Analysing the Impact of Consumer Tendency in HORECA Distribution Models

With increasing complexity of today's consumer requirements, food industry decision makers should be able to respond to consumer needs much faster than ever before. The preliminary studies showed that for improving the performance and selecting suitable distribution models, decision makers in food industries should classify different types of consumers and based on the classification prepare different distributions flows. By studying the HORECA distribution channel, this paper suggest that, logistics decision makers should investigate the relationship between consumers' characteristics and urban freight distribution strategy in order to respond to the exact needs and in the follow to reduce the logistics cost.

A Fuzzy approach based on dynamic programming and metaheuristics for selecting safeguards for risk management for information systems

In this paper we focus on the selection of safeguards in a fuzzy risk analysis and management methodology for information systems (IS). Assets are connected by dependency relationships, and a failure of one asset may affect other assets. After computing impact and risk indicators associated with previously identified threats, we identify and apply safeguards to reduce risks in the IS by minimizing the transmission probabilities of failures throughout the asset network. However, as safeguards have associated costs, the aim is to select the safeguards that minimize costs while keeping the risk within acceptable levels. To do this, we propose a dynamic programming-based method that incorporates simulated annealing to tackle optimizations problems.

Evaluation of configurations of supply networks supported by it systems

Los sistemas transaccionales tales como los programas informáticos para la planificación de recursos empresariales (ERP software) se han implementado ampliamente mientras que los sistemas analíticos para la gestión de la cadena de suministro (SCM software) no han tenido el éxito deseado por la industria de tecnología de información (TI). Aunque se documentan beneficios importantes derivados de las implantaciones de SCM software, las empresas industriales son reacias a invertir en este tipo de sistemas. Por una parte esto es debido a la falta de métodos que son capaces de detectar los beneficios por emplear esos sistemas, y por otra parte porque el coste asociado no está identificado, detallado y cuantificado suficientemente. Los esquemas de coordinación basados únicamente en sistemas ERP son alternativas válidas en la práctica industrial siempre que la relación coste-beneficio esta favorable. Por lo tanto, la evaluación de formas organizativas teniendo en cuenta explícitamente el coste debido a procesos administrativos, en particular por ciclos iterativos, es de gran interés para la toma de decisiones en el ámbito de inversiones en TI. Con el fin de cerrar la brecha, el propósito de esta investigación es proporcionar métodos de evaluación que permitan la comparación de diferentes formas de organización y niveles de soporte por sistemas informáticos. La tesis proporciona una amplia introducción, analizando los retos a los que se enfrenta la industria. Concluye con las necesidades de la industria de SCM software: unas herramientas que facilitan la evaluación integral de diferentes propuestas de organización. A continuación, la terminología clave se detalla centrándose en la teoría de la organización, las peculiaridades de inversión en TI y la tipología de software de gestión de la cadena de suministro. La revisión de la literatura clasifica las contribuciones recientes sobre la gestión de la cadena de suministro, tratando ambos conceptos, el diseño de la organización y su soporte por las TI. La clasificación incluye criterios relacionados con la metodología de la investigación y su contenido. Los estudios empíricos en el ámbito de la administración de empresas se centran en tipologías de redes industriales. Nuevos algoritmos de planificación y esquemas de coordinación innovadoras se desarrollan principalmente en el campo de la investigación de operaciones con el fin de proponer nuevas funciones de software. Artículos procedentes del área de la gestión de la producción se centran en el análisis de coste y beneficio de las implantaciones de sistemas. La revisión de la literatura revela que el éxito de las TI para la coordinación de redes industriales depende en gran medida de características de tres dimensiones: la configuración de la red industrial, los esquemas de coordinación y las funcionalidades del software. La literatura disponible está enfocada sobre todo en los beneficios de las implantaciones de SCM software. Sin embargo, la coordinación de la cadena de suministro, basándose en el sistema ERP, sigue siendo la práctica industrial generalizada, pero el coste de coordinación asociado no ha sido abordado por los investigadores. Los fundamentos de diseño organizativo eficiente se explican en detalle en la medida necesaria para la comprensión de la síntesis de las diferentes formas de organización. Se han generado varios esquemas de coordinación variando los siguientes parámetros de diseño: la estructura organizativa, los mecanismos de coordinación y el soporte por TI. Las diferentes propuestas de organización desarrolladas son evaluadas por un método heurístico y otro basado en la simulación por eventos discretos. Para ambos métodos, se tienen en cuenta los principios de la teoría de la organización. La falta de rendimiento empresarial se debe a las dependencias entre actividades que no se gestionan adecuadamente. Dentro del método heurístico, se clasifican las dependencias y se mide su intensidad basándose en factores contextuales. A continuación, se valora la idoneidad de cada elemento de diseño organizativo para cada dependencia específica. Por último, cada forma de organización se evalúa basándose en la contribución de los elementos de diseño tanto al beneficio como al coste. El beneficio de coordinación se refiere a la mejora en el rendimiento logístico - este concepto es el objeto central en la mayoría de modelos de evaluación de la gestión de la cadena de suministro. Por el contrario, el coste de coordinación que se debe incurrir para lograr beneficios no se suele considerar en detalle. Procesos iterativos son costosos si se ejecutan manualmente. Este es el caso cuando SCM software no está implementada y el sistema ERP es el único instrumento de coordinación disponible. El modelo heurístico proporciona un procedimiento simplificado para la clasificación sistemática de las dependencias, la cuantificación de los factores de influencia y la identificación de configuraciones que indican el uso de formas organizativas y de soporte de TI más o menos complejas. La simulación de eventos discretos se aplica en el segundo modelo de evaluación utilizando el paquete de software ‘Plant Simulation’. Con respecto al rendimiento logístico, por un lado se mide el coste de fabricación, de inventario y de transporte y las penalizaciones por pérdida de ventas. Por otro lado, se cuantifica explícitamente el coste de la coordinación teniendo en cuenta los ciclos de coordinación iterativos. El método se aplica a una configuración de cadena de suministro ejemplar considerando diversos parámetros. Los resultados de la simulación confirman que, en la mayoría de los casos, el beneficio aumenta cuando se intensifica la coordinación. Sin embargo, en ciertas situaciones en las que se aplican ciclos de planificación manuales e iterativos el coste de coordinación adicional no siempre conduce a mejor rendimiento logístico. Estos resultados inesperados no se pueden atribuir a ningún parámetro particular. La investigación confirma la gran importancia de nuevas dimensiones hasta ahora ignoradas en la evaluación de propuestas organizativas y herramientas de TI. A través del método heurístico se puede comparar de forma rápida, pero sólo aproximada, la eficiencia de diferentes formas de organización. Por el contrario, el método de simulación es más complejo pero da resultados más detallados, teniendo en cuenta parámetros específicos del contexto del caso concreto y del diseño organizativo. ABSTRACT Transactional systems such as Enterprise Resource Planning (ERP) systems have been implemented widely while analytical software like Supply Chain Management (SCM) add-ons are adopted less by manufacturing companies. Although significant benefits are reported stemming from SCM software implementations, companies are reluctant to invest in such systems. On the one hand this is due to the lack of methods that are able to detect benefits from the use of SCM software and on the other hand associated costs are not identified, detailed and quantified sufficiently. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment in IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and corresponding methods are comprehensive tools for strategic IT decision making. The purpose of this research is to provide evaluation methods that allow the comparison of different organizational forms and software support levels. The research begins with a comprehensive introduction dealing with the business environment that industrial networks are facing and concludes highlighting the challenges for the supply chain software industry. Afterwards, the central terminology is addressed, focusing on organization theory, IT investment peculiarities and supply chain management software typology. The literature review classifies recent supply chain management research referring to organizational design and its software support. The classification encompasses criteria related to research methodology and content. Empirical studies from management science focus on network types and organizational fit. Novel planning algorithms and innovative coordination schemes are developed mostly in the field of operations research in order to propose new software features. Operations and production management researchers realize cost-benefit analysis of IT software implementations. The literature review reveals that the success of software solutions for network coordination depends strongly on the fit of three dimensions: network configuration, coordination scheme and software functionality. Reviewed literature is mostly centered on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but the associated coordination cost has not been addressed by researchers. Fundamentals of efficient organizational design are explained in detail as far as required for the understanding of the synthesis of different organizational forms. Several coordination schemes have been shaped through the variation of the following design parameters: organizational structuring, coordination mechanisms and software support. The different organizational proposals are evaluated using a heuristic approach and a simulation-based method. For both cases, the principles of organization theory are respected. A lack of performance is due to dependencies between activities which are not managed properly. Therefore, within the heuristic method, dependencies are classified and their intensity is measured based on contextual factors. Afterwards the suitability of each organizational design element for the management of a specific dependency is determined. Finally, each organizational form is evaluated based on the contribution of the sum of design elements to coordination benefit and to coordination cost. Coordination benefit refers to improvement in logistic performance – this is the core concept of most supply chain evaluation models. Unfortunately, coordination cost which must be incurred to achieve benefits is usually not considered in detail. Iterative processes are costly when manually executed. This is the case when SCM software is not implemented and the ERP system is the only available coordination instrument. The heuristic model provides a simplified procedure for the classification of dependencies, quantification of influence factors and systematic search for adequate organizational forms and IT support. Discrete event simulation is applied in the second evaluation model using the software package ‘Plant Simulation’. On the one hand logistic performance is measured by manufacturing, inventory and transportation cost and penalties for lost sales. On the other hand coordination cost is explicitly considered taking into account iterative coordination cycles. The method is applied to an exemplary supply chain configuration considering various parameter settings. The simulation results confirm that, in most cases, benefit increases when coordination is intensified. However, in some situations when manual, iterative planning cycles are applied, additional coordination cost does not always lead to improved logistic performance. These unexpected results cannot be attributed to any particular parameter. The research confirms the great importance of up to now disregarded dimensions when evaluating SCM concepts and IT tools. The heuristic method provides a quick, but only approximate comparison of coordination efficiency for different organizational forms. In contrast, the more complex simulation method delivers detailed results taking into consideration specific parameter settings of network context and organizational design.

Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market

Empresas tecnológicas creadas en España entre los años 2000 y 2010: perfil del emprendedor e importancia de la ayuda pública en su desarrollo

Este trabajo pretende contribuir al conocimiento de las nuevas empresas de base tecnológica (NEBT) creadas en España analizando aspectos relativos a su distribución geográfica, sectorial, tamaño, estructura financiera, protección de resultados, participación en programas de I+D o perfil de sus emprendedores. Para ello lleva a cabo un estudio descriptivo de las empresas que recibieron ayudas de la iniciativa Neotec concedidas por el Centro para el Desarrollo Tecnológico Industrial (CDTI) a este tipo de compañías entre los años 2000 y 2010. Por otro lado, analiza el perfil de los emprendedores tecnológicos que han creado empresas en España en la última década

An Autonomous Engine for Services Configuration and Deployment.

The runtime management of the infrastructure providing service-based systems is a complex task, up to the point where manual operation struggles to be cost effective. As the functionality is provided by a set of dynamically composed distributed services, in order to achieve a management objective multiple operations have to be applied over the distributed elements of the managed infrastructure. Moreover, the manager must cope with the highly heterogeneous characteristics and management interfaces of the runtime resources. With this in mind, this paper proposes to support the configuration and deployment of services with an automated closed control loop. The automation is enabled by the definition of a generic information model, which captures all the information relevant to the management of the services with the same abstractions, describing the runtime elements, service dependencies, and business objectives. On top of that, a technique based on satisfiability is described which automatically diagnoses the state of the managed environment and obtains the required changes for correcting it (e.g., installation, service binding, update, or configuration). The results from a set of case studies extracted from the banking domain are provided to validate the feasibility of this proposa

A new DSATUR-based algorithm for exact vertex coloring

This paper describes a new exact algorithm PASS for the vertex coloring problem based on the well known DSATUR algorithm. At each step DSATUR maximizes saturation degree to select a new candidate vertex to color, breaking ties by maximum degree w.r.t. uncolored vertices. Later Sewell introduced a new tiebreaking strategy, which evaluated available colors for each vertex explicitly. PASS differs from Sewell in that it restricts its application to a particular set of vertices. Overall performance is improved when the new strategy is applied selectively instead of at every step. The paper also reports systematic experiments over 1500 random graphs and a subset of the DIMACS color benchmark.

Empresas tecnológicas creadas en España entre los años 2000 y 2010: perfil del emprendedor e importancia de la ayuda pública en su desarrollo

Este trabajo pretende contribuir al conocimiento de las NEBT a través de un doble objetivo. Por un lado, llevar a cabo un análisis descriptivo de los resultados de las ayudas concedidas por el Centro para el Desarrollo Tecnológico Industrial (CDTI) a este colectivo de empresas en los últimos nueve años a través de la Iniciativa Neotec, lo que permitirá comprender mejor la adicionalidad de este tipo de actuaciones públicas y su impacto en la creación de NEBT. Por otro lado, caracterizar el perfil de los emprendedores tecnológicos en España con la finalidad de incrementar el conocimiento de este colectivo y promover su aparición. Para finalizar se ofrecen las principales conclusiones y se realizan algunas recomendaciones para el apoyo a este tipo de empresas.

Fenómeno de internacionalización temprana en empresas creadas en entornos universitarios

Hasta finales del siglo XX ha sido incuestionable la vigencia del modelo de internacionalización de empresas conocido como ?Modelo Gradual? o ?Modelo de Uppsala? (Johanson y Vahlne, 1977). Este modelo se caracteriza fundamentalmente por considerar que las empresas comienzan asentándose en sus mercados de origen, en donde van adquiriendo experiencia y conocimiento y van adueñándose de recursos que les permitan internacionalizarse gradualmente en el futuro, comenzando por países cercanos y con similitudes al país de origen. Estas similitudes se miden fundamentalmente en factores demográficos, sociológicos y culturales (Johanson y Vahlne, 1977). Según este modelo, las empresas intentan minimizar al máximo la probabilidad de fracaso de su proceso de internacionalización (Autio y Sapienza, 2000).

Estudio sobre patrones de competitividad en las empresas de alto crecimiento del sector TIC español

La situación económica actual, especialmente en las principales economías desarrolladas de Europa y América, está marcada por los bajos, o incluso negativos, niveles de crecimiento económico de la mayor parte de las naciones, y los elevados niveles de desempleo. Por este motivo, se hace urgente identificar nuevas fórmulas de desarrollo que permitan contribuir al crecimiento económico y a la generación de empleo. El caso español es un claro ejemplo de esta situación. Sus tasas de crecimiento han pasado del 4% en los años 2007-2010, a tasas negativas del 5% en 2009.

Propuesta de un modelo y factores determinantes de la fragmentación internacional de la producción en el sector automóvil de España

Una de los rasgos más característicos de la presente globalización es el desarrollo de la fragmentación de la producción, siendo esta, la división del proceso productivo en diferentes localizaciones a lo largo de varios países. Debido a la globalización de los mercados, al surgimiento de nuevas zonas económicas (Zona Euro, Nafta, Mercosur, etc.), a los países emergentes (China, India, Rusia, Brasil), a la reducción de los costes del transporte internacional y al desarrollo de las comunicaciones, ha provocado el incremento del comercio internacional en bienes intermedios, así como el diseño, fabricación y ensamblaje de un producto en diferentes localizaciones a lo largo de varios países. El incremento de la fragmentación en el comercio internacional ha creado un interés por saber cuales son los factores determinantes de la misma en bienes intermedios. El indicador IITV es el utilizado para medir la fragmentación de la producción entre España y sus 19 principales socios comerciales y varios factores sugeridos por la literatura en fragmentación son utilizados en un rango de años desde el año 2004 al año 2008. Los resultados obtenidos muestran que la gran mayoría del comercio en bienes intermedios es IITV y los factores determinantes de la fragmentación de la producción en el sector del automóvil en España, son el tamaño del mercado, la pertenencia a UE, la distancia y el coeficiente de libre comercio.

Propuesta de un Modelo para la Gestión de los Neumáticos de Una flota de Vehículos

En la gestión de los neumáticos de una flota de vehículos el mejor ratio para ello es el coste del neumático dividido por las Horas o Km. realizados por el neumático, pero existen flotas de vehículos que por sus características de uso no se puede realizar un seguimiento de las horas o Km. que realiza el neumático en su vida útil ya que son vehículos que son utilizados por un gran número de conductores en diferentes turnos al día. Este tipo de flotas suelen operar en entornos urbanos y son: Vehículos destinados a la limpieza viaria, recogida de basuras, mantenimiento de jardines, Policía, Guardia Civil, Bomberos etc. así también en menor medida flotas de empresas, renting de vehículos, alquiler de vehículos etc. por ello se propone un modelo de gestión de neumáticos para una flota de vehículos en los que no se puede hacer un seguimiento de las horas o kilómetros realizados por el neumático en su uso.

E-CRM in SMEs: an exploratory study in Sangammer region of Maharashtra in India

Although there are many definitions of SME's there is no globally accepted definition of a small or medium-sized enterprise. Small Medium Enterprises (SME) the catalyst in economic growth & development of the country, are facing tough competition in market place and in establishing themselves as credible supplier of quality product and services. In India they are producing more than 8000 different products. The common perception is that small to medium businesses have very little options in terms of CRM solutions. This is clearly not the case. SME's now have a lot of options and can exercise same. Businesses are shifting from product centric to customer centric. Long before the advent of technology, businesses have always recognized that the customer is the soul of every business. Businesses try to have personal relationship with their customers. Moving towards customer centric approach is a multi prolonged efforts that requires transformation of process, culture and strategy from top level to every individual employee. Technology has a crucial role in providing tools and infrastructure to support this. CRM supports SMEs in their business customer loyalty.

Auto component supply chain: a path to global India

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to maximize total profitability.’ After 1950, supply chain management got a boost with the production and manufacturing sector getting highest attention. The inventory became the responsibility of the marketing, accounting and production areas. Order processing was part of accounting and sales. Supply chain management became one of the most powerful engines of business transformation. It is the one area where operational efficiency can be gained. It reduces organizations costs and enhances customer service. With the liberalization of world trade, globalization, and emergence of the new markets, many organizations have customers and competitions throughout the world, either directly or indirectly. Business communities are aware that global competitiveness is the key to the success of a business. Competitiveness is ability to produce, distribute and provide products and services for the open market in competition with others. The supply chain, a critical link between supplier, producer and customer is emerged now as an essential business process and a strategic lever, potential value contributor a differentiator for the success of any business. Supply chain management is the management of all internal and external processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through logistics delivery.). Goods-either in raw form or processed, whole sale or retailed distribution, business or technology services, in everyday life- in the business or household- directly or indirectly supply chain is ubiquitously associated in expanding socio-economic development. Supply chain growth competitive performance and supporting strong growth impulse at micro as well as micro economic levels. Keeping the India vision at the core of the objective, the role of supply chain is to take up social economic challenges, improve competitive advantages, develop strategies, built capabilities, enhance value propositions, adapt right technology, collaborate with stakeholders and deliver environmentally sustainable outcomes with minimum resources.

Desarrollo de un modelo conceptual para la implantación de sistemas de calidad en sistemas sociotécnicos

En el entorno cada vez más dinámico que ha ido configurándose a lo largo del siglo XX en base a las exigencias crecientes del entorno, la necesidad de innovar ha sido una constante. Pero si la productividad fue inicialmente el elemento clave para lograrlo, en el último cuarto de siglo han aparecido nuevos elementos entre los que cabe destacar la calidad, un factor que se ha mostrado cada vez más relevante para la competitividad de la empresa a la par que ha ido adquiriendo un nuevo enfoque multidimensional y dinámico dirigido a proporcionar valor a todos los grupos de interés No hay duda que estas presiones competitivas derivadas de la internacionalización de los mercados que se produce a ritmo creciente durante las últimas décadas del siglo XX, han obligado a muchas organizaciones a implantar los enfoques de la calidad cuando aun no se habían analizado y difundido suficientemente los desajustes y errores derivados de la aplicación de los enfoques tradicionales de organización del trabajo.