First 20 years of DNDC: Model evolution and GRAMP.

The DNDC (DeNitrification and DeComposition) model was first developed by Li et al. (1992) as a rain event-driven process-orientated simulation model for nitrous oxide, carbon dioxide and nitrogen gas emissions from the agricultural soils in the U.S. Over the last 20 years, the model has been modified and adapted by various research groups around the world to suit specific purposes and circumstances. The Global Research Alliance Modelling Platform (GRAMP) is a UK-led initiative for the establishment of a purposeful and credible web-based platform initially aimed at users of the DNDC model. With the aim of improving the predictions of soil C and N cycling in the context of climate change the objectives of GRAMP are to: 1) to document the existing versions of the DNDC model; 2) to create a family tree of the individual DNDC versions; 3) to provide information on model use and development; and 4) to identify strengths, weaknesses and potential improvements for the model.

Water and nitrogen footprint in an irrigated crop under mineral and organic fertilization

In order to establish rational nitrogen (N) application and reduce groundwater contamination, a clearer understanding of the N distribution through the growing season and its balance is crucial. Excessive doses of N and/or water applied to fertigated crops involve a substantial risk of aquifer contamination by nitrate; but knowledge of N cycling and availability within the soil could assist in avoiding this excess. In central Spain, the main horticultural fertigated crop is the melon type ?piel de sapo¿ and it is cultivated in vulnerable zones to nitrate pollution (Directive 91/676/CEE). However, until few years ago there were not antecedents related to the optimization of nitrogen fertilization together with irrigation. Water and N footprint are indicators that allow assessing the impact generated by different agricultural practices, so they can be used to improve the management strategies in fertigated crop systems. The water footprint distinguishes between blue water (sources of water applied to the crop, like irrigation and precipitation), green water (water used by the crop and stored in the soil), and it is furthermore possible to quantify the impact of pollution by calculating the grey water, which is defined as the volume of polluted water created from the growing and production of crops. On the other hand, the N footprint considers green N (nitrogen consumed by the crops and stored in the soil), blue N (N available for crop, like N applied with mineral and/or organic fertilizers, N applied with irrigation water and N mineralized during the crop period), whereas grey N is the amount of N-NO3- washed from the soil to the aquifer. All these components are expressed as the ratio between the components of water or N footprint and the yield (m3 t-1 or kg N t-1 respectively). The objetives of this work were to evaluate the impact derivated from the use of different fertilizer practices in a melon crop using water and N footprint.

The relevance of seed size in modulating leaf physiology and early plant performance in two tree species

he size of seeds and the microsite of seed dispersal may affect the early establishment of seedlings through different physiological processes. Here, we examined the effects of seed size and light availability on seedling growth and survival, and whether such effects were mediated by water use efficiency. Acorns of Quercus petraea and the more drought-tolerant Quercus pyrenaica were sowed within and around a tree canopy gap in a sub-Mediterranean forest stand. We monitored seedling emergence and measured predawn leaf water potential (Ψpd), leaf nitrogen per unit area (Na), leaf mass per area, leaf carbon isotope composition (δ13C) and plant growth at the end of the first summer. Survival was measured on the next year. Path analysis revealed a consistent pattern in both species of higher δ13C as Ψpd decreased and higher δ13C as seedlings emerged later in the season, indicating an increase in 13C as the growing season is shorter and drier. There was a direct positive effect of seed size on δ13C in Q. petraea that was absent in Q. pyrenaica. Leaf δ13C had no effect on growth but the probability of surviving until the second year was higher for those seedlings of Q. pyrenaica that had lower δ13C on the first year. In conclusion, leaf δ13C is affected by seed size, seedling emergence time and the availability of light and water, however, leaf δ13C is irrelevant for first year growth, which is directly dependent on the amount of seed reserves.

Estudios de eficiencia en el uso de la luz y estimaciones de biomasa en cultivos energéticos de Salix sp. en Central New York, USA

La productividad es un factor importante que influye en la viabilidad económica de un cultivo energético de sauce y maximizarla se convierte en un tema primordial. Esta investigación está directamente relacionada con dicha característica. La productividad varía según los clones cultivados, que pueden ser mejorados y seleccionados genéticamente. Los programas genéticos requieren de una información previa (productividad media en función del porte y número de los tallos, características de las hojas, resistencia a las plagas, etc.) que ayudará a obtener clones más productivos y resistentes. Por ello, nuestra investigación consta de dos estudios: (1) Evaluación de la eficiencia del uso de la luz o LUE (Light Use Efficiency). El incremento de biomasa y la eficiencia del uso de la luz (LUE) fue estudiado en 15 clones del genero Salix durante los meses de junio a septiembre de 2011 en Belleville (Central New York, USA). Los objetivos de este estudio fueron: (1) Evaluar la eficiencia del uso de la luz en la explicación a la variación en la producción de biomasa y (2) Determinar si existen diferencias significativas entre clones evaluando el índice de área foliar (LAI) y algunos componentes de las hojas (N, P, K,…). Se concluye que la variación de biomasa está relacionada con la cantidad de luz interceptada y con la eficiencia de su uso. Dicha información debe de ser transferida para ayudar a mejorar genéticamente los futuros clones a comercializar, con el fin de maximizar la productividad y aumentar la resistencia a plagas. (2) Estimación de biomasa a través de modelos de regresión. Los estudios de investigación relacionados con la productividad requieren estimaciones no destructivas de la biomasa aérea. Sin embargo, el nivel de precisión requerido y la inversión de tiempo son excesivos para operaciones comerciales con grandes extensiones (plantaciones de 10.000 ha). Por esta razón, se estudia el nivel de especificidad (específico, intermedio y general) en la toma de datos de campo sobre los mismos 15 clones (12 de ellos se pueden agrupar en 5 grupos según su genotipo origen) del genero Salix, empleados en el estudio anterior. Para todos los niveles estudiados se observaron diferencias significativas. Pero desde nuestro punto de vista, las diferencias obtenidas no son relevantes. Para validar los modelos finalmente seleccionados se calcularon los porcentajes de error entre la biomasa estimada por los modelos de regresión calculados y la biomasa real obtenida tras los pesajes de biomasa, todo ello se realizó para cada clon según nivel de especificidad. ABSTRACT Productivity is an important factor in the economic viability of a willow crop´s, therefore, maximize it becomes a major factor. This study is directly related to this feature. Productivity, among other factors, may vary depending on different clones, which can be improved and selected genetically. Genetic programs require prior information (average productivity, size and number of stems, leaf characteristics, resistance to pests, etc.) to help you get more productive clones resistant to local pests. Our research consists of two studies: (1) Evaluation of the efficiency of use of light (LUE, Light Use Efficiency). The increase of biomass and light use efficiency (LUE) was tested on 15 clones of the genus Salix during June and September 2011 in Belleville (Central New York, USA). The objectives of this study were: (1) evaluate the light use efficiency and its relationship with the variation in biomass production and (2) determine whether there are significant differences between clones evaluating the leaf area index (LAI) and some traits of the leaves (N, P, K). We studied the correlation with the light use efficiency. It is concluded that the variation of biomass was related to the amount of light intercepted and its efficiency. Such information must be transferred to help improve future genetically clones to market in order to maximize productivity and increase resistance to pests. (2) Estimation of biomass through regression models. Research studies related to productivity estimates require precision and non destructive biomass. However, the level of accuracy required and the investment of time are excessive for large commercial operations with extensions (plantations of 10,000 ha). Precisely for this reason, we study the level of specificity (specific, intermediate and general) in making field data on the same 15 clones (12 of them can be grouped into five groups according to their genotype origin) of the genus Salix, employees in the previous study. For all levels studied some significant differences were observed. But from our practical standpoint, the differences are not relevant. Finally, to validate the selected models, we calculated the percent of bias between estimated biomass (by the regression models) and real biomass obtained after the weighing of biomass, all this process was done for each clone by level of specificity.

Análisis de las diferencias en el crecimiento vegetativo, en los componentes del rendimiento y en la composición de las uvas y vinos del cv. cabernet sauvignon (vitis vinifera L.), producidos por el déficit hídrico durante pre-envero y post-envero

La presente Tesis Doctoral se realizó con el fin de estimar conjuntamente la respuesta agronómica y fisiológica de la vid (Vitis vinifera L.), así como los efectos sobre la evolución de la maduración, composición y la calidad de la uva y del vino, bajo la aplicación de diferentes déficit hídricos en pre-envero y post-envero, dentro de un marco de referencia de cambio climático. La variación climática que prevén los estudios sobre el cambio climático, resulta un factor decisivo en la eficiencia del uso del agua en la vid. En zonas cálidas, las estrategias de cultivo del viñedo frente al cambio climático deben de ir dirigidas a atenuar sus efectos sobre el crecimiento y el desarrollo de la vid, haciéndose imprescindible el estudio pormenorizado del déficit hídrico como factor decisivo en la obtención de las uvas adecuadas, ya que son la clave indispensable para el éxito en la elaboración del vino, y de forma muy especial en los vinos enfocados a un sector de alta calidad. El ensayo se llevó a cabo en un viñedo comercial de Bodegas Licinia, en la Comunidad de Madrid, durante los años 2010 y 2011. La variedad estudiada fue Cabernet sauvignon / 41 B, plantada a un marco de plantación de 3 m x 1 m, con un guiado vertical de la vegetación. El dispositivo experimental fue totalmente al azar, y se establecieron 4 tratamientos experimentales con 4 grados de disponibilidad hídrica, déficit moderado continuo (T0,45-0,6), déficit severo continuo (T0-0,3), déficit severo después de envero (T0,45-0,3) y déficit severo antes de envero (T0-0,6). En cada tratamiento se distribuyeron 3 repeticiones. El año 2010 fue el más lluvioso de los años de ensayo, con 478 mm de precipitaciones anuales, lo que supuso 146 mm más que en el año 2011. Su distribución a lo largo del ciclo fue más homogénea en el año 2010, mientras que en 2011 las precipitaciones contabilizadas en el período de maduración de la uva fueron nulas. La temperatura media subió 0,9ºC en 2011, respecto a 2010 y en cuanto a la integral térmica eficaz, en 2011 se acumularon, desde el 1 de abril hasta el final de ciclo, 217 grados•día más que en 2010. El déficit hídrico en pre-envero, modificó notablemente el crecimiento vegetativo y la producción de cosecha de la parcela de ensayo, no así la fertilidad de las yemas. El tratamiento con mayor disponibilidad hídrica (T0,45-0,6) obtuvo el mayor peso de baya, y los tratamientos con menor déficit hídrico en pre-envero (T0,45-0,6 y T0,45-0,3) registraron los mayores rendimientos de cosecha, mientras que las menores tasas de cuajado correspondieron al tratamiento con un déficit severo continuo (T0-0,3). La parcela de ensayo se caracterizó por un exceso de vigor y un alto crecimiento vegetativo. El pH del mosto se vio afectado por el déficit hídrico, disminuyendo su valor en el tratamiento de déficit hídrico severo antes de envero (T0-0,6). Organolépticamente, no se percibieron diferencias significativas en los vinos elaborados en función del déficit hídrico, y respecto a su composición físico-química, solo existieron diferencias en la concentración de ácido L-Málico, con mayores concentraciones en los tratamientos sin déficit hídrico en pre-envero, T0,45-0,6 y T0,45-0,3. El déficit hídrico modificó notablemente el color del vino, aumentando los valores de las coordenadas CIELAB a* y b*, la luminosidad (L*), croma (C*) y tonalidad (H*), para los tratamientos con un déficit severo en pre-envero (T0-0,3 y T0-0,6) y disminuyendo estas en el tratamiento con mayor disponibilidad hídrica (T0,45-0,6). Del mismo modo, mediante el análisis de color por métodos tradicionales, IPT e IC de los vinos, aumentó en los tratamientos con mayor déficit hídrico en pre-envero (T0-0,3 y T0-0,6), respecto a los tratamientos de mayor disponibilidad (T0,45-0,6 y T0,45-0,3). La concentración de taninos de la baya en vendimia, no se vio afectada por el déficit hídrico, aunque sí estuvo relacionada positivamente con el tamaño de las bayas. Organolépticamente, los hollejos del año 2011 resultaron con menor frescura, acidez, afrutado, sensación herbácea e intensidad tánica, aunque con mayor astringencia respecto a 2010. Las pepitas fueron más astringentes y aromáticas pero menos crujientes, sin llegar a los niveles de madurez del año 2010. El catador relacionó los taninos con la calidad del vino, asociándolos con un mayor cuerpo, acidez, intensidad, equilibrio gustativo, amargor y menor astringencia en la fase gustativa. La concentración de taninos en los vinos se vio favorecida con el déficit hídrico en pre-envero y post-envero. Los tratamientos con mayor déficit hídrico en pre-envero, T0-0,6 y T0-0,3, obtuvieron las menores concentraciones de potasio en mostos y vinos. Las relaciones entre la concentración de potasio, ácido L-Málico y el porcentaje de color rojo puro (dA(%)) resultaron altamente significativas, de modo que las mayores tasas de potasio en el vino se asociaron a los valores más bajos de color rojo y a los mayores de ácido L-Málico. ABSTRACT The present Doctoral Thesis has been done in order to estimate the grapevine (Vitis vinifera L.) agronomic and physiologic performance or response as well as the impact in the grape and wine maturity, composition and quality evolution, with different water deficits. The variation in climate that the global warming studies for seen is a key factor for the grapevine water use efficiency. In warm areas the farming vineyards strategy to face the climatic change, should be focused on diminish the effects on the grapevine growth and development, so that the water deficit detailed analysis becomes decisive to obtain the appropriate grapes, that are the main subject for a successful wine production and especially for top quality wines. The trial was carried out in a commercial vineyard in Chinchón (Madrid), Licinia winery, during the 2010 and 2011 seasons. The grape variety studied was Cabernet Sauvignon grafted onto 41B with a vine spacing 3m x 1m trained as VSP. Experimental design consisted on 4 irrigation treatments with 3 replications totally randomized. Irrigation treatments were: moderate regulated deficit (T0,45-0,6), severe continuous deficit (T0-0,3), severe post-veraison deficit (T0,45-0,3) and severe pre veraison deficit (T0-0,6). The 2010 was rainier year than the 2011; Total annual rain in 2010 was 478 mm, which resulted in 146 mm more than in 2011. The distribution along the vine cycle was more homogeneous in the 2010, whereas precipitations in 2011 along the grape maturity period were nonexistent. The average temperature in 2011 was 0,9ºC higher than that of the 2010 and regarding to the thermal integral, in the 2011 from 1st April to the end of the growing cycle, was 217 degrees•day higher than that in 2010. Water deficit significantly modified the vegetative growth and yield but, it did not modified bud fertility. The treatment with the highest water availability (T0,45-0,6) got the highest berry size, the lowest berry set rates were found in the severe continuous deficit treatment (T0-0,3). The plot studied in this trial was characterized by both excessive vigour and vegetative growth. Water deficit modified the pH must by, reducing it in the severe water deficit during pre-veraison (T0-0,6). There were not differences in wine tasting between the water deficits treatments. Regarding to the physical-chemical composition, it only existed differences in the L-malic acid concentration, resulting higher concentrations in the water deficit pre-veraison treatments: T0,45-0,6 y T0,45-0,3. Water deficit significantly modified wine colour by, increasing the CIELAB coordinates a* and b*, the brightness (L*), croma (C*) and tonality (H*), in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), and reducing them in the in the moderate continuous water deficit ones (T0,45-0,6). By means of traditional wine colour parameters analyses, red colour percentage, TPI, they became higher in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), than in those with higher availability (T0,45-0,6 y T0,45-0,3). At harvest, berry tannins concentrations was not affected by the water deficit although it did in a positive way, in the berry size. Berry tasting in 2011, resulted in a lower freshness, acidity, fruity, herbaceous flavour and tannic intensity, but with higher astringency respect to the 2010 season. Seeds, in 2011, were more astringent and aromatic as in the 2010, but less crunchy, without getting to the point of maturity. The taster linked the tannins to wine quality, associating them with a higher bodiest wine, acidity, intensity, taste balance, bitterness and with a lower astringency in the tasting stage. Treatments with a higher water deficit up to veraison T0-0,6 y T0-0,3 got less musts and wines potassium concentration. The relation between L-malic acid and the full red color percentage (dA(%)), were highly related, resulting the higher potassium content the lower wine quality.

Space-time analysis of the urban-rural grafient in the metropolitan area of Madrid and ist surroundings -Guadalajara and Toledo.

According to UN provisions in the period from 2007 to 2050 world population will grow up to 9200 million people. In fact, for the first time in history, in the year 2008 world urban population became higher than rural population. The increase of urban areas and their transport infrastructures has influenced agricultural land use due to their irreversible change, especially when they remain as periurban vacant land, losing their character and identity. In the Europe of the nineties, the traditional urban-rural gradient, characterized by a neat contact between both land types, has become so complex that it has change to a gradient in which it is difficult to separate urban and rural land uses. [Antrop 2004]. A literature review has been made on methodologies used for the urban-rural gradient analysis. One of these methodologies was selected that integrates ecological characterization based on the use of spatial metrics and geographical characterization based on spatial components. Cartographical sources used were Corine Land Cover at 1: 100000 scale and the Spanish Land Use Information System at 1:25000 scale. Urban-rural gradient paradigm is an analysis methodology, coming from landscape ecology, which enables to investigate how urbanization provokes changes in ecological patterns and processes into landscape. [Hahs and McDonnell 2006].The present research adapt this methodology to study the urban-rural gradient in the outskirts of Madrid, Toledo and Guadalajara. Both scales (1:25000 and 1:100000) were simultaneously used to reach the next objectives: 1) Analysis of landscape pattern dynamics in relation to distance to the town centre and major infrastructures. 2) Analysis of landscape pattern dynamics in the fringe of protected areas. The paper presents a new approach to the urban-rural relationship which allows better planning and management of urban áreas.

N-Management using Nitrification inhibitor DMPP to Reduce Nitrogen Oxide Emissions in Mediterranean Winter Barley.

Increasing nitrogen (N) use efficiency during crop production is paramount both from an economic and environmental perspective. A proposed measure to achieve it is to split the addition of fertilizers with more than on application. For a winter crop under Mediterranean climatic conditions, the most common application pattern consists of a basal fertilization (October-November) an a top-dressing (February-March).

Thermographic imaging: assessment of drought and heat tolerance in Spanish germplasm of Brachypodium distachyon.

The annual grass Brachypodium distachyon has been recently recognized as the model plant for functional genomics of temperate grasses, including cereals of economic relevance like wheat and barley. Sixty-two lines of B. distachyon were assessed for response to drought stress and heat tolerance. All these lines, except the reference genotype BD21, derive from specimens collected in 32 distinct locations of the Iberian Peninsula, covering a wide range of geo- climatic conditions. Sixteen lines of Brachypodium hybridum, an allotetraploid closely related to B. distachyon were used as reference of abiotic-stress well-adapted genotypes. Drought tolerance was assessed in a green-house trial. At the rosette-stage, no irrigation was applied to treated plants whereas their replicates at the control were maintained well watered during all the experiment. Thermographic images of treated and control plants were taken after 2 and 3 weeks of drought treatment, when stressed plants showed medium and extreme wilting symptoms. The mean leaf temperature of stressed (LTs) and control (LTc) plants was estimated based upon thermographic records from selected pixels (183 per image) that strictly correspond to leaf tissue. The response to drought was based on the analysis of two parameters: LTs and the thermal difference (TD) between stressed and control plants (LTs – LTc). The response to heat stress was based on LTc. Comparison of the mean values of these parameters showed that: 1) Genotypes better adapted to drought (B. hybridum lines) presented a higher LTs and TD than B. distachyon lines. 2) Under high temperature conditions, watered plants of B. hybridum lines maintained lower LTc than those of B. distachyon. Those results suggest that in these species adaptation to drought is linked to a more efficient stomata regulation: under water stress stomata are closed, increasing foliar temperature but also water use efficiency by reducing transpiration. With high temperature and water availability the results are less definite, but still seems that opening stomata allow plants to increase transpiration and therefore to diminish foliar temperature.

Soil moisture content determines the effect of the urease inhibitor NBPT on N2O emissions

Among the mitigation strategies to prevent nitrogen (N) losses from ureic fertilizers, urease inhibitors (UIs) have been demonstrated to promote high N use efficiency by reducing ammonia (NH3) volatilization. In the last few years, some field experiments have also shown its effectiveness in reducing nitrous oxide (N2O) losses from fertilized soils under conditions of low soil moisture. An incubation experiment was carried out with the aim of assessing the main biotic mechanisms behind N2O emissions once that the UIs N-(n-butyl) thiophosphoric triamid (NBPT) and phenil phosphorodiamidate (PPDA) were applied with Urea (U) under different soil moisture conditions (40, 60 and 80 % water-filled pore space, WFPS). In the same study we tried to analyze to what extent soil WFPS regulates the effect of these inhibitors on N2O emissions. The use of PPDA in our study allowed us to compare the effect of NBPT with that of another commercially available urease inhibitor, aiming to see if the results were inhibitor-specific or not. Based on the results from this experiment, a WFPS (i.e. 60 %) was chosen for a second study (i.e. mesocosm experiment) aiming to assess the efficiency of the UIs to indirectly affect N2O emissions through influencing the pool of soil mineral N. The N2O emissions at 40 % WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80 % WFPS. When compared to U alone, NBPT+U reduced the N2O emissions at 60 % WFPS but had no effect at 80 % WFPS. The application of PPDA significantly increased the emissions with respect to U at 80 % WFPS whereas no significant effect was found at 60 %. At 80 % WFPS, denitrification was the main source of N2O emissions for all treatments. In the mesocosm study, the application of NBPT+U was an effective strategy to reduce N2O emissions (75 % reduction compared to U alone), due to a lower soil ammonium (NH4 +) content induced by the inhibitor. These results suggest that adequate management of the UI NBPT could provide, under certain soil conditions, an opportunity for mitigation of N2O emissions from fertilized soils.

Comparison of micrometeorological techinques for estimating ammonia emission from covered slurry storage and land spreading of cattle slurry

The micrometeorological mass-balance integrated horizontal flux (IHF) technique has been commonly employed for measuring ammonia (NH3) emissions inon-field experiments. However, the inverse-dispersion modeling technique, such as the backward Lagrangian stochastic (bLS) modeling approach, is currently highlighted as offering flexibility in plot design and requiring a minimum number of samplers (Ro et al., 2013). The objective of this study was to make a comparison between the bLS technique with the IHF technique for estimating NH3 emission from flexible bag storage and following landspreading of dairy cattle slurry. Moreover, considering that NH3 emission in storage could have been non uniform, the effect on bLS estimates of a single point and multiple downwind concentration measurements was tested, as proposed by Sanz et al. (2010).

The NH3-Abating effect of Slurry Injection as Influenced by Soil Moisture in a Semiarid Arable Soil

Accumulation of large volumes of dilute slurries is considered one of the major problems related to intensive farming (Sommer et al., 2004). In the EU-27, more than half of the total N excretion is applied to croplands due to technical advantages for farmers (e.g. reuse of nutrients). However, the N use efficiency of slurries produced by livestock is low, i.e. only 20-52% of the excreted N is recovered by crops. Much of the remainder can be lost into the atmosphere as ammonia (NH3), nitrous oxide (N2O), dinitrogen (N2) and nitrogen oxides (NOx).

Ground and airborne level optical sensors: is it possible to estimate maize crop N status?

Adjusting N fertilizer application to crop requirements is a key issue to improve fertilizer efficiency, reducing unnecessary input costs to farmers and N environmental impact. Among the multiple soil and crop tests developed, optical sensors that detect crop N nutritional status may have a large potential to adjust N fertilizer recommendation (Samborski et al. 2009). Optical readings are rapid to take and non-destructive, they can be efficiently processed and combined to obtain indexes or indicators of crop status. However, other physiological stress conditions may interfere with the readings and detection of the best crop nutritional status indicators is not always and easy task. Comparison of different equipments and technologies might help to identify strengths and weakness of the application of optical sensors for N fertilizer recommendation. The aim of this study was to evaluate the potential of various ground-level optical sensors and narrow-band indices obtained from airborne hyperspectral images as tools for maize N fertilizer recommendations. Specific objectives were i) to determine which indices could detect differences in maize plants treated with different N fertilizer rates, and ii) to evaluate its ability to identify N-responsive from non-responsive sites.

Initializing the DSSAT-Century model: inverse calibration of carbon pools from apparent soil N mineralization

The CENTURY soil organic matter model was adapted for the DSSAT (Decision Support System for Agrotechnology Transfer), modular format in order to better simulate the dynamics of soil organic nutrient processes (Gijsman et al., 2002). The CENTURY model divides the soil organic carbon (SOC) into three hypothetical pools: microbial or active material (SOC1), intermediate (SOC2) and the largely inert and stable material (SOC3) (Jones et al., 2003). At the beginning of the simulation, CENTURY model needs a value of SOC3 per soil layer which can be estimated by the model (based on soil texture and management history) or given as an input. Then, the model assigns about 5% and 95% of the remaining SOC to SOC1 and SOC2, respectively. The model performance when simulating SOC and nitrogen (N) dynamics strongly depends on the initialization process. The common methods (e.g. Basso et al., 2011) to initialize SOC pools deal mostly with carbon (C) mineralization processes and less with N. Dynamics of SOM, SOC, and soil organic N are linked in the CENTURY-DSSAT model through the C/N ratio of decomposing material that determines either mineralization or immobilization of N (Gijsman et al., 2002). The aim of this study was to evaluate an alternative method to initialize the SOC pools in the DSSAT-CENTURY model from apparent soil N mineralization (Napmin) field measurements by using automatic inverse calibration (simulated annealing). The results were compared with the ones obtained by the iterative initialization procedure developed by Basso et al., 2011.

Economics of Wheat in Egypt

Este estudio pretende estimar la eficiencia y la productividad de las principales provincias de la producción de trigo en Egipto. Los datos utilizados en este estudio son datos de panel a nivel de provincias del período 1990-2012, obtenidos del Ministerio de Agricultura y Recuperación Tierras, y de la Agencia Central de Movilización Pública y Estadística, Egipto. Se aplica el enfoque de fronteras estocásticas para medir la eficiencia (función de producción de Cobb-Douglas) y se emplean las especificaciones de Battese y Coelli (1992) y (1995). También se utiliza el índice de Malmquist como una aproximación no paramétrica (Análisis de Envolvente de Datos) para descomponer la productividad total de los factores de las principales provincias productoras de trigo en Egipto en cambio técnico y cambio de eficiencia. El coeficiente de tierra es positivo y significativo en los dos especificaciones Battese y Coelli (1992) y (1995), lo que implica que aumentar la tierra para este cultivo aumentaría significativamente la producción de trigo. El coeficiente de trabajo es positivo y significativo en la especificación de Battese y Coelli (1992), mientras que es positivo y no significativo en la especificación de Battese y Coelli (1995). El coeficiente de la maquinaria es negativo y no significativo en las dos especificaciones de Battese y Coelli (1992) y (1995). El coeficiente de cambio técnico es positivo y no significativo en la especificación de Battese y Coelli (1992), mientras que es positiva y significativo en la especificación de Battese y Coelli (1995). Las variables de efectos del modelo de ineficiencia Battese y Coelli (1995) indican que no existe impacto de las diferentes provincias en la producción de trigo en Egipto; la ineficiencia técnica de la producción de trigo tendió a disminuir durante el período de estudio; y no hay ningún impacto de género en la producción de trigo en Egipto. Los niveles de eficiencia técnica varían entre las diferentes provincias para las especificaciones de Battese y Coelli (1992) y (1995); el nivel mínimo medio de eficiencia técnica es 91.61% en la provincia de Fayoum, mientras que el nivel máximo medio de la eficiencia técnica es 98.69% en la provincia de Dakahlia. La eficiencia técnica toma un valor medio de 95.37%, lo que implica poco potencial para mejorar la eficiencia de uso de recursos en la producción de trigo. La TFPCH de la producción de trigo en Egipto durante el período 1990-2012 tiene un valor menor que uno y muestra un declive. Esta disminución es debida más al componente de cambio técnico que al componente de cambio de eficiencia. La disminución de TFPCH mejora con el tiempo. La provincia de Menoufia tiene la menor disminución en TFPCH, 6.5%, mientras que dos provincias, Sharkia y Dakahlia, son las que más disminuyen en TFPCH, 13.1%, en cada uno de ellas. Menos disminución en TFPCH ocurre en el período 2009-2010, 0.3%, mientras que más disminución se produce en TFPCH en el período 1990-1991, 38.9%. La disminución de la PTF de la producción de trigo en Egipto se atribuye principalmente a la mala aplicación de la tecnología. ABSTRACT The objectives of this study are to estimate the efficiency and productivity of the main governorates of wheat production in Egypt. The data used in this study is a panel data at the governorates level, it represents the time period 1990-2012 and taken from the Ministry of Agriculture and Land Reclamation, and the Central Agency for Public Mobilization and Statistics, Egypt. We apply the stochastic frontier approach for efficiency measurement (Cobb-Douglas production function) and the specifications of Battese and Coelli (1992) and (1995) are employed. Also we use Malmquist TFP index as a non-parametric approach (DEA) to decompose total factor productivity of the main governorates of wheat production in Egypt into technical change and efficiency change. The coefficient of land is positive and significant at Battese and Coelli (1992) and (1995) specifications, implying that increasing the wheat area could significantly enhance the production of wheat. The coefficient of labor is positive and significant at Battese and Coelli (1992) specification, while it is positive and insignificant at Battese and Coelli (1995) specification. The coefficient of machinery is negative and insignificant at the specifications of Battese and Coelli (1992) and (1995). The technical change coefficient is positive and insignificant at Battese and Coelli (1992) specification, while it is positive and significant at Battese and Coelli (1995) specification. The variables of the inefficiency effect model indicate that there is no impact from the location of the different governorates on wheat production in Egypt, the technical inefficiency of wheat production tended to decrease through the period of study, and there is no impact from the gender on wheat production in Egypt. The levels of technical efficiency vary among the different governorates for the specifications of Battese and Coelli (1992) and (1995); the minimum mean level of technical efficiency is 91.61% at Fayoum governorate, while the maximum mean level of technical efficiency is 98.69% at Dakahlia governorate. The technical efficiency takes an average value of 95.37%, this implying that little potential exists to improve resource use efficiency in wheat production. The TFPCH of wheat production in Egypt during the time period 1990-2012 has a value less than one and shows a decline; this decline is due mainly to the technical change component than the efficiency change component. The decline in TFPCH is generally improves over time. Menoufia governorate has the least declining in TFPCH by 6.5%, while two governorates, Sharkia and Dakahlia have the most declining in TFPCH by 13.1% for each of them. The least declining in TFPCH occurred at the period 2009- 2010 by 0.3%, while the most declining in TFPCH occurred at the period 1990-1991 by 38.9%. The declining in TFP of wheat production in Egypt is attributed mainly to poor application of technology.

Metodología para la gestión integral de las presas de laminación de avenidas y su aplicación a la cuenca hidrográfica del Segura

En el levante español se producen periódicamente intensos aguaceros (gota fría), que generan grandes riadas, desbordándose los cauces y asolando los campos y las ciudades, ocasionando graves daños en la economía local y con frecuencia, por desgracia, víctimas personales. La Confederación Hidrográfica del Segura ha puesto en marcha un vasto sistema de protección, conocido como Plan de Defensa contra Avenidas, del que ya se encuentran en explotación un conjunto de presas cuyo objetivo prioritario es la laminación de las avenidas. Las presas de laminación ubicadas en esta área mediterránea son estructuras muy singulares, al estar ubicadas en cuencas extremadamente secas, con alta pendiente, rápida respuesta, picos altos de caudal, y gran poder erosivo del flujo. Las aguas arrastran en suspensión un alto porcentaje de aporte sólido y flotantes, que quedan retenidos en el embalse, aterrándolo e inutilizando los desagües. En esta tesis doctoral se analizan los criterios de actuación para la gestión de estas presas de laminación, con objeto de que se puedan introducir en las Normas de Explotación innovaciones destinadas a mejorar la eficiencia del conjunto, de manera que se consiga la máxima protección posible y al mismo tiempo se puedan aprovechar las aguas, sin menoscabo de su objetivo prioritario, para otros fines complementarios. Como consecuencia del trabajo realizado se indica la conveniencia de establecer un conjunto de normas de actuación comunes a todas las presas del sistema, como es la estrategia de recibir siempre a los hidrogramas de la riada con las compuertas de los desagües de fondo cerrados, o la conveniencia de que en todas las presas se dispongan compuertas en estos órganos. También se dictan recomendaciones en la gestión del vaciado, para conseguir el máximo aprovechamiento del agua, introduciendo el concepto innovador de los trasvases virtuales. Asimismo, se analiza la conveniencia de fijar normas diferenciales específicas atendiendo a las peculiaridades de cada presa, en cuanto se refiere al nivel máximo de explotación, al cumplimiento de los condicionantes ambientales, al mantenimiento de la calidad del agua, y a otros aspectos singulares que caracterizan a cada uno de estos embalses. The Spanish Mediterranean region hydrology is characterised by low rainfall, but concentrated in extreme convective events. Those heavy rains and storms lead to large, flash-floods which cause devastation of fields, villages and, unfortunately, loss of lives. Segura River Basin Authority has developed an ambitious plan for flood protection and control that is constituted by a system of flood protection dams, river channelling, river diversions diversions and levees. Flood protection dams placed on this area, are distinct structures, as they are located on extremely dry basins, with high slopes and limited vegetal covering. These facts, along with the very high rainfall intensity, are determinants of a rapid response and a very erosive flow. The flow transports a large rate of solids in suspension, and also debris, which many times block and clog the outlets intakes, disabling them. In such a case, the dam would be inoperative, in an emergency state and remedial measures should be taken. This PhD thesis analyses the flood protection dams operation criteria, for providing managers a methodology to analyse each individual case and also the flood protection system as a whole. Additionally practical rules and recommendations, to cope with the objectives of dam safety, flood protection and water resources use, are given. The rules consider the specific differences and risks that may be faced by the dams. To that end, they were grouped, depending on their characteristics: allowance for permanent water storage, environmental restrictions, water quality, geotechnical problems, type of structure, etc. As a result of this research, it is recommended to design these dams with valves for regulating the bottom outlets. The availability of valves is linked with the routing strategy of receiving flood with the outlets closed. This has been shown as the best measure to prevent clogging and opens the possibility of storing temporarily the water, making then a scheduled emptying of the reservoir, which could be computed as a virtual transfer to the regulating dams. Emptying should be done in accordance with the situation of the other dams of the system and of the rivers downstream. This detention time would make possible also the beginning of the sedimentation process which is necessary for using the water with the modern irrigation systems that are in use in this area.