Failure mechanism of reinforced concrete structural walls with and without confinement

This paper presents the results of cyclic loading tests on two large-scale reinforced concrete structural walls that were conducted at Purdue University. One of the walls had confinement reinforcement meeting ACI-318-11 requirements while the other wall did not have any confinement reinforcement. The walls were tested as part of a larger study aimed at indentifying parameters affecting failure modes observed to limit the drift capacity of structural walls in Chile during the Maule Earthquake of 2010. These failure modes include out-of-plane buckling (of the wall rather tan individual reinforcing bars), compression failure, and bond failure. This paper discusses the effects of confinement on failure mode. Distributions of unit strain and curvature obtained with a dense array of non-contact coordinate-tracking targets are also presented.

Design energy spectra for Turkey

This work proposes design energy spectra in terms of velocity, derived through linear dynamic analyses on Turkish registers and intended for regions with design peak acceleration 0.3 g or higher. In the long and mid period ranges the analyses are linear, taking profit of the rather insensitivity of the spectra to the structural parameters other than the fundamental period; in the short period range, the spectra are more sensitive to the structural parameters and nonlinear analyses would be required. The selected records are classified in eight groups according to the design input acceleration, the soil type, the earthquake magnitude and the near-source effects. For each of these groups, median and characteristic spectra are proposed (50% and 95% percentiles). These spectra have an initial linear growing branch in the short period range, a horizontal branch in the mid period range and a descending branch in the long period range.

A shake table test of typical mediterranean reinforced concrete structures

This research investigates the ultimate earthquake resistance of typical RC moment resisting frames designed accordingly to current standards, in terms of ultimate energy absorption/dissipation capacity. Shake table test of a 2/5 scale model, under several intensities of ground motion, are carried out. The loading effect of the earthquake is expressed as the total energy that the quake inputs to the structure, and the seismic resistance is interpreted as the amount of energy that the structure dissipates in terms of cumulative inelastic strain energy.

On soil-structure interaction in large non-slender partially buried structures

This paper addresses the seismic analysis of a deeply embedded non-slender structure hosting the pumping unit of a reservoir. The dynamic response in this type of problems is usually studied under the assumption of a perfectly rigid structure using a sub-structuring procedure (three-step solution) proposed specifically for this hypothesis. Such an approach enables a relatively simple assessment of the importance of some key factors influencing the structural response. In this work, the problem is also solved in a single step using a direct approach in which the structure and surrounding soil are modelled as a coupled system with its actual geometry and flexibility. Results indicate that, quite surprisingly, there are significant differences among prediction using both methods. Furthermore, neglecting the flexibility of the structure leads to a significant underestimation of the spectral accelerations at certain points of the structure.

Shaking table tests of a RC frame structure equipped with hysteretic dampers

This paper provides partial results of an on-going research aimed at investigating the seismic response of reinforced concrete (RC) frames equipped with hysteretic-type energy dissipating devices (EDD). From a prototype RC frame structure designed only for gravity loads, a test model scaled in geometry to 2/5 was defined and built in the Laboratory of Structures of the University of Granada. Four EDDs were installed in the test model to provide the same seismic resistance than a conventional RC bare frame designed for sustain gravity and seismic loads following current codes. The test model with EDDs was subjected to several seismic simulations with the shaking table of Laboratory of structures of the University of Granada. The test results provide empirical evidences on the efficiency of the EDDs to prevent damage on the main frame and concentrating the inelastic deformations on the EDDs.

A simplified model for evaluation of fatigue damage in frames

Many studies have been developed to analyze the structural seismic behavior through the damage index concept. The evaluation of this index has been employed to quantify the safety of new and existing structures and, also, to establish a framework for seismic retrofitting decision making of structures. Most proposed models are based in a posterthquake evaluation in such a way they uncouple the structural response from the damage evaluation. In this paper, a generalization of the model by Flórez-López (1995) is proposed. The formulation employs irreversible thermodynamics and internal state variable theory applied to the study of beams and frames and it allows and explicit coupling between the degradation and the structural mechanical behavior. A damage index es defined in order to model elastoplasticity coupled with damage and fatigue damage.

Vulnerabilidad sísmica en Puerto Príncipe, Haití. Escala Macrosísmica Haitiana.

Haití, es un país claramente prioritario como receptor de cooperación para el desarrollo. Tras el terremoto del 12 de enero de 2010, se ha desarrollado un Proyecto de Cooperación Interuniversitaria entre la Universidad del Estado de Haití y la Universidad Politécnica de Madrid, financiado por la Agencia Española de Cooperación Internacional para el Desarrollo.El proyecto consiste en la formación y capacitación de los técnicos Haitianos para reconstruir su país. Se está trabajando en la creación de una escala macrosísmica Haitiana, partiendo como base de la Escala Macrosísmica Europea 1998. En este sentido, se hace un análisis exhaustivo de toda la documentación técnica y científica existente hasta la fecha sobre tipos de edificios, clases de vulnerabilidad y grados de daños dependiendo del tipo de edificio. Como caso de estudio se aplica en la ciudad de Puerto Príncipe.En primer lugar se ha clasificado el parque inmobiliario de Puerto Príncipe en diferentes tipologías constructivas, tras un trabajo de campo y teniendo en cuenta las guías de auto-construcción y reparación de edificios publicadas por el Ministerio de Obras Públicas, Transporte y Comunicaciones de Haití. (MTPTC).En el estudio de la vulnerabilidad, además del tipo de estructura de los edificios, se tiene en cuenta la habitabilidad básica que debe tener todo asentamiento humano, analizando no sólo el edificio, sino todo el entorno externo de espacios públicos, infraestructuras, dotaciones y servicios que, en conjunto,conforman el núcleo de cada población y permiten el funcionamiento eficiente del sistema de asentamientos del territorio habitado; pues, en última instancia, dicho territorio construido es el que mejor acota los riesgos ante la vulnerabilidad material y más garantiza la vida saludable de las personas. Los parámetros estudiados son: urbanísticos (anchos de vías, dimensiones de manzanas, trazado, infraestructuras,...), geológicos (estudios del efecto local e identificación de las fallas activas respecto a la edificación) y topográficos (implantación del edificio en zonas llanas, en laderas...). En último lugar, con todos estos datos y los daños registrados en el terremoto de enero de 2010, se hace una escala de intensidades macrosísmica y un plano de ordenación de la vulnerabilidad en Puerto Príncipe, que sirva de base a las autoridades haitianas para la planificación urbanística y la reconstrucción, mitigando de esta manera el riesgo símico. SUMMARY Haiti is a clear priority country as a recipient of development cooperation. After the earthquake of January 12, 2010, an Inter-University Cooperation Project has been developed between the State University of Haiti and the Polytechnic University of Madrid, funded by the Spanish Agency for International Development.The project consists of training and qualifying Haitian technicians to rebuild their country. We are currently working on the creation of a Haitian Macroseismic Scale,based on the European Macroseismic Scale 1998.For the accomplishment of this goal, a comprehensive (deep) analysis is being held, going through all the scientific and technical documentation to date, related to building types, kinds of vulnerability and degrees/ levels of damage depending on the type of building. As a case study, this has been applied to the city of Port-au-Prince.First of all, we have classified the housing typology of Port-au-Prince in different construction types, after carrying on field work in this area and keeping in mind the guidelines for self-construction and repairment of buildings published by the Ministry of Work, Transport and Communications of Haiti. (MTPTC).Regarding the study of vulnerability, besides the type of structure of the buildings, we take into account the basic habitability every human settlement should have, analyzing not only the building, but all the external environment of public spaces,infrastructures, amenities and services, which, as a whole, shape the core of each population and allow the efficient functioning of the settlement system on the inhabited territory. It is this territory,ultimately, the one that better narrows the risks when facing material vulnerability and that better ensures a healthy life for people. The studied parameters are: urban (lane width, block dimensions, layout, infrastructure...), geological (studies focusing on local effects and identification of the active faults in relation to the building) and topographical (implementation of the building on flat areas, slopes...)Finally, with all this data (information) and the registered damages related to the earthquake occurred in 2010, we create a Macroseismic Intensity Scale and a Management Plan of the vulnerability in Port-au-Prince. They will serve as a guideline for Haitians authorities in the urban planning and reconstruction, thus reducing seismic risk.

Seismic Activity Rates in the Iberian Peninsula

Evaluating the seismic hazard requires establishing a distribution of the seismic activity rate, irrespective of the methodology used in the evaluation. In practice, how that activity rate is established tends to be the main difference between the various evaluation methods. The traditional procedure relies on a seismogenic zonation and the Gutenberg-Richter (GR) hypothesis. Competing zonations are often compared looking only at the geometry of the zones, but the resulting activity rate is affected by both geometry and the values assigned to the GR parameters. Contour plots can be used for conducting more meaningful comparisons, providing the GR parameters are suitably normalised. More recent approaches for establishing the seismic activity rate forego the use of zones and GR statistics and special attention is paid here to such procedures. The paper presents comparisons between the local activity rates that result for the complete Iberian Peninsula using kernel estimators as well as two seismogenic zonations. It is concluded that the smooth variation of the seismic activity rate produced by zoneless methods is more realistic than the stepwise changes associated with zoned approaches; moreover, the choice of zonation often has a stronger influence on the results than its fairly subjective origin would warrant. It is also observed that the activity rate derived from the kernel approach, related with the GR parameter “a”, is qualitatively consistent with the epicentres in the catalogue. Finally, when comparing alternative zonations it is not just their geometry but the distribution of activity rate that should be compared.

La modernidad arquitectónica en México : una mirada a través del arte y los medios impresos

Esta tesis se basa en la hipótesis de que la modernidad arquitectónica en México no es, como se ha pretendido, una historia homogénea, centrada en un puñado de figuras clave, sino una multiplicidad de narrativas complejas en las cuales el arte y los medios impresos juegan un papel esencial. Por tanto, se propone una nueva mirada sobre la arquitectura del siglo XX en México a partir de la relación con la fotografía, el dibujo, las ideas y los medios. La tesis se plantea con el fin de vincular la arquitectura con los movimientos artísticos relevantes, los autores con las publicaciones, las formas con los manifiestos. Asímismo, uno de los principales intereses es explorar los conceptos de modernidad y de identidad, como parte de la construcción misma de la arquitectura de dicha época y del concepto de “lo mexicano”. A pesar del énfasis que se ha dado en la construcción de un canon, muchas veces ligado a la noción de monumentalidad, regionalismo, y mestizaje, este trabajo parte de una mirada puesta no en las formas sino en los procesos. A partir de las conexiones entre distintas capas de información, se buscan nuevas maneras de abordar el proyecto arquitectónico. El crítico de arquitectura brasileño Hugo Segawa ha descrito la investigación sobre la arquitectura latinoamericana como “una tarea más de índole arqueológica que historiográfica”, sin embargo, también ha calificado a México como “el más vigoroso centro de debates teóricos en Latinoamérica a lo largo del siglo XX.” Ese descompas entre la ruina y el vigor, entre la abundancia de producción y la precariedad de su conservación, ha definido no solo el estudio de la arquitectura sino las propias formas de creación. Por tanto, la tesis se plantea como una nueva plataforma desde la cual sea posible reformular la arquitectura, lejos de su condición amnésica, pensada en cambio, como un sistema basado en una misma voluntad por indagar y crear. Se busca, siguiendo al crítico británico Anthony Vidler, “relacionar” la historia con el proyecto. Con el fin de quitarle lo escurridizo a una historia incompleta y sobre todo de poder entender la manera en que las ideas se convierten en forma o en objeto, la tesis se estructura a partir de 22 líneas de tiempo organizadas en tres recorridos que se cruzan: arquitectura; arte y pensamiento. A partir de referencias como el Atlas Mnemosyne de Aby Wargurg o la serie Asterisms del artista Gabriel Orozco, se crean nuevos dispositivos para ver. De tal manera, se desdoblan los distintos temas para trazar relaciones entre la ciudad, los edificios, las utopías, las publicaciones y la publicidad. El trabajo se construye como un nuevo instrumento de exploración articulado por medio de capas, como un mapa genealógico evolutivo. El objetivo es abarcar aquella arquitectura construida no sólo en la ciudad sino también en el papel. Iniciando con el trabajo de la generación que llevó la arquitectura al siglo XX, el estudio se extiende a manera de epílogo hasta la primera década del siglo XXI, reuniendo obras que normalmente se han visto de manera aislada para entenderlas en su contexto más amplio. Como escenario de búsquedas, esta tesis intenta provocar el cruce de significados, creyendo imprescindible una nueva reflexión en torno a la disciplina y a los escenarios en los cuales se inscribe. La arquitectura de México –un país que en el siglo XX pasó de tener 13 millones de habitantes a 100 millonescorresponde esencialmente a una producción anónima, o bien, fabricada a partir de estereotipos. Pero entre la mancha de desarrollo informal y el hito reconocible está un trabajo tan amplio como inexplorado. Por tanto, se ofrece una serie de nuevas constelaciones que comprenden desde la Revolución de 1910 a los Juegos Olímpicos de 1968; del terremoto de la ciudad de México en 1985 a los concursos internacionales de las últimas décadas. This thesis’ hypothesis states that architectural modernity in Mexico is not, as sometimes pretended, a homogeneous history, focused on some key figures, but rather a multiple and complex narrative, in which art and print media have played an essential role. Therefore, it proposes a new perspective on 20th century architecture in Mexico analized through the relationship between architecture and photography, art, theory and media. Its aim is to link architecture and artistic movements, authors and publications, forms and manifestos. What is intended here is to explore the concepts of ‘modernity’ and ‘identity’ as part of the construction of architecture and the concept of ‘Mexicanity’. Despite the emphasis that has been given to the construction of an architectural canon —mostly related to the notions of monumentality, regionalism and mestizaje/métissage— this thesis’ approach is focused mainly in processes and not in forms. Through connections between diverse layers of information, new ways of dealing with the architectural project are explored. Brazilian architecture critic Hugo Segawa has described the research on Latin American architecture as «more a task of archaeology than of historiography». Nonetheless, he has also described Mexico as «the most vigorous center of theoretical debates in Latin America throughout the 20th century». This acute discrepancy between decay and vigor, between abundance of production and precarious state of conservation has determined not only the ways in which architecture is studied and understood but also the process of architectural creation. This work is therefore outlined as a new platform in order to reformulate the discipline as a system based on a common will to research and create, far from the existing amnesiac attitude. Following British critic Anthony Vidler, the interest relies in the attempt to ‘relate’ History to project. In order to reduce the elusiveness of an incomplete history and, specially, to understand how ideas become forms and objects, this thesis is composed of 22 timelines organized in three intersecting itineraries: Architecture, Art and Theory. Drawing inspiration from Aby Warburg’s Atlas Mnemosyne and Gabriel Orozco’s series Asterisms, new exploration devices are created. In such a way, diverse topics unfold to draw connections between built environment, utopian projects, publications, photography and publicity. This work is developed as a new tool for exploration, articulated by layers, like an evolutionary genealogy map. Its objective is to analyze not only the architecture build in cities, but produced on paper. Starting with the work of the generation that led Mexican architecture into the 20th century, this research extends until the first decade of the 21st century (the epilogue), gathering together works which have been usually seen in isolation, and therefore making possible its understanding in a broader context. As a scenario for exploration, this work tries to prompt the crossing of meanings, in the belief that new approaches on the discipline and its context are needed. Architecture in Mexico — a country whose population grew in the 20th century form 13 to 100 million— is related essentially with an anonymous production, or else made from stereotypes. However, between the sprawl of informal urban developments and landmark buildings there is an architectural production as extensive as it is unexamined. This essay introduces a series of new constellations, ranging from the Revolution in 1910 to the Olympic Games in 1968; from the earthquake in Mexico City in 1985 to the international competitions of the last decade. These myriad perspectives present buildings that were never built, forgotten writings, iconic images and unpublished material.

Seismic Risk Scenarios in Puerto Principe (Haiti). A Tool for Reconstruction and Emergency Planning

The 12 January 2010, an earthquake hit the city of Port-au-Prince, capital of Haiti. The earthquake reached a magnitude Mw 7.0 and the epicenter was located near the town of Léogâne, approximately 25 km west of the capital. The earthquake occurred in the boundary region separating the Caribbean plate and the North American plate. This plate boundary is dominated by left-lateral strike slip motion and compression, and accommodates about 20 mm/y slip, with the Caribbean plate moving eastward with respect to the North American plate (DeMets et al., 2000). Initially the location and focal mechanism of the earthquake seemed to involve straightforward accommodation of oblique relative motion between the Caribbean and North American plates along the Enriquillo-Plantain Garden fault system (EPGFZ), however Hayes et al., (2010) combined seismological observations, geologic field data and space geodetic measurements to show that, instead, the rupture process involved slip on multiple faults. Besides, the authors showed that remaining shallow shear strain will be released in future surface-rupturing earthquakes on the EPGFZ. In December 2010, a Spanish cooperation project financed by the Politechnical University of Madrid started with a clear objective: Evaluation of seismic hazard and risk in Haiti and its application to the seismic design, urban planning, emergency and resource management. One of the tasks of the project was devoted to vulnerability assessment of the current building stock and the estimation of seismic risk scenarios. The study was carried out by following the capacity spectrum method as implemented in the software SELENA (Molina et al., 2010). The method requires a detailed classification of the building stock in predominant building typologies (according to the materials in the structure and walls, number of stories and age of construction) and the use of the building (residential, commercial, etc.). Later, the knowledge of the soil characteristics of the city and the simulation of a scenario earthquake will provide the seismic risk scenarios (damaged buildings). The initial results of the study show that one of the highest sources of uncertainties comes from the difficulty of achieving a precise building typologies classification due to the craft construction without any regulations. Also it is observed that although the occurrence of big earthquakes usually helps to decrease the vulnerability of the cities due to the collapse of low quality buildings and the reconstruction of seismically designed buildings, in the case of Port-au-Prince the seismic risk in most of the districts remains high, showing very vulnerable areas. Therefore the local authorities have to drive their efforts towards the quality control of the new buildings, the reinforcement of the existing building stock, the establishment of seismic normatives and the development of emergency planning also through the education of the population.

Mapa preliminar de períodos predominantes del suelo en Puerto Príncipe (Haití) a partir de medidas de ruido ambiental.

The 2010 Haiti earthquake, occurred on January 12th at 16:53:09 local time (21:53:09 UTC) with epicentral distance of 15 km from the capital Port au Prince, MW 7.0 and 13 km hypocenter deep, was the strongest event in the area since happened in 1770. The maximum macroseismic intensity was estimated as X (MMI scale). The aim of this research is to obtain a preliminary zonation of Port-au-Prince in terms of predominant resonance periods of ground. A total of 36 short-period ambient noise records have been carried out on a grid of about 500x500m. H/V spectral ratio method (HVSR) has been applied to determine the predominant period at each point. The lowest values (<0.2s) predominate in the southern part of the city, composed by Miocene conglomerates, while highest values (> 0.45s) correspond to the center and western parts, composed of Pleistocene-Holocene alluvial deposits and anthropogenic land reclaimed from the sea. We have determined the ground VS30 structure inside National Palace garden, using simultaneous ambient noise measurements. An array made up of 6 sensors were used, with 5 of them uniformly distributed along a circumference and a sixth one placed in its centre. The records were analyzed by using the spatial autocorrelation method (SPAC). The VS 30 value obtained was 331m/sec, in good agreement with the average values obtained for this area by other authors, using prospecting techniques.

Simplified Procedure for the Nonlinear Seismic Analysis of Bridges

The severe accidents suffered by bridges during recent earthquake show that more careful analysis are needed to guarantee their behaviour. In particular simplified non-linear analysis could be useful to bridge the gap between theoretical research and practical applications. This paper presents one of those simplified methods that can be applied for first designs or to retrofitting of groups of bridges.

Simulación de registros sísmicos a partir de espectros de diseño

La simulación de registros sísmicos, compatibles con espectros medios de diseño, se ha convertido en una necesidad en los últimos años, debido principalmente a su exigencia en la norma de regulación del cálculo de centrales nucleares. En este trabajo se presentan distintas posibilidades de realización de esta simulación, así como una comparación entre ellas, apareciendo como una alternativa efectiva a los métodos clásicos la utilización del contenido de fase de los seismos reales. Mediante ello se establece un procedimiento que elimina la arbitrariedad que supone el uso de una función envolvente para definir la característica no estacionaria del registro. Los distintos métodos son descritos detalladamente, así como la influencia de los diferentes parámetros que intervienen en cada uno de ellos. Por último se presentan algunos ejemplos numéricos = The simulation of spectrum-compatible earthquake time histories, has been a need since the beginning of the development of earthquake engineering for complicated structures. More than the safety of the main structure, the analysis of the equipment (piping, rackes, etc.) can be assesed only on the basis of time-histories of the floor in which they are contained. This paper presents several alternatives to the generation of sinthetic time histories and the use of the distribution of the differences among the phase-angles is demonstrated to be a useful tool to simulate the nonstationarity of the process. Thorugh the paper an extensive use is made of the F.F.T. algorithm.

Estudio probabilista del daño por choque según la metodología PEER. Aplicación a un paso superior sísmicamente aislado

En países de sismicidad moderada es habitual el uso de puentes cuyo tablero está unido mediante apoyos elastoméricos y/o deslizantes, tanto a las pilas como a los estribos. La principal vulnerabilidad sísmica de estos puentes está asociada a los choques. Dicha vulnerabilidad puede valorarse estimando la probabilidad de que se produzca un determinado daño en un periodo de tiempo. En este artículo se plantean las líneas actuales para estudiar este problema, y se aplican al estudio de la vulnerabilidad de un paso superior situado en la provincia de Granada, que puede considerarse como sísmicamente aislado. El marco del estudio es la metodología del Pacific Earthquake Engineering Research Center, cuya aplicación se ha adaptado al caso estudiado. En el artículo se describen cada una de las etapas de que consta, aunque se presta especial atención a la identificación y caracterización de los daños susceptibles de producirse. El modelo de la estructura, que debe permitir una adecuada caracterización de los choques, también será presentado en detalle. Dado que el puente es representativo de una gran cantidad de estructuras del inventario construido en España, los resultados son doblemente importantes. Por una parte, sirven de guía para la aplicación de esta metodología a estructuras similares. Y por otra, proporcionan valores de probabilidades que pueden servir de referencia.

Elastodynamics

In this chapter some applications of boundary element techniques to dynamic problems are presented. First, the basic theory is briefly reviewed in order to provide the necessary background to interpret the numerical results (for a fuller account of elastodynamic theory we recommend a study of the specialized literature). The second part of the chapter is devoted to the numerical implementation of the BEM. The presentation is based on the steady-state solution because this is the area in which most experience exists. This is by no means a limitation of the BEM method, and the use of integral transformations to obtain transient solutions is a well established procedure. Finally, in the third part three examples are presented. The first example is the steady-state solution of a plate under cyclic forces with and without a crack. The second example relies on the determination of soil compliances necessary to study soil-structure interaction and the third example treats the problem of the influence of different incidence angles of incoming waves in foundations. The last two examples are relevant to earthquake engineering problems for which the BEM is very well suited.