Bankable procedures for the technical quality assurance of large scale PV plants

Strict technical quality assurance procedures are essential for PV plant bankability. When large-scale PV plants are concerned, this is typically accomplished in three consecutive phases: an energy yield forecast, that is performed at the beginning of the project and is typically accomplished by means of a simulation exercise performed with dedicated software; a reception test campaign, that is performed at the end of the commissioning and consists of a set of tests for determining the efficiency and the reliability of the PV plant devices; and a performance analysis of the first years of operation, that consists in comparing the real energy production with the one calculated from the recorded operating conditions and taking into account the maintenance records. In the last six years, IES-UPM has offered both indoor and on-site quality control campaigns for more than 60 PV plants, with an accumulated power of more than 300 MW, in close contact with Engineering, Procurement and Construction Contractors and financial entities. This paper presents the lessons learned from such experience.

Technical University, Almería (1976)

In collaboration with Julio Cano Lasso, M. Martín Escanciano and A. Más Guindal.

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.

Design and technical evaluation of an enhanced location-awareness service enabler for spatial disorientation management of elderly with mild cognitive impairment

The progressive ageing of population has turned the mild cognitive impairment (MCI) into a prevalent disease suffered by elderly. Consequently, the spatial disorientation has become a significant problem for older people and their caregivers. The ambient-assisted living applications are offering location-based services for empowering elderly to go outside and encouraging a greater independence. Therefore, this paper describes the design and technical evaluation of a location-awareness service enabler aimed at supporting and managing probable wandering situations of a person with MCI. Through the presence capabilities of the IP multimedia subsystem (IMS) architecture, the service will alert patient's contacts if a hazardous situation is detected depending on his location. Furthermore, information about the older person's security areas has been included in the user profile managed by IMS. In doing so, the service enabler introduced contribute to “context-awareness” paradigm allowing the adaptation and personalization of services depending on user's context and specific conditions or preferences.

Technical note: Comparison of automated ribosomal intergenic spacer analysis (ARISA) and denaturing gradient gel electrophoresis (DGGE) to assess bacterial diversity in the rumen of sheep

The aim of this study was to compare automated ribosomal intergenic spacer analysis (ARISA) and denaturing gradient gel electrophoresis (DGGE) techniques to assess bacterial diversity in the rumen of sheep. Sheep were fed 2 diets with 70% of either alfalfa hay or grass hay, and the solid (SOL) and liquid (LIQ) phases of the rumen were sampled immediately before feeding (0 h) and at 4 and 8 h postfeeding. Both techniques detected similar differences between forages, with alfalfa hay promoting greater (P < 0.05) bacterial diversity than grass hay. In contrast, whereas ARISA analysis showed a decrease (P < 0.05) of bacterial diversity in SOL at 4 h postfeeding compared with 0 and 8 h samplings, no variations (P > 0.05) over the postfeeding period were detected by DGGE. The ARISA technique showed lower (P < 0.05) bacterial diversity in SOL than in LIQ samples at 4 h postfeeding, but no differences (P > 0.05) in bacterial diversity between both rumen phases were detected by DGGE. Under the conditions of this study, the DGGE was not sensitive enough to detect some changes in ruminal bacterial communities, and therefore ARISA was considered more accurate for assessing bacterial diversity of ruminal samples. The results highlight the influence of the fingerprinting technique used to draw conclusions on factors affecting ruminal bacterial diversity.

Development of a method of assessment of the problem-solving competency at the Technical University of Madrid

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem solving competence. The first step has been to elaborate a guide for teachers to provide an homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provided the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem solving competence.

A vision based aerial rbot solution for the IARC 2014 by the Technical University of Madrid

The IARC competitions aim at making the state of the art in UAV progress. The 2014 challenge deals mainly with GPS/Laser denied navigation, Robot-Robot interaction and Obstacle avoidance in the setting of a ground robot herding problem. We present in this paper a drone which will take part in this competition. The platform and hardware it is composed of and the software we designed are introduced. This software has three main components: the visual information acquisition, the mapping algorithm and the Aritificial Intelligence mission planner. A statement of the safety measures integrated in the drone and of our efforts to ensure field testing in conditions as close as possible to the challenge?s is also included.

Reviewing technical approaches for sharing and preservation of experimental data

Empirical Software Engineering (ESE) replication researchers need to store and manipulate experimental data for several purposes, in particular analysis and reporting. Current research needs call for sharing and preservation of experimental data as well. In a previous work, we analyzed Replication Data Management (RDM) needs. A novel concept, called Experimental Ecosystem, was proposed to solve current deficiencies in RDMapproaches. The empirical ecosystem provides replication researchers with a common framework that integrates transparently local heterogeneous data sources. A typical situation where the Empirical Ecosystem is applicable, is when several members of a research group, or several research groups collaborating together, need to share and access each other experimental results. However, to be able to apply the Empirical Ecosystem concept and deliver all promised benefits, it is necessary to analyze the software architectures and tools that can properly support it.

Importancia de los modelos de conducta en la intención emprendedora en estudiantes de ingeniería = The importance of role models for the entrepreneurial intention of technical degrees students

El emprendimiento de base tecnológica es un tema crítico para la generación de crecimiento económico, por lo que conocer los determinantes de la intención emprendedora de estudiantes de universidades técnicas adquiere una especial relevancia. En este estudio se analiza la importancia de los modelos de conducta en la intención emprendedora entre los estudiantes de carreras técnicas. Los resultados muestran que los estudiantes de padres empresarios tienen una intención emprendedora superior a la media, mientras que los de hijos de padres funcionarios están por debajo de ella. Igualmente, la ausencia de modelos de conducta emprendedora en el entorno cercano disminuye la intención emprendedora, mientras que la ausencia de funcionarios no la hace aumentar.

Understanding the inventor’s mind through patent analysis: a clil team-teaching experience at the Technical University of Madrid

Describimos una iniciativa de enseñanza en equipo, basada en la metodología CLIL y aplicada recientemente en la Escuela Técnica Superior de Ingenieros Agrónomos de la Universidad Politécnica de Madrid. Dos profesoras—una ingeniera agrónoma y una lingüista, junto con cerca de 20 estudiantes de máster, analizamos una patente contrastándola con un artículo de investigación homólogo, escrito por los mismos autores sobre el mismo objeto tecnológico, y examinando sus diferentes contextos y consecuencias sociales. Con una duración de siete horas y media y un carácter eminentemente práctico, el seminario impartido no sólo se ha diseñado para proporcionar contenidos disciplinarios (agronómicos) y procedimentales (las estrategias propias de la escritura de patentes), sino también para suscitar sensibilidad hacia el lector y fomentar competencias transversales

GPS-PYMEs: Marco de Gestión de Proyectos para el desarrollo Seguro en PYMEs

En la actualidad no se concibe una empresa, por pequeña que esta sea, sin algún tipo de servicio TI. Se presenta para cada empresa el reto de emprender proyectos para desarrollar o contratar servicios de TI que soporten los diferentes procesos de negocio de la empresa. Por otro lado, a menos que los servicios de TI estén aislados de toda red, lo cual es prácticamente imposible en la actualidad, no existe un servicio o un proyecto que lo desarrolle garantizando el 100% de seguridad. Así la empresa maneja una dualidad entre desarrollar productos/servicios de TI seguros y el mantenimiento constante de sus servicios TI en estado seguro. La gestión de los proyectos para el desarrollo de los servicios de TI se aborda, en la mayoría de las empresas, aplicando distintas prácticas, utilizadas en otros proyectos y recomendadas, a tal efecto, por marcos y estándares con mayor reconocimiento. Por lo general, estos marcos incluyen, entre sus procesos, la gestión de los riesgos orientada al cumplimiento de plazos, de costes y, a veces, de la funcionalidad del producto o servicio. Sin embargo, en estas prácticas se obvian los aspectos de seguridad (confidencialidad, integridad y disponibilidad) del producto/servicio, necesarios durante el desarrollo del proyecto. Además, una vez entregado el servicio, a nivel operativo, cuando surge algún fallo relativo a estos aspectos de seguridad, se aplican soluciones ad-hoc. Esto provoca grandes pérdidas y, en ocasiones, pone en peligro la continuidad de la propia empresa. Este problema, se va acrecentando cada día más, en cualquier tipo de empresa y, son las PYMEs, por su la falta de conocimiento del problema en sí y la escasez de recursos metodológicos y técnicos, las empresas más vulnerables. Por todo lo anterior, esta tesis doctoral tiene un doble objetivo. En primer lugar, demostrar la necesidad de contar con un marco de trabajo que, integrado con otros posibles marcos y estándares, sea sencillo de aplicar en distintos tipos y envergaduras de proyectos, y que guíe a las PYMEs en la gestión de proyectos para el desarrollo seguro y posterior mantenimiento de la seguridad de sus servicios de TI. En segundo lugar, cubrir esta necesidad desarrollando un marco de trabajo que ofrezca un modelo de proceso genérico aplicable sobre distintos patrones de proyecto y una librería de activos de seguridad que sirva a las PYMEs de guía durante el proceso de gestión del proyecto para el desarrollo seguro. El modelo de proceso del marco propuesto describe actividades en los tres niveles organizativos de la empresa (estratégico, táctico y operativo). Está basado en el ciclo de mejora continua (PDCA) y en la filosofía Seguridad por Diseño, propuesta por Siemens. Se detallan las prácticas específicas de cada actividad, las entradas, salidas, acciones, roles, KPIs y técnicas aplicables para cada actividad. Estas prácticas específicas pueden aplicarse o no, a criterio del jefe de proyecto y de acuerdo al estado de la empresa y proyecto que se quiera desarrollar, estableciendo así distintos patrones de proceso. Para la validación del marco se han elegido dos PYMEs. La primera del sector servicios y la segunda del sector TIC. El modelo de proceso ha sido aplicado sobre un mismo patrón de proyecto que responde a necesidades comunes a ambas empresas. El patrón de proceso ha sido valorado en los proyectos elegidos en ambas empresas, antes y después de su aplicación. Los resultados del estudio, después de su aplicación en ambas empresas, han permitido la validación del patrón de proceso, en la mejora de la gestión de proyecto para el desarrollo seguro de TI en las PYMEs. ABSTRACT Today a company without any IT service is not conceived, even if it is small either. It presents the challenge for each company to undertake projects to develop or contract IT services that support the different business processes of the company. On the other hand, unless IT services are isolated from whole network, which is virtually impossible at present, there is no service or project, which develops guaranteeing 100% security. So the company handles a duality, develop products / insurance IT services and constant maintenance of their IT services in a safe state. The project management for the development of IT services is addressed, in most companies, using different practices used in other projects and recommended for this purpose by frameworks and standards with greater recognition. Generally, these frameworks include, among its processes, risk management aimed at meeting deadlines, costs and, sometimes, the functionality of the product or service. However, safety issues such as confidentiality, integrity and availability of the product / service, necessary for the project, they are ignored in these practices. Moreover, once the service delivered at the operational level, when a fault on these safety issues arise, ad-hoc solutions are applied. This causes great losses and sometimes threatens the continuity of the company. This problem is adding more every day, in any kind of business and SMEs are, by their lack of knowledge of the problem itself and the lack of methodological and technical resources, the most vulnerable companies. For all these reasons, this thesis has two objectives. Firstly demonstrate the need for a framework that integrated with other possible frameworks and standards, it is simple to apply in different types and wingspans of projects, and to guide SMEs in the management of development projects safely, and subsequent maintenance of the security of their IT services. Secondly meet this need by developing a framework that provides a generic process model applicable to project different patterns and a library of security assets, which serve to guide SMEs in the process of project management for development safe. The process model describes the proposed activities under the three organizational levels of the company (strategic, tactical and operational). It is based on the continuous improvement cycle (PDCA) and Security Design philosophy proposed by Siemens. The specific practices, inputs, outputs, actions, roles, KPIs and techniques applicable to each activity are detailed. These specific practices can be applied or not, at the discretion of the project manager and according to the state of the company and project that the company wants to develop, establishing different patterns of process. Two SMEs have been chosen to validate the frame work. The first of the services sector and the second in the ICT sector. The process model has been applied on the same pattern project that responds to needs common to both companies. The process pattern has been valued at the selected projects in both companies before and after application. The results of the study, after application in both companies have enabled pattern validation process, improving project management for the safe development of IT in SMEs.

A taste of the technical cuisine: metals and other ingredients

According to cognitive linguistics, language has an experiential origin based on perception, sensory motor activities and our knowledge of the world. Our thought operates by establishing similarities, links and associations that enable us to talk about one thing in terms of another as shown in the example of love as a journey (Lakoff and Johnson, 1980). Metaphor and metonymy are conceptual and linguistic tools that make possible most of these cognitive operations. Since metaphor is an essential element of human communication, the discourse of specialised disciplines includes metaphorical mappings and numerous examples of metaphorical expressions, for example in economics, where business is mapped in terms of war (White, 2004; Herrera & White, 2000), electrotechnics with electrical components understood as couples (Roldán- Riejos in preparation) or in civil engineering where a bridge is conceptualized as a person (Roldán-Riejos, 2013). In this paper, the metaphors: WORKING WITH METALS IS COOKING/ TRABAJAR CON METALES ES COCINAR and METALS ARE CULINARY OBJECTS/ LOS METALES SON OBJETOS CULINARIOS are explored. The main aim is to show that the cooking metaphor is widely spread in the metallurgical domain in English and Spanish, although with different nuances in each language due to socio-cultural factors. The method adopted consists of analysing examples taken from the: Bilingual Dictionary of Scientific and Technical Metaphors and Metonymies Spanish- English/English-Spanish, a forthcoming and rigorously documented bilingual dictionary that sums up research on conceptual, linguistic and visual metaphor and metonymy in different areas of engineering (Roldán-Riejos and Molina, 2013). The present paper studies in detail English and Spanish cross-linguistic correspondences related to types of metals and processes. It is suggested that they reflect synesthetic metaphoric mappings. The exploitation of cognitive conceptual metaphor in the ESP classroom is lastly recommended.

Labor risk prevention culture encouragement among students from building degree in the Technical University of Madrid

The influence of training in labor risk prevention and the development of the resulting pre-emptive culture are analyzed within this paper. In order to achieve this, a quantitative analysis of the students of Building Degree in the Technic University of Madrid has been developed. This study has been made in all grades, valuating the previous knowledge acquired during compulsory education. It must be kept in mind that the students in 3rd and 4th grade have received general and specific compulsory training in prevention and safety in the building sector.