Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller

In this paper, an intelligent control approach based on neuro-fuzzy systems performance is presented, with the objective of counteracting the vibrations that affect the low-cost vision platform onboard an unmanned aerial system of rotating nature. A scaled dynamical model of a helicopter is used to simulate vibrations on its fuselage. The impact of these vibrations on the low-cost vision system will be assessed and an intelligent control approach will be derived in order to reduce its detrimental influence. Different trials that consider a neuro-fuzzy approach as a fundamental part of an intelligent semi-active control strategy have been carried out. Satisfactory results have been achieved compared to those obtained by means of vibration reduction passive techniques.

Material, espacio y color en Mies van der Rohe. Café Samt & Seide: Hacia una Propuesta Estructural

La aparición de varias fotografías del Café Samt & Seide no publicadas hasta 2008 en las que se observaba la luz natural de la exposición; los planos a escala de la nave donde se realizó la exposición textil; y los croquis inéditos de la instalación de la seda localizados durante el transcurso de la Tesis Doctoral por el doctorando en el plano de la Sala de Cristal, han sido las principales aportaciones de la búsqueda documental que ha tenido por objeto el conocimiento espacial e interpretación gráfica del proyecto expositivo realizada durante el transcurso de la Tesis Doctoral para poder profundizar en el alcance de la propuesta protoarquitectónica y, a través de ella, en la obra y pensamiento de Mies van der Rohe. Material, espacio y color son elementos propuestos como capítulos que estructuran la disertación y que son empleados por Mies van der Rohe como factores de una nueva expresión espacial en la exposiciones como ensayos identificados con su idea de arquitectura. En el Café Samt & Seide, Mies van der Rohe y Lilly Reich proponen una sensibilidad en el empleo del material y color trasladada al espacio mediante una atmósfera rítmica y en movimiento de superficies abstraídas e iluminadas. La estructura visual de opuestos nace del doble material textil de la exposición desplegándose en un orden espacial y constructivo de elementos independientes iniciado en los apartamentos de la Colonia Weissenhof y Sala de Cristal de Stuttgart 1926-1927, y que será trasladado desde los espacios experimentales de 1927 a las series de mármoles y cristales del Pabellón Alemán 1928-1929. La síntesis intelectual (arte-ciencia-filosofía) guía el proceso de formalización y la técnica en una intención que será trasladada a su arquitectura en el empleo de la tecnología. La creatividad y repercusión de las vanguardias en la instalación muestra la voluntad integradora de la exposición y arquitectura como arte total. Los aspectos interpretativos de las artes plásticas, visuales y musicales se integran como criterios y sensibilidades aplicadas a las estructuras yuxtapuestas material, espacial y de color. Modernidad y tradición tectónica convergen en este espacio construido cuyas superficies cubren un armazón metálico oculto. La construcción mínima textil será incorporada como idea de forma en la futura construcción del pilar metálico, la pared flotante de sus viviendas y pabellones abiertos a la naturaleza, y la gran fachada tecnológica del espacio público de sus agrupaciones en la ciudad. El espacio total del Café Samt & Seide dentro de la gran nave de Berlín anticipa las exposiciones artísticas e industriales realizadas junto a Lilly Reich en el interior de las espaciosas salas de estructura metálica como instalaciones conceptuales de gravedad y luz antecedentes de los pabellones de grandes dimensiones y espacio universal. Arquitectura, construcción y lugar son integrados en la instalación por el principio estructural como propuesta de una idea de arquitectura que es desarrollada en las exposiciones. Oscilador y bastidor son construcciones escaladas dentro de la gran nave iluminada, expresando el conjunto un orden de partes que reflejan un todo integrado en la naturaleza y lo universal. Las múltiples relaciones espaciales, constructivas y conceptuales de la exposición con su arquitectura desvelan al Café Samt & Seide como un exponente y antecedente de su obra e idea a la que definió como una propuesta estructural. La estructura, entendida como un conjunto de valores culturales y medios técnicos, es el concepto con el que Mies van der Rohe identifica la síntesis intelectualtecnológica de su tiempo, constituyendo la finalidad de su expresión material, espacial y de color. ABSTRACT The unpublished pictures of the Café Samt & Seide appeared in 2008 in which the natural light in the exhibition can be seen; the scaled plan of the nave where the textile exhibition was held; and the unpublished sketches of the silk exhibition located by the doctoral candidate while preparing his dissertation have been the main input of the data search aiming at a better understanding of the space and a graphic interpretation of the exhibition project made by the doctoral candidate during the dissertation as a basic requirement to deepen in the scope of this protoarchitectural proposal and, though it, into Mies van der Rohe’s work and thinking. Material, space and colour are the elements put forward as the chapters structuring this dissertation and were used by Mies van der Rohe as factors of a new spatial expression in expositions as tests identified with his idea of architecture. In Café Samt & Seide, Mies van der Rohe and Lilly Reich present material and colour sensitivity transferred to space though a rhythmic and moving atmosphere made up by abstracted and lit surfaces. Such a visual grammar and oppositions unfolds into a space and constructive order of independent elements originated with the apartments of the Weissenhof Colony and Glass Room in Stuttgart 1926-1927, and which were transferred these test spaces 1927 to the series of marble and glass in the German Pavilion 1928-1929. The intellectual and formal will (art-science-philosophy) guides the technical expression, which is transferred to architecture through technology. The creativity and impact of avant-gardes in the installation reflects exhibition and architecture’s will to integrate as a Total Art. The interpretative aspects of plastic, visual and musical arts are part of a sensitivity applied to the overlapped structures of material, space and colour. Tectonic modernity and tradition converge in this space built with surfaces covering a hidden metal framework. The minimal textile construction is integrated as a shape idea in his subsequent construction of the metal pillar, floating wall in his housing and pavilions open to nature, and the great technological façade of the public space of his urban clusters. The total space of the exhibition inside the great nave in Berlin anticipates the artistic and industrial exhibitions done together with Lilly Reich inside the spacious Halls built with exposed metal structures as conceptual installation of gravity and light prior to the big-dimensioned pavilions and universal space. Architecture, construction and place are integrated by the structural principle. Oscillator and framework are scaled constructions integrated inside the great, lit nave, and the whole conveys order of its parts reflecting a whole integrated in nature and the universal. The many conceptual, space and constructive link of the textile exhibition to his European and American architecture add a greater knowledge of the time when Mies van der Rohe stated he gained a “new awareness” 1926, revealing Café Samt & Seide as a valuable example and the experimental precursor of his work and idea defined by himself as a “structural proposal”. The structure, understood as a set of cultural and material values expressed by architecture, is the notion used by Mies van der Rohe to identify the intellectual-technological synthesis as the idea of a time and which is the goal of its material, space and colour expression.

Estudio en modelo físico a escala reducida de la viabilidad del empleo de buques fondeados como diques flotantes para abrigo portuario y defensa de costas

Los diques flotantes son estructuras que atenúan la energía del oleaje fundamentalmente por reflexión y turbulencia. Aunque presentan importantes ventajas en términos constructivos y medioambientales, su efectividad es limitada y en la práctica sólo se emplean en condiciones climáticas propias de zonas con oleajes poco energéticos. Por otro lado, el buque es la estructura flotante por excelencia y su empleo para el abrigo portuario y costero en determinadas situaciones puede aportar las ventajas propias de los diques flotantes, al tiempo que ampliar el rango de oleajes frente a los que estas estructuras son efectivas. El propósito de esta Tesis Doctoral es evaluar la viabilidad del empleo de buques fondeados como diques flotantes para el abrigo portuario y costero. Para ello, se han realizado ensayos en modelo físico a escala reducida en un canal de oleaje del Centro de Estudios de Puertos y Costas (CEPYC), con el objeto de determinar los coeficientes de transmisión (Ct), reflexión (Cr) y disipación (Cd) de barcos de diversas tipologías y dimensiones, sometidos a diferentes oleajes en distintas situaciones de carga, fondeo y profundidad del emplazamiento. La efectividad de los buques empleados en los ensayos se ha determinado mediante el análisis de dichos coeficientes y su variación con la altura de ola y el periodo de los oleajes incidentes. Además, se han registrado las fuerzas existentes en las cadenas de fondeo con objeto de comprobar la viabilidad del mismo y facilitar una estimación del diámetro de las cadenas que serían necesarias en cada situación. Posteriormente, se han aplicado los resultados obtenidos en los ensayos en modelo físico reducido a dos situaciones de abrigo portuario y costero. La primera aplicación consiste en el empleo de buques como defensa temporal en fases constructivas por medios marítimos, partiendo de la hipótesis de que, actuando como diques flotantes, puede proteger la zona de la obra y ampliar las ventanas temporales de periodos de actividad en obra marítima. Las actividades que se han analizado son las de dragado de fondos, vertidos de material granular y transporte y fondeo de cajones flotantes para diques y muelles. La segunda aplicación estudiada es el empleo de buques para la protección costera y la formación de salientes y tómbolos. Los coeficientes de transmisión obtenidos se han introducido en formulaciones analíticas que permiten prever la evolución de la costa frente a la protección procurada por el buque actuando como dique flotante exento. Finalmente se han redactado las conclusiones de la investigación y se han propuesto nuevas líneas de investigación relacionadas con esta Tesis Doctoral. Floating breakwaters are structures which attenuate wave energy mainly by reflection and turbulence. They display advantages in terms of construction and ecology, amongst others. However, their use is restricted in practice to certain areas with good climatic conditions and low energy waves. Moreover, ships are the most common floating structures and their use for port and coastal shelter in certain situations could widen the range of applicability in addition to the rest of advantages of floating breakwaters. The purpose of this research is to assess the feasibility of ships anchored as floating breakwaters for port and coastal protection. To that end, tests in a scaled down physical model have been conducted in a wave flume in the Centre of Port and Coastal Studies (CEPYC), in order to determine the transmission (Ct), reflection (Cr) and dissipation (Cd) coefficients of ships of diverse types and dimensions, under different wave, load, anchoring and depth conditions. The effectiveness of the several ships used in the tests has been determined by analyzing these coefficients and their variation with the wave height and period of the incident waves. In addition, the existing forces in the anchor chains have been registered to verify the feasibility of the anchoring systems, as well as to provide an estimation of the diameter of the chains that would be needed in each situation. Subsequently, the results of the tests have been applied to two situations of port and coastal protection. The first one is the use of ships as a temporary defense for maritime works with construction phases by maritime means, on the assumption that, acting as floating breakwaters, they can protect the work area and increase the time windows of periods of activity in maritime works. Dredging, dumping of granular material and transport and positioning of big concrete caissons for docks and breakwaters were the activities analyzed. The second situation is the use of ships for coastal protection and forming salients of sand or tombolos. Some analytical formulations which take into account the transmission coefficients from the tests have been used to predict the evolution of the coastline under the protection given by the ships acting as detached floating breakwaters. Finally, the conclusions of the research have been addressed and the proposal of new lines of work related to the topic has been made.

Análisis de la distribución espacial de los parámetros acústicos en recintos

El principal objetivo de este estudio es la evaluación de la distribución espacial de los parámetros acústicos en un recinto a través de la aplicación de técnicas geoestadísticas como el método Kriging. Mediante el uso de la herramienta de análisis espacial ArcMap, perteneciente a la plataforma ArcGIS, se ha analizado el comportamiento acústico del Salón de Actos común a la Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación (ETSIST) y la Escuela Técnica Superior de Ingeniería de Sistemas Informáticos (ETSISI), ambas situadas en el Campus Sur de la Universidad Politécnica de Madrid. Se han realizado mediciones in-situ del recinto no ocupado utilizando la herramienta de medición DIRAC Room Acoustics y el método de la respuesta impulsiva integrada, extrayéndose los parámetros acústicos de tiempo de reverberación (RT), tiempo de reverberación inicial (EDT), fuerza sonora relativa (Grel), claridad (C80), tiempo central (Ts), definición (D50) e Índice de Transmisión Rápida de la Palabra (RASTI). Se ha analizado la adecuación de los valores observados de Grel, C80 y Ts al modelo teórico de Barron y estimado, mediante el método Kriging Ordinario, el conjunto de parámetros medidos en el recinto, obteniéndose los semivariograma y mapas de estimación correspondientes. Además, se ha evaluado la calidad de la estimación en base a un número de puntos de medición reducido. A la vista de los resultados obtenidos, en general, el método Kriging puede considerarse un buen interpolador de los parámetros acústicos en un recinto, observándose que los parámetros que evalúan relaciones energéticas, especialmente la fuerza sonora relativa (Grel) proporcionan mejores estimaciones en comparación con aquellos relacionados con la reverberación y la inteligibilidad del habla. El coeficiente de determinación (R2) constituye una medida útil para evaluar la precisión de la estimación. Además, la entropía de los datos observados puede ser un buen indicador a priori de la precisión de la estimación. Asimismo, se ha demostrado que, basándose en un reducido número de puntos de medición, es posible obtener una estimación precisa de los parámetros acústicos de fuerza sonora relativa (Grel) y tiempo central (Ts). ABSTRACT. This project aims to evaluate the feasibility of using geostatistical techniques such as Kriging on the analysis of the spatial distribution of the acoustic parameters in rooms. The acoustic behaviour of the Assembly Hall of the ETSIST and ETSISI (Universidad Politécnica de Madrid) is investigated using ArcMap, which is the main component of ArcGIS suite of geospatial processing programs. For this purpose, in-situ acoustic measurements are carried out in the unoccupied room using DIRAC Room Acoustics software. The following acoustic parameters are measured by means of the integrated impulse response method for further examination: Reverberation Time (RT), Early Decay Time (EDT), Relative Strength (Grel), Clarity (C80), Centre Time (Ts), Definition (D50) and Rapid Speech Transmission Index (RASTI). Goodness-of-fit of measured Grel, C80 and Ts values to Barron’s theory is determined and Ordinary Kriging is applied to all the measured parameters in order to calculate the semivariogram and prediction surfaces. The prediction performance is also analysed when significantly fewer receiver positions are used for the prediction. The experimental results obtained lead to conclude that Kriging can be successfully applied to room acoustics. Energy\based acoustic parameters can be estimated with higher accuracy compared to those related to reverberation and speech intelligibility. Coefficient of determination (R2) is a reliable statistic for assessing the prediction accuracy, for which measured data entropy can also be a good a priori indicator. Furthermore, based on fewer receiver positions, it is demonstrated that accurate predictions of Grel and Ts can be achieved.

Nueva tecnología para la separación de gases atmosféricos y captura de dióxido de carbono por aplicación de campos electromagnéticos y fotoionización

Son numerosos los expertos que predicen que hasta pasado 2050 no se utilizarán masivamente las energías de origen renovable, y que por tanto se mantendrá la emisión de dióxido de carbono de forma incontrolada. Entre tanto, y previendo que este tipo de uso se mantenga hasta un horizonte temporal aún más lejano, la captura, concentración y secuestro o reutilización de dióxido de carbono es y será una de las principales soluciones a implantar para paliar el problema medioambiental causado. Sin embargo, las tecnologías existentes y en desarrollo de captura y concentración de este tipo de gas, presentan dos limitaciones: las grandes cantidades de energía que consumen y los grandes volúmenes de sustancias potencialmente dañinas para el medioambiente que producen durante su funcionamiento. Ambas razones hacen que no sean atractivas para su implantación y uso de forma extensiva. La solución planteada en la presente tesis doctoral se caracteriza por la ausencia de residuos producidos en la operación de captura y concentración del dióxido de carbono, por no utilizar substancias químicas y físicas habituales en las técnicas actuales, por disminuir los consumos energéticos al carecer de sistemas móviles y por evitar la regeneración química y física de los materiales utilizados en la actualidad. Así mismo, plantea grandes retos a futuras innovaciones sobre la idea propuesta que busquen fundamentalmente la disminución de la energía utilizada durante su funcionamiento y la optimización de sus componentes principales. Para conseguir el objetivo antes citado, la presente tesis doctoral, una vez establecido el planteamiento del problema al que se busca solución (capítulo 1), del estudio de las técnicas de separación de gases atmosféricos utilizadas en la actualidad, así como del de los sistemas fundamentales de las instalaciones de captura y concentración del dióxido de carbono (capítulo 2) y tras una definición del marco conceptual y teórico (capítulo 3), aborda el diseño de un prototipo de ionización fotónica de los gases atmosféricos para su posterior separación electrostática, a partir del estudio, adaptación y mejora del funcionamiento de los sistemas de espectrometría de masas. Se diseñarán y desarrollarán los sistemas básicos de fotoionización, mediante el uso de fuentes de fotones coherentes, y los de separación electrostática (capítulo 4), en que se basa el funcionamiento de este sistema de separación de gases atmosféricos y de captura y concentración de dióxido de carbono para construir un prototipo a nivel laboratorio. Posteriormente, en el capítulo 5, serán probados utilizando una matriz experimental que cubra los rangos de funcionamiento previstos y aporte suficientes datos experimentales para corregir y desarrollar el marco teórico real, y con los que se pueda establecer y corregir un modelo físico– matemático de simulación (capítulo 6) aplicable a la unidad en su conjunto. Finalmente, debido a la utilización de unidades de ionización fotónica, sistemas láseres intensos y sistemas eléctricos de gran potencia, es preciso analizar el riesgo biológico a las personas y al medioambiente debido al impacto de la radiación electromagnética producida (capítulo 7), minimizando su impacto y cumpliendo con la legislación vigente. En el capítulo 8 se planteará un diseño escalable a tamaño piloto de la nueva tecnología propuesta y sus principales modos de funcionamiento, así como un análisis de viabilidad económica. Como consecuencia de la tesis doctoral propuesta y del desarrollo de la unidad de separación atmosférica y de captura y concentración de dióxido de carbono, surgen diversas posibilidades de estudio que pueden ser objeto de nuevas tesis doctorales y de futuros desarrollos de ingeniería. El capítulo 9 tratará de incidir en estos aspectos indicando líneas de investigación para futuras tesis y desarrollos industriales. ABSTRACT A large number of experts predict that until at least 2050 renewable energy sources will not be massively used, and for that reason, current Primary Energy sources based on extensive use of fossil fuel will be used maintaining out of control emissions, Carbon Dioxide above all. Meanwhile, under this scenario and considering its extension until at least 2050, Carbon Capture, Concentration, Storage and/or Reuse is and will be one of the main solutions to minimise Greenhouse Gasses environmental effect. But, current Carbon Capture and Storage technology state of development has two main problems: it is a too large energy consuming technology and during normal use it produces a large volume of environmentally dangerous substances. Both reasons are limiting its development and its extensive use. This Ph Degree Thesis document proposes a solution to get the expected effect using a new atmospheric gasses separation system with the following characteristics: absence of wastes produced, it needs no chemical and/or physical substances during its operation, it reduces to minimum the internal energy consumptions due to absence of mobile equipment and it does not need any chemical and/or physical regeneration of substances. This system is beyond the State of the Art of current technology development. Additionally, the proposed solution raises huge challenges for future innovations of the proposed idea finding radical reduction of internal energy consumption during functioning, as well as regarding optimisation of main components, systems and modes of operation. To achieve this target, once established the main problem, main challenge and potential solving solutions (Chapter 1), it is established an initial starting point fixing the Atmospheric Gasses Separation and Carbon Capture and Storage developments (Chapter 2), as well as it will be defined the theoretical and basic model, including existing and potential new governing laws and mathematical formulas to control its system functioning (Chapter 3), this document will deal with the design of an installation of an operating system based on photonic ionization of atmospheric gasses to be separated in a later separation system based on the application of electrostatic fields. It will be developed a basic atmospheric gasses ionization prototype based on intense radioactive sources capable to ionize gasses by coherent photonic radiation, and a basic design of electrostatic separation system (Chapter 4). Both basic designs are the core of the proposed technology that separates Atmospheric Gasses and captures and concentrates Carbon Dioxide. Chapter 5 will includes experimental results obtained from an experimental testing matrix covering expected prototype functioning regimes. With the obtained experimental data, theoretical model will be corrected and improved to act as the real physical and mathematical model capable to simulate real system function (Chapter 6). Finally, it is necessary to assess potential biological risk to public and environment due to the proposed use of units of intense energy photonic ionization, by laser beams or by non–coherent sources and large electromagnetic systems with high energy consumption. It is necessary to know the impact in terms of and electromagnetic radiation taking into account National Legislation (Chapter 7). On Chapter 8, an up scaled pilot plant will be established covering main functioning modes and an economic feasibility assessment. As a consequence of this PhD Thesis, a new field of potential researches and new PhD Thesis are opened, as well as future engineering and industrial developments (Chapter 9).

High-quality conforming hexahedral meshes of patient-specific abdominal aortic aneurysms including their intraluminal thrombi

In order to perform finite element (FE) analyses of patient-specific abdominal aortic aneurysms, geometries derived from medical images must be meshed with suitable elements. We propose a semi-automatic method for generating conforming hexahedral meshes directly from contours segmented from medical images. Magnetic resonance images are generated using a protocol developed to give the abdominal aorta high contrast against the surrounding soft tissue. These data allow us to distinguish between the different structures of interest. We build novel quadrilateral meshes for each surface of the sectioned geometry and generate conforming hexahedral meshes by combining the quadrilateral meshes. The three-layered morphology of both the arterial wall and thrombus is incorporated using parameters determined from experiments. We demonstrate the quality of our patient-specific meshes using the element Scaled Jacobian. The method efficiently generates high-quality elements suitable for FE analysis, even in the bifurcation region of the aorta into the iliac arteries. For example, hexahedral meshes of up to 125,000 elements are generated in less than 130 s, with 94.8 % of elements well suited for FE analysis. We provide novel input for simulations by independently meshing both the arterial wall and intraluminal thrombus of the aneurysm, and their respective layered morphologies.

Selected papers from OECD-NEA PSBT benchmark

Historically, the prediction of safety margins has been based on system level thermal-hydraulic calculations employing suitable empirical formulations for assembly specific geometries and fuel-element grid spacers. These works have assessed response, margins, and consequences for the system based on one-dimensional two-fluid or drift-flux type thermalhydraulics formulations with fuel-vendor specific hydraulic losses and heat transfer characteristics for various fuel assemblies, including the so-called hot channel. Analysis of the hot channel gives important information on flow rates, fuel element centerline temperature, fuel sheath temperature, and margin to the departure from nucleate boiling. Given the reliance of the above approaches on empirical formulations obtained from complex and often difficult experiments, there is significant interest in obtaining reliable and accurate results from computation tools which employ more fundamental empirical relationships which can be obtained from subsets of the domain or from other scaled experiments.

Crop rotation and residues influence N2O emission and N efficiency rather than tillage under a rainfed Mediterranean agroecosystem

Conservation tillage and crop rotation have spread during the last decades because promotes several positive effects (increase of soil organic content, reduction of soil erosion, and enhancement of carbon sequestration) (Six et al., 2004). However, these benefits could be partly counterbalanced by negative effects on the release of nitrous oxide (N2O) (Linn and Doran, 1984). There is a lack of data on long-term tillage system study, particularly in Mediterranean agro-ecosystems. The aim of this study was to evaluate the effects of long-term (>17 year) tillage systems (no tillage (NT), minimum tillage (MT) and conventional tillage (CT)); and crop rotation (wheat (W)-vetch (V)-barley (B)) versus wheat monoculture (M) on N2O emissions. Additionally, Yield-scaled N2O emissions (YSNE) and N uptake efficiency (NUpE) were assessed for each treatment.

Diffusion of photovoltaic in Germany: roles of policy, system suppliers and adopters

In some countries photovoltaic (PV) technology is at a stage of development at which it can compete with conventional electricity sources. A case in point is Germany where PV market has reached a mature stage. As a manifest of this, the German government has recently reduced the feed-in-tariff, which had been the strongest driver of PV diffusion. This development raises a fundamental question: Why would potential adopters be motivated to adopt PV when feed-in tariff diminishes? The point of departure for the literature on diffusion of PV has been on the effect of subsidies but little attention has paid to adopter motives when the policy support is scaled down. This paper presents an in-depth analysis of the adopter motives for photovoltaic applications. Anchored in an extensive exploratory case study we provide an encompassing explanation of roles of policy, adopters and system suppliers on diffusion of PV.

Quasi-cylindrical approximation to the swirling flow in an atomizer chamber

A quasi-cylindrical approximation is used to analyse the axisymmetric swirling flow of a liquid with a hollow air core in the chamber of a pressure swirl atomizer. The liquid is injected into the chamber with an azimuthal velocity component through a number of slots at the periphery of one end of the chamber, and flows out as an anular sheet through a central orifice at the other end, following a conical convergence of the chamber wall. An effective inlet condition is used to model the effects of the slots and the boundary layer that develops at the nearby endwall of the chamber. An analysis is presented of the structure of the liquid sheet at the end of the exit orifice, where the flow becomes critical in the sense that upstream propagation of long-wave perturbations ceases to be possible. This nalysis leads to a boundary condition at the end of the orifice that is an extension of the condition of maximum flux used with irrotational models of the flow. As is well known, the radial pressure gradient induced by the swirling flow in the bulk of the chamber causes the overpressure that drives the liquid towards the exit orifice, and also leads to Ekman pumping in the boundary layers of reduced azimuthal velocity at the convergent wall of the chamber and at the wall opposite to the exit orifice. The numerical results confirm the important role played by the boundary layers. They make the thickness of the liquid sheet at the end of the orifice larger than predicted by rrotational models, and at the same time tend to decrease the overpressure required to pass a given flow rate through the chamber, because the large axial velocity in the boundary layers takes care of part of the flow rate. The thickness of the boundary layers increases when the atomizer constant (the inverse of a swirl number, proportional to the flow rate scaled with the radius of the exit orifice and the circulation around the air core) decreases. A minimum value of this parameter is found below which the layer of reduced azimuthal velocity around the air core prevents the pressure from increasing and steadily driving the flow through the exit orifice. The effects of other parameters not accounted for by irrotational models are also analysed in terms of their influence on the boundary layers.

Management of irrigation frequency and nitrogen fertilization to mitigate GHG and NO emissions from drip-fertigated crops

Drip irrigation combined with split application of fertilizer nitrogen (N) dissolved in the irrigation water (i.e. drip fertigation) is commonly considered best management practice for water and nutrient efficiency. As a consequence, its use is becoming widespread. Some of the main factors (water-filled pore space, NH4+ and NO3−) regulating the emissions of greenhouse gases (i.e. N2O, CO2 and CH4) and NO from agroecosystems can easily be manipulated by drip fertigation without yield penalties. In this study, we tested management options to reduce these emissions in a field experiment with a melon (Cucumis melo L.) crop. Treatments included drip irrigation frequency (weekly/daily) and type of N fertilizer (urea/calcium nitrate) applied by fertigation. Crop yield, environmental parameters, soil mineral N concentrations and fluxes of N2O, NO, CH4 and CO2 were measured during 85 days. Fertigation with urea instead of calcium nitrate increased N2O and NO emissions by a factor of 2.4 and 2.9, respectively (P < 0.005). Daily irrigation reduced NO emissions by 42% (P < 0.005) but increased CO2 emissions by 21% (P < 0.05) compared with weekly irrigation. We found no relation between irrigation frequency and N2O emissions. Based on yield-scaled Global Warming Potential as well as NO cumulative emissions, we conclude that weekly fertigation with a NO3−-based fertilizer is the best option to combine agronomic productivity with environmental sustainability. Our study shows that adequate management of drip fertigation, while contributing to the attainment of water and food security, may provide an opportunity for climate change mitigation.

Shake-table tests of a reinforced concrete frame designed following modern codes: seismic performance and damage evaluation

This paper presents shake-table tests conducted on a two-fifths-scale reinforced concrete frame representing a conventional construction design under current building code provisions in the Mediterranean area. The structure was subjected to a sequence of dynamic tests including free vibrations and four seismic simulations in which a historical ground motion record was scaled to levels of increasing intensity until collapse. Each seismic simulation was associated with a different level of seismic hazard, representing very frequent, frequent, rare and very rare earthquakes. The structure remained basically undamaged and within the inter-story drift limits of the "immediate occupancy" performance level for the very frequent and frequent earthquakes. For the rare earthquake, the specimen sustained significant damage with chord rotations of up to 28% of its ultimate capacity and approached the upper bound limit of inter-story drift associated with "life safety". The specimen collapsed at the beginning of the "very rare" seismic simulation. Besides summarizing the experimental program, this paper evaluates the damage quantitatively at the global and local levels in terms of chord rotation and other damage indexes, together with the energy dissipation demands for each level of seismic hazard. Further, the ratios of column-to-beam moment capacity recommended by Eurocode 8 and ACI-318 to guarantee the formation of a strong column-weak beam mechanism are examined.

Inelastic torsional seismic response of nominally symmetric reinforced concrete frame structures: shaking table tests

This paper discusses the torsional response of a scaled reinforced concrete frame structure subjected to several uniaxial shaking table tests. The tested structure is nominally symmetric in the direction of shaking and exhibits torsion attributable to non-uniform yielding of structural components and uncertainties in the building process. Asymmetric behavior is analyzed in terms of displacement, strain in reinforcing bars, energy dissipated at plastic hinges, and damage at section and frame levels. The results show that for low levels of seismic hazard, for which the structure is expected to perform basically within the elastic range, the accidental eccentricity is not a concern for the health of the structure, but it significantly increases the lateral displacement demand in the frames (about 30%) and this might cause significant damage to non-structural components. For high levels of seismic hazard the effects of accidental torsion become less important. These results underline the need to consider accidental eccentricity in evaluating the performance of a structure for very frequent or frequent earthquakes, and suggest that consideration of torsion may be neglected for performance levels associated with rare or very rare earthquakes.

Geometría de presas bóveda

Se presenta en este artículo un programa para cálculo mediante ordenador, de utilización frecuente en el Departamento de Estudios Experimentales de Presas del Labo¬ratorio Central. Este programa se refiere a presas bóvedas asimétricas de tres centros y determina: a) el replanteo geométrico de las mismas para su construcción en modelo reducido. b) la posición -punto de aplicación y dirección- de las cargas puntuales equivalentes a las acciones de peso propio y presión hidrostática, que se introducen en el modelo median¬te gatos hidráulicos. c) la directriz de la presa, dato necesario para un posible cálculo estático posterior. This paper presents a computer program currently used in the Department of Experimental Studies of Dams in the Laboratorio Central. This program concerns asymmetric arch dams of three centers and it determines: a) The geometrical definition of the arch dams for the scaled model construction. b) The position, acting point and direction of the punctual loads equivalent to the actions of self-weight and water pressure, which are applied to the model by means of hydraulic jacks. c) The middle surface of the dam, which later would be introduced for a stress analy¬sis of the dam itself

Gravitational actions upon a tether in a non-uniform gravity field with arbitrary number of zonal harmonics

We develop general closed-form expressions for the mutual gravitational potential, resultant and torque acting upon a rigid tethered system moving in a non-uniform gravity field produced by an attracting body with revolution symmetry, such that an arbitrary number of zonal harmonics is considered. The final expressions are series expansion in two small parameters related to the reference radius of the primary and the length of the tether, respectively, each of which are scaled by the mutual distance between their centers of mass. A few numerical experiments are performed to study the convergence behavior of the final expressions, and conclude that for high precision applications it might be necessary to take into account additional perturbation terms, which come from the mutual Two-Body interaction.