Numerical and experimental study of the dynamics of axisymmetric slender liquid bridges

A one-dimensional inviscid slice model has been used to study numerically the influence of axial microgravity on the breaking of liquid bridges having a volume close to that of gravitationless minimum volume stability limit. Equilibrium shapes and stability limits have been obtained as well as the dependence of the volume of the two drops formed after breaking on both the length and the volume of the liquid bridge. The breaking process has also been studied experimentally. Good agreement has been found between theory and experiment for neutrally buoyant systems

Axisymmetric long liquid bridges in a time-dependent microgravity field

This paper deals with the dynamics of liquid bridges when subjected to an oscillatory microgravity field. The analysis has been performed by using a one-dimensional slice model, already used in liquid bridge problems, which allows to calculate not only the resonance frequencies of a wide range of such fluid configurations but also the dependence of the dynamic response of the liquid bridge on the frequency on the imposed perturbations. Theoretical results are compared with experimental ones obtained aboard Spacelab-Dl, the agreement between theoretical and experimental results being satisfactory

Axisymmetric long liquid bridges stability and resonances

In this paper mathematical expressions for minimum-volume stability limits and resonance frequencies of axisymmetric long liquid bridges are presented. These expressions are valid for a wide range of liquid bridge configurations, accounting for ef-fects like unequal disks and axial microgravity in the case of minimum-volume stability limits,and unequal disks, axial microgravity,non-zero viscosity and liquid bridge volume different from the cylindrical one in the case of resonance frequencies.

The Future of the Technologies of Shell and spatial Structures. Bridges

The objective of this lecture is try to predict the future of this important type of spatial structures. In this way the activities of the different IASS Technical Working Groups can be stimulated and coordinated in order to play a more relevant role in this future. To grasp a possible evolution of bridges it is convenient a reflection on the bridge history and on their present situation, particularly in relation to the different existing achievements.

Dynamic behaviour of underspanned suspension road bridges under traffic loads

Underspanned suspension bridges are structures with important economical and aesthetic advantages, due to their high structural efficiency. However, road bridges of this typology are still uncommon because of limited knowledge about this structural system. In particular, there remains some uncertainty over the dynamic behaviour of these bridges, due to their extreme lightness. The vibrations produced by vehicles crossing the viaduct are one of the main concerns. In this work, traffic-induced dynamic effects on this kind of viaduct are addressed by means of vehicle-bridge dynamic interaction models. A finite element method is used for the structure, and multibody dynamic models for the vehicles, while interaction is represented by means of the penalty method. Road roughness is included in this model in such a way that the fact that profiles under left and right tyres are different, but not independent, is taken into account. In addition, free software {PRPgenerator) to generate these profiles is presented in this paper. The structural dynamic sensitivity of underspanned suspension bridges was found to be considerable, as well as the dynamic amplification factors and deck accelerations. It was also found that vehicle speed has a relevant influence on the results. In addition, the impact of bridge deformation on vehicle vibration was addressed, and the effect on the comfort of vehicle users was shown to be negligible.

An interactive web-based learning assistant for structural analysis of continuous beams

There are significant levels of concern about the relevance and the difficulty of learning some issues on Strength of Materials and Structural Analysis. Most students of Continuum Mechanics and Structural Analysis in Civil Engineering usually point out some key learning aspects as especially difficult for acquiring specific skills. These key concepts entail comprehension difficulties but ease access and applicability to structural analysis in more advanced subjects. Likewise, some elusive but basic structural concepts, such as flexibility, stiffness or influence lines, are paramount for developing further skills required for advanced structural design: tall buildings, arch-type structures as well as bridges. As new curricular itineraries are currently being implemented, it appears appropriate to devise a repository of interactive web-based applications for training in those basic concepts. That will hopefully train the student to understand the complexity of such concepts, to develop intuitive knowledge on actual structural response and to improve their preparation for exams. In this work, a web-based learning assistant system for influence lines on continuous beams is presented. It consists of a collection of interactive user-friendly applications accessible via Web. It is performed in both Spanish and English languages. Rather than a “black box” system, the procedure involves open interaction with the student, who can simulate and virtually envisage the structural response. Thus, the student is enabled to set the geometric, topologic and mechanic layout of a continuous beam and to change or shift the loading and the support conditions. Simultaneously, the changes in the beam response prompt on the screen, so that the effects of the several issues involved in structural analysis become apparent. The system is performed through a set of web pages which encompasses interactive exercises and problems, written in JavaScript under JQuery and DyGraphs frameworks, given that their efficiency and graphic capabilities are renowned. Students can freely boost their self-study on this subject in order to face their exams more confidently. Besides, this collection is expected to be added to the "Virtual Lab of Continuum Mechanics" of the UPM, launched in 2013 (http://serviciosgate.upm.es/laboratoriosvirtuales/laboratorios/medios-continuos-en-construcci%C3%B3n)

Análisis de registros de aceleraciones verticales en caja de grasa y correlación con la infraestructura

El sector ferroviario ha experimentado en los últimos años un empuje espectacular acaparando las mayores inversiones en construcción de nuevas líneas de alta velocidad. Junto a esta inversión inicial no se debe perder de vista el coste de mantenimiento y gestión de las mismas y para ello es necesario avanzar en el conocimiento de los fenómenos de interacción de la vía y el material móvil. En los nuevos trazados ferroviarios, que hacen del ferrocarril un modo de transporte competitivo, se produce un notable aumento en la velocidad directamente relacionado con la disminución de los tiempos de viaje, provocando por ello elevados esfuerzos dinámicos, lo que exige una elevada calidad de vía para evitar el rápido deterioro de la infraestructura. Resulta primordial controlar y minimizar los costes de mantenimiento que vienen generados por las operaciones de conservación de los parámetros de calidad y seguridad de la vía férrea. Para reducir las cargas dinámicas que actúan sobre la vía deteriorando el estado de la misma, debido a este aumento progresivo de las velocidades, es necesario reducir la rigidez vertical de la vía, pero igualmente este aumento de velocidades hace necesarias elevadas resistecias del emparrillado de vía y mejoras en las plataformas, por lo que es necesario buscar este punto de equilibrio en la elasticidad de la vía y sus componentes. Se analizan las aceleraciones verticales medidas en caja de grasa, identificando la rigidez vertical de la vía a partir de las frecuencias de vibración vertical de las masas no suspendidas, correlacionándola con la infraestructura. Estas aceleraciones verticales se desprenden de dos campañas de medidas llevadas a cabo en la zona de estudio. En estas campañas se colocaron varios acelerómetros en caja de grasa obteniendo un registro de aceleraciones verticales a partir de las cuales se ha obteniendo la variación de la rigidez de vía de unas zonas a otras. Se analiza la rigidez de la vía correlacionándola con las distintas tipologías de vía y viendo la variación del valor de la rigidez a lo largo del trazado ferroviario. Estos cambios se manifiestan cuando se producen cambios en la infraestructura, de obras de tierra a obras de fábrica, ya sean viaductos o túneles. El objeto principal de este trabajo es profundizar en estos cambios de rigidez vertical que se producen, analizando su origen y las causas que los provocan, modelizando el comportamiento de los mismos, para desarrollar metodologías de análisis en cuanto al diseño de la infraestructura. Igualmente se analizan los elementos integrantes de la misma, ahondando en las características intrínsecas de la rigidez vertical global y la rigidez de cada uno de los elementos constituyentes de la sección tipo ferroviaria, en cada una de las secciones características del tramo en estudio. Se determina en este trabajo si se produce y en qué medida, variación longitudinal de la rigidez de vía en el tramo estudiado, en cada una de las secciones características de obra de tierra y obra de fábrica seleccionadas analizando las tendencias de estos cambios y su homogeneidad a lo largo del trazado. Se establece así una nueva metodología para la determinación de la rigidez vertical de la vía a partir de las mediciones de aceleraciones verticales en caja de grasa así como el desarrollo de una aplicación en el entorno de Labview para el análisis de los registros obtenidos. During the last years the railway sector has experienced a spectacular growth, focusing investments in the construction of new high-speed lines. Apart from the first investment the cost of maintaining and managing them has to be considered and this requires more knowledge of the process of interaction between track and rolling stock vehicles. In the new high-speed lines, that make of the railway a competitive mode of transport, there is a significant increase in speed directly related to the shorten in travel time, and that produces high dynamic forces. So, this requires a high quality of the track to avoid quickly deterioration of infrastructure. It is essential to control and minimize maintenance costs generated by maintenance operations to keep the quality and safety parameters of the railway track. Due to this gradual increase of speed, and to reduce the dynamic loads acting on the railway track causing its deterioration, it is necessary to reduce the vertical stiffness of the track, but on the other hand this speed increase requires high resistance of the railway track and improvements of the railway platform, so we must find the balance between the elasticity of the track and its components. Vertical accelerations in axle box are measured and analyzed, identifying the vertical stiffness of the railway track obtained from the vertical vibration frequency of the unsprung masses, correlating with the infrastructure. These vertical accelerations are the result of two measurement campaigns carried out in the study area with the placement of several accelerometers located in the axle box. From these vertical accelerations the variation of the vertical stiffness from one area to another is obtained. The track stiffness is analysed relating with the different types of infrastructure and the change in the value of the stiffness along the railway line. These changes are revealed when changes in infrastructure occurs, for instance; earthworks to bridges or tunnels. The main purpose of this paper is to examine these vertical stiffness changes, analysing its origins and causes, modelling their behaviour, developing analytical methodologies for the design of infrastructure. In this thesis it is also reviewed the different elements of the superstructure, paying special attention to the vertical stiffness of each one. In this study is determined, if it happens and to what extent, the longitudinal variation in the stiffness of track along the railway line studied in every selected section; earthwork, bridges and tunnels. They are also analyzed trends of these changes and homogeneity along the path. This establishes a new method for determining the vertical stiffness of the railway track from the vertical accelerations measured on axle box as well as an application developed in LabView to analyze the recordings obtained.

Lateral Dynamic Models for High-Speed Railway Bridges and Vehicles

The analysis of the running safety of railway vehicles on viaducts subject to strong lateral actions such as cross winds requires coupled nonlinear vehicle-bridge interaction models, capable to study extreme events. In this paper original models developed by the authors are described, based on finite elements for the structure, multibody and finite element models for the vehicle, and specially developed interaction elements for the interface between wheel and rail. The models have been implemented within ABAQUS and have full nonlinear capabilities for the structure, the vehicle and the contact interface. An application is developed for the Ulla Viaduct, a 105 m tall arch in the Spanish high-speed railway network. The dynamic analyses allow obtaining critical wind curves, which define the running safety conditions for a given train in terms of speed of circulation and wind speed

Minimum volume stability limits for axisymmetric liquid bridges subject to steady axial acceleration

In this paper the influence of an axial microgravity on the minimum volume stability limit of axisymmetric liquid bridges between unequal disks is analyzed both theoretically and experimentally. The results here presented extend the knowledge of the static behaviour of liquid bridges to fluid configurations different from those studied up to now (almost equal disks). Experimental results, obtained by simulating microgravity conditions by the neutral buoyancy technique, are also presented and are shown to be in complete agreement with theoretical ones.

Stability limits of minimum volume and breaking axisymmetric liquid bridges between unequal disks

This paper deals with the stability limits of minimum volume and the breaking of axisymmetric liquid columns held by capillary forces between two concentric,circular solid disk of different radii. The problem has been analyzed both theoreti-cally and experimentally. A theoretical analysis concerning the breaking of liquid bridges has been performed by using a one-dimensional slice model already used in liquid bridge problems. Experiments have been carried out by using milli-metric liquid bridges, and minimum volume stability limits as well as the volumes of the drops resulting after breaking have been measured for a large number of liquid bridge configurations. Experimental results being in agreement with theoretical prediction.

Dynamic stability of long axisymmetric liquid bridges

This paper deals with the non-linear forced oscillations of axisymmetric long liquid bridges between equal disks. The dynamics of the liquid bridge has been analyzed by using a self-similar, one-dimensional model already used in similar problems. The influence of the dynamics on the static stability limits, as well as the main characteristics of the non-linear behaviour of long liquid bridges, have been studied with in the range of validity of the mathematical model used here.

An experimental analysis od the stability and the dynamics of asixymmetric liquid bridges between unequal disks

In this paper experimental results related to both stability an the dynamic of a asiximmetric liquid bridge between unequal disk are presented. Experiments have been performed by using a drop tower facility and the response of the liquid bridge to a sudden change of the acceleration level acting on it has bee obtained.

On the use of liquid bridges as accelerometers

The shape of the interface of a drop of liquid held by surface tension forces between two solid disks,a liquid bridge, depends on the geometry of the supporting disks, the volume of liquid and the external forces acting on the drop. Therefore, once the geometry of the supporting disks and the volume of liquid are fixed, and assuming that the value of the surface tension is known, a way to measure such external forces could be by measuring the deformation of the liquid bridge interface.

On the stability limits of long nonaxisymmetric cylindrical liquid bridges

There is a self-similar solution for the stability limits of long, almost cylindrical liquid bridges between equal disks subjected to both axial and lateral accelerations. The stability limits depend on only two variables; the so-called reduced axial, and lateral Bond numbers. A novel experimental setup that involved rotating a horizontal cylindrical liquid bridge about a vertical axis of rotation was designed to test the stability limits predicted by the self-similar solution. Analytical predictions compared well with both numerical and experimental results.

An experimental study of the breakage of liquid bridges at stability limit of minimum volume

An experimental apparatus to study the breaking process of axisymmetric liquid bridges has been developed, and the breaking sequences of a large number of liquid bridge configurations at minimum-volume stability limit have been analyzed. Experimental results show that very close to the breaking moment the neck radius of the liquid bridge varies as t1/3, where t is the time to breakage, irrespective of the value of the distance between the solid disks that support the liquid column.