Chemical speciation and mobilization of copper and zinc in naturally contaminated mine soils with citric and tartaric acids

A one-step extraction procedure and a leaching column experiment were performed to assess the effects of citric and tartaric acids on Cu and Zn mobilization in naturally contaminated mine soils to facilitate assisted phytoextraction. A speciation modeling of the soil solution and the metal fractionation of soils were performed to elucidate the chemical processes that affected metal desorption by organic acids. Different extracting solutions were prepared, all of which contained 0.01 M KNO3 and different concentrations of organic acids: control without organic acids, 0.5 mM citric, 0.5 mM tartaric, 10 mM citric, 10 mM tartaric, and 5 mM citric +5 mM tartaric. The results of the extraction procedure showed that higher concentrations of organic acids increased metal desorption, and citric acid was more effective at facilitating metal desorption than tartaric acid. Metal desorption was mainly influenced by the decreasing pH and the dissolution of Fe and Mn oxides, not by the formation of soluble metal–organic complexes as was predicted by the speciation modeling. The results of the column study reported that low concentrations of organic acids did not significantly increase metal mobilization and that higher doses were also not able to mobilize Zn. However, 5–10 mM citric acid significantly promoted Cu mobilization (from 1 mg kg−1 in the control to 42 mg kg−1 with 10 mM citric acid) and reduced the exchangeable (from 21 to 3 mg kg−1) and the Fe and Mn oxides (from 443 to 277 mg kg−1) fractions. Citric acid could efficiently facilitate assisted phytoextraction techniques.

Natural ventilation in underground wine cellars

The main objective of this research is to promote passive thermal design techniques in the construction of wineries. Natural ventilation in underground cellars is analyzed, focusing on the entrance tunnel, the ventilation chimney and the cave. A monitoring system was designed in order to detect changes in the indoor conditions and outdoor air infiltration. Monitoring process was carried out during one year. Results show the influence of outside temperature, ventilation chimney and access tunnel on the conditions inside the underground cellar. During hot periods, natural ventilation has a negligible influence on the indoor ambience, despite the permanently open vents in the door and chimney. The tunnel and ventilation chimney work as a temperature regulator, dampening outside fluctuations. Forced ventilation is necessary when a high air exchange ratio is needed. During cold periods, there is greater instability as a result of increased natural ventilation. The temperature differences along the tunnel are reduced, reflecting a homogenization and mixing of the air. The ventilation flow is sufficient to modify the temperature and relative humidity of the cave. Forced ventilation is not necessary in this period. During the intermediate periods --autumn and spring-- occurs different behaviors based on time of day.

CO2 Emission from two old mine drillings (Mt. Amiata, Central Italy) as a possible example of storage and leakage of deep-seated CO2

CO2 Emission from two old mine drillings (Mt. Amiata, Central Italy) as a possible example of storage and leakage of deep-seated CO2

Characterization of underground cellars in the Duero Basin by GNSS, LIDAR and GPR techniques

The underground cellars of the Duero River basin are part of spread and damaged agricultural landscape which is in danger of disappearing. These architectural complexes are allocated next to small towns. Constructions are mostly dug in the ground with a gallery down or "barrel" strait through which you access the cave or cellar. This wider space is used to make and store wine. Observation and detection of the winery both on the outside and underground is essential to make an inventory of the rural heritage. Geodetection is a non-invasive technique, suitable to determinate with precision buried structures in the ground. The undertaken works include LIDAR survey techniques, GNSS and GPR obtained data. The results are used to identify with centimetric precision construction elements forming the winery. Graphic and cartographic obtained documents allow optimum visualization of the studied field and can be used in the reconstruction of the place.

Underground dwellings in the Tajuña valley, Madrid, Spain and their bioclimatic adaptation

Underground dwellings are the maximum example of the vernacular architecture adaptation to the climatic conditions in areas with high annual and daily thermal fluctuations. This paper summarizes the systematic research about the energy performance of this popular architecture and their adaptation to the outdoor conditions in the case of the low area of the River Tajuña and its surroundings. Some considerations on their maintenance and renovation arise from the research.

Observation and Detection of Underground Cellars in the Duero Basin By GNSS, Lidar and Ground Penetrating Radar Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor. It is a unique architectural complex, facing rising, built on a smooth hillock as shown in Fig. 1. These constructions are excavated in the ground. The access to the cave or underground cellar has a shape of a narrow tube or down gallery. Immediately after, this space gets wider. There, wine is produced and stored [1]. Observation and detection of the underground cellar, both on the outside and underground, it is essential to make an inventory of the rural patrimony [2]. The geodetection is a noninvasive technique, adequate to accurately locate buried structures in the ground. Works undertaken include topographic work with the LIDAR techniques and integration with data obtained by GNSS and GPR.

Phytoextraction of heavy metals from mine soils using hyperaccumulator plants

The aim of this work was to study some hyperaccumulator species that could be useful to decontaminate mine soils and also to investigate the bioavailability and uptake of these metals by plants with the addition of organic amendments. Pot experiments were performed with soil samples collected from two mining areas in the north of Madrid, where there was an intense mining activity more than 50 years ago. Three species (Thlaspi arvense, Brassica juncea and Atriplex halimus) were grown under controlled conditions in pots filled with contaminated soils mixed with 0 Mg, 30 Mg and 60 Mg per hectare of two different organic amendments: a commercial compost made of pine bark, peat and wood fiber and other made of horse and sheep manure and wood fiber. Plants were harvested at the end of their crop cycle and were digested in order to measure metal concentration (Zn, Cu and Cd) in roots and shoots. Highest plant metal concentration was observed in pots treated with pine bark amendment and with pure soil due to an increase in metal bioavailability with decreasing pH. Also in those treatments the total plant biomass was lower, even some plants could not germinate. On the contrary, there was a lower metal concentration in plant tissues of pots with manure because its higher pH whereas plant growth was significantly larger so there was an incresing amount of metals removed from soil by plants. Comparing the three species results indicate a higher total metal uptake in A. halimus than B. juncea and T. arvense. In conclusion, results show that pH affects metal bioavailability and uptake by hyperaccumulator plants. Addition of organic amendments could be a successful technique for stabilization of metals in contaminated soils.

Effects of sheep and horse manure and pine bark amendments on metal distribution and chemical properties of contaminated mine soils.

Mine soils usually contain large levels of heavy metals and poor fertility conditions which limit their reclamation and the application of phyto-remediation technologies. Two organic waste materials (pine bark compost and sheep and horse manure compost), with different pHs and varying degrees of humification and nutrient contents, were applied as amendments to assess their effects on copper (Cu) and zinc (Zn) bioavailability and on fertility conditions of mine soils. Soil samples collected from two abandoned mining areas near Madrid (Spain) were mixed with 0, 30 and 60 t ha?1 of the organic amendments. The concentrations of metals among the different mineral and organic fractions of soil were determined by several extraction procedures to study the metal distribution in the solid phase of the soil affected by the organic amendments. The results showed that the manure amendment increased the soil pH and the cation exchange capacity and enhanced the nutrient levels of these soils. The pine bark amendment decreased the soil pH and did not significantly change the nutrient status of soil. Soil pH, organic matter content and its degree of humification, which were altered by the amendments, were the main factors affecting Cu fractionation. Zn fractionation was mainly affected by soil pH. The addition of manure not only improved soil fertility, but also decreased metal bioavailability resulting in a reduction of metal toxicity. Conversely, pine bark amendment increased metal ioavailability. The use of sheep and horse manure could be a cost-effective practice for the restoration of contaminated mine soils.

Phytostabilization of metals in mine soils using Brassica juncea in combination with organic amendments

Background and aims The high metal bioavailability and the poor conditions of mine soils yield a low plant biomass, limiting the application of phytoremediation techniques. A greenhouse experiment was performed to evaluate the effects of organic amendments on metal stabilization and the potential of Brassica juncea L. for phytostabilization in mine soils. Methods Plants were grown in pots filled with soils collected from two mine sites located in Central Spain mixed with 0, 30 and 60 tha?1 of pine bark compost and horse- and sheep-manure compost. Plant biomass and metal concentrations in roots and shoots were measured. Metal bioavailability was assessed using a rhizosphere-based method (rhizo), which consists of a mixture of low-molecular-weight organic acids to simulate root exudates. Results Manure reduced metal concentrations in shoots (10?50 % reduction of Cu and 40?80 % of Zn in comparison with non-amended soils), bioconcentration factor (10?50 % of Cu and 40?80 % of Zn) and metal bioavailability in soil (40?50 % of Cu and 10?30 % of Zn) due to the high pH and the contribution of organic matter. Manure improved soil fertility and was also able to increase plant biomass (5?20 times in shoots and 3?30 times in roots), which resulted in a greater amount of metals removed from soil and accumulated in roots (increase of 2?7 times of Cu and Zn). Plants grown in pine bark treatments and in non-amended soils showed a limited biomass and high metal concentrations in shoots. Conclusions The addition of manure could be effective for the stabilization of metals and for enhancing the phytostabilization ability of B. juncea in mine soils. In this study, this species resulted to be a potential candidate for phytostabilization in combination with manure, differing from previous results, in which B. juncea had been recognized as a phytoextraction plant.

Zonal plant communities of the Ribesalbes-Alcora basin (La Rinconada mine, eastern Spain) during the early Miocene

Zonal plant communities of the Ribesalbes-Alcora basin (La Rinconada mine, eastern Spain) during the early Miocene

Aplicación de la regresión logística en la predicción empírica de fenómenos complejos en obras subterráneas : squeezing y rotura de pilares de carbón

La heterogeneidad del medio geológico introduce en el proyecto de obra subterránea un alto grado de incertidumbre que debe ser debidamente gestionado a fin de reducir los riesgos asociados, que son fundamentalmente de tipo geotécnico. Entre los principales problemas a los que se enfrenta la Mecánica de Rocas moderna en el ámbito de la construcción subterránea, se encuentran la fluencia de roca en túneles (squeezing) y la rotura de pilares de carbón. Es ampliamente conocido que su aparición causa importantes perjuicios en el coste y la seguridad de los proyectos por lo que su estudio, ha estado tradicionalmente vinculado a la predicción de su ocurrencia. Entre las soluciones existentes para la determinación de estos problemas se encuentran las que se basan en métodos analíticos y numéricos. Estas metodologías son capaces de proporcionar un alto nivel de representatividad respecto del comportamiento geotécnico real, sin embargo, su utilización solo es posible cuando se dispone de una suficiente caracterización geotécnica y por tanto de una detallada definición de los parámetros que alimentan los complejos modelos constitutivos y criterios de rotura que los fenómenos estudiados requieren. Como es lógico, este nivel de definición solo es posible cuando se alcanzan etapas avanzadas de proyecto, incluso durante la propia construcción, a fin de calibrar adecuadamente los parámetros introducidos en los modelos, lo que supone una limitación de uso en etapas iniciales, cuando su predicción tiene verdadero sentido. Por su parte, los métodos empíricos permiten proporcionar soluciones a estos complejos problemas de un modo sencillo, con una baja parametrización y, dado su eminente enfoque observacional, de gran fiabilidad cuando se implementan sobre condiciones de contorno similares a las originales. La sencillez y escasez de los parámetros utilizados permiten a estas metodologías ser utilizadas desde las fases preliminares del proyecto, ya que estos constituyen en general, información habitual de fácil y económica adquisición. Este aspecto permite por tanto incorporar la predicción desde el principio del proceso de diseño, anticipando el riesgo en origen. En esta tesis doctoral, se presenta una nueva metodología empírica que sirve para proporcionar predicciones para la ocurrencia de squeezing y el fallo de pilares de carbón basada en una extensa recopilación de información de casos reales de túneles y minas en las que ambos fenómenos fueron evaluados. Esta información, recogida de referencias bibliográficas de prestigio, ha permitido recopilar una de las más extensas bases de datos existentes hasta la fecha relativa a estos fenómenos, lo que supone en sí mismo una importante contribución sobre el estado del arte. Con toda esta información, y con la ayuda de la teoría de clasificadores estadísticos, se ha implementado sobre las bases de datos un clasificador lineal de tipo regresión logística que permite hacer predicciones sobre la ocurrencia de ambos fenómenos en términos de probabilidad, y por tanto ponderar la incertidumbre asociada a la heterogeneidad incorporada por el medio geológico. Este aspecto del desarrollo es el verdadero valor añadido proporcionado por la tesis y la principal ventaja de la solución propuesta respecto de otras metodologías empíricas. Esta capacidad de ponderación probabilística permite al clasificador constituir una solución muy interesante como metodología para la evaluación de riesgo geotécnico y la toma de decisiones. De hecho, y como ejercicio de validación práctica, se ha implementado la solución desarrollada en un modelo coste-beneficio asociado a la optimización del diseño de pilares involucrados en una de mina “virtual” explotada por tajos largos. La capacidad del clasificador para cuantificar la probabilidad de fallo del diseño, junto con una adecuada cuantificación de las consecuencias de ese fallo, ha permitido definir una ley de riesgo que se ha incorporado al balance de costes y beneficios, que es capaz, a partir del redimensionamiento iterativo del sistema de pilares y de la propia configuración de la mina, maximizar el resultado económico del proyecto minero bajo unas condiciones de seguridad aceptables, fijadas de antemano. Geological media variability introduces to the subterranean project a high grade of uncertainty that should be properly managed with the aim to reduce the associated risks, which are mainly geotechnical. Among the major problems facing the modern Rock Mechanics in the field of underground construction are both, the rock squeezing while tunneling and the failure of coal pillars. Given their harmfulness to the cost and safety of the projects, their study has been traditionally linked to the determination of its occurrence. Among the existing solutions for the determination of these problems are those that are based on analytical and numerical methods. Those methodologies allow providing a high level of reliability of the geotechnical behavior, and therefore a detailed definition of the parameters that feed the complex constitutive models and failure criteria that require the studied phenomena. Obviously, this level of definition is only possible when advanced stages of the project are achieved and even during construction in order to properly calibrate the parameters entered in the models, which suppose a limited use in early stages, when the prediction has true sense. Meanwhile, empirical methods provide solutions to these complex problems in a simple way, with low parameterization and, given his observational scope, with highly reliability when implemented on similar conditions to the original context. The simplicity and scarcity of the parameters used allow these methodologies be applied in the early stages of the project, since that information should be commonly easy and cheaply to get. This aspect can therefore incorporate the prediction from the beginning of the design process, anticipating the risk beforehand. This thesis, based on the extensive data collection of case histories of tunnels and underground mines, presents a novel empirical approach used to provide predictions for the occurrence of both, squeezing and coal pillars failures. The information has been collected from prestigious references, providing one of the largest databases to date concerning phenomena, a fact which provides an important contribution to the state of the art. With all this information, and with the aid of the theory of statistical classifiers, it has been implemented on both databases, a type linear logistic regression classifier that allows predictions about the occurrence of these phenomena in terms of probability, and therefore weighting the uncertainty associated with geological variability. This aspect of the development is the real added value provided by the thesis and the main advantage of the proposed solution over other empirical methodologies. This probabilistic weighting capacity, allows being the classifier a very interesting methodology for the evaluation of geotechnical risk and decision making. In fact, in order to provide a practical validation, we have implemented the developed solution within a cost-benefit analysis associated with the optimization of the design of coal pillar systems involved in a "virtual" longwall mine. The ability of the classifier to quantify the probability of failure of the design along with proper quantification of the consequences of that failure, has allowed defining a risk law which is introduced into the cost-benefits model, which is able, from iterative resizing of the pillar system and the configuration of the mine, maximize the economic performance of the mining project under acceptable safety conditions established beforehand.

Characterization of Underground Cellars in the Duero Basin by GNSS, LIDAR and GPR Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor.

Assessment of Underground Wine Cellars Using Geographic Information Technologies

Geographic information technologies (GIT) are essential to many fields of research, such as the preservation and dissemination of cultural heritage buildings, a category which includes traditional underground wine cellars. This article presents a methodology based on research carried out on this type of rural heritage building. The data were acquired using the following sensors: EDM, total station, close-range photogrammetry and laser scanning, and subsequently processed with a specific software which was verified for each case, in order to obtain a satisfactory graphic representation of these underground wine cellars. Two key aspects of this work are the accuracy of the data processing and the visualization of these traditional constructions. The methodology includes an application for geovisualizing these traditional constructions on mobile devices in order to contribute to raising awareness of this unique heritage.

Guidelines of natural zeolites characterization for acid mine drainage treatment. Case study Guayaquil, Ecuador

Zeolites constitute one of the less common groups of tectosilicates. Zeoli1es with pores between -2 to 10 A in their structures have strong sorption capacity and are widely used in industrial and municipal operations to eliminate toxic substances. One of the major environmental problems in the mining activity is the treating of acid mine drainage. In this context, it is very important to search alternatives to manage this challenge. One feasible alternative is using zeolitic tuffs. The results of the physical-chemical characterization of zeolitic tuffs are the c1ue lo continue or not with deeper analysis and tests 01 acid mine drainage treatments. The guidelines to reach this purpose are the main goal of this work. Zeolite 1uff samples (named as XB_01 and XB_02) studied in this work were laken rn the Late Cretaceous Coastal Cayo Arch Ecuador, specifically in the Guaraguao River, showing the most important characteristics of heulandite zeolitic tuffs. X-ray powder diffraction (XRD) tests were developed in order to confirm that the samples belong to the heulandite-type zeoli1ic tuffs. Additionally, Thermogravimetric analysis (TG), Inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and X-ray fluorescence (XRF) of the samples was necessary in order to define the Si/Al ratio and the main mineralogical phases. The XB_01 sample shows a higher ratio Si/Al than XB_02 sample. The cation exchange capacity est was the fundamental step to define the potentiality of the zeolite to use in acid mine drainage treatment Three methodologies were employed to determine the cation exchange capacity. The Cuban standard 626 and the ammonium exchange methodologies reflect results more consistent with each other. This is the starting point to continue with deeper studies such as breakthrough curves for heavy metal ions found in acid mine waters.