Transverse galloping of two-dimensional bodies having a rhombic cross-section

Transverse galloping is a type of aeroelastic instability characterized by oscillations perpendicular to wind direction, large amplitude and low frequency, which appears in some elastic two-dimensional bluff bodies when they are subjected to an incident flow, provided that the flow velocity exceeds a threshold critical value. Understanding the galloping phenomenon of different cross-sectional geometries is important in a number of engineering applications: for energy harvesting applications the interest relies on strongly unstable configurations but in other cases the purpose is to avoid this type of aeroelastic phenomenon. In this paper the aim is to analyze the transverse galloping behavior of rhombic bodies to understand, on the one hand, the dependence of the instability with a geometrical parameter such as the relative thickness and, on the other hand, why this cross-section shape, that is generally unstable, shows a small range of relative thickness values where it is stable. Particularly, the non-galloping rhombus-shaped prism?s behavior is revised through wind tunnel experiments. The bodies are allowed to freely move perpendicularly to the incoming flow and the amplitude of movement and pressure distributions on the surfaces is measured.

Two-dimensional direct rainfall hydraulic models applied to direct calculation of hydrologic events in dams to prevent overtopping

One of the main concerns when conducting a dam test is the acute determination of the hydrograph for a specific flood event. The use of 2D direct rainfall hydraulic mathematical models on a finite elements mesh, combined with the efficiency of vector calculus that provides CUDA (Compute Unified Device Architecture) technology, enables nowadays the simulation of complex hydrological models without the need for terrain subbasin and transit splitting (as in HEC-HMS). Both the Spanish PNOA (National Plan of Aereal Orthophotography) Digital Terrain Model GRID with a 5 x 5 m accuracy and the CORINE GIS Land Cover (Coordination of INformation of the Environment) that allows assessment of the ground roughness, provide enough data to easily build these kind of models

On the two-dimensional theory of incompressible flow over inlets

The linearized solution for the two-dimensional flow over an inlet of general form has been derived, assuming incompressible potential flow. With this theory suction forces at sharp inlet lips can be estimated and ideal inlets can be designed.

Two-dimensional isostatic meshes in the finite element method

In a Finite Element (FE) analysis of elastic solids several items are usually considered, namely, type and shape of the elements, number of nodes per element, node positions, FE mesh, total number of degrees of freedom (dot) among others. In this paper a method to improve a given FE mesh used for a particular analysis is described. For the improvement criterion different objective functions have been chosen (Total potential energy and Average quadratic error) and the number of nodes and dof's of the new mesh remain constant and equal to the initial FE mesh. In order to find the mesh producing the minimum of the selected objective function the steepest descent gradient technique has been applied as optimization algorithm. However this efficient technique has the drawback that demands a large computation power. Extensive application of this methodology to different 2-D elasticity problems leads to the conclusion that isometric isostatic meshes (ii-meshes) produce better results than the standard reasonably initial regular meshes used in practice. This conclusion seems to be independent on the objective function used for comparison. These ii-meshes are obtained by placing FE nodes along the isostatic lines, i.e. curves tangent at each point to the principal direction lines of the elastic problem to be solved and they should be regularly spaced in order to build regular elements. That means ii-meshes are usually obtained by iteration, i.e. with the initial FE mesh the elastic analysis is carried out. By using the obtained results of this analysis the net of isostatic lines can be drawn and in a first trial an ii-mesh can be built. This first ii-mesh can be improved, if it necessary, by analyzing again the problem and generate after the FE analysis the new and improved ii-mesh. Typically, after two first tentative ii-meshes it is sufficient to produce good FE results from the elastic analysis. Several example of this procedure are presented.

Efficient photo-induced dielectrophoretic particle trapping on Fe:LiNbO3 for arbitrary two dimensional patterning

1D and 2D patterning of uncharged micro- and nanoparticles via dielectrophoretic forces on photovoltaic z-cut Fe:LiNbO3 have been investigated for the first time. The technique has been successfully applied with dielectric micro-particles of CaCO3 (diameter d = 1-3 ?m) and metal nanoparticles of Al (d = 70 nm). At difference with previous experiments in x- and y-cut, the obtained patterns locally reproduce the light distribution with high fidelity. A simple model is provided to analyse the trapping process. The results show the remarkably good capabilities of this geometry for high quality 2D light-induced dielectrophoretic patterning overcoming the important limitations presented by previous configurations.

Comparative study about the use of two and three-dimensional methods in surface finishing characterization

The increasing number of works related to the surface texture characterization based on 3D information, makes convenient rethinking traditional methods based on two-dimensional measurements from profiles. This work compares results between measurements obtained using two and three-dimensional methods. It uses three kinds of data sources: reference surfaces, randomly generated surfaces and measured. Preliminary results are presented. These results must be completed trying to cover a wider number of possibilities according to the manufacturing process and the measurement instrumentation since results can vary quite significantly between them.

Three-dimensional flow instability in a lid-driven isosceles triangular cavity

Linear three-dimensional modal instability of steady laminar two-dimensional states developing in a lid-driven cavity of isosceles triangular cross-section is investigated theoretically and experimentally for the case in which the equal sides form a rectangular corner. An asymmetric steady two-dimensional motion is driven by the steady motion of one of the equal sides. If the side moves away from the rectangular corner, a stationary three-dimensional instability is found. If the motion is directed towards the corner, the instability is oscillatory. The respective critical Reynolds numbers are identified both theoretically and experimentally. The neutral curves pertinent to the two configurations and the properties of the respective leading eigenmodes are documented and analogies to instabilities in rectangular lid-driven cavities are discussed.

Analytic design method for optimal imaging: coupling three ray sets using two free-form lens profiles

In this work, a new two-dimensional optics design method is proposed that enables the coupling of three ray sets with two lens surfaces. The method is especially important for optical systems designed for wide field of view and with clearly separated optical surfaces. Fermat’s principle is used to deduce a set of functional differential equations fully describing the entire optical system. The presented general analytic solution makes it possible to calculate the lens profiles. Ray tracing results for calculated 15th order Taylor polynomials describing the lens profiles demonstrate excellent imaging performance and the versatility of this new analytic design method.

Analytic free-form lens design in 3D: coupling three ray sets using two lens surfaces

The two-dimensional analytic optics design method presented in a previous paper [Opt. Express 20, 5576–5585 (2012)] is extended in this work to the three-dimensional case, enabling the coupling of three ray sets with two free-form lens surfaces. Fermat’s principle is used to deduce additional sets of functional differential equations which make it possible to calculate the lens surfaces. Ray tracing simulations demonstrate the excellent imaging performance of the resulting free-form lenses described by more than 100 coefficients.

Perfect imaging of three object points with only two analytic lens surfaces in two dimensions

In this work, a new two-dimensional analytic optics design method is presented that enables the coupling of three ray sets with two lens profiles. This method is particularly promising for optical systems designed for wide field of view and with clearly separated optical surfaces. However, this coupling can only be achieved if different ray sets will use different portions of the second lens profile. Based on a very basic example of a single thick lens, the Simultaneous Multiple Surfaces design method in two dimensions (SMS2D) will help to provide a better understanding of the practical implications on the design process by an increased lens thickness and a wider field of view. Fermat?s principle is used to deduce a set of functional differential equations fully describing the entire optical system. The transformation of these functional differential equations into an algebraic linear system of equations allows the successive calculation of the Taylor series coefficients up to an arbitrary order. The evaluation of the solution space reveals the wide range of possible lens configurations covered by this analytic design method. Ray tracing analysis for calculated 20th order Taylor polynomials demonstrate excellent performance and the versatility of this new analytical optics design concept.

Patrones y procesos espaciales en poblaciones y comunidades vegetales: nuevas herramientas e hipótesis

Generalmente los patrones espaciales de puntos en ecología, se definen en el espacio bi-dimensional, donde cada punto representado por el par ordenado (x,y), resume la ubicación espacial de una planta. La importancia de los patrones espaciales de plantas radica en que proceden como respuesta ante importantes procesos ecológicos asociados a la estructura de una población o comunidad. Tales procesos incluyen fenómenos como la dispersión de semillas, la competencia por recursos, la facilitación, respuesta de las plantas ante algún tipo de estrés, entre otros. En esta tesis se evalúan los factores y potenciales procesos subyacentes, que explican los patrones de distribución espacial de la biodiversidad vegetal en diferentes ecosistemas como bosque mediterráneo, bosque tropical y matorral seco tropical; haciendo uso de nuevas metodologías para comprobar hipótesis relacionadas a los procesos espaciales. En este trabajo se utilizaron dos niveles ecológicos para analizar los procesos espaciales, el nivel de población y el nivel de comunidad, con el fin de evaluar la importancia relativa de las interacciones intraespecíficas e interespecíficas. Me centré en el uso de funciones estadísticas que resumen los patrones de puntos para explorar y hacer inferencias a partir de datos espaciales, empezando con la construcción de un nuevo modelo nulo para inferir variantes del síndrome de dispersión de una planta parásita en España central. Se analizó la dependencia de los patrones espaciales tanto de los hospedantes afectados como de los no-afectados y se observó fuerte dependencia a pequeña y mediana distancia. Se utilizaron dos funciones (kernel) para simular la dispersión de la especie parásita y se identificó consistencia de estos modelos con otros síndromes de dispersión adicionalmente a la autodispersión. Un segundo tema consistió en desarrollar un método ANOVA de dos vías? para patrones de puntos replicados donde el interés se concentró en evaluar la interacción de dos factores. Este método se aplicó a un caso de estudio que consitió en analizar la influencia de la topografía y la altitud sobre el patrón espacial de un arbusto dominante en matorral seco al sur del Ecuador, cuyos datos provienen de patrones de puntos replicados basados en diseño. Partiendo de una metodología desarrollada para procesos uni-factoriales, se construyó el método para procesos bi-factoriales y así poder evaluar el efecto de interacción. Se observó que la topografía por sí sola así como la interacción con la altitud presentaron efecto significativo sobre la formación del patrón espacial. Un tercer tema fue identificar la relación entre el patrón espacial y el síndrome de dispersión de la comunidad vegetal en el bosque tropical de la Isla de Barro Colorado (BCI), Panamá. Muchos estudios se han desarrollado en este bosque tropical y algunos han analizado la relación síndrome-patrón espacial, sin embargo lo novedoso de nuestro estudio es que se evaluaron un conjunto amplio de modelos (114 modelos) basados en procesos que incorporan la limitación de la dispersión y la heterogeneidad ambiental, y evalúan el efecto único y el efecto conjunto, para posteriormente seleccionar el modelo de mejor ajuste para cada especie. Más de la mitad de las especies presentaron patrón espacial consistente con el efecto conjutno de la limitación de la dispersión y heterogeneidad ambiental y el porcentaje restante de especies reveló en forma equitativa el efecto único de la heterogeneidad ambiental y efecto único de limitación de la dispersión. Finalmente, con la misma información del bosque tropical de BCI, y para entender las relaciones que subyacen para mantener el equilibrio de la biodiversidad, se desarrolló un índice de dispersión funcional local a nivel de individuo, que permita relacionar el patrón espacial con cuatro rasgos funcionales clave de las especies. Pese a que muchos estudios realizados involucran esta comunidad con la teoría neutral, se encontró que el ensamble de la comunidad de BCI está afectado por limitaciones de similaridad y de hábitat a diferentes escalas. ABSTRACT Overall the spatial point patterns in ecology are defined in two-dimensional space, where each point denoted by the (x,y) ordered pair, summarizes the spatial location of a plant. The spatial point patterns are essential because they arise in response to important ecological processes, associated with the structure of a population or community. Such processes include phenomena as seed dispersal, competition for resources, facilitation, and plant response to some type of stress, among others. In this thesis, some factors and potential underlying processes were evaluated in order to explain the spatial distribution patterns of plant biodiversity. It was done in different ecosystems such as Mediterranean forest, tropical forest and dry scrubland. For this purpose new methodologies were used to test hypothesis related to spatial processes. Two ecological levels were used to analyze the spatial processes, at population and community levels, in order to assess the relative importance of intraspecific and interspecific interactions. I focused on the use of spatial statistical functions to summarize point patterns to explore and make inferences from spatial data, starting with the construction of a new null model to infer variations about the dispersal syndrome of a parasitic plant in central Spain. Spatial dependence between point patterns in a multivariate point process of affected and unaffected hosts were analyzed and strong dependence was observed at small and medium distance. Two kernel functions were used to simulate the dispersion of parasitic plant and consistency of these models with other syndromes was identified, in addition to ballistic dispersion. A second issue was to analyze altitude and topography effects on the spatial population structure of a dominant shrub in the dry ecosystem in southern Ecuador, whose data come from replicated point patterns design-based. Based on a methodology developed for uni-factorial process, a method for bi-factorial processes was built to assess the interaction effect. The topography alone and interacting with altitude showed significant effect on the spatial pattern of shrub. A third issue was to identify the relationship between the spatial pattern and dispersal syndromes of plant community in the tropical forest of Barro Colorado Island (BCI), Panamá. Several studies have been developed in this tropical forest and some focused on the spatial pattern-syndrome relationship; however the novelty of our study is that a large set of models (114 models) including dispersal limitation and environmental heterogeneity were evaluated, used to identify the only and joint effect to subsequently select the best fit model for each species. Slightly more than fifty percent of the species showed spatial pattern consistent with only the dispersal limitation, and the remaining percentage of species revealed the only effect of environmental heterogeneity and habitat-dispersal limitation joined effect, equitably. Finally, with the same information from the tropical forest of BCI, and to understand the relationships underlying for balance of biodiversity, an index of the local functional dispersion was developed at the individual level, to relate the spatial pattern with four key functional traits of species. Although many studies involve this community with neutral theory, the assembly of the community is affected by similarity and habitat limitations at different scales.

Global instability analysis and control of three-dimensional long open cavity flow

The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.