31 resultados para VM Naval architecture. Shipbuilding. Marine engineering
Resumo:
This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large enough to face the modeling of any type of ship. The second one is a design language dedicated to create the product model. The main purpose of the language is to publish the modeling algorithms of the application in the designer knowledge domain to let the designer create parametric model scripts. The programmed design is an evolution of the parametric design but it is not just parametric design. It is a tool to create parametric design tools. It provides a methodology to extract the design knowledge by abstracting a design experience in order to store and reuse it. Programmed design is related with the organizational and architectural aspects of the CAD applications but not with the development of modeling algorithms. It is built on top and relies on existing algorithms provided by a comprehensive product model. Programmed design can be useful to develop new applications, to support the evolution of existing applications or even to integrate different types of application in a single one. A three-level software architecture is proposed to make the implementation of the programmed design easier. These levels are the conceptual level based on the design language, the mathematical level based on the geometric formulation of the product model and the visual level based on the polyhedral representation of the model as required by the graphic card. Finally, some scenarios of the use of programmed design are discussed. For instance, the development of specialized parametric hull form generators for a ship type or a family of ships or the creation of palettes of hull form components to be used as parametric design patterns. Also two new processes of reverse engineering which can considerably improve the application have been detected: the creation of the mathematical level from the visual level and the creation of the conceptual level from the mathematical level. © 2012 Elsevier Ltd. All rights reserved. 1. Introduction
Resumo:
El presente Proyecto de Fin de Carrera supone el propósito conjunto de los alumnos Álvaro Morillas y Fernando Sáez, y del profesor Vladimir Ulin, de desarrollar una unidad didáctica sobre el programa de simulación para ingeniería Virtual.Lab. La versión sobre la que se ha trabajado para realizar este texto es la 11, publicada en agosto de 2012. Virtual.Lab, del fabricante belga LMS International, es una plataforma software de ingeniería asistida por ordenador, que agrupa en una misma aplicación varias herramientas complementarias en el diseño de un producto, desde su definición geométrica a los análisis de durabilidad, ruido u optimización. No obstante, de entre todas las posibles simulaciones que nos permite el programa, en este proyecto sólo se tratan las que están relacionadas con la acústica. Cabe resaltar que gran parte de los conceptos manejados en Virtual.Lab son compatibles con el programa CATIA V5, ya que ambos programas vienen instalados y funcionan conjuntamente. Por eso, el lector de este proyecto podrá transportar sus conocimientos al que es uno de los programas estándar en las industrias aeronáutica, naval y automovilística, entre otras. Antes de este proyecto, otros alumnos de la escuela también realizaron proyectos de fin de carrera en el campo de la simulación computarizada en acústica. Una característica común a estos trabajos es que era necesario hacer uso de distintos programas para cada una de las etapas de simulación (como por ejemplo, ANSYS para el modelado y estudio de la vibración y SYSNOISE para las simulaciones acústicas, además de otros programas auxiliares para las traducciones de formato). Con Virtual.Lab desaparece esta necesidad y el tiempo empleado se reduce. Debido a que las soluciones por ordenador están ganando cada vez más importancia en la industria actual, los responsables de este proyecto consideran la necesidad de formación de profesionales en esta rama. Para responder a la demanda empresarial de trabajadores cualificados, se espera que en los próximos años los planes de estudio contengan más cursos en esta materia. Por tanto la intención de los autores es que este material sea de utilidad para el aprendizaje y docencia de estas asignaturas en cursos sucesivos. Por todo esto, se justifica la relevancia de este PFC como manual para introducir a los alumnos interesados en iniciarse en un sistema actual, de uso extendido en otras universidades tecnológicas europeas, y con buenas perspectivas de futuro. En este proyecto se incluyen varios ejemplos ejecutables desde el programa, así como vídeos explicativos que ayudan a mostrar gráficamente los procesos de simulación. Estos archivos se pueden encontrar en el CD adjunto. Abstract This final thesis is a joint project made by the students Álvaro Morillas and Fernando Sáez, and the professor Vladimir Ulin. The nature of the joint regards the writing of a didactic unit on Virtual.Lab, the simulation software. The software version used in this text is the number 11, released in August 2012. Virtual.Lab, from the Belgian developer LMS International, is a computer-aided engineering software which is used for several related tasks in this field: product design, durability simulation, optimization, etc. However, this project is focused on the acoustical capabilities. It is worthy to highlight that most procedures explained in this text can be used in the software CATIA V5 as well. Both tools come installed together and may be used at the same time. Therefore, the reader of this project will be able to use the acquired knowledge in one of the most relevant softwares for the aerospace, marine and automotive engineering. Previously to the development of this project, this School has conducted projects on this field. These projects regarded the use of ANSYS for modeling and meshing stages as well as the use of SYSNOISE for the final acoustic analysis. Since both systems use different file formats, a third-party translation software was required. This thesis fulfill this pending necessity with Virtual.Lab; the translation software procedure is not necessary anymore and simulations can be done in a more flexible, fast way. Since companies have an increasing usage of numerical methods in the development of their products and services, the authors think that it is important to develop the appropriate method to instruct new professionals in the field. Thus, the aim of this project is to help teachers and students in their process of learning the use of this leading software in acoustical simulations. For all the reasons mentioned above, we consider that this project is relevant for the School and the educational community. Aiming to achieve this objective the author offers example files and video demonstrations with guidance in the CD that accompanies this material. This facilitates the comprehension of the practical tasks and guides the prospect users of the software.
Resumo:
El proceso de soldadura por láser desarrollado en los últimos años ha puesto de manifiesto las posibilidades de aplicación de esta tecnología en diferentes sectores productivos, principalmente en la industria automovilística, en la cual se han demostrado sus ventajas en términos de productividad, eficiencia y calidad. El uso de la tecnología láser, ya sea híbrida o pura, reduce el input térmico al limitar la zona afectada por el calor, sin crear deformaciones y, por tanto, disminuye los re-trabajos post-soldadura necesarios para eliminarlas. Asimismo, se aumenta la velocidad de soldadura, incrementando la productividad y calidad de las uniones. En la última década, el uso de láseres híbridos, (láser + arco) de gran potencia de Neodimio YAG, (Nd: YAG) ha sido cada vez más importante. La instalación de este tipo de fuentes de láser sólido de gran potencia ha sido posible en construcción naval debido a sus ventajas con respecto a las instalaciones de láser de C02 existentes en los astilleros que actualmente utilizan esta tecnología. Los láseres de C02 están caracterizados por su gran potencia y la transmisión del haz a través de espejos. En el caso de las fuentes de Nd:YAG, debido a la longitud de onda a la cual se genera el haz láser, su transmisión pueden ser realizada a través de fibra óptica , haciendo posible la utilización del cabezal láser a gran distancia de la fuente, aparte de la alternativa de integrar el cabezal en unidades robotizadas. El proceso láser distribuye el calor aportado de manera uniforme. Las características mecánicas de dichas uniones ponen de manifiesto la adecuación de la soldadura por láser para su uso en construcción naval, cumpliendo los requerimientos exigidos por las Sociedades de Clasificación. La eficiencia energética de los láseres de C02, con porcentajes superiores al 20%, aparte de las ya estudiadas técnicas de su instalación constituyen las razones por las cuales este tipo de láser es el más usado en el ámbito industrial. El láser de gran potencia de Nd: YAG está presente en el mercado desde hace poco tiempo, y por tanto, su precio es relativamente mayor que el de C02, siendo sus costes de mantenimiento, tanto de lámparas como de diodos necesarios para el bombeo del sólido, igualmente mayores que en el caso del C02. En cambio, el efecto de absorción de parte de la energía en el plasma generado durante el proceso no se produce en el caso del láser de Nd: YAG, utilizando parte de esa energía en estabilizar el arco, siendo necesaria menos potencia de la fuente, reduciendo el coste de la inversión. En función de la aplicación industrial, se deberá realizar el análisis de viabilidad económica correspondiente. Dependiendo de la potencia de la fuente y del tipo de láser utilizado, y por tanto de la longitud de onda a la que se propaga la radiación electromagnética, pueden existen riesgos para la salud. El láser de neodimio se propaga en una longitud de onda, relativamente cercana al rango visible, en la cual se pueden producir daños en los ojos de los operadores. Se deberán establecer las medidas preventivas para evitar los riesgos a los que están expuestos dichos operadores en la utilización de este tipo de energía. La utilización del láser de neodimio: YAG ofrece posibilidades de utilización en construcción naval económicamente rentables, debido su productividad y las buenas características mecánicas de las uniones. Abstract The laser welding process development of the last years shows broad application possibilities in many sectors of industry, mostly in automobile production. The advantages of the laser beam process produce higher productivity, increasing the quality and thermal efficiency. Laser technology, arc-hybrid or pure laser welding, reduces thermal input and thus a smaller heat-affected zone at the work piece. This means less weldment distortion which reduces the amount of subsequent post-weld straightening work that needs to be done. A higher welding speed is achieved by use of the arc and the laser beam, increasing productivity and quality of the joining process. In the last decade use of hybrid technology (laser-GMA hybrid method) with high power sources Nd:YAG lasers, gained in importance. The installation of this type of higher power solid state laser is possible in shipbuilding industrial applications due to its advantages compare with the C02 laser sources installed in the shipyards which use this technology. C02 lasers are characterised by high power output and its beam guidance is via inelastic system of mirrors. In the case of Nd:YAG laser, due to its wavelength, the laser beam can be led by means of a flexible optical fibre even across large distances, which allows three dimensional welding jobs by using of robots. Laser beam welding is a process during which the heat is transferred to the welded material uniformly and the features of the process fulfilled the requirements by Classification Societies. So that, its application to the shipbuilding industry should be possible. The high quantum efficiency of C02 laser, which enabled efficiency factors up to 20%, and relative simple technical possibilities of implementation are the reasons for the fact that it is the most important laser in industrial material machining. High power Nd: YAG laser is established on the market since short time, so that its price is relatively high compared with the C02 laser source and its maintenance cost, lamp or diode pumped solid state laser, is also higher than in the case of C02 lasers. Nevertheless effect of plasma shielding does not exist with Nd:YAG lasers, so that for the gas-shielding welding process the optimal gases can be used regarding arc stability, thus power source are saved and the costs can be optimised. Each industrial application carried out needs its cost efficiency analysis. Depending on the power output and laser type, the dangerousness of reflected irradiation, which even in some meters distance, affects for the healthy operators. For the YAG laser process safety arrangements must be set up in order to avoid the laser radiation being absorbed by the human eye. Due to its wavelength of radiation, being relatively close to the visible range, severe damage to the retina of the eye is possible if sufficient precautions are not taken. Safety aspects are of vital importance to be able to shield the operator as well as other personal. The use of Nd:YAG lasers offers interesting and economically attractive applications in shipbuilding industry. Higher joining rates are possible, and very good mechanical/technological parameters can be achieved.
Resumo:
Software Product Line Engineering has significant advantages in family-based software development. The common and variable structure for all products of a family is defined through a Product-Line Architecture (PLA) that consists of a common set of reusable components and connectors which can be configured to build the different products. The design of PLA requires solutions for capturing such configuration (variability). The Flexible-PLA Model is a solution that supports the specification of external variability of the PLA configuration, as well as internal variability of components. However, a complete support for product-line development requires translating architecture specifications into code. This complex task needs automation to avoid human error. Since Model-Driven Development allows automatic code generation from models, this paper presents a solution to automatically generate AspectJ code from Flexible-PLA models previously configured to derive specific products. This solution is supported by a modeling framework and validated in a software factory.
Resumo:
Nowadays, Software Product Line (SPL) engineering [1] has been widely-adopted in software development due to the significant improvements that has provided, such as reducing cost and time-to-market and providing flexibility to respond to planned changes [2]. SPL takes advantage of common features among the products of a family through the systematic reuse of the core-assets and the effective management of variabilities across the products. SPL features are realized at the architectural level in product-line architecture (PLA) models. Therefore, suitable modeling and specification techniques are required to model variability. In fact, architectural variability modeling has become a challenge for SPLE due to the fact that PLA modeling requires not only modeling variability at the level of the external architecture configuration (see [3,4] literature reviews), but also at the level of internal specification of components [5]. In addition, PLA modeling requires preserving the traceability between features and PLAs. Finally, it is important to take into account that PLA modeling should guide architects in modeling the PLA core assets and variability, and in deriving the customized products. To deal with these needs, we present in this demonstration the FPLA Modeling Framework.
Resumo:
People in industrial societies carry more and more portable electronic devices (e.g., smartphone or console) with some kind of wireles connectivity support. Interaction with auto-discovered target devices present in the environment (e.g., the air conditioning of a hotel) is not so easy since devices may provide inaccessible user interfaces (e.g., in a foreign language that the user cannot understand). Scalability for multiple concurrent users and response times are still problems in this domain. In this paper, we assess an interoperable architecture, which enables interaction between people with some kind of special need and their environment. The assessment, based on performance patterns and antipatterns, tries to detect performance issues and also tries to enhance the architecture design for improving system performance. As a result of the assessment, the initial design changed substantially. We refactorized the design according to the Fast Path pattern and The Ramp antipattern. Moreover, resources were correctly allocated. Finally, the required response time was fulfilled in all system scenarios. For a specific scenario, response time was reduced from 60 seconds to less than 6 seconds.
Resumo:
Solar Decathlon Europe is an international competition among universities which promotes interdisciplinary learning in engineering and architecture. Students from different disciplines participate in teams guided by several professors during a 29 month preparation period plus five weeks of on-site contest. The educational project involves designing, building and testing a solar energy house connected to the electrical grid with the strategy of maximizing self-consumption, supported by bioclimatic technologies and maintaining a low environmental footprint. It culminates in a on-site contest in which teams must assembly the house themselves, test it with ordinary real life tasks and finally disassembly it. The event has also a divulgative aim, trying to make students and visitors get interested in discovering the problems presented by real engineering and architecture applications. In addition, SDE covers R&D aspects in different fields such as energy efficiency, solar energy and bioclimatic architecture. This article presents the methodology followed during the SDE 2012 edition, in which more than 850 students participated. The obtained results show that the educational competition was a success according to the technical and professional ambitions of the students, most of them considering that their knowledge had increased in areas related to technical and multidisciplinary aspects.
Resumo:
This paper focuses on the implementation of fuel cells in marine systems as a propulsion system and energy source. The objective is to provide an overview of the pertinent legislation for marine applications of fuel cells. This work includes a characterization of some guidelines for the safe application of fuel cell systems on ships. It also describes two ships that have implemented fuel cells to obtain energy, the Viking Lady, the first marine ship to include this technology, and Greentug, a reference for new tugs
Resumo:
Nowadays, organizations have plenty of data stored in DB databases, which contain invaluable information. Decision Support Systems DSS provide the support needed to manage this information and planning médium and long-term ?the modus operandi? of these organizations. Despite the growing importance of these systems, most proposals do not include its total evelopment, mostly limiting itself on the development of isolated parts, which often have serious integration problems. Hence, methodologies that include models and processes that consider every factor are necessary. This paper will try to fill this void as it proposes an approach for developing spatial DSS driven by the development of their associated Data Warehouse DW, without forgetting its other components. To the end of framing the proposal different Engineering Software focus (The Software Engineering Process and Model Driven Architecture) are used, and coupling with the DB development methodology, (and both of them adapted to DW peculiarities). Finally, an example illustrates the proposal.
Resumo:
The purpose of this paper is to expose the importance of observing cultural systems present in a territory as a reference for the design of urban infrastructures in the new cities and regions of rapid development. If we accept the idea that architecture is an instrument or cultural system developed by man to act as an intermediary to the environment, it is necessary to understand the elemental interaction between man and his environment to meet a satisfactory design. To illustrate this purpose, we present the case of the Eurasian Mediterranean region, where the architectural culture acts as a cultural system of adaptation to the environment and it is formed by an ancient process of selection. From simple observation of architectural types, construction systems and environmental mechanisms treasured in mediterranean historical heritage we can extract crucial information about this elemental interaction. Mediterranean architectural culture has environmental mechanisms responding to the needs of basics habitability, ethnics and passive conditioning. These mechanisms can be basis of an innovative design without compromising the diversity and lifestyles of human groups in the region. The main fundament of our investigation is the determination of the historical heritage of domestic architecture as holder of the formation process of these mechanisms. The result allows us to affirm that the successful introduction of new urban infrastructures in an area need a reliable reference and it must be a cultural system that entailing in essence the environmental conditioning of human existence. The urban infrastructures must be sustainable, understood and accepted by the inhabitants. The last condition is more important when the urban infrastructures are implemented in areas that are developing rapidly or when there is no architectural culture.
Resumo:
Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.
Resumo:
El motivo de abordar esta Tesis responde al hecho personal de haber vivido históricamente momentos cumbre de la Construcción Naval en España y no dejar de plantearme, a pesar de mi distancia del sector desde el punto de vista profesional, en las opciones de futuro para volver a ser competitivos en un sector que ha tenido un peso tan importante en la economía española, y que tanto ha ilusionado a centenares de profesionales y compañeros a lo largo de muchas décadas con el optimismo de estar aportando valor para que España fuera competitiva. A lo largo de los últimos años, y la relación con el ámbito de la dirección de Empresas desde el punto de vista de una Escuela de Negocios, así como el contacto con enfoques estratégicos en sectores muy diversos me animó a plantearme la Tesis con el objetivo de reflejar el estado actual del sector y poder valorar alternativas de futuro para la Construcción Naval española, aun sabiendo que son muchos los “maestros” realmente autorizados en nuestros país, con amplios conocimientos y experiencia, que muchas veces, a pesar de las propuestas y de los esfuerzos que han realizado para impulsar el sector, se han encontrado con situaciones adversas, bien de tipo económico, social‐laboral, político ‐a nivel nacional, europeo o global‐, etc., que han impedido un fortalecimiento del sector como todos hubiéramos deseado. La presión histórica ejercida por los países competidores en Construcción naval del ámbito asiático y lejano oriente, así como los compromisos derivados de las Directivas europeas, han obligado al sector de la Construcción Naval en España a buscar unos nuevos posicionamientos estratégicos presentes y, sobre todo, de futuro. Partiendo de un análisis del sector naval, tanto del mercado nacional como del internacional, con especial foco en los países líderes, se plantea investigar, siguiendo el modelo de Porter, las fuerzas competitivas que han influido en estas últimas décadas y que han conducido a la situación actual, valorando la estructura competitiva, el entorno relevante y los efectos de la globalización, con las amenazas de los nuevos y actuales competidores y las barreras existentes. Para abordar esta investigación se ha realizado un análisis del sector naval con la siguiente metodología: 1. Análisis del estado actual de la construcción naval en España. 2. Análisis del estado actual de la construcción naval en el mundo. 3. Estudio de la demanda en el mercado y evolución de la misma en los últimos años: muy centrada en los países líderes y más competitivos. 4. Estudio de las perspectivas de negocio en el sector marítimo y oceánico: estudio particular del transporte marítimo y una comparativa con la explotación de recursos oceánicos. Finalmente se decidió no abordar por falta de datos de futuro las construcciones militares. 5. Estudio de características de la industria naval española y capacidad de los astilleros. Se ha focalizado especialmente en la construcción para valorar la capacidad de futuro. 6. Análisis de fuerzas competitivas de la industria naval española a partir del modelo de Porter. En esta parte se incluyen alguno de los factores críticos externos e internos que ayudan a identificar barreras y estrategias en el entorno de la construcción naval como sector global. 7. Identificación de las oportunidades de negocio hacia el 2050. 8. Alternativas para una estrategia competitiva de actuación frente a las oportunidades de futuro en el 2050. Con esta Tesis se aporta un estudio competitivo actualizado, de acuerdo con el modelo de Porter, con el fin de proponer una posible estrategia competitiva de futuro, que posicione competitivamente la industria naval y el sector marítimo en España en las próximas décadas. ABSTRACT The reason for addressing this thesis responds to my personal experience about having lived historical moments summit Shipbuilding in Spain. Despite my distance from this industry from a professional point of view, I have never stopped wonder myself which are the options for the future to become competitive in an industry that has had such an important weight in the Spanish economy, which has excited so hundreds of professionals and peers through many decades with optimism to be adding value to Spain in order to be competitive again. Over recent years, and the relationship with the field of business management from the point of view of a business school, as well as contact with strategic approaches in diverse sectors encouraged me to wonder Thesis order to reflect the current state of the sector and to evaluate future alternatives for the Spanish Shipbuilding, knowing that many "teachers" really allowed in our country, with extensive knowledge and experience that often, despite proposals and the efforts that have been made to boost the sector, have met with adverse situations, whether economic, social and labor, political kind ‐at national, European or global‐level, etc., that have prevented a strengthening of all sectors we wished. The historical pressure from competing countries in Shipbuilding Asian area and Far East, as well as commitments arising from EU directives, have forced the shipbuilding industry in Spain to seek a new strategic positions present and, above all, future. Starting from an analysis of the shipbuilding sector, both national and international market, with special focus on the leading countries, we propose to investigate, following the model of Porter, the competitive forces that have influenced recent decades and have led to the current situation, assessing the competitive structure of the relevant environment and the effects of globalization, with the threat of new and existing competitors and barriers. To address this research has analyzed the naval sector with the following methodology: 1. Analysis of the current state of shipbuilding in Spain. 2. Analysis of the current state of shipbuilding in the world. 3. Study of the demand in the market and evolution of the same in recent years: very focused on the leading and most competitive countries. 4. Study of business prospects in the maritime and oceanic sector: private study of maritime transport and a comparison with the exploitation of ocean resources. Finally it was decided not to address a lack of data future military construction. 5. Study of characteristics of the Spanish shipbuilding and shipyard capacity. It is particularly focused on building the capacity to assess future. 6. Analysis of competitive forces of the Spanish shipbuilding industry from the model of Porter. In this part they include some critics of the external and internal factors that help identify barriers and strategies in the environment of global shipbuilding sector. 7. Identification of business opportunities by 2050. 8. Alternatives to a competitive strategy of action against future opportunities in 2050. This thesis has sought to provide a competitive study updated according to Porter's model, in order to propose a possible future competitive strategy to reach a competitive position at the shipbuilding industry and the maritime sector in Spain in the coming decades. The historical pressure from competing countries in the Asian sphere Shipbuilding and Far East, as well as commitments arising from EU directives have forced the shipbuilding industry in Spain to seek a new strategic positioning. Starting from an analysis of the shipbuilding sector, both national and international market, with a special focus on the leading countries, it is proposed to analyze, following the model of Porter, the competitive forces that have influenced in recent decades and have led to the current situation, studying the competitive structure of the relevant environment and the effects of globalization, with the threat of new and existing competitors and barriers. It concludes with a forecast of future market and business opportunities arising in the global environment of maritime and naval Industry, in order to propose a possible competitive strategy for the near future, which could help to achieve a competitive position on the shipbuilding and maritime sector in Spain for the coming decades.
Resumo:
Uno de los aspectos más complicados del diseño de sistemas HVAC en buques es la correcta evaluación de las necesidades de aire fresco y el correcto dimensionado de los conductos que suministran dicho aire y evacuan el calor generado a bordo. Contrariamente a lo que sucede en los sistemas de tuberías, las características particulares del caudal de aire hacen que el dimensionado de los conductos sea muy sensible al trazado y geometría de los mismos, por lo que para obtener un buen diseño es necesaria una relación muy estrecha y una integración bidireccional entre los cálculos y el trazado de los propios conductos en el buque. Asumida la utilización de sistemas CAD/CAM para las tareas de diseño, históricamente, aquellos que permitían modelar conductos HVAC no incluían en su alcance de suministro los aspectos de cálculo, y como consecuencia de ello, el trazado de conductos se reducía a la inclusión en el modelo 3D de circuitos y sistemas previamente calculados y dimensionados, Así, servían únicamente para calcular interferencias con otros elementos del modelo 3D y para obtener posteriormente planos de fabricación y montaje. Esto, que por sí no es poco, dejaba el diseño de sistemas HVAC pendiente de una importante interacción manual y de habituales retrabajos, ya que cualquier modificación en el trazado de los conductos, consecuencia de otras necesidades del diseño, obligaba a los diseñadores a recalcular y redimensionar los conductos en un entorno diferente al del propio sistema CAD/CAM, y volver a realizar el modelado de los mismos, reduciendo significativamente las ventajas de la utilización de un modelo 3D. Partiendo de esta situación real, y con objeto de solucionar el problema que para el diseño y la propia producción del buque se creaba, se concibió una herramienta que permitiera la definición en el modelo 3D de diagramas de ventilación, el cálculo de pérdidas de presión, el dimensionado automático de los conductos, y que toda esta información pudiera estar disponible y reutilizarse en las etapas posteriores del diseño. Con ello, los diseñadores podrían realizar su trabajo en un entorno único, totalmente integrado con el resto de disciplinas. El objeto de esta Tesis Doctoral es analizar en detalle el problema y las ineficiencias actuales del diseño de HVAC, describir la innovadora herramienta concebida para paliar estas ineficiencias, detallando las bases sobre la que se construye, y destacar las ventajas que se obtienen de su uso. La herramienta en cuestión fue concebida como una funcionalidad adicional del sistema CAD/CAM naval FORAN, referente tecnológico en el mundo del diseño y la construcción navales, y como consecuencia de ellos se llevó a cabo el desarrollo correspondiente. En la actualidad, el sistema FORAN incluye en su alcance de suministro una primera versión de esta herramienta, cuya utilidad queda avalada por el uso que de la misma hacen astilleros y oficinas técnicas en todo el mundo. Esta Tesis Doctoral es eminentemente práctica. No es un estudio teórico de dudosa aplicación, sino que tiene por objeto aportar una solución eficiente a un problema real que muchos astilleros y oficinas técnicas, incluidas los más avanzados, padecen hoy en día. No tiene otra motivación que servir de ayuda para lograr diseñar y construir mejores barcos, en un plazo más corto, y a un coste menor. Nada más, pero nada menos. ABSTRACT One of the most complicated aspects of the design of HVAC systems in shipbuilding is the correct evaluation of the fresh air needs, the correct balancing of the ducts that supply this air and evacuate the existing heat on board. In opposition to piping systems, due to the particular characteristics of the air flow, the balancing of the ducts is very sensitive to the routing and the aspect of the ducts, so the correct design requires a close interconnectivity between calculations and routing. Already assumed the use of CAD/CAM systems for design tasks, historically, those CAD/CAM systems capable of modelling HVAC ducts did not cover calculation aspects, with the result that the routing of HVAC ducts was reduced solely to the input of previously balanced circuits into the 3D Product Model for the purpose of interference checking and generation of fabrication and assembly drawings. This situation, not negligible at all, put the design of HVAC ducts very dependent on manual operations and common rework task, as any modification in the routing of the HVAC ducts, derived from design needs, obliged engineers to re-balance the ducts and eventually to re-size them independently of the CAD-CAM environment, thus annulling the advantages of the 3D Product Model. With this situation in mind, and with the objective of filling the gap created in the design and construction of the ship, it was conceived a tool allowing the definition, within the 3D Product model, of HVAC diagrams, the calculation of pressure drops, the automatic dimensioning of ducts. With this, engineers could make the complete HVAC design in a single working environment, fully integrated with the rest of the disciplines. The present Ph. D. thesis analyses in deep the existing problem and the current lack of efficiency in HVAC design, describes the innovative tool conceived to minimize it, details the basis on which the tool is built, and highlights the advantages of its use. This tool was conceived as an additional functionality of the marine CAD/CAM system FORAN, a technological reference in the shipdesign and shipbuilding industry. As a consequence, it was developed, and nowadays FORAN System includes in its scope of supply a first version of the tool, with its usefulness endorsed by the fact that it is used by shipyards and shipdesign offices all over the world. This Ph. D. thesis is on top everything, of practical nature. It is not a theoretical study with doubtful application. On the contrary, its objective is to provide with an efficient solution for solving a real problem that many shipyards and shipdesign offices, including those more advanced, suffer nowadays. It has no other motivation that to help in the process of designing and building better and cheaper ships, within a shorter deliver time. Nothing more, but nothing less.
Resumo:
El impacto ambiental directo de la construcción naval, que se refiere a la construcción, mantenimiento y reparación de buques, no es de ninguna manera pequeño. La construcción de buques depende de un gran número de procesos que por sí mismos constituyen un riesgo significativo de daño medio ambiental en el entorno de los astilleros y que conducen a emisiones significativas de gases de efecto invernadero. Además, la construcción naval utiliza algunos materiales que no sólo puede llevar a graves consecuencias para el daño ambiental durante su producción y su uso en el proceso de construcción de la nave, sino también posteriormente durante la reparación de buques, el funcionamiento y las actividades de reciclaje. (OECD 2010) El impacto ambiental directo de la construcción naval constituye de por sí, un desafío importante para la industria. Pero este impacto no queda limitado a su entorno inmediato, aunque la Construcción Naval no es directamente responsable de la repercusión en el medio ambiente de la operación y el reciclaje de buques comerciales, si es una parte integral de estas actividades. (OECD 2010) En esta tesis se sugiere que el sector de la construcción naval puede y debe aceptar sus responsabilidades ambientales no solo en el entorno del astillero; también en la operación de los buques, sus productos; tomando conciencia, a través de un enfoque de ciclo de vida, del desempeño ambiental de la industria en su conjunto. Es necesario intensificar esfuerzos a medida que el impacto ambiental de la industria es cada vez más visible en el dominio público, en pro de un crecimiento verde que permita aumentar la capacidad de actividad o producción económica al tiempo que reduce o elimina, los impactos ambientales. Este será un imperativo para cualquier futura actividad industrial y exigirá naturalmente conocimiento ambiental intrincado perteneciente a todos los procesos asociados. Esta tesis - aprovechando como valiosa fuente de información los desarrollos y resultados del proyecto europeo: “Eco_REFITEC”. FP7-CP-266268, coordinado por el autor de esta Tesis, en nombre de la Fundación Centro Tecnológico SOERMAR - tiene como primer objetivo Investigar la interpretación del concepto de Construcción Naval y Transporte Marítimo sostenible así como las oportunidades y dificultades de aplicación en el sector de la Construcción y reparación Naval. Ello para crear o aumentar el entendimiento de la interpretación del concepto de transporte marítimo sostenible y la experiencia de su aplicación en particular en los astilleros de nuevas construcciones y reparación. Pretende también contribuir a una mejor comprensión de la industria Marítima y su impacto en relación con el cambio climático, y ayudar en la identificación de áreas para la mejora del desempeño ambiental más allá de las operaciones propias de los astilleros; arrojando luz sobre cómo puede contribuir la construcción naval en la mejora de la eficiencia y en la reducción de emisiones de CO2 en el transporte marítimo. Se espera con este enfoque ayudar a que la Industria de Construcción Naval vaya abandonando su perspectiva tradicional de solo mirar a sus propias actividades para adoptar una visión más amplia tomando conciencia en cuanto a cómo sus decisiones pueden afectar posteriormente las actividades aguas abajo, y sus impactos en el medio ambiente, el cambio climático y el crecimiento verde. Si bien cada capítulo de la tesis posee su temática propia y una sistemática específica, a su vez retoma desde una nueva perspectiva cuestiones importantes abordadas en otros capítulos. Esto ocurre especialmente con algunos ejes que atraviesan toda la tesis. Por ejemplo: la íntima relación entre el transporte marítimo y el sector de construcción naval, la responsabilidad de la política internacional y local, la invitación a buscar nuevos modos de construir el futuro del sector a través de la consideración de los impactos ambientales, económicos y sociales a lo largo de ciclo de vida completo de productos y servicios. La necesidad de una responsabilidad social corporativa. Estos temas no se cierran ni terminan, sino que son constantemente replanteados tratando de enriquecerlos. ABSTRACT The direct environmental impact of shipbuilding, which refers to construction, maintenance and repair of vessels, is by no means small. Shipbuilding depends on a large number of processes which by themselves constitute significant risks of damage to the shipyards‘ surrounding environment and which lead to significant emissions of greenhouse gases. In addition, shipbuilding uses some materials which not only may carry serious implications for environmental harm during their production and usage in the ship construction process, but also subsequently during ship repairing, operation, and recycling activities. (OECD 2010) The direct environmental impact of shipbuilding constitutes a major challenge for the industry. But this impact is not limited on their immediate surroundings, but while not being directly responsible for the impact on the environment from the operation and final recycling of commercial ships, shipbuilding is an integral part of these activities. (OECD 2010) With this in mind, this thesis is suggested that the shipbuilding industry can and must take up their environmental responsibilities not only on their immediate surroundings, also on the ships operation, becoming aware through a “life cycle” approach to ships, the environmental performance of the industry as a whole. As the environmental impact of the industry is becoming increasingly visible in the public domain much more effort is required for the sake of “green growth” which implies the ability to increase economic activity or output while lowering, or eliminating, environmental impacts. This will be an imperative for any future industrial activity and will naturally demand intricate environmental knowledge pertaining to all associated processes. This thesis making use as a valuable source of information of the developments and results of an European FP7-collaborative project called "Eco_REFITEC, coordinated by the author of this thesis on behalf of the Foundation Center Technology SOERMAR, has as its primary objective to investigate the interpretation of a sustainable Shipbuilding and Maritime Transport concept and the challenges and opportunities involved in applying for the Shipbuilding and ship repair Sector. It is done to improve the current understanding regarding sustainable shipping and to show the application experience in shipbuilding and ship repair shipyards. Assuming that sustainability is more than just an act but a process, this academic work it also aims to contribute to a much better understanding of the maritime industry and its impact with respect to climate change, and help in identifying areas for better environmental performance beyond the shipyard's own operations; shedding light on how shipbuilding can contribute in improving efficiency and reducing CO2 emissions in shipping. It is my hope that this thesis can help the Shipbuilding Industry to abandon its traditional perspective where each simply looks at its own activities to take a broader view becoming aware as to how their decisions may further affect downstream activities and their impacts on the environment, climate change and green growth. Although each chapter will have its own subject and specific approach, it will also take up and re-examine important questions previously dealt with. This is particularly the case with a number of themes which will reappear as the thesis unfolds. As example I will point to the intimate relationship between the shipping and shipbuilding industry, the responsibility of international and local policy, the call to seek other ways of building the future of the sector through the consideration of the environmental, economic and social impacts over the full life cycle of the products and services, the need for a corporate social responsibility. These questions will not be dealt with once and for all, but reframed and enriched again and again.
Resumo:
El objetivo de ésta tesis es estudiar cómo desarrollar una aplicación informática que implemente algoritmos numéricos de evaluación de características hidrodinámicas de modelos geométricos representativos de carenas de buques. Se trata de especificar los requisitos necesarios que debe cumplir un programa para informático orientado a dar solución a un determinado problema hidródinámico, como es simular el comportamiento en balance de un buque sometido a oleaje, de popa o proa. una vez especificada la aplicación se realizará un diseño del programa; se estudiarán alternativas para implementar la aplicación; se explicará el proceso que ha de seguirse para obtener la aplicación en funcionamiento y se contrastarán los resultados obtenidos en la medida que sea posible. Se pretende sistematizar y sintetizar todo el proceso de desarrollo de software, orientado a la simulación del comportamiento hidrodinámico de un buque, en una metodología que se pondrá a disposición de la comunidad académica y científica en la forma que se considere más adecuada. Se trata, por tanto, de proponer una metodología de desarrollo de software para obetener una aplicación que facilite la evaluación de diferentes alternativas de estudio variando parámetros relativos al problema en estudio y que sea capaz de proporcionar resultados para su análisis. Así mismo se incide en cómo ha de conducirse en el proceso para que dicha aplicación pueda crecer, incorporando soluciones existentes no implementadas o nuevas soluciones que aparezcan en este ámbito de conocimiento. Como aplicación concreta de la aplicación se ha elegido implementar los algoritmos necesarios para evaluar la aparición del balance paramétrico en un buque. En el análisis de éste problema se considera de interés la representación geométrica que se hace de la carena del buque. Además de la carena aparecen otros elementos que tienen influencia determinante en éste estudio, como son las situación de mar y las situaciones de carga. Idealmente, el problema sería resuelto si se consiguiera determinar el ángulo de balance que se produce al enfrentar un buque a las diferentes condiciones de mar. Se pretende preparar un programa utilizando el paradigma de la orientación a objetos. Considero que es la más adecuada forma de modularizar el programa para poder utilizar diferentes modelos de una misma carena y así comparar los resultados de la evaluación del balance paramétrico entre sí. En una etapa posterior se podrían comparar los resultados con otros obtenidos empíricamente. Hablo de una nueva metodología porque pretendo indicar cómo se ha de construir una aplicación de software que sea usable y sobre la que se pueda seguir desarrollando. Esto justifica la selección del lenguaje de programación C++. Se seleccionará un núcleo geométrico de software que permita acoplar de forma versátil los distintos componentes de software que van a construir el programa. Este trabajo pretende aplicar el desarrollo de software a un aspecto concreto del área de conocimiento de la hidrodinámica. No se pretende aportar nuevos algoritmos para resolver problemas de hidrodinámica, sino diseñar un conjunto de objetos de software que implementen soluciones existentes a conocidas soluciones numéricas a dichos problemas. Se trata fundamentalmente de un trabajo de software, más que de hidrodinámica. Lo que aporta de novedad es una nueva forma de realizar un programa aplicado a los cálculos hidrodinámicos relativos a la determinación del balance paramétrico, que pueda crecer e incorporar cualquier novedad que pueda surgir más adelante. Esto será posible por la programación modular utilizada y los objetos que representan cada uno de los elementos que intervienen en la determinación del balance paramétrico. La elección de aplicar la metodología a la predicción del balance paramétrico se debe a que este concepto es uno de los elementos que intervienen en la evaluación de criterios de estabilidad de segunda generación que estan en estudio para su futura aplicación en el ámbito de la construcción naval. Es por tanto un estudio que despierta interés por su próxima utilidad. ABSTRACT The aim of this thesis is to study how to develop a computer application implementing numerical algorithms to assess hydrodynamic features of geometrical models of vessels. It is therefore to propose a methodology for software development applied to an hydrodynamic problem, in order to evaluate different study alternatives by varying different parameters related to the problem and to be capable of providing results for analysis. As a concrete application of the program it has been chosen to implement the algorithms necessary for evaluating the appearance of parametric rolling in a vessel. In the analysis of this problem it is considered of interest the geometrical representation of the hull of the ship and other elements which have decisive influence in this phenomena, such as the sea situation and the loading condition. Ideally, the application would determine the roll angle that occurs when a ship is on waves of different characteristics. It aims to prepare a program by using the paradigm of object oriented programming. I think it is the best methodology to modularize the program. My intention is to show how face the global process of developing an application from the initial specification until the final release of the program. The process will keep in mind the spefici objetives of usability and the possibility of growing in the scope of the software. This work intends to apply software development to a particular aspect the area of knowledge of hydrodynamics. It is not intended to provide new algorithms for solving problems of hydrodynamics, but designing a set of software objects that implement existing solutions to these problems. This is essentially a job software rather than hydrodynamic. The novelty of this thesis stands in this work focuses in describing how to apply the whole proccess of software engineering to hydrodinamics problems. The choice of the prediction of parametric balance as the main objetive to be applied to is because this concept is one of the elements involved in the evaluation of the intact stability criteria of second generation. Therefore, I consider this study as relevant usefull for the future application in the field of shipbuilding.