosas; y el estudio y diseño de un marco para la composición de servicios orquestados en redes de recursos limitados. Para alcanzar estos objetivos primero se abordará un estudio del estado del arte donde se profundizará en el conocimiento de la las tecnologías para la interoperatividad entre cosas, abordando los principios de las redes inalámbricas de sensores y actuadores, las arquitecturas para las comunicaciones Máquina a Máquina e Internet de las Cosas, y la visión de la Web de las Cosas. Seguidamente se tratarán las tecnologías de red y de servicios de interés, para finalizar con un breve repaso a las tecnologías para la composición de servicios. Le seguirá una descripción detallada de la arquitectura nSOM y del diseño propuesto para este proyecto. Finalmente se propondrá un escenario sobre el que se llevarán a cabo diferentes pruebas de validación. ABSTRACT. The increasing of the capabilities of all kind of devices is causing a revolution in the field of the provision of services, both in quantity and in diversity. This situation has highlighted the need to address unprecedented technological development, where the forecast of interconnected and interoperable devices between them and human beings reaches the order of billions. And these numbers go further when the connectivity of constrained networks is taken into account. This idea of an interconnected world of things has led to a vision that has been called "The Internet of Things". It’s a vision of a world where things of any kind can interact with other things, even those in the domain of a constrained network. This also leads to the creation of new composed services that exceed the sum of the parts. Besides the technological interest, this new vision relates with the one from the Smart City. A concept that uses the convergence of the energy, the transport, and the information and communication technologies to define a way to achieve sustainable and competitive growth, improving the quality of life, and opening the governance of the cities to the participation. In the development pathway to reach these goals, this Final Degree Dissertation proposes a way for the virtualization of the services offered by the variety of devices that are reaching the ability to interoperate in a network. For this it is supported by a service oriented middleware called nSOM that has been developed at EUITT. Using this architecture the goals proposed for this project are the design and development of a service gateway that makes available the resources of a sensor network through a web interface; the design and development of a Device & Service Registry according to the reference architecture proposal for the Internet of Things; and the study and design of a composition framework for orchestrated services in constrained networks. To achieve these goals this dissertation begins with a State of the Art study where the background knowledge about the technologies in use for the interoperation of things will be settled. At first it starts talking about Wireless Sensor and Actuator Networks, the architectures for Machine-to-Machine communication and Internet of Things, and also the concepts for the Web of Things vision. Next the related network and services technologies are explored, ending with a brief review of service composition technologies. Then will follow a detailed description of the nSOM architecture, and also of the proposed design for this project. Finally a scenario will be proposed where a series of validation tests will be conducted.

Open Technologies for prototyping the Internet of Things

The worldwide "hyper-connection" of any object around us is the challenge that promises to cover the paradigm of the Internet of Things. If the Internet has colonized the daily life of more than 2000 million1 people around the globe, the Internet of Things faces of connecting more than 100000 million2 "things" by 2020. The underlying Internet of Things’ technologies are the cornerstone that promises to solve interrelated global problems such as exponential population growth, energy management in cities, and environmental sustainability in the average and long term. On the one hand, this Project has the goal of knowledge acquisition about prototyping technologies available in the market for the Internet of Things. On the other hand, the Project focuses on the development of a system for devices management within a Wireless Sensor and Actuator Network to offer some services accessible from the Internet. To accomplish the objectives, the Project will begin with a detailed analysis of various “open source” hardware platforms to encourage creative development of applications, and automatically extract information from the environment around them for transmission to external systems. In addition, web platforms that enable mass storage with the philosophy of the Internet of Things will be studied. The project will culminate in the proposal and specification of a service-oriented software architecture for embedded systems that allows communication between devices on the network, and the data transmission to external systems. Furthermore, it abstracts the complexities of hardware to application developers. RESUMEN. La “hiper-conexión” a nivel mundial de cualquier objeto que nos rodea es el desafío al que promete dar cobertura el paradigma de la Internet de las Cosas. Si la Internet ha colonizado el día a día de más de 2000 millones1 de personas en todo el planeta, la Internet de las Cosas plantea el reto de conectar a más de 100000 millones2 de “cosas” para el año 2020. Las tecnologías subyacentes de la Internet de las Cosas son la piedra angular que prometen dar solución a problemas globales interrelacionados como el crecimiento exponencial de la población, la gestión de la energía en las ciudades o la sostenibilidad del medioambiente a largo plazo. Este Proyecto Fin de Carrera tiene como principales objetivos por un lado, la adquisición de conocimientos acerca de las tecnologías para prototipos disponibles en el mercado para la Internet de las Cosas, y por otro lado el desarrollo de un sistema para la gestión de dispositivos de una red inalámbrica de sensores que ofrezcan unos servicios accesibles desde la Internet. Con el fin de abordar los objetivos marcados, el proyecto comenzará con un análisis detallado de varias plataformas hardware de tipo “open source” que estimulen el desarrollo creativo de aplicaciones y que permitan extraer de forma automática información del medio que les rodea para transmitirlo a sistemas externos para su posterior procesamiento. Por otro lado, se estudiarán plataformas web identificadas con la filosofía de la Internet de las Cosas que permitan el almacenamiento masivo de datos que diferentes plataformas hardware transfieren a través de la Internet. El Proyecto culminará con la propuesta y la especificación una arquitectura software orientada a servicios para sistemas empotrados que permita la comunicación entre los dispositivos de la red y la transmisión de datos a sistemas externos, así como facilitar el desarrollo de aplicaciones a los programadores mediante la abstracción de la complejidad del hardware.

Behavior of Ad Hoc routing protocols, analyzed for emergency and rescue scenarios, on a real urban area

A mobile Ad Hoc network (MANET) is a collection of wireless mobile nodes that can dynamically configure a network without a fixed infrastructure or central administration. This makes it ideal for emergency and rescue scenarios, where sharing information is essential and should occur as soon as possible. This article discusses which of the routing strategies for mobile MANETs: proactive, reactive or hierarchical, has a better performance in such scenarios. By selecting a real urban area for the emergency and rescue scenario, we calculated the density of nodes and the mobility model needed for the validation study of AODV, DSDV and CBRP in the routing model. The NS2 simulator has been used for our study. We also show that the hierarchical routing strategies are better suited for this type of scenarios.

Cooperative localization in mobile networks using nonparametric variants of belief propagation

Of the many state-of-the-art methods for cooperative localization in wireless sensor networks (WSN), only very few adapt well to mobile networks. The main problems of the well-known algorithms, based on nonparametric belief propagation (NBP), are the high communication cost and inefficient sampling techniques. Moreover, they either do not use smoothing or just apply it o ine. Therefore, in this article, we propose more flexible and effcient variants of NBP for cooperative localization in mobile networks. In particular, we provide: i) an optional 1-lag smoothing done almost in real-time, ii) a novel low-cost communication protocol based on package approximation and censoring, iii) higher robustness of the standard mixture importance sampling (MIS) technique, and iv) a higher amount of information in the importance densities by using the population Monte Carlo (PMC) approach, or an auxiliary variable. Through extensive simulations, we confirmed that all the proposed techniques outperform the standard NBP method.

PUE attack detection in CWSNs using anomaly detection techniques

Cognitive wireless sensor network (CWSN) is a new paradigm, integrating cognitive features in traditional wireless sensor networks (WSNs) to mitigate important problems such as spectrum occupancy. Security in cognitive wireless sensor networks is an important problem since these kinds of networks manage critical applications and data. The specific constraints of WSN make the problem even more critical, and effective solutions have not yet been implemented. Primary user emulation (PUE) attack is the most studied specific attack deriving from new cognitive features. This work discusses a new approach, based on anomaly behavior detection and collaboration, to detect the primary user emulation attack in CWSN scenarios. Two non-parametric algorithms, suitable for low-resource networks like CWSNs, have been used in this work: the cumulative sum and data clustering algorithms. The comparison is based on some characteristics such as detection delay, learning time, scalability, resources, and scenario dependency. The algorithms have been tested using a cognitive simulator that provides important results in this area. Both algorithms have shown to be valid in order to detect PUE attacks, reaching a detection rate of 99% and less than 1% of false positives using collaboration.

Sistema de selección automática de soluciones tecnológicas de seguridad

Desde la aparición de Internet, hace ya más de 20 años ha existido por parte de diversos sectores de la sociedad, científicos, empresas, usuarios, etc. la inquietud por la aplicación de esta tecnología a lo que se ha dado en llamar “El Internet de las Cosas”, que no es más que el control a distancia de cualquier elemento útil o necesario para la vida cotidiana y la industria. Sin embargo el desarrollo masivo de aplicaciones orientadas a esto, no ha evolucionado hasta que no se han producido avances importantes en dos campos: por un lado, en las Redes Inalámbricas de Sensores (WSN), redes compuestas por un conjunto de pequeños dispositivos capaces de transmitir la información que recogen, haciéndola llegar desde su propia red inalámbrica, a otras de amplia cobertura y por otro con la miniaturización cada vez mayor de dispositivos capaces de tener una autonomía suficiente como para procesar datos e interconectarse entre sí. Al igual que en las redes de ordenadores convencionales, las WSN se pueden ver comprometidas en lo que a seguridad se refiere, ya que la masiva implementación de estas redes hará que millones de Terabytes de datos, muchas veces comprometidos o sometidos a estrictas Leyes de protección de los mismos, circulen en la sociedad de la información, de forma que lo que nace como una ventaja muy interesante para sus usuarios, puede convertirse en una pesadilla debido a la amenaza constante hacia los servicios mínimos de seguridad que las compañías desarrolladoras han de garantizar a los usuarios de sus aplicaciones. Éstas, y con el objetivo de proveer un ámbito de seguridad mínimo, deben de realizar un minucioso estudio de la aplicación en particular que se quiere ofrecer con una WSN y también de las características específicas de la red ya que, al estar formadas por dispositivos prácticamente diminutos, pueden tener ciertas limitaciones en cuanto al tamaño de la batería, capacidad de procesamiento, memoria, etc. El presente proyecto desarrolla una aplicación, única, ya que en la actualidad no existe un software con similares características y que aporta un avance importante en dos campos principalmente: por un lado ayudará a los usuarios que deseen desplegar una aplicación en una red WSN a determinar de forma automática cuales son los mecanismos y servicios específicos de seguridad que se han de implementar en dicha red para esa aplicación concreta y, por otro lado proporcionará un apoyo extra a expertos de seguridad que estén investigando en la materia ya que, servirá de plataforma de pruebas para centralizar la información sobre seguridad que se tengan en ese momento en una base de conocimientos única, proporcionando también un método útil de prueba para posibles escenarios virtuales. ABSTRACT. It has been more than 20 years since the Internet appeared and with it, scientists, companies, users, etc. have been wanted to apply this technology to their environment which means to control remotely devices, which are useful for the industry or aspects of the daily life. However, the huge development of these applications oriented to that use, has not evolve till some important researches has been occurred in two fields: on one hand, the field of the Wireless Sensor Networks (WSN) which are networks composed of little devices that are able to transmit the information that they gather making it to pass through from their wireless network to other wider networks and on the other hand with the increase of the miniaturization of the devices which are able to work in autonomous mode so that to process data and connect to each other. WSN could be compromised in the matter of security as well as the conventional computer networks, due to the massive implementation of this kind of networks will cause that millions of Terabytes of data will be going around in the information society, thus what it is thought at first as an interesting advantage for people, could turn to be a nightmare because of the continuous threat to the minimal security services that developing companies must guarantee their applications users. These companies, and with the aim to provide a minimal security realm, they have to do a strict research about the application that they want to implement in one WSN and the specific characteristics of the network as they are made by tiny devices so that they could have certain limitations related to the battery, throughput, memory, etc. This project develops a unique application since, nowadays, there is not any software with similar characteristics and it will be really helpful in mainly two areas: on one side, it will help users who want to deploy an application in one WSN to determine in an automatically way, which ones security services and mechanisms are those which is necessary to implement in that network for the concrete application and, on the other side, it will provide an extra help for the security experts who are researching in wireless sensor network security so that ti will an exceptional platform in order to centralize information about security in the Wireless Sensor Networks in an exclusive knowledge base, providing at the same time a useful method to test virtual scenarios.