Leakage and temperature aware server control for improving energy efficiency in data centers

Reducing the energy consumption for computation and cooling in servers is a major challenge considering the data center energy costs today. To ensure energy-efficient operation of servers in data centers, the relationship among computa- tional power, temperature, leakage, and cooling power needs to be analyzed. By means of an innovative setup that enables monitoring and controlling the computing and cooling power consumption separately on a commercial enterprise server, this paper studies temperature-leakage-energy tradeoffs, obtaining an empirical model for the leakage component. Using this model, we design a controller that continuously seeks and settles at the optimal fan speed to minimize the energy consumption for a given workload. We run a customized dynamic load-synthesis tool to stress the system. Our proposed cooling controller achieves up to 9% energy savings and 30W reduction in peak power in comparison to the default cooling control scheme.

Wettability, polarity and water absorption of Quercus ilex leaves: effect of leaf side and age

Plant trichomes play important protective functions and may have a major influence on leaf surface wettability. With the aim of gaining insight into trichome structure, composition and function in relation to water-plant surface interactions, we analyzed the adaxial and abaxial leaf surface of Quercus ilex L. (holm oak) as model. By measuring the leaf water potential 24 h after the deposition of water drops on to abaxial and adaxial surfaces, evidence for water penetration through the upper leaf side was gained in young and mature leaves. The structure and chemical composition of the abaxial (always present) and adaxial (occurring only in young leaves) trichomes were analyzed by various microscopic and analytical procedures. The adaxial surfaces were wettable and had a high degree of water drop adhesion in contrast to the highly unwettable and water repellent abaxial holm oak leaf sides. The surface free energy, polarity and solubility parameter decreased with leaf age, with generally higher values determined for the abaxial sides. All holm oak leaf trichomes were covered with a cuticle. The abaxial trichomes were composed of 8% soluble waxes, 49% cutin, and 43% polysaccharides. For the adaxial side, it is concluded that trichomes and the scars after trichome shedding contribute to water uptake, while the abaxial leaf side is highly hydrophobic due to its high degree of pubescence and different trichome structure, composition and density. Results are interpreted in terms of water-plant surface interactions, plant surface physical-chemistry, and plant ecophysiology.

Optimizing PV use through active demand side management

With recent technological developments within the field of power conditioning and the progressive decrease of incentives for PV electricity in grid-connected markets, new operation modes for PV systems should be explored beyond the traditional maximization of PV electri city feed-in. An example can be found in the domestic sector, where the use of modern PV hybrid systems combin ed with efficient electrical appliances and demand side management strategies can significantly enhance the PV value for the user. This paper presents an active demand side management system able to displace the consumer’s load curve in response to local (PV hybrid system, user) and external conditions (external grid). In this way, th e consumer becomes an “active consumer” that can also cooperate with others and the grid, increasing even more the PV value for the electrical system.

A swarm intelligence approach based on coupled oscillators: an application in demand side management with photovoltaic distributed generation

Esta Tesis aborda los problemas de eficiencia de las redes eléctrica desde el punto de vista del consumo. En particular, dicha eficiencia es mejorada mediante el suavizado de la curva de consumo agregado. Este objetivo de suavizado de consumo implica dos grandes mejoras en el uso de las redes eléctricas: i) a corto plazo, un mejor uso de la infraestructura existente y ii) a largo plazo, la reducción de la infraestructura necesaria para suplir las mismas necesidades energéticas. Además, esta Tesis se enfrenta a un nuevo paradigma energético, donde la presencia de generación distribuida está muy extendida en las redes eléctricas, en particular, la generación fotovoltaica (FV). Este tipo de fuente energética afecta al funcionamiento de la red, incrementando su variabilidad. Esto implica que altas tasas de penetración de electricidad de origen fotovoltaico es perjudicial para la estabilidad de la red eléctrica. Esta Tesis trata de suavizar la curva de consumo agregado considerando esta fuente energética. Por lo tanto, no sólo se mejora la eficiencia de la red eléctrica, sino que también puede ser aumentada la penetración de electricidad de origen fotovoltaico en la red. Esta propuesta conlleva grandes beneficios en los campos económicos, social y ambiental. Las acciones que influyen en el modo en que los consumidores hacen uso de la electricidad con el objetivo producir un ahorro energético o un aumento de eficiencia son llamadas Gestión de la Demanda Eléctrica (GDE). Esta Tesis propone dos algoritmos de GDE diferentes para cumplir con el objetivo de suavizado de la curva de consumo agregado. La diferencia entre ambos algoritmos de GDE reside en el marco en el cual estos tienen lugar: el marco local y el marco de red. Dependiendo de este marco de GDE, el objetivo energético y la forma en la que se alcanza este objetivo son diferentes. En el marco local, el algoritmo de GDE sólo usa información local. Este no tiene en cuenta a otros consumidores o a la curva de consumo agregado de la red eléctrica. Aunque esta afirmación pueda diferir de la definición general de GDE, esta vuelve a tomar sentido en instalaciones locales equipadas con Recursos Energéticos Distribuidos (REDs). En este caso, la GDE está enfocada en la maximización del uso de la energía local, reduciéndose la dependencia con la red. El algoritmo de GDE propuesto mejora significativamente el auto-consumo del generador FV local. Experimentos simulados y reales muestran que el auto-consumo es una importante estrategia de gestión energética, reduciendo el transporte de electricidad y alentando al usuario a controlar su comportamiento energético. Sin embargo, a pesar de todas las ventajas del aumento de auto-consumo, éstas no contribuyen al suavizado del consumo agregado. Se han estudiado los efectos de las instalaciones locales en la red eléctrica cuando el algoritmo de GDE está enfocado en el aumento del auto-consumo. Este enfoque puede tener efectos no deseados, incrementando la variabilidad en el consumo agregado en vez de reducirlo. Este efecto se produce porque el algoritmo de GDE sólo considera variables locales en el marco local. Los resultados sugieren que se requiere una coordinación entre las instalaciones. A través de esta coordinación, el consumo debe ser modificado teniendo en cuenta otros elementos de la red y buscando el suavizado del consumo agregado. En el marco de la red, el algoritmo de GDE tiene en cuenta tanto información local como de la red eléctrica. En esta Tesis se ha desarrollado un algoritmo autoorganizado para controlar el consumo de la red eléctrica de manera distribuida. El objetivo de este algoritmo es el suavizado del consumo agregado, como en las implementaciones clásicas de GDE. El enfoque distribuido significa que la GDE se realiza desde el lado de los consumidores sin seguir órdenes directas emitidas por una entidad central. Por lo tanto, esta Tesis propone una estructura de gestión paralela en lugar de una jerárquica como en las redes eléctricas clásicas. Esto implica que se requiere un mecanismo de coordinación entre instalaciones. Esta Tesis pretende minimizar la cantidad de información necesaria para esta coordinación. Para lograr este objetivo, se han utilizado dos técnicas de coordinación colectiva: osciladores acoplados e inteligencia de enjambre. La combinación de estas técnicas para llevar a cabo la coordinación de un sistema con las características de la red eléctrica es en sí mismo un enfoque novedoso. Por lo tanto, este objetivo de coordinación no es sólo una contribución en el campo de la gestión energética, sino también en el campo de los sistemas colectivos. Los resultados muestran que el algoritmo de GDE propuesto reduce la diferencia entre máximos y mínimos de la red eléctrica en proporción a la cantidad de energía controlada por el algoritmo. Por lo tanto, conforme mayor es la cantidad de energía controlada por el algoritmo, mayor es la mejora de eficiencia en la red eléctrica. Además de las ventajas resultantes del suavizado del consumo agregado, otras ventajas surgen de la solución distribuida seguida en esta Tesis. Estas ventajas se resumen en las siguientes características del algoritmo de GDE propuesto: • Robustez: en un sistema centralizado, un fallo o rotura del nodo central provoca un mal funcionamiento de todo el sistema. La gestión de una red desde un punto de vista distribuido implica que no existe un nodo de control central. Un fallo en cualquier instalación no afecta el funcionamiento global de la red. • Privacidad de datos: el uso de una topología distribuida causa de que no hay un nodo central con información sensible de todos los consumidores. Esta Tesis va más allá y el algoritmo propuesto de GDE no utiliza información específica acerca de los comportamientos de los consumidores, siendo la coordinación entre las instalaciones completamente anónimos. • Escalabilidad: el algoritmo propuesto de GDE opera con cualquier número de instalaciones. Esto implica que se permite la incorporación de nuevas instalaciones sin afectar a su funcionamiento. • Bajo coste: el algoritmo de GDE propuesto se adapta a las redes actuales sin requisitos topológicos. Además, todas las instalaciones calculan su propia gestión con un bajo requerimiento computacional. Por lo tanto, no se requiere un nodo central con un alto poder de cómputo. • Rápido despliegue: las características de escalabilidad y bajo coste de los algoritmos de GDE propuestos permiten una implementación rápida. No se requiere una planificación compleja para el despliegue de este sistema. ABSTRACT This Thesis addresses the efficiency problems of the electrical grids from the consumption point of view. In particular, such efficiency is improved by means of the aggregated consumption smoothing. This objective of consumption smoothing entails two major improvements in the use of electrical grids: i) in the short term, a better use of the existing infrastructure and ii) in long term, the reduction of the required infrastructure to supply the same energy needs. In addition, this Thesis faces a new energy paradigm, where the presence of distributed generation is widespread over the electrical grids, in particular, the Photovoltaic (PV) generation. This kind of energy source affects to the operation of the grid by increasing its variability. This implies that a high penetration rate of photovoltaic electricity is pernicious for the electrical grid stability. This Thesis seeks to smooth the aggregated consumption considering this energy source. Therefore, not only the efficiency of the electrical grid is improved, but also the penetration of photovoltaic electricity into the grid can be increased. This proposal brings great benefits in the economic, social and environmental fields. The actions that influence the way that consumers use electricity in order to achieve energy savings or higher efficiency in energy use are called Demand-Side Management (DSM). This Thesis proposes two different DSM algorithms to meet the aggregated consumption smoothing objective. The difference between both DSM algorithms lie in the framework in which they take place: the local framework and the grid framework. Depending on the DSM framework, the energy goal and the procedure to reach this goal are different. In the local framework, the DSM algorithm only uses local information. It does not take into account other consumers or the aggregated consumption of the electrical grid. Although this statement may differ from the general definition of DSM, it makes sense in local facilities equipped with Distributed Energy Resources (DERs). In this case, the DSM is focused on the maximization of the local energy use, reducing the grid dependence. The proposed DSM algorithm significantly improves the self-consumption of the local PV generator. Simulated and real experiments show that self-consumption serves as an important energy management strategy, reducing the electricity transport and encouraging the user to control his energy behavior. However, despite all the advantages of the self-consumption increase, they do not contribute to the smooth of the aggregated consumption. The effects of the local facilities on the electrical grid are studied when the DSM algorithm is focused on self-consumption maximization. This approach may have undesirable effects, increasing the variability in the aggregated consumption instead of reducing it. This effect occurs because the algorithm only considers local variables in the local framework. The results suggest that coordination between these facilities is required. Through this coordination, the consumption should be modified by taking into account other elements of the grid and seeking for an aggregated consumption smoothing. In the grid framework, the DSM algorithm takes into account both local and grid information. This Thesis develops a self-organized algorithm to manage the consumption of an electrical grid in a distributed way. The goal of this algorithm is the aggregated consumption smoothing, as the classical DSM implementations. The distributed approach means that the DSM is performed from the consumers side without following direct commands issued by a central entity. Therefore, this Thesis proposes a parallel management structure rather than a hierarchical one as in the classical electrical grids. This implies that a coordination mechanism between facilities is required. This Thesis seeks for minimizing the amount of information necessary for this coordination. To achieve this objective, two collective coordination techniques have been used: coupled oscillators and swarm intelligence. The combination of these techniques to perform the coordination of a system with the characteristics of the electric grid is itself a novel approach. Therefore, this coordination objective is not only a contribution in the energy management field, but in the collective systems too. Results show that the proposed DSM algorithm reduces the difference between the maximums and minimums of the electrical grid proportionally to the amount of energy controlled by the system. Thus, the greater the amount of energy controlled by the algorithm, the greater the improvement of the efficiency of the electrical grid. In addition to the advantages resulting from the smoothing of the aggregated consumption, other advantages arise from the distributed approach followed in this Thesis. These advantages are summarized in the following features of the proposed DSM algorithm: • Robustness: in a centralized system, a failure or breakage of the central node causes a malfunction of the whole system. The management of a grid from a distributed point of view implies that there is not a central control node. A failure in any facility does not affect the overall operation of the grid. • Data privacy: the use of a distributed topology causes that there is not a central node with sensitive information of all consumers. This Thesis goes a step further and the proposed DSM algorithm does not use specific information about the consumer behaviors, being the coordination between facilities completely anonymous. • Scalability: the proposed DSM algorithm operates with any number of facilities. This implies that it allows the incorporation of new facilities without affecting its operation. • Low cost: the proposed DSM algorithm adapts to the current grids without any topological requirements. In addition, every facility calculates its own management with low computational requirements. Thus, a central computational node with a high computational power is not required. • Quick deployment: the scalability and low cost features of the proposed DSM algorithms allow a quick deployment. A complex schedule of the deployment of this system is not required.

Server power modeling for run-time energy optimization of cloud computing facilities

As advanced Cloud services are becoming mainstream, the contribution of data centers in the overall power consumption of modern cities is growing dramatically. The average consumption of a single data center is equivalent to the energy consumption of 25.000 households. Modeling the power consumption for these infrastructures is crucial to anticipate the effects of aggressive optimization policies, but accurate and fast power modeling is a complex challenge for high-end servers not yet satisfied by analytical approaches. This work proposes an automatic method, based on Multi-Objective Particle Swarm Optimization, for the identification of power models of enterprise servers in Cloud data centers. Our approach, as opposed to previous procedures, does not only consider the workload consolidation for deriving the power model, but also incorporates other non traditional factors like the static power consumption and its dependence with temperature. Our experimental results shows that we reach slightly better models than classical approaches, but simul- taneously simplifying the power model structure and thus the numbers of sensors needed, which is very promising for a short-term energy prediction. This work, validated with real Cloud applications, broadens the possibilities to derive efficient energy saving techniques for Cloud facilities.

Leakage-aware cooling management for improving server energy efficiency

The computational and cooling power demands of enterprise servers are increasing at an unsustainable rate. Understanding the relationship between computational power, temperature, leakage, and cooling power is crucial to enable energy-efficient operation at the server and data center levels. This paper develops empirical models to estimate the contributions of static and dynamic power consumption in enterprise servers for a wide range of workloads, and analyzes the interactions between temperature, leakage, and cooling power for various workload allocation policies. We propose a cooling management policy that minimizes the server energy consumption by setting the optimum fan speed during runtime. Our experimental results on a presently shipping enterprise server demonstrate that including leakage awareness in workload and cooling management provides additional energy savings without any impact on performance.

Perceptual distortion modeling for side-by-side 3D video delivery

A frame-level distortion model based on perceptual features of the human visual system is proposed to improve the performance of unequal error protection strategies and provide better quality of experience to users in Side-by-Side 3D video delivery systems.

Transmitter-side antennas correlation in SVD-assisted MIMO systems

MIMO techniques allow increasing wireless channel performance by decreasing the BER and increasing the channel throughput and in consequence are included in current mobile communication standards. MIMO techniques are based on benefiting the existence of multipath in wireless communications and the application of appropriate signal processing techniques. The singular value decomposition (SVD) is a popular signal processing technique which, based on the perfect channel state information (PCSI) knowledge at both the transmitter and receiver sides, removes inter-antenna interferences and improves channel performance. Nevertheless, the proximity of the multiple antennas at each front-end produces the so called antennas correlation effect due to the similarity of the various physical paths. In consequence, antennas correlation drops the MIMO channel performance. This investigation focuses on the analysis of a MIMO channel under transmitter-side antennas correlation conditions. First, antennas correlation is analyzed and characterized by the correlation coefficients. The analysis describes the relation between antennas correlation and the appearance of predominant layers which significantly affect the channel performance. Then, based on the SVD, pre- and post-processing is applied to remove inter-antenna interferences. Finally, bit- and power allocation strategies are applied to reach the best performance. The resulting BER reveals that antennas correlation effect diminishes the channel performance and that not necessarily all MIMO layers must be activated to obtain the best performance.

Regulación del movimiento y anticipación en el resto del primer servicio en tenis

Aunque se han logrado importantes avances en estudios de laboratorio con diseños experimentales poco representativos (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), a día de hoy, todavía se desconoce a cabalidad cómo los jugadores de tenis de diferente nivel de pericia calibran o ajustan sus movimientos a las demandas espacio-temporales presentes en la tarea de resto de un primer servicio. ! Escasos trabajos se han llevado a cabo in situ y a la mayoría se les puede cuestionar algún aspecto de la metodología empleada. Así pues, en varios estudios la frecuencia de grabación ha sido limitada (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), o la velocidad del saque ha sido visiblemente inferior a la habitual (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). También, en algunos estudios los participantes experimentados no han sido jugadores de nivel internacional (e.g., Avilés, Ruiz, Sanz y Navia, 2014), y el tamaño muestral ha sido muy pequeño (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). ! Además, en los diferentes trabajos se han utilizado una diversidad de métodos e instrumentos de medida y los criterios de codificación del inicio de los movimientos y de las respuestas han diferido; como consecuencia el lapso visomotor de respuesta (LVMr) ha sido muy dispar variando considerablemente de 198 a 410 ms. Considerando los inconvenientes señalados anteriormente, el presente estudio tuvo como objetivo determinar un modelo técnico de regulación temporal de los movimientos y de la respuesta del restador, tomando en cuenta el flujo continuo de información proporcionado por el sacador. Para ello, se realizó un análisis cronométrico de los restos de doce jugadores de diferente nivel deportivo (seis internacionales y seis nacionales) que respondieron de forma natural enviando sus devoluciones hacia las dianas. Se grabaron las acciones de los restadores y sacadores con una cámara Casio Exilim Pro Ex-F1 de alta velocidad (300 Hz) y luego se realizó un análisis imagen por imagen cada 3.33 ms. Una vez obtenidos los datos de los vídeos se realizaron análisis con las pruebas de ANOVA de un factor, ANCOVA con la velocidad del saque como covariable, U de Mann-Whitney y Chi-cuadrado de Pearson. En cuanto a la regulación del movimiento hasta el momento del despegue, los jugadores internacionales iniciaron sus acciones antes que los jugadores nacionales lo que podría indicar una mejor preparación al ejecutar los movimientos como reflejo del nivel de pericia. Los jugadores internacionales iniciaron la elevación del pie posterior a -293 ms y los jugadores nacionales a -202 ms. Todas estas acciones se fueron enlazando unas con otras y fue en el momento del impacto del sacador donde los restadores demostraron una remarcable coordinación perceptivo-motriz. Por consiguiente, los jugadores internacionales despegaron e iniciaron el vuelo a tan solo -6.5 ms del impacto y los jugadores nacionales lo hicieron más tarde a +19.5 ms. A lo largo de la secuencia temporal, todo parece indicar que las informaciones que utilizan los restadores interactúan entre sí; información más temprana y menos fiable para anticipar o moverse antes e información más tardía y más fiable para regular la temporalización de las acciones. Los restadores de nivel internacional y nacional anticiparon a nivel espacial en un bajo porcentaje (7.7% vs. 13.6%) y en tiempos similares (-127 vs. -118 ms) sugiriendo que la utilización de variables ópticas tempranas y menos fiables solo se produce en contadas ocasiones. Por otra parte, estos datos se relacionan con una gran precisión en la respuesta ya que tanto los jugadores internacionales como los nacionales demostraron un alto porcentaje de acierto al responder (95.4% vs. 96.7%). Se había señalado que los jugadores internacionales y nacionales se diferenciarían en el tiempo de caída (i.e., aterrizaje) del primer pie del salto preparatorio, sin embargo ese efecto no fue encontrado (128 vs. 135 ms). Tampoco se hallaron diferencias en el porcentaje de caída con el pie contrario a la dirección de la pelota (58% vs. 62%). Donde sí ambos grupos se diferenciaron fue en el tiempo de caída del segundo pie (147 vs. 168 ms). Esta diferencia de 21 ms fue crucial y fue una prueba de la mayor rapidez de los jugadores internacionales; sugiriendo que ésta acción se podría relacionar con el momento del inicio de la respuesta. Aunque los jugadores internacionales hayan demostrado ser más rápidos en relación con sus capacidades funcionales, ambos grupos no se diferenciaron en todas las variables relacionadas con el LVMr. Ellos no utilizaron esos valiosos milisegundos ganados en el instante de la caída del segundo pie para responder más pronto, ya que el LVMr del miembro superior fue el mismo para ambos grupos (179 vs. 174 ms). Es como si hubiesen tenido todo el tiempo del mundo para seguir ajustando sus acciones hasta el propio golpeo. Además, estos tiempos largos sugieren que en la gran mayoría de los restos la información clave que determinó la respuesta fue detectada (extraída) en momentos cercanos al golpeo del sacador y en la primera parte del vuelo de la pelota. Asimismo, se constató que en general el LVMr se ve influenciado por el tipo de información utilizada. De esta manera, cuando se tomaron en cuenta los ensayos en los que hubo anticipación espacial reflejados en el LVMr del cuerpo entero los tiempos disminuyeron (152 vs. 136 ms). Por otra parte, existieron ocasiones (13%) en los que tanto los jugadores internacionales como los nacionales respondieron tarde recibiendo saques directos (208 vs. 195 ms). Es muy posible que en estos casos los jugadores hayan tenido problemas para detectar la información respondiendo fuera de los márgenes temporales de acción lo que mermó su rendimiento. Lo mismo pudo haber ocurrido cuando ambos grupos de jugadores corrigieron el movimiento del miembro superior tras el impacto (17% vs. 10%) lo que aumentó el tiempo en responder al redirigir la respuesta hacia el lado correcto (208 vs. 205 ms). Además, los jugadores internacionales obtuvieron tiempos de movimiento menores que el de los jugadores nacionales (509 vs. 531 ms) lo que se reflejó en un tiempo total de actuación menor (683 vs. 703 ms). Por último, en cuanto al rendimiento del resto, los jugadores internacionales obtuvieron valores superiores a los jugadores nacionales (1.3 vs. 0.9). ABSTRACT Although there have been significant advances in laboratory studies with unrepresentative experimental designs (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), today it is still unknown to full extent how tennis players of different levels of expertise calibrate or adjust their movements to the spatial-temporal demands present in the return of a first serve. Few studies have been carried out in situ and some aspects of the methodology most of them used can be questioned. Thus, in several studies the recording frequency has been limited (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), or serve speed was visibly lower than the usual one (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). Also, in some studies, experienced participants have not played at international level (e.g., Avilés, Ruiz, Sanz y Navia, 2014), and the sample size has been very small (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). Furthermore, different works have used a variety of methods and measurement instruments and coding criteria of the onset of movements and responses have differed; due to this, visuomotor response delay (LVMr) has been very uneven, varying considerably from 198-410 ms. Considering the drawbacks mentioned above, this study aimed to determine a technical model of temporal regulation of movements and returner’s response, taking into account the continuous flow of information provided by the server. For this, a chronometric analysis of the returns of twelve players (six international and six national) of different sports level, that naturally responded by hitting their returns towards the targets, was performed. Actions of servers and returners were recorded with a Casio Exilim Pro Ex-F1 high speed camera (300 Hz) and then every 3.33 ms analysis was made frame by frame. Once the data of the videos were obtained, analyses were performed using one factor ANOVA test, ANCOVA with the speed of the serve as a covariate, U of Mann- Whitney and Pearson’s Chi-square test. As for the regulation of movement until the moment of serve, international players began their actions before national players, which could indicate that they were better prepared to execute movements reflecting the level of their expertise. International players began raising the rear foot at -293 ms and national players at -202 ms. All these actions were being linked to each other and it was at the moment of impact of the server when the receivers demonstrated a remarkable perceptual-motor coordination. Therefore, international players took off and started their flight just -6.5 ms before the serve and national players did the same somewhat later: +19.5 ms after the serve. Along the timeline, everything seems to indicate that the information used by returners interact with each other; early information which is less reliable to anticipate or move before, and later information more reliable appears to regulate the timing of actions. Returners of international and national levels anticipated at spatial level in a low percentage (7.7% vs. 13.6%) and in similar times (-127 vs. -118 ms) suggesting that the use of early and less reliable optical variables is only produced on rare occasions. Moreover, these data relate to a precise response as both international and national players showed a high percentage of success in responding (95.4% vs. 96.7%). It had been noted that international and national players would differ in the time the fall (i.e., landing) of the first foot of the split-step, however, this effect was not found (128 vs. 135 ms). No differences in the percentage of fall with the opposite foot to the direction of the ball (58% vs. 62%) were found. Where the two groups differed was in the time of the fall of the second foot (147 vs. 168 ms). This difference of 21 ms was crucial and it was a proof of mayor speed of international players; suggesting that this action could be related to the onset time of response. Although international players have proven to be faster in relation to their functional capabilities, both groups did not differ in all variables related to LVMr. They did not use those precious milliseconds earned at the time of the fall of the second foot to respond as soon, since the LVMr of the upper limb was the same for both groups (179 vs. 174 ms). It is as if they had all the time in the world to continue to adjust their actions until the return itself. Furthermore, these long times suggest that in the vast majority of the returns, key information that determined the response was detected (pick-up) in moments close to the hit of the server and in the first part of the ball flight. It was also found that in general the LVMr is influenced by the type of information used. Thus, when taking into account the trials during which there was spatial anticipation, reflected in LVMr of the whole body, the times decreased (152 vs. 136 ms). On the other hand, there were occasions (13%) where both international and national players responded late, thus receiving aces (208 vs. 195 ms). It is quite possible that in these cases the players have had trouble to pick-up information, responding out of temporary margins of action, which affected their performance. The same could have occurred when both groups of players corrected upper limb movement after impact (17% vs. 10%), which increased the time to respond and to redirect the return towards the right side (208 vs. 205 ms). Moreover, international players scored lower movement times than the national players (509 vs. 531 ms), which was reflected in a shorter total response time (683 vs. 703 ms). Finally, as far as the performance of return is concerned, international players scored above the national players values (1.3 vs. 0.9).

Side effects of modern pesticides on adults of the predatory mite Amblyseius swirskii (Athias-Henriot) (Acari: Phytoseiidae) under laboratory conditions

Amblyseius swirskii (Athias-Henriot) is a polyphagous predatory mite which feeds on pollen and small arthropod preys like whiteflies, thrips and mites. This species is widely used in IPM programs in greenhouses, being essential for its success, to obtain information about the non target effects of the pesticides currently used in those crops where the mite is artificially released. This work describes a laboratory contact residual test for evaluating lethal (mortality after 72 hour exposure to fresh residues) and sublethal effects (fecundity and fertility of the surviving mites) of eleven modern pesticides to adults of A. swirskii. Spiromesifen is lipogenesis inhibitor; flonicamid a selective feeding inhibitor with a mode of action not totally known; flubendiamide a modulator of the rhyanodin receptor, sulfoxaflor has a complex mode of action not totally ascertained; metaflumizone is a voltage dependent sodium channel blocker; methoxyfenozide is an IGR, spirotetramat inhibits lipids; abamectin and emamectin activate the Cl- channel; spinosad is a neurotix naturalyte and deltamethrin a pyrethroid used as positive standard. Selected pesticides are effective against different key pests present in horticultural crop areas and were always applied at the maximum field recommended concentration in Spain if registered, or at the concentration recommended by the supplier. Out of the tested pesticides, spiromesifen, flonicamid, flubendiamide, sulfoxaflor, metaflumizone, methoxyfenozide and spirotetramat were harmless to adults of the predatory mite (IOBC toxicity class 1). The rest of pesticides exhibited some negative effects: emamectin was slightly harmful (IOBC 2), deltamethrin moderately harmful (IOBC 3) and spinosad and abamectin harmful (IOBC 4). Further testing under more realistic conditions is needed for those pesticides having some harmful effect on the mite prior deciding their joint use or not. Key words: Amblyseius swirskii, adults, laboratory, residual test, spiromesifen, flonicamid, flubendiamide, sulfoxaflor, metaflumizone, methoxyfenozide, spirotetramat, emamectin, deltamethrin, abamectin, spinosad.