Evaluation of the utilization of electric vehicles for building energy management in hotels

Governments are working in new policies to slow down total energy consumption and greenhouse gases (GHG) emissions, promoting the deployment of electric vehicles (EVs) in all countries. In order to facilitate this deployment and help to reduce the final costs of their batteries, additional utilization of EVs when those are parked has been proposed. EVs can be used to minimize the total electricity cost of buildings (named vehicle to building applications, V2B). In this paper an economic evaluation of EVs in the Building Energy Management System is shown. The optimal storage capacity and its equivalent number of EVs are determined. This value is then used for determining the optimal charging schedule to be applied to the batteries. From this schedule, the total expected profit is derived for the case of a real hotel in Spain.

New method for analytical photovoltaic parameters identification: meeting manufacturer’s datasheet for different ambient conditions

At present, photovoltaic energy is one of the most important renewable energy sources. The demand for solar panels has been continuously growing, both in the industrial electric sector and in the private sector. In both cases the analysis of the solar panel efficiency is extremely important in order to maximize the energy production. In order to have a more efficient photovoltaic system, the most accurate understanding of this system is required. However, in most of the cases the only information available in this matter is reduced, the experimental testing of the photovoltaic device being out of consideration, normally for budget reasons. Several methods, normally based on an equivalent circuit model, have been developed to extract the I-V curve of a photovoltaic device from the small amount of data provided by the manufacturer. The aim of this paper is to present a fast, easy, and accurate analytical method, developed to calculate the equivalent circuit parameters of a solar panel from the only data that manufacturers usually provide. The calculated circuit accurately reproduces the solar panel behavior, that is, the I-V curve. This fact being extremely important for practical reasons such as selecting the best solar panel in the market for a particular purpose, or maximize the energy extraction with MPPT (Maximum Peak Power Tracking) methods.

Experiences and methodology in a multidisciplinary energy and architecture competition: Solar Decathlon Europe 2012

Solar Decathlon Europe is an international competition among universities which promotes interdisciplinary learning in engineering and architecture. Students from different disciplines participate in teams guided by several professors during a 29 month preparation period plus five weeks of on-site contest. The educational project involves designing, building and testing a solar energy house connected to the electrical grid with the strategy of maximizing self-consumption, supported by bioclimatic technologies and maintaining a low environmental footprint. It culminates in a on-site contest in which teams must assembly the house themselves, test it with ordinary real life tasks and finally disassembly it. The event has also a divulgative aim, trying to make students and visitors get interested in discovering the problems presented by real engineering and architecture applications. In addition, SDE covers R&D aspects in different fields such as energy efficiency, solar energy and bioclimatic architecture. This article presents the methodology followed during the SDE 2012 edition, in which more than 850 students participated. The obtained results show that the educational competition was a success according to the technical and professional ambitions of the students, most of them considering that their knowledge had increased in areas related to technical and multidisciplinary aspects.

Passive design strategies and performance of Net Energy Plus Houses

The first step in order to comply with the European Union goals of Near to Zero Energy Buildings is to reduce the energy consumption in buildings. Most of the building consumption is related to the use of active systems to maintain the interior comfort. Passive design strategies contribute to improve the interior comfort conditions, increasing the energy efficiency in buildings and reducing their energy consumption. In this work, an analysis of the passive strategies used in Net Energy Plus Houses has been made. The participating houses of the Solar Decathlon Europe 2012 competition were used as case studies. The passive design strategies of these houses were compared with the annual simulations, and the competition monitored data, especially during the Passive Monitored Period. The analysis included the thermal properties of the building envelope, geometric parameters, ratios and others passive solutions such as Thermal Energy Storage systems, evaporative cooling, night ventilation, solar gains and night sky radiation cooling. The results reflect the impact of passive design strategies on the houses' comfort and efficiency, as well as their influence in helping to achieve the Zero Energy Buildings category.

Electrical energy balance contest in Solar Decathlon Europe 2012

Solar Decathlon Europe (SDE) is an international multidisciplinary competition in which 20 universityteams build and operate energy-efficient solar-powered houses. The aim of SDE is not only scientificbut also educational and divulgative, making visitors to understand the problems presented by realengineering applications and architecture. From a research perspective, the energy data gathered dur-ing the competition constitutes a very promising information for the analysis and understanding of thephotovoltaic systems, grid structures, energy balances and energy efficiency of the set of houses. Thisarticle focuses on the electrical energy components of SDE competition, the energy performance of thehouses and the strategies and behaviors followed by the teams. The rules evaluate the houses? electricalenergy self-sufficiency by looking at the electricity autonomy in terms of aggregated electrical energybalance; the temporary generation-consumption profile pattern correlation; and the use of electricityper measurable area. Although the houses are evaluated under the same climatological and consump-tion conditions, production results are very different due to the specific engineering solutions (differentelectrical topologies, presence or absence of batteries, diverse photovoltaic module solutions, etc.)

Las construcciones subterráneas para bodegas, un modelo de ahorro de energía mediante los sistemas constructivos. Estudio de las condiciones higrotérmicas, ventilación y modelos de simulación

Esta tesis se enmarca dentro de una línea de investigación iniciada en el 2004 focalizada en el estudio de soluciones constructivas energéticamente eficientes para la crianza del vino. El objetivo principal es promover el ahorro energético y la sostenibilidad en el diseño de la sala de crianza de las bodegas. Para ello, se profundiza en el estudio de las bodegas subterráneas, ejemplo de eco-construcción, ya que por lo general proporcionan condiciones adecuadas para la crianza sin gasto energético en climatización. En concreto, se abordan aspectos clave para la caracterización y comprensión del funcionamiento de estas construcciones, que en muchas ocasiones condicionan el éxito o el fracaso de las mismas. Así, se analiza el complejo comportamiento de la ventilación natural a lo largo del año, determinando los factores que la condicionan, desvelando el papel que desempeña tanto el túnel de acceso como las chimeneas de ventilación en su funcionamiento. Además, se desarrollan y validan modelos de simulación mediante CFD, que permiten evaluar y predecir con detalle el comportamiento termofluidodinámico de las construcciones subterráneas. Por otra parte, se cuantifica la uniformidad y estabilidad de la sala de crianza a lo largo del año, información que permite fijar recomendaciones y pautas concretas de diseño de los planes de monitorización. Finalmente, se determinan las diferencias de comportamiento higrotérmico existentes entre un amplio abanico de bodegas subterráneas para vino tinto, bodegas representativas de otras soluciones constructivas alternativas de vino tinto, así como bodegas para cavas y vinos generosos, enmarcando el comportamiento de estas bodegas en un contexto global. Además, se desarrollan metodologías adaptadas a las características particulares de estas construcciones, en concreto un sistema de monitorización basado en termografía infrarroja para llevar a cabo inspecciones puntuales para el control ambiental de grandes naves de crianza. Es de esperar que los estudios técnicos y las herramientas desarrolladas ayuden a mejorar el diseño de nuevas bodegas, y a la mejora de las condiciones higrotérmicas de las ya existentes, colaborando a que España siga situada en la vanguardia de la producción de vino de calidad. ABSTRACT This thesis is part of the research started in 2004 and focusing on the study of the energy efficiency in wine aging constructive solutions. The main objective is to promote energy conservation and sustainability in the design of wine aging rooms. To do so, this study focuses on the analysis of the underground cellars, example of eco-construction, since they usually provide adequate conditions for wine aging without using air-conditioning systems. In particular, key aspects for characterizing and understanding these constructions, which often determine the success or failure of them. Thus, the complex behavior of natural ventilation throughout the year is discussed, determining the influencing factors and revealing the role of both the access tunnel and the ventilation chimney. In addition, numerical models are developed and validated using CFD simulation, allowing an in-depth assessment and prediction of the thermofluidynamic behavior in underground constructions. Moreover, uniformity and stability of the aging room throughout the year is quantified, allowing for precise information useful to set recommendations and design guidelines for defining monitoring plans. Finally, hygrothermal behavior differences between a wide range of underground cellars for red wine, red wine wineries with alternative construction solutions and wineries for generous wines and cava wines, In addition, new methodologies adapted towards the particular characteristics of these constructions, a monitoring system based on infrared thermography to perform periodic inspections for environmental controls of the aging rooms, are developed. It is expected that the technical studies and tools developed here will help to improve the design of new wineries, and also the hygrothermal conditions of the existing ones, headed for keeping Spain in the forefront of the countries producing high quality wine.

Reduced carbon and energy footprint in highway operations: the Highway Energy Assessment (HERA) methodology

Global demand for mobility is increasing and the environmental impact of transport has become an important issue in transportation network planning and decision-making, as well as in the operational management phase. Suitable methods are required to assess emissions and fuel consumption reduction strategies that seek to improve energy efficiency and furthering decarbonization. This study describes the development and application of an improved modeling framework – the HERA (Highway EneRgy Assessment) methodology – that enables to assess the energy and carbon footprint of different highways and traffic flow scenarios and their comparison. HERA incorporates an average speed consumption model adjusted with a correction factor which takes into account the road gradient. It provides a more comprehensive method for estimating the footprint of particular highway segments under specific traffic conditions. It includes the application of the methodology to the Spanish highway network to validate it. Finally, a case study shows the benefits from using this methodology and how to integrate the objective of carbon footprint reductions into highway design, operation and scenario comparison.

Fuel poverty as a determinant in energy retrofitting actions

Fuel poverty can be defined as “the inability to afford adequate warmth in the home" and it is the result of the combination of three items: low household income, housing lack of energy efficiency and high energy bills. Although it affects a growing number of households within the European Union only some countries have an official definition for it. In 2013, the European Parliament claimed the Commission and Estate Members to develop different policies in order to fight household energy vulnerability. The importance of tackling fuel poverty is based on the critical consequences it has for human health living below certain temperatures. In Spain some advances have been made in this field but main existing studies remain at the statistical level and do not deepen the understanding of the problem from the perspective of dwelling indoor habitability conditions. What is more, this concept is yet to be officially defined. This paper presents the evaluation of fuel poverty in a building block of social housing located in the centre of Zaragoza and how this issue determined the strategies implemented in the energy retrofitting intervention project. At a first step, fuel poverty was appraised through the exploration of indoor thermal conditions. The adaptive thermal comfort (UNE-EN 15251:2008) method was used to establish the appropriate indoor temperatures and consequently to determine what can be called 'comfort gap'. Results were collated and verified with energy bills collection and a survey work that gathered data from neighbours. All this permitted pointing out those households more in need. Results from the social analysis combined with the evaluation of the building thermal performance determined the intervention. The renovation project was aimed at the implementation of passive strategies that improve households thermal comfort in order to alleviate households fuel poverty situation. This research is part of the project NewSolutions4OldHousing (LIFE10 ENV/ES/439) cofounded by the European Commission under the LIFE+ Programme.

Income, energy expenditure and housing in Madrid: retrofitting policy implications

Fuel poverty can be defined as ‘the inability to afford adequate warmth in the home’ and it is the result of the combination of three factors: low household income, lack of energy efficiency and high energy bills. Within this context, the present research is aimed at characterizing, for the first time, the housing stock of fuel-poor households in the Autonomous Region of Madrid. Fuel poverty incidence was established and households were divided into six different groups according to their relative position regarding fuel and monetary poverty. The housing stock of each group is characterized and those households most in need are identified. These results enable energy retrofitting priorities to be established, focusing on the needs of the different household groups and accounting for their housing stock characteristics. This allows Spanish energy retrofitting policies to be assessed for their capability of tackling fuel poverty and makes it possible to suggest some improvements.

Energy and economic survey of the renovation of a residential building wall in Madrid

La edificación es un sector de enorme influencia en la evolución del consumo de energía y las emisiones de CO2. Teniendo en cuenta que en estos momentos hay 3,5 millones de viviendas vacías y que los próximos años no va a haber un aumento en la demanda de vivienda nueva, la rehabilitación sostenible del parque residencial existente es una tarea prioritaria y sobre la que hay que prestar especial interés. Dado que aún queda mucho donde actuar, es necesario hacer una reflexión sobre cómo se está rehabilitando para poder mejorar en el futuro. Por ello, el objetivo del presente trabajo es analizar algunas estrategias adoptadas hasta ahora en el parque inmobiliario y su aplicación en un caso de estudio, mediante la mejora de la fachada de un edificio de viviendas situado en Madrid.

Evaluación de un sistema de energía solar térmica basado en colectores de tubos de vacío para suministro de agua a alta temperatura

Esta tesis pretende contribuir al fomento y utilización de la energía solar como alternativa para la producción de agua caliente en el sector agroindustrial. La demanda de agua caliente es un aspecto clave en un gran número de agroindustrias y explotaciones agrarias. Esta demanda presenta una gran variabilidad, tanto en los horarios en que se solicita como en la temperatura del agua del depósito requerida (TADr), difiriendo del perfil de demanda habitual para uso doméstico. Existe una necesidad de profundizar en la influencia que tiene la variación de la TADr en la eficiencia y viabilidad de estos sistemas. El objetivo principal de esta tesis es caracterizar el funcionamiento de un sistema solar térmico (SST) con captador de tubos de vacío (CTV) para producir agua a temperaturas superiores a las habituales en estos sistemas. Se pretende determinar la influencia que la TADr tiene sobre la eficiencia energética del sistema, cuantificar el volumen de agua caliente que es capaz de suministrar en función de la TADr y determinar la rentabilidad del SST como sistema complementario de suministro. Para ello, se ha diseñado, instalado y puesto a punto un sistema experimental de calentamiento de agua, monitorizando su funcionamiento a diferentes TADr bajo condiciones ambientales reales. Los resultados cuantifican cómo el aumento de la TADr provoca una disminución de la energía suministrada al depósito, pudiendo superar diferencias de 1000 Wh m-2 d-1 entre 40 ºC y 80 ºC, para valores de irradiación solar próximos a 8000 Wh m-2 d-1 (la eficiencia del sistema oscila entre 73% y 56%). Esta reducción es consecuencia de la disminución de la eficiencia del captador y del aumento de las pérdidas de calor en las tuberías del circuito. En cuanto al agua suministrada, cuanto mayor es la TADr, mayor es la irradiación solar requerida para que tenga lugar la primera descarga de agua, aumentando el tiempo entre descargas y disminuyendo el número de éstas a lo largo del día. A medida que se incrementa la TADr, se produce una reducción del volumen de agua suministrado a la TADr, por factores como la pérdida de eficiencia del captador, las pérdidas en las tuberías, la energía acumulada en el agua que no alcanza la TADr y la mayor energía extraída del sistema en el agua producida. Para una TADr de 80 ºC, una parte importante de la energía permanece acumulada en el depósito sin alcanzar la TADr al final del día. Para aprovechar esta energía sería necesario disponer de un sistema complementario de suministro, ya que las pérdidas de calor nocturnas en el depósito pueden reducir considerablemente la energía útil disponible al día siguiente. La utilización del sistema solar como sistema único de suministro es inviable en la mayoría de los casos, especialmente a TADr elevadas, al no ajustarse la demanda de agua caliente a la estacionalidad de la producción del sistema solar, y al existir muchos días sin producción de agua caliente por la ausencia de irradiación mínima. Por el contrario, la inversión del sistema solar como sistema complementario para suministrar parte de la demanda térmica de una instalación es altamente recomendable. La energía útil anual del sistema solar estimada oscila entre 1322 kWh m-2 y 1084 kWh m-2. La mayor rentabilidad se obtendría suponiendo la existencia de una caldera eléctrica, donde la inversión se recuperaría en pocos años -entre 5.7 años a 40 ºC y 7.2 años a 80 ºC -. La rentabilidad también es elevada suponiendo la existencia de una caldera de gasóleo, con periodos de recuperación inferiores a 10 años. En una industria ficticia con demanda de 100 kWh d-1 y caldera de gasóleo existente, la inversión en una instalación solar optimizada sería rentable a cualquier TADr, con valores de VAN cercanos a la inversión realizada -12000 € a 80 ºC y 15000€ a 40 ºC- y un plazo de recuperación de la inversión entre 8 y 10 años. Los resultados de este estudio pueden ser de gran utilidad a la hora de determinar la viabilidad de utilización de sistemas similares para suministrar la demanda de agua caliente de agroindustrias y explotaciones agropecuarias, o para otras aplicaciones en las que se demande agua a temperaturas distintas de la habitual en uso doméstico (60 ºC). En cada caso, los rendimientos y la rentabilidad vendrán determinados por la irradiación de la zona, la temperatura del agua requerida y la curva de demanda de los procesos específicos. ABSTRACT The aim of this thesis is to contribute to the development and use of solar energy as an alternative for producing hot water in the agribusiness sector. Hot water supply is a key issue for a great many agribusinesses and agricultural holdings. Both hot water demand times and required tank water temperature (rTWT) are highly variable, where the demand profile tends to differ from domestic use. Further research is needed on how differences in rTWT influence the performance and feasibility of these systems. The main objective of this thesis is to characterize the performance and test the feasibility of an evacuated tube collector (ETC) solar water heating (SWH) system providing water at a higher temperature than is usual for such systems. The aim is to determine what influence the rTWT has on the system’s energy efficiency, quantify the volume of hot water that the system is capable of supplying at the respective rTWT and establish whether SWH is feasible as a booster supply system for the different analysed rTWTs. To do this, a prototype water heating system has been designed, installed and commissioned and its performance monitored at different rTWTs under real operating conditions. The quantitative results show that a higher rTWT results in a lower energy supply to the tank, where the differences may be greater than 1000 Wh m-2 d-1 from 40 ºC to 80 ºC for insolation values of around 8000 Wh m-2 d-1 (system efficiency ranges from 73% to 56%). The drop in supply is due to lower collector efficiency and greater heat losses from the pipe system. As regards water supplied at the rTWT, the insolation required for the first withdrawal of water to take place is greater at higher rTWTs, where the time between withdrawals increases and the number of withdrawals decreases throughout the day. As rTWT increases, the volume of water supplied at the rTWT decreases due to factors such as lower collector efficiency, pipe system heat losses, energy stored in the water at below the rTWT and more energy being extracted from the system by water heating. For a rTWT of 80 ºC, much of the energy is stored in the tank at below the rTWT at the end of the day. A booster supply system would be required to take advantage of this energy, as overnight tank heat losses may significantly reduce the usable energy available on the following day. It is often not feasible to use the solar system as a single supply system, especially at high rTWTs, as, unlike the supply from the solar heating system which does not produce hot water on many days of the year because insolation is below the required minimum, hot water demand is not seasonal. On the other hand, investment in a solar system as a booster system to meet part of a plant’s heat energy demand is highly recommended. The solar system’s estimated annual usable energy ranges from 1322 kWh m-2 to 1084 kWh m-2. Cost efficiency would be greatest if there were an existing electric boiler, where the payback period would be just a few years —from 5.7 years at 40 ºC to 7.2 years at 80 ºC—. Cost efficiency is also high if there is an existing diesel boiler with payback periods of under 10 years. In a fictitious industry with a demand of 100 kWh day-1 and an existing diesel boiler, the investment in the solar plant would be highly recommended at any rTWT, with a net present value similar to investment costs —12000 € at 80 ºC and 15000 € at 40 ºC— and a payback period of 10 years. The results of this study are potentially very useful for determining the feasibility of using similar systems for meeting the hot water demand of agribusinesses and arable and livestock farms or for other applications demanding water at temperatures not typical of domestic demand (60ºC). Performance and cost efficiency will be determined by the regional insolation, the required water temperature and the demand curve of the specific processes in each case.

Análisis de viabilidad e implantación de sistemas de cogeneración en el sector residencial

En la actualidad la generación y utilización eficientes de la energía es el vector principal que permite el desarrollo sostenible en el marco ambiental, económico, seguro y rentable. Todo ello genera una necesidad en el ser humano de guiar a los avances tecnológicos hacia una manera cada vez más eficiente de generar nuestras necesidades básicas, como es el caso de la energía. La cogeneración ha sido uno de los resultados positivos en la búsqueda de la eficiencia energética, debido a tratarse de un sistema de producción simultánea de calor y electricidad partiendo inicialmente de un combustible como energía primaria. Es por ello, que en el presente proyecto se estudia, analiza y propone la posibilidad de implantar sistemas de cogeneración en el sector residencial, un sector que podría beneficiarse enormemente de los beneficios que ofrecen dichos sistemas. En una primera parte se analiza la tecnología de cogeneración y sus variantes, como son, la microcogeneración y la trigeneración. También se muestra la evolución legislativa que han sufrido estos sistemas. En una segunda parte se ha tomado un caso modelo, un edificio de 72 viviendas con sistema de calderas centralizado convencional, y se ha estudiado la posibilidad de implantar un sistema de cogeneración. Para ello se han calculado previamente las demandas energéticas del edificio y se han ido proponiendo diferentes modos de operación para cubrir dichas demandas por medio de sistemas de microcogeneración o cogeneración. Finalmente, una vez valoradas las opciones se muestra la elegida y se efectúa un análisis económico ABSTRACT Nowadays the efficient generation of energy is the main vector that allows sustainable development in environmental, economic, safety and cost effectiveness. All this generates a need in humans to lead to new technological advances towards an even more efficient way to generate our basic needs, such as energy. Cogeneration has been one of the positive results in the search for energy efficiency, due to the fact that it is a system of simultaneous production of heat and electricity initially starting from a primary energy fuel. It is for this reason that this project studies, analyzes and proposes the possibility of introducing cogeneration systems in the residential sector, a sector that could benefit greatly from the benefits offered by these systems. In the first part, cogeneration technology and its variants are analyzed, like, micro-cogeneration and trigeneration. The legislative evolutions that have suffered these systems are also displayed. In a second part, a model case has been taken; a building of 72 flats with conventional centralized boiler system, the possibility of introducing a cogeneration system has been studied. Previously the energy demands of the building have been calculated proposing different operating modes to meet those demands through micro-CHP or cogeneration systems. Finally, once the options are valued the chosen one is shown and an economic analysis is performed.

Certificación energética mediante la herramienta CE3X y rehabilitación energética de una vivienda unifamiliar

El siguiente proyecto lleva a cabo un estudio sobre la eficiencia energética en una vivienda unifamiliar basándose en la legislación actual europea y española. Para empezar se obtendrá la calificación energética del inmueble mediante el programa informático de la opción simplificada CE3X. A continuación se proporcionará un estudio con las medidas de mejora más adecuadas para mejorar la eficiencia energética de la vivienda, las medidas que se llevarán a cabo serán: la mejora de la envolvente térmica, mejorando el aislamiento de la fachada y la sustitución de ventanas, la instalación de una caldera de biomasa y la instalación de un sistema de colectores solares para cubrir la demanda de calefacción y ACS. Para finalizar se realiza un presupuesto de las medidas de mejoras propuestas, así como un análisis económico y una planificación y programación temporal. ABSTRACT The object of this Project is to carry out a study on the energy efficiency of a single family home in accordance with the present European and Spanish legislation. The first step is to obtain the home energy efficiency by means of a CE3X computer program. The second step is a study with the most appropriate improvement measures is provided in order to improve the home energy efficiency. The measures to be carried out will be as follows: improving the heat insulation, as well as, the facade heat insulation and replacing the windows, installing a biomass heating system and a solar collector in order to satisfy the heating and domestic hot water (DHW) demands. Finally a budget with the proposed improvement measures is made as well as a financial analysis and a time planning and programming of the project.

Evaluación de la sostenibilidad de sistemas de construcción industrializados de fachada en edificios de vivienda colectiva

Esta tesis parte de una reflexión sobre la integración de la construcción industrializada en la arquitectura y el desarrollo sostenible de nuestro planeta y, más concretamente, de la inquietud de querer comparar los diferentes sistemas de construcción industrializados bajo el punto de vista de su sostenibilidad. Supone una introspección en la industrialización sostenible de la construcción en cuanto a la conservación de energía y los recursos naturales, la reutilización de estos recursos y la gestión del ciclo de vida de los materiales y componentes utilizados. Las consideraciones se refieren tanto a aspectos concernientes a los materiales empleados, como a las tecnologías utilizadas, gestión de los edificios y su disposición final, para obtener una mayor eficiencia energética de los edificios y las técnicas de construcción. El estudio se concreta en el desarrollo un marco teórico para la investigación de la sostenibilidad de los sistemas industrializados de fachadas en edificios de vivienda colectiva en España; desarrollando una herramienta que permite, por un lado, guiar a los diferentes agentes en el diseño de sistemas constructivos de fachada con las mejores prácticas de sostenibilidad y, por otro lado, evaluar la sostenibilidad de los sistemas constructivos de una forma objetiva. Por último, se lleva a cabo la evaluación y comparación de once ejemplos de sistemas de fachadas realizados en España en los últimos años. Esto ha permitido emitir juicios críticos soportados por una base fáctica sobre el grado de sostenibilidad de unos sistemas con respecto a otros, realizando un análisis del estado actual del sector de la construcción de fachadas en vivienda colectiva en España, concluyendo en unas directrices que permitan mejorar los sistemas existentes. ABSTRACT The starting point of this thesis is a reflection on the integration of industrialized building and sustainable development concepts. This integration is specifically focused on providing a framework for comparing different systems of industrialized components used in the construction of collective housing, from the point of view of sustainability. Consequently, it involves research on the sustainable industrialization of construction in regards to energy conservation and natural resources, reuse of these resources and life cycle management of materials and components. These considerations refer to both the aspects concerning the materials used, and to the technologies applied to achieve greater energy efficiency in buildings and construction techniques. In tune with this, this thesis puts forward a theoretical framework for the research of sustainability of industrialized façade systems used in collective housing in Spain, leading to the development of a tool for design and assessment that can potentially be applied to any system. This analytical framework is then used to evaluate ten examples of façade systems made in Spain in recent years, therefore providing a factual basis to comparatively determine the degree of sustainability of existing solutions. Moreover, the implementation of this tool also allows to analyse the current state of the sector of façade construction for collective housing in Spain, as well as to propose several guidelines for the improvement of existing systems.

Sistema para el análisis del consumo eléctrico y optimización en la contratación del suministro

El presente trabajo se enmarca en el ámbito de la eficiencia energética y contempla la gestión del consumo eléctrico en hogares. Concretamente, para este proyecto fin de grado se propone el desarrollo de un sistema informático que permita el análisis y monitorización del consumo eléctrico y optimización en la contratación del suministro eléctrico en el hogar. El sistema desarrollado permite la monitorización del consumo eléctrico, expresado en kilovatios-hora (kWh), y la monitorización del coste real de dicho consumo, expresado en euros, en función del tipo de tarifa que se tenga contratada en la modalidad del PVPC1 (Precio Voluntario para el Pequeño Consumidor). También se ha desarrollado una interfaz web a través de la cual el usuario tiene acceso a la información y datos del sistema. En dicha web se muestran gráficas de consumo, potencia, voltaje, corriente y coste de la energía por días. Además, se ha dotado al sistema de un generador de alertas que notifica al usuario, vía web y vía correo electrónico, cuando el consumo sobrepasa los límites fijados por él mismo. El usuario, por tanto, podrá definir los valores de alerta de sobreconsumo y visualizar tanto un histórico de las alertas generadas en el pasado como las alertas activas en ese momento. Las alertas se muestran en la gráfica correspondiente dentro de la aplicación web. Por último, se dispone de la opción de exportar las gráficas que son visualizadas en la aplicación web en formato PNG, JPEG, PDF y SVG, además de la posibilidad de imprimirla.---ABSTRACT---This project belongs to the Energy Efficiency field and is aimed at home energy management. Specifically, for this thesis the development of a computer system that allows monitoring and analysis of energy consumption and contracted power optimization is proposed. The developed system allows energy consumption management within households (expressed in kilowatts per hour, kWh) and real cost monitoring (in euros) according to the contract tariff. A web interface has been developed in order to provide the user with power consumption information and control energy tools. In this web application, electric consumption, power, voltage, current and energy cost by day are shown. Besides, an alert generation system has been implemented so that the user can define maximum power consumption values and be informed through email or web when these values are exceeded. The user will be able to check older power alerts as well as the currently active ones. These alerts are shown in a specific graph within the web application. Finally, the user generated graphs can be exported from the web using PNG, JPEG, PDF or SVG image formats as well as be printed from the web.