Safety assessment of underground vehicles passing over highly resilient curved tracks in the presence of a broken rail

Vehicle–track interaction for a new resilient slab track designed to reduce noise and vibration levels was analysed, in order to assess the derailment risk on a curved track when encountering a broken rail. Sensitivity of the rail support spacing of the relative position of the rail breakage between two adjacent rail supports and of running speed were analysed for two different elasticities of the rail fastening system. In none of the cases analysed was observed an appreciable difference between either of the elastic systems. As was expected, the most unfavourable situations were those with greater rail support spacing and those with greater distance from the breakage to the nearest rail support, although in none of the simulations performed did a derailment occur when running over the broken rail. When varying the running speed, the most favourable condition was obtained for an intermediate speed, due to the superposition of two antagonistic effects.

Reverse logistics systems for waste generated throughout vehicles life-cycle

Waste produced during the service life of automobiles has received much less attention than end-of-life vehicles themselves. In this paper, we deal with the set up of a reverse logistics system for the collection and treatment of use-phase residues. First, the type of waste arising during vehicles? service life is characterized. Data were collected in collaboration with SIGRAUTO, the product stewardship organization in charge of vehicles? recovery in Spain. Next, three organizational models are proposed. The three alternatives are benchmarked and assessed from a double organizational and operational perspective for the particular case of the Madrid region in Spain

A Multiresolution Image Alignment Technique Based on Direct Methods for Pose Estimation of Aerial Vehicles

In this paper, we seek to expand the use of direct methods in real-time applications by proposing a vision-based strategy for pose estimation of aerial vehicles. The vast majority of approaches make use of features to estimate motion. Conversely, the strategy we propose is based on a MR (Multi-Resolution) implementation of an image registration technique (Inverse Compositional Image Alignment ICIA) using direct methods. An on-board camera in a downwards-looking configuration, and the assumption of planar scenes, are the bases of the algorithm. The motion between frames (rotation and translation) is recovered by decomposing the frame-to-frame homography obtained by the ICIA algorithm applied to a patch that covers around the 80% of the image. When the visual estimation is required (e.g. GPS drop-out), this motion is integrated with the previous known estimation of the vehicles' state, obtained from the on-board sensors (GPS/IMU), and the subsequent estimations are based only on the vision-based motion estimations. The proposed strategy is tested with real flight data in representative stages of a flight: cruise, landing, and take-off, being two of those stages considered critical: take-off and landing. The performance of the pose estimation strategy is analyzed by comparing it with the GPS/IMU estimations. Results show correlation between the visual estimation obtained with the MR-ICIA and the GPS/IMU data, that demonstrate that the visual estimation can be used to provide a good approximation of the vehicle's state when it is required (e.g. GPS drop-outs). In terms of performance, the proposed strategy is able to maintain an estimation of the vehicle's state for more than one minute, at real-time frame rates based, only on visual information.

Non-linear Control of an Autonomous Ground Vehicle

In this paper, in order to select a speed controller for a specific non-linear autonomous ground vehicle, proportional-integral-derivative (PID), Fuzzy, and linear quadratic regulator (LQR) controllers were designed. Here, in order to carry out the tuning of the above controllers, a multicomputer genetic algorithm (MGA) was designed. Then, the results of the MGA were used to parameterize the PID, Fuzzy and LQR controllers and to test them under laboratory conditions. Finally, a comparative analysis of the performance of the three controllers was conducted.

Fault Tolerance Analysis and Self-Healing Strategy of Autonomous, Evolvable Hardware Systems

This paper presents an analysis of the fault tolerance achieved by an autonomous, fully embedded evolvable hardware system, which uses a combination of partial dynamic reconfiguration and an evolutionary algorithm (EA). It demonstrates that the system may self-recover from both transient and cumulative permanent faults. This self-adaptive system, based on a 2D array of 16 (4×4) Processing Elements (PEs), is tested with an image filtering application. Results show that it may properly recover from faults in up to 3 PEs, that is, more than 18% cumulative permanent faults. Two fault models are used for testing purposes, at PE and CLB levels. Two self-healing strategies are also introduced, depending on whether fault diagnosis is available or not. They are based on scrubbing, fitness evaluation, dynamic partial reconfiguration and in-system evolutionary adaptation. Since most of these adaptability features are already available on the system for its normal operation, resource cost for self-healing is very low (only some code additions in the internal microprocessor core)

Automatic lateral control for unmanned vehicles via genetic algorithms

It is known that the techniques under the topic of Soft Computing have a strong capability of learning and cognition, as well as a good tolerance to uncertainty and imprecision. Due to these properties they can be applied successfully to Intelligent Vehicle Systems; ITS is a broad range of technologies and techniques that hold answers to many transportation problems. The unmannedcontrol of the steering wheel of a vehicle is one of the most important challenges facing researchers in this area. This paper presents a method to adjust automatically a fuzzy controller to manage the steering wheel of a mass-produced vehicle; to reach it, information about the car state while a human driver is handling the car is taken and used to adjust, via iterative geneticalgorithms an appropriated fuzzy controller. To evaluate the obtained controllers, it will be considered the performance obtained in the track following task, as well as the smoothness of the driving carried out.

Driving assistance system applied in curves for real vehicles | Sistema de ayuda a la conducción en curvas para vehículos reales

Decreasing the accidents on highway and urban environments is the main motivation for the research and developing of driving assistance systems, also called ADAS (Advanced Driver Assistance Systems). In recent years, there are many applications of these systems in commercial vehicles: ABS systems, Cruise Control (CC), parking assistance and warning systems (including GPS), among others. However, the implementation of driving assistance systems on the steering wheel is more limited, because of their complexity and sensitivity. This paper is focused in the development, test and implementation of a driver assistance system for controlling the steering wheel in curve zones. This system is divided in two levels: an inner control loop which permits to execute the position and speed target, softening the action over the steering wheel, and a second control outer loop (controlling for fuzzy logic) that sends the reference to the inner loop according the environment and vehicle conditions. The tests have been done in different curves and speeds. The system has been proved in a commercial vehicle with satisfactory results.

Diseño de un modelo de riesgo integral de incendios forestales mediante técnicas multicriterio y su automatización en sistemas de información geográfica : una aplicación en la Comunidad Valenciana

Los incendios forestales son la principal causa de mortalidad de árboles en la Europa mediterránea y constituyen la amenaza más seria para los ecosistemas forestales españoles. En la Comunidad Valenciana, diariamente se despliega cerca de un centenar de vehículos de vigilancia, cuya distribución se apoya, fundamentalmente, en un índice de riesgo de incendios calculado en función de las condiciones meteorológicas. La tesis se centra en el diseño y validación de un nuevo índice de riesgo integrado de incendios, especialmente adaptado a la región mediterránea y que facilite el proceso de toma de decisiones en la distribución diaria de los medios de vigilancia contra incendios forestales. El índice adopta el enfoque de riesgo integrado introducido en la última década y que incluye dos componentes de riesgo: el peligro de ignición y la vulnerabilidad. El primero representa la probabilidad de que se inicie un fuego y el peligro potencial para que se propague, mientras que la vulnerabilidad tiene en cuenta las características del territorio y los efectos potenciales del fuego sobre el mismo. Para el cálculo del peligro potencial se han identificado indicadores relativos a los agentes naturales y humanos causantes de incendios, la ocurrencia histórica y el estado de los combustibles, extremo muy relacionado con la meteorología y las especies. En cuanto a la vulnerabilidad se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructuras de defensa), como de las características del terreno (valor, capacidad de regeneración…). Todos estos indicadores constituyen una estructura jerárquica en la que, siguiendo las recomendaciones de la Comisión europea para índices de riesgo de incendios, se han incluido indicadores representativos del riesgo a corto plazo y a largo plazo. El cálculo del valor final del índice se ha llevado a cabo mediante la progresiva agregación de los componentes que forman cada uno de los niveles de la estructura jerárquica del índice y su integración final. Puesto que las técnicas de decisión multicriterio están especialmente orientadas a tratar con problemas basados en estructuras jerárquicas, se ha aplicado el método TOPSIS para obtener la integración final del modelo. Se ha introducido en el modelo la opinión de los expertos, mediante la ponderación de cada uno de los componentes del índice. Se ha utilizado el método AHP, para obtener las ponderaciones de cada experto y su integración en un único peso por cada indicador. Para la validación del índice se han empleado los modelos de Ecuaciones de Estimación Generalizadas, que tienen en cuenta posibles respuestas correlacionadas. Para llevarla a cabo se emplearon los datos de oficiales de incendios ocurridos durante el período 1994 al 2003, referenciados a una cuadrícula de 10x10 km empleando la ocurrencia de incendios y su superficie, como variables dependientes. Los resultados de la validación muestran un buen funcionamiento del subíndice de peligro de ocurrencia con un alto grado de correlación entre el subíndice y la ocurrencia, un buen ajuste del modelo logístico y un buen poder discriminante. Por su parte, el subíndice de vulnerabilidad no ha presentado una correlación significativa entre sus valores y la superficie de los incendios, lo que no descarta su validez, ya que algunos de sus componentes tienen un carácter subjetivo, independiente de la superficie incendiada. En general el índice presenta un buen funcionamiento para la distribución de los medios de vigilancia en función del peligro de inicio. No obstante, se identifican y discuten nuevas líneas de investigación que podrían conducir a una mejora del ajuste global del índice. En concreto se plantea la necesidad de estudiar más profundamente la aparente correlación que existe en la provincia de Valencia entre la superficie forestal que ocupa cada cuadrícula de 10 km del territorio y su riesgo de incendios y que parece que a menor superficie forestal, mayor riesgo de incendio. Otros aspectos a investigar son la sensibilidad de los pesos de cada componente o la introducción de factores relativos a los medios potenciales de extinción en el subíndice de vulnerabilidad. Summary Forest fires are the main cause of tree mortality in Mediterranean Europe and the most serious threat to the Spanisf forest. In the Spanish autonomous region of Valencia, forest administration deploys a mobile fleet of 100 surveillance vehicles in forest land whose allocation is based on meteorological index of wildlandfire risk. This thesis is focused on the design and validation of a new Integrated Wildland Fire Risk Index proposed to efficient allocation of vehicles and specially adapted to the Mediterranean conditions. Following the approaches of integrated risk developed last decade, the index includes two risk components: Wildland Fire Danger and Vulnerability. The former represents the probability a fire ignites and the potential hazard of fire propagation or spread danger, while vulnerability accounts for characteristics of the land and potential effects of fire. To calculate the Wildland Fire Danger, indicators of ignition and spread danger have been identified, including human and natural occurrence agents, fuel conditions, historical occurrence and spread rate. Regarding vulnerability se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructurasd de defensa), como de las características del terreno (valor, capacidad de regeneración…). These indicators make up the hierarchical structure for the index, which, following the criteria of the European Commission both short and long-term indicators have been included. Integration consists of the progressive aggregation of the components that make up every level in risk the index and, after that, the integration of these levels to obtain a unique value for the index. As Munticriteria methods are oriented to deal with hierarchically structured problems and with situations in which conflicting goals prevail, TOPSIS method is used in the integration of components. Multicriteria methods were also used to incorporate expert opinion in weighting of indicators and to carry out the aggregation process into the final index. The Analytic Hierarchy Process method was used to aggregate experts' opinions on each component into a single value. Generalized Estimation Equations, which account for possible correlated responses, were used to validate the index. Historical records of daily occurrence for the period from 1994 to 2003, referred to a 10x10-km-grid cell, as well as the extent of the fires were the dependant variables. The results of validation showed good Wildland Fire Danger component performance, with high correlation degree between Danger and occurrence, a good fit of the logistic model used and a good discrimination power. The vulnerability component has not showed a significant correlation between their values and surface fires, which does not mean the index is not valid, because of the subjective character of some of its components, independent of the surface of the fires. Overall, the index could be used to optimize the preventing resources allocation. Nevertheless, new researching lines are identified and discussed to improve the overall performance of the index. More specifically the need of study the inverse relationship between the value of the wildfire Fire Danger component and the forested surface of each 10 - km cell is set out. Other points to be researched are the sensitivity of the index component´s weight and the possibility of taking into account indicators related to fire fighting resources to make up the vulnerability component.

Soft-computing based visual control for unmanned vehicles

El objetivo principal de esta Tesis es extender la utilización del “Soft- Computing” para el control de vehículos sin piloto utilizando visión. Este trabajo va más allá de los típicos sistemas de control utilizados en entornos altamente controlados, demonstrando la fuerza y versatilidad de la lógica difusa (Fuzzy Logic) para controlar vehículos aéreos y terrestres en un abanico de applicaciones diferentes. Para esta Tesis se ha realizado un gran número de pruebas reales en las cuales los controladores difusos han manejado una plataforma visual “pan-and-tilt”, un helicoptero, un coche comercial y hasta dos tipos de quadrirotores. El uso del método de optimización “Cross-Entropy” ha sido utilizado para mejorar el comportamiento de algunos de los controladores borrosos. Todos los controladores difusos presentados en ésta Tesis han sido implementados utilizando un código desarrollado por el candidato para tal efecto, llamado MOFS (Miguel Olivares’ Fuzzy Software). Diferentes algoritmos visuales han sido utilizados para adquirir la informaci´on visual del entorno, “Cmashift”, descomposición de la homografía y detección de marcas de realidad aumentada, entre otros. Dicha información visual ha sido utilizada como entrada de los controladores difusos para comandar los vehículos en las diferentes applicaciones autonomas. El volante de un vehículo comercial ha sido controlado para realizar pruebas de conducción autónoma en condiciones de tráfico similares a las de una ciudad. El sistema ha llegado a completar con éxito pruebas de más de 6 km sin ninguna interacción humana, mediante el seguimiento de una línea pintada en el suelo. El limitado campo visual del sistema no ha sido impedimento para alcanzar velocidades de hasta 48 km/h y ser guiado autonomamente en curvas de radio reducido. Objetos estáticos y móviles han sido seguidos desde un helicoptero no tripulado, mediante el control de una plataforma visual “pan-and-tilt”. ´Éste mismo helicoptero ha sido controlado completamente para su aterrizaje autonomo, mediante el control del movimiento lateral (roll), horizontal (pitch) y de altitud. El seguimiento de objetos volantes ha sido resulto mediante el control horizontal (pitch) y de orientación (heading) de un quadrirotor. Para tareas de evitación de obstáculos se ha implementado un controlador difuso para el manejo de la orientación (heading) de un quadrirotor. En el campo de la optimización de controladores se ha aportado al estado del arte una extensión del uso del método “Cross-Entropy”. Está Tesis presenta una novedosa implementación de dicho método para la optimización de las ganancias, la posición y medida de los conjuntos de las funciones de pertenecia y el peso de las reglas para mejorar el comportamiento de un controlador difuso. Dichos procesos de optimización se han realizado utilizando “ROS” y “Matlab Simulink” para obtener mejores resultados para la evitación de colisiones con vehículos aéreos no tripulados. Ésta Tesis demuestra que los controladores implementados con lógica difusa son altamente capaces de controlador sistemas sin tener en cuenta el modelo del vehículo a controlador en entornos altamente perturbables con un sensor de bajo coste como es una cámara. El ruido presentes causado por los cambios de iluminación en la adquisición de imágenes y la alta incertidumbre en la detección visual han sido manejados satisfactoriamente por ésta técnica de de “Soft-Computing” para distintas aplicaciones tanto con vehículos aéreos como terrestres.

Use of calculus of variations to determine the shape of hovering rotors of minimum power and its application to micro air vehicles

In this paper, calculus of variations and combined blade element and momentum theory (BEMT) are used to demonstrate that, in hover, when neither root nor tip losses are considered; the rotor, which minimizes the total power (MPR), generates an induced velocity that varies linearly along the blade span. The angle of attack of every blade element is constant and equal to its optimum value. The traditional ideal twist (ITR) and optimum (OR) rotors are revisited in the context of this variational framework. Two more optimum rotors are obtained considering root and tip losses, the ORL, and the MPRL. A comparison between these five rotors is presented and discussed. The MPR and MPRL present a remarkable saving of power for low values of both thrust coefficient and maximum aerodynamic efficiency. The result obtained can be exploited to improve the aerodynamic behaviour of rotary wing micro air vehicles (MAV). A comparison with experimental results obtained from the literature is presented.

Development of a novel autonomous robot for navigation and inspect in oil wells

This paper proposes a novel robotic system that is able to move along the outside of the oil pipelines used in Electric Submersible Pumps (ESP) and Progressive Cavity Pumps (PCP) applications. This novel design, called RETOV, proposes a light weight structure robot that can be equipped with sensors to measure environmental variables avoiding damage in pumps and wells. In this paper, the main considerations and methodology of design and implementation are discussed. Finally, the first experimental results that show RETOV moving in vertical pipelines are analyzed.

Analysis of lateral dynamics of railway vehicles on viaducts with coupled models

The study of lateral dynamics of running trains on bridges is of importance mainly for the safety of the traffic, and may be relevant for laterally compliant bridges. These studies require 3D coupled vehicle-bridge models, and consideration of wheel to rail contact, a phenomenon which is complex and costly to model in detail. We describe here a fully nonlinear coupled model, described in absolute coordinates and incorporated into a commercial finite element framework. Two applications are presented, firstly to a vehicle subject to a strong wind gust traversing a br idge, showing the relevance of the nonlinear wheel-rail contact model as well as the interaction between bridge and vehicle. The second application is to a real viaduct in a high-speed line, with a long continuous deck and tall piers with high lateral compliance. The results show the safety of the traffic as well as the relevance of considering the wind action and the nonlinear response.

Ontology driven description and engineering of autonomous systems: application to process system engineering

Autonomous systems refer to systems capable of operating in a real world environment without any form of external control for extended periods of time. Autonomy is a desired goal for every system as it improves its performance, safety and profit. Ontologies are a way to conceptualize the knowledge of a specific domain. In this paper an ontology for the description of autonomous systems as well as for its development (engineering) is presented and applied to a process. This ontology is intended to be applied and used to generate final applications following a model driven methodology.

Quadcopter see and avoid using a fuzzy controller

Unmanned Aerial Vehicles (UAVs) industry is a fast growing sector. Nowadays, the market offers numerous possibilities for off-the-shelf UAVs such as quadrotors or fixed-wings. Until UAVs demonstrate advance capabilities such as autonomous collision avoidance they will be segregated and restricted to flight in controlled environments. This work presents a visual fuzzy servoing system for obstacle avoidance using UAVs. To accomplish this task we used the visual information from the front camera. Images are processed off-board and the result send to the Fuzzy Logic controller which then send commands to modify the orientation of the aircraft. Results from flight test are presented with a commercial off-the-shelf platform.

Finite Element Analysis Model of a Contactless Transformer for Battery Chargers in Electric Vehicles

A contactless transformer model is proposed in this paper using Finite Element Analysis (FEA). This model can be used to simulate Inductive Coupling Power Transfer (ICPT) systems with good accuracy of the transformer and reduce the fabrication time of these systems. The model not only takes into account the geometry of the windings but also the frequency effects in them. As the transformer does not have a magnetic core, it is complicated to model because the flux is expanded in the area around the windings. In order to obtain a very accurate model, it is necessary to use a 2D/3D field solver.