An Internet of Things approach for managing smart services provided by wearable devices.

The Internet of Things (IoT) is growing at a fast pace with new devices getting connected all the time. A new emerging group of these devices are the wearable devices, and Wireless Sensor Networks are a good way to integrate them in the IoT concept and bring new experiences to the daily life activities. In this paper we present an everyday life application involving a WSN as the base of a novel context-awareness sports scenario where physiological parameters are measured and sent to the WSN by wearable devices. Applications with several hardware components introduce the problem of heterogeneity in the network. In order to integrate different hardware platforms and to introduce a service-oriented semantic middleware solution into a single application, we propose the use of an Enterprise Service Bus (ESB) as a bridge for guaranteeing interoperability and integration of the different environments, thus introducing a semantic added value needed in the world of IoT-based systems. This approach places all the data acquired (e.g., via Internet data access) at application developers disposal, opening the system to new user applications. The user can then access the data through a wide variety of devices (smartphones, tablets, computers) and Operating Systems (Android, iOS, Windows, Linux, etc.).

Documentación de estudio para sistemas audiovisuales

Este proyecto es una documentación sintetizada, para los alumnos de Grado en Imagen y Sonido, de todos los conceptos que conciernen a la asignatura Sistemas Audiovisuales. No obstante puede servir para todo aquel al que le interese la materia, sin ser necesariamente estudiante. El material se basa en la recopilación de libros de diversos autores, páginas web y catálogos de productos de empresas del sector audiovisual. Se intenta con esto incentivar en el auto-aprendizaje, proporcionando multitud de fuentes de información. El documento se ha dividido en dos bloques temáticos correspondientes a los temas: 1- Dispositivos de captación y reproducción de sonido e imagen. 2- Señales y formatos de audio y vídeo. Aunque no es tema de este proyecto pero si de la asignatura hay que nombrar el tercer bloque temático, Introducción a los sistemas de transmisión de audio y vídeo. Dado que hay suficiente documentación de estudio sobre éste se ha optado por no incluirlo. Cada bloque temático a su vez contiene cuatro unidades didácticas. Cada unidad se ha desarrollado de manera independiente a las demás, es decir, que cada unidad puede ser estudiada sin necesidad de recurrir a otras unidades para comprender la/s que interesa/n. Por otro lado hay que remarcar que todos los capítulos tienen relación entre sí. La documentación se complementa al final de cada unidad didáctica con un test de evaluación que a su vez ha sido publicado dentro del entorno de Moodle en la página correspondiente a la asignatura. Para ello se ha accedido a esta plataforma on line con el rol de editor de contenido. Para la elaboración de los cuestionarios se han tomado los conceptos clave de cada unidad didáctica, de esta manera los alumnos pueden saber si han comprendido lo que se explica en la documentación y mejorar así sus conocimientos. Para la redacción y estructuración de cada unidad didáctica, así como el documento en general, se ha cogido como referencia la Taxonomía de objetivos de la Educación o Taxonomía de Bloom. Dado que el dominio cognitivo del lector se encuadra dentro del ‘nivel de comprensión’, el documento no resulta tedioso en su estudio. No obstante introduce al alumno en los temas más importantes de la materia, proporcionando una base sólida de conocimiento en sistemas audiovisuales. Es precisamente el interés en hacer lo más accesible posible este documento lo que ha dificultado su elaboración, ya que el área de estudio es muy extensa y es difícil sintetizar sin eliminar contenido importante. No obstante para hacer más fiable el documento se ha seguido las pautas temáticas y argumentales marcadas por el Departamento Ingeniería Audiovisual y Comunicaciones de la Escuela Universitaria de Ingeniería Técnica de Telecomunicaciones de la Universidad Politécnica de Madrid verificando cada uno de los capítulos con los profesores de este departamento. Al tratarse de un proyecto con fines académicos, el texto se ha apoyado por figuras, esquemas, tablas, anexos y desarrollo de ecuaciones para hacer más comprensible lo que se expone. Algunos de estas informaciones se incluyen en inglés y no se ha creído conveniente su traducción dado que gran parte de la información que encontrará el alumno a lo largo de la carrera vendrá escrita en este idioma. Por último hay que decir al lector que es conveniente, pero no necesario, tener ciertas nociones de cálculo, álgebra, ondas y circuitos para seguir con fluidez lo que a continuación se expone. ABSTRACT. This project concerns all the concepts and topics of the subject Audiovisual Systems. It has been created for students of Sound and Image Degree, however everyone who's interested in this subject could use it even if isn’t a student. The document is divided into two main thematic sections corresponding to the topics: 1- Catchment and reproduction devices of sound and image. 2- Audio and video signals and formats. Even if this subject it isn’t mention in this project, it’s very important to quote a third important thematic of this block , such as Introduction about Transmission of Audio and Video System. Since there is enough study-documentation about this topic, it has been taken the choice to don’t integrate this chapter in this project. Every thematic block in this project is divided in chapters that have been developed in an independent way: that’s means that for each unit it is not necessary to look forward to other chapters in this project On the other hand it is necessary to emphasize that all the chapters are related one to each other. Every didactic unit and chapter ends with an evaluation test , that has been published with Moodle System using a content editor account. Those exercises will help in a easy way the student to improve his skills and his own ability. Collection of books of various authors, websites and product catalogs of audiovisual companies are used in this document and are included for stimulate the curiosity of the student. The key concepts of each unit have been used for making tests, so in this way students could be able to know if they have understood what the documentation explains and improve his skills. For writing and building each didactic unit, such as in the general document, it has been taken reference from Bloom’s Taxonomy. Since the skills and competence of the student are concentrated in the ‘comprehension level’, it will not be very complicated or hard to study. In spite of everything, all of thematic treated and discussed in documentation gives a solid knowledge of topic about audiovisual systems. The most difficult thing of realizing this document it was to take very complex topic and try to explain them as simply as possible In spite of everything for making this document as much accurated as possible it has been taken as point of reference rules established by the Department of Audiovisual Engineering & Communications of University School of Telecommunications Engineering (EUITT-UPM). This Project reach academic goal, for this reason in this document images, tables, annexes and outlines are enclosed in this document for an easier compression. At last, it’s necessary to say that each lector must have necessary a basic knowledge about arithmetic, calculus, waves and electronic circuits in the order that he could follow in a fluently way what the documentation set out.

Design and control of multi-finger haptic devices for dexterous manipulation

En la interacción con el entorno que nos rodea durante nuestra vida diaria (utilizar un cepillo de dientes, abrir puertas, utilizar el teléfono móvil, etc.) y en situaciones profesionales (intervenciones médicas, procesos de producción, etc.), típicamente realizamos manipulaciones avanzadas que incluyen la utilización de los dedos de ambas manos. De esta forma el desarrollo de métodos de interacción háptica multi-dedo dan lugar a interfaces hombre-máquina más naturales y realistas. No obstante, la mayoría de interfaces hápticas disponibles en el mercado están basadas en interacciones con un solo punto de contacto; esto puede ser suficiente para la exploración o palpación del entorno pero no permite la realización de tareas más avanzadas como agarres. En esta tesis, se investiga el diseño mecánico, control y aplicaciones de dispositivos hápticos modulares con capacidad de reflexión de fuerzas en los dedos índice, corazón y pulgar del usuario. El diseño mecánico de la interfaz diseñada, ha sido optimizado con funciones multi-objetivo para conseguir una baja inercia, un amplio espacio de trabajo, alta manipulabilidad y reflexión de fuerzas superiores a 3 N en el espacio de trabajo. El ancho de banda y la rigidez del dispositivo se han evaluado mediante simulación y experimentación real. Una de las áreas más importantes en el diseño de estos dispositivos es el efector final, ya que es la parte que está en contacto con el usuario. Durante este trabajo se ha diseñado un dedal de bajo peso, adaptable a diferentes usuarios que, mediante la incorporación de sensores de contacto, permite estimar fuerzas normales y tangenciales durante la interacción con entornos reales y virtuales. Para el diseño de la arquitectura de control, se estudiaron los principales requisitos para estos dispositivos. Entre estos, cabe destacar la adquisición, procesado e intercambio a través de internet de numerosas señales de control e instrumentación; la computación de equaciones matemáticas incluyendo la cinemática directa e inversa, jacobiana, algoritmos de detección de agarres, etc. Todos estos componentes deben calcularse en tiempo real garantizando una frecuencia mínima de 1 KHz. Además, se describen sistemas para manipulación de precisión virtual y remota; así como el diseño de un método denominado "desacoplo cinemático iterativo" para computar la cinemática inversa de robots y la comparación con otros métodos actuales. Para entender la importancia de la interacción multimodal, se ha llevado a cabo un estudio para comprobar qué estímulos sensoriales se correlacionan con tiempos de respuesta más rápidos y de mayor precisión. Estos experimentos se desarrollaron en colaboración con neurocientíficos del instituto Technion Israel Institute of Technology. Comparando los tiempos de respuesta en la interacción unimodal (auditiva, visual y háptica) con combinaciones bimodales y trimodales de los mismos, se demuestra que el movimiento sincronizado de los dedos para generar respuestas de agarre se basa principalmente en la percepción háptica. La ventaja en el tiempo de procesamiento de los estímulos hápticos, sugiere que los entornos virtuales que incluyen esta componente sensorial generan mejores contingencias motoras y mejoran la credibilidad de los eventos. Se concluye que, los sistemas que incluyen percepción háptica dotan a los usuarios de más tiempo en las etapas cognitivas para rellenar información de forma creativa y formar una experiencia más rica. Una aplicación interesante de los dispositivos hápticos es el diseño de nuevos simuladores que permitan entrenar habilidades manuales en el sector médico. En colaboración con fisioterapeutas de Griffith University en Australia, se desarrolló un simulador que permite realizar ejercicios de rehabilitación de la mano. Las propiedades de rigidez no lineales de la articulación metacarpofalange del dedo índice se estimaron mediante la utilización del efector final diseñado. Estos parámetros, se han implementado en un escenario que simula el comportamiento de la mano humana y que permite la interacción háptica a través de esta interfaz. Las aplicaciones potenciales de este simulador están relacionadas con entrenamiento y educación de estudiantes de fisioterapia. En esta tesis, se han desarrollado nuevos métodos que permiten el control simultáneo de robots y manos robóticas en la interacción con entornos reales. El espacio de trabajo alcanzable por el dispositivo háptico, se extiende mediante el cambio de modo de control automático entre posición y velocidad. Además, estos métodos permiten reconocer el gesto del usuario durante las primeras etapas de aproximación al objeto para su agarre. Mediante experimentos de manipulación avanzada de objetos con un manipulador y diferentes manos robóticas, se muestra que el tiempo en realizar una tarea se reduce y que el sistema permite la realización de la tarea con precisión. Este trabajo, es el resultado de una colaboración con investigadores de Harvard BioRobotics Laboratory. ABSTRACT When we interact with the environment in our daily life (using a toothbrush, opening doors, using cell-phones, etc.), or in professional situations (medical interventions, manufacturing processes, etc.) we typically perform dexterous manipulations that involve multiple fingers and palm for both hands. Therefore, multi-Finger haptic methods can provide a realistic and natural human-machine interface to enhance immersion when interacting with simulated or remote environments. Most commercial devices allow haptic interaction with only one contact point, which may be sufficient for some exploration or palpation tasks but are not enough to perform advanced object manipulations such as grasping. In this thesis, I investigate the mechanical design, control and applications of a modular haptic device that can provide force feedback to the index, thumb and middle fingers of the user. The designed mechanical device is optimized with a multi-objective design function to achieve a low inertia, a large workspace, manipulability, and force-feedback of up to 3 N within the workspace; the bandwidth and rigidity for the device is assessed through simulation and real experimentation. One of the most important areas when designing haptic devices is the end-effector, since it is in contact with the user. In this thesis the design and evaluation of a thimble-like, lightweight, user-adaptable, and cost-effective device that incorporates four contact force sensors is described. This design allows estimation of the forces applied by a user during manipulation of virtual and real objects. The design of a real-time, modular control architecture for multi-finger haptic interaction is described. Requirements for control of multi-finger haptic devices are explored. Moreover, a large number of signals have to be acquired, processed, sent over the network and mathematical computations such as device direct and inverse kinematics, jacobian, grasp detection algorithms, etc. have to be calculated in Real Time to assure the required high fidelity for the haptic interaction. The Hardware control architecture has different modules and consists of an FPGA for the low-level controller and a RT controller for managing all the complex calculations (jacobian, kinematics, etc.); this provides a compact and scalable solution for the required high computation capabilities assuring a correct frequency rate for the control loop of 1 kHz. A set-up for dexterous virtual and real manipulation is described. Moreover, a new algorithm named the iterative kinematic decoupling method was implemented to solve the inverse kinematics of a robotic manipulator. In order to understand the importance of multi-modal interaction including haptics, a subject study was carried out to look for sensory stimuli that correlate with fast response time and enhanced accuracy. This experiment was carried out in collaboration with neuro-scientists from Technion Israel Institute of Technology. By comparing the grasping response times in unimodal (auditory, visual, and haptic) events with the response times in events with bimodal and trimodal combinations. It is concluded that in grasping tasks the synchronized motion of the fingers to generate the grasping response relies on haptic cues. This processing-speed advantage of haptic cues suggests that multimodalhaptic virtual environments are superior in generating motor contingencies, enhancing the plausibility of events. Applications that include haptics provide users with more time at the cognitive stages to fill in missing information creatively and form a richer experience. A major application of haptic devices is the design of new simulators to train manual skills for the medical sector. In collaboration with physical therapists from Griffith University in Australia, we developed a simulator to allow hand rehabilitation manipulations. First, the non-linear stiffness properties of the metacarpophalangeal joint of the index finger were estimated by using the designed end-effector; these parameters are implemented in a scenario that simulates the behavior of the human hand and that allows haptic interaction through the designed haptic device. The potential application of this work is related to educational and medical training purposes. In this thesis, new methods to simultaneously control the position and orientation of a robotic manipulator and the grasp of a robotic hand when interacting with large real environments are studied. The reachable workspace is extended by automatically switching between rate and position control modes. Moreover, the human hand gesture is recognized by reading the relative movements of the index, thumb and middle fingers of the user during the early stages of the approximation-to-the-object phase and then mapped to the robotic hand actuators. These methods are validated to perform dexterous manipulation of objects with a robotic manipulator, and different robotic hands. This work is the result of a research collaboration with researchers from the Harvard BioRobotics Laboratory. The developed experiments show that the overall task time is reduced and that the developed methods allow for full dexterity and correct completion of dexterous manipulations.

Light level to electrical frequency conversion with hybrid optical bistable devices.

A new concept in light level detection. The basis is the use of hybrid optical bistable devices working in oscillatory mode. The obtained instabilities show a correspondence between their frequency and the laser light intensity.

Optical memory with twisted nematic liquid crystal (TNLC) devices

A design for obtaining memory in optical bistability with liquid crystals is reported. This design uses optical feedback on a twisted nematie liquid crystal ( TNLC ) through an optoelectronic system. A constant input light is the read-out and its value depends on the desired initial working point, usually at the bottom of the T(V) vs. V curve. Light levels depend on the feedback. An input light pulse change the working point to the top of the transmission curve. When this pulse vanishes, the working point remains at the upper part of the curve. Hence a memory function is obtained. Minimum pulse width needed was 1msec. ON-OPF ratio was 100:3.

A Complexity Architecture for Information Technologies: a Three-Year Didactic Experiment

One medium-term strategy for helping in the management of complexity is the introduction of a conceptual complexity component in the very centre of university curricula. In very few areas is the growth of complexity as evident as in the information technologies (ITs), the focus of the work presented in the current paper. We have therefore developed an integrated way of tackling the specific field of information technologies by means of an approach,to complexity. The content of this paper describes the guidelines of our research effort, placing an emphasis on informatics. Concepts of complexity based on the system metaphor have been substantially drawn upon in this exercise and are thus presented in some detail. Also described is a didactic experiment conducted by the author and designed to provide a new and integrating approach to University curricula for future professionals. The students' "discovery" of complexity is the focal point of the experiment. The findings of this effort are encouraging and call for the continuation and expansion of this experiment.

Mobile devices: dominant design as a goal

Since the beginning of the smartphones in the 80s, the mobile device market has grown and evolved towards devices connected everywhere, with hardware more and more close to computers and laptops than a classic mobile telephone. Nowadays, this market seems to be crowded and some companies seem not to know exactly which step is next. In this manner, a concept appears in the market as a solution or a difficulty to overcome: the dominant design. The thesis aims to establish an analysis and definition of what a dominant design is and how we should understand this concept: which are the costumers’ demands and needs? How can we relate this information with the dominant design? What is the strategy of the firm before designing a device? Do they use a concept similar to a dominant design?. The research base its analysis in a theoretical framework based in innovation and marketing literature, to then compare the model studied with data collected from surveys made to customers, interviews made to workers of the mobile device market, and different new projects on the market. The research finishes with a discussion about the theoretical and the empirical frameworks, and concludes replying the research questions, and defining a dominant design and its current situation in the market. RESUMEN. Desde la aparición de los Smartphones en los años 80, el mercado de los dispositivos móviles ha crecido y evolucionado hacia dispositivos cada vez más conectados, con hardware cada vez más cercano a los ordenadores de sobremesa y portátiles que al clásico teléfono móvil. A día de hoy, el mercado está saturado y algunas compañías parecen dubitativas ante el próximo paso a seguir. De esta manera, el concepto del diseño dominante aparece en el mercado como una solución a esta dificultad. El primer capítulo de este estudio se centra en establecer, a modo de introducción, los antecedentes al caso a estudiar, el objetivo de la tesis con sus limitaciones y delimitaciones, así como la metodología utilizada. También se plantean las preguntas principales (Research Questions) sobre el objetivo de la tesis, las cuales darán respuesta en la conclusión final al caso de estudio. Este proyecto tiene como objetivo establecer un análisis y definición sobre que es un diseño dominante y qué deberíamos entender como tal: ¿cuáles son las necesidades y las exigencias de los clientes? ¿Cómo se puede relacionar esta información con el diseño dominante en el sector tecnológico? ¿Cuáles son las estrategias de las empresas antes de diseñar un nuevo dispositivo? ¿Usan un concepto o modelos similares a un diseño dominante? Posteriormente, el segundo capítulo expone la bibliografía utilizada, y el enfoque analítico que se llevará a cabo con las 3 principales fuentes de datos. La investigación enfoca su análisis en un marco teórico, basado en publicaciones y bibliografía relacionadas con la innovación y el marketing, para luego comparar el modelo estudiado con un marco empírico: datos obtenidos de encuestas a consumidores, entrevistas a profesionales del sector de los dispositivos móviles, y diferentes prototipos y nuevos proyectos en este mercado. Entre esta literatura se encuentran manuales de marketing como “22 Immutable laws of Marketing” (de Al Ries & Jack Trout), publicaciones sobre el sector industrial de la tecnología y negocios: “Crossing the Chasm” de Geoffrey A. Moore y modelos de innovación entre otros como “Mastering the Dynamics of Innovation” de James M. Utterback. El tercer capítulo corresponde al estudio del marco teórico de la tesis, donde se analizará principalmente el modelo de innovación utilizado (el modelo cíclico de Utterback) y varios principios de marketing aplicados a este sector. Se plantean las bases de este modelo, la definición que el propio Utterback ofrece sobre el diseño dominante, y las 3 fases del proceso del mismo (Fluid Phase, Transitional Phase y Specific Phase), donde las empresas cambian de estrategia según las circunstancias evolutivas del dispositivo, su posición respecto el líder del mercado, o los procesos de estandarización y de costes. Por último se plantea la base para el desarrollo del diseño dominante en un ciclo evolutivo constante en el tiempo. Respecto a la parte más analítica de la tesis, el cuarto capítulo se desarrolla a partir de los datos obtenidos de las fuentes de información en el marco empírico de estudio. Se obtienen conclusiones sobre los datos realizados en ambas encuestas (en Español e Inglés) y sobre la relevancia de esta información; se estudian uno por uno hasta cuatro casos de nuevos dispositivos a corto-medio plazo en el mercado y se obtienen unas conclusiones globales sobre las entrevistas realizadas a los profesionales del sector y la relevancia de todas estas informaciones. En el quinto capítulo de la tesis se desarrolla la discusión en torno a los marcos teórico y empírico utilizados, para concluir respondiendo a las “Research Questions”, definiendo de esta manera el concepto de diseño dominante y comparando esta definición con la situación real del mercado. Se contrastan las bases del modelo de Utterback con los datos obtenidos en el capítulo cuarto, enfatizando la comparación entre las fases de este modelo con la realidad obtenida a través del estudio. Las encuestas realizadas a los consumidores se enmarcan en la segunda y tercera fase del ciclo, donde el desarrollo del diseño dominante ya está establecido y más desarrollado, mientras que las entrevistas unifican varios puntos clave a tener en cuenta en la primera y segunda fases, orientándose a las capas previas del proceso. Después se comparan uno a uno los 4 dispositivos analizados, a fin de establecer su jerarquía dentro del mercado, como posibles nuevos diseños dominantes o evoluciones especializadas de otros que ya aparecieron en el mercado con anterioridad. Así mismo, en esta parte final del estudio se comparan entre sí los resultados similares entre las tres fuentes de datos, y se analiza la veracidad de todas las fuentes consultadas. Finalmente, se han registrado en un sexto capítulo todas las referencias utilizadas en este proyecto, tanto publicaciones bibliográficas, entrevistas, citas de personajes relevantes del sector y enlaces en la red sobre noticias relevantes. En el apartado de apéndices se adjuntan tres anexos, donde se adjunta información utilizada en el caso de estudio, y la cual se ha obviado del texto principal con el objetivo de agilizar la lectura y la comprensión del mismo. Estos tres apéndices corresponden a las dos encuestas realizadas en ambos idiomas y la entrevista realizada a los profesionales del sector de los dispositivos móviles.

Optical bistable devices as sensing elements

The nonlinear optical properties of many materials and devices have been the main object of research as potential candidates for sensing in different places. Just one of these properties has been, in most of the cases, the basis for the sensing operation. As a consequence, just one parameter can be detected. In this paper, although just one property will be employed too, we will show the possibility to sense different parameters with just one type of sensor. The way adopted in this work is the use of the optical bistability obtained from different photonic structures. Because this optical bistability has a strong dependence on many different parameters the possibility to sense different inputs appears. In our case, we will report the use of some non-linear optical devices, mainly Semiconductor Optical Amplifiers, as sensing elements. Because their outputs depend on many parameters, as the incident light wavelength, polarization, intensity and direction, applied voltage and feedback characteristics, they can be employed to detect, at the same time, different type of signals. This is because the way these different signals affect to the sensor response is very different too and appears under a different set of characteristics.

Optical regeneration based on noise generated in bistable devices: going from 2R to 3R

In this paper we propose to employ an instability that occurs in bistable devices as a control signal at the reception stage to generate the clock signal. One of the adopted configurations is composed of two semiconductor optical amplifiers arranged in a cascaded structure. This configuration has an output equivalent to that obtained from Self-Electrooptic Effect Devices (SEEDs), and it can implement the main Boolean functions of two binary inputs. These outputs, obtained from the addition of two binary signals, show a short spike in the transition from "1" to "2" in the internal processing. A similar result is obtained for a simple semiconductor amplifier with bistable behavior. The paper will show how these structures may help recover clock signals in any optical transmission system

Self-beating instabilities in bistable devices

Since the observation of optical bistability by Gibbs et al., optical bistability has been the field where researchers from many fields have found a common place to work. More recently, when Ikeda and co-workers discussed the effect of a delayed feedback on instability of a ring cavity containing a non linear dielectric medium, and pointed out that the transmitted light from the ring cavity can be periodic or chaotic in time under a certain condition, optical bistable devices have shown new possibilities to be applied in many different fields. The novel phenomenon has been predicted to be observed in the hybrid optical device and has been confirmed by Gibbs et al. Moreover, as we have shown, a similar effect can be obtained when liquid crystal cells are employed as non linear element.

Instabilities In hybrid optical bistable devices with nonlinear feedback

As we have shown,several output conditions can be obtained from a hybrid optical bistable device when twisted nematic liquid crystal cells are employed as nonlinear elements.

Testing equipment for the improvement of mechanical devices to minimize damage to fruit in commercial packing lines.

Damages -reduced in fruit packing lines is a major cause of grace reduction and quality loos in fresh marks: fruit. Fruit must be treated gently during in sir handling to improve their qualityin order to get a good price in a competitive market. The correct post-hardvest handling in fruit packing lines is a prerequisite to cut down the heavy post-harvest losses. Fruit packing lines must be evaluated, studying their design, the impacts applied to the fruits, the characteristics of the materials, etc. This study establishes the possibility of carrying out modifications and tests in a packing line during a long period of time. For this purpose, an experimental fruit packing line has been designed and located in the Agricultural Engineering Department of the Polythecnic University of Madrid with the aim of improving mechanical devices and fruit handling conditions to minimize damage to fruit. The experimental line consists of several transporting belts, one rollers transporter, one sizer, one elevator, one singularizer, and three trays to receive the calibrated fruit. The line has a length of 6.15 m and a width cf 1.9 m. Movement of the different components is regulated by electric motors with variable velocity electronically controlled. The height of the transfer points is variable and can be easily modified. The experimental line has been calibrated using two instrumented spheres IS 100 (8.8 cm Ø and6.2cm Ø). Average acceleration values obtained in all the transfers of the experimental line lay under 80 g's, although there is big variation for some of them being some values above 100 g's.

Optical memory with TNLC devices (1982)

In this paper we describe a twisted nematic liquid crystal (TNLC) device structure with optical feedback capable of bistable operation and optical memory. Its structure is the conventional one as employed in hybrid optical bistability.

Inertial behavior of offshore devices

In the last years, there has been a continued growth in the number of offshore operations for handling large equipment and objects, with emphasis on installation and maintenance of devices for exploiting marine renewable energy like generators for harnessing wind, waves and currents energy. Considering the behaviour of these devices during manoeuvrings, and due to their size and by the interaction with the surrounding fluid, the effect of inertial forces and torques is very important, which requires a specific modelling. This paper especially discusses the masses and moments of inertia modelling problem, with the aim to use it in the simulation of the complex manoeuvres of these devices and in the automatic control systems designed for their offshore operations. Given the importance and complexity of the added mass modelling, a method for its early design identification, developed by the R&D Group on Marine Renewable Energy Technologies of the UPM (GITERM) and its use on special cases like emersion manoeuvres of devices from underwater to the surface will be presented.

Integration of wearable devices in a wireless sensor network for an e-health application

Applications based on Wireless Sensor Networks for Internet of Things scenarios are on the rise. The multiple possibilities they offer have spread towards previously hard to imagine fields, like e-health or human physiological monitoring. An application has been developed for its usage in scenarios where data collection is applied to smart spaces, aiming at its usage in fire fighting and sports. This application has been tested in a gymnasium with real, non-simulated nodes and devices. A Graphic User Interface has been implemented to suggest a series of exercises to improve a sportsman/woman s condition, depending on the context and their profile. This system can be adapted to a wide variety of e-health applications with minimum changes, and the user will interact using different devices, like smart phones, smart watches and/or tablets.