Desarrollo de un sistema basado en el conocimiento para la definición de líneas de montaje aeronáuticas en la fase conceptual : Aplicación a una aeroestructura aeronáutica

La presente Tesis persigue la definición y el desarrollo de un sistema basado en el conocimiento que permita la generación de modelos de líneas de montaje durante la fase conceptual de definición de una aeroestructura aeronáutica. Para ello, se propone la definición de un modelo formal del proceso en concurrencia asociado al diseño de líneas de montaje en la fase conceptual, y de un modelo de la estructura de datos básica para soportar dicho proceso. Ambos modelos sirven de base para el desarrollo de una aplicación de prueba de concepto en el entorno del sistema comercial CAX-PLM CATIA v5. Los modelos de línea generados integran las tres estructuras básicas definidas en el modelo propuesto: producto, procesos y recursos. Los modelos generados son estructuras “de montaje”, basadas en estructuras de producto “de fabricación” a su vez derivadas de estructuras “de diseño”. Cada modelo generado se evalúa en términos de cuatro estimaciones básicas: dimensiones máximas del nodo producto, distancia de transporte y medio a utilizar, tiempo total de ejecución y coste total. La generación de modelos de línea de montaje se realiza en concurrencia con la función diseño de producto, teniendo por tanto la oportunidad de influir en la misma e incluir requerimientos de fabricación y montaje al producto en las primeras fases de su ciclo de vida, lo que proporciona una clara ventaja competitiva. El desarrollo propuesto en esta Tesis permite sentar las bases para realizar desarrollos con objeto de asistir a los diseñadores durante la fase conceptual de generación de diseños de líneas de montaje. La aplicación prototipo desarrollada demuestra la viabilidad de la propuesta conceptual que se realiza en la Tesis. ABSTRACT The current thesis proposes the definition and development of a knowledge-based system to generate aircraft components assembly line models during the conceptual phase of the product life cycle. With this objective, the definition of a formal activity model to represent the design of assembly lines during the conceptual phase is proposed; such model considers the concurrence with the product design process. Associated to the activity model, a data structure model is defined to support such process. Both models are the basis for the development of a proof of concept application within the environment of the commercial CAX-PLM system CATIA v5. The generated assembly line models integrate the three basic structures defined in the proposed model: product, processes and resources. The generated models are “As Prepared” structures based on “As Planned” structures derived from “As Designed” structures. Each generated model is evaluated in terms of four basic estimates: maximum dimensions of the product node, transport distance and transport mean to be used, total execution time and total cost. The assembly line models generation is made in concurrence with the product design function. Therefore, it provides the opportunity to influence on it and allows including manufacturing and assembly requirements early in the product life cycle, which gives a clear competitive advantage. The development proposed in this Thesis allows setting the foundation to carry out further developments with the aim of assisting designers during the conceptual phase of the assembly line design process. The developed prototype application shows the feasibility of the conceptual proposal presented in the Thesis.

Typological/Placement possibilities and limitations of ductile behavior of bridges in seismic areas

Consideraciones sobre la ductilidad en zonas sísmicas. This paper analyses the ductile behavior of a highway overpass located in a seismic zone. The paper presents the results of a pushover analysis that enables the design engineer to estimate the behavior of the bridge’s columns in two directions in an independent manner. The differences with the theoretical bilinear behavior are described and explained. Indications are given on the need and possibilities of taking advantage of ductility in different seismic events scenarios.

Evaluación de los co-beneficios sobre el desarrollo sostenible y la reducción de la pobreza de proyectos de mitigación del cambio climático en Brasil

El cambio climático y los diferentes aspectos del concepto de “desarrollo” están intrínsecamente interconectados. Por un lado, el desarrollo económico de nuestras sociedades ha contribuido a un aumento insostenible de las emisiones de gases de efecto invernadero, las cuales están desestabilizando el sistema climático global, generando al mismo tiempo una distribución desigual de la capacidad de las personas para hacer frente a estos cambios. Por otro lado, en la actualidad existe un amplio consenso sobre que el cambio climático impacta directamente y de manera negativa sobre el denominando desarrollo sostenible. De igual manera, cada vez existe un mayor consenso de que el cambio climático va a desafiar sustancialmente nuestra capacidad de erradicar la pobreza a medio y largo plazo. Ante esta realidad, no cabe duda de que las estrategias de adaptación son esenciales para mantener el desarrollo. Es por esto que hasta el momento, los mayores esfuerzos realizados por unir las agendas globales de la lucha contra la pobreza y del cambio climático se han dado en el entorno de la adaptación al cambio climático. Sin embargo, cada vez son más los actores que defienden, desde distintos escenarios, que existen sinergias entre la mitigación de emisiones y la mejora de las condiciones de vida de las poblaciones más vulnerables, favoreciendo así un “desarrollo sostenible” sin disminuir los recursos financieros destinados a la adaptación. Para hacer efectivo este potencial, es imprescindible identificar diseños de estrategias de mitigación que incrementen los resultados de desarrollo, contribuyendo al desarrollo sostenible al mismo tiempo que a reducir la pobreza. En este contexto se sitúa el objetivo principal de esta investigación, consistente en analizar los co-beneficios locales, para el desarrollo sostenible y la reducción la pobreza, de proyectos de mitigación del cambio climático que se implementan en Brasil. Por co-beneficios se entienden, en el lenguaje de las discusiones internacionales de cambio climático, aquellos beneficios que van más allá de la reducción de emisiones de Gases de Efecto Invernadero (GEI) intrínsecas por definición a los proyectos de mitigación. Los proyectos de mitigación más relevantes hasta el momento bajo el paraguas de la Convención Marco de las Naciones Unidas para el Cambio Climático (CMNUCC), son los denominados Mecanismos de Desarrollo Limpio (MDL) del Protocolo de Kioto. Sin embargo, existen alternativas de proyectos de mitigación (tales como los denominados “estándares adicionales” a los MDL de los Mercados Voluntarios de Carbono y las Tecnologías Sociales), que también serán tenidos en cuenta en el marco de este estudio. La elección del tema se justifica por la relevancia del mismo en un momento histórico en el que se está decidiendo el futuro del régimen climático a partir del año 2020. Aunque en el momento de redactar este documento, todavía no se ha acordado la forma que tendrán los futuros instrumentos de mitigación, sí que se sabe que los co-beneficios de estos instrumentos serán tan importantes, o incluso más, que las reducciones de GEI que generan. Esto se debe, principalmente, a las presiones realizadas en las negociaciones climáticas por parte de los países menos desarrollados, para los cuales el mayor incentivo de formar parte de dichas negociaciones se basa principalmente en estos potenciales co-beneficios. Los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo están contribuyendo los MDL implementados en Brasil a generar co-beneficios que fomenten el desarrollo sostenible y reduzcan la pobreza?; ¿existen proyectos de mitigación en Brasil que por tener compromisos más exigentes en cuanto a su contribución al desarrollo sostenible y/o la reducción de la pobreza que los MDL estén siendo más eficientes que estos en relación a los co-beneficios que generan?; y ¿qué características de los proyectos de mitigación pueden resultar críticas para potenciar sus co-beneficios en las comunidades en las que se implementan? Para dar respuesta a estas preguntas, se ha desarrollado durante cuatro años una labor de investigación estructurada en varias fases y en la que se combinan diversas metodologías, que abarcan desde el desarrollo de un modelo de análisis de cobeneficios, hasta la aplicación del mismo tanto a nivel documental sobre 194 documentos de diseño de proyecto (denominado análisis ex-ante), como a través de 20 casos de estudio (denominado análisis ex-post). Con la realización de esta investigación, se ha confirmado que los requisitos existentes hasta el momento para registrar un proyecto como MDL bajo la CMNUCC no favorecen sustancialmente la generación de co-beneficios locales para las comunidades en las que se implementan. Adicionalmente, se han identificado prácticas y factores, que vinculadas a las actividades intrínsecas de los proyectos de mitigación, son efectivas para incrementar sus co-beneficios. Estas prácticas y factores podrán ser tenidas en cuenta tanto para mejorar los requisitos de los actuales proyectos MDL, como para apoyar la definición de los nuevos instrumentos climáticos. ABSTRACT Climate change and development are inextricably linked. On the one hand, the economic development of our societies has contributed to the unsustainable increase of Green House Gases emissions, which are destabilizing the global climate system while fostering an unequal distribution of people´s ability to cope with these changes. On the other hand, there is now a consensus that climate change directly impacts the so-called sustainable development. Likely, there is a growing agreement that climate change will substantially threaten our capacity to eradicate poverty in the medium and long term. Given this reality, there is no doubt that adaptation strategies are essentials to keep development. This is why, to date, much of the focus on poverty in the context of climate change has been on adaptation However, without diverting resources from adaptation, there may exist the potential to synergize efforts to mitigate emissions, contribute to sustainable development and reduce poverty. To fulfil this potential, it is key identifying how mitigation strategies can also support sustainable development and reduce poverty. In this context, the main purpose of this investigation is to explore the co-benefits, for sustainable development and for poverty reduction, of climate change mitigation projects being implemented in Brazil. In recent years the term co-benefits, has been used by policy makers and academics to refer the potentially large and diverse range of collateral benefits that can be associated with climate change mitigation policies in addition to the direct avoided climate impact benefits. The most relevant mitigation projects developed during the last years under the United Nations Framework Convention on Climate Change (UNFCCC) are the so-called Clean Development Mechanisms (CDM) of the Kyoto Protocol. Thus, this research will analyse this official mechanism. However, there are alternatives to the mitigation projects (such as the "add-on standards" of the Voluntary Carbon Markets, and the Social Technologies) that will also be assessed as part of the research. The selection of this research theme is justified because its relevance in a historic moment in which proposals for a future climate regime after 2020 are being negotiated. Although at the moment of writing this document, there is not a common understanding on the shape of the new mitigation instruments, there is a great agreement about the importance of the co-benefits of such instruments, which may be even more important for the Least Developed Countries that their expected greenhouse gases emissions reductions. The results of the thesis are structured around three research questions: how are the CDM projects being implemented in Brazil generating local co-benefits that foster sustainable development and poverty reduction?; are other mitigation projects in Brazil that due to their more stringent sustainable development and/o poverty reduction criteria, any more successful at delivering co-benefits than regular CDM projects?; and what are the distinguishing characteristics of mitigation projects that are successful at delivering co-benefits? To answer these research questions, during four years it has been developed a research work structured in several phases and combining various methodologies. Those methodologies cover from the development of a co-benefits assessment model, to the application of such model both to a desktop analysis of 194 project design documents, and to 20 case studies using field data based on site visits to the project sites. With the completion of this research, it has been confirmed that current requirements to register a CDM project under the UNFCCC not substantially favour co-benefits at the local level. In addition, some practices and factors enablers of co-benefits have been identified. These characteristics may be taken into consideration to improve the current CDM and to support the definition of the new international market mechanisms for climate mitigation.

Desarrollo de un sistema interactivo de procesado de una colección de documentos para clasificarlos en base a su temática

A día de hoy, existen millones de artículos en internet que tratan sobre diferentes temas. Los investigadores hacen búsquedas exhaustivas para encontrar aquellos artículos que encuentran más importantes, los cuales se van descargando en su ordenador llegando a tal extremo que la cantidad de documentos que pueden llegar a tener se vuelve casi inmanejable. El proyecto Calimaco, el cual se está llevando a cabo en el Laboratorio Decoroso Crespo, busca dar soporte a la tarea de búsqueda de información en el ámbito de la investigación, donde la cantidad de información existente es abrumadora. El objetivo es generar una visualización tridimensional de una serie de documentos (corpus), de manera que el usuario pueda explorarlo fácilmente. Además se pretende que dicho proceso se adapte a las necesidades y características particulares del usuario. Esto puede resultar muy útil cuando, por ejemplo, un investigador desea buscar información acerca de un determinado tema dentro de todos sus documentos, ya que el sistema los clasificará en base a dichos temas, permitiéndole acceder a la información relevante de manera rápida y sencilla. La división de este proyecto se compone de dos partes: la primera se corresponde al preprocesamiento de los documentos, mientras que la segunda se encarga de la visualización de los resultados, además de la interactuación del usuario. El trabajo realizado expuesto en esta memoria se sitúa dentro de la parte de preprocesamiento del proyecto Calimaco. La aportación a este proyecto ha consistido en la realización de pruebas y análisis de los resultados, diseño e implementación de una base de datos, e integración de ambas partes, creando una primera versión del sistema. Para comprobar el funcionamiento de esta primera versión se diseñó un plan de pruebas del sistema para medir el tiempo y la precisión.---ABSTRACT---Nowadays, there are millions of articles on the Internet that deal with different topics. Researchers do exhaustive searches to find those articles that are more important for them and download them to their computer, sometimes, reaching a point where the amount of downloaded documents is unmanageable. Calimaco project, which is being carried out at Laboratorio Decoroso Crespo, aims to provide a solution in the task of searching information in terms of investigation, where the amount of information is overwhelming. The goal is to create a tridimensional vision of a set of documents (corpus), so that the user can explore it easily. In addition, this process is intended to adapt to the personal needs and characteristics of the user. This can turn out to be useful when, for example, a researcher wants to seek information about a specific subject inside all his documents, because the system will classify them by subjects, allowing to access relevant information in a fast and easy way. This project is formed by two big sections: the first one corresponds to the pre-process of documents, while the second one is in charge of result visualization as well as the interaction with the user. This memory contains the explanation of the job done in the first part of the Calimaco project, which belongs to the pre-process of documents. The contributions done to the project are: development of tests and analysis of results, a design and implementation of a database, and an integration of both parts (pre-process of documents and result visualization) creating a first version of the system. To test the functioning of this first version, the author created a system test plan in order to gather information about execution time and accuracy.

Introducción a la informática para estudiantes de enseñanza secundaria mediante programación de aplicaciones móviles

Este trabajo contiene el diseño y análisis de dos modalidades de docencia de programación de aplicaciones móviles, con el objetivo de aumentar el interés de los estudiantes de enseñanza secundaria por la Ingeniería Informática. Primeramente se analizó la estructura y el contenido de las diferentes materias relacionadas con la informática que existen actualmente en la educación secundaria en España, con el fin de localizar las carencias del currículo. Estas carencias principales son: la falta de reconocimiento de la Ingeniería informática al mismo nivel que el resto de ingenierías y una falta de contenidos relacionados con el desarrollo de software, tanto a nivel de programación como de diseño. A continuación, una vez analizados diferentes posibilidades de entornos con los que desarrollar dichos cursos, se diseñaron los dos modelos de docencia utilizando App Inventor como herramienta conductora, con los que poder cubrir esos conocimientos. El primer modelo consiste en un curso de cuatro semanas a impartir directamente en el centro, mientras que el segundo se trata de un taller de una mañana a impartir en la Escuela Técnica Superior de Ingenieros Informáticos de la Universidad Politécnica de Madrid. De los resultados de esos modelos se han obtenidos resultados muy positivos en cuanto al incremento de los conocimientos de los alumnos sobre informática, además de aumentar su interés por la Ingeniería Informática y obtener una visión más ajustada a la realidad de la misma.---ABSTRACT---This work details the design and realization of a workshop and a course for teaching mobile application programming to Spanish high school students, with the aim of increasing their interest in Computing. In order to locate the shortcomings of the curriculum, the structure and contents of various subjects related to Computing in currently secondary education in Spain were analyzed. The results show a lack of recognition of computer engineering at the same level as the rest of engineering disciplines and a lack of content related to software development, both in terms of programming and design. Then, after analyzing existing programming environments available for covering the basic programming objectives, App Inventor was chosen as mobile programming environment for both teaching activities (the workshop and the course). The first activity consists of a four-week course to teach directly in the high school, while the second one is a 4-hour workshop to be held at the university. The workshop and the course were carried out with students of two secondary schools, obtaining very positive results in terms of increasing students’ knowledge about computers, increasing their interest in Computing, and making them get a more accurate vision of the discipline.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CFD)para el desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Propulsion Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este proyecto es recoger y explicar el conjunto de tareas realizadas durante el proceso de colaboración llevado a cabo en el Instituto de Microgravedad “Ignacio Da Riva” durante el curso académico 2014/2015, las cuales han conformado las prácticas externas cursadas en la titulación de Grado en Ingeniería Aeroespacial, y el Trabajo de Fin de Grado de la misma titulación. En este documento se pretende,además, poner de manifiesto la rigurosidad con la que se trabaja en el ámbito espacial y la importancia de los protocolos y procedimientos para asegurar un resultado adecuado en los trabajos realizados. Una parte importante del proyecto detalla los procesos de monitorización y mantenimiento de la batería del satélite universitario UPMSat-2 cuyo lanzamiento está previsto para el año próximo y el cual será el segundo satélite del mundo en incorporar una batería de Ión-Litio.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El presente proyecto se ha realizado durante las prácticas curriculares que han tenido lugar en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM). A lo largo de estas prácticas se han llevado a cabo trabajos en diversos campos, todos relacionados con el UPMSat-2, desde el subsistema de potencia (placas solares y baterías) hasta el desarrollo de módulos para la Sala de Diseño Concurrente (Concurrent Design Facility, CDF). En la realización de las mismas se ha trabajado en equipo, junto con otros dos alumnos. El objetivo del proyecto es recopilar las tareas realizadas, proporcionando el desarrollo teórico necesario para llevar a cabo todas ellas. Al ser un trabajo con varias partes claramente diferenciadas, se ha optado por comenzar con unas páginas dedicadas a las misiones espaciales. A continuación el trabajo se adentra en el subsistema de potencia de un satélite, particularizando para el UPMSat-2. Finalmente, se proporciona la teoría necesaria para el desarrollo del módulo de misión de la CDF del IDR/UPM, software que se ha desarrollado y tiene reservado un espacio al final, en el cual se describe el programa y se realizan comparaciones de los resultados que proporciona frente a casos reales.

Análisis en sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este trabajo de fin de grado es la exposición de los resultados y conclusiones, fruto de las tareas desarrolladas durante las practicas curriculares en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM) el presente curso académico. La estructura del trabajo se compone de dos bloques diferenciados entre sí: el seguimiento de una batería y el desarrollo de un módulo para una CDF.

Integration of design tools and knowledge capture into a CAD system: a case study

onceptual design phase is partially supported by product lifecycle management/computer-aided design (PLM/CAD) systems causing discontinuity of the design information flow: customer needs — functional requirements — key characteristics — design parameters (DPs) — geometric DPs. Aiming to address this issue, it is proposed a knowledge-based approach is proposed to integrate quality function deployment, failure mode and effects analysis, and axiomatic design into a commercial PLM/CAD system. A case study, main subject of this article, was carried out to validate the proposed process, to evaluate, by a pilot development, how the commercial PLM/CAD modules and application programming interface could support the information flow, and based on the pilot scheme results to propose a full development framework.

Approach to integrate product conceptual design information into a computer-aided design system

Commercial computer-aided design systems support the geometric definition of product, but they lack utilities to support initial design stages. Typical tasks such as customer need capture, functional requirement formalization, or design parameter definition are conducted in applications that, for instance, support ?quality function deployment? and ?failure modes and effects analysis? techniques. Such applications are noninteroperable with the computer-aided design systems, leading to discontinuous design information flows. This study addresses this issue and proposes a method to enhance the integration of design information generated in the early design stages into a commercial computer-aided design system. To demonstrate the feasibility of the approach adopted, a prototype application was developed and two case studies were executed.

Development of Efficient Techniques for the Analysis and Design of Antennas in Dual-Reflectarray Configuration

This thesis contributes to the analysis and design of printed reflectarray antennas. The main part of the work is focused on the analysis of dual offset antennas comprising two reflectarray surfaces, one of them acts as sub-reflector and the second one acts as mainreflector. These configurations introduce additional complexity in several aspects respect to conventional dual offset reflectors, however they present a lot of degrees of freedom that can be used to improve the electrical performance of the antenna. The thesis is organized in four parts: the development of an analysis technique for dualreflectarray antennas, a preliminary validation of such methodology using equivalent reflector systems as reference antennas, a more rigorous validation of the software tool by manufacturing and testing a dual-reflectarray antenna demonstrator and the practical design of dual-reflectarray systems for some applications that show the potential of these kind of configurations to scan the beam and to generate contoured beams. In the first part, a general tool has been implemented to analyze high gain antennas which are constructed of two flat reflectarray structures. The classic reflectarray analysis based on MoM under local periodicity assumption is used for both sub and main reflectarrays, taking into account the incident angle on each reflectarray element. The incident field on the main reflectarray is computed taking into account the field radiated by all the elements on the sub-reflectarray.. Two approaches have been developed, one which employs a simple approximation to reduce the computer run time, and the other which does not, but offers in many cases, improved accuracy. The approximation is based on computing the reflected field on each element on the main reflectarray only once for all the fields radiated by the sub-reflectarray elements, assuming that the response will be the same because the only difference is a small variation on the angle of incidence. This approximation is very accurate when the reflectarray elements on the main reflectarray show a relatively small sensitivity to the angle of incidence. An extension of the analysis technique has been implemented to study dual-reflectarray antennas comprising a main reflectarray printed on a parabolic surface, or in general in a curved surface. In many applications of dual-reflectarray configurations, the reflectarray elements are in the near field of the feed-horn. To consider the near field radiated by the horn, the incident field on each reflectarray element is computed using a spherical mode expansion. In this region, the angles of incidence are moderately wide, and they are considered in the analysis of the reflectarray to better calculate the actual incident field on the sub-reflectarray elements. This technique increases the accuracy for the prediction of co- and cross-polar patterns and antenna gain respect to the case of using ideal feed models. In the second part, as a preliminary validation, the proposed analysis method has been used to design a dual-reflectarray antenna that emulates previous dual-reflector antennas in Ku and W-bands including a reflectarray as subreflector. The results for the dualreflectarray antenna compare very well with those of the parabolic reflector and reflectarray subreflector; radiation patterns, antenna gain and efficiency are practically the same when the main parabolic reflector is substituted by a flat reflectarray. The results show that the gain is only reduced by a few tenths of a dB as a result of the ohmic losses in the reflectarray. The phase adjustment on two surfaces provided by the dual-reflectarray configuration can be used to improve the antenna performance in some applications requiring multiple beams, beam scanning or shaped beams. Third, a very challenging dual-reflectarray antenna demonstrator has been designed, manufactured and tested for a more rigorous validation of the analysis technique presented. The proposed antenna configuration has the feed, the sub-reflectarray and the main-reflectarray in the near field one to each other, so that the conventional far field approximations are not suitable for the analysis of such antenna. This geometry is used as benchmarking for the proposed analysis tool in very stringent conditions. Some aspects of the proposed analysis technique that allow improving the accuracy of the analysis are also discussed. These improvements include a novel method to reduce the inherent cross polarization which is introduced mainly from grounded patch arrays. It has been checked that cross polarization in offset reflectarrays can be significantly reduced by properly adjusting the patch dimensions in the reflectarray in order to produce an overall cancellation of the cross-polarization. The dimensions of the patches are adjusted in order not only to provide the required phase-distribution to shape the beam, but also to exploit the crosses by zero of the cross-polarization components. The last part of the thesis deals with direct applications of the technique described. The technique presented is directly applicable to the design of contoured beam antennas for DBS applications, where the requirements of cross-polarisation are very stringent. The beam shaping is achieved by synthesithing the phase distribution on the main reflectarray while the sub-reflectarray emulates an equivalent hyperbolic subreflector. Dual-reflectarray antennas present also the ability to scan the beam over small angles about boresight. Two possible architectures for a Ku-band antenna are also described based on a dual planar reflectarray configuration that provides electronic beam scanning in a limited angular range. In the first architecture, the beam scanning is achieved by introducing a phase-control in the elements of the sub-reflectarray and the mainreflectarray is passive. A second alternative is also studied, in which the beam scanning is produced using 1-bit control on the main reflectarray, while a passive subreflectarray is designed to provide a large focal distance within a compact configuration. The system aims to develop a solution for bi-directional satellite links for emergency communications. In both proposed architectures, the objective is to provide a compact optics and simplicity to be folded and deployed.

Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

Systematic Analysis of Direct-Drive Baseline Designs for Shock-Ignition with the Laser Megajoule

Direct-drive inertial confinement thermonuclear fusion consists in illuminating a shell of cryogenic Deuterium and Tritium (DT) mixture with many intense beams of laser light. Capsule is composed of DT gassurrounded by cryogenic DT as combustible fuel. Basic rules are used to define shell geometry from aspect ratio, fuel mass and layers densities. We define baseline designs using two aspect ratio (A=3 and A=5) who complete HiPER baseline design (A=7.7). Aspect ratio is defined as the ratio of ice DT shell inner radius over DT shell thickness. Low aspect ratio improves hydrodynamics stabilities of imploding shell. Laser impulsion shape and ablator thickness are initially defined by using Lindl (1995) pressure ablation and mass ablation formulae for direct-drive using CH layer as ablator. In flight adiabat parameter is close to one during implosion. Velocitie simplosions chosen are between 260 km/s and 365 km/s. More than thousand calculations are realized for each aspect ratio in order to optimize the laser pulse shape. Calculations are performed using the one-dimensional version of the Lagrangian radiation hydrodynamics FCI2. We choose implosion velocities for each initial aspect ratio, and we compute scaled-target family curves for each one to find self-ignition threshold. Then, we pick points on each curves that potentially product high thermonuclear gain and compute shock ignition in the context of Laser MegaJoule. This systematic analyze reveals many working points which complete previous studies ´allowing to highlight baseline designs, according to laser intensity and energy, combustible mass and initial aspect ratio to be relevant for Laser MegaJoule.

Analysis of internal helically finned tubes for parabolic trough design by CFD tools

This paper has analysed the effect of the utilization of internal finned tubes for the design of parabolic trough collectors with computational fluid dynamics tools. Our numerical approach has been qualified with the computational estimation of reported experimental data regarding phenomena involved in finned tube applications and solar irradiation of parabolic trough collector. The application of finned tubes to the design of parabolic trough collectors must take into account features as the pressure losses, thermal losses and thermo-mechanical stress and thermal fatigue. Our analysis shows an improvement potential in parabolic trough solar plants efficiency by the application of internal finned tubes.

Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.