Las tobas cuaternarias del río Añamaza (provincia de Soria, Cordillera Ibérica): aproximación cronológica

High-gradient, stepped fluvial tufa systems with dammed areas existed in the River Añamaza valley (NW Iberian Ranges, Spain) during Quaternary times. Single deposits range from a few meters to about 70 m thick, in which prograding-aggrading wedges separated by erosional surfaces exist. Several episodes of tufa formation have been distinguished by means of U-series, Amino-acid racemization and radiocarbon techniques. These correlate to MIS 8, 7, 5 and 1. The presence of MIS 9 is uncertain, as chronological data may also correspond to older stages. Most tufas in this area formed in MIS 5. Distinct tufa episodes can also be distinguished in the Holocene. These are the first chronological data presented for one of the northernmost Quaternary tufa systems in the Iberian Ranges.

The past distribution of pinus nigra arnold in northern iberia. Contribution from its macroremains.

The presence of Pinus nigra in central Spain, where its natural populations are very rare, has led to different interpretations of the current vegetation dynamics. Complementary to the available palynological evidence, macroremains provide local information of high taxonomic resolution that helps to reconstruct the palaeobiogeography of a given species. Here we present new macrofossil data from Tubilla del Lago, a small palaeolake located at the eastern part of the northern Iberian Meseta. We identified 17 wood samples and 71 cones on the basis of their wood anatomy and morphology, respectively. S ome of the fossil samples were radiocarbon dated (~4.230-3210 years cal BP). The results demonstrate the Holocene presence of P. nigra in the study area, where it is currently extinct. This evidence, together with other published palaeobotanical studies, indicates that the forests dominated by P. nigra must have had a larger importance on the landscape prior to the anthropogenic influence on the northern Iberian Meseta.

Analysis of Hail and Temperature Series for Peninsular Spain

Hail is a serious concern for agriculture on the Iberian Peninsula. Hailstorms affect crop yield and/or quality to a degree that depends on the crop species and the phenological time. In Europe, Spain is one of the countries that experience relatively high agricultural losses related to hailstorms. It is of high interest to study models that can support calculations of the probabilities of economic losses due to hail damage and of the tendency over time for such losses. Some studies developed in France and the Netherdlands show that the summer mean temperature was highly correlated with a yearly hail severity index developed from hailrelated parameters obtained for insurance purposes. Meanwhile, other studies in the USA point out that a highly significant correlation between both is not possible to find due to high climatic variability. The aim of this work is to test the correlation between average minimum temperatures and hail damage intensity over the Spanish Iberian Peninsula. With this purpose, correlation analyses on both variables were performed for the 47 Spanish provinces (as individuals and single set) and for all crops and four individual crops: grapes, wheat, barley and winter grains. Suitable crop insurance data are available from 1981 until 2007 and based on this period, temperature data were obtained. This study does not confirm the results previously obtained for France and the Netherlands that relate observed hail damage to the average minimum temperature. The reason for this difference and the nature of the cases observed are discussed.

Forecasting Electricity Prices and their volatilities using Unobserved Components.

The liberalization of electricity markets more than ten years ago in the vast majority of developed countries has introduced the need of modelling and forecasting electricity prices and volatilities, both in the short and long term. Thus, there is a need of providing methodology that is able to deal with the most important features of electricity price series, which are well known for presenting not only structure in conditional mean but also time-varying conditional variances. In this work we propose a new model, which allows to extract conditionally heteroskedastic common factors from the vector of electricity prices. These common factors are jointly estimated as well as their relationship with the original vector of series, and the dynamics affecting both their conditional mean and variance. The estimation of the model is carried out under the state-space formulation. The new model proposed is applied to extract seasonal common dynamic factors as well as common volatility factors for electricity prices and the estimation results are used to forecast electricity prices and their volatilities in the Spanish zone of the Iberian Market. Several simplified/alternative models are also considered as benchmarks to illustrate that the proposed approach is superior to all of them in terms of explanatory and predictive power.

Endosymbiotic bacteria nodulating a new endemic lupine Lupinus mariae-josephi from alkaline soils in Eastern Spain represent a new lineage within the Bradyrhizobium genus

Lupinus mariae-josephi is a recently described endemic Lupinus species from a small area in Eastern Spain where it thrives in soils with active lime and high pH. The L. mariae-josephi root symbionts were shown to be very slow-growing bacteria with different phenotypic and symbiotic characteristics from those of Bradyrhizobium strains nodulating other Lupinus. Their phylogenetic status was examined by multilocus sequence analyses of four housekeeping genes (16S rRNA, glnII, recA, and atpD) and showed the existence of a distinct evolutionary lineage for L. mariae-josephi that also included Bradyrhizobium jicamae. Within this lineage, the tested isolates clustered in three different sub-groups that might correspond to novel sister Bradyrhizobium species. These core gene analyses consistently showed that all the endosymbiotic bacteria isolated from other Lupinus species of the Iberian Peninsula were related to strains of the B. canariense or B. japonicum lineages and were separate from the L. mariae-josephi isolates. Phylogenetic analysis based on nodC symbiotic gene sequences showed that L. mariae-josephi bacteria also constituted a new symbiotic lineage distant from those previously defined in the genus Bradyrhizobium. In contrast, the nodC genes of isolates from other Lupinus spp. from the Iberian Peninsula were again clearly related to the B. canariense and B. japonicum bv. genistearum lineages. Speciation of L. mariae-josephi bradyrhizobia may result from the colonization of a singular habitat by their unique legume host.

Pinus uncinata Ramond ex DC.: Conservation and proposal of management at its southwestern limit of distribution (Castillo de Vinuesa, Soria, Spain)

Pinus uncinata forms forests in the centre and southwest of the Alps and in the subalpine Pyrenees (at around 1700 – 2600 m) (Costa Tenorio et al., 1997). The species reaches the southwestern limit of its distribution at the top of Mount Castillo de Vinuesa (Soria, Spain). The small population on this mountain occupies just 66 ha, but is very important from a geobotanical viewpoint since it is just one of two populations (the other being in the Sierra de Gúdar range in Teruel, Spain) isolated from the main area where the species is found in the Iberian Peninsula (The Pyrenees)

Differences into HT and HTO concentrations in air into the Western Mediterranean Basin and Continental Europe and Safety Related Issues.

Real time Tritium concentrations in air in two chemical forms, HT and HTO, coming from an ITER-like fusion reactor as source were coupled the European Centre Medium Range Weather Forecast (ECMWF) numerical model with the Lagrangian Atmospheric-particle dispersion model FLEXPART. This tool was analyzed in nominal tritium discharge operational reference and selected incidental conditions affecting the Western Mediterranean Basin during 45 days during summer 2010 together with surface “wind observations” or weather data based in real hourly observations of wind direction and velocity providing a real approximation of the tritium behavior after the release to the atmosphere from a fusion reactor. From comparison with NORMTRI - a code using climatologically sequences as input - over the same area, the real time results have demonstrated an apparent overestimation of the corresponding climatologically sequence of Tritium concentrations in air outputs, at several distances from the reactor. For this purpose two development patterns were established. The first one was following a cyclonic circulation over the Mediterranean Sea and the second one was based on the plume delivered over the Interior of the Iberian Peninsula and Continental Europe by another stabilized circulation corresponding to a High Pressure System. One of the important remaining activities defined then, was the qualification tool. In order to validate the model of ECMWF/FLEXPART we have developed of a new complete data base of tritium concentrations for the months from November 2010 to March 2011 and defined a new set of four patterns of HT transport in air, in each case using real boundary conditions: stationary to the North, stationary to the South, fast and very fast displacement. Finally the differences corresponding to those four early patterns (each one in assessments 1 and 2) has been analyzed in terms of the tuning of safety related issues and taking into account the primary phase o- - f tritium modeling, from its discharge to the atmosphere to the deposition on the ground, will affect to the complete tritium environmental pathway altering the chronic dose by absorption, reemission and ingestion both from elemental tritium, HT and from the oxide of tritium, HTO

Validation of real time dispersion of Tritium clouds over the Western Mediterranean Basin in different assesments

Real time Tritium concentrations in air coming from an ITER-like reactor as source were coupled the European Centre Medium Range Weather Forecast (ECMWF) numerical model with the lagrangian atmospheric dispersion model FLEXPART. This tool ECMWF/FLEXPART was analyzed in normal operating conditions in the Western Mediterranean Basin during 45 days at summer 2010. From comparison with NORMTRI plumes over Western Mediterranean Basin the real time results have demonstrated an overestimation of the corresponding climatologically sequence Tritium concentrations in air outputs, at several distances from the reactor. For these purpose two clouds development patterns were established. The first one was following a cyclonic circulation over the Mediterranean Sea and the second one was based in the cloud delivered over the Interior of the Iberian Peninsula by another stabilized circulation corresponding to a High. One of the important remaining activities defined then, was the tool qualification. The aim of this paper is to present the ECMWF/FLEXPART products confronted with Tritium concentration in air data. For this purpose a database to develop and validate ECMWF/FLEXPART tritium in both assessments has been selected from a NORMTRI run. Similarities and differences, underestimation and overestimation with NORMTRI will allowfor refinement in some features of ECMWF/FLEXPART

Level Set Segmentation with Shape and Appearance Models Using Affine Moment Descriptors

We propose a level set based variational approach that incorporates shape priors into edge-based and region-based models. The evolution of the active contour depends on local and global information. It has been implemented using an efficient narrow band technique. For each boundary pixel we calculate its dynamic according to its gray level, the neighborhood and geometric properties established by training shapes. We also propose a criterion for shape aligning based on affine transformation using an image normalization procedure. Finally, we illustrate the benefits of the our approach on the liver segmentation from CT images.

Lupinus mariae-josphi, a new lupin endemic of soils with active lime and high pH in South Eastern Spain, is nodulated by a new bacterial lineage within Bradyrhizobium genus

Lupinus mariae-josephi is a recently described species (Pascual, 2004) able to grow in soils with high pH and active lime content in the Valencia province (Spain). L. mariae-josephi endosymbionts are extremely slowgrowing bacteria with genetic and symbiotic characteristics that differentiate them from Bradyrhizobium strains nodulating Lupinus spp. native of the Iberian Peninsula and adapted to grow in acid soils. Cross-inoculation experiments revealed that all the endosymbiotic isolates from L. mariae-josephi tested are legume-host selective and are unable to nodulate species such as L. angustifolius, and L. luteus. In contrast, Bradyrhizobium strains from Lupinus spp. tested were able to nodulate L. mariae-josephi, although the nodules fixed nitrogen inefficiently. Phylogenetic analysis was performed with housekeeping genes (rrn, glnII, recA, atpD) and nodulation gene nodC. Housekeeping gene phylogeny revealed that L. mariae-josephi rhizobia form a strongly supported monophyletic group within Bradyrhizobium genus. This cluster also includes B. jicamae and certain strains of B. elkanii. Contrarily, isolates from other Lupinus spp. native of the Iberian Peninsula were grouped mainly within B. canariense and two B. japonicum lineages. Phylogenetic analysis of L. mariae-josephi isolates based on the nodC symbiotic gene defined a solid clade close to isolates from Algerian Retama spp. and to fast-growing rhizobia.

Monitor sísmico interactivo

Este trabajo tiene como objetivos la monitorización en tiempo real de la actividad sísmica, tanto próxima como lejana, a partir de los datos sísmicos registrados por una estación de banda ancha, y el desarrollo de un sistema de difusión interactiva de información actualizada de terremotos, destinado al público general. Ambas fuentes de información se mostrarán a través de una Unidad de Visualización denominada “Monitor Sísmico Interactivo”. El registro de los datos sísmicos se realiza utilizando el sensor de tres componentes de la estación sísmica GUD, perteneciente a la Red Digital de Banda Ancha y transmisión digital del Instituto Geográfico Nacional, instalada en la Basílica del Valle de los Caídos, en lalocalidad de Guadarrama (Madrid). En la E.T.S.I. Topografía, Geodesia y Cartografía se ha instalado un ordenador con conexión a Internet, para la recepción y almacenamiento de los datos, y los programas Scream y Drumplot desarrollados por Guralp, necesarios para la monitorización de la señal sísmica en tiempo real. A partir de estos datos, mediante aplicaciones desarrolladas bajo programación Linux y haciendo uso de las herramientas que ofrece el software SAC (Seismic Analysis Code), se genera además un registro gráfico y una película animada de dicha segmentación para cada evento. Se ha configurado un servidor de correo y una cuenta para la recepción de dos tipos de mensajes de correo, enviados desde la sede central del Instituto Geográfico Nacional, con la información de los eventos registrados por GUD una vez revisados: - Mensajes enviados diariamente, con un listado de eventos ocurridos en los 30 últimos días. - Mensajes con la información en cuasi tiempo real de la última alerta sísmica. Se ha desarrollado el programa “saco” para la gestión del correo recibido que analiza la información sísmica, la almacena en ficheros y ejecuta sobre ellos las aplicaciones de dibujo. Estas aplicaciones han sido previamente desarrolladas bajo programación Linux y software GMT (Generic Mapping Tools), y a partir de ellas se generan automáticamente las distintas imágenes que se visualizan en el Monitor Sísmico: un mapa de sismicidad próxima en la Península Ibérica, un mapa de sismicidad lejana en el mundo, un mapa de detalle para localizar y representar la última alerta generada, los listados con la información de los eventos representados en los mapas, los registros gráficos y las películas animadas de dichos sismogramas. Monitor Sísmico Interactivo ha sido desarrollado para ofrecer además la posibilidad de interactuar con la Unidad de Visualización: se ha creado una base de datos para uso científico donde se almacenan todos los eventos registrados por GUD. Así el usuario puede realizar una petición, a través del envío de un mensaje de correo, que le permite visualizar de forma instantánea las imágenes que muestran la información de cualquier terremoto de su interés. ABSTRACT This study is aimed at real-time monitoring of both near and distant seismic activityfrom the seismic data recorded by a broadband seismic station, and the development of an interactive broadcast system of updated information of earthquakes, for the general public. Bothsources of information are displayed through a display unit called "Interactive Seismic Monitor". The seismic data recording is carried out by using the three-component sensor of the GUD seismic station, which belongs to the Digital Network Broadband and digital broadcast of the National Geographic Institute, housed in the Basilica of The Valley of the Fallen, in the town of Guadarrama (Madrid). A computer with Internet connection has been installed in E.T.S.I. Surveying, Geodesy and Cartography for receiving and storing data, together with Scream and Drumplot programs, developed by Guralp, which are necessary for monitoring the real time seismic signal. Based on the data collected, through programming applications developed under Linux system and using the software tools provided by the SAC (Seismic Analysis Code), a chart recorder and an animated gif image of the segmentation for each event are also generated. A mail server and a mail account have been configured for the receipt of two types of email messages, sent from the National Geographic Institute head office, with the information of the events recorded by GUD after being reviewed: - Messages sent daily, providing a list of events in the past 30 days. - Messages containing information on near real-time seismic of the last seismic alert. A program called "saco" has also been developed for handling mail received that analyzes the seismic data, which stores it in files and runs drawing applications on them. These applications have been previously developed under Linux system and software programming GMT (Generic Mapping Tools), and from them different images that are displayed on the Seismic Monitor are automatically generated: a near seismicity Iberian peninsula map, a distant seismicity world map, a detailed map to locate and represent the last seismic alert generated, the lists with the information of the events depicted in the maps,together with the charts and the animated gif image of such seismograms. Interactive Seismic Monitor has been developed to offer any user the possibility of interacting with the display unit: a database has been created for scientific use which stores all the events recorded by GUD. Thus, any user could make a request, by sending an e-mail that allows them to view instantly all the images showing the information of any earthquake of interest on the display unit.

Estudio de la macroflora en yacimientos del Neógeno y Pleistoceno inferior del noroeste peninsular: significación paleoclimática

La presente tesis doctoral se centra en el estudio de dos yacimientos de macrorrestos fosiles vegetales, en especial maderas en diferentes estados de conservacion, y su interpretacion dentro del contexto del Neogeno Iberico. En primer lugar se detallan los objetivos del trabajo y los antecedentes del mismo. A continuacion, se describen detalladamente los dos yacimientos estudiados y se exponen las tecnicas empleadas de acuerdo con los diferentes tipos de materiales. Mas tarde se identifican taxonomicamente todos los restos hallados en los mismos. En el mismo capitulo de resultados se aplica el Metodo de Coexistencia sobre los principales yacimientos neogenos de la peninsula Iberica, para la estimacion de valores climaticos y se elabora un modelo de evolucion climatica para este periodo. Por ultimo, se discuten los resultados obtenidos, estableciendo una hipotesis de composicion y estructura de los bosques que vivieron en el tiempo en el que se depositaron los restos estudiados, se comparan con los datos obtenidos por otros autores y se combinan estos resultados con los datos del modelo de clima para reconstruir una sintesis de la evolucion de la vegetacion de la Peninsula durante el Periodo Neogeno y Gelasiense. Abstract This PhD thesis is based on the study of two different sites of vegetal fossil remains, specially wood in different preservation states, and their meaning in Iberian Neogene context. First of all, the objectives of the work and previous records are explained thoroughly. Secondly, the two deposits are described in detail, as well as the techniques used, according to different types of materials. Later on, all the samples found in each one are identified. In the same chapter of results, the “Coexistence Approach” is applied on the main Neogen sites of the Iberian Peninsula to estimate climatic intervals, and a model of climatic evolution for this period is built. Finally, the achieved results are discussed, setting an hypothesis about the composition and structure of the forests that lived in the time when the studied samples were settled. These results are then compared with the data gathered by different authors, and related to the data of the climatic model, to make a synthesis of the evolution of the vegetation in the Iberian Peninsula, during Neogene and Gelasian.

Historia holocena de los pinares montanos de los sistemas Central y Cantábrico: Un objetivo con dos enfoques, biogeográfico y dendroecológico

Los estudios paleoecológicos holocenos basados en macro- y megafósiles encierran un gran valor debido a que su información tiene generalmente carácter local, su origen es conocido, pueden ser datados directamente mediante el método radiocarbónico, y pueden identificarse a un nivel taxonómicamente preciso. Sin embargo son pocas las áreas del Sur de Europa en las que sea conocida una alta densidad de yacimientos con restos leñosos de gran tamaño. En esta tesis, se presentan datos de 53 yacimientos de la sierra de Gredos y de la cordillera Cantábrica (Península Ibérica). Los restos fueron hallados en ambientes variados, como zonas higroturbosas, turberas erosionadas o lagos, y fueron identificadas mediante el estudio de la anatomía de la madera o mediante rasgos morfológicos. En la sierra de Gredos, la evidencia paleobotánica indica la existencia de un panorama relativamente estable a lo largo del Holoceno medio y principio del Holoceno final y sugiere la persistencia, a lo largo de milenios, de un piso de pinares ampliamente distribuído en cotas altas de la sierra. La información obtenida de piñas y frutos mejoran la información taxonómica disponible y revelan la existencia tanto de Pinus sylvestris como de Pinus nigra en estas sierras durante el Holoceno. La datación radiocarbónica, medición de anillos de crecimiento y sincronización preliminar de 26 secciones de troncos de subfósiles demuestran el potencial de este material de las montañas de Iberia central en la obtención de cronologías holocenas de pino. En la cordillera Cantábrica, los datos aportan información espacialmente precisa de distribuciones de ciertas especies arbóreas durante el Holoceno. En las zonas centrales de la cordillera, han sido hallados fundamentalmente restos de pino, mientras que en las zonas más occidentales los pinos estás ausentes y los restos encontrados corresponden a otras especies de caducifolios (Betula, Salix, Quercus) y arbustos (Erica, Fabaceae) Esta información paleobiogeográfica constrasta con la distribución natural actual de Pinus sylvestris y Pinus nigra en el área de estudio. En la sierra de Gredos, la naturalidad de las escasos rodales de pinos que aún persisten ha sido discutida, mientras que en la cordillera Cantábrica, la única especie del grupo que persiste es P. sylvestris y está localizada en unos pocos relictos. El clima pudo haber jugado un papel importante en una primera fase de declive de los pinares durante el Holoceno inicial, mostrado en numerosos registros polínicos de manera casi sincrónica y asociada a una expansión de frondosas. Sin embargo la información histórica disponible y la comparación entre las áreas de distribución de los pinares en el presente, modelizada y en momentos anteriores a la la generalización de la presión antrópica sugiere que durante los últimos dos milenios, la actividad humana ha sido responsable de la desaparición de estas especies como árboles naturales en áreas extensas. ABSTRACTMacro- and megafossil studies provide information of great value in palaeoecology because such evidence is spatially precise, directly radiocarbon dated and usually taxon-specific. However, few areas of southern Europe have a high density of sites with Holocene woody remains. Here, local data from 53 sites in the Gredos Mountains and the Cantabrian Range (Iberian Peninsula) is presented. Woody remains were recovered from mires, eroded peat bogs and lakes and were identified by their wood anatomy or morphological traits. In the Gredos Mountains, palaeobotanical evidence portrays a relatively stable picture of tree distribution over the mid- and beggining of the late-Holocene, and suggests the persistence of a widespread belt of pinewoods. Cones and fruits enlarge the taxonomic information available and reveal that both Pinus sylvestris and Pinus nigra were present locally during the Holocene. Radiocarbon dating, tree ring measurement and preliminary cross-dating of 26 pine sub-fossil logs demonstrate the potential of obtaining a long pine chronology from subfossil wood from the mountains of Central Iberia. In the Cantabrian Range the data provide spatially precise evidence of tree distribution in the region during the Holocene. Pines were mostly identified in the central areas, whereas at the western edge no pine evidence was detected and deciduous trees (Betula, Salix, Quercus) and shrubs (Erica, Fabaceae) were identified. This palaeoecological information contrasts with the current natural distribution ranges of P. sylvestris and P. nigra in the study area. In the Gredos Mountains, the naturality of the few pine stands currently growing has been heavily debated. In the Cantabrian Range P. sylvestris is the only pine species that is today present, and its natural presence is now limited to a few enclaves. Climate may have played a key role in the early-Holocene, as pollen archives document a pine demise that is synchronous with the spread of broadleaved taxa. However, available historical data and the comparison of the reconstructed distribution of pinewoods before extensive human forest disturbance with both present and modelled distributions suggests that during the last two millennia, anthropogenic activity may have removed these species as native trees from a large territory.

Aplicaciones de interés forestal de las imágenes obtenidas con el sensor Multi-angle Imaging SpectroRadiometer (MISR)

Las aplicaciones de la teledetección al seguimiento de lo que ocurre en la superficie terrestre se han ido multiplicando y afinando con el lanzamiento de nuevos sensores por parte de las diferentes agencias espaciales. La necesidad de tener información actualizada cada poco tiempo y espacialmente homogénea, ha provocado el desarrollo de nuevos programas como el Earth Observing System (EOS) de la National Aeronautics and Space Administration (NASA). Uno de los sensores que incorpora el buque insignia de ese programa, el satélite TERRA, es el Multi-angle Imaging SpectroRadiometer (MISR), diseñado para capturar información multiangular de la superficie terrestre. Ya desde los años 1970, se conocía que la reflectancia de las diversas ocupaciones y usos del suelo variaba en función del ángulo de observación y de iluminación, es decir, que eran anisotrópicas. Tal variación estaba además relacionada con la estructura tridimensional de tales ocupaciones, por lo que se podía aprovechar tal relación para obtener información de esa estructura, más allá de la que pudiera proporcionar la información meramente espectral. El sensor MISR incorpora 9 cámaras a diferentes ángulos para capturar 9 imágenes casi simultáneas del mismo punto, lo que permite estimar con relativa fiabilidad la respuesta anisotrópica de la superficie terrestre. Varios trabajos han demostrado que se pueden estimar variables relacionadas con la estructura de la vegetación con la información que proporciona MISR. En esta Tesis se ha realizado una primera aplicación a la Península Ibérica, para comprobar su utilidad a la hora de estimar variables de interés forestal. En un primer paso se ha analizado la variabilidad temporal que se produce en los datos, debido a los cambios en la geometría de captación, es decir, debido a la posición relativa de sensores y fuente de iluminación, que en este caso es el Sol. Se ha comprobado cómo la anisotropía es mayor desde finales de otoño hasta principios de primavera debido a que la posición del Sol es más cercana al plano de los sensores. También se ha comprobado que los valores máximo y mínimo se van desplazando temporalmente entre el centro y el extremo angular. En la caracterización multiangular de ocupaciones del suelo de CORINE Land Cover que se ha realizado, se puede observar cómo la forma predominante en las imágenes con el Sol más alto es convexa con un máximo en la cámara más cercana a la fuente de iluminación. Sin embargo, cuando el Sol se encuentra mucho más bajo, ese máximo es muy externo. Por otra parte, los datos obtenidos en verano son mucho más variables para cada ocupación que los de noviembre, posiblemente debido al aumento proporcional de las zonas en sombra. Para comprobar si la información multiangular tiene algún efecto en la obtención de imágenes clasificadas según ocupación y usos del suelo, se han realizado una serie de clasificaciones variando la información utilizada, desde sólo multiespectral, a multiangular y multiespectral. Los resultados muestran que, mientras para las clasificaciones más genéricas la información multiangular proporciona los peores resultados, a medida que se amplían el número de clases a obtener tal información mejora a lo obtenido únicamente con información multiespectral. Por otra parte, se ha realizado una estimación de variables cuantitativas como la fracción de cabida cubierta (Fcc) y la altura de la vegetación a partir de información proporcionada por MISR a diferentes resoluciones. En el valle de Alcudia (Ciudad Real) se ha estimado la fracción de cabida cubierta del arbolado para un píxel de 275 m utilizando redes neuronales. Los resultados muestran que utilizar información multiespectral y multiangular puede mejorar casi un 20% las estimaciones realizadas sólo con datos multiespectrales. Además, las relaciones obtenidas llegan al 0,7 de R con errores inferiores a un 10% en Fcc, siendo éstos mucho mejores que los obtenidos con el producto elaborado a partir de datos multiespectrales del sensor Moderate Resolution Imaging Spectroradiometer (MODIS), también a bordo de Terra, para la misma variable. Por último, se ha estimado la fracción de cabida cubierta y la altura efectiva de la vegetación para 700.000 ha de la provincia de Murcia, con una resolución de 1.100 m. Los resultados muestran la relación existente entre los datos espectrales y los multiangulares, obteniéndose coeficientes de Spearman del orden de 0,8 en el caso de la fracción de cabida cubierta de la vegetación, y de 0,4 en el caso de la altura efectiva. Las estimaciones de ambas variables con redes neuronales y diversas combinaciones de datos, arrojan resultados con R superiores a 0,85 para el caso del grado de cubierta vegetal, y 0,6 para la altura efectiva. Los parámetros multiangulares proporcionados en los productos elaborados con MISR a 1.100 m, no obtienen buenos resultados por sí mismos pero producen cierta mejora al incorporarlos a la información espectral. Los errores cuadráticos medios obtenidos son inferiores a 0,016 para la Fcc de la vegetación en tanto por uno, y 0,7 m para la altura efectiva de la misma. Regresiones geográficamente ponderadas muestran además que localmente se pueden obtener mejores resultados aún mejores, especialmente cuando hay una mayor variabilidad espacial de las variables estimadas. En resumen, la utilización de los datos proporcionados por MISR ofrece una prometedora vía de mejora de resultados en la media-baja resolución, tanto para la clasificación de imágenes como para la obtención de variables cuantitativas de la estructura de la vegetación. ABSTRACT Applications of remote sensing for monitoring what is happening on the land surface have been multiplied and refined with the launch of new sensors by different Space Agencies. The need of having up to date and spatially homogeneous data, has led to the development of new programs such as the Earth Observing System (EOS) of the National Aeronautics and Space Administration (NASA). One of the sensors incorporating the flagship of that program, the TERRA satellite, is Multi-angle Imaging Spectroradiometer (MISR), designed to capture the multi-angle information of the Earth's surface. Since the 1970s, it was known that the reflectance of various land covers and land uses varied depending on the viewing and ilumination angles, so they are anisotropic. Such variation was also related to the three dimensional structure of such covers, so that one could take advantage of such a relationship to obtain information from that structure, beyond which spectral information could provide. The MISR sensor incorporates 9 cameras at different angles to capture 9 almost simultaneous images of the same point, allowing relatively reliable estimates of the anisotropic response of the Earth's surface. Several studies have shown that we can estimate variables related to the vegetation structure with the information provided by this sensor, so this thesis has made an initial application to the Iberian Peninsula, to check their usefulness in estimating forest variables of interest. In a first step we analyzed the temporal variability that occurs in the data, due to the changes in the acquisition geometry, i.e. the relative position of sensor and light source, which in this case is the Sun. It has been found that the anisotropy is greater from late fall through early spring due to the Sun's position closer to the plane of the sensors. It was also found that the maximum and minimum values are displaced temporarily between the center and the ends. In characterizing CORINE Land Covers that has been done, one could see how the predominant form in the images with the highest sun is convex with a maximum in the camera closer to the light source. However, when the sun is much lower, the maximum is external. Moreover, the data obtained for each land cover are much more variable in summer that in November, possibly due to the proportional increase in shadow areas. To check whether the information has any effect on multi-angle imaging classification of land cover and land use, a series of classifications have been produced changing the data used, from only multispectrally, to multi-angle and multispectral. The results show that while for the most generic classifications multi-angle information is the worst, as there are extended the number of classes to obtain such information it improves the results. On the other hand, an estimate was made of quantitative variables such as canopy cover and vegetation height using information provided by MISR at different resolutions. In the valley of Alcudia (Ciudad Real), we estimated the canopy cover of trees for a pixel of 275 m by using neural networks. The results showed that using multispectral and multiangle information can improve by almost 20% the estimates that only used multispectral data. Furthermore, the relationships obtained reached an R coefficient of 0.7 with errors below 10% in canopy cover, which is much better result than the one obtained using data from the Moderate Resolution Imaging Spectroradiometer (MODIS), also onboard Terra, for the same variable. Finally we estimated the canopy cover and the effective height of the vegetation for 700,000 hectares in the province of Murcia, with a spatial resolution of 1,100 m. The results show a relationship between the spectral and the multi-angle data, and provide estimates of the canopy cover with a Spearman’s coefficient of 0.8 in the case of the vegetation canopy cover, and 0.4 in the case of the effective height. The estimates of both variables using neural networks and various combinations of data, yield results with an R coefficient greater than 0.85 for the case of the canopy cover, and 0.6 for the effective height. Multi-angle parameters provided in the products made from MISR at 1,100 m pixel size, did not produce good results from themselves but improved the results when included to the spectral information. The mean square errors were less than 0.016 for the canopy cover, and 0.7 m for the effective height. Geographically weighted regressions also showed that locally we can have even better results, especially when there is high spatial variability of estimated variables. In summary, the use of the data provided by MISR offers a promising way of improving remote sensing performance in the low-medium spatial resolution, both for image classification and for the estimation of quantitative variables of the vegetation structure.

Pinos y arte : ensayo de contextualización en la naturaleza desde el Paleolítico a Roma

Al ser la naturaleza objeto de representación artística por el hombre, campos tan diversos como el arte y la ciencia forestal pueden compartir sus orígenes. Los pinos son un género botánico repartido por la cuenca mediterránea capaces de suscitar emociones al haber sido sujetos de lo que fue una innovación cultural. Se propone que los pinos pudieron ser objeto de las primeras representaciones artísticas de los antiguos pobladores de la Península Ibérica. La metodología en la selección de resultados se basa en patrones morfológicos: patrón 1 (plántulas de pino en sus primeras etapas de crecimiento), patrón 2 (dibujos asimilables a ramas de pino) y patrón 3 (dibujos de pinos de gran porte). La presentación de los resultados se estructura en: parte I (referente a las representaciones artísticas estimadas como de pinos en la prehistoria, diferenciando el arte paleolítico del post-paleolítico), parte II (contempla los resultados encontrados en el repertorio iconográfico del arte Íbero y Celtíbero) y parte III (presenta una selección de resultados del arte romano en Hispania). Las diferentes etapas artísticas se articulan comenzando con una introducción, seguida de enfoques multidisciplinares que incluyen una visión histórica del paisaje o de la ecología de la vegetación. A continuación se exponen los resultados de la revisión realizada en cada etapa histórica y el estudio y descripción de las piezas seleccionadas (localización geográfica, datación arqueológica, clasificación genérica de técnica, materiales, dimensiones, iconografía, contexto cultural y procedencia) y por último su discusión en cuanto a su adscripción al género Pinus y a la flora presente en el entorno, caso de ser posible. Esta información se completa con gráficos, diagramas, mapas y tablas situándolas en su contexto arqueológico y cronológico, aportando datos sobre el carácter utilitario, simbólico o ideológico de los pinos, cuya pervivencia se manifiesta en ser protagonistas de gran número de festejos en la España rural de nuestros días. SUMMARY Nature has been represented in paintings since ancient times, which enables fields of study as separate as art and forest science to share a common origin. Pine-tress belong to a botanical genus widely distributed throughout the Mediterranean basin, which are capable of rising emotion and being a representation of what at that time was cultural innovation, subsequently becoming symbols. In this dissertation we hypothesise that pine forest may have been one of the first artistic representations of the ancient dwellers of the Iberian Peninsula. The methodology used for the selection of results is based on morphological patterns, i.e.: Patern 1 (pine seedlings at their first developmental stages), Pattern 2 (drawings associated with pine branches and shoots), and Pattern 3 (paintings of large pine-trees). Results are shown according to the following structure: Part I (relating to prehistoric paintings identified as pines and differentiating Paleolithic from Post-Paleolithic art), Part II (involves the results gathered concerning Iberian and Celtiberian iconographic art) and Part III (including a selection of Roman art in Hispania concerning pine representations). The different artistic periods are linked beginning by an Introduction, followed by a multidisciplinary approach ranging from a historical landscape analysis to plant ecology within a Mediterranean context. Thereafter, results are presented by assessing each historical period and by describing each of the particular art pieces subjected to investigation (geographical location, archaeological date, generic classification of the art technique, materials, dimensions, iconography and cultural context and origin). Finally, the results are discussed according to their ascription to the Pinus genus and when possible, in relation with the surrounding flora. The information provided is complemented with diagrams, maps and tables to enable its understanding within a chronological and archaeological context and providing evidence for the functional, symbolic and ideological character of pines, which are still alive in Spain in the form of many rural feasts with particular kinds of celebrations where this species plays a central role.