A dual-band priority assignment algorithm for dynamic QoS resource management

Future high-quality consumer electronics will contain a number of applications running in a highly dynamic environment, and their execution will need to be efficiently arbitrated by the underlying platform software. The multimedia applications that currently execute in such similar contexts face frequent run-time variations in their resource demands, originated by the greedy nature of the multimedia processing itself. Changes in resource demands are triggered by numerous reasons (e.g. a switch in the input media compression format). Such situations require real-time adaptation mechanisms to adjust the system operation to the new requirements, and this must be done seamlessly to satisfy the user experience. One solution for efficiently managing application execution is to apply quality of service resource management techniques, based on assigning and enforcing resource contracts to applications. Most resource management solutions provide temporal isolation by enforcing resource assignments and avoiding any resource overruns. However, this has a clear limitation over the cost-effective resource usage. This paper presents a simple priority assignment scheme based on uniform priority bands to allow that greedy multimedia tasks incur in safe overruns that increase resource usage and do not threaten the timely execution of non-overrunning tasks. Experimental results show that the proposed priority assignment scheme in combination with a resource accounting mechanism preserves timely multimedia execution and delivery, achieves a higher cost-effective processor usage, and guarantees the execution isolation of non-overrunning tasks.

Integración del descodificador OpenSVC en el DSP del OMAP3530

Hoy en día el uso de dispositivos portátiles multimedia es ya una realidad totalmente habitual. Además, estos dispositivos tienen una capacidad de cálculo y unos recursos gráficos y de memoria altos, tanto es así que por ejemplo en un móvil se pueden reproducir vídeos de muy alta calidad o tener capacidad para manejar entornos 3D. El precio del uso de estos recursos es un mayor consumo de batería que en ocasiones es demasiado alto y acortan en gran medida la vida de la carga útil de la batería. El Grupo de Diseño Electrónico y Microelectrónico de la Universidad Politécnica de Madrid ha abierto una línea de trabajo que busca la optimización del consumo de energía en este tipo de dispositivos, concretamente en el ámbito de la reproducción de vídeo. El enfoque para afrontar la solución del problema se basa en obtener un mayor rendimiento de la batería a costa de disminuir la experiencia multimedia del usuario. De esta manera, cuando la carga de la batería esté por debajo de un determinado umbral mientras el dispositivo esté reproduciendo un vídeo de alta calidad será el dispositivo quien se autoconfigure dinámicamente para consumir menos potencia en esta tarea, reduciendo la tasa de imágenes por segundo o la resolución del vídeo que se descodifica. Además de lo citado anteriormente se propone dividir la descodificación y la representación del vídeo en dos procesadores, uno de propósito general y otro para procesado digital de señal, con esto se consigue que tener la misma capacidad de cálculo que con un solo procesador pero a una frecuencia menor. Para materializar la propuesta se usará la tarjeta BeagleBoard basada en un procesador multinúcleo OMAP3530 de Texas Instrument que contiene dos núcleos: un ARM1 Cortex-A8 y un DSP2 de la familia C6000. Este procesador multinúcleo además permite modificar la frecuencia de reloj y la tensión de alimentación dinámicamente para conseguir reducir de este modo el consumo del terminal. Por otro lado, como reproductor de vídeos se utilizará una versión de MPlayer que integra un descodificador de vídeo escalable que permite elegir dinámicamente la resolución o las imágenes por segundo que se decodifican para posteriormente mostrarlas. Este reproductor se ejecutará en el núcleo ARM pero debido a la alta carga computacional de la descodificación de vídeos, y que el ARM no está optimizado para este tipo de procesado de datos, el reproductor debe encargar la tarea de la descodificación al DSP. El objetivo de este Proyecto Fin de Carrera consiste en que mientras el descodificador de vídeo está ejecutándose en el núcleo DSP y el Mplayer en el núcleo ARM del OMAP3530 se pueda elegir dinámicamente qué parte del vídeo se descodifica, es decir, seleccionar en tiempo real la calidad o capa del vídeo que se quiere mostrar. Haciendo esto, se podrá quitar carga computacional al núcleo ARM y asignársela al DSP el cuál puede procesarla a menor frecuencia para ahorrar batería. 1 ARM: Es una arquitectura de procesadores de propósito general basada en RISC (Reduced Instruction Set Computer). Es desarrollada por la empresa inglesa ARM holdings. 2 DSP: Procesador Digital de Señal (Digital Signal Processor). Es un sistema basado en procesador, el cual está orientado al cálculo matemático a altas velocidad. Generalmente poseen varias unidades aritmético-lógicas (ALUs) para conseguir realizar varias operaciones simultáneamente. SUMMARY. Nowadays, the use of multimedia devices is a well known reality. In addition, these devices have high graphics and calculus performance and a lot of memory as well. In instance, we can play high quality videos and 3D environments in a mobile phone. That kind of use may increase the device's power consumption and make shorter the battery duration. Electronic and Microelectronic Design Group of Technical University of Madrid has a research line which is looking for optimization of power consumption while these devices are playing videos. The solution of this trouble is based on taking more advantage of battery by decreasing multimedia user experience. On this way, when battery charge is under a threshold while device is playing a high quality video the device is going to configure itself dynamically in order to decrease its power consumption by decreasing frame per second rate, video resolution or increasing the noise in the decoded frame. It is proposed splitting decoding and representation tasks in two processors in order to have the same calculus capability with lower frecuency. The first one is specialized in digital signal processing and the other one is a general purpose processor. In order to materialize this proposal we will use a board called BeagleBoard which is based on a multicore processor called OMAP3530 from Texas Instrument. This processor includes two cores: ARM Cortex-A8 and a TMS320C64+ DSP core. Changing clock frequency and supply voltage is allowed by OMAP3530, we can decrease the power consumption on this way. On the other hand, MPlayer will be used as video player. It includes a scalable video decoder which let us changing dynamically the resolution or frames per second rate of the video in order to show it later. This player will be executed by ARM core but this is not optimized for this task, for that reason, DSP core will be used to decoding video. The target of this final career project is being able to choose which part of the video is decoded each moment while decoder is executed by DSP and Mplayer by ARM. It will be able to change in real time the video quality, resolution and frames per second that user want to show. On this way, reducing the computational charge within the processor will be possible.

Case study on mobile applications UX: effect of the usage of a crosss-platform development framework

Cross-platform development frameworks for mobile applications promise important advantages in cost cuttings and easy maintenance, posing as a very good option for organizations interested in the design of mobile applications for several platforms. Given that platform conventions are especially important for the User eXperience (UX) of mobile applications, the usage of framework where the same code defines the behavior of the app in different platforms could have negative impact in the UX. The objetive of this study is comparing the cross-platform and the native approach for being able to determine if the selected development approach has any impact on the users in terms of UX. To be able to set a base line under this subject, study on cross-platform frameworks was performed to select the most appropriate one from a UX point of view. In order to achieve the objectives of this work, two development teams have developed two versions of the same application; one using framework that generates Android and iOS versions automatically, and another team developing native versions of the same application. The alternative versions for each platform have been evaluated with 37 users with a combination of a laboratory usability test and a longitudinal study. The results show that differences are minimal in the Android version, but in iOS, even if a reasonable good UX can be obtained with the usage of this framework by an UX-conscious design team, a higher level of UX can be obtained directly developing in native code.

CloudRoom: módulo de gestión de cursos online, abiertos y masivos

La razón de este proyecto, es la de desarrollar el módulo de cursos de la plataforma de Massive Online Open Courses (MOOCs), CloudRoom. Dicho módulo está englobado en una arquitectura orientada a servicios (SOA) y en una infraestructura de Cloud Computing utilizando Amazon Web Services (AWS). Nuestro objetivo es el de diseñar un Software as a Service (SaaS) robusto con las cualidades que a un producto de este tipo se le estiman: alta disponibilidad, alto rendimiento, gran experiencia de usuario y gran extensibilidad del sistema. Para lograrlo, se llevará a cabo la integración de las últimas tendencias tecnológicas dentro del desarrollo de sistemas distribuidos como Neo4j, Node.JS, Servicios RESTful, CoffeeScript. Todo esto siguiendo un estrategia de desarrollo PLAN-DO-CHECK utilizando Scrum y prácticas de metodologías ágiles. ---ABSTRACT---The reason of this Project is to develop the courses‟ module of CloudRoom, a Massive Online Open Courses platform. This module is encapsulated in a service-oriented architecture (SOA) based on a Cloud Computing infrastructure built on Amazon Web Services (AWS). Our goal is to design a robust Software as a Service (SaaS) with the qualities that are estimated in a product of this type: high availability, high performance, great user experience and great extensibility of the system. In order to address this, we carry out the integration of the latest technology trends in the development of distributed systems: Neo4j, Node.JS, RESTful Services and CoffeeScript. All of this, following a development strategy PLAN-DO-CHECK, using Scrum and practices of agile methodologies.

Análisis de usabilidad y aplicación de los resultados en el desarrollo de plataformas web

Este trabajo trata cómo se pueden aplicar las técnicas de análisis de usabilidad al desarrollo de plataformas web. Actualmente es común que los servicios sean ofrecidos mediante plataformas web para un grupo muy heterogéneo de personas. Por otra parte, los análisis de usabilidad son una herramienta muy útil para conocer cómo interactúan las personas con los ordenadores y mejorar el diseño de las aplicaciones. Realizar un buen diseño permite mejorar la experiencia de usuario, factor fundamental para el éxito de cualquier producto que requiera interacción con el usuario. A continuación se describen las diferentes fases de los test de usabilidad y se detalla cómo han sido aplicadas durante el desarrollo del proyecto. Finalmente, se presentarán los resultados obtenidos durante la evaluación de la plataforma y el análisis de los mismos indicando cómo han afectado al diseño de la plataforma. ---ABSTRACT---This document discusses how to apply usability test techniques over web platform development. Nowadays, it is common that services are offered through web platforms for a large group of heterogeneous people. Moreover, usability tests are a very useful tool to understand human-computer interaction and improve the design of the applications. A good design can improve user experience, which is essential for the success of any product that requires user interaction. The following pages describes the different phases of usability testing and detail how these have been applied during the development of the project. Finally, the results obtained during the platform evaluation are presented and analysed, explaining how they have affected the design of the platform.

MAIA: an event-based modular architecture for intelligent agents

Online services are no longer isolated. The release of public APIs and technologies such as web hooks are allowing users and developers to access their information easily. Intelligent agents could use this information to provide a better user experience across services, connecting services with smart automatic. behaviours or actions. However, agent platforms are not prepared to easily add external sources such as web services, which hinders the usage of agents in the so-called Evented or Live Web. As a solution, this paper introduces an event-based architecture for agent systems, in accordance with the new tendencies in web programming. In particular, it is focused on personal agents that interact with several web services. With this architecture, called MAIA, connecting to new web services does not involve any modification in the platform.

A case study on cross-platform development frameworks for mobile applications and UX

Cross-platform development frameworks for mobile applications promise important advantages in cost cuttings and easy maintenance, posing as a very good option for organizations interested in the design of mobile applications for several platforms. Given that platform conventions are especially important for the User eXperience (UX) of mobile applications, the usage of a framework where the same code defines the behavior of the app in different platforms could have a negative impact in the UX. This paper describes a study where two independent teams have designed two different versions of a mobile application, one using a framework that generates Android and iOS versions automatically, and another team using native tools. The alternative versions for each platform have been evaluated with 37 users with a combination of a laboratory usability test and a longitudinal study. The results show that differences are minimal in the Android platform, but in iOS, even if a reasonably good UX can be obtained with the usage of this framework by an UX-conscious design team, a higher level of UX can be obtained directly developing with a native tool.

Software architecture implementation based on OpenSim

One of the objectives of the European Higher Education Area is the promotion of collaborative and informal learning through the implementation of educational practices. 3D virtual environments become an ideal space for such activities. On the other hand, the problem of financing in Spanish universities has led to the search for new ways to optimize available resources. The Technical University of Madrid requires the use of laboratories which due to their dangerousness, duration or control of the developed processes are difficult to perform in real life. For this reason, we have developed several 3D laboratories in virtual environment. The laboratories are built on open source platform OpenSim. In this paper it is exposed the use of the OpenSim platform for these new teaching experiences and the new design of the software architecture. This architecture requires the adaptation of the platform to the needs of the users and the different laboratories of our University. We will explain the structure of the implemented architecture and the process of creating and configuring it. The proposed architecture is decentralized, each laboratory is housed in different an educational center. The architecture adds several services, among others, the creation and management of users automated, communication between external services and platforms in different program languages. Therefore, we achieve improving the user experience and rising the functionalities of laboratories.

Mining mobile apps reviews to support release planning

The mobile apps market is a tremendous success, with millions of apps downloaded and used every day by users spread all around the world. For apps’ developers, having their apps published on one of the major app stores (e.g. Google Play market) is just the beginning of the apps lifecycle. Indeed, in order to successfully compete with the other apps in the market, an app has to be updated frequently by adding new attractive features and by fixing existing bugs. Clearly, any developer interested in increasing the success of her app should try to implement features desired by the app’s users and to fix bugs affecting the user experience of many of them. A precious source of information to decide how to collect users’ opinions and wishes is represented by the reviews left by users on the store from which they downloaded the app. However, to exploit such information the app’s developer should manually read each user review and verify if it contains useful information (e.g. suggestions for new features). This is something not doable if the app receives hundreds of reviews per day, as happens for the very popular apps on the market. In this work, our aim is to provide support to mobile apps developers by proposing a novel approach exploiting data mining, natural language processing, machine learning, and clustering techniques in order to classify the user reviews on the basis of the information they contain (e.g. useless, suggestion for new features, bugs reporting). Such an approach has been empirically evaluated and made available in a web-­‐based tool publicly available to all apps’ developers. The achieved results showed that the developed tool: (i) is able to correctly categorise user reviews on the basis of their content (e.g. isolating those reporting bugs) with 78% of accuracy, (ii) produces clusters of reviews (e.g. groups together reviews indicating exactly the same bug to be fixed) that are meaningful from a developer’s point-­‐of-­‐view, and (iii) is considered useful by a software company working in the mobile apps’ development market.

Atención al cliente y medios sociales en la empresa

online donde el contenido es creado por los propios usuarios mediante el uso de las tecnologías de la web 2.0, que facilitan la edición, la publicación y el intercambio de información, de tal manera que los social media están democratizando las comunicaciones. Según datos publicados por eMarketer, casi el 25% del total de la inversión publicitaria mundial para el 2014 estará dirigida a medios digitales. Los medios de comunicación tradicionales están sumidos desde algún tiempo en una profunda crisis. En los comienzos de Internet, los protagonistas de este sector han creído en la red como un medio de publicación de contenidos en una única dirección, esto es la web 1.0, personas conectándose a páginas web. El típico lector de revista y seminario se ha convertido en un nuevo consumidor con necesidades muy distintas. El lector de un medio tradicional se encuentra con contenido cerrado, sin posibilidad de ser filtrado, que busca dirigir su opinión. Con el método tradicional no es posible ni personalizar el contenido ni la experiencia de uso. De ahí el nacimiento de la web 2.0, personas conectándose a personas (redes sociales). En un futuro cercano, van a triunfar las empresas, sectores y marcas que sepan adaptarse a la llegada de los social media, y que además de desarrollar su línea de negocio habitual, se conviertan en plataformas para la conversación y la construcción de contenidos en colaboración. En este proyecto voy a desarrollar el caso particular de una empresa de telecomunicaciones con una estrategia que use los social media como plataforma de atención al cliente, y para interaccionar también con su almacén en DHL. Los servicios añadidos que dicha empresa de telecomunicaciones ofrece a sus seguidores, clientes externos e internos se pueden agrupar en las siguientes funcionalidades:  Hacer un volcado del sistema de gestión de incidencias de una empresa de telecomunicaciones en las redes sociales, a través de mensajes privados. Dichos mensajes privados se enviarán a las páginas de Facebook y Twitter de los clientes.  Seguimiento por parte del cliente de puestas en marcha de los nuevos servicios a través de mensajes privados en Facebook y Twitter. Mediante este servicio el cliente podrá comprobar a través de las redes sociales el estado de su pedido e intercambiar información de utilidad con la empresa.  Desarrollar a través de las redes sociales una herramienta de marketing para interaccionar con los clientes y posibles seguidores. A través de los canales de los social media se proporciona a los seguidores información de valor sobre novedades del mercado de las telecomunicaciones, soporte técnico, dudas, consejos sobre implementaciones técnicas, equipos de telecomunicaciones,.etc.Es decir, crear una plataforma de conversación entre usuarios, que aporte a los seguidores conocimientos y soluciones útiles para la problemática de sus negocios.  Usar Facebook como base de datos y medio de comunicación entre nuestra empresa de telecomunicaciones y el almacén externalizado en DHL. Supongo que la primera pregunta que debo responder sería, ¿por qué un cliente de una empresa de telecomunicaciones estaría interesado en seguir a su proveedor a través de redes sociales? Facebook tiene en 2014 1,28 billones de usuarios activos. Twitter, la cuarta plataforma social por número de usuarios tras Facebook, alcanzó los 255 millones de usuarios en los primeros meses de 2014. La segunda red social en número de seguidores es Youtube, con un billón de usuarios. El 61,5% de los usuarios de Facebook visita la red todos los días. Los twitteros envían 110 millones tweets por día, tienen fama de muy activos, especialmente por la mañana. En 60 días, se sube más contenido de vídeo a YouTube que el producido por las tres principales cadenas de televisión estadounidense durante 60 años. Como conclusión, las redes sociales están ganando cada día más terreno, es un entorno de comunicación bidireccional en auge cada vez más extendido, por lo cual los usuarios no tienen que dedicar tiempo extra a conocer la herramienta de atención al cliente de su empresa, al usar ésta un canal fácil, conocido, rápido, versátil y gratuito como son las redes sociales. ABSTRACT. Social media are platforms of online communication where content is created by users themselves using technologies of web 2.0, which facilitate the editing, publication and the exchange of information, so that the social media are democratizing communications. According to data published by eMarketer, nearly 25% of the total global ad spend for 2014 will target digital media. The traditional media are trapped for some time in deep crisis. In the early days of the internet, the players of the sector have believed in the network as a means of publishing content in a single direction, this is the web 1.0, connecting people to websites. The typical magazine reader has become a new consumer with very different needs. Traditional medium readers encounter a closed content, unable to be filtered, which seeks handle their opinion. The traditional method doesn’t allow to customize the content and user experience. Hence the birth of Web 2.0, connecting people to people. In the near future, will succeed companies, sectors and brands who can adapt to the advent of social media, and further to develop their line of business as usual, become platforms for conversation and building collaborative content. In this project I will develop the particular case of a telecommunications company with a strategy to use social media as a platform for Customer Service, and also to interact with DHL warehouse. The additional services that the company offers telecommunications followers, external and internal customers can be grouped into the following functionality:  Make a dump of the incident management system of a telecommunications company in social networks through private messages. These private messages are sent Facebook and Twitter clients.  Monitoring by the client launched new services through private messages on Facebook and Twitter. Through this service, customers can check through the social networks of your order status and share useful information with the company.  Develop through social media as a marketing tool to interact with customers and potential followers.Our telco will provide to followers through social media channels valuable information on market developments in telecommunications, technical support, questions, advice on technical implementations, telecommunications equipment,etc. Then we create a platform for discussion between users, to provide followers useful knowledge and solutions to their business problems.  Use Facebook as a database and means of communication between our telco and outsourced telecommunications in DHL warehouse. I guess the first question that must be answered is why a customer of a telecommunications company would be interested in following your provider via social networks. Facebook has 1.28 billion active users in 2014. Twitter, the fourth social platform for many users after Facebook reached 255 million users in the first months of 2014. The second social network on number of followers is YouTube, with a billion users. 61.5% of Facebook users visit the network every day. The twitter users send 110 million tweets per day, have a reputation for very active, especially in the morning. In 60 days, it is produced more video content to YouTube by the three major US television for 60 years. In conclusion, social networks are gaining more ground every day. It is an environment of two-way communication on the rise, so users do not have to spend extra time to learn the tool of Customer Care telco, by using this easy, known, fast, versatile and free channels as are social networks.

Interacción combinada táctil 3D para manejo de colecciones de documentos

Actualmente existen varios dispositivos que aceptan gestos sobre superficies táctiles, sean celulares, tabletas, computadores, etc. a los cuales las personas se acostumbran rápidamente a su uso y los aceptan como herramientas necesarias en su vida. Del mismo modo existen algunas aplicaciones que manejan entornos en 3D, y permiten captar gestos realizados con las manos, cuerpo, cabeza. Estas técnicas se han desarrollado mucho por separado pero se ha podido evidenciar en base a los artículos revisados que no existen muchos estudios que combinen las aplicaciones táctiles con las 3D manejadas por gestos en el aire. El presente trabajo muestra un prototipo que permite la comunicación y coordinación entre dos aplicaciones, una que muestra documentos representados por esferas en una aplicación con interacción táctil desarrollada en Unity que funciona sobre Android, y una segunda aplicación desarrollada también en Unity que maneja un entorno 3D con el que se interactúa mediante gestos realizados en el aire. Luego de algunos intentos la interacción entre ambas aplicaciones fue lograda implementando comunicación por sockets entre la aplicación en el dispositivo Android y la aplicación 3D que se encuentra alojada en un computador con Windows 7. La captura de gestos en el aire se realiza mediante el sistema Tracking Tools desarrollado por la compañía Optitrack que captura los movimientos con cámaras infrarrojas y marcadores en los dedos. Este sistema envía los datos de los gestos a nuestra aplicación 3D. Estos equipos son de propiedad del laboratorio Decoroso Crespo de la Universidad Politécnica de Madrid. Una vez lograda la implementación e interacción entre las aplicaciones se han realizado pruebas de usabilidad con nueve estudiantes del Máster Universitario en Software y Sistemas de la Universidad Politécnica de Madrid. Cada uno ha respondido una serie de encuestas para poder obtener resultados sobre cuán usable es el prototipo, la experiencia del usuario y qué mejoras se podrían realizar sobre éste. En la parte final de este documento se presentan los resultados de las encuestas y se muestran las conclusiones y trabajo futuro.---ABSTRACT---Currently there are several devices that accept gestures on touch surfaces like phones, tablets, computers, etc. to which people quickly become accustomed to their use and accept them as necessary tools in their life. Similarly there are some applications that handle 3D environments and like televisions, holograms and allow capture gestures made with hands, body, and head. These techniques have been developed on a separated way but based on some research we may say that the are not many studies that combine touch with 3D applications handled by gestures in the air. This paper presents a prototype of the interaction of two issues of a 2D showing documents represented by spheres on a touch application developed in Unity that works on Android and allows communicating with the second application also developed in Unity that handles a 3D environment interaction of gestures made in air. After some attempts interaction was achieved by implementing communication sockets between the application on the Android device and 3D application that is hosted on a computer with windows 7, and gestures capturing in the air is done by the system Tracking Tools developed by the Optitrack company it captures movements with infrared cameras and markers on the fingers, which sends data to this application gestures, these equipment are owned by the Decoroso Crespo laboratory of the Polytechnic University of Madrid. Once achieved the interaction of applications has been conducted performance tests with ten students of the university master of the Universidad Politécnica de Madrid, each has answered a series of surveys to get results on how usable is the prototype, the user experience and that improvements could be made on this.

Supporting End-User Development through a New Composition Model: An Empirical Study

End-user development (EUD) is much hyped, and its impact has outstripped even the most optimistic forecasts. Even so, the vision of end users programming their own solutions has not yet materialized. This will continue to be so unless we in both industry and the research community set ourselves the ambitious challenge of devising end to end an end-user application development model for developing a new age of EUD tools. We have embarked on this venture, and this paper presents the main insights and outcomes of our research and development efforts as part of a number of successful EU research projects. Our proposal not only aims to reshape software engineering to meet the needs of EUD but also to refashion its components as solution building blocks instead of programs and software developments. This way, end users will really be empowered to build solutions based on artefacts akin to their expertise and understanding of ideal solutions

User benefit assessment by a dynamic LUTI model for Madrid

Assessing users’ benefit in a transport policy implementation has been studied by many researchers using theoretical or empirical measures. However, few of them measure users’ benefit in a different way from the consumer surplus. Therefore, this paper aims to assess a new measure of user benefits by weighting consumer surplus in order to include equity assessment for different transport policies simulated in a dynamic middle-term LUTI model adapted to the case study of Madrid. Three different transport policies, including road pricing, parking charge and public transport improvement have been simulated through the Metropolitan Activity Relocation Simulator, MARS, the LUTI calibrated model for Madrid). A social welfare function (WF) is defined using a cost benefit analysis function that includes mainly costs and benefits of users and operators of the transport system. Particularly, the part of welfare function concerning the users, (i.e. consumer surplus), is modified by a compensating weight (CW) which represents the inverse of household income level. Based on the modified social welfare function, the effects on the measure of users benefits are estimated and compared with the old WF ́s results as well. The result of the analysis shows that road pricing leads a negative effect on the users benefits specially on the low income users. Actually, the road pricing and parking charge implementation results like a regressive policy especially at long term. Public transport improvement scenario brings more positive effects on low income user benefits. The integrated (road pricing and increasing public services) policy scenario is the one which receive the most user benefits. The results of this research could be a key issue to understanding the relationship between transport systems policies and user benefits distribution in a metropolitan context.

A model to develop a platform for personalised health applications

Antecedentes Europa vive una situación insostenible. Desde el 2008 se han reducido los recursos de los gobiernos a raíz de la crisis económica. El continente Europeo envejece con ritmo constante al punto que se prevé que en 2050 habrá sólo dos trabajadores por jubilado [54]. A esta situación se le añade el aumento de la incidencia de las enfermedades crónicas, relacionadas con el envejecimiento, cuyo coste puede alcanzar el 7% del PIB de un país [51]. Es necesario un cambio de paradigma. Una nueva manera de cuidar de la salud de las personas: sustentable, eficaz y preventiva más que curativa. Algunos estudios abogan por el cuidado personalizado de la salud (pHealth). En este modelo las prácticas médicas son adaptadas e individualizadas al paciente, desde la detección de los factores de riesgo hasta la personalización de los tratamientos basada en la respuesta del individuo [81]. El cuidado personalizado de la salud está asociado a menudo al uso de las tecnologías de la información y comunicación (TICs) que, con su desarrollo exponencial, ofrecen oportunidades interesantes para la mejora de la salud. El cambio de paradigma hacia el pHealth está lentamente ocurriendo, tanto en el ámbito de la investigación como en la industria, pero todavía no de manera significativa. Existen todavía muchas barreras relacionadas a la economía, a la política y la cultura. También existen barreras puramente tecnológicas, como la falta de sistemas de información interoperables [199]. A pesar de que los aspectos de interoperabilidad están evolucionando, todavía hace falta un diseño de referencia especialmente direccionado a la implementación y el despliegue en gran escala de sistemas basados en pHealth. La presente Tesis representa un intento de organizar la disciplina de la aplicación de las TICs al cuidado personalizado de la salud en un modelo de referencia, que permita la creación de plataformas de desarrollo de software para simplificar tareas comunes de desarrollo en este dominio. Preguntas de investigación RQ1 >Es posible definir un modelo, basado en técnicas de ingeniería del software, que represente el dominio del cuidado personalizado de la salud de una forma abstracta y representativa? RQ2 >Es posible construir una plataforma de desarrollo basada en este modelo? RQ3 >Esta plataforma ayuda a los desarrolladores a crear sistemas pHealth complejos e integrados? Métodos Para la descripción del modelo se adoptó el estándar ISO/IEC/IEEE 42010por ser lo suficientemente general y abstracto para el amplio enfoque de esta tesis [25]. El modelo está definido en varias partes: un modelo conceptual, expresado a través de mapas conceptuales que representan las partes interesadas (stakeholders), los artefactos y la información compartida; y escenarios y casos de uso para la descripción de sus funcionalidades. El modelo fue desarrollado de acuerdo a la información obtenida del análisis de la literatura, incluyendo 7 informes industriales y científicos, 9 estándares, 10 artículos en conferencias, 37 artículos en revistas, 25 páginas web y 5 libros. Basándose en el modelo se definieron los requisitos para la creación de la plataforma de desarrollo, enriquecidos por otros requisitos recolectados a través de una encuesta realizada a 11 ingenieros con experiencia en la rama. Para el desarrollo de la plataforma, se adoptó la metodología de integración continua [74] que permitió ejecutar tests automáticos en un servidor y también desplegar aplicaciones en una página web. En cuanto a la metodología utilizada para la validación se adoptó un marco para la formulación de teorías en la ingeniería del software [181]. Esto requiere el desarrollo de modelos y proposiciones que han de ser validados dentro de un ámbito de investigación definido, y que sirvan para guiar al investigador en la búsqueda de la evidencia necesaria para justificarla. La validación del modelo fue desarrollada mediante una encuesta online en tres rondas con un número creciente de invitados. El cuestionario fue enviado a 134 contactos y distribuido en algunos canales públicos como listas de correo y redes sociales. El objetivo era evaluar la legibilidad del modelo, su nivel de cobertura del dominio y su potencial utilidad en el diseño de sistemas derivados. El cuestionario incluía preguntas cuantitativas de tipo Likert y campos para recolección de comentarios. La plataforma de desarrollo fue validada en dos etapas. En la primera etapa se utilizó la plataforma en un experimento a pequeña escala, que consistió en una sesión de entrenamiento de 12 horas en la que 4 desarrolladores tuvieron que desarrollar algunos casos de uso y reunirse en un grupo focal para discutir su uso. La segunda etapa se realizó durante los tests de un proyecto en gran escala llamado HeartCycle [160]. En este proyecto un equipo de diseñadores y programadores desarrollaron tres aplicaciones en el campo de las enfermedades cardio-vasculares. Una de estas aplicaciones fue testeada en un ensayo clínico con pacientes reales. Al analizar el proyecto, el equipo de desarrollo se reunió en un grupo focal para identificar las ventajas y desventajas de la plataforma y su utilidad. Resultados Por lo que concierne el modelo que describe el dominio del pHealth, la parte conceptual incluye una descripción de los roles principales y las preocupaciones de los participantes, un modelo de los artefactos TIC que se usan comúnmente y un modelo para representar los datos típicos que son necesarios formalizar e intercambiar entre sistemas basados en pHealth. El modelo funcional incluye un conjunto de 18 escenarios, repartidos en: punto de vista de la persona asistida, punto de vista del cuidador, punto de vista del desarrollador, punto de vista de los proveedores de tecnologías y punto de vista de las autoridades; y un conjunto de 52 casos de uso repartidos en 6 categorías: actividades de la persona asistida, reacciones del sistema, actividades del cuidador, \engagement" del usuario, actividades del desarrollador y actividades de despliegue. Como resultado del cuestionario de validación del modelo, un total de 65 personas revisó el modelo proporcionando su nivel de acuerdo con las dimensiones evaluadas y un total de 248 comentarios sobre cómo mejorar el modelo. Los conocimientos de los participantes variaban desde la ingeniería del software (70%) hasta las especialidades médicas (15%), con declarado interés en eHealth (24%), mHealth (16%), Ambient Assisted Living (21%), medicina personalizada (5%), sistemas basados en pHealth (15%), informática médica (10%) e ingeniería biomédica (8%) con una media de 7.25_4.99 años de experiencia en estas áreas. Los resultados de la encuesta muestran que los expertos contactados consideran el modelo fácil de leer (media de 1.89_0.79 siendo 1 el valor más favorable y 5 el peor), suficientemente abstracto (1.99_0.88) y formal (2.13_0.77), con una cobertura suficiente del dominio (2.26_0.95), útil para describir el dominio (2.02_0.7) y para generar sistemas más específicos (2_0.75). Los expertos también reportan un interés parcial en utilizar el modelo en su trabajo (2.48_0.91). Gracias a sus comentarios, el modelo fue mejorado y enriquecido con conceptos que faltaban, aunque no se pudo demonstrar su mejora en las dimensiones evaluadas, dada la composición diferente de personas en las tres rondas de evaluación. Desde el modelo, se generó una plataforma de desarrollo llamada \pHealth Patient Platform (pHPP)". La plataforma desarrollada incluye librerías, herramientas de programación y desarrollo, un tutorial y una aplicación de ejemplo. Se definieron cuatro módulos principales de la arquitectura: el Data Collection Engine, que permite abstraer las fuentes de datos como sensores o servicios externos, mapeando los datos a bases de datos u ontologías, y permitiendo interacción basada en eventos; el GUI Engine, que abstrae la interfaz de usuario en un modelo de interacción basado en mensajes; y el Rule Engine, que proporciona a los desarrolladores un medio simple para programar la lógica de la aplicación en forma de reglas \if-then". Después de que la plataforma pHPP fue utilizada durante 5 años en el proyecto HeartCycle, 5 desarrolladores fueron reunidos en un grupo de discusión para analizar y evaluar la plataforma. De estas evaluaciones se concluye que la plataforma fue diseñada para encajar las necesidades de los ingenieros que trabajan en la rama, permitiendo la separación de problemas entre las distintas especialidades, y simplificando algunas tareas de desarrollo como el manejo de datos y la interacción asíncrona. A pesar de ello, se encontraron algunos defectos a causa de la inmadurez de algunas tecnologías empleadas, y la ausencia de algunas herramientas específicas para el dominio como el procesado de datos o algunos protocolos de comunicación relacionados con la salud. Dentro del proyecto HeartCycle la plataforma fue utilizada para el desarrollo de la aplicación \Guided Exercise", un sistema TIC para la rehabilitación de pacientes que han sufrido un infarto del miocardio. El sistema fue testeado en un ensayo clínico randomizado en el cual a 55 pacientes se les dio el sistema para su uso por 21 semanas. De los resultados técnicos del ensayo se puede concluir que, a pesar de algunos errores menores prontamente corregidos durante el estudio, la plataforma es estable y fiable. Conclusiones La investigación llevada a cabo en esta Tesis y los resultados obtenidos proporcionan las respuestas a las tres preguntas de investigación que motivaron este trabajo: RQ1 Se ha desarrollado un modelo para representar el dominio de los sistemas personalizados de salud. La evaluación hecha por los expertos de la rama concluye que el modelo representa el dominio con precisión y con un balance apropiado entre abstracción y detalle. RQ2 Se ha desarrollado, con éxito, una plataforma de desarrollo basada en el modelo. RQ3 Se ha demostrado que la plataforma es capaz de ayudar a los desarrolladores en la creación de software pHealth complejos. Las ventajas de la plataforma han sido demostradas en el ámbito de un proyecto de gran escala, aunque el enfoque genérico adoptado indica que la plataforma podría ofrecer beneficios también en otros contextos. Los resultados de estas evaluaciones ofrecen indicios de que, ambos, el modelo y la plataforma serán buenos candidatos para poderse convertir en una referencia para futuros desarrollos de sistemas pHealth. ABSTRACT Background Europe is living in an unsustainable situation. The economic crisis has been reducing governments' economic resources since 2008 and threatening social and health systems, while the proportion of older people in the European population continues to increase so that it is foreseen that in 2050 there will be only two workers per retiree [54]. To this situation it should be added the rise, strongly related to age, of chronic diseases the burden of which has been estimated to be up to the 7% of a country's gross domestic product [51]. There is a need for a paradigm shift, the need for a new way of caring for people's health, shifting the focus from curing conditions that have arisen to a sustainable and effective approach with the emphasis on prevention. Some advocate the adoption of personalised health care (pHealth), a model where medical practices are tailored to the patient's unique life, from the detection of risk factors to the customization of treatments based on each individual's response [81]. Personalised health is often associated to the use of Information and Communications Technology (ICT), that, with its exponential development, offers interesting opportunities for improving healthcare. The shift towards pHealth is slowly taking place, both in research and in industry, but the change is not significant yet. Many barriers still exist related to economy, politics and culture, while others are purely technological, like the lack of interoperable information systems [199]. Though interoperability aspects are evolving, there is still the need of a reference design, especially tackling implementation and large scale deployment of pHealth systems. This thesis contributes to organizing the subject of ICT systems for personalised health into a reference model that allows for the creation of software development platforms to ease common development issues in the domain. Research questions RQ1 Is it possible to define a model, based on software engineering techniques, for representing the personalised health domain in an abstract and representative way? RQ2 Is it possible to build a development platform based on this model? RQ3 Does the development platform help developers create complex integrated pHealth systems? Methods As method for describing the model, the ISO/IEC/IEEE 42010 framework [25] is adopted for its generality and high level of abstraction. The model is specified in different parts: a conceptual model, which makes use of concept maps, for representing stakeholders, artefacts and shared information, and in scenarios and use cases for the representation of the functionalities of pHealth systems. The model was derived from literature analysis, including 7 industrial and scientific reports, 9 electronic standards, 10 conference proceedings papers, 37 journal papers, 25 websites and 5 books. Based on the reference model, requirements were drawn for building the development platform enriched with a set of requirements gathered in a survey run among 11 experienced engineers. For developing the platform, the continuous integration methodology [74] was adopted which allowed to perform automatic tests on a server and also to deploy packaged releases on a web site. As a validation methodology, a theory building framework for SW engineering was adopted from [181]. The framework, chosen as a guide to find evidence for justifying the research questions, imposed the creation of theories based on models and propositions to be validated within a scope. The validation of the model was conducted as an on-line survey in three validation rounds, encompassing a growing number of participants. The survey was submitted to 134 experts of the field and on some public channels like relevant mailing lists and social networks. Its objective was to assess the model's readability, its level of coverage of the domain and its potential usefulness in the design of actual, derived systems. The questionnaires included quantitative Likert scale questions and free text inputs for comments. The development platform was validated in two scopes. As a small-scale experiment, the platform was used in a 12 hours training session where 4 developers had to perform an exercise consisting in developing a set of typical pHealth use cases At the end of the session, a focus group was held to identify benefits and drawbacks of the platform. The second validation was held as a test-case study in a large scale research project called HeartCycle the aim of which was to develop a closed-loop disease management system for heart failure and coronary heart disease patients [160]. During this project three applications were developed by a team of programmers and designers. One of these applications was tested in a clinical trial with actual patients. At the end of the project, the team was interviewed in a focus group to assess the role the platform had within the project. Results For what regards the model that describes the pHealth domain, its conceptual part includes a description of the main roles and concerns of pHealth stakeholders, a model of the ICT artefacts that are commonly adopted and a model representing the typical data that need to be formalized among pHealth systems. The functional model includes a set of 18 scenarios, divided into assisted person's view, caregiver's view, developer's view, technology and services providers' view and authority's view, and a set of 52 Use Cases grouped in 6 categories: assisted person's activities, system reactions, caregiver's activities, user engagement, developer's activities and deployer's activities. For what concerns the validation of the model, a total of 65 people participated in the online survey providing their level of agreement in all the assessed dimensions and a total of 248 comments on how to improve and complete the model. Participants' background spanned from engineering and software development (70%) to medical specialities (15%), with declared interest in the fields of eHealth (24%), mHealth (16%), Ambient Assisted Living (21%), Personalized Medicine (5%), Personal Health Systems (15%), Medical Informatics (10%) and Biomedical Engineering (8%) with an average of 7.25_4.99 years of experience in these fields. From the analysis of the answers it is possible to observe that the contacted experts considered the model easily readable (average of 1.89_0.79 being 1 the most favourable scoring and 5 the worst), sufficiently abstract (1.99_0.88) and formal (2.13_0.77) for its purpose, with a sufficient coverage of the domain (2.26_0.95), useful for describing the domain (2.02_0.7) and for generating more specific systems (2_0.75) and they reported a partial interest in using the model in their job (2.48_0.91). Thanks to their comments, the model was improved and enriched with concepts that were missing at the beginning, nonetheless it was not possible to prove an improvement among the iterations, due to the diversity of the participants in the three rounds. From the model, a development platform for the pHealth domain was generated called pHealth Patient Platform (pHPP). The platform includes a set of libraries, programming and deployment tools, a tutorial and a sample application. The main four modules of the architecture are: the Data Collection Engine, which allows abstracting sources of information like sensors or external services, mapping data to databases and ontologies, and allowing event-based interaction and filtering, the GUI Engine, which abstracts the user interface in a message-like interaction model, the Workow Engine, which allows programming the application's user interaction ows with graphical workows, and the Rule Engine, which gives developers a simple means for programming the application's logic in the form of \if-then" rules. After the 5 years experience of HeartCycle, partially programmed with pHPP, 5 developers were joined in a focus group to discuss the advantages and drawbacks of the platform. The view that emerged from the training course and the focus group was that the platform is well-suited to the needs of the engineers working in the field, it allowed the separation of concerns among the different specialities and it simplified some common development tasks like data management and asynchronous interaction. Nevertheless, some deficiencies were pointed out in terms of a lack of maturity of some technological choices, and for the absence of some domain-specific tools, e.g. for data processing or for health-related communication protocols. Within HeartCycle, the platform was used to develop part of the Guided Exercise system, a composition of ICT tools for the physical rehabilitation of patients who suffered from myocardial infarction. The system developed using the platform was tested in a randomized controlled clinical trial, in which 55 patients used the system for 21 weeks. The technical results of this trial showed that the system was stable and reliable. Some minor bugs were detected, but these were promptly corrected using the platform. This shows that the platform, as well as facilitating the development task, can be successfully used to produce reliable software. Conclusions The research work carried out in developing this thesis provides responses to the three three research questions that were the motivation for the work. RQ1 A model was developed representing the domain of personalised health systems, and the assessment of experts in the field was that it represents the domain accurately, with an appropriate balance between abstraction and detail. RQ2 A development platform based on the model was successfully developed. RQ3 The platform has been shown to assist developers create complex pHealth software. This was demonstrated within the scope of one large-scale project, but the generic approach adopted provides indications that it would offer benefits more widely. The results of these evaluations provide indications that both the model and the platform are good candidates for being a reference for future pHealth developments.

AALUMO: a user model ontology for ambient assisted living services supported in next-generation networks

Ambient Assisted Living (AAL) services are emerging as context-awareness solutions to support elderly people?s autonomy. The context-aware paradigm makes applications more user-adaptive. In this way, context and user models expressed in ontologies are employed by applications to describe user and environment characteristics. The rapid advance of technology allows creating context server to relieve applications of context reasoning techniques. Specifically, the Next Generation Networks (NGN) provides by means of the presence service a framework to manage the current user's state as well as the user's profile information extracted from Internet and mobile context. This paper propose a user modeling ontology for AAL services which can be deployed in a NGN environment with the aim at adapting their functionalities to the elderly's context information and state.