Estimation of a probability in inverse binomial sampling under normalized linear-linear and inverse-linear loss

Sequential estimation of the success probability p in inverse binomial sampling is considered in this paper. For any estimator pˆ , its quality is measured by the risk associated with normalized loss functions of linear-linear or inverse-linear form. These functions are possibly asymmetric, with arbitrary slope parameters a and b for pˆ

p , respectively. Interest in these functions is motivated by their significance and potential uses, which are briefly discussed. Estimators are given for which the risk has an asymptotic value as p→0, and which guarantee that, for any p∈(0,1), the risk is lower than its asymptotic value. This allows selecting the required number of successes, r, to meet a prescribed quality irrespective of the unknown p. In addition, the proposed estimators are shown to be approximately minimax when a/b does not deviate too much from 1, and asymptotically minimax as r→∞ when a=b.

Complexity in the Optimisation of ATM Performance Metrics

Today's motivation for autonomous systems research stems out of the fact that networked environments have reached a level of complexity and heterogeneity that make their control and management by solely human administrators more and more difficult. The optimisation of performance metrics for the air traffic management system, like in other networked system, has become more complex with increasing number of flights, capacity constraints, environmental factors and safety regulations. It is anticipated that a new structure of planning layers and the introduction of higher levels of automation will reduce complexity and will optimise the performance metrics of the air traffic management system. This paper discusses the complexity of optimising air traffic management performance metrics and proposes a way forward based on higher levels of automation.

Estimation of a probability in inverse binomial sampling under normalized linear-linear and inverse-linear loss

Sequential estimation of the success probability $p$ in inverse binomial sampling is considered in this paper. For any estimator $\hatvap$, its quality is measured by the risk associated with normalized loss functions of linear-linear or inverse-linear form. These functions are possibly asymmetric, with arbitrary slope parameters $a$ and $b$ for $\hatvap < p$ and $\hatvap > p$ respectively. Interest in these functions is motivated by their significance and potential uses, which are briefly discussed. Estimators are given for which the risk has an asymptotic value as $p \rightarrow 0$, and which guarantee that, for any $p \in (0,1)$, the risk is lower than its asymptotic value. This allows selecting the required number of successes, $\nnum$, to meet a prescribed quality irrespective of the unknown $p$. In addition, the proposed estimators are shown to be approximately minimax when $a/b$ does not deviate too much from $1$, and asymptotically minimax as $\nnum \rightarrow \infty$ when $a=b$.

Systems in Engineering Education: account of an experience

Systems Engineering (SE in the following) has not received much attention as a subject matter in engineering curricula. There are several dozens of universities around the world offering programs (most of them at the graduate level) on systems science and engineering. However, SE is, per se, rarely found among the courses offered by engineering schools. This observation does not strictly mean that systems concepts be left apart. For example, it is usual to find specialized courses for systems of some particular classes (e.g., courses on software systems engineering for computing curricula) or for particular phases of the system life cycle (e.g., courses on systems analysis). Even so, these kinds of courses tend to over-emphasize the importance of specific methodologies and, in consequence, to deviate the attention from the realm of systernness

Large-Scale smart grids as system of systems

Smart Grids are advanced power networks that introduce intelligent management, control, and operation systems to address the new challenges generated by the growing energy demand and the appearance of renewal energies. In the literature, Smart Grids are presented as an exemplar SoS: systems composed of large heterogeneous and independent systems that leverage emergent behavior from their interaction. Smart Grids are currently scaling up the electricity service to millions of customers. These Smart Grids are known as Large-Scale Smart Grids. From the experience in several projects about Large-Scale Smart Grids, this paper defines Large-Scale Smart Grids as a SoS that integrate a set of SoS and conceptualizes the properties of this SoS. In addition, the paper defines the architectural framework for deploying the software architectures of Large-Scale Smart Grid SoS.

Energy Storage Systems for Electric Vehicles: Performance Comparison based on a Simple Equivalent Circuit and Experimental Tests

The decision to select the most suitable type of energy storage system for an electric vehicle is always difficult, since many conditionings must be taken into account. Sometimes, this study can be made by means of complex mathematical models which represent the behavior of a battery, ultracapacitor or some other devices. However, these models are usually too dependent on parameters that are not easily available, which usually results in nonrealistic results. Besides, the more accurate the model, the more specific it needs to be, which becomes an issue when comparing systems of different nature. This paper proposes a practical methodology to compare different energy storage technologies. This is done by means of a linear approach of an equivalent circuit based on laboratory tests. Via these tests, the internal resistance and the self-discharge rate are evaluated, making it possible to compare different energy storage systems regardless their technology. Rather simple testing equipment is sufficient to give a comparative idea of the differences between each system, concerning issues such as efficiency, heating and self-discharge, when operating under a certain scenario. The proposed methodology is applied to four energy storage systems of different nature for the sake of illustration.

Digital Coherent Receivers and Advanced Optical Modulation Formats in 100 and 200 Gb/s DWDM Systems

Recent advances in coherent optical receivers is reviewed. Digital-Signal-Processing (DSP) based phase and polarization management techniques make coherent detection robust and feasible. With coherent detection, the complex field of the received optical signal is fully recovered, allowing compensation of linear and nonlinear optical impairments including chromatic dispersion (CD) and polarization-mode dispersion (PMD) using digital filters. Coherent detection and advanced optical modulation formats have become a key ingredient to the design of modern dense wavelength-division multiplexed (DWDM) optical broadband networks. In this paper, firstly we present the different subsystems of a digital coherent optical receiver, and secondly, we will compare the performance of some multi-level and multi-dimensional modulation formats in some physical impairments and in high spectral-efficiency (SE) and high-capacity DWDM transmissions, simulating the DSP with Matlab and the optical network performance with OptiSystem software.

Analysis of the railway track as a spatially periodic structure

This article presents a new and computationally efficient method of analysis of a railway track modelled as a continuous beam of 2N spans supported by elastic vertical springs. The main feature of this method is its important reduction in computational effort with respect to standard matrix methods of structural analysis. In this article, the whole structure is considered to be a repetition of a single one. The analysis presented is applied to a simple railway track model, i.e. to a repetitive beam supported on vertical springs (sleepers). The proposed method of analysis is based on the general theory of spatially periodic structures. The main feature of this theory is the possibility to apply Discrete Fourier Transform (DFT) in order to reduce a large system of q(2N + 1) linear stiffness equilibrium equations to a set of 2N + 1 uncoupled systems of q equations each. In this way, a dramatic reduction of the computational effort of solving the large system of equations is achieved. This fact is particularly important in the analysis of railway track structures, in which N is a very large number (around several thousands), and q = 2, the vertical displacement and rotation, is very small. The proposed method allows us to easily obtain the exact solution given by Samartín [1], i.e. the continuous beam railway track response. The comparison between the proposed method and other methods of analysis of railway tracks, such as Lorente de Nó and Zimmermann-Timoshenko, clearly shows the accuracy of the obtained results for the proposed method, even for low values of N. In addition, identical results between the proposed and the Lorente methods have been found, although the proposed method seems to be of simpler application and computationally more efficient than the Lorente one. Small but significative differences occur between these two methods and the one developed by Zimmermann-Timoshenko. This article also presents a detailed sensitivity analysis of the vertical displacement of the sleepers. Although standard matrix methods of structural analysis can handle this railway model, one of the objectives of this article is to show the efficiency of DFT method with respect to standard matrix structural analysis. A comparative analysis between standard matrix structural analysis and the proposed method (DFT), in terms of computational time, input, output and also software programming, will be carried out. Finally, a URL link to a MatLab computer program list, based on the proposed method, is given

Securing implementations of feedback-shift-register-based ciphers using compiler optimizations and co-processors

Los algoritmos basados en registros de desplazamiento con realimentación (en inglés FSR) se han utilizado como generadores de flujos pseudoaleatorios en aplicaciones con recursos limitados como los sistemas de apertura sin llave. Se considera canal primario a aquel que se utiliza para realizar una transmisión de información. La aparición de los ataques de canal auxiliar (en inglés SCA), que explotan información filtrada inintencionadamente a través de canales laterales como el consumo, las emisiones electromagnéticas o el tiempo empleado, supone una grave amenaza para estas aplicaciones, dado que los dispositivos son accesibles por un atacante. El objetivo de esta tesis es proporcionar un conjunto de protecciones que se puedan aplicar de forma automática y que utilicen recursos ya disponibles, evitando un incremento sustancial en los costes y alargando la vida útil de aplicaciones que puedan estar desplegadas. Explotamos el paralelismo existente en algoritmos FSR, ya que sólo hay 1 bit de diferencia entre estados de rondas consecutivas. Realizamos aportaciones en tres niveles: a nivel de sistema, utilizando un coprocesador reconfigurable, a través del compilador y a nivel de bit, aprovechando los recursos disponibles en el procesador. Proponemos un marco de trabajo que nos permite evaluar implementaciones de un algoritmo incluyendo los efectos introducidos por el compilador considerando que el atacante es experto. En el campo de los ataques, hemos propuesto un nuevo ataque diferencial que se adapta mejor a las condiciones de las implementaciones software de FSR, en las que el consumo entre rondas es muy similar. SORU2 es un co-procesador vectorial reconfigurable propuesto para reducir el consumo energético en aplicaciones con paralelismo y basadas en el uso de bucles. Proponemos el uso de SORU2, además, para ejecutar algoritmos basados en FSR de forma segura. Al ser reconfigurable, no supone un sobrecoste en recursos, ya que no está dedicado en exclusiva al algoritmo de cifrado. Proponemos una configuración que ejecuta múltiples algoritmos de cifrado similares de forma simultánea, con distintas implementaciones y claves. A partir de una implementación sin protecciones, que demostramos que es completamente vulnerable ante SCA, obtenemos una implementación segura a los ataques que hemos realizado. A nivel de compilador, proponemos un mecanismo para evaluar los efectos de las secuencias de optimización del compilador sobre una implementación. El número de posibles secuencias de optimizaciones de compilador es extremadamente alto. El marco de trabajo propuesto incluye un algoritmo para la selección de las secuencias de optimización a considerar. Debido a que las optimizaciones del compilador transforman las implementaciones, se pueden generar automáticamente implementaciones diferentes combinamos para incrementar la seguridad ante SCA. Proponemos 2 mecanismos de aplicación de estas contramedidas, que aumentan la seguridad de la implementación original sin poder considerarse seguras. Finalmente hemos propuesto la ejecución paralela a nivel de bit del algoritmo en un procesador. Utilizamos la forma algebraica normal del algoritmo, que automáticamente se paraleliza. La implementación sobre el algoritmo evaluado mejora en rendimiento y evita que se filtre información por una ejecución dependiente de datos. Sin embargo, es más vulnerable ante ataques diferenciales que la implementación original. Proponemos una modificación del algoritmo para obtener una implementación segura, descartando parcialmente ejecuciones del algoritmo, de forma aleatoria. Esta implementación no introduce una sobrecarga en rendimiento comparada con las implementaciones originales. En definitiva, hemos propuesto varios mecanismos originales a distintos niveles para introducir aleatoridad en implementaciones de algoritmos FSR sin incrementar sustancialmente los recursos necesarios. ABSTRACT Feedback Shift Registers (FSR) have been traditionally used to implement pseudorandom sequence generators. These generators are used in Stream ciphers in systems with tight resource constraints, such as Remote Keyless Entry. When communicating electronic devices, the primary channel is the one used to transmit the information. Side-Channel Attack (SCA) use additional information leaking from the actual implementation, including power consumption, electromagnetic emissions or timing information. Side-Channel Attacks (SCA) are a serious threat to FSR-based applications, as an attacker usually has physical access to the devices. The main objective of this Ph.D. thesis is to provide a set of countermeasures that can be applied automatically using the available resources, avoiding a significant cost overhead and extending the useful life of deployed systems. If possible, we propose to take advantage of the inherent parallelism of FSR-based algorithms, as the state of a FSR differs from previous values only in 1-bit. We have contributed in three different levels: architecture (using a reconfigurable co-processor), using compiler optimizations, and at bit level, making the most of the resources available at the processor. We have developed a framework to evaluate implementations of an algorithm including the effects introduced by the compiler. We consider the presence of an expert attacker with great knowledge on the application and the device. Regarding SCA, we have presented a new differential SCA that performs better than traditional SCA on software FSR-based algorithms, where the leaked values are similar between rounds. SORU2 is a reconfigurable vector co-processor. It has been developed to reduce energy consumption in loop-based applications with parallelism. In addition, we propose its use for secure implementations of FSR-based algorithms. The cost overhead is discarded as the co-processor is not exclusively dedicated to the encryption algorithm. We present a co-processor configuration that executes multiple simultaneous encryptions, using different implementations and keys. From a basic implementation, which is proved to be vulnerable to SCA, we obtain an implementation where the SCA applied were unsuccessful. At compiler level, we use the framework to evaluate the effect of sequences of compiler optimization passes on a software implementation. There are many optimization passes available. The optimization sequences are combinations of the available passes. The amount of sequences is extremely high. The framework includes an algorithm for the selection of interesting sequences that require detailed evaluation. As existing compiler optimizations transform the software implementation, using different optimization sequences we can automatically generate different implementations. We propose to randomly switch between the generated implementations to increase the resistance against SCA.We propose two countermeasures. The results show that, although they increase the resistance against SCA, the resulting implementations are not secure. At bit level, we propose to exploit bit level parallelism of FSR-based implementations using pseudo bitslice implementation in a wireless node processor. The bitslice implementation is automatically obtained from the Algebraic Normal Form of the algorithm. The results show a performance improvement, avoiding timing information leakage, but increasing the vulnerability against differential SCA.We provide a secure version of the algorithm by randomly discarding part of the data obtained. The overhead in performance is negligible when compared to the original implementations. To summarize, we have proposed a set of original countermeasures at different levels that introduce randomness in FSR-based algorithms avoiding a heavy overhead on the resources required.