The history of technology in education. A comparative study and forecast

Area, launched in 1999 with the Bologna Declaration, has bestowed such a magnitude and unprecedented agility to the transformation process undertaken by European universities. However, the change has been more profound and drastic with regards to the use of new technologies both inside and outside the classroom. This article focuses on the study and analysis of the technology’s history within the university education and its impact on teachers, students and teaching methods. All the elements that have been significant and innovative throughout the history inside the teaching process have been analyzed, from the use of blackboard and chalk during lectures, the use of slide projectors and transparent slides, to the use of electronic whiteboards and Internet nowadays. The study is complemented with two types of surveys that have been performed among teachers and students during the school years 1999 - 2011 in the School of Civil Engineering at the Polytechnic University of Madrid. The pros and cons of each of the techniques and methodologies used in the learning process over the last decades are described, unfolding how they have affected the teacher, who has evolved from writing on a whiteboard to project onto a screen, the student, who has evolved from taking handwritten notes to download information or search the Internet, and the educational process, that has evolved from the lecture to acollaborative learning and project-based learning. It is unknown how the process of learning will evolve in the future, but we do know the consequences that some of the multimedia technologies are having on teachers, students and the learning process. It is our goal as teachers to keep ourselves up to date, in order to offer the student adequate technical content, while providing proper motivation through the use of new technologies. The study provides a forecast in the evolution of multimedia within the classroom and the renewal of the education process, which in our view, will set the basis for future learning process within the context of this new interactive era.

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Integration of cooperation for development in Survey Engineering curricula at the European Higher Education Area (EHEA) framework

Survey Engineering curricula involves the integration of many formal disciplines at a high level of proficiency. The Escuela de Ingenieros en Topografía, Cartografía y Geodesia at Universidad Politécnica de Madrid (Survey Engineering) has developed an intense and deep teaching on so-called Applied Land Sciences and Technologies or Land Engineering. However, new approaches are encouraged by the European Higher Education Area (EHEA). This fact requires a review of traditional teaching and methods. Furthermore, the new globalization and international approach gives new ways to this discipline to teach and learn about how to bridge gap between cultures and regions. This work is based in two main needs. On one hand, it is based on integration of basic knowledge and disciplines involved in typical Survey Engineering within Land Management. On the other, there is an urgent need to consider territory on a social and ethical basis, as far as a part of the society, culture, idiosyncrasy or economy. The integration of appropriate knowledge of the Land Management is typically dominated by civil engineers and urban planners. It would be very possible to integrate Survey Engineering and Cooperation for Development in the framework of Land Management disciplines. Cooperation for Development is a concept that has changed since beginning of its use until now. Development projects leave an impact on society in response to their beneficiaries and are directed towards self-sustainability. Furthermore, it is the true bridge to reduce gap between societies when differences are immeasurable. The concept of development has also been changing and nowadays it is not a purely economic concept. Education, science and technology are increasingly taking a larger role in what is meant by development. Moreover, it is commonly accepted that Universities should transfer knowledge to society, and the transfer of knowledge should be open to countries most in need for developing. If the importance of the country development is given by education, science and technology, knowledge transfer would be one of the most clear of ways of Cooperation for Development. Therefore, university cooperation is one of the most powerful tools to achieve it, placing universities as agents of development. In Spain, the role of universities as agents of development and cooperation has been largely strengthened. All about this work deals to how to implement both Cooperation for Development and Land Management within Survey Engineering at the EHEA framework.

Repercusión y análisis de las nuevas tecnologías en el entorno educativo del siglo XXI

Desde que se implantó la Sociedad de la Información, educadores e investigadores de todo el mundo han discutido y reflexionado sobre temáticas acerca de cómo deben ser usadas las Tecnologías de la Información y la Comunicación (TIC) para apoyar los aprendizajes, y cómo estas herramientas pueden ser útiles para mejorar los resultados académicos. Vivimos en una sociedad dinámica, sujeta a continuos cambios que afectan a cada una de los sectores de nuestra vida. El auge de las TIC ha transformado nuestro modo de pensar, de relacionarnos e incluso la manera de enseñar y de aprender. De ahí que la incorporación de las TIC a la sociedad en general y, de forma específica, al mundo de la educación se perciba hoy, como una realidad cada vez más consolidada y también como una necesidad. Por eso, este trabajo tiene como objetivo fundamental la evaluación de la implantación y el desarrollo que la educación y las TIC han tenido desde comienzos del siglo XXI hasta nuestros días. Este trabajo se dividirá en dos partes diferenciadas y complementarias. En una primera sección se presenta el marco teórico de los pilares fundamentales que sustentan la interacción entre educación y nuevas tecnologías y lo que ello conlleva. Un segundo apartado presenta el diseño metodológico de la investigación y los resultados alcanzados al aplicar instrumentos de evaluación en un centro escolar y su posterior análisis e interpretación de los resultados en referencia al impacto de las nuevas tecnologías en las aulas. ABSTRACT Since Information Society was introduced, educators and researchers from around the world have discussed and have reflected on issues about how the Information Technology and Communication (ICT) must be used to support learning, and how these tools can be useful for improving academic outcomes. We live in a dynamic society that is subject to continuous changes affecting every sector of our life. The growth of ICT has transformed the way we think and interact and even the way of teaching and learning. Hence, the incorporation of ICT in society in general and, specifically, in the world of education today is perceived as an increasingly consolidated reality and also as a necessity. Therefore, this work has as main objective the evaluation of the implementation and the development that education and ICT have had since the beginning of the XXI century to today. This work is divided into two distinct and complementary parts. The first section presents the theoretical framework of the pillars that support the interaction between education and new technology and what it entails. The second section presents the methodology of the research and results achieved by applying assessment instruments in a school and its subsequent analysis and interpretation of the results concerning to the impact of new technologies in the classrooms.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.

Programming assignments automatic grading: review of tools and implementations

Automatic grading of programming assignments is an important topic in academic research. It aims at improving the level of feedback given to students and optimizing the professor time. Several researches have reported the development of software tools to support this process. Then, it is helpfulto get a quickly and good sight about their key features. This paper reviews an ample set of tools forautomatic grading of programming assignments. They are divided in those most important mature tools, which have remarkable features; and those built recently, with new features. The review includes the definition and description of key features e.g. supported languages, used technology, infrastructure, etc. The two kinds of tools allow making a temporal comparative analysis. This analysis infrastructure, etc. The two kinds of tools allow making a temporal comparative analysis. This analysis shows good improvements in this research field, these include security, more language support, plagiarism detection, etc. On the other hand, the lack of a grading model for assignments is identified as an important gap in the reviewed tools. Thus, a characterization of evaluation metrics to grade programming assignments is provided as first step to get a model. Finally new paths in this research field are proposed.

A model-driven approach to teaching concurrency

We present an undergraduate course on concurrent programming where formal models are used in different stages of the learning process. The main practical difference with other approaches lies in the fact that the ability to develop correct concurrent software relies on a systematic transformation of formal models of inter-process interaction (so called shared resources), rather than on the specific constructs of some programming language. Using a resource-centric rather than a language-centric approach has some benefits for both teachers and students. Besides the obvious advantage of being independent of the programming language, the models help in the early validation of concurrent software design, provide students and teachers with a lingua franca that greatly simplifies communication at the classroom and during supervision, and help in the automatic generation of tests for the practical assignments. This method has been in use, with slight variations, for some 15 years, surviving changes in the programming language and course length. In this article, we describe the components and structure of the current incarnation of the course?which uses Java as target language?and some tools used to support our method. We provide a detailed description of the different outcomes that the model-driven approach delivers (validation of the initial design, automatic generation of tests, and mechanical generation of code) from a teaching perspective. A critical discussion on the perceived advantages and risks of our approach follows, including some proposals on how these risks can be minimized. We include a statistical analysis to show that our method has a positive impact in the student ability to understand concurrency and to generate correct code.

Teaching automatic control in non-specialist engineering schools

Automatic Control Teaching in the new degree syllabus has reduced both, its contents and its implementation course, with regard to traditional engineering careers. On the other hand, where the qualification is not considered as automatic control specialist, it is required an adapted methodology to provide the minimum contents that the student needs to assimilate, even in the case that students do not perceive these contents as the most important in their future career. In this paper we present the contents of a small automatic course taught Naval Architecture and Marine Engineering Degrees at the School of Naval Engineering of the Polytechnic University of Madrid. We have included the contents covered using the proposed methodology which is based on practical work after lectures. Firstly, the students performed exercises by hand. Secondly, they solve the exercises using informatics support tools, and finally, they validate their previous results and their knowledge in the laboratory platforms.

Using Knowledge Modelling Tools for Agent-Based Systems: The Experience of KSM

The aim of this chapter is to discuss the applicability of recently proposed knowledge modelling tools to the development of agent-based systems. The discussion is derived from the real world experience of a particular software tool called KSM (Knowledge Structure Manager). The chapter provides details about this tool and then proceeds to show in which forms the software may be used to support the development of agent-based systems. Two multiagent systems, one in the field of telecommunications management and the other one in the field of flood control, are described. Conclusions about these studies are presented, summarizing the main contributions that knowledge modelling tools can bring to the development of agent-based systems.

Teaching and evaluating mechanical vibrations with Matlab®

The study of the response of mechanical systems to external excitations, even in the simplest cases, involves solving second-order ordinary differential equations or systems thereof. Finding the natural frequencies of a system and understanding the effect of variations of the excitation frequencies on the response of the system are essential when designing mechanisms [1] and structures [2]. However, faced with the mathematical complexity of the problem, students tend to focus on the mathematical resolution rather than on the interpretation of the results. To overcome this difficulty, once the general theoretical problem and its solution through the state space [3] have been presented, Matlab®[4] and Simulink®[5] are used to simulate specific situations. Without them, the discussion of the effect of slight variations in input variables on the outcome of the model becomes burdensome due to the excessive calculation time required. Conversely, with the help of those simulation tools, students can easily reach practical conclusions and their evaluation can be based on their interpretation of results and not on their mathematical skills

Nuevos métodos y herramientas para la creación y utilización de recursos multimedia en la educación

La educación y los entornos educativos están en constante evolución. Tanto alumnos como educadores cambian de hábitos, de maneras de aprender, de gustos, de dispositivos que manejan y de aplicaciones que usan regularmente entre otras cosas. Todos estos cambios vienen acompañados y fomentados en gran medida por la evolución paralela que experimenta la tecnología, tanto software en los programas utilizados, como hardware en los dispositivos y capacidades de éstos. La educación debe también adaptarse a estos cambios, tanto personales como tecnológicos y sacar el mayor provecho de ellos. El uso de Sistemas de Gestión del Aprendizaje está muy extendido en todos los centros educativos. Estos sistemas poseen un gran número de características y funcionalidades que permiten desde la aplicación de un modelo didáctico totalmente tradicional en el que el profesor imparte un contenido y los alumnos lo reciben a uno totalmente innovador en el que ocurren procesos totalmente diferentes. Por otro lado, el potencial que ofrecen los recursos multimedia no ha sido completamente aprovechado en la educación y supone una gran oportunidad. Esta tesis doctoral propone un conjunto de métodos y herramientas para la creación y el uso de recursos multimedia en la educación. Para ello el desarrollo de esta tesis parte de la definición de un modelo didáctico social, colaborativo y centrado en el alumno que servirá de hilo conductor y que integrará los diferentes y métodos y herramientas estudiados y desarrollados. En un primer paso se identifican varias herramientas y métodos para el aula, tales son la grabación de clases, donde se crea y posteriormente se mejora un carrito portátil de grabación que da muy buen resultado, las herramientas de grabación de screencast y la videoconferencia. Estas herramientas además se integran en una plataforma colaborativa dando lugar a una arquitectura completa y escalable que permite la realización de dichas actividades y la interconexión sencilla con el Sistema de Gestión del Aprendizaje. A continuación y ya en un entorno totalmente online se desarrolla una nueva plataforma de e-learning llamada Virtual Science Hub (ViSH) que consta de cuatro funcionalidades principales, red social, videoconferencia, repositorio educativo y herramienta de autor. En esta plataforma se aplicaron técnicas de recomendación proactiva tanto de recursos educativos como de otros usuarios similares. Por último se validó el modelo educativo completo usando algunas de las herramientas identificadas y desarrolladas en dos escenarios diferentes con gran éxito. Finalmente, esta tesis discute las conclusiones obtenidas a lo largo de la extensa investigación llevada a cabo y que ha propiciado la consecución de una buena base teórica y práctica para la creación de herramientas y métodos para la generación y el uso de recursos multimedia en la educación. ABSTRACT Education and learning environments are constantly evolving. Students and educators change the things their habits, their ways of learning, the things they like or the devices and applications that they use regularly among other things. All these changes are accompanied and fostered by the parallel evolution that technology experiences, both in the software programs used as in the hardware and capabilities of these devices. Education must also adapt to these changes, both personal and technological and get the most out of them. Learning Management Systems are widely used in all educational centers. These systems have a large number of features and functionalities. They allow from the implementation of a traditional teaching model in which the teacher gives content and students receive it to one absolutely innovative teaching model where totally different processes occur. Furthermore, the potential of multimedia resources has not been fully exploited in education and can be a great opportunity. This thesis proposes a set of methods and tools for the creation and use of multimedia in education. The development of this thesis starts with the definition of a social, collaborative and learner-centered model, that serves as a common thread and that integrates different tools and methods studied and developed. In a first step, several tools and methods for the classroom are identified, such as recording, where a portable kit is created and then improved giving very good results, screencast recording and videoconferencing. These tools also are integrated into a collaborative platform resulting in a complete, scalable architecture that enables the execution of such activities and a simple interconnection with the Learning Management System. In an fully online environment a new e-learning platform called Virtual Science Hub (ViSH) is created. It consists of four main features that combine and complement each other, social network, videoconferencing, educational repository and authoring tool. In this platform proactive recommendation of both educational resources and similar users is applied. In a last step the entire educational model using some of the tools identified and developed is successfully validated in two different scenarios. Finally, this thesis discusses the findings obtained during the extensive research carried out and has led to the achievement of a good theoretical and practical basis for the development of tools and methods for the generation and use of multimedia in education.

Integration of a data acquisition system based on FlexRIO technology with EPICS

EPICS (Experimental Physics and Industrial Control System) lies in a set of software tools and applications which provide a software infrastructure for building distributed data acquisition and control systems. Currently there is an increase in use of such systems in large Physics experiments like ITER, ESS, and FREIA. In these experiments, advanced data acquisition systems using FPGA-based technology like FlexRIO are more frequently been used. The particular case of ITER (International Thermonuclear Experimental Reactor), the instrumentation and control system is supported by CCS (CODAC Core System), based on RHEL (Red Hat Enterprise Linux) operating system, and by the plant design specifications in which every CCS element is defined either hardware, firmware or software. In this degree final project the methodology proposed in Implementation of Intelligent Data Acquisition Systems for Fusion Experiments using EPICS and FlexRIO Technology Sanz et al. [1] is used. The final objective is to provide a document describing the fulfilled process and the source code of the data acquisition system accomplished. The use of the proposed methodology leads to have two diferent stages. The first one consists of the hardware modelling with graphic design tools like LabVIEWFPGA which later will be implemented in the FlexRIO device. In the next stage the design cycle is completed creating an EPICS controller that manages the device using a generic device support layer named NDS (Nominal Device Support). This layer integrates the data acquisition system developed into CCS (Control, data access and communication Core System) as an EPICS interface to the system. The use of FlexRIO technology drives the use of LabVIEW and LabVIEW FPGA respectively. RESUMEN. EPICS (Experimental Physics and Industrial Control System) es un conjunto de herramientas software utilizadas para el desarrollo e implementación de sistemas de adquisición de datos y control distribuidos. Cada vez es más utilizado para entornos de experimentación física a gran escala como ITER, ESS y FREIA entre otros. En estos experimentos se están empezando a utilizar sistemas de adquisición de datos avanzados que usan tecnología basada en FPGA como FlexRIO. En el caso particular de ITER, el sistema de instrumentación y control adoptado se basa en el uso de la herramienta CCS (CODAC Core System) basado en el sistema operativo RHEL (Red Hat) y en las especificaciones del diseño del sistema de planta, en la cual define todos los elementos integrantes del CCS, tanto software como firmware y hardware. En este proyecto utiliza la metodología propuesta para la implementación de sistemas de adquisición de datos inteligente basada en EPICS y FlexRIO. Se desea generar una serie de ejemplos que cubran dicho ciclo de diseño completo y que serían propuestos como casos de uso de dichas tecnologías. Se proporcionará un documento en el que se describa el trabajo realizado así como el código fuente del sistema de adquisición. La metodología adoptada consta de dos etapas diferenciadas. En la primera de ellas se modela el hardware y se sintetiza en el dispositivo FlexRIO utilizando LabVIEW FPGA. Posteriormente se completa el ciclo de diseño creando un controlador EPICS que maneja cada dispositivo creado utilizando una capa software genérica de manejo de dispositivos que se denomina NDS (Nominal Device Support). Esta capa integra la solución en CCS realizando la interfaz con la capa EPICS del sistema. El uso de la tecnología FlexRIO conlleva el uso del lenguaje de programación y descripción hardware LabVIEW y LabVIEW FPGA respectivamente.

Pietilä: El proyecto de Dipoli

Dipoli es un edificio plurifuncional localizado en el campus de Otaniemi que acoge los servicios generales del alumnado. Tanto encargo como propiedad pertenecía, hasta 2013, a la Asociación de Estudiantes de Helsinki University of Technology TKK (actualmente conocida como Aalto University), cuando se vendió y traspasó a la propia universidad. La tesis estudia este proyecto (1961-66) como uno de los ejemplos más significativos de la obra de los arquitectos Reima (1923-93)y Raili Pietilä (1926-), quienes se unieron tanto personal como profesionalmente el mismo año de la convocatoria del concurso (1961). Debido a la dificultad del encargo por la dimensión y flexibilidad de los espacios requeridos, el primer premio quedó desierto puesto que ninguna propuesta cumplía con todos los requisitos establecidos. El jurado otorgó el segundo premio a su proyecto junto con Osmo Lappo y solicitó posteriormente a ambos un desarrollo más profundo del mismo. Finalmente optaron por construir el edificio planteado por los Pietilä. En él debía desarrollarse un amplio abanico de actividades sociales como reuniones, entretenimiento nocturno, actuaciones, proyecciones de películas, cenas y bailes, así como servir de comedor durante los meses de invierno y espacio destinado a congresos en la época estival. Además, en dicho edificio se pretendía acoger el Sindicato de Estudiantes de la Universidad Tecnológica de Helsinki y se localizaría en el nuevo campus de Otaniemi a escasos kilómetros de la capital, donde Alvar Aalto ya estaba diseñando varios equipamientos universitarios siguiendo el planeamiento general que proyectó en el concurso de 1949. El elemento más característico de este proyecto es la cubierta, una estructura continua formada a partir de un caparazón hueco de hormigón in situ capaz de absorber dos lenguajes diferentes y generar, bajo ella, un espacio singular con multitud de posibilidades funcionales. Su geometría permite dividir el programa en estancias de menor tamaño sin perder ni la identidad ni unidad formal. La manera en que se iluminan los espacios bajo ella se consigue de formas diferentes: si bien la volumetría de líneas cartesianas presenta un sistema de aperturas longitudinales por donde penetra la luz cenital, en la forma más libre aparecen un conjunto de lucernarios de diferente tamaños y posiciones aparentemente aleatorias que introducen la luz natural por el plano del techo de forma más controlada, apoyada por la disposición de las ventanas perimetrales. El juego de espesores de la cubierta ofrece un conjunto de matices que pretenden resolver los tres condicionantes principales del proyecto, la adecuación de los usos en su interior, la compatibilidad de circulaciones de los usuarios y la inserción en el lugar. La percepción de este plano horizontal atraviesa lecturas múltiples, desde su uso primario de cubrición y cuya distancia con el plano del suelo se comprime para tensionar la grieta de luz al tiempo que ofrece nuevas relaciones con el paisaje hasta convertirse en fachada al apoyarse en el suelo y crear un límite físico entre interior y exterior. El objetivo fundamental de la tesis es entender mejor la traza particular de Dipoli desde una visión rigurosa que amplíe el conocimiento del edificio y al mismo tiempo explique el espacio propuesto a través de las diferentes herramientas de proyecto. Para ello se ha elaborado una documentación de la obra que parte de recopilar, seleccionar y redibujar la información existente desde el estado previo a la construcción del objeto terminado. El sentido de volver al Centro de Estudiantes de Otaniemi, supone, además de ayudar a comprender el trabajo de sus autores, entender el proceso de la historia de la arquitectura finlandesa y detectar relaciones con otras obras más lejanas con las que pudiese compartir ciertos valores, facilitando un entendimiento más global de la historia. Esta investigación se inicia desde la hipótesis que la forma final del edificio y su relación con el lugar, para proponer un tipo de arquitectura que confía en la observación sensible del programa, del uso, de las escalas de los espacios, del movimiento de las personas y su relación y anclaje con el lugar. Y en este sentido, el trabajo se desarrolla guiado por estos aspectos que se manifiestan también desde la influencia y comprensión de otros trabajos propios y ajenos. Para detectar las claves de proyecto que les han permitido la construcción espacial y formal de su arquitectura, entendiendo éstas como el conjunto de herramientas y mecanismos que reflexionan sobre una particular composición volumétrica y espacios dinámicos que ofrecen un aspecto exterior expresivo, la tesis se articula sobre dos capítulos principales “Contextos” y “Proyecto y Construcción” donde se quiere estudiar el proyecto en su forma más completa. Esta pareja de apartados aborda la descripción del marco temporal, físico, cultural, personal y profesional de los arquitectos, el análisis y síntesis de la propuesta y, por último, la repercusión del proyecto. Contextos pretende ubicar la obra además de facilitar la comprensión del conjunto de aspectos y condicionantes que determinaron la materialización de Dipoli. Este capítulo se subdivide a su vez en cinco apartados: Contexto Histórico, Físico y Cultural, Personal, Profesional e Incidencia de Dipoli. El Contexto histórico se centra en la descripción pormenorizada del conjunto de situaciones que influyen en el arquitecto cuando se toman decisiones durante el proceso de proyectar. El objetivo es definir los condicionantes que pueden haber afectado directa o indirectamente la obra. El capítulo comienza subrayando los temas de interés comunes para el resto de sus homólogos finlandeses. Principalmente se centra en la década de 1950 como etapa previa a la gestación de Dipoli. También atiende el proceso de evolución de la arquitectura finlandesa desde finales del S.XIX unido a la crisis de identidad nacional que el maestro Alvar Aalto superará por sus obras pero también por su personalidad y supondrá una gran sombra al resto de sus compañeros en el marco nacional e internacional provocando una reacción contraria a sus proyectos y persona entre el resto de arquitectos. Por este motivo, al tiempo que se gestaba el proyecto de Dipoli emergieron un grupo de profesionales que defendían fuertemente las trazas cartesianas del racionalismo como Aulis Blomstedt o Juhani Pallasmaa y que consiguieron abrir una nueva perspectiva intelectual. Por tanto será inevitable que la presencia del maestro nórdico Alvar Aalto aparezca a lo largo de toda la tesis, permitiéndonos un mejor entendimiento de la carga orgánica y humana de sus trabajos desde la perspectiva de los Pietilä. Posteriormente este capítulo desgrana aquellos intereses que dominaban el marco arquitectónico internacional y que pudieron influir en las soluciones planteadas. Dipoli será puesto en relación a diversas arquitecturas contemporáneas que presentan un enfoque diferente al esbozado por el Movimiento Moderno y cuyo marco de referencias guarda algún tipo de relación con los mismos temas de proyecto. Es el caso del grupo Team 10 o determinados ejemplos de arquitectos alemanes como Hugo Häring y Hans Scharoun, incluso puntos en común con el sistema constructivista del vanguardismo soviético. Estas relaciones con otras arquitecturas matizan su carácter singular e incluso se revisa en qué medida esta propuesta amplifica los aspectos que comparten. En cuanto al Contexto físico y cultural, una primera aproximación al ámbito donde el edificio se sitúa nos revela las características generales de un lugar claramente diferente a la ubicación del resto de edificios del campus. A continuación se adentra en el origen del nuevo centro universitario desde el planeamiento urbanístico de Alvar Aalto y revela tanto la forma de disponer las construcciones como las propuestas que el maestro había desarrollado con anterioridad a la convocatoria del concurso. Además aquí se destacan aquellos aspectos que propiciaron la elección del solar. Prosigue adentrándose en el programa propuesto por el jurado –entre cuyos miembros se encontraba el propio Aalto- y el análisis de las propuestas presentadas por cada uno de los arquitectos que obtuvieron una mención. Por último, se estudian y definen las obras más relevantes localizadas en el entorno físico del proyecto y que existían con anterioridad, destacando principalmente el trabajo de los Siren (Heikki y Kaija) y Alvar Aalto por los motivos desarrollados en el punto anterior. Prosigue con el Contexto Personal donde se seleccionan de datos biográficos que expliquen, en parte, las circunstancias personales que perfilaron su manera de entender la arquitectura y que consecuentemente influyeron en su camino intelectual hasta llegar a Dipoli. A continuación se indaga en la relación profesional y personal con Raili Paatelainen para establecer en qué medida participaron ambos en la propuesta. Este apartado concluye con el estudio de la etapa docente que profundiza en los temas de proyecto que Pietilä presentaba a los alumnos en sus clases de proyectos. En el proceso de comprensión de la evolución teórica y proyectual de los arquitectos se considera imprescindible la revisión de otros edificios propios que se enmarcan en el Contexto profesional. Éstos forman parte de la etapa de mayor actividad del estudio como son el Pabellón de Finlandia para la Exposición de Bruselas (1956-58), la Iglesia de Kaleva en Tampere (1959-66) y el Pabellón Nórdico para la Bienal de Venecia de 1960. Se completa la visión de estos tres ejemplos previos a Dipoli desde las investigaciones teóricas que realizó de forma paralela y que se difundieron a través de varias exposiciones. Nos centraremos en aquellas tres que fueron más relevantes en la madurez del arquitecto (Morfología y Urbanismo, La Zona y Estudios Modulares) para establecer relaciones entre unos aspectos y otros. En esta sección no se pretende realizar un análisis en profundidad, ni tampoco recoger la mayor parte de la obra de los Pietilä, sino más bien revelar los rasgos más significativos que faciliten el entendimiento de los valores anteriormente mencionados. Por último, Incidencia de Dipoli se refiere a la repercusión del edificio durante su construcción y finalización. Desde esta premisa, recoge el conjunto de críticas publicadas en las revistas de mayor difusión internacional que decidieron mostrar la propuesta además desde el propio interés del proyecto, por tratarse de un arquitecto reconocido internacionalmente gracias a la repercusión que obtuvieron sus proyectos anteriores. Se analiza el contenido de los artículos para establecer diversos encuentros con el capítulo Contextos y con los propios escritos de Pietilä. También se recogen las opiniones de críticos relevantes como Kenneth Frampton, Bruno Zevi o Christian Norberg-Schulz, destacando aquellos aspectos por los que mostraron un interés mayor. También se recoge y valora la opinión de sus homólogos finlandeses y que contradictoriamente se sitúa en el polo opuesto a la del juicio internacional. Se adentra en las situaciones complejas que propició el rechazo del edificio al desvincularse por completo de la corriente racionalista que dominaba el pensamiento crítico finés unido a la búsqueda de nuevas alternativas proyectuales que les distanciase del éxito del maestro Alvar Aalto. Pretende esclarecer tanto la justificación de dichos comentarios negativos como los motivos por los cuales Reima y Raili no obtuvieron encargos durante casi diez años, tras la finalización de Dipoli. Nos referiremos también a la propia opinión de los arquitectos. Para ello, en el apartado Morfología Literal se recoge el texto que Reima Pietilä publicó en el número 9 de la revista Arkkitehti para contrarrestar las numerosas críticas recibidas. Se subraya aquellos aspectos de proyecto que inciden directamente en la percepción y razón de ser de la propuesta. Por último, se manifiesta la valoración crítica de dos personas muy próximas al entorno personal y profesional de los Pietilä: Roger Connah y Malcolm Quantrill. Ambas figuras son las que han adentrado en el trabajo de los arquitectos con mayor profundidad y aportado una visión más completa del contexto arquitectónico de Finlandia en el s.XX. Se han interesado principalmente por el conocimiento morfológico que les ha llevado a la observación de los fenómenos de la naturaleza. Se apunta también la falta de objetividad de sus opiniones originadas en parte por haber colaborado profesionalmente y ser amigo íntimo de la familia respectivamente. El valor de la documentación aportada por ambos reside principalmente en la fiel transmisión de las explicaciones del propio Pietilä. El último capítulo Proyecto y Construcción engloba tanto la descripción exhaustiva del proyecto como el análisis de la obra. Al tiempo que se explica la propuesta, se establecen continuamente relaciones y paralelismos con otras arquitecturas que ayudan a entenderla. Para ello, se establecen tres apartados elementales: “El lugar”, “Programa y geometrías” y “Presencia y materialidad física” y se pretende identificar aquellas herramientas de proyecto en las que confía para la materialización de la obra al tiempo que se profundiza en la evolución de la propuesta. En cuanto a El lugar, se describe de manera pormenorizada el recorrido hasta alcanzar el edificio y cómo la mirada atenta de la naturaleza que lo rodea está continuamente presente en todos los dibujos de la propuesta. Se realiza un estudio tanto de la multiplicidad de accesos como del vacío existente en planta baja que forma parte del espacio público y que atraviesa el edificio diagonalmente. Desde aquí se evaluará los espacios intermedios existentes que matizan los ámbitos donde se desarrolla cada una de las actividades. A continuación se enfoca el estudio de la ventana como elemento relevante en la transición de espacios interiores y exteriores para posteriormente adentrarnos en la importancia de los recorridos en la planta superior y cómo las salas polivalentes se acomodan a estos. Programas y geometrías explica la solución y desarrollo de la propuesta a través de los tanteos de la planta. Detecta simultáneamente aquellos aspectos que aparecen en otros proyectos y que pueden haber influido en el desarrollo de la obra. Una vez que han sido estudiados los dos niveles se introduce la sección para analizar las conexiones entre ambos planos, destacando los tipos de escaleras y accesos que propician la multiplicidad de recorridos y en consecuencia el movimiento de las personas. En el último apartado se identifica la geometría de la estructura a través de la descripción formal de la cubierta y sus apoyos en planta para conocer cómo responde el volumen definitivo a la adecuación de los usos. El carácter del edificio a través del empleo de los materiales y las técnicas de construcción utilizadas se indaga desde la Materialidad física. Este punto de vista esclarece temas de proyecto como la relación multisensorial de Dipoli y el concepto del tiempo relacionado con espacios de carácter dinámico o estático. Una vez se ha realizado un análisis de la obra construida a través de sus recorridos, se plantea un último regreso al exterior para observar la presencia del edificio a través de su tamaño, color y texturas. Este apartado nos mostrará la mirada atenta a la escala del proyecto como vector de dirección que pretende encontrar la inserción adecuada del edificio en el lugar, cerrando el proceso de proyecto. El motivo de desarrollar esta tesis en torno a Dipoli se apoya en su consideración como paradigma de una arquitectura que confía en la observación sensible del programa, uso, las escalas de los espacios, circulaciones y su relación y anclaje con el lugar como argumentos fundamentales de proyecto, cuya realidad concreta consigue situar la propuesta en el marco histórico de la arquitectura nórdica e internacional. Además la distancia histórica desde mundo actual respecto a la década de los años 60 del s.XX nos permite entender el contexto cultural donde se inserta Dipoli que continúa nuestra historia reciente de la arquitectura y concibe la obra construida como una extensión de nuestro mundo contemporáneo. Por ello se valora el proyecto desde la mirada hacia atrás que analiza las diferencias entre la realidad construida y las intenciones de partida. Esta revisión dotada de una distancia crítica nos permite adentrarnos en la investigación de manera objetiva. Igualmente presenta una distancia histórica (referida al tiempo transcurrido desde su construcción) y socio-cultural que favorece la atenuación de prejuicios y aspectos morales que puedan desviar una mirada analítica y se alejen de una valoración imparcial. Dipoli, enmarcada en dicho periodo, mantiene la capacidad crítica para ser analizada. ABSTRACT The dissertation defends Dipoli ( 1961-1966 ) as one of the most significant examples of the Reima ( 1923-1993 ) Raili Pietilä (1926 -), who joined both personally and professionally the same year of the project´s competition (1961). Due to the difficulty of the commission by the size and flexibility of the required areas, there was not first prize awarded because none of the submitted proposals met all the requirements. The jury awarded Dipoli with second prize together with a competing scheme by Osmo Lappo. The board subsequently asked for a further development of both proposals and finally selected the one by Pietilä. The completed project allows a wide range of social activities such as meetings, night entertainment, performances, film screenings, dinners and dance to take place while the facility can also serve as a dining hall during winter months and conference center in the summer when necessary. In addition, the building was intended to house the Helsinki University of Technology (now Aalto University) Student Union. The University, at the time being designed by Alvar Aalto following his successful entry to the master plan competition in 1949, was located a few kilometers from the capital on the new campus in Otaniemi. The most characteristic element of the project is its roof which can be described as a continuous form achieved an in-situ concrete cavity structure that can modulate two different geometric languages and generate a singular space under it. The building is, in general terms, an unique shell space with many functional possibilities. Its geometry allows the program to split its functions into smaller sizes without losing the identity or formal unity of the general object. The way in which the spaces are illuminated is solved in two different ways. First, while the Cartesian-line volume presents a series of longitudinal openings into which natural light penetrates, the free-form volume shows a set of skylights in apparently random positions that vary in size and that introduce natural light through the roof in a more controlled manner. In addition the perimeter openings are present that relate directly to the nature that surrounds the building. The adaptable thickness of the roof provides a set of solutions that resolve the three main issues of the project: the adequacy of the functions in the interior areas, the complex capability for user flows and circulation and the manner in which the building is inserted in its context. The perception of the roof´ horizontal plane offers multiple interpretations, from its primary use as a primitive cover whose distance from the ground compresses the void and creates a light tension, to the new relationships with the landscape where by the roof becomes a façade cladding and rests directly on the ground to create a physical boundary between interior and exterior. The main scope of this research is to better understand the particular trace of Dipoli from a rigorous architectural view to deep into the knowledge of the building and, at the same time, to explain the space through a series of project design tools that have been used. For this reason, an accurate documentation has arisen from collecting, selecting and redrawing the existing information from the sketching stage to the built object. A through reanalysis of the Otaniemi Student Center therefore provides not only a more complete understanding of the work of the architects, but also leads to a better comprehension of the history of Finnish architecture, which is related to other cultural relationships and which shares certain architectural values which a more comprehensive understanding of general architectural history. This research starts from the working hypothesis that the final shape of the building and its relationship to its place created a type of architecture that relies on a sensitive observation of the program, the use of varying scales of space, the movement and flow of people and finally the coexistence with the natural context. In this sense, the work is developed based on those aspects that are also reflected in the influence of others architects by understanding both their own and other architects´ work. In order to obtain a personal reading of the project facts that allowed the architects construct Dipoli (understanding the facts as a set of tools and project mechanisms that are able to generate a particular volumetric composition and dynamic spaces that at the same time provide an expressive exterior), the research hinges on two main sections, "Contexts" and "Design and Construction", that study the project from all perspectives. This two parts address the description of temporal , physical , cultural , personal and professional framework, analysis and synthesis of the proposal and finally, the national and international influences on the project. Contexts seek to place the work and to facilitate the understanding of all aspects and conditions that led to the creation of Dipoli. This chapter is subdivided into five sections: Historical Context, Cultural and Physical, Personal, Professional and Dipoli Influences. Historical Context focuses on a detailed description of a set of precedents that influenced the architect when making decisions during design process. The objective is to define the conditions that could directly or indirectly shape the work. This chapter begins by highlighting issues of common interest to the rest its Finnish counterparts. The text is mainly focused on the 1950s as a prelude to Dipoli´s conception. It will also address the process of Finnish architecture from the late nineteenth century as linked to the national identity crisis that the great master Alvar Aalto overcame with both his works and personality, being a great drain on the rest of his colleagues. This aspect caused a reaction against Aalto and his projects. For this reason, at the time that Dipoli came into being a number of professionals who strongly defended the traces of Cartesian Rationalism, including Juhani Pallasmaa and Aulis Blomstedt emerged and brought a new intellectual perspective to the Finnish architecture scene. It is thus inevitable that the presence of Alvar Aalto will be apparent throughout the dissertation to allow a better understanding of the organizational and human character of their work from the Pietiläs´ perspective. Later, this chapter identifies those interests that dominated the international architectural framework that could have influenced Dipoli. The project will be placed in relation to various contemporary architectural works that were created using a different approach to that outlined by the Modern Movement. This is present in the case of Team 10 group and with specific examples of German architects including Hans Scharoun and Hugo Häring, as well as some commonalities with Soviet Constructivism. These relationships with other architecture qualify its singular character and even extend how this proposal amplifies those shared aspects. Physical and Cultural Context involves the unique site where the building is located which includes different features from the location of other buildings on the campus. IT then progresses into the origin of the new campus from the urban planning of Alvar Aalto and reveals both the setting and proposed constructions that Aalto had developed. This section also highlights the aspects that led to the choice of the site. I go deep into the program proposed by the jury (of whom Aalto was a member) and the analysis of the alternative proposals that received a special commendation. Finally, I study and define the most relevant works located near Dipoli, emphasizing primarily the work of the Sirens (Heikki and Kaija) and Alvar Aalto for the reasons developed in the previous section. I then proceed with the Personal Context, where a series of biographical data are selected to begin to explain the personal circumstances that outlined the Pietilas´ architectural understanding and consequently could have influenced their intellectual approach to design Dipoli. Then the text explores their professional and personal relationship to establish what extent they participated in the proposal. This section concludes with the study of the Reima Pietilä´s teaching period at Oulu that explores the issues he presented to his students there. In the process of understanding the Pietiläs´ theoretical and design evolution, it must be considered essential to study other buildings that are part of their professional context. These projects belong to the most active stage of their office and include the Finnish Pavilion for the World´s Fair in Brussels (1956-1958), Kaleva Church in Tampere (1959-1966) and the Nordic Pavilion at the 1960 Venice Biennale. We will complete the view of Dipoli from previous theoretical investigations performed in parallel that were spread through several exhibitions. We will focus on the three that were most relevant to the evolution of the architect (Morphology and Urbanism, the Zone, and Stick Studies) to establish a series of useful relationships. This section is not intended to be an in-depth analysis nor to collect most of the work of the Pietiläs´; but rather to reveal the most significant features that facilitate an understanding of the above values. Finally, Dipoli´s Impact refers to the influence of the building from many points of view during its construction and after its completion. It collects the reviews published in the world's most relevant magazines which had decided to show the alternate proposals, generally conceived of by internationally-renowned architects. I analyze the content of the articles in order to establish a series of parallels with the chapter Contexts and own writings Pietilä to clarify if main design directions were clear at that time. The views of relevant critics, including Kenneth Frampton, Bruno Zevi and Christian Norberg -Schulz, are also collected here. This episode also collects and assesses the views of these critics´ Finnish counterparts that generally stood at the opposite side of the international debate. It delves into the complex situation that led to the rejection of the building by the rationalists that dominated the Finnish critical thinking while searching for new alternatives to distance themselves from the Alvar Aalto´s success. It aims to clarify both the justification for these negative comments and the reasons why Reima and Raili not obtain a single commission for nearly ten years after the completion of Dipoli. From the critics we will approach the opinion of Reima Pietilä himself. To do this, in the Literal Morphology section we will see how the architect tried to defend his position. Those design tool that directly affected the perception of the proposal are provided through the figures of Roger Connah and Malcolm Quantrill. Finally, a critical –personal and professional- review of these two very close figures will take place. Despite knowing that both delved into the work of architects with greater depth and provided a complete view of the Finnish architectural context in 20th century, they have focused mainly morphological knowledge which has led to the observation of natural phenomena. It also notes the lack of objectivity in their views caused in part by, in the case of Connah, collaborating professionally and in that of Quantrill being a close friend of the Pietilä family. The value of the documentation provided by both resides mainly in the faithful transmission of the Pietiläs´ own explanations. The final chapter covers both Design and Construction and provides a comprehensive project description in order tofaithfully analyse the work. As the proposal is being explained, relationships of its built form are continuously linked to other architectural projects to gain a better understanding of Dipoli itself. To do this we have set three basic sections: "The Place", "Geometries & Function" and "Presence and Materiality. Construction process" that intended to identify those project tools for the realization of the work while deepens the proposal´s evolution. The Place describes how to approach and reach the building in detail and how the view out towards the surrounding natural setting is continuously shown in the proposal´s drawings. We will study both the multiplicity of entrances as well as the corridor downstairs as part of the public space that diagonally goes through the building. Then, the existing voids in the concrete cave for public activities will be evaluated. Lastly, the study will focus on the openings as a significant element in the transition from interior and exterior areas to describe the importance of the circulation on the second floor and how function is able to accommodate through the areas of void. Geometries & Function explains the final solution and the development of the proposal through the floor plan. Simultaneously it detects those aspects that appear in other projects and that may have influenced the development of the work. Once we have analyzed both levels –ground and second floor- section drawings come into the topic to study the connections between the two levels and highlighting the types of hierarchy for the multiple paths to organize the flows of people inside the building. In the last section the structural geometry is identified through the description of the form and how it responds to the final volumetrical settings. The character of the building through the use of materials and construction techniques inquires from Presence and Materiality. This point of view clarifies multisensory project issues as Dipoli relationship to the dynamic or static character or different spaces inside the building. Once the analysis has been made we will step back to a final return to the building´s exterior to analyze the presence of the building through its scale, colour and textures. This section emphasizes the project´s scale and orientation to find the proper insertion of the building in place. In short, this dissertation has been done by the idea that Pietiläs´special abilities were allowed from a sensitive observation of the program, the creation of a variety of special scales, dynamic circulation and the relating relationship with the project´s location as fundamental design tools. From this aspect, Dipoli could be more usefully framed in the historical context of Nordic and international architecture. The dissertation allows us to better understand the cultural context of the 1960s, in which Dipoli was established since it continues our recent architectural history. The final built form is conceived as an extension of our contemporary world. Therefore the project is assessed through the comparison of the architects´ intentions and the final completed project.

The educational learning lifecycle and the cloud computing

Currently, student dropout rates are a matter of concern among universities. Many research studies, aimed at discovering the causes, have been carried out. However, few solutions, that could serve all students and related problems, have been proposed so far. One such problem is caused by the lack of the "knowledge chain educational links" that occurs when students move onto higher studies without mastering their basic studies. Most regulated studies imparted at universities are designed so that some basic subjects serve as support for other, more complicated, subjects, thus forming a complicated knowledge network. When a link in this chain fails, student frustration occurs as it prevents him from fully understanding the following educational links. In this proposal we try to mitigate these disasters that stem, for the most part, the student?s frustration beyond his college stay. On one hand, we make a dissertation on the student?s learning process, which we divide into a series of phases that amount to what we call the "learning lifecycle." Also, we analyze at what stage the action by the stakeholders involved in this scenario: teachers and students; is most important. On the other hand, we consider that Information and Communication Technologies ICT, such as Cloud Computing, can help develop new ways, allowing for the teaching of higher education, while easing and facilitating the student?s learning process. But, methods and processes need to be defined as to direct the use of such technologies; in the teaching process in general, and within higher education in particular; in order to achieve optimum results. Our methodology integrates, as another actor, the ICT into the "Learning Lifecycle". We stimulate students to stop being merely spectators of their own education, and encourage them to take an active part in their training process. To do this, we offer a set of useful tools to determine not only academic failure causes, (for self assessment), but also to remedy these failures (with corrective actions); "discovered the causes it is easier to determine solutions?. We believe this study will be useful for both students and teachers. Students learn from their own experience and improve their learning process, while obtaining all of the "knowledge chain educational links? required in their studies. We stand by the motto "Studying to learn instead of studying to pass". Teachers will also be benefited by detecting where and how to strengthen their teaching proposals. All of this will also result in decreasing dropout rates.

Testing of Android testing tools: development of a benchmark for the evaluation

With the ever growing trend of smart phones and tablets, Android is becoming more and more popular everyday. With more than one billion active users i to date, Android is the leading technology in smart phone arena. In addition to that, Android also runs on Android TV, Android smart watches and cars. Therefore, in recent years, Android applications have become one of the major development sectors in software industry. As of mid 2013, the number of published applications on Google Play had exceeded one million and the cumulative number of downloads was more than 50 billionii. A 2013 survey also revealed that 71% of the mobile application developers work on developing Android applicationsiii. Considering this size of Android applications, it is quite evident that people rely on these applications on a daily basis for the completion of simple tasks like keeping track of weather to rather complex tasks like managing one’s bank accounts. Hence, like every other kind of code, Android code also needs to be verified in order to work properly and achieve a certain confidence level. Because of the gigantic size of the number of applications, it becomes really hard to manually test Android applications specially when it has to be verified for various versions of the OS and also, various device configurations such as different screen sizes and different hardware availability. Hence, recently there has been a lot of work on developing different testing methods for Android applications in Computer Science fraternity. The model of Android attracts researchers because of its open source nature. It makes the whole research model more streamlined when the code for both, application and the platform are readily available to analyze. And hence, there has been a great deal of research in testing and static analysis of Android applications. A great deal of this research has been focused on the input test generation for Android applications. Hence, there are a several testing tools available now, which focus on automatic generation of test cases for Android applications. These tools differ with one another on the basis of their strategies and heuristics used for this generation of test cases. But there is still very little work done on the comparison of these testing tools and the strategies they use. Recently, some research work has been carried outiv in this regard that compared the performance of various available tools with respect to their respective code coverage, fault detection, ability to work on multiple platforms and their ease of use. It was done, by running these tools on a total of 60 real world Android applications. The results of this research showed that although effective, these strategies being used by the tools, also face limitations and hence, have room for improvement. The purpose of this thesis is to extend this research into a more specific and attribute-­‐ oriented way. Attributes refer to the tasks that can be completed using the Android platform. It can be anything ranging from a basic system call for receiving an SMS to more complex tasks like sending the user to another application from the current one. The idea is to develop a benchmark for Android testing tools, which is based on the performance related to these attributes. This will allow the comparison of these tools with respect to these attributes. For example, if there is an application that plays some audio file, will the testing tool be able to generate a test input that will warrant the execution of this audio file? Using multiple applications using different attributes, it can be visualized that which testing tool is more useful for which kinds of attributes. In this thesis, it was decided that 9 attributes covering the basic nature of tasks, will be targeted for the assessment of three testing tools. Later this can be done for much more attributes to compare even more testing tools. The aim of this work is to show that this approach is effective and can be used on a much larger scale. One of the flagship features of this work, which also differentiates it with the previous work, is that the applications used, are all specially made for this research. The reason for doing that is to analyze just that specific attribute in isolation, which the application is focused on, and not allow the tool to get bottlenecked by something trivial, which is not the main attribute under testing. This means 9 applications, each focused on one specific attribute. The main contributions of this thesis are: A summary of the three existing testing tools and their respective techniques for automatic test input generation of Android Applications. • A detailed study of the usage of these testing tools using the 9 applications specially designed and developed for this study. • The analysis of the obtained results of the study carried out. And a comparison of the performance of the selected tools.