Geochemical fingerprints and controls in the sediments of an urban river: River Manzanares, Madrid (Spain)

The geochemical fingerprint of sediment retrieved from the banks of the River Manzanares as it passes through the City of Madrid is presented here. The river collects the effluent water from several Waste Water Treatment (WWT) plants in and around the city, such that, at low flows, up to 60% of the flow has been treated. A total of 18 bank-sediment cores were collected along the course of the river, down to its confluence with the Jarama river, to the south–east of Madrid. Trace and major elements in each sample were extracted following a double protocol: (a) “Total” digestion with HNO3, HClO4 and HF; (b) “Weak” digestion with sodium acetate buffered to pH=5 with acetic acid, under constant stirring. The digests thus obtained were subsequently analysed by ICP-AES, except for Hg which was extracted with aqua regia and sodium chloride-hydroxylamine sulfate, and analysed by Cold Vapour-AAS. X-ray diffraction was additionally employed to determine the mineralogical composition of the samples. Uni- and multivariate analyses of the chemical data reveal the influence of Madrid on the geochemistry of Manzanares' sediments, clearly manifested by a marked increase in the concentration of typically “urban” elements Ag, Cr, Cu, Pb and Zn, downstream of the intersection of the river with the city's perimeter. The highest concentrations of these elements appear to be associated with illegal or accidental dumping of waste materials, and with the uncontrolled incorporation of untreated urban runoff to the river. The natural matrix of the sediment is characterised by fairly constant concentrations of Ce, La and Y, whereas changes in the lithology intersected by the river cause corresponding variations in Ca–Mg and Al–Na contents. In the final stretch of the river, the presence of carbonate materials seems to exert a strong geochemical control on the amount of Zn and, to a lesser extent, Cu immobilised in the sediments. This fact suggests that a variable but significant proportion of both elements may be susceptible to reincorporation in the aqueous phase under realistic environmental conditions.

Process of Expropriation of Buildings for the Construction of the New Dock of the Port of Cartagena (Spain) in the 18th Century

The need of the Bourbon monarchy to build a Naval Base in the Bay of Cartagena (Spain) during the eighteenth century, implied performing various actions on the environment which allowed the construction of the new dock. One of the priority actions was the transformation of the watershed of the streams that flowed into Mandaraches´s sea. For this reason, a dike was designed and constructed in the northern part of the city. The design of this great work, which was designed as a fortification of the city, was subject to considerable uncertainties. Its proximity to the city involved the demolition of several buildings in the San Roque´s neighborhood. The greater or lesser number of affected buildings and the value of the just indemnification for the expropriation of them, become decisive factors to determine if the work was viable for the Royal Estate or not.

Conexión con la meseta desde el Ebro medio de las vías romanas como base de la malla territorial de España

No tenemos conocimiento de ninguna red de caminos prerromanos que sirvieran como base de una posible malla territorial de España. Sin embargo, una sociedad prerromana sin caminos, por muy fragmentada y aislada que fuera, es algo improbable y mucho menos en la Edad del Hierro. Por eso en época prerromana existían infinidad de caminos, muchos de los cuales hoy han desaparecido y otros han sobrevivido, casi siempre con sus recorridos mejorados. Los pueblos prerromanos aprovecharon vías naturales de comunicación (ríos, vados, valles, puertos naturales, llanuras, etc.) para tender sus caminos. En sus orígenes no siguieron pautas concretas, si no que los caminos se originaban por el tránsito (de personas, ganados, mercancías, etc.) de un lugar a otro. De este modo la red viaria prerromana era caótica y anárquica: todo camino tenía numerosos ramales y variantes, según las necesidades. Pendientes excesivas, anchuras variables, etc., en decir eran vías espontáneas, surgidas sin ninguna planificación aparente. Los recorridos en general eran cortos, aunque algunas investigaciones actuales están demostrando que algunas de las cañadas ganaderas más importantes, como la Galiana, y de largo recorrido, eran de origen prerromano. En el caso de la península Ibérica, y más concretamente en el caso de la Meseta, el territorio estaba fragmentado en diversos pueblos y tribus, agrupados según criterios étnicos y culturales y con contactos con los pueblos próximos que motivan la preponderancia de caminos de recorrido cortos. Solo la necesidad de llevar los rebaños (de cabras y ovejas sobre todo) desde las serranías en verano a las llanuras en invierno, motivaría viajes más largos en los que algunas cañadas ganaderas jugarían un papel más importante. Con la llegada de los romanaos, se implantó en Hispania una densa red viaria, cuya construcción se prolongó durante toda la dominación romana, siendo reparadas muchas calzadas y vías en varias ocasiones. En época romana la red caminera era variada y estaba constituida por “las calzadas” que comunicaban puntos importantes, eran muy transitadas, de ahí que la administración romana las mantuviera siempre en buen estado, para asegurar el intercambio comercial entre zonas distintas, cobro de impuestos, etc. “Los caminos de tierra (viae terrenae)” que además de las calzadas, que podemos asemejar a las actuales carreteras de primer y segundo orden, constituían la infinidad de caminos locales y comarcales. Los trazados se realizaron unos en época romana, y otros muchos apoyándose en los caminos de la época prerromana, éstas vías no se realizaban buscando el recorrido más corto entre dos puntos, ni tampoco el más cómodo y con un firme estructural de menor importancia que en las calzadas. Tampoco estaban hechos para un tipo concreto de transporte, por lo que nos encontraríamos algunos que por su anchura permitían el paso de carros, y otros que sólo permitirían el paso a pie, a caballo o en burro. Solían ser, como hemos indicado, caminos de tierra con acabados en zahorras y recorridos en su mayor parte cortos y medianos. Dentro de la malla territorial de España las calzadas constituirían las denominadas “viae publicae” que constituían la red principal y esqueleto vertebrador de Hispania. Los caminos de tierra constituirían los denominados “actus” caminos de carácter regional que configuraban la mayor parte de la red. Muchas de las “viae publicae” y de los “actus” tendrían su origen en las “viae militares” que habrían sido los primeros construidos, apoyándose en muchas ocasiones en los caminos prerromanos, por los romanos para realizar la conquista de Hispania y que luego con la Paz romana habrían tenido otro tipo de uso. Dentro de estas “viae militares” tuvieron una importancia relevancia aquellas que se utilizaron en la conquista de la Celtiberia, culminada con la caída de Numantia. Dentro de ellas tuvo una importancia fundamental la vía romana del río Alhama, objeto de esta Tesis, que facilitaría el desplazamiento de los ejércitos romanos desde Graccurris, primera ciudad romana fundada en el Ebro medio, hasta Numantia. Desde la época Augusta, la vía romana del río Alhama, pasaría a formar parte de los denominados “actus” formando parte de la malla territorial de la Península Ibérica como vía de comunicación entre la Meseta y el Ebro Medio. We do not have knowledge of any network of ways prerromanos that were serving as base of a possible territorial mesh of Spain. Nevertheless, a company prerromana without ways, for very fragmented and isolated that was, is something improbable and great less in the Age of the Iron. Because of it in epoch prerromana existed infinity of ways, many of which today have disappeared and others have survived, almost always with his improved tours. The people prerromanos took advantage of natural routes of communication (rivers, fords, valleys, natural ports, plains, etc.) to stretch his ways. In his origins concrete guidelines did not continue, if not that the ways were originating for the traffic (of persons, cattle, goods, etc.) to and from. Thus the network viaria prerromana was chaotic and anarchic: all way had numerous branches and variants, according to the needs. Excessive slopes, variable widths, etc., in saying were spontaneous routes arisen without no apparent planning. The tours in general were short, though some current investigations are demonstrating that some of the most important cattle glens, as the Galiana, and of crossed length, were of origin prerromano. In case of the Iberian Peninsula, and more concretely in case of the Plateau, the territory was fragmented in diverse peoples and tribes, grouped according to ethnic and cultural criteria and with contacts with the near peoples that motivate the prevalence of short ways of tour. Only the need to take the flocks (of goats and sheeps especially) from the mountainous countries in summer to the plains in winter, would motivate longer trips in which some cattle glens would play a more important paper. With the arrival of the romanos, a dense network was implanted in Roman Spain viaria, whose construction extended during the whole Roman domination, being repaired many causeways and routes in several occasions. In Roman epoch the pertaining to roads network was changed and constituted by " the causeways " that were communicating important points, they were very travelled, of there that the Roman administration was supporting always in good condition, to assure the commercial exchange between different zones, collection of taxes, etc. "The dirt tracks (viae terrenae)" that besides the causeways, which we can make alike to the current roads of the first and second order, were constituting the infinity of local and regional ways. The tracings were realized some in Roman epoch, and great others resting on the ways of the epoch prerromana, these routes were not realized looking for the most short tour neither between points, two nor neither most comfortable and with a structural road surface of minor importance that in the causeways. They were not also done for a concrete type of transport, for what some of us would think that for his width they were allowing the step of cars, and others that only would allow the step afoot, astride or in donkey. They were in the habit of being, since we have indicated, dirt tracks with ended in zahorras and tours in his most short and medium. Inside the territorial mesh of Spain the causeways would constitute the called ones "viae publicae" that constituted the principal network and skeleton vertebrador of Roman Spain. The dirt tracks would constitute the "actus” called ways of regional character that were forming most of the network. Many of "viae publicae" and of the "actus" they would have his origin in " viae military" that would have been the first ones constructed, resting on many occasions on the ways prerromanos, for the Romans to realize the conquest of Roman Spain and that then with the Roman Peace they would have had another type of use. Inside these "viae military" had an importance relevancy those that were in use in the conquest of the Celtiberia, reached with Numantia's fall. Inside them a fundamental importance had the Roman route of the river Alhama, object of this Thesis, which would facilitate the displacement of the Roman armies from Graccurris, the first Roman city been founded on the average Ebro, up to Numantia. From the August epoch, the Roman route of the river Alhama, would happen to form a part of the "actus” forming a part of the territorial mesh of the Iberian Peninsula as road link between the Plateau and the Average Ebro.

Impact attribution models to evaluate drought effects: economic impacts, risk analyses and management strategies in Spain and Chile

La sequía es un fenómeno natural que se origina por el descenso de las precipitaciones con respecto a una media, y que resulta en la disponibilidad insuficiente de agua para alguna actividad. La creciente presión que se ha venido ejerciendo sobre los recursos hídricos ha hecho que los impactos de la sequía se hayan visto agravados a la vez que ha desencadenado situaciones de escasez de agua en muchas partes del planeta. Los países con clima mediterráneo son especialmente vulnerables a las sequías, y, su crecimiento económico dependiente del agua da lugar a impactos importantes. Para reducir los impactos de la sequía es necesaria una reducción de la vulnerabilidad a las sequías que viene dada por una gestión más eficiente y por una mejor preparación. Para ello es muy importante disponer de información acerca de los impactos y el alcance de este fenómeno natural. Esta investigación trata de abarcar el tema de los impactos de las sequías, de manera que plantea todos los tipos de impactos que pueden darse y además compara sus efectos en dos países (España y Chile). Para ello se proponen modelos de atribución de impactos que sean capaces de medir las pérdidas económicas causadas por la falta de agua. Los modelos propuestos tienen una base econométrica en la que se incluyen variables clave a la hora de evaluar los impactos como es una variable relacionada con la disponibilidad de agua, y otras de otra naturaleza para distinguir los efectos causados por otras fuentes de variación. Estos modelos se adaptan según la fase del estudio en la que nos encontremos. En primer lugar se miden los impactos directos sobre el regadío y se introduce en el modelo un factor de aleatoriedad para evaluar el riesgo económico de sequía. Esto se hace a dos niveles geográficos (provincial y de Unidad de Demanda Agraria) y además en el último se introduce no solo el riesgo de oferta sino también el riesgo de demanda de agua. La introducción de la perspectiva de riesgo en el modelo da lugar a una herramienta de gestión del riesgo económico que puede ser utilizada para estrategias de planificación. Más adelante una extensión del modelo econométrico se desarrolla para medir los impactos en el sector agrario (impactos directos sobre el regadío y el secano e impactos indirectos sobre la Agro Industria) para ello se adapta el modelo y se calculan elasticidades concatenadas entre la falta de agua y los impactos secundarios. Por último se plantea un modelo econométrico para el caso de estudio en Chile y se evalúa el impacto de las sequías debidas al fenómeno de La Niña. iv Los resultados en general muestran el valor que brinda el conocimiento más preciso acerca de los impactos, ya que en muchas ocasiones se tiende a sobreestimar los daños realmente producidos por la falta de agua. Los impactos indirectos de la sequía confirman su alcance a la vez que son amortiguados a medida que nos acercamos al ámbito macroeconómico. En el caso de Chile, su diferente gestión muestra el papel que juegan el fenómeno de El Niño y La Niña sobre los precios de los principales cultivos del país y sobre el crecimiento del sector. Para reducir las pérdidas y su alcance se deben plantear más medidas de mitigación que centren su esfuerzo en una gestión eficiente del recurso. Además la prevención debe jugar un papel muy importante para reducir los riesgos que pueden sufrirse ante situaciones de escasez. ABSTRACT Drought is a natural phenomenon that originates by the decrease in rainfall in comparison to the average, and that results in water shortages for some activities. The increasing pressure on water resources has augmented the impact of droughts just as water scarcity has become an additional problem in many parts of the planet. Countries with Mediterranean climate are especially vulnerable to drought, and its waterdependent economic growth leads to significant impacts. To reduce the negative impacts it is necessary to deal with drought vulnerability, and to achieve this objective a more efficient management is needed. The availability of information about the impacts and the scope of droughts become highly important. This research attempts to encompass the issue of drought impacts, and therefore it characterizes all impact types that may occur and also compares its effects in two different countries (Spain and Chile). Impact attribution models are proposed in order to measure the economic losses caused by the lack of water. The proposed models are based on econometric approaches and they include key variables for measuring the impacts. Variables related to water availability, crop prices or time trends are included to be able to distinguish the effects caused by any of the possible sources. These models are adapted for each of the parts of the study. First, the direct impacts on irrigation are measured and a source of variability is introduced into the model to assess the economic risk of drought. This is performed at two geographic levels provincial and Agricultural Demand Unit. In the latter, not only the supply risk is considered but also the water demand risk side. The introduction of the risk perspective into the model results in a risk management tool that can be used for planning strategies. Then an extension of the econometric model is developed to measure the impacts on the agricultural sector (direct impacts on irrigated and rainfed productions and indirect impacts on the Agri-food Industry). For this aim the model is adapted and concatenated elasticities between the lack of water and the impacts are estimated. Finally an econometric model is proposed for the Chilean case study to evaluate the impact of droughts, especially caused by El Niño Southern Oscillation. The overall results show the value of knowing better about the precise impacts that often tend to be overestimated. The models allow for measuring accurate impacts due to the lack of water. Indirect impacts of drought confirm their scope while they confirm also its dilution as we approach the macroeconomic variables. In the case of Chile, different management strategies of the country show the role of ENSO phenomena on main crop prices and on economic trends. More mitigation measures focused on efficient resource management are necessary to reduce drought losses. Besides prevention must play an important role to reduce the risks that may be suffered due to shortages.

Integration of Timetable Planning and Rolling Stock in Rapid Transit Networks

The aim of this paper is to propose an integrated planning model to adequate the offered capacity and system frequencies to attend the increased passenger demand and traffic congestion around urban and suburban areas. The railway capacity is studied in line planning, however, these planned frequencies were obtained without accounting for rolling stock flows through the rapid transit network. In order to provide the problem more freedom to decide rolling stock flows and therefore better adjusting these flows to passenger demand, a new integrated model is proposed, where frequencies are readjusted. Then, the railway timetable and rolling stock assignment are also calculated, where shunting operations are taken into account. These operations may sometimes malfunction, causing localized incidents that could propagate throughout the entire network due to cascading effects. This type of operations will be penalized with the goal of selectively avoiding them and ameliorating their high malfunction probabilities. Swapping operations will also be ensured using homogeneous rolling stock material and ensuring parkings in strategic stations. We illustrate our model using computational experiments drawn from RENFE (the main Spanish operator of suburban passenger trains) in Madrid, Spain. The results show that through this integrated approach a greater robustness degree can be obtained

Use of prediction methods for patent and trademark applications in Spain

Patent and trademark offices which run according to principles of new management have an inherent need for dependable forecasting data in planning capacity and service levels. The ability of the Spanish Office of Patents and Trademarks to carry out efficient planning of its resource needs requires the use of methods which allow it to predict the changes in the number of patent and trademark applications at different time horizons. The approach for the prediction of time series of Spanish patents and trademarks applications (1979e2009) was based on the use of different techniques of time series prediction in a short-term horizon. The methods used can be grouped into two specifics areas: regression models of trends and time series models. The results of this study show that it is possible to model the series of patents and trademarks applications with different models, especially ARIMA, with satisfactory model adjustment and relatively low error.

Comparasion of road traffic emission models in Madrid (Spain)

Many cities in Europe have difficulties to meet the air quality standards set by the European legislation, most particularly the annual mean Limit Value for NO2. Road transport is often the main source of air pollution in urban areas and therefore, there is an increasing need to estimate current and future traffic emissions as accurately as possible. As a consequence, a number of specific emission models and emission factors databases have been developed recently. They present important methodological differences and may result in largely diverging emission figures and thus may lead to alternative policy recommendations. This study compares two approaches to estimate road traffic emissions in Madrid (Spain): the COmputer Programme to calculate Emissions from Road Transport (COPERT4 v.8.1) and the Handbook Emission Factors for Road Transport (HBEFA v.3.1), representative of the ‘average-speed’ and ‘traffic situation’ model types respectively. The input information (e.g. fleet composition, vehicle kilometres travelled, traffic intensity, road type, etc.) was provided by the traffic model developed by the Madrid City Council along with observations from field campaigns. Hourly emissions were computed for nearly 15 000 road segments distributed in 9 management areas covering the Madrid city and surroundings. Total annual NOX emissions predicted by HBEFA were a 21% higher than those of COPERT. The discrepancies for NO2 were lower (13%) since resulting average NO2/NOX ratios are lower for HBEFA. The larger differences are related to diesel vehicle emissions under “stop & go” traffic conditions, very common in distributor/secondary roads of the Madrid metropolitan area. In order to understand the representativeness of these results, the resulting emissions were integrated in an urban scale inventory used to drive mesoscale air quality simulations with the Community Multiscale Air Quality (CMAQ) modelling system (1 km2 resolution). Modelled NO2 concentrations were compared with observations through a series of statistics. Although there are no remarkable differences between both model runs, the results suggest that HBEFA may overestimate traffic emissions. However, the results are strongly influenced by methodological issues and limitations of the traffic model. This study was useful to provide a first alternative estimate to the official emission inventory in Madrid and to identify the main features of the traffic model that should be improved to support the application of an emission system based on “real world” emission factors.

Micropiling a damaged bridge in construction in the motorway M-410 in Madrid (Spain)

The new highway M-410 in Madrid was constructed in the year 2007. This motorway near to Parla city crosses the road from Madrid to Toledo. To solve this crossing it was needed to constructed three bridges, the central with two spans over de existing motorway and the other two with one span at each side of the previous one. All the bridges where with deep foundations with piles of 1,00 m diameter separated 1,25 m.

Strengthening and rehabilitation of two damaged bridges in the motorway M-410 in Madrid (Spain)

The new highway M-410 in Madrid was constructed in the year 2007. This motorway near to Parla city crosses the road from Madrid to Toledo. To solve this crossing it was needed to constructed three bridges, the central with two spans over the existing motorway and the other two with one span at each side of the previous one.

The first renewable forward market mechanisms in the Iberian Electricity Market

A description of the first renewable forward market mechanisms in the Iberian Electricity Market is provided. A contract for difference mechanism is available in Spain since March 2011between the last resort suppliers and the special regime (renewables and cogeneration) settling the price differences between the equilibrium price of the forward regulated auctions for the last resort supply and the spot price of the corresponding delivery period. Regulated auctions of baseload futures of the Portuguese zone in which the Portuguese last resort supplier sells the special regime production exist since December 2011. The experience gained from renewables auctions in Latin America could be used in the Iberian Electricity market, complementing these first market mechanisms. Introduction of renewable auctions at least for the most mature technologies (i.e. wind) in Spain and Portugal providing a fair price for the renewable generation will be of utmost importance in the short term to diminish the tariff deficit caused by the massive deployment of the feed-in-tariff scheme. Liquidity in the forward markets will also increase as a result of the entry of renewable generation companies intending to maximize their profits due to gradual suppression of feed in tariff schemes.

An approach to stakeholders involvement in the preparedness for nuclear and radiological emergency response & recovery in Spain

The elaboration of a generic decision-making strategy to address the evolution of an emergency situation, from the stages of response to recovery, and including a planning stage, can facilitate timely, effective and consistent decision making by the response organisations at every level within the emergency management structure and between countries, helping to ensure optimal protection of health, environment, and society. The degree of involvement of stakeholders in this process is a key strategic element for strengthening the local preparedness and response and can help a successful countermeasures strategy. A significant progress was made with the multi-national European project EURANOS (2004-2009) which brought together best practice, knowledge and technology to enhance the preparedness for Europe's response to any radiation emergency and long term contamination. The subsequent establishment of a European Technology Platform and the recent launch of the research project NERIS-TP ("Towards a self sustaining European Technology Platform (NERIS-TP) on Preparedness for Nuclear and Radiological Emergency Response and Recovery") are aimed to continue with the remaining tasks for gaining appropriate levels of emergency preparedness at local level in most European countries. One of the objectives of the NERIS-TP project is: Strengthen the preparedness at the local/national level by setting up dedicated fora and developing new tools or adapting the tools developed within the EURANOS projects (such as the governance framework for preparedness, the handbooks on countermeasures, the RODOS system, and the MOIRA DSS for long term contamination in catchments) to meet the needs of local communities. CIEMAT and UPM in close interaction with the Nuclear Safety Council will explore, within this project, the use and application in Spain of such technical tools, including other national tools and information and communication strategies to foster cooperation between local, national and international stakeholders. The aim is identify and involve relevant stakeholders in emergency preparedness to improve the development and implementation of appropriate protection strategies as part of the consequence management and the transition to recovery. In this paper, an overview of the "state of the art" on this area in Spain and the methodology and work Plan proposed by the Spanish group within the project NERIS to grow the stakeholder involvement in the preparedness to emergency response and recovery is presented.

Damage assessment on building structures subjected to the recent near-fault earthquake in Lorca (Spain)

The city of Lorca (Spain) was hit on May 11th 2011 by two consecutive earthquakes with 4.6 and 5.2 Mw respectively, causing casualties and important damage in buildings. Lorca is located in the south-east region of Spain and settled on the trace of the Murcia-Totana-Lorca fault. Although the magnitudes of these ground motions were not severe, the damage observed was considerable over a great amount of buildings. More than 300 of them have been demolished and many others are being retrofitted. This paper reports a field study on the damage caused by these earthquakes. The observed damage is related with the structural typology. Further, prototypes of the damaged buildings are idealized with nonlinear numerical models and their seismic behavior and proneness to damage concentration is further investigated through dynamic response analyses.

Economics and forecast of energy consumption in NGN networks: the case of Spain

Reducing energy consumption is one of the main goals of sustainability planning in most countries. For instance in Europe, the EC established the objectives in the Communication “20 20 by 2020 Europe's climate change opportunity”.

Energy Consumption Forecast in 4G Networks: The Case of Spain

Reducing energy consumption is one of the main goals of sustainability planning in most countries. For instance in Europe, the EC established the objectives in the Communication “20 20 by 2020 Europe's climate change opportunity”. • Next Generation Networks (NGN)  One of the most relevant upcoming ICT development • The role of energy consumption seems mostly absent from the main analysis and the debate on NGN deployment.

Seismic Risk Scenarios in Puerto Principe (Haiti). A Tool for Reconstruction and Emergency Planning

The 12 January 2010, an earthquake hit the city of Port-au-Prince, capital of Haiti. The earthquake reached a magnitude Mw 7.0 and the epicenter was located near the town of Léogâne, approximately 25 km west of the capital. The earthquake occurred in the boundary region separating the Caribbean plate and the North American plate. This plate boundary is dominated by left-lateral strike slip motion and compression, and accommodates about 20 mm/y slip, with the Caribbean plate moving eastward with respect to the North American plate (DeMets et al., 2000). Initially the location and focal mechanism of the earthquake seemed to involve straightforward accommodation of oblique relative motion between the Caribbean and North American plates along the Enriquillo-Plantain Garden fault system (EPGFZ), however Hayes et al., (2010) combined seismological observations, geologic field data and space geodetic measurements to show that, instead, the rupture process involved slip on multiple faults. Besides, the authors showed that remaining shallow shear strain will be released in future surface-rupturing earthquakes on the EPGFZ. In December 2010, a Spanish cooperation project financed by the Politechnical University of Madrid started with a clear objective: Evaluation of seismic hazard and risk in Haiti and its application to the seismic design, urban planning, emergency and resource management. One of the tasks of the project was devoted to vulnerability assessment of the current building stock and the estimation of seismic risk scenarios. The study was carried out by following the capacity spectrum method as implemented in the software SELENA (Molina et al., 2010). The method requires a detailed classification of the building stock in predominant building typologies (according to the materials in the structure and walls, number of stories and age of construction) and the use of the building (residential, commercial, etc.). Later, the knowledge of the soil characteristics of the city and the simulation of a scenario earthquake will provide the seismic risk scenarios (damaged buildings). The initial results of the study show that one of the highest sources of uncertainties comes from the difficulty of achieving a precise building typologies classification due to the craft construction without any regulations. Also it is observed that although the occurrence of big earthquakes usually helps to decrease the vulnerability of the cities due to the collapse of low quality buildings and the reconstruction of seismically designed buildings, in the case of Port-au-Prince the seismic risk in most of the districts remains high, showing very vulnerable areas. Therefore the local authorities have to drive their efforts towards the quality control of the new buildings, the reinforcement of the existing building stock, the establishment of seismic normatives and the development of emergency planning also through the education of the population.